summaryrefslogtreecommitdiff
path: root/payloads/external
AgeCommit message (Collapse)Author
2018-01-23payloads/depthcharge: Update stable version upstream masterMartin Roth
Updating from commit id f3bb31fee: 2017-09-08 (vboot: Support EC early firmware selection) to commit 61cfcc3b: 2018-01-17 (meowth: Select CONFIG_DRIVER_BUS_SPI_INTEL_GSPI_VERSION_2) This brings in 57 new commits. Change-Id: Iadacc6017abbcc659e461d2fc27990ef8124871b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-20payloads/SeaBIOS: Add different MMIO uart configurationsPhilipp Deppenwiese
The MMIO address can change for different platforms like Apollolake. Change-Id: I6ec72d3a14f00212323a04e20d5a477dbc26b770 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-07payloads/external/Makefile: Add missing dependencyNico Huber
The depthcharge .config only exists after depthcharge was built. Other possible `PAYLOAD_CONFIG` files most probably miss a rule, too. Change-Id: I8e6f79bb2bd07cbef1317f2623bbef9ca0e74880 Signed-off-by: Nico Huber <nico.huber@secunet.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22137 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30payloads/external: Use stable version of GRUB2 by defaultJonathan Neuschäfer
Using the stable version by default is consistent with payloads/external/SeaBIOS. Change-Id: I444ba2daaf5ecc5edde907a7842013f88e1c4c9b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30payloads/external: Add a stable version of GRUB2Jonathan Neuschäfer
This should make reproducible builds of coreboot with GRUB2 easier. Change-Id: If855042945ab34f34c554e7490c811ec7b256980 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-28payloads/seabios: Update stable from 1.10.3 to 1.11.0Martin Kepplinger
SeaBIOS 1.11.0 was released on November 10th, 2017. Changes include * Initial support for NVME drives * Support for vga emulation over a serial port in SeaBIOS (sercon) * Support for serial debugging using MMIO based serial ports * Support for scsi devices with multiple LUNs * Support for boot-to-boot persistent coreboot cbmem logs * Improved coreboot vga (cbvga) mode setting compatibility * Several bug fixes and code cleanups See also https://www.seabios.org/Releases#SeaBIOS_1.11.0 and for all details on the changes, use git log --oneline rel-1.10.3..rel-1.11.0 in the SeaBIOS repository. Change-Id: Ie46a526593177c5241fbd979c7fa1934478f7382 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/22429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-08payloads/seabios: Update stable from 1.10.2 to 1.10.3Martin Kepplinger
SeaBIOS 1.10.3 was tagged on October 12th, 2017 with the following changes. ``` $ git log --oneline rel-1.10.2..rel-1.10.3 b7661dd tcgbios: Fix use of unitialized variable 6055583 boot: Increase description size in boot menu 3551613 resume: Don't attempt to use generic reboot mechanisms on QEMU ``` Change-Id: I3a9ebf10a55118fc35aed688ea7ec794333c8227 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/22358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-16payloads/external: Clone GRUB2 over HTTPSJonathan Neuschäfer
Since the git:// protocol is unencrypted and unauthenticated, there's a security risk associated with using it: A man-in-the-middle attacker could replace e.g. the master branch with malicious code. Mitigate this risk somewhat by cloning GRUB2 via HTTPS. Change-Id: Ice8f8d108e7dfa1a1ecd58d9735944fa9570ace8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-13Update vboot submodule to upstream masterDaisuke Nojiri
Updating from commit id 3f3a496a 2017-09-01 09:20:19 (image_signing: Fix loem.ini pattern for unibuilds) to commit id 753e34e9 2017-08-31 10:12:40 (futility: Make rwsig sign command produce EC_RW image) This brings in 5 new commits. This also updates Depthcharge stable commit ID. Updating from a843f262 2016-08-16 08:41:04 (kahlee: select emmc boot first if available) to commit id f3bb31fe 2017-08-15 17:15:33 (vboot: Support EC early firmware selection) This brings in 14 new commits. Change-Id: I17d034e87fa642c5e30e933eb98bcfe5ceaaa3a8 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06tint: Use the current time as random seedNicola Corna
Previously the random seed was fixed, which led to the same sequence of blocks for each run. Now that libpayload has time(), no change is needed in the function rand_init() of tint. Change-Id: I2e482bbb9d33cdbbf3c15916458329f99fbc4450 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/20980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-23Update depthcharge stable to upstream masterMartin Roth
Updating from commit id 5a086f5c - Tue Jul 11 23:57:30 2017: (ps8751: enable software sync.) to commit id a843f262 - Wed Aug 16 23:37:52 2017: (kahlee: select emmc boot first if available) This brings in 20 new commits. This matches with the updated vboot submodule. Change-Id: If030bc3e75dd470838590540880213bd841154b8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-20payloads/external/GRUB2: Only rebuild on config changesNico Huber
Change-Id: I376eea9a3e02b03010fc5c5a05199ea7b2813220 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-18payload/tianocore: Add patch to preserve coreboot tableArthur Heymans
Credit for this patch goes to 'ReddestDream'. The patch is pulled from https://github.com/MattDevo/edk2 TESTED on thinkpad X200. Change-Id: I1517607cee8308c5f5443c58c16ce44056611e92 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-15payloads/external/GRUB2: Sanitize MakefileNico Huber
We were explicitly passing CC and TARGET_CC to configure but overwrote that decision later by passing CC (with the value of TARGET_CC) directly to a recursive make call. The latter overwrite was introduced because `unexport` alone doesn't work on variables that were specified on a make command line (they are added to MAKEOVERRIDES and passed to further re- cursive make calls). Instead of unexporting random variables, unexport those that were actu- ally passed from payloads/external/Makefile.inc and clear MAKEOVERRIDES. Do not pass OBJDUMP as that is nowhere to be found in the GRUB sources. And, last but not least, add --disable-werror because building GRUB is very susceptible to changes in the flex version. Change-Id: Iaff2c72e89a5a540fe365eacb84811d5cff9d4d4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-11payloads/external/tianocore: Add and apply patches for tianocoreEvelyn Huang
Create a directory patches, and add necessary patches to be applied to upstream tianocore. Patches include: -Patch for no PCI address enumeration -Patches to enable keyboard input -Patch to disable serial to speed up boot process. Patches pulled from https://github.com/MattDevo/edk2. Additionally, modify tianocore Makefile to apply patches during build. Change-Id: I4eaa602418995a68753b1ed13af8c6374eaa312f Signed-off-by: Evelyn Huang <evhuang@google.com> Reviewed-on: https://review.coreboot.org/20639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-10payloads/external/tianocore: build UEFI payloadMartin Roth
Update the existing tianocore payload (which didn't do any more than adding an elf payload with a specific name) to fetch and build the UEFI corebootPayloadPackage, using the coreboot toolchain for compilation. Only checkout the commit when changing commit IDs or if version is master, instead of every time it builds. Currently working if patches are merged into the upstream edk2 repository (to be included in a follow-on patch). Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Evelyn Huang <evhuang@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-26payloads/depthcharge: Fix clean targetNico Huber
This line has a weird history. It got a `|| exit 0` removed lately which obviously was there to fix the presence of the superfluous `test` at the beginning. Now, remove the `test` too to make the clean target always succeed again ;) Change-Id: I9e069cf5d9ac8416cf350161439aa60798ef7b6b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20769 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-23depthcharge: Update buildMartin Roth
- Add prompt so the defconfig can be selected for the build. - Remove target rename code from makefile. The old versions don't build with the latest vboot, so this isn't useful anymore. - Change $(info ...) to an echo. info prints immediately when evaluated, which made it print when it shouldn't have, on make clean for example. - Split up single line shell scripts into multiple lines - Change checkout target to only update the commit id when actually changing versions instead of on every build. Change-Id: I46fc2822cf93c821b402e8961ceecedc088f486c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-07-23depthcharge: Update stable commit idMartin Roth
Update from commit eb583fa8 - Wed Mar 29, 2017 (rk3399_sdhci: Reintroduce PHY power-cycling at 52MHz) to commit 5a086f5c - Tue Jul 11, 2017 (ps8751: enable software sync) This brings the stable version of depthcharge forward by 74 commits. Change-Id: I3a3719fa3a91824042d452de7774be85b884d96d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-07payloads: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17payloads/seabios: Update stable from 1.10.1 to 1.10.2Paul Menzel
SeaBIOS 1.10.2 was released on February 28th, 2017 [1][2] with the changes below. ``` $ git log --oneline rel-1.10.1..rel-1.10.2 5f4c7b1 QEMU fw_cfg: Write fw_cfg back on S3 resume c45ca70 QEMU fw_cfg: Add functions for accessing files by key 31b6229 QEMU fw_cfg: Add command to write back address of file aa7219d romfile-loader: Switch to using named structs 2a1d88c QEMU DMA: Add DMA write capability d2ac564 ps2port: Disable keyboard/mouse prior to resetting ps2 controller b0e3c67 vgasrc: Increase debug level ca3ab93 ahci: Set upper 32-bit registers to zero ``` This fixes the problem on a Lenovo X60, that the keyboard is not initialized by SeaBIOS when for example loaded from GRUB. [1] https://www.seabios.org/Releases#SeaBIOS_1.10.2 Change-Id: Idc078ffa896b2e105faabd2d8befeaf9a2a0b6ac Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19290 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-14payloads/external/depthcharge: Update stable commit idMartin Roth
Update from commit 124af94f - Fri Feb 26, 2016 (skylake boards: unconditionally re-enable 8254 PIT for legacy) To commit eb583fa8 - Wed Mar 29, 2017 (rk3399_sdhci: Reintroduce PHY power-cycling at 52MHz) This brings the stable version of depthcharge forward by 325 commits. Change-Id: I31b3235df6d36409ff1b365e6adb6852281df097 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19220 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-14payloads/external/iPXE: Update stable versionMartin Roth
Update from commit 2afd66eb - Fri Jul 29, 2016 ([pixbuf] Enable PNG format by default) To commit fd6d1f46 - Fri Mar 31, 2017 ([thunderx] Use ThunderxConfigProtocol to obtain board configuration) This moves the stable iPXE commit forward 144 commits. Change-Id: Ia0c97f863be39632c9206ca95b3857047fc37e26 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19221 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-19tint: Add USB supportNicola Corna
Enable the USB during the initialization of tint. Without it USB keyboards don't work, which makes this payload pointless on systems where a PS/2 keyboard port isn't available. Based on I98f0ccdb19d6b195572941cf87ce3221f57db7c5 (tint and nvramcui: enable USB, update tint to 0.04+nmu1 with changes) [1] [1] https://review.coreboot.org/17507/ Change-Id: Iaa8dfac0301ef19a2d76a0975d025b00e7f3807b Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18766 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-28payloads/seabios: Add support for Hudson UARTRicardo Ribalda Delgado
Since version 9332965 "serialio: Support for mmap serial ports", SeaBIOS supports memory mapped serial ports. This patch automatically configures SeaBIOS when the Hudson UART is enabled. Change-Id: I072f6a957df7e143d790783546b0725bcd597d9c Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/18025 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-24payloads/external/GRUB2: Add "git revision" to the GRUB2 version menuDenis 'GNUtoo' Carikli
This change is based on the following commit: 3aa91dc payloads/seabios: Add "git revision" to the SeaBIOS version menu Change-Id: I9987e3673e70b5cb20173d1ddff6060f42a5374a Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/18352 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-17grub: Build module `boottime`Paul Menzel
Configure GRUB to build with boot time statistics. That allows users to add that module to GRUB by adding `boottime` to the list of extra modules. Change-Id: I76a07e49aecb37652fe8c7d6a9421fd464424287 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-02-01payloads/depthcharge: Allow generic libpayload configMarshall Dawson
Change depthcharge to not require a board-specific config file for libpayload. If the Kconfig option is selected, use the settings in libpayload/configs/defconfig instead. Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18271 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Specify revision to buildMarshall Dawson
Add the capability for specifying which version of depthcharge to checkout and build. This is similar to the existing feature for SeaBIOS. The depthcharge makefile already contains some structure for checking out master vs. stable however the calling Makefile.inc ingored this feature. Add the command-line variable assignment for these, along with a tree-ish for any revision. Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18270 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Use variable target nameMarshall Dawson
Depending on the commit to build, depthcharge may have a different target name (depthcharge vs. depthcharge_unified). Add some logic to determine which name should be used based on the commit ID being requested. Change-Id: I05b853934d13696f4bd0d79d53ff6c5f59096d1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18269 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-01payloads/depthcharge: Change make target from unifiedMarshall Dawson
Drop the _unified moniker from the depthcharge build. The payload and coreboot have drifted out of sync and there is no longer a non-unified depthcharge. This patch corresponds with the depthcharge change: https://review.coreboot.org/cgit/depthcharge.git/commit/?id=74a0739 Change-Id: I8d028b14d2eee63dfdc9d3dd63695f1c58ea7984 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18268 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-27SeaBIOS Kconfig: Update loggingMartin Roth
The SeaBIOS and coreboot log levels don't really align, so setting the SeaBIOS log level to the same as coreboot's isn't really what we want. - Update default log level to use the default SeaBIOS log level. - Update the current help text to match the new defaults. - Add help text for what is displayed at various levels. - Get rid of separate type & prompt lines. - Add comments for default seabios level & logging disabled Change-Id: I5a8b75bd44748cb94a83a77ac3a379c8a9587e7b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18210 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
2017-01-17SeaBIOS: Add Kconfig option to set verbosity levelStefan Tauner
Previously SeaBIOS's default was used (1). This patch defaults to coreboot's console level instead which is approximately the same verbosity as SeaBIOS and thus what a user would probably expect. Change-Id: If79e5f40c9380bb527f870eeb7d0cb43faf00beb Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/18051 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-10payloads/GRUB2: Add Kconfig options for grub.cfgDenis 'GNUtoo' Carikli
Change-Id: I5480d6a5f2a6bbae4222e05bbe92eb717e1aff65 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/5109 Tested-by: build bot (Jenkins)
2017-01-06payloads/external/SeaBIOS: Bump version to 1.10.1Philipp Deppenwiese
Changes since SeaBIOS 1.9.3 Release 1.10.0: * Initial support for Trusted Platform Module (TPM) version 2.0 * Several USB XHCI timing fixes on real hardware * Support for "LSI MPT Fusion" scsi controllers on QEMU * Support for virtio devices mapped above 4GB * Several bug fixes and code cleanups Release 1.10.1: * Updates for QEMU for reproducible builds Change-Id: I465700307d72fa44b6900b38b332603ea505ed09 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-29payloads/external: Download FILO over HTTPSJonathan Neuschäfer
Change-Id: I1b44e32505b96978849d39764ff399a502fa6e84 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17972 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-29payloads/external: Download iPXE over HTTPSJonathan Neuschäfer
Change-Id: Ie4979ab8491ee821b39a273c5f354c445105d2a4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17971 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27Do not select SEABIOS_VGA_COREBOOT by default when building for QEMUArthur Heymans
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not work and GRUB works but is forced in txtmode, instead of graphical mode. Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17122 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27FILO: update STABLEKevin Paul Herbert
The STABLE build of FILO does not build anymore with the current HEAD of coreboot. However, the current HEAD of FILO does build with the current HEAD of coreboot. Update FILO STABLE to FILO HEAD. Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558 Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com> Reviewed-on: https://review.coreboot.org/15195 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-27payload choice: Fix build of FILOKyösti Mälkki
Actual build was missing libpayload path. Change-Id: I519869d2d64c66b3d1d557595c7d13c22cd40819 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17114 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25payloads/external/Makefile.inc: Clean up makefileMartin Roth
- Add comments dividing the payload sections. - Move separate TINT and Memtest sections that were intermingled. Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17046 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-19mb/asus/kcma-d8,kgpe-d16: use MAINBOARD_DO_NATIVE_VGA_INITArthur Heymans
MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG should only occur together with MAINBOARD_HAS_NATIVE_VGA_INIT. It seems to be used to just have to have the option to be able to select SEABIOS_VGA_COREBOOT. This patch makes these boards use MAINBOARD_DO_NATIVE_VGA_INIT and MAINBOARD_HAS_NATIVE_VGA_INIT to have it select SEABIOS_VGA_COREBOOT by default when SeaBIOS is chosen. Change-Id: If0a36af1883a3d62b16a61483733be981a85e5e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16981 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-19Select SEABIOS_VGA_COREBOOT when native graphic init is selectedArthur Heymans
Change-Id: I19db898a5e76bf9c151934c7979316fb3737e881 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16965 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-26payloads/external/Memtest86Plus: Update stable to latest commitMartin Roth
This brings in two additional changes: - Use OBJCOPY if available. - Fix strstr() indent and rewrite to not call strlen() on each char. Change-Id: Id13dfda28c545332fce8282e849f379bf50629b9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16605 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-14SeaBIOS: Update stable version to 1.9.3Martin Roth
The SeaBIOS Stable version 1.9.3 was released back in July. This has just 4 fixes over 1.9.1: fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL fw/pci: Add support for mapping Intel IGD via QEMU fw/pci: add Q35 S3 support build: fix .text section address alignment Change-Id: I527df85b5199942706d1188285c6678bf2f726a1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16254 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Omar Pakker Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-09-06iPXE: Update stable version to the last commit of July 2016Martin Roth
Change-Id: I804d5a9100fdfea48383aaf5dc0eb154eda78f4d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16255 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-08-08Use VBOOT_SOURCE instead of hardcoding vboot pathPaul Kocialkowski
This replaces all occurrences of a hardcoded vboot path to the VBOOT_SOURCE variable, that may be overridden from the command line, witch fallback to the source from 3rdparty. Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28Makefile: Include $(top) in DOTCONFIG definition to allow overridePaul Kocialkowski
Including $(top) in the DOTCONFIG definition allows getting rid of the $(top) prefix in payloads, which in turns allows providing a full path for DOTCONFIG via the command line. Change-Id: I7546a12cf4a2a146e32fef81121f45f83ba67ac8 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15826 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12payloads/iPXE: Fix PXE Kconfig questionMartin Roth
As reported by Andrew Engelbrecht on the coreboot mailing list, there was an issue when selecting the pxe rom file: When using "make menuconfig", if "add pxe rom" is selected, then the field below to set to the path of the pxe rom, the "add pxe rom" option gets disabled. This problem seems to be due to the use of the 'optional' Kconfig keyword, so this section of the Kconfig is rewitten here to remove that keyword and fix the issue. Change-Id: I51680cb746160cb853c8679ac64e2d37989cb574 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15555 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-06-28tint: Fix tint and add Kconfig optionAntonello Dettori
Fix the compiler errors with tint, improves the Makefile, adds Kconfig integration and secondary payload option. Change-Id: Ia99e30f566d5ccf0d083e52bf174970535daefc5 Signed-off-by: Antonello Dettori <dettori.an@gmail.com> Reviewed-on: https://review.coreboot.org/14989 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-21payloads/external/GRUB2: Pass CONFIG_GRUB2_EXTRA_MODULESBenjamin Barenblat
Set CONFIG_GRUB2_EXTRA_MODULES from the Kconfig when building GRUB2. This causes the specified modules to actually enter the built payload. Change-Id: I345026af705ba8af77c6c12aba8e1bd4135e519c Signed-off-by: Benjamin Barenblat <bbaren@google.com> Reviewed-on: https://review.coreboot.org/15203 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-06-20Update SeaBIOS URL to httpsRyan Salsamendi
Change-Id: If1c37bf2bb7df35d5e5ec37cefb9bb92a251f93b Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com> Reviewed-on: https://review.coreboot.org/15206 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Antonello Dettori <dev@dettori.io> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-08SeaBIOS: Add option to include a bootorder file in cbfsMartin Roth
Including the SeaBIOS bootorder file seems to be a fairly common desire, so let's make it easy. Change-Id: Ib0874dee46215287b09c0b52648072ef3ff06ec5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15076 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-05-04payload: Fix broken Linux kernel as payloadWerner Zeh
Commit 785a31d67e8f34065a2483080e4fd7032c3a8aad (Makefile.inc: Move payload code to payloads/) breaks the usage of Linux kernel as payload. The reason for it is that cbfs-files-y is evaluated before payloads/external/Makefile.inc is sourced and as a consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for payload options. That leads to missing command line and initrd for the kernel which in turn leads to kernel panic when it boots. To avoid it, move the code which adds payload to cbfs completely to payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is set right before the payload itself is added to cbfs-files-y. I have tested this patch with a Linux kernel as well as with SeaBIOS as payload on mc_tcu3 and it works. If someone sees impact to other payloads just let me know. Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-27payloads: Add a stable version of Memtest86+ for reproducibilityMartin Roth
Memtest86+ was pulling origin/master which will change over time. This adds a commit-id as a stable version to allow it to be reproducible. The other secondary payloads, coreinfo and nvramcui, do not need this because they are part of the coreboot repo and not fetched from an external source. Change-Id: I20c516010f76cf03342bd8883d0ee7ac5f8bc7e4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14520 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-27Memtest86Plus/Makefile: Update to common payload makefile formatMartin Roth
This series of patches attempts to update all of the external payload makefiles to be as similar as possible. - Add .git to the git repo URL to show that it's a git repo. - Use the common checkout, fetch, and clone ($(project dir)) targets - Add TAG-y and NAME-y variables - just with origin/master for now. Stable will be added shortly. - Make sure all phony targets are in .PHONY Change-Id: If83c100841d5f91a9fab7ac44ba20ec2271c0594 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14152 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-15Makefile.inc: Move payload code to payloads/Stefan Reinauer
Change-Id: I91d9537e8c78560c944c552255e703fc0e6f1f78 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14349 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-13payloads: add iPXE 'payload' buildMartin Roth
We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-21payloads: Add a target to print payload git urls and directoriesMartin Roth
Being able to fetch this list will allow the jenkins builder to securely fetch the external payloads so we can start testing payload builds. Change-Id: I777229216b2f11f0f427cd5f8cfa003da4171a77 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14132 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21payloads/external: Rename Makefile.inc to MakefileMartin Roth
These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-15payloads: Enable building depthcharge as part of the coreboot buildStefan Reinauer
For CHROMEOS builds, depthcharge can be built automatically. This dependency exists because depthcharge without vboot and subsequent signing of the image doesn't work very well, and both are keyed to that flag as well. Change-Id: Id0195bd3b4e454f382782106d6512469106daac5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/10924 Tested-by: build bot (Jenkins)
2016-03-12payloads/seabios: Add "git revision" to the SeaBIOS version menuAntonello Dettori
Add an option to specify a git revision from which to build SeaBIOS. Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13937 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins)
2016-03-11codebase: Change makefile $(shell pwd) commands to $(CURDIR)Martin Roth
- Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11payloads/external/Makefile.inc: Don't rebuild SeaBIOS every timeMartin Roth
Currently, if SeaBIOS is set as the payload, it gets rebuilt every single time we do a build. Change it to re-build just when there’s a config change. Change-Id: Ib141f2cbf8796d449172432bb30fa4806cf90328 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-11SeaBIOS: Update SeaBIOS from repo when using master branchMartin Roth
Previously the SeaBIOS directory would never get updated after the initial clone because the tag would always match. This can be shown by noticing that the text 'Fetching new commits from the SeaBIOS git repo' is never seen. This change will always try to pull the latest code if 'Master' is selected. Change-Id: I460e2fb0c6f683a0f85343d164880c2d9e6d95cc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13947 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11payloads/seabios: Update version number in KconfigPaul Menzel
Fix up commit 4f66648c (payloads/seabios: Upgrade stable from 1.9.0 to 1.9.1), forgetting to update the version number displayed in the Kconfig menu, by updating the string to 1.9.1. Change-Id: Idb395d0ea65bcf91c7c9645fd76d428936e91587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14010 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-03-09payloads/seabios: Upgrade stable from 1.9.0 to 1.9.1Paul Menzel
SeaBIOS 1.9.1 was released on February 15th, 2016 [1][2] with the changes below. ``` $ git log --oneline --reverse rel-1.9.0..rel-1.9.1 3403ac4 build: fix typo in buildversion.py fe4154e xhci: Check for device disconnects during USB2 reset polling c016236 xhci: Wait for port enable even for USB3 devices 0240428 sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec fe8d986 sdcard: fix typo causing 32bit write to 16bit block_size field e902d3f nmi: Don't try to switch onto extra stack in NMI handler dc6498e scsi: Do not call printf() from scsi_is_ready() 6027043 coreboot: Check for unaligned cbfs header 73f00bc fw/pci: do not automatically allocate IO region for PCIe bridges b3ef39f biostables: Support SMBIOS 2.6+ UUID format ``` [1] http://www.seabios.org/Releases#SeaBIOS_1.9.1 [2] http://seabios.org/pipermail/seabios/2016-February/010493.html Change-Id: I4bc8224c2a80cbcce54621e941a9c3a92ca04215 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13933 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-03-05BuildSystem: Add Memtest86+ as a secondary payloadMartin Roth
This allows memtest86+ to be added to CBFS as a 'secondary' payload on x86 systems, to be loaded by the main payload if desired. Selecting this option, which defaults to no, builds the memtest86+ payload and adds it to CBFS as `img/memtest` which can then be loaded by for example SeaBIOS or GRUB. Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13858 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-02-24u-boot: Make sure targets aren't duplicatedMartin Roth
When U-Boot isn't selected as a payload, two of the targets: $(project_dir): and $(project_dir)/$(TAG-y) evaluated to the same value, generating a make warning when running a clean. By adding additional text to the file that is created, this is avoided. Gets rid of these warnings: Makefile.inc:54: warning: overriding commands for target `u-boot' Makefile.inc:37: warning: ignoring old commands for target `u-boot' Change-Id: I4b4df753612b674b3ccde2a757338840be92d1f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13767 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18Payloads: Add U-Boot as a coreboot-payloadMartin Roth
- Add Kconfig and Makefile options to use U-Boot as a payload. - Add Kconfig option for extra cbfstool command line arguments. - Add Kconfig & Makefile option to load the payload as a flat binary. - Add u-boot directory to .gitignore. This is currently working for X-86 only. Graphics worked in U-Boot correctly by initializing the VBIOS and setting up a console mode. Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not booted an OS yet. Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/12714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-17payloads/external/GRUB2: Add a possibility to add custom modules.Vladimir Serbinenko
Change-Id: I3004eac248561b0cd4e44bcef90fc66fae5d77ca Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13727 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-02-09SeaBIOS: Disable serial console if serial is memory mappedMartin Roth
SeaBIOS only supports standard IO based serial ports. If the serial port being used by coreboot isn't a standard IO serial port, disable the serial console in the SeaBIOS build. Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13617 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18payloads: fix dependencies for seabios and filoPatrick Georgi
config and revision data need to be around before they're added to CBFS. Change-Id: I195156773effd5137c3fda3639c002fbec6e7158 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12971 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-20Makefile.inc: Move addition of payload rev & config to payload makefileMartin Roth
These files need to be added to cbfs-files after PAYLOAD_CONFIG and PAYLOAD_VERSION have been defined. Where they were before, they didn't get added to the final build. Change-Id: Ib1b230f9eb72a8c1710ef473a9f24c0fb7ec6e17 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12751 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06SeaBIOS: remove VERSION variable in coreboot MakefileAlexander Couzens
SeaBIOS dropped support of VERSION variable and is reproducible without it. Change-Id: Iea1dc20e18aa5c274060e3cd55cd9e95086a602d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/12645 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
2015-12-05build system: add dependencies for GRUB2 and FILOPatrick Georgi
Make sure the build system knows how to start building the various integrated payloads we support. Change-Id: I2128d09c78795e0a41b055975e9f7052e3d951ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/12641 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-05build system: Drop useless variable and dependencyPatrick Georgi
We don't need COREBOOT_ROM_DEPENDENCIES anymore because the dependencies are taken care of by the cbfs-files mechanism. REFCODE_BLOB also doesn't need to be an explicit dependency. Change-Id: I3f32cce79683e57a174724179bc2ac59a8cdda94 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12648 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-12-04external/Makefile.inc: Update SeaBIOS version fileMartin Roth
SeaBIOS updated how versioning is done, and out/version.c no longer exists. The new file with version information is autoversion.h. Change-Id: I10abee73ecc51e52c9ff7a2e7a9099339b1a4b40 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12567 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-04SeaBIOS: update stable release from 1.8.2 to 1.9.0Alexander Couzens
* The default boot menu key is now the ESC key (instead of F12) * Initial support for Trusted Platform Module (TPM) hardware and BIOS calls * Initial support for chain loading SeaBIOS from Grub (via multiboot support) * Initial support for booting from SD cards on real hardware * virtio 1.0 device support * The build will no longer include the build hostname or build time on "clean" builds. This makes the build binaries more "reproducible". * Basic support for running SeaBIOS on Baytrail Chromebooks * SeaVGABIOS improvements: * Improved support for old versions of x86emu (the "leal" instruction is now emulated) * Several bug fixes and code cleanups Change-Id: Ifbd50f1884959fed4c4f666b87f2ef7b4769c6d3 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/12566 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY optionMartin Roth
This has been replaced by the PAYLOAD_CONFIGFILE option, allowing any SeaBIOS config option to be set by a platform. Change-Id: I584c4c481266740840158baba76581d68e69b448 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12570 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-12-03payloads/external/SeaBIOS: Add option for saved SeaBIOS .configMartin Roth
Instead of adding various SeaBIOS options into the coreboot Kconfig, just add a way to use saved SeaBIOS .config files. These files can contain full SeaBIOS .configs, but is really intended for individual options. The coreboot Kconfig options take precedence over the settings in the saved .config. Change-Id: Ia7f9c76555b8e290777207b3f637c94c4d67a782 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12568 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-11-30build system: add dependencies for SeaBIOS outputPatrick Georgi
Change-Id: I7b9f1574f6d487c0a6e5c9095c25ee973a96fa89 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12577 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-05SeaBIOS: update stable release from 1.7.5 to 1.8.2Alexander Couzens
Several USB timing fixes for USB controllers on real hardware Initial support for USB3 hubs Initial support for SD cards (on QEMU only) Initial support for transitioning to 32bit mode using SMIs (on QEMU TCG only) SeaVGABIOS improvements: Added cursor emulation to coreboot native init vgabios (cbvga) Added support for read character calls when in graphics mode Change-Id: Ic99f11dea4c87dbf3e9de4ce7f14064d0a083101 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/11479 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-30Kconfig: Remove EXPERT modeAlexandru Gagniuc
After much consideration, and many years of an EXPERT mode sitting almost completely unused, we've seen that it doesn't work for us. There is no standard on what constitutes EXPERT, and most of coreboot's options Kconfig are expert-level. We even joked that not selecting "EXPERT" should prevent coreboot from compiling: @echo $(shell whoami) is not permitted to compile coreboot Change-Id: Ic22dd54a48190b81d711625efb6b9f3078f41778 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11365 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-08-19Store the payload config and revision in CBFSMartin Roth
Store the payload config and version files in CBFS if using a SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled. Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-15seabios integration: deal with ccache woes some morePatrick Georgi
seabios integration interprets the CC variable with a special case when ccache is prepended to the compiler. Since the integration also tries to extract compiler flags (which I'm not sure we still add to CC _ever_), that also needs to look at only the part of the string that contains compiler and (maybe) flags, so skip the first word if it was determined to be the path to the ccache binary. Change-Id: I717863f456bf4fd6f08427d86633079ecda039df Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10seabios integration: fix interaction with ccachePatrick Georgi
SeaBIOS' build system doesn't like CC to be a compound command like "ccache gcc", so we strip things. Unfortunately with CCACHE enabled, we passed /usr/bin/ccache (or wherever it was found on the PATH). Instead use the second term in CCACHE mode. Change-Id: I905fcdc73d067e553e923e307fafceaacdefdc6c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11138 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09payloads: Move payloads logic to payloads directoryStefan Reinauer
Change-Id: I6437e30da6ab675d32dc81c5d6d3fd9bcdc67f06 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10923 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07payloads: Reorganize Makefile.incs for external payloadsStefan Reinauer
This is not going as far as I would like it to go, but some of the external payloads have to be fixed up first. Long term, I would like to directly add payloads/external/* to subdirs-y and remove one layer of indirection from the build process. For now, moving the payload Makefile targets into payloads/ is already a small improvement. Change-Id: Ie4eb492eb804e0aaaf1a4d90af2f876f27a32a75 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10829 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07payloads: Reorganize Kconfig for external payloadsStefan Reinauer
The integration of external payloads in coreboot is a bit messy. You have to change the to level Kconfig file for every payload (something that we recently fixed for mainboards and chipsets). This means that updating e.g. the SeaBIOS version requires a change outside of the SeaBIOS directory. With this patch you can create a new directory under payloads/external and place a Kconfig and Kconfig.name file in there, and the payload will automatically show up when you do "make menuconfig". Change-Id: I293abcb8eae581d4b3934e64897c0d339a27e7c1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10828 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-03SeaBIOS: Change clean to just 'rm -rf seabios/out'Martin Roth
When running 'make clean' if the seabios directory is present, we get warnings about not having IASL installed or that the C compiler can't be executed. It fails to actually run the clean because we're not correctly passing in the toolchain. Just do what the SeaBIOS clean does directly and delete the 'out' directory without actually calling the SeaBIOS clean. Here were the previous warnings: % make clean Unable to execute the C compiler (). Please install a working compiler and retry. Makefile:104: *** "Please upgrade the build environment". Stop. or % make clean The SeaBIOS project requires the 'iasl' package be installed. Many Linux distributions have this package. Try: sudo yum install iasl Or: sudo apt-get install iasl Please install iasl and retry. Makefile:106: *** "Please upgrade the build environment". Stop. Change-Id: Ice41376bc242f1f622d849e7628f8a9b6ef47404 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10655 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23SeaBIOS: fix reproducible build by defining our own version stringAlexander Couzens
SeaBIOS uses a version string which is derived from hostname. Defining our own version strings drops this dependency. This only works in versions newer than rel-1.8.0-36-g624e812. Change-Id: Ie800deffd3706d1b2dabf5258e2e48bfcd2929b7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/10515 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-02SeaBIOS Makefile.inc: Remove build dir for uppermem optionMartin Roth
The build directory got removed while my patch was in flight and I didn't notice when I submitted it. The uppermemory change was added in commit 4d7d25f38a - http://review.coreboot.org/#/c/6364 The output directory was changed for everything else in commit ab11a6a94c - http://review.coreboot.org/#/c/6460 Change-Id: Ib8311f694280d305e826adbb76e3e7b722b30e0f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7298 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-04Kconfig: Allow native vga init to be selectable for SeaBIOS payloadEdward O'Callaghan
Change-Id: I1508f3d3c56cb9afbf4a23355831549552a62866 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6891 Tested-by: build bot (Jenkins) Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-09-14payloads/external/SeaBIOS: Bump version to 1.7.5Edward O'Callaghan
Change-Id: Ie4b58b739ea411035b1801348e3e73e607299846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6900 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>