| Age | Commit message (Collapse) | Author |
|---|
|
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Show the build options that are passed to edk2 in one clear block.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I917a8c1d3ac8f2a223e584fec10689679835630c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I12a18acd24a0aede8113e1daa607c852eba67049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
versions
Most of the Kconfig options are upstream, so they should exist in
most forks. Therefore, allow them to be set and passed when using
a custom repository or upstream edk2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I31e6e267ee6e4e3a254f733e1dfc1ecb3a3d3576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
If no directory is found then no harm is done either.
Change-Id: I0842ec106f11eca80bf01fd4771e1dfc4588b3fa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
`make clean` never thoroughly removed LinuxBoot build artifacts. This
change checks for kernel directories present in the project directory
and deletes all of them, if found.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ia056ac6608e3631dfc270ba5c2f32216c3e1ac50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65098
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In addition to change CB:40316 this commit proposes a change of default
behavior inside of the LinuxBoot toolchain.
Currently the defaults build a LinuxBoot payload which boots into the
u-root shell and waits for input. In fact it does not deliver any
bootloader with it, but the build image is on the other hand rather
small.
This commit changes the defaults in a way that the LinuxBoot
bootloader will actually be able to boot a local or remote system image.
In consequence the build payload size is rather big, but accepted for a
working out-of-the-box startup behavior.
See discussion on that topic in the above mentioned change.
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Change-Id: Ieaba7e523aef10c467a8bea29ae323e22324b225
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40527
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The u-root toolkit dropped the original uinit bootloader in the master
branch and respectively the systemboot-option in templates.go. In
consequence the LinuxBoot builds will boot into the u-root shell and
waiting for input. This commit enables the reuse of the -uinitcmd flag
to specify a command, which runs after the u-root init-process.
Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device
selection. Other preselections, i.e. stboot and boot2 are implemented as
well. Custom strings or programs can be set as well, but they cannot
contain program flags. E.g. 'fbnetboot -class linuxboot' will not work,
because they aren't symlinkable.
This commit and its respective LinuxBoot builds with systemboot, none
and one custom option have been tested successfully on a UP squared
single board computer with the intended behavior.
Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is a breaking change for now when using latest u-root main, which
is the default behavior in LinuxBoot.
u-root switched to golang modules and therefore `go get` is not the
standard behavior anymore. The workaround for this is to pull the
repository and build directly in the directory for now. Another apporach
would be to use `go install $pkg@latest` to install the binary at that
particular version into the golang binary path.
Currently missing is a control structure to enable the build process for
legacy versions <v0.8.0.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ifa03504da6fa321ffc6d2506b27ebd2e3ed9961b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65090
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Currently, custom TianoCore builds are allowed, but those may need
different parameters. Add a Kconfig option to specify additional
parameters to be appended to build command.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I025459ae94592103b4be0c68b422100b7c649d34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The sentence about "to bypass the secure mechanism implemented in
the GRUB runtime config" sounded confusing, so reword it.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I9c6f40d6d11d459fe4be40a624921c2632a89564
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
coreDOOM is a port of DOOM to libpayload, based on the doomgeneric
source port. It renders the game to the coreboot linear framebuffer,
and loads WAD files from CBFS.
Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the
libgfxinit provided linear framebuffer.
Project page: https://github.com/nic3-14159/coreDOOM
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
After commit ae48b42683 (payloads/tianocore: Init submodules),
Tianocore's Makefile no longer detects an unclean working directory and
thus always performs a `git checkout`, overwriting any uncommited
changes made in the cloned sources.
The change of "clean" to "dirty" effectively inverts the logic of the
if-else condition, which would normally swap the two possible code paths
of the branch. However, since `git status` outputs multiple lines, most
of which do not contain "clean", the -v option (select non-matching
lines) causes grep to always match at least 1 line and thus return
success. This causes the if-else branch containing the `git checkout`
to always be taken regardless of the state of the working tree, masking
the issue of the inverted logic. Removing the -v option addresses both
of these issues and restores the intended behavior of the if-else block.
TEST:
1) Build coreboot successfully with the Tianocore UefiPayloadPkg option.
2) Make a change in the cloned Tianocore sources that results in an
unclean working directory and check for the "Working directory not
clean" message when building coreboot.
Change-Id: Icd4952b40c147d0fba676089ced5a8b59b93ad50
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a
useful configuration, since SeaBIOS has improved its hardware
compatibility. For example, some USB drive can work under SeaBIOS but
do not work under native GRUB2, and GRUB2 can use BIOS call (provided
by SeaBIOS) as a fallback method to access hardware if it is present.
But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS
can be built as secondary payloads, and "SeaGRUB" is now implemented
as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files".
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Fix standslone build failure after depthcharge patch
https://crrev.com/c/3461454 merge.
BUG=chrome-os-partner:226438207
TEST=Compiled brya and redrix in standalone mode.
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: Ib2bb2ce42a314e05ef22ea7b8abc067d6361d511
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
It looks like the u-root 'master' branch was renamed to 'main'.
Change-Id: I384ba66289a49bf226b505615bd16bdf85612c1a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62590
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EDK_TOOLS_PATH is set on lines 85 and 137. Remove the instance
on 85. edk2 still builds correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0c837f14693941afec194b140c93d786ea784e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update iPXE stable from commit id ebf2eaf515:
Mar 18 10:24:08 2019 +0000
[intel] Add PCI ID for I219-V and -LM 6 to 9
to commit id 6ba671acd9:
Jan 17 16:17:17 2022 +0000
[efi] Attempt to fetch autoexec script via TFTP
This brings in 424 new commits and fixes the build with coreboot-sdk
2021-09-23_b0d87f753c.
TEST=Build PC Engines apu2 board and boot it over network with the
iPXE
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ide12a3a3082f9ea027e180518a80e6c0772b1232
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add missing CONFIG_ to the Boot Timeout parameter.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I88f4aa0286a77f6c94b5e5ec97a0034ea7594b4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62920
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SeaBIOS 1.16.0 was released on March 2nd. Thus, update the stable
version from 1.14.0 to 1.16.0.
Change-Id: I475a9be47171bfbe3b3c2d4d1d14bb753d8575a8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add prompt to Boot Timeout so that it can be easily configured
from a config file.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I62b8f0a9b5bc0796506b991199a457d6b34ae494
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Convert BMP to the correct format at build time, which removes the
requirement for any runtime checks.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f1e9c8df2ca7d66f362f9fa5688d6cb443c2581
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
By default, edk2 allows 1000000μs for SD Card Readers and eMMC to
initialize which is excessive and causes a boot delay. This makes
the value configurable and uses a default of 1000μs which is sufficient
for the majority of readers. The value of 1000μs was hardcoded in
MrChromeBox's fork for around 2 years with no reported issues.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I873bcddf6f37a9eaae5c84991b3996d51fb460d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add TIANOCORE_PRIORITIZE_INTERNAL which, when enabled, will build edk2
with boot from internal devices before external devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib1f73c8f3f2f2376cdc197b58d259446dc5f0138
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_PS2_SUPPORT which, when enabled, will build edk2
with PS/2 keyboard support.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibabce6ac1ac68ab958610d42c77f3c2c494528ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_HAVE_EFI_SHELL, which when enabled, will build edk2
with the EFI Shell binary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1272f514e3f5becfe1fddd58ca0d820c5d1c1b54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adds TIANOCORE_FOLLOW_BGRT_SPEC which, when enabled, will follow
the BGRT Specification implemented by Microsoft and the Boot Logo
will be vertically centered 38.2% from the top of the display.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If508166fe657d1cc032dd09a0fa231c7b60d9846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_BOOT_MANAGER_ESCAPE which, when enabled, will use
Escape as the hot-key to access the Boot Manager. This replaces
the default key of F2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1e60d116367542f55f0ffa241a6132e4faabe446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This reverts commit 2a8de6dafb7eec8ff9112b43888507fbc0d8f851.
SeaBIOS 1.15.0 regresses on systems with NVMe devices [1]:
> Greetings! Was this patch set tested on bare metal hardware? I'm
> seeing "GRUB loading: Read Error" when attempting to boot from NVMe on
> various Purism Librem devices (Intel Skylake thru Cometlake hardware).
> Reverting this series resolves the issue.
So, revert back to SeaBIOS 1.14.0.
[1]: https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/message/SRECAGH4NE3XPDWJ2YI526L5LPSJWENJ/
Change-Id: If2ec738d478f11b203f499eaa28197357de6630d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61179
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Fix the inconsistence of the target path of U-Boot payload
between Kconfig and Makefile.inc.
2. Perform full clone (to the destined commit) in order to get
tags.
3. Move stable commit id of U-Boot payload from Makefile to
Kconfig, and make prompt consistent with it.
Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
SeaBIOS 1.15.0 was released on December 2nd. This updates the stable
version from 1.14.0 to 1.15.0
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibc526fbddf8a13e7b00e963f9c2e73a9863c9daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Move to building the latest U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I33fcfc3135e55d16b0dcd8135217bd5adcef2099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
U-Boot normally runs with a display if available. Enable this option so
that the display shows if U-Boot supports it.
Use 'select' rather than 'imply' since the CI complains.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ie5684c6ead30076689f43034675ff9f3531970fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
At present U-Boot crashes on entry as the start address is wrong. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I65e32fbb4ffea04b99abe4dc5afccfacd06c986e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We don't need all the git history. Speed up the build by doing a shallow
clone.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: If31c9dd158aa23f242e4fd145449ef7502fb1ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The u-boot.bin file should be used, rather than u-boot-dtb.bin
While they are often the same, the -dtb version is really just for
legacy use now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This doesn't work at present, merely printing an error when U-Boot is
selected as a payload. This is because it adds a file into the U-Boot
tree which makes U-Boot's build system think that the tree is unclean.
Update the rules to put the tag file outside the source tree. Use an
out-of-tree build for U-Boot to avoid changing the source tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I24d6545b54f97afeefaca3ffed79eec2e7afacb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some older devices, like the x230 Thinkpad, do not boot with the
newer Tianocore UefiPayloadPkg build target, and cannot easily be
debugged without serial UART output. As a stopgap solution, re-add
the older (now deprecated/removed) CorebootPayloadPkg build target.
This partially reverts commit d3b49b4c,
"payloads/Tianocore: Update default build target, simplify build options"
Change-Id: I81490c277626fc69d95920868d80cb24c0763de4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add more detail as to why a smaller-than-screen-size image is to be
preferred, in contrast to other payloads' bootsplash images.
Signed-off-by: Felix Friedlander <felix@ffetc.net>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: Ib4c6666bb0e49369fe8fe2ae3dc12c023f668da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some ARM64 platforms (e.g., MT8195) are now able to compile
and run EDK2 (UefiPayload). As a result, we should allow selecting
PAYLOAD_TIANOCORE for ARM64 platforms.
TEST=show strings correctly.
1. make menuconfig
2. select Mainboard -> Vendor=Google, model=Cherry
3. select Payload -> Add a payload -> Tianocorepayload
4. make -j
5. build/cbfstool build/coreboot.rom extract
--name fallback/payload --file out.elf -m arm64
6. file out.elf # ELF 64-bit LSB executable, ARM aarch64
7. strings out.elf | grep tianocore # lots of tianocore stuff
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I10777a341d46240b91ceeeb1be26c33a0c5db839
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58054
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig option TIANOCORE_ABOVE_4G_DECODE to pass build option to
edk2 to enable or disable "Above 4G Decode". Disabling allows certain Linux
distributions to boot such as Qubes, Zorin and Proxmox.
Requires commit `2f6d4cbcc7fa49462e607baed7626524ccd59ad3` that is
present in the `uefipayload_202107` branch of MrChromebox's edk2
repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3b1d15196c0ec611431af29031682fea626d19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update tianocore branch used with default UEFIPAYLOAD option to
mrchromebox/uefipayload_202107 (July 2021) branch. This branch is
rebased on edk2 upstream commit 12e34cd2f7900578ee83cb01b8f1696a7bb7511b
[OvmfPkg/Bhyve: clean up TPM_ENABLE remnants] vs tag edk2-stable202105.
The main changes are fixes for e820 table parsing and support to disable
"Above 4G decode", which is required to boot distros with bootloaders
that expect to be loaded into RAM below 4G. This fixes booting with
Qubes, ZorinOS, Proxmox, among others.
Additionally, several commits on top of upstream have been consolidated,
reworked, and/or reordered for readability and maintainability.
Change-Id: I6f04fd027a0599ca6892a1376938108a2e402ac2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
FILO allows to configure a line to autoboot. Hook this up into
coreboot’s build system.
TEST=Configure coreboot for QEMU i440fx with FILO as payload and
configure:
CONFIG_FILO_MASTER=y
CONFIG_FILO_USE_AUTOBOOT=y
CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img"
CONFIG_FILO_AUTOBOOT_DELAY=5
Boot Debian image with:
qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22
Change-Id: Id167e9a144bf466da87469108002672b299b702a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
commit d3b49b4
[payloads/Tianocore: Update default build target, simplify build options]
simplified the build string and removed the bootloader Makefile variable,
but one reference was missed. Luckily the variable being empty didn't
break things, but correct it regardless.
Change-Id: If37b291dda59c20bfe4c6e5b9100fac52d11a2f4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55239
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The custom bootsplash option only functions when using the UEFIPAYLOAD
payload option, so restrict visibility to when that option is selected.
Change-Id: If5fe46b629e5275da54a5e86465a68271110397b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Logging to coreboot cbmem, instead of a serial console, was
added to MrChromebox's uefipayloadpkg branch. Add a Kconfig
option to enable this, and restrict it to the UEFIPAYLOAD
payload option, since this feature does not exist in upstream
edk2.
Change-Id: Idef125235dc7ba885eb22ac69c6f752588a9e295
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Since upstream edk2 totally drop 32-bit support for UefiPayload, totaly drop it.
Test: Build and run qemu successful boot up into EFI shell with UEFIPAYLOAD option.
Change-Id: Iadd9a3c455fad4eede8a0a017415acd2c57fba04
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54189
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop the deprecated COREBOOTPAYLOAD option, and replace it with MrChromebox's
updated UefiPayloadPkg option. Simplify the Kconfig options to make it easier
to build from upstream edk2 master. Drop the TIANOCORE_USE_8254_TIMER Kconfig
option since it applied only to CorebootPayloadPkg. Clean up the Makefile now
that we're only building from a single Tianocore package/target.
Test: build/boot qemu Q35 target with both UefiPayload and Upstream options.
Change-Id: If545fbd0c30be6dcc6ff43107b80980fa23a527e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54019
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use static_fw_config.h during depthcharge build to be in line with latest
depthcharge changes on the main branch.
https://chromium-review.googlesource.com/c/chromiumos/platform/depthcharge/+/2523517
BUG=none
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I72a681d9321750c392000e11a21d81020dde3fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
|
|
Three stages of the new tint build system:
1) generate_core.sh extracts the core part from buildgcc script,
most importantly the checksum calculation/verification functions.
2) tintify_core.sh adds the tint-specific footer/header to the core,
such as the properties of current version including its checksum.
3) tint.sh - generated and "tintified" core script - builds a tint.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ib71f5b861ecf91949a5af12812258e60873f0498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Change-Id: Ice0b908b23921cd9afbef52d2471f5ded277a136
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Upstream edk2 dropped separate 32-bit support for UefiPayloadPkg, and
removed the architecture suffix from the package dsc filename.
Test: build/run qemu with CONFIG_TIANOCORE_UEFIPAYLOAD selected.
Change-Id: I40077f1d370f0cb5627645b305b57e6c71e44095
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reproducible builds have to be independent from user, host,
domain, time.
Taken from OpenWrt (GPL2).
Change-Id: I420588acc66647051c08e4da6fbedc205cd62877
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35393
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without the boot template, u-root doesn't include any boot commands.
Booting other OS is impossible.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I7d0742d115715eb40e293e2a8711d1ff20d8970a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51331
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rebase the libpayload_tint.patch to update its internal version
numbers from 0.04+nmu1 to 0.05.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I91f780f80026147c3c35330625a4106c65a1ddf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50468
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Old archive is not available anymore. The tint sources inside the new
archive are the same (something changed in a debian subdirectory but
we aren't using it), so a libpayload_tint.patch is still valid.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: If556fac7d1d8379a022f59ed6aee1450b7bc5aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48616
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FILO's Makefile will check for libpayload and might not even `clean`
if it's not found.
Change-Id: If5f8f4ecce317e54cd4b5688553cc38220f6e6df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3dafffa61f4fe6089fd11ef6579626aff8088df5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They all operate on that file, so just add it globally.
Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying
the file in some way. When running them in parallel, coreboot.pre can be
read from and written to in parallel which can corrupt the result.
Add a function to create those rules that also adds existing
INTERMEDIATE targets to enforce an order (as established by evaluation
order of Makefile.inc files).
While at it, also add the addition to the PHONY target so we don't
forget it.
BUG=chromium:1154313, b:174585424
TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2
timeout and sercon) and saw that they were executed.
Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I125e40204f3a9602ee5810d341ef40f9f50d045b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48897
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Extract the architecture (-a) and package (-p) options into a
new variable (ARCH) to simplify the construction of BUILD_STR.
Test: build/boot various boards w/Tianocore payload
Change-Id: I490d48428ac56d613d0b704700dfcf4ebfb2d245
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48942
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a Kconfig option to set the tianocore boot timeout,
which is passed to the payload via a command line parameter.
Allows boards without an internal display (eg) to set a longer
boot timeout, in order to ensure the boot splash/menu prompt
are visible upon boot.
The associated changes on the tianocore side have already been
merged into MrChromebox's CorebootPayloadPkg and UefiPayloadPkg
branches (coreboot_fb and uefipayloadpkg respectively).
Change-Id: Ifeaadff05f6667d642c05b81f53c1d2dbc450af6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove copyright notices and other unnecessary churn.
Change-Id: Ie69cc121d2b6eed95aa3cbaa7215d61880148858
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47815
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 14ca7407196 (Makefile.inc: Move adding SeaBIOS cbfs config files)
introduced various regressions that were not spotted during review.
TEST=Building with SEABIOS_THREAD_OPTIONROMS is working properly again.
Change-Id: I4de0b11747e3df8dd31a85160add129d8cc6bd8a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47814
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using the INTERMEDIATE target this can be done in the proper dir.
Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There's no need for the global list of files to ignore, so use git's
ability to work with more local configuration.
Change-Id: I50882e6756cbc0fdfd899353cc23962544690fb3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46879
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also rename the prompt to "tested" to make it more obvious that there
is no really stable version.
Change-Id: Ib719fe5c30783a53ddad2a2dc2d9ecda37a05ac2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
BOOTBOOT is a multi-platform, architecture agnostic boot protocol.
The protocol describes how to boot an ELF64 or PE32+ executable inside
an initial ram disk image into clean 64 bit mode. This version uses
libpayload to do that. Depending on the lib's configuration, initrd
can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT
partition or a file on a FAT formatted ESP partition.
For more information see https://gitlab.com/bztsrc/bootboot
Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0
Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: If8aa28a22625b7b2cf9b58958de87ee752f637f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
see https://seabios.org/Releases
Change-Id: I20e57314b867581f41921178ff1ffcbaa50a0843
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: Ie08e92778e029b962cf0ed5f95ab740458e82fc5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Resolve missing dependency to fix concurrent building.
Resolves: https://ticket.coreboot.org/issues/271
Change-Id: Idbd9155e01fcc4571a61f1bba5b2b4a446036da0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I17ae7450a9641268fe392bed0f24846abc8e6f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43203
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upstream does not require it. From the repository readme:
"Note: When cloning submodule repos, '--recursive' option is not recommended.
EDK II itself will not use any code/feature from submodules in above submodules.
So using '--recursive' adds a dependency on being able to reach servers we do not
actually want any code from, as well as needlessly downloading code we will not use."
Change-Id: I0c5d6dd6e5070720870fc22b2476c6fe8dc7fd40
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: Id305d9edecac9e9cd305301e9dc5af6678ef7528
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Used commands:
perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
Change-Id: I9f74ed19257bc4234465b8f912deff1b485173f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41179
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The hardware IRQ option was not passed to SeaBIOS Makefile and resulted
in HARDWARE_IRQ being permanently disabled regardless of Kconfig
selection in coreboot. On platforms that need the hardware IRQ it caused
hangs at boot menu or iPXE prompts.
TEST=enter SeaBIOS boot menu on Libretrend LT1000
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iafcfd743177bbcd1ee23e227c74dd8268c4c23c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This fixes the missing closing brace introduced in CB:40953.
Change-Id: I295c67ab8d7596bf54cc69d088ef1df906f58d5f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41036
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The git checkout hint introduced in cb:36343 does not get printed but
executed instead. Escape the single-quotes to fix this.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I1277c3788a141b25cd9f22ec0476ee56b64aea4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The check for changed files, introduced in cb:36343 does not work
(anymore?) due to the quotes. Thus, drop them.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ie126e3d604990b2346f1f004f912080104e2789d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Certain boards require SeaBIOS' HARDWARE_IRQ option to be
deselected in order for the platform to boot. Add a Kconfig
to allow selection of HARDWARE_IRQ enablement, and write to
SeaBIOS' .config file in cases where it needs to be disabled.
Deselect the option for google/rambi variants so they boot
with boards defaults.
Test: build/boot google/clapper, verify board boots vs hanging
at boot menu prompt.
Change-Id: I23e9b30d2d1042c86bd10f134d6fe361edaf8cb2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
-n needs to check against a string, but if CONFIG_TIANOCORE_BOOTSPLASH_FILE
is unset, then $(CONFIG_TIANOCORE_BOOTSPLASH_FILE) evaluates to nothing
and the check fails, leading the Makefile to try and copy a non-
existant file/path.
Change-Id: Iff717dd48748cff16f485bafaa91c7a225fb5bdb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia25d4ce9260fa8c00fdea0e19f5e927559371af0
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Allow a custom boot splash to be used with UefiPayloadPkg:
- remove Kconfig guards restricting to CorebootPayloadPkg
- set destination path for logo file based on bootloader selected
Test: build/boot qemu with UefiPayloadPkg with custom boot logo
Change-Id: Ia0a10d1528f516f6b9d3645b83be0fb4e85bc348
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Recent changes to upstream edk2 necessitate ensuring
that Tianocore's submodules exist and are up to date,
otherwise building UefiPayloadPkg will fail.
Change method used to detect a dirty tree so that initialized
submodules do not taint the result.
Test: build qemu with Tianocore UefiPayloadPkg option successfully.
Change-Id: Ie2541f048966ec0666d8196508ccdb6c5f089de6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds the path to chrome EC headers to the depthcharge
build. Depthcharge currently includes a manually maintained copy of
the EC headers which are perpetually out of sync with the real
interface definitions. By adding the include path, we can build
depthcharge with the actual EC interface definitions and eliminate the
manual maintenance of copies of EC headers. Once the include path is
in place, we can remove the copies of the EC headers from depthcharge.
BUG=b:152373049
Change-Id: I1ce0ad9dc99ea52f177d4fb034fd23efd95a7864
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
For a very long time, SeaBIOS sometimes failed to build when using
multiple threads. This known problem has been haunting everyone for a
very long time. Until now.
Unlike most other payloads, building SeaBIOS results in two files: the
SeaBIOS payload itself and SeaVGABIOS. Each file has its own target, and
there's a third target called "seabios", which has the same recipe as
the SeaBIOS file, which calls `payloads/external/SeaBIOS/Makefile` with
a bunch of arguments. In addition, SeaVGABIOS depends on "seabios".
When executing serially, if the file of either SeaBIOS or SeaVGABIOS is
needed, the SeaBIOS Makefile will be run. This will generate both files,
so it is not necessary to run the Makefile more than once.
However, when using multiple threads, it can happen that one thread
wants to make the SeaBIOS file, while another one wants to make the
SeaVGABIOS file, which depends on "seabios". This implies that both
threads will execute the SeaBIOS Makefile at about the same time, only
to collide when performing git operations. Since git uses a lock file
when updating the index, one of the threads will fail to acquire the
lock with an error, which will ultimately cause the build to fail.
Whenever this happened, manually aborting with Ctrl-C made the build
process fail again because of the same error. The only way to get past
this problem, other than using one thread, was to let the unfinished
jobs complete. The thread that acquired the lock on the SeaBIOS git
repository would finish building SeaBIOS, so that target would not need
to be remade. When restarting the build, only the target that failed is
rebuilt, so it does not collide with any other thread.
To address this issue, make the SeaVGABIOS file target depend directly
on the SeaBIOS file instead, and remove the duplicate "seabios" target.
Change-Id: I251190d3bb27052ff474f3cd1a45022dab6fac31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Upstream UEFIPayload[1] now includes support for PS2 keyboards, but
defaults it to disabled. Enable it, as CorebootPayload does.
Note that this increases payload size in coreboot by a little over 5 KiB.
1. https://github.com/tianocore/edk2/commit/33a32936510ecff00d0b6aeaeb9c8b2bf5430b8b
Change-Id: If6d468809142a0049ce1648217d62b070229ad6b
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38960
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The build process of this payload is unnecessarily prolix. Therefore,
make use of the `-q` flag to abridge the output.
TEST=When building for X64, UEFIPAYLOAD.fd does not differ.
Change-Id: I6eba069ff5be2813d180dae40ab10155f0542f33
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39123
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'.
Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SeaBIOS 1.13.0 has been tagged on 20191209. Major changes in this release:
* Support for reading logical CHS drive information from QEMU
* Workaround added for misbehaving optionroms that grab "int19"
* The TPM 2 "PCR bank" option can now be set from the TPM menu
* SeaVGABIOS support for QEMU "atiext" display
* Several bug fixes and code cleanups
see http://seabios.org/Releases
Change-Id: I37c8a72b0819bc4d19da9f7ab8e90f907e3e4dec
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Kconfig became stricter on what it accepts, so accomodate before
updating to a new release.
Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for
boards not configuring it.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When 'make clean' is executed and there is no source code cloned for
GRUB2 in payloads/external/GRUB2/grub2 (so GRUB2 has never been used on
this tree) an error message is thrown:
"fatal: cannot change to 'grub2': No such file or directory"
This error happens when there is no grub2 directory and is caused by
line 20 in payloads/external/GRUB2/Makefile where a shell command is
used to check the state of the git repo for grub2. Thought the target
for this code (checkout) is not executed by 'make clean' the shell
evaluates the command as part of the Makefile sourcing and encounters a
missing directory.
This patch fixes this error by checking for the project directory before
the git status of the repo is evaluated.
Change-Id: Ieaa919e1ee5ec2a1ec3c840fa07a6ec16d230e88
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
