| Age | Commit message (Collapse) | Author |
|---|
|
UPL requires the Shim Layer, and those patches exist in the
`starlabsltd` fork.
Set the repository to custom, to allow this fork and branch to
be selected correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieca72498bde51a184d689670449b66ccc78d658a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81277
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since
all code is BSD licensed anyway.
It also moves some code from libpayloads stdlib.h to
commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is
useful for a subsequent commit that adds devicetree.c into commonlib.
Also we don't support DMA on arm platforms in coreboot (only libpayload)
therefore `dma_malloc()` has been removed and `dma_coherent()` has been
moved to architecture specific functions. Any architecture that tries to
use `dma_coherent()` now will get a compile time error. In order to not
break current platforms like mb/google/herobrine which make use of the
commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a
stub has been added to arch/arm64/dma.c.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The using config string for amd64 as UROOT_ARCH contains typo
Correct using CONFIG_LINUXBOOT_X86_64
BUG = N/A
TEST = Build boot facebook monolith
Change-Id: I6cfefb3f8e4e61bd56ca0fe3239000db8c07b088
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77605
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move hard-coded repo and repo name to Kconfig as default value
DEPTHCHARGE_REPO default to:
https://chromium.googlesource.com/chromiumos/platform/depthcharge
DEPTHCHARGE_BRANCH default to:
origin/main
When DEPTHCHARGE_MASTER=y, DEPTHCHARGE_BRANCH can be used to point
out a particular branch.
This change enable to use mirrored internal depthcharge repo and
branch for early SOC development (before upstreaming SOC and
dephthcharge code).
TEST=Build coreboot and check the repo remote link from:
payloads/external/depthcharge/depthcharge
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Icca10aa770b7b7a6e010f58bcf1e4f0a3401681a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80726
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
|
|
Build the Linux kernel with the same amount of jobs as coreboot.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie7af5aef4560b8d4dd840d9c578f8a2a4c387400
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78644
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Iea569fd457b3cd1f4746fbc6a96319eb42733a6b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80586
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie7038712de8cc646632d5e7d29550e3260bf2c62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80103
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I267d341075b907ac72439cf28c2c1458cbeb8d4b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: Idfe479272abf2db93f8fc4bc1ba02d8b8072fcfe
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: Ieef433e9d6745c6243b4823c9a7f250d3c53ebcb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78926
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Guard multiple options depending on another with an if-block. It's not
needed to repeat the condition for every option.
This also cleans up the ordering of the options and groups all options
related to iPXE.
Change-Id: I9e74ab567f619a2d5c20c6c0282b37193d9ac01b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78925
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since #c4fdec0a83d69bd0399b1b4351fa9c3af3c6fd65, edk2/master will
work with coreboot without modification.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8350f5114445d2608861ef6e807f958e598dfe07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Instead of redirecting the output of sed into a temporary file and
copying it to its target then, just tell sed to do the replacements
in-place and don't let it create a backup of the original file. The
overhead is not needed.
Change-Id: I442616cd78098b653af5bd49bc7a4f021c99e081
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
uImages are generated for non-x86 arch.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Icb1184497087d66a7cc6fd27402365a028cc4eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2023-06
to 2023-09. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202308), and fixes some USB detection issues, as
well the coreboot Kconfig for prefering internal or external boot
devices.
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
banshee, zork, frostflow with edk2 payload selected.
Change-Id: I7c5f9ae1ca4edd8211f55f4ecf2b3b495f473a43
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Disabling TPM support in edk2 can actually cause problems booting from
USB on some Intel-based boards with a CR50 TPM when using the edk2
GOP driver option, so rather than disable the TPM for all CR50 boards,
restrict the default to only AMD boards, where the boot hang with
TPM enabled was originally observed.
TEST=build/boot Win11, Linux from usb on google/fizz when built
with edk2 payload and edk2 GOP driver option selected.
Change-Id: I01509fea2dd42b741c00abcf9fb8b936e895b932
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78031
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Don't skip checking out the specified edk2 branch if the repo contains
untracked files, which may be the case if the EDK2_GOP_DRIVER option
is selected. Also ensure the submodule pointers are correct when
checking out.
TEST=build google/panther with GOP driver option and edk2 payload 2x,
switching branches between builds and ensure the correct branch is
used each time and submodules are synced with branch.
Change-Id: If7040bd5c49209b37a4b308485bf59352197d3b6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Several of the build commands passed by the Makefile only exist
in MrChromebox's fork of edk2. Guard these, and the corresponding
Kconfig options, against the selection of the MrChromebox repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I41d8d54e5b91990dd9fb88967fcd549a86cf6fe9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78036
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
initramfs is built always, ignoring CONFIG_LINUXBOOT_BUILD_INITRAMFS
Built initramfs only is CONFIG_LINUXBOOT_BUILD_INITRAMFS is set
BUG = N/A
TEST = Built and boot facebook monolith
Change-Id: I0d575ff7528fceb06b5394642527713bb071c8b3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77607
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the U-Boot version to the latest release. Also switch to github
since it is typically much faster to download than the existing URL.
Drop the 'experimental' tag since this payload is pretty stable. It is
also tested regularly in U-Boot's CI.
Change-Id: I082130539c3474593a82e4b21cb995380f4db168
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77149
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77463
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Fix regression introduced in I25e757108e0dd473969fe5a192ad0733f1fe6286
"payloads/external/LinuxBoot: Clean up".
Include the initrd into the payload. Allows to actually use LinuxBoot.
Change-Id: I5ab6b1a43a4100e83f4c188b9ea3451ab7b4ffe5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77412
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a Kconfig option to select memtest86+ version 6 as a secondary
payload and sets that as the default. The coreboot version 5 code may
still be selected and used if desired.
Compiling for 32 bit requires glibc from multilib installed, if the host
system is running on 64 bit, as header files, e.g. gnu/stubs-32.h, are
required from there. So introduce a new choice menu which allows to
choose between 32 and 64 bit.
By default, the stable 6.20 version is selected instead of the top of
the main branch.
TEST=Build both V5 and V6, boot them in QEMU
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: Ie0eedc25fcf37b925b072ca809c019a599a20392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Disable TPM support for CR50 TPM when using MrChromebox repo, since
it's not currently supported in edk2, and causes some boards (eg AMD
Zen-based) to failed to boot.
TEST=build/boot on google/frostflow
Change-Id: I64b5eb09d64eafd2bed400b7a7c97750cc368aed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77270
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig for passing a VBT file and GOP driver to edk2, and pass a
build param to use them along with the platform GOP driver. This allows
edk2 to initialize the display and change display modes, instead of
being limited to the single mode set by whatever display init method
coreboot might use (libgfxinit, FSP/GOP, VBIOS, etc).
TEST=build/boot multiple google boards spanning several platforms using
the edk2 GOP driver for display init.
Change-Id: I63a49df2411fe44b06eaee6d0fb9aab42ac8aedb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Fix regression introduced in I25e757108e0dd473969fe5a192ad0733f1fe6286
"payloads/external/LinuxBoot: Clean up".
Add creation of the build folder as necessary dependency.
Change-Id: Ie76c914f6a705de0c275a05b5af82ac21243d522
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77202
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5174e0457489c29be6a2b2b882de2db4255bbca0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This adds a missing prerequisite, because otherwise it can happen that
curl tries to put the downloaded kernel in a non existing build
directory
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I459172f794ab9c1010cebcff5e28f1454e136fba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This upgrades the tint payload to 0.07 version. The sources are
similar enough so that ..._libpayload.patch could be simply git-moved.
Change-Id: I0f6de3d0410e6d838fe49330d98620c877a0d2c7
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76820
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Restore the tint build system compatibility with the current version
of buildgcc script while preserving the backwards compatibility.
Change-Id: I45d3454b4527ee81c3927a5b3da2e9067c530fb0
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76819
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
U-Boot v2023.07 was released on Mon 10 July 2023.
https://source.denx.de/u-boot/u-boot/-/blob/master/doc/develop/release_cycle.rst#id5
Change-Id: Ie1c6f83bd12e959c29fad1b121c85eb0cf898e24
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2023-04
to 2023-06. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202305), and fixes issues booting on AMD Zen
platforms (Picasso and newer).
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
banshee, zork, frostflow with edk2 payload selected.
Change-Id: I4867d453514f2b00f66ffdad50e091e5b80afdcb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The linux.mk makefile needs to be guarded, because it introduces a
dependency on the perl tooling.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ieb7aac672072858e0d6811628887f6a9eb9a8cb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The u-root.mk makefile needs to be guarded, because it introduces a
dependency on the go tooling.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ia89e4e7b9a1f73a7b622eeaa8d6148d99f9b327a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There were some issues with the current Linuxboot Makefiles.
- multithreaded compilation didn't work, because some prerequisites
were missing
- initramfs wasn't added for x86 qemu boot.
- riscv support was incomplete
It began with separate patches, but resulted in a clean up patch, that
is hard to separate. The most important changes are the following:
- Instead of phony targets, actual files are now used as prerequisites
- riscv can now be used as target
- initramfs works now also for x86
- instead of querying the most recent version from the internet, I set a
known working version (because I tested it) that can be customized
and/or upgraded in the future. The reasons:
- querying the version from the internet requires a constant
connection to the internet even after linux kernel is already
build (aka subsequent builds).
- one usually wants to use a known working version, but optionally
still have the posibillity to choose a custom one. This patch
introduces this possibility in its most simple form.
- I removed as much ifeq statements as possible and moved that
responsibility to Kconfig, because they tend to make the
Makefile less readable.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I25e757108e0dd473969fe5a192ad0733f1fe6286
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76150
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
It seems like the default branch for coreboot's Memtest86+ fork was
renamed from 'master' to 'main'.
TEST: Memtest builds correctly when selecting 'Main' for the Memtest86+
version option.
Change-Id: I269249518019f5d0d12c57f1c14012abca86b48b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76100
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It seems like the default branch for FILO was renamed from 'master' to
'main'.
TEST: FILO builds correctly when selecting 'HEAD' for the FILO version
option.
Change-Id: I6c355d757987551e850f9d24f6bfb14167cb8046
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76101
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This add's an option to use EDK2's Universal Payload instead
of the standard UefiPayloadPkg. Universal Payload requires
a ShimLayer, to build the required HOBs and pass them to Universal
Payload.
The ShimLayer is built to encompass UniveralPayload, so only
one ELF binary is added to coreboot.
Universal Payload is based on Intel's USF specification:
https://universalscalablefirmware.github.io/documentation/
This has been added with the repository pointing to
https://github.com/starlabsltd. The required ShimLayer patches
will be merged into edk2 master once corresponding coreboot
patches are merged.
This is because the EDK2 engineers believe it is an impossible
task to patch coreboot to build and use Universal Payload.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I17cc86d5eac0d5d91551ba5bea73fbc07ebdf0d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65934
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up edk2 build flag PcdPcieResizableBarSupport to coreboot
Kconfig CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5cc12d32c5e132b9f99ec650377d7683377c2a9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74926
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The stable version was over 5 years old. Update it to the current
main branch.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic9cbe5e3dad9f2ff06e1fa8f0582d4c8b3e81a22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
SMMSTORE requires 0x8000, compared to the default value of 0x10000.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I10d2a5a0c1d729d83e0b62bb9430863317b883cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
With the coreboot build process, `UniversalPayloadBuild.sh` calls
`UniversalPayloadBuild.py`. That Python script will unconditionally
build DXE as 64-bit, but accepts an argument for the entry point:
parser.add_argument('-a', '--Arch', choices=['IA32', 'X64'],
help='Specify the ARCH for payload entry module. Default build X64
image.', default ='X64')
Currently, ` -a IA32 -a X64` is passed, and the Python script will
use the `X64` argument, resulting in a payload that won't work with
coreboot.
Remove the `-a X64`, so the resulting build is a 32-bit entry point,
and 64-bit DXE, which works with coreboot.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a557d6e155a2938b44036d98f9274cc8b38f156
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73668
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Changes: https://review.coreboot.org/plugins/gitiles/seabios/+/refs/tags/rel-1.16.2
Change-Id: I19b31f89c8fc504284f327c975c159616eb1b241
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Rather than requiring another Kconfig symbol to be set, reuse the same
`make V=1` command argument. This simplifies rebuilds with a single
point of reference.
Also, this means that coreboot doesn't have to be rebuilt due to Kconfig
changes.
Change-Id: I9eba86b234768641a215095b8657e9d07832b1b5
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove the ABOVE_4G_MEMORY option as the option was removed in edk2
in commit dc5f2905ebfdf68ae28ce1081d435af0f8641dd9 (UefiPayloadPkg:
Always build MemoryTypeInformation HOB for DXE GCD
- https://github.com/tianocore/edk2/pull/4231).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d5ee79ef3f7ecfcd1463c612aad2e3d629df22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74336
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Now that MrChromebox's default edk2 branch supports Secure Boot, add a
Kconfig to enable it, and do so by default when MrChromebox's branch
is used and SMMSTORE_V2 is enabled (which is a prerequisite).
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
and banshee, verify Secure Boot options available in payload, Secure
Boot status reported properly by Linux/Windows.
Change-Id: I4be58c3315cabe08729d717c59203fdc6a3e2958
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74869
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2022-07
to 2023-04. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202302), and adds support for UEFI Secure Boot and
TPM 1.2/2.0 management (though it does not currently support Google
CR50/Ti50 TPMs).
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
and banshee with edk2 payload selected.
Change-Id: I096eaa4e065db731a70ba238ba5a3bb49e5db867
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74868
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To quote the gnu make manual: "A phony target is one that is not really
the name of a file; rather it is just a name for a recipe to be executed
when you make an explicit request. There are two reasons to use a phony
target: to avoid a conflict with a file of the same name, and to improve
performance."
Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add possibility to clone edk2-platforms repository. Some edk2
repositories may use modules from edk2-platforms which contains
various feature packages for Intel platforms, e.g VT-d driver if DMA
protection is enabled.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iabd0793dfdcb95260046dc992ff30ef581159db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68872
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Yabits is no longer maintained and git repo is archived.
Yabits has not been maintained for a long time,
the project is apparently closed.
Change-Id: Ida0bb79342448510d2c309339fabbe8066eca73c
Signed-off-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Building LinuxBoot with u-root newers releases can
providing a better experience,
Change-Id: Ie98f434c5296b7ba7c3750a766b244c747421baa
Signed-off-by: eliassouza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72465
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Renaming origin/master to just master fix error during cloning repo.
Error: Remote branch origin/master not found in upstream origin
Change-Id: Ib5d4bb0277076842f8a8400eb61da9ad23465b66
Signed-off-by: eliassouza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Old wiki is outdated for years but Kconfig help messages
of some payloads still reference it.
This commit changes those links to the corresponding page at
doc.coreboot.org.
Change-Id: I81653f1b010d8a3ac4dfc4c6ad4fa714ce5d59a1
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
GRUB2 was released on June 8th, 2021 [1].
[1]: https://lists.gnu.org/archive/html/grub-devel/2021-06/msg00022.html
Change-Id: I050a78c769c3cd4c9ae627c7e3124a4894a018d7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Short summary:
- virtio-blk.{mmio,pci} and virtio-scsi.{mmio,pci} improved.
- Several fixes and code refactor pci_config_*() functions.
- Improved AML parsing.
Change-Id: I04b35d006a2bcd1621e28ac2f1b12b9af99b7552
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71064
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With -Os grub-mkimage does not create an elf with the correct entry
point because some parts of the elf images are placed in
.text.unlikely. The linker does not know where to place that and
places it below .text, hence messing up the entry point. To avoid this
use the compiler flag -fno-reorder-functions.
Change-Id: Ic4a12f45d30b781870faa38575e8b2c10e0a42e8
Resolves: https://ticket.coreboot.org/issues/343
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64235
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Hackware <human@hackware.cl>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic1d407eab8ec4569e02729afb5c71f39ce174401
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68815
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Shimlayer recipe requires OBJCOPY, so declare it at the top of
the Makefile so this recipe works as intended.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2e04dfe18df6252261836dcdf98f7e8de65287b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id6363c92f8155007e05c682694d7413fd4630b6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The ShimLayer is required to start the Universal Payload. It will build
the required HOBs and pass them accordingly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I043271994f40813d9059a89420d4311d9d5802b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add a recipe to build UniversalPayload.elf, which uses a wrapper for the
UniversalPayloadBuild.py that is hosted in the edk2 repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2aa318513244f576e07e72713fad3b4f7bd7c22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Specifying a build target only applies to UefiPayloadPkg, so guard it
against the relevant Kconfig option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia4597b5ed76616e39cec45f8a69be9f1ccd72d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The silent switch, `-s`, only works for building UefiPayloadPkg. Guard
it against the relevant Kconfig option so that it doesn't cause
problems with other targets.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5a5df636e6484a435c849c6d19c7cb61e8e62ee6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68181
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upstream edk2 doesn't work, but we still have the option for it
for testing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6ec9f4746640baa030762650ab7b83d85ab8c1e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add EDK2_VERBOSE_BUILD which removes the `-q` and `-s` switches
so the build log becomes verbose.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iaf1e96657f43edddfa4de0d3e00f3b24e7eb855b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67677
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Until recently, there were two options to build edk2, UefiPayloadPkg and
CorebootPayloadPkg. Now, there is only one, UefiPayloadPkg but soon,
there will be Universal Payload.
It makes more sense, as the official edk2 repository doesn't work with
coreboot, to have the build target and repository separate. That will
allow for building either UefiPayloadPkg or Universal Payload from the
official repository, MrChromebox' fork or a custom repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If7f12423058ef69838741f384495ca766ccea083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
skiboot's Makefile always executes $(CC) to determine whether its clang
or GCC and not setting CROSS for clean target results in this annoying
output (assuming `powerpc64-linux-gcc` isn't available):
make[2]: powerpc64-linux-gcc: No such file or directory
Change-Id: I242b2d7c1bdf1bbd70fd4e4e0605341fe8301ca5
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Whilst UefiPayloadPkg is always built with support for 32-bit
and 64-bit, this is not the case for all edk2 targets. Move this
to the build command so they can be specified on each target.
Also add the `-s` switch, which stands for quiet to suppress edk2
printing War and Peace whilst building.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If94abd4e28917718c76ad5945966e7be668c8f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66364
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the update recipe, which updates the edk2 repository, to
$(EDK2_PATH). There is no functional change here.
This recipe must be phony so it runs every time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I30fedbee7459b79a85a23678e0075368eda95da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66363
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When cloning edk2, download the submodules at the same time. There is
no functional change here, just a minor speed improvement.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieeb481346093588bd8d237857966001dc81460b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66362
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
First, remove the `-p` flag; as it's a file target it's not needed in
this case.
Second, remove the clone as this is handled in the update recipe.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3829a3151be2d05a067a160fa770e5eb7ad4aad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66361
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Separate the tasks that are required to be completed prior to building
edk2 into a prep recipe. This allows this to be used for building
different targets.
This also ensures that the COREBOOT toolchain is used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic4ae8ac4118a5747f38297d0fbf4cb53aa3b6d6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66359
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Separate the Release String from the Build String. This allows
the makefile to locate built files more precisely.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id98674f0bbf485b2bfdbf5784d325c5ac89ad076
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66358
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current edk2 makefile will work in a directory that's name is
derived from the repository, such as `mrchromebox` or `starlabsltd`.
Move this under a directory, so that it can be ignored by git and
so that the makefile can be adjusted to use file targets, rather
than phony recipes with wildcards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If0c80dbc59130f229b78cab9578115e14172301d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66356
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Logo.bmp is overwritten with a custom one from coreboot. This needs to
be restored before the branch is updated otherwise git will report that
the repository is dirty.
Move this to the update recipe so that will always be done for any
recipe that needs to update the branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85bf753a47d9e70d6555dec9a539e8ed7395bead
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66355
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the code that prints the edk2 build options to it's own recipe
so that it can be called for different targets.
This change also fixes the print, as it accounts for recent switches
such as `--pcd` and `-s`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie797ca26cd28eab0f633bd8dee5ec19634fcea99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
the missing `; \` at the end of the line meant subsequent lines
were no longer run from $project_dir, so Logo.bmp was silently
failing to restore. This led to the working dir being dirty,
and on subsequent runs, any change to a different branch in the
same repo would fail.
Change-Id: I17a323bc2dda19b69d809e398b273f24e14b43af
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66321
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update MrChromebox’ default branch from uefipayload_202107 to
uefipayload_202207.
This is based on upstream edk2, commit f26b70c (UefiPayloadPkg:
Add support for logging to CBMEM console).
Tested on:
* StarBook Mk V
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16a012485e4b4957439e776914ffd016b4506a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66083
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow passing custom build parameters to any version of edk2, not
just forks.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4eed535415ba15ae73e22cada9153820538f5f6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Bind the PCDs that allow edk2 to use the whole display to a
Kconfig option called TIANOCORE_FULL_SCREEN_SETUP.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The `call int-multiply` couldn't handle the Kconfig option being a
string so do the calculation in bash.
Tested on:
* Qemu
* StarLite Mk III
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1879d7efd504e2c42dadb12d2d8add4f69ca7b9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66161
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This caused edk2 serial output to be disabled 100% of the time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If272369b405e7745fe82f49026cbed0abc50f355
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
converting the SVG logo to BMP at compile time using 'convert'
introduces terrible aliasing artifacts, so use a properly converted
BMP file as the default instead.
Test: boot qemu w/Tianocore, observe lack of aliasing in coreboot logo
Change-Id: I62d643c24abca57fa35b79732d8cedc83b94815f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
commit 108e53792804
("payloads/tianocore: Add a proper target for the Boot Splash")
introduced 2 bugs in bootsplash handling:
- the "logo" make target added a spurious "/edk2" to the project dir
- the "logo" make target failed to account for the case where no user-
defined logo file is used (the upstream Tianocore one will be used
in this case)
Fix both these issues.
Test: build/boot qemu w/Tianocore w/o user-defined bootsplash file.
Change-Id: Ieebc547670213459823f58956ae87c6bf94b74ef
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
revalant ---> relevant
Change-Id: Id31a57644947bf8c0f461dbfc9ca8b1984e9acb8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66151
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
edk2's default is to show a Boot Splash with their own logo which
looks like it's from the 1960's. Therefore, we replace this image
with coreboot's logo, taken from https://coreboot.org unless a
custom one is specified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1b133e2a2cfd45a6650e4523b267f7508974137b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Firstly, change the unit of `μs` to `ms` so it's easier to read.
This patch changes the default amount of time allowed to initialise
SD Card Readers and eMMC drives from 1ms to 10ms. Having a timeout
too short will stop certain devices from booting, which was seen on
google/akemi; it throws an exception when attempting to boot from
the internal eMMC drive.
This new value is still lower than upstream edk2's value of 1s.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id1f66d5d50f889f07a34836ab2932b28ef7fb245
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Markdown, definition file and sconfig source codes don't need to be
executables. This patch fixes that.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: Ic97d684318c689259f7895e3dfbd552434c3882e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Limited to two legacy build options to only be set when
CorebootPayloadPkg is used, as they don't exist in UefiPayloadPkg.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I71aaa940543075962e167b52b23f45976d39c616
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Set all PCDs relating to console size to 0, which allows edk2 to
use the full framebuffer.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id105a2c822a2b05da6e45dac9deeca1f155bfa33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Hook up edk2 build options PCIE_BASE_ADDRESS and PCIE_BASE_LENGTH to
CONFIG_ECAM_MMCONF_BASE_ADDRESS and CONFIG_ECAM_MMCONF_LENGTH.
This patch has been reviewed upstream but not yet merged (2022/07/08).
It won't cause any problems for any existing branches or forks that do
not have this build option hooked up.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie5d50cc4619354d3c98adf6cde12c192be759869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Show the build options that are passed to edk2 in one clear block.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I917a8c1d3ac8f2a223e584fec10689679835630c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I12a18acd24a0aede8113e1daa607c852eba67049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
versions
Most of the Kconfig options are upstream, so they should exist in
most forks. Therefore, allow them to be set and passed when using
a custom repository or upstream edk2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I31e6e267ee6e4e3a254f733e1dfc1ecb3a3d3576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
