summaryrefslogtreecommitdiff
path: root/payloads/libpayload/Config.in
AgeCommit message (Collapse)Author
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-08-28libpayload: Change CONFIG_X86_SERIAL_CONSOLE to CONFIG_8250_SERIAL_CONSOLEGabe Black
While the 8250 compatible serial port driver is primarily useful on x86 systems because it works with the legacy x86 com ports, some devices which aren't x86 based have 8250 compatible UARTs as well. This change renames the CONFIG_X86_SERIAL_CONSOLE option to the more general and direct CONFIG_8250_SERIAL_CONSOLE and fixes up the dependencies so that non-x86 systems can enable the driver, although it will default to on on x86 and off otherwise. Also, the default IO port address that's added to the sysinfo structure on x86 and which is intended to be overwritten by a value in the coreboot tables is not used on ARM. That variable is adjusted so that it's more clear it's a default value, and made dependent on x86 since that's the only place its value is actually used. Change-Id: Ifeaade0e7bd76d382426e947275a9c933da4930e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170834 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a10e39a2da3cb0bfb316c0869cf5025078e287f) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6655 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-28libpayload: usb: Allow direct instantiation of MMIO host controllersJulius Werner
The existing USB_MEMORY mechanism to instantiate non-PCI host controllers is clunky and inflexible... most importantly, it doesn't allow multiple host controllers of the same kind. This patch replaces it with a function that allows payloads to directly instantiate as many host controllers of whatever type they need. Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169454 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
This is mostly a rewrite, don't even try to read a diff. Tested with an internal rate matching hub on a QM77 board and three hubs integrated into DELL monitors. Change-Id: Ib12fa2aa90af4e0f37143d2ed92c4a1705b6d774 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3451 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
The current drivers for external usb hubs and root hubs all follow the same pattern. Before adding another one with 90% of the same code, extract the common parts and rewrite them with a simple interface. This also adds debouncing of new attachments. Current drivers just waited 100ms before they reset the device. However, we should check if the device becomes disconnected and reconnected during this period. Porting of the current hub drivers will take place in separate commits (when I have time to test the older HCIs). Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3450 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-25libpayload: Fix Config.in warningStefan Reinauer
PDcurses is already default. Hence drop the additional attempt that is not supported by Kconfig. Config.in:123:warning: defaults for choice values not supported Change-Id: I12cb5ea0bef2f146cf237c7a3cc9293a600d736b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2902 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-13libpayload: Make whether or not there's an IO address space configurableGabe Black
Default it to no to be consistent with the other architecture wide options (endianness), and turn it on explicitly for x86 and PowerPC. Change-Id: Idda26d580156bbbf08ea11b28abe75cfa6b594b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2658 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-16libpayload: only compile drivers/serial.c on machines that use it.Ronald G. Minnich
Create a new serial console variable, X86_SERIAL_CONSOLE which is only enabled when SERIAL_CONSOLE and ARCH_X86 are defined. Builds for x86 and ARM. Change-Id: I607253c418de015975a839e3c33577842885ec0c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2412 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-09libpayload: Add an option to skip console initialization on startup.Gabe Black
A payload may want to decide whether it uses certain input/output consoles, or that it wants support for outputing to a particular device but not to use that device as a console. This change adds a config option which skips the call to console_init in start_main. Change-Id: I32b224d4d0bd3a239b402ecb09ee907d53225735 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1732 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Add support for the CBMEM in memory console.Gabe Black
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-08-04libpayload: Add liblzma, libcbfsPatrick Georgi
Add cbfs core from coreboot into libpayload, and to support lzma decode, add coreboot's lzma code, too. Carl-Daniel agreed to relicense the lzmadecode wrapper as BSD-l, solving licensing problems. Change-Id: Id28990fe7e951d99447e265a4880d70a8f208dd2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04libpayload: Add PDCurses and ncurses' libform/libmenuPatrick Georgi
PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-30Reduce warnings/errors in libpayload when using picky compiler optionsPatrick Georgi
The new build system uses quite a few more -W flags for the compiler by default than the old one. And that's for the better. Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/72 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2010-09-25Add an EHCI driver to libpayload's USB stack.Patrick Georgi
Interrupt transfer support is missing (ie. no keyboard), bulk and control transfers work (ie. mass storage). Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-13Add support for OHCI controllers and prelimiary support for xHCI (USB3) ↵Patrick Georgi
controllers. Improve scanning for USB controllers. Limitations: - OHCI doesn't support interrupt transfers yet (ie. no keyboards) - xHCI just does initialization and device attach/detach so far Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5691 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25libpayload updateStefan Reinauer
* rework Config.in * add string_to_args function to actually make getopt usable. * add strchr * add strlcat * some malloc fixes (exposed by the USB stack) * add malloc debugging (thanks to Matthias Krause from Secunet!) * make LAR support optional, it's not really used anymore * (define htoX macros for ppc) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5298 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25Add coreboot framebuffer support to libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5295 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21This change adds PPC support to libpayload, and hooks it up in the buildPatrick Georgi
process. The PPC support is still stubbed, with commented out x86 code as guide line for an implementor. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-20[PATCH] libpayload: Add multiboot supportJordan Crouse
Make libpayload applications multiboot compatible. Add the multiboot OS table and grok the loader table, especially the memory map and the command line. This makes libpayload applications loadable by GRUB. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-08libpayload: Rename Geode video driver to Geode LX video driver.Peter Stuge
This is simply wrong, the "Geode" video driver is only good for LX and one of our users got bit by this just now. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3642 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-26* add keyboard layout support to libpayloadStefan Reinauer
* add a reset handler mechanism (CTRL-ALT-DEL) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3605 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-02This patch adds USB capabilities to libpayload. It requires somePatrick Georgi
memalign implementation (eg. the one I sent yesterday). Features: - UHCI controller driver - UHCI root hub driver - USB MSC (Mass Storage Class) driver - skeleton of a USB HID driver (requires better interrupt transfer handling, which is TODO) - skeleton of a USB hub driver (needs several blank spots filled in, eg. power management. Again: TODO) OHCI and EHCI are not supported, though OHCI support should be rather easy as the stack provides reasonable abstractions (or so I hope). EHCI will probably be more complicated. Isochronous transfers (eg. webcams, audio stuff, ...) are not supported. They can be, but I doubt we'll have a reason for that in the boot environment. The MSC driver was tested against a couple of USB flash drives, and should be reasonably tolerant by now. But I probably underestimate the amount of bugs present in USB flash drives, so feedback is welcome. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-18Add a kconfig option to choose between outputing ACS characters orUlf Jordan
their plain ASCII fallbacks over serial console. Signed-off-by: Ulf Jordan <jordan@chalmers.se> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3517 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08new menu structure for libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3488 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08Update the kconfig copy in libpayload to a much more recent one. AmongUwe Hermann
other things this supposedly also fixes a number of build issues on Mac OS X. This is more or less the same version (i.e. equally recent) as we have in coreinfo and buildrom now. This patch also includes the libintl.h fix from r3475 (coreinfo). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-11Various small consistency fixes (trivial):Uwe Hermann
- Use _FOO_H include guard format everywhere. - Add missing speaker.c prototypes to libpayload.h. - Consistently use short form u8/u16/u32 instead of uint8_t et. al. - kcofig: Use 'depends on' instead of 'depends', which seems deprecated. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-11libpayload: Add a Geode video driverJordan Crouse
Add a Geode video driver in lieu of VGA on Geode LX devices Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-10libpayload: Add video console frameworkJordan Crouse
Add a framework for multiple video console drivers. This is to prepare for the Geode driver. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Fix the NVRAM access functions to work correctly for theUwe Hermann
upper 128 bytes of NVRAM (if enabled). For most chipsets this means using I/O ports 0x72/0x73, but at least on some VIA chipsets (I tested the VIA VT8237R on actual hardware) these ports won't work and you have to use 0x74/0x75. Thus, make this a Kconfig option for now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Whitespace fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3201 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-31Due to popular demand, rename "CMOS" to "NVRAM" (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-27Add initial support for some basic CMOS read/write functions and theUwe Hermann
bcd2dec()/dec2bcd() functions we'll need for (among other things) converting some date/time parameters in CMOS. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3192 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-21Cosmetics, fix typos (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19libpayload: The initial chunk of code writen by AMDJordan Crouse
This is the initial chunk of code written by me and copyrighted by AMD. Includes everything but a few files that we pulled from outside sources. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3170 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 15:39:39 +0000