summaryrefslogtreecommitdiff
path: root/payloads/libpayload/Config.in
AgeCommit message (Collapse)Author
2015-06-03libpayload: usb: Support MTK xHCI host controllerYidi Lin
1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-18libpayload: add mediatek timer driverYidi Lin
Change-Id: Ifb19cf97d4db6c7394521e549968a0cfb6ed1c75 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0137652ca07e290bb3cb1cc82a00b44ac7bcc7bf Original-Change-Id: Ica649927d3533c847b24e520e8fe73d75fb9e786 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/257375 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10170 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: add timer driver for cygnusDaisuke Nojiri
BUG=chrome-os-partner:36011 BRANCH=broadcom-firmware TEST=measured 10 seconds in depthcharge: Starting depthcharge on purin... dpch: time 10 9 8 7 6 5 4 3 2 1 0 Change-Id: I0bcb01c255b19518bb8440111ac81f056c07ed69 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f5993bd400dd5d38e62d07bc8ce3513175e0d518 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/200569 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: Id83aae29cec6320d897e0b231d023a9ee885903e Original-Reviewed-on: https://chromium-review.googlesource.com/256415 Reviewed-on: http://review.coreboot.org/9850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21cygnus: enable serial driver for depthchargeDaisuke Nojiri
BUG=chrome-os-partner:35807 BRANCH=broadcom-firmware TEST=tested input and output by the cli in depthcharge Change-Id: Icd517a366a3fe5bdcf9e9aeb4284d7e4378ee3f2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 02c3b6c82d9d71beb19a0879591c754fa7685362 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/200568 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I97144fc6f19969b8cf3872939c9c74efaef3604b Original-Reviewed-on: https://chromium-review.googlesource.com/256413 Reviewed-on: http://review.coreboot.org/9844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload: Add USB device mode driverPatrick Georgi
Add a framework for USB device mode controllers and a driver for the ChipIdea controller which is part of the tegra platform. TODO: - fix USB detach/attach - implement zero length packet handling properly BUG=chrome-os-partner:35861 TEST=none BRANCH=none Change-Id: I8defeea78b5a3bdbf9c1b1222c2702eaf3256b81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 542332291880c4026a05a960ceb91d37891ee018 Original-Change-Id: Ib4068d201dd63ebeda80157bd3130f3059919cdd Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/243272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17purin: add basic set of files for libpayloadDaisuke Nojiri
BUG=none BRANCH=tot TEST=emerge-purin libpayload depthcharge coreboot chromeos-bootimage Change-Id: I6a46067a288ecea352a2724c62c62066e3f4a383 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 355371317dde0546fbab2cd109bc17463f77c4fd Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I8c43acc4d270c3b2d7c18af07c077a553e3c6f6f Original-Reviewed-on: https://chromium-review.googlesource.com/245492 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9753 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14libpayload: Add dwc2 usb driverhuang lin
BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/211053 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10serial: Combine Tegra and Rockchip UARTs to generic 8250_mmio32Julius Werner
We have two drivers for a 100%-identical peripheral right now, mostly because we couldn't come up with a good common name for it back when we checked it in. That seems like a pretty silly reason in the long run. Both Tegra and Rockchip SoCs contain UARTs that use the common 8250 register interface (at least for the very basic byte-per-byte transmit and receive parts we care about), memory-mapped with a 32-bit register stride. This patch combines them to a single 8250_mmio32 driver (which also fixes a problem when booting Rockchip without serial enabled, since that driver forgot to check for serial initialization when registering its console drivers). The register accesses are done using readl/writel (as Rockchip did before), since the registers are documented as 32-bit length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce APB accesses to have the full word length. Also fixed checkpatch stuff. A day may come when we can also merge this driver into the (completely different, with more complicated features and #ifdefs) 8250 driver for x86 (which has MMIO support for 8-bit register stride only), both here and in coreboot. But it is not this day. This day I just want to get rid of a 99% identical file without expending too much effort. BUG=None TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial enabled, both worked fine (although Veyron has another kernel issue). Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8 Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225102 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9387 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-08libpayload: Add drivers for bg4cdDaisuke Nojiri
BUG=chrome-os-partner:32772 BRANCH=none TEST=Built chromeos-bootimage Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I15cb40532855c89f6fb959652a7e874897eb45bb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f8419fe22cf39d827e566b8f4dbe0680e4106a1 Original-Change-Id: I97f2ac8ffc7232c7a6c6d40deb8a35630d3d62a7 Original-Reviewed-on: https://chromium-review.googlesource.com/222662 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9360 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23libpayload: EHCI: Support root-hub TT featureJim Lin
If EHCI controller has TT (Transaction Translator) support in root-hub, then we need to keep control over this controller when USB keyboard (low-speed device) is connected to root-hub port. Need to add "CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT=y" to config file (e.g. payloads/libpayload/configs/config.nyan_big) to support this feature. BUG=chrome-os-partner:32355 TEST=Tested on nyan_big platform. Press ESC+REFRESH+POWER keys on internal keyboard to power up. Press Left Arrow or Right Arrow on USB keyboard to switch between "English" and "Default Locale" in coreboot UI. Or unplug and plug in device and try again. Root hub <- low-speed USB keyboard Root hub <- full-speed hub <- low-speed USB keyboard Root hub <- high-speed hub <- low-speed USB keyboard Change-Id: Iaa2823f64c8769fc808ee7a316c378f18f004e63 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ad57fd673d6dc8814fe99a4ac420566bb17e77b Original-Change-Id: Id86a289bc587653b85227c1d50f7a4f476f37983 Original-Signed-off-by: Jim Lin <jilin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/220125 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8737 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21libpayload: arch/mips: Add basic MIPS architecture supportIonela Voinescu
Add the basic build infrastructure and architectural support required to build for targets using the MIPS architecture. This will require the addition of cache maintenance. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA with Depthcharge as payload; successfully executed payload. BRANCH=none Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf Original-Reviewed-on: https://chromium-review.googlesource.com/219740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8741 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-12libpayload: Add Rock Chip drivershuang lin
Add support: 1)Support driver rktimer 2)Support driver rkserial BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Original-Change-Id: I2cccedf3b62883dd372842a7972e93f2ebbfb282 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/206184 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> (cherry picked from commit 387450d7c36b201bd177d46eb9f1d280fc043aab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia6b7a8ee2439a6f2bf7577df822d3f4f3a1e441c Reviewed-on: http://review.coreboot.org/8127 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-01-09libpayload: Add remote GDB supportJulius Werner
This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09libpayload: Introduce new Kconfig to explicitly allow GPL codeJulius Werner
There have been leaks of GPL code into libpayload for a while now, for new features or improvements that require third party code with no adequate alternative among BSD-licensed software. It seems silly and counter-productive to keep holding back features and performance improvements from libpayload for a use-case (proprietary payloads) that doesn't even seem to be implemented anywhere to date. Open-source payloads should not need to suffer to appease commercial ones. Instead, this patch introduces a new Kconfig option to explicitly allow inclusion of GPL code. It will use Kconfig dependencies and/or Makefile rules to ensure that no GPL code can end up in the final payload if that option is unset, allowing proprietary payloads to keep working with the existing BSD-licensed feature set. New features and patches (that are sufficiently separate and self-contained to allow guarding through this config option) can choose whether to import GPL code, and need to depend on this option if they do. Also clean up all (known) existing uses of GPL code to depend on the new option, add some recent third-party imports to the LICENSES file, and relicense the selfboot.c files to BSD with permission of the author. BUG=chrome-os-partner:24957 TEST=Compiled Falco and Nyan_Big both with and without the new option, disassembled output binaries to ensure that memcpy() looks as expected. Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203513 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I446fef028264c793b946dd9f765e446bf708b4db Reviewed-on: http://review.coreboot.org/8118 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-09libpayload: Add support for arm64 in libpayloadFurquan Shaikh
Basic support for arm64 is enabled in libpayload. Features added: 1) mem* operations in assembly. 2) Basic exception handling and support for testing exceptions. 3) Caching support. Tested with arm64-generic board compilation. BUG=None BRANCH=None TEST=Compilation successful Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/187067 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251 Reviewed-on: http://review.coreboot.org/8063 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-01-06libpayload: ipq808x: introduce uart driverVadim Bendebury
This adds a UART driver for the ipq8064 controller. It still does not quite work in the receive direction - the receive FIFO returns read data in 32 bit chunks, which means that 4 keys need to be pressed before a character pops out of the driver (and it reports it as a single character). This issue is being addressed separately, the driver is being checked in to facilitate concurrent development. BUG=chrome-os-partner:27784, chrome-os-partner:29313 TEST=with deptcharge modifications in place, the AP148 board comes up to the depthcharge prompt: Starting depthcharge on storm... Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202045 Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc Reviewed-on: http://review.coreboot.org/8061 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04libpayload: ipq8064: Add rudimentary timer driverVadim Bendebury
This is still using the 32kHz timer coreboot uses. A finer granularity timer implementation for 806x is in the works. BUG=chrome-os-partner:27784,chrome-os-partner:28880 TEST=none yet. Original-Change-Id: Iae206749000d45040090df48199c8d86d76bbae5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198021 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 8f49f752ab8f84b7c5dc189238732360e8d2aae2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia150c974e5b66939de0b007cf7c1308c187f3289 Reviewed-on: http://review.coreboot.org/8002 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-30libpayload: Remove PC Keyboard from ARM buildMarc Jones
The keyboard.c uses IO cycles to access the legacy PC keyboard device. ARM can't do IO cycles, so remove the option for ARM configs. Change-Id: Ifc6c2368563f27867f4babad5afdde0e78f4cf78 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7922 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-13libpayload: Add minimal support for PL011 UARTMarcelo Povoa
This creates a new PL011 config variable which avoids the infinite busy wait on serial_putchar() because the register mapping is not compatible with current implementation. BUG=None BRANCH=none TEST=printf() works on the PL011 based ARMv8 foundation model Original-Change-Id: I9feda35a50a3488fc504d1561444161e0889deda Original-Signed-off-by: Marcelo Povoa <marcelogp@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/187020 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 85779a34a161c324cc8af995ada4393137275f20) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: payloads/libpayload/Config.in payloads/libpayload/drivers/serial.c Change-Id: I23c8b3728cd7d2d7692b3e86a679e061e88f7bb5 Reviewed-on: http://review.coreboot.org/7422 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13libpayload: timer: Move the timer drivers from depthcharge to libpayload.Gabe Black
These drivers are needed right away and never really fit into depthcharge's driver model anyway. CQ-DEPEND=CL:194064 BUG=None TEST=Built and booted nyan, link, and peach_pit and verified that timer values in cbmem were reasonable. Built for nyan_big, nyan_blaze and daisy. BRANCH=None Original-Change-Id: Ia7953cfece57524262a6c7d6537082af7a00f4d6 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194058 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit f30a410f0a248c93bc34f5868af1596bf8ce3cdd) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I782d20f3cd63210a87c712643c7a53753f5ef301 Reviewed-on: http://review.coreboot.org/7225 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-11-09libpayload: serial: Move the depthcharge serial drivers into libpayload.Gabe Black
These drivers need to be ready right away and never really fit into the depthcharge driver model anyway. CQ-DEPEND=CL:194063 BUG=None TEST=Built and booted on nyan and peach_pit. Built for nyan_big, nyan_blaze, and daisy. BRANCH=None Original-Change-Id: I9570dee53c57d42ef4cd956f66a878ce39a2dc20 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194057 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 26e18f680c93fc990a3d1057c164f19859634a9f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia2233e2bd821d8de8d2d57a9423aeb74be7efd93 Reviewed-on: http://review.coreboot.org/7224 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-08-28libpayload: Change CONFIG_X86_SERIAL_CONSOLE to CONFIG_8250_SERIAL_CONSOLEGabe Black
While the 8250 compatible serial port driver is primarily useful on x86 systems because it works with the legacy x86 com ports, some devices which aren't x86 based have 8250 compatible UARTs as well. This change renames the CONFIG_X86_SERIAL_CONSOLE option to the more general and direct CONFIG_8250_SERIAL_CONSOLE and fixes up the dependencies so that non-x86 systems can enable the driver, although it will default to on on x86 and off otherwise. Also, the default IO port address that's added to the sysinfo structure on x86 and which is intended to be overwritten by a value in the coreboot tables is not used on ARM. That variable is adjusted so that it's more clear it's a default value, and made dependent on x86 since that's the only place its value is actually used. Change-Id: Ifeaade0e7bd76d382426e947275a9c933da4930e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170834 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a10e39a2da3cb0bfb316c0869cf5025078e287f) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6655 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-28libpayload: usb: Allow direct instantiation of MMIO host controllersJulius Werner
The existing USB_MEMORY mechanism to instantiate non-PCI host controllers is clunky and inflexible... most importantly, it doesn't allow multiple host controllers of the same kind. This patch replaces it with a function that allows payloads to directly instantiate as many host controllers of whatever type they need. Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169454 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
This is mostly a rewrite, don't even try to read a diff. Tested with an internal rate matching hub on a QM77 board and three hubs integrated into DELL monitors. Change-Id: Ib12fa2aa90af4e0f37143d2ed92c4a1705b6d774 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3451 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
The current drivers for external usb hubs and root hubs all follow the same pattern. Before adding another one with 90% of the same code, extract the common parts and rewrite them with a simple interface. This also adds debouncing of new attachments. Current drivers just waited 100ms before they reset the device. However, we should check if the device becomes disconnected and reconnected during this period. Porting of the current hub drivers will take place in separate commits (when I have time to test the older HCIs). Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3450 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-25libpayload: Fix Config.in warningStefan Reinauer
PDcurses is already default. Hence drop the additional attempt that is not supported by Kconfig. Config.in:123:warning: defaults for choice values not supported Change-Id: I12cb5ea0bef2f146cf237c7a3cc9293a600d736b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2902 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-13libpayload: Make whether or not there's an IO address space configurableGabe Black
Default it to no to be consistent with the other architecture wide options (endianness), and turn it on explicitly for x86 and PowerPC. Change-Id: Idda26d580156bbbf08ea11b28abe75cfa6b594b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2658 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-16libpayload: only compile drivers/serial.c on machines that use it.Ronald G. Minnich
Create a new serial console variable, X86_SERIAL_CONSOLE which is only enabled when SERIAL_CONSOLE and ARCH_X86 are defined. Builds for x86 and ARM. Change-Id: I607253c418de015975a839e3c33577842885ec0c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2412 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-09libpayload: Add an option to skip console initialization on startup.Gabe Black
A payload may want to decide whether it uses certain input/output consoles, or that it wants support for outputing to a particular device but not to use that device as a console. This change adds a config option which skips the call to console_init in start_main. Change-Id: I32b224d4d0bd3a239b402ecb09ee907d53225735 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1732 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Add support for the CBMEM in memory console.Gabe Black
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-08-04libpayload: Add liblzma, libcbfsPatrick Georgi
Add cbfs core from coreboot into libpayload, and to support lzma decode, add coreboot's lzma code, too. Carl-Daniel agreed to relicense the lzmadecode wrapper as BSD-l, solving licensing problems. Change-Id: Id28990fe7e951d99447e265a4880d70a8f208dd2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04libpayload: Add PDCurses and ncurses' libform/libmenuPatrick Georgi
PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-30Reduce warnings/errors in libpayload when using picky compiler optionsPatrick Georgi
The new build system uses quite a few more -W flags for the compiler by default than the old one. And that's for the better. Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/72 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2010-09-25Add an EHCI driver to libpayload's USB stack.Patrick Georgi
Interrupt transfer support is missing (ie. no keyboard), bulk and control transfers work (ie. mass storage). Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13Add support for OHCI controllers and prelimiary support for xHCI (USB3) ↵Patrick Georgi
controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25libpayload updateStefan Reinauer
* rework Config.in * add string_to_args function to actually make getopt usable. * add strchr * add strlcat * some malloc fixes (exposed by the USB stack) * add malloc debugging (thanks to Matthias Krause from Secunet!) * make LAR support optional, it's not really used anymore * (define htoX macros for ppc) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5298 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25Add coreboot framebuffer support to libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5295 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21This change adds PPC support to libpayload, and hooks it up in the buildPatrick Georgi
process. The PPC support is still stubbed, with commented out x86 code as guide line for an implementor. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-20[PATCH] libpayload: Add multiboot supportJordan Crouse
Make libpayload applications multiboot compatible. Add the multiboot OS table and grok the loader table, especially the memory map and the command line. This makes libpayload applications loadable by GRUB. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-08libpayload: Rename Geode video driver to Geode LX video driver.Peter Stuge
This is simply wrong, the "Geode" video driver is only good for LX and one of our users got bit by this just now. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3642 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-26* add keyboard layout support to libpayloadStefan Reinauer
* add a reset handler mechanism (CTRL-ALT-DEL) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3605 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-02This patch adds USB capabilities to libpayload. It requires somePatrick Georgi
memalign implementation (eg. the one I sent yesterday). Features: - UHCI controller driver - UHCI root hub driver - USB MSC (Mass Storage Class) driver - skeleton of a USB HID driver (requires better interrupt transfer handling, which is TODO) - skeleton of a USB hub driver (needs several blank spots filled in, eg. power management. Again: TODO) OHCI and EHCI are not supported, though OHCI support should be rather easy as the stack provides reasonable abstractions (or so I hope). EHCI will probably be more complicated. Isochronous transfers (eg. webcams, audio stuff, ...) are not supported. They can be, but I doubt we'll have a reason for that in the boot environment. The MSC driver was tested against a couple of USB flash drives, and should be reasonably tolerant by now. But I probably underestimate the amount of bugs present in USB flash drives, so feedback is welcome. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-18Add a kconfig option to choose between outputing ACS characters orUlf Jordan
their plain ASCII fallbacks over serial console. Signed-off-by: Ulf Jordan <jordan@chalmers.se> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3517 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08new menu structure for libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3488 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08Update the kconfig copy in libpayload to a much more recent one. AmongUwe Hermann
other things this supposedly also fixes a number of build issues on Mac OS X. This is more or less the same version (i.e. equally recent) as we have in coreinfo and buildrom now. This patch also includes the libintl.h fix from r3475 (coreinfo). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-11Various small consistency fixes (trivial):Uwe Hermann
- Use _FOO_H include guard format everywhere. - Add missing speaker.c prototypes to libpayload.h. - Consistently use short form u8/u16/u32 instead of uint8_t et. al. - kcofig: Use 'depends on' instead of 'depends', which seems deprecated. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-11libpayload: Add a Geode video driverJordan Crouse
Add a Geode video driver in lieu of VGA on Geode LX devices Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-10libpayload: Add video console frameworkJordan Crouse
Add a framework for multiple video console drivers. This is to prepare for the Geode driver. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Fix the NVRAM access functions to work correctly for theUwe Hermann
upper 128 bytes of NVRAM (if enabled). For most chipsets this means using I/O ports 0x72/0x73, but at least on some VIA chipsets (I tested the VIA VT8237R on actual hardware) these ports won't work and you have to use 0x74/0x75. Thus, make this a Kconfig option for now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Whitespace fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3201 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Due to popular demand, rename "CMOS" to "NVRAM" (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-27Add initial support for some basic CMOS read/write functions and theUwe Hermann
bcd2dec()/dec2bcd() functions we'll need for (among other things) converting some date/time parameters in CMOS. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3192 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-21Cosmetics, fix typos (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19libpayload: The initial chunk of code writen by AMDJordan Crouse
This is the initial chunk of code written by me and copyrighted by AMD. Includes everything but a few files that we pulled from outside sources. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3170 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1