Age | Commit message (Collapse) | Author |
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5174e0457489c29be6a2b2b882de2db4255bbca0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
There were some issues with the current Linuxboot Makefiles.
- multithreaded compilation didn't work, because some prerequisites
were missing
- initramfs wasn't added for x86 qemu boot.
- riscv support was incomplete
It began with separate patches, but resulted in a clean up patch, that
is hard to separate. The most important changes are the following:
- Instead of phony targets, actual files are now used as prerequisites
- riscv can now be used as target
- initramfs works now also for x86
- instead of querying the most recent version from the internet, I set a
known working version (because I tested it) that can be customized
and/or upgraded in the future. The reasons:
- querying the version from the internet requires a constant
connection to the internet even after linux kernel is already
build (aka subsequent builds).
- one usually wants to use a known working version, but optionally
still have the posibillity to choose a custom one. This patch
introduces this possibility in its most simple form.
- I removed as much ifeq statements as possible and moved that
responsibility to Kconfig, because they tend to make the
Makefile less readable.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I25e757108e0dd473969fe5a192ad0733f1fe6286
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76150
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
It seems like the default branch for coreboot's Memtest86+ fork was
renamed from 'master' to 'main'.
TEST: Memtest builds correctly when selecting 'Main' for the Memtest86+
version option.
Change-Id: I269249518019f5d0d12c57f1c14012abca86b48b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76100
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This add's an option to use EDK2's Universal Payload instead
of the standard UefiPayloadPkg. Universal Payload requires
a ShimLayer, to build the required HOBs and pass them to Universal
Payload.
The ShimLayer is built to encompass UniveralPayload, so only
one ELF binary is added to coreboot.
Universal Payload is based on Intel's USF specification:
https://universalscalablefirmware.github.io/documentation/
This has been added with the repository pointing to
https://github.com/starlabsltd. The required ShimLayer patches
will be merged into edk2 master once corresponding coreboot
patches are merged.
This is because the EDK2 engineers believe it is an impossible
task to patch coreboot to build and use Universal Payload.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I17cc86d5eac0d5d91551ba5bea73fbc07ebdf0d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65934
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up edk2 build flag PcdPcieResizableBarSupport to coreboot
Kconfig CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I5cc12d32c5e132b9f99ec650377d7683377c2a9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74926
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Rather than requiring another Kconfig symbol to be set, reuse the same
`make V=1` command argument. This simplifies rebuilds with a single
point of reference.
Also, this means that coreboot doesn't have to be rebuilt due to Kconfig
changes.
Change-Id: I9eba86b234768641a215095b8657e9d07832b1b5
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove the ABOVE_4G_MEMORY option as the option was removed in edk2
in commit dc5f2905ebfdf68ae28ce1081d435af0f8641dd9 (UefiPayloadPkg:
Always build MemoryTypeInformation HOB for DXE GCD
- https://github.com/tianocore/edk2/pull/4231).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d5ee79ef3f7ecfcd1463c612aad2e3d629df22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74336
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Now that MrChromebox's default edk2 branch supports Secure Boot, add a
Kconfig to enable it, and do so by default when MrChromebox's branch
is used and SMMSTORE_V2 is enabled (which is a prerequisite).
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
and banshee, verify Secure Boot options available in payload, Secure
Boot status reported properly by Linux/Windows.
Change-Id: I4be58c3315cabe08729d717c59203fdc6a3e2958
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74869
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To quote the gnu make manual: "A phony target is one that is not really
the name of a file; rather it is just a name for a recipe to be executed
when you make an explicit request. There are two reasons to use a phony
target: to avoid a conflict with a file of the same name, and to improve
performance."
Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add possibility to clone edk2-platforms repository. Some edk2
repositories may use modules from edk2-platforms which contains
various feature packages for Intel platforms, e.g VT-d driver if DMA
protection is enabled.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iabd0793dfdcb95260046dc992ff30ef581159db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68872
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Yabits is no longer maintained and git repo is archived.
Yabits has not been maintained for a long time,
the project is apparently closed.
Change-Id: Ida0bb79342448510d2c309339fabbe8066eca73c
Signed-off-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id6363c92f8155007e05c682694d7413fd4630b6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add EDK2_VERBOSE_BUILD which removes the `-q` and `-s` switches
so the build log becomes verbose.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iaf1e96657f43edddfa4de0d3e00f3b24e7eb855b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67677
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Until recently, there were two options to build edk2, UefiPayloadPkg and
CorebootPayloadPkg. Now, there is only one, UefiPayloadPkg but soon,
there will be Universal Payload.
It makes more sense, as the official edk2 repository doesn't work with
coreboot, to have the build target and repository separate. That will
allow for building either UefiPayloadPkg or Universal Payload from the
official repository, MrChromebox' fork or a custom repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If7f12423058ef69838741f384495ca766ccea083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current edk2 makefile will work in a directory that's name is
derived from the repository, such as `mrchromebox` or `starlabsltd`.
Move this under a directory, so that it can be ignored by git and
so that the makefile can be adjusted to use file targets, rather
than phony recipes with wildcards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If0c80dbc59130f229b78cab9578115e14172301d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66356
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
SMMSTORE support in edk2 was not allowed in upstream edk2
as it was bootloader specific.
Shortly, it will be built from edk2-platforms and then,
it will be retired.
For now, the patches exist in the MrChromeBox fork (TIANOCORE_UEFIPAYLOAD), so enable
these by default when SMMSTORE_v2 is enabled.
Change-Id: I1861bf739c2e25f661b4f06a303348f0537dc8b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65867
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bind the PCDs that allow edk2 to use the whole display to a
Kconfig option called TIANOCORE_FULL_SCREEN_SETUP.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic977a199f3b308c566391e37f126c4fe518b2eb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This caused edk2 serial output to be disabled 100% of the time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If272369b405e7745fe82f49026cbed0abc50f355
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66160
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Hook up edk2 build options PCIE_BASE_ADDRESS and PCIE_BASE_LENGTH to
CONFIG_ECAM_MMCONF_BASE_ADDRESS and CONFIG_ECAM_MMCONF_LENGTH.
This patch has been reviewed upstream but not yet merged (2022/07/08).
It won't cause any problems for any existing branches or forks that do
not have this build option hooked up.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie5d50cc4619354d3c98adf6cde12c192be759869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I12a18acd24a0aede8113e1daa607c852eba67049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The u-root toolkit dropped the original uinit bootloader in the master
branch and respectively the systemboot-option in templates.go. In
consequence the LinuxBoot builds will boot into the u-root shell and
waiting for input. This commit enables the reuse of the -uinitcmd flag
to specify a command, which runs after the u-root init-process.
Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device
selection. Other preselections, i.e. stboot and boot2 are implemented as
well. Custom strings or programs can be set as well, but they cannot
contain program flags. E.g. 'fbnetboot -class linuxboot' will not work,
because they aren't symlinkable.
This commit and its respective LinuxBoot builds with systemboot, none
and one custom option have been tested successfully on a UP squared
single board computer with the intended behavior.
Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently, custom TianoCore builds are allowed, but those may need
different parameters. Add a Kconfig option to specify additional
parameters to be appended to build command.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I025459ae94592103b4be0c68b422100b7c649d34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
coreDOOM is a port of DOOM to libpayload, based on the doomgeneric
source port. It renders the game to the coreboot linear framebuffer,
and loads WAD files from CBFS.
Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the
libgfxinit provided linear framebuffer.
Project page: https://github.com/nic3-14159/coreDOOM
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Also known as "SeaGRUB", running GRUB2 atop SeaBIOS proves to be a
useful configuration, since SeaBIOS has improved its hardware
compatibility. For example, some USB drive can work under SeaBIOS but
do not work under native GRUB2, and GRUB2 can use BIOS call (provided
by SeaBIOS) as a fallback method to access hardware if it is present.
But more option is added addition to "SeaGRUB": now GRUB2 and SeaBIOS
can be built as secondary payloads, and "SeaGRUB" is now implemented
as "Primary SeaBIOS + Secondary GRUB2 (selected) + config files".
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ie681fa231abfe4a8f1e4510b3c17957550a9d2f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
By default, edk2 allows 1000000μs for SD Card Readers and eMMC to
initialize which is excessive and causes a boot delay. This makes
the value configurable and uses a default of 1000μs which is sufficient
for the majority of readers. The value of 1000μs was hardcoded in
MrChromeBox's fork for around 2 years with no reported issues.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I873bcddf6f37a9eaae5c84991b3996d51fb460d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add TIANOCORE_PRIORITIZE_INTERNAL which, when enabled, will build edk2
with boot from internal devices before external devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib1f73c8f3f2f2376cdc197b58d259446dc5f0138
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_PS2_SUPPORT which, when enabled, will build edk2
with PS/2 keyboard support.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibabce6ac1ac68ab958610d42c77f3c2c494528ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_HAVE_EFI_SHELL, which when enabled, will build edk2
with the EFI Shell binary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1272f514e3f5becfe1fddd58ca0d820c5d1c1b54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adds TIANOCORE_FOLLOW_BGRT_SPEC which, when enabled, will follow
the BGRT Specification implemented by Microsoft and the Boot Logo
will be vertically centered 38.2% from the top of the display.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If508166fe657d1cc032dd09a0fa231c7b60d9846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add TIANOCORE_BOOT_MANAGER_ESCAPE which, when enabled, will use
Escape as the hot-key to access the Boot Manager. This replaces
the default key of F2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1e60d116367542f55f0ffa241a6132e4faabe446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
1. Fix the inconsistence of the target path of U-Boot payload
between Kconfig and Makefile.inc.
2. Perform full clone (to the destined commit) in order to get
tags.
3. Move stable commit id of U-Boot payload from Makefile to
Kconfig, and make prompt consistent with it.
Change-Id: Ic0f11c16274456a452a0422e19fab0c61d8b5d5b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The u-boot.bin file should be used, rather than u-boot-dtb.bin
While they are often the same, the -dtb version is really just for
legacy use now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This doesn't work at present, merely printing an error when U-Boot is
selected as a payload. This is because it adds a file into the U-Boot
tree which makes U-Boot's build system think that the tree is unclean.
Update the rules to put the tag file outside the source tree. Use an
out-of-tree build for U-Boot to avoid changing the source tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I24d6545b54f97afeefaca3ffed79eec2e7afacb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some older devices, like the x230 Thinkpad, do not boot with the
newer Tianocore UefiPayloadPkg build target, and cannot easily be
debugged without serial UART output. As a stopgap solution, re-add
the older (now deprecated/removed) CorebootPayloadPkg build target.
This partially reverts commit d3b49b4c,
"payloads/Tianocore: Update default build target, simplify build options"
Change-Id: I81490c277626fc69d95920868d80cb24c0763de4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig option TIANOCORE_ABOVE_4G_DECODE to pass build option to
edk2 to enable or disable "Above 4G Decode". Disabling allows certain Linux
distributions to boot such as Qubes, Zorin and Proxmox.
Requires commit `2f6d4cbcc7fa49462e607baed7626524ccd59ad3` that is
present in the `uefipayload_202107` branch of MrChromebox's edk2
repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3b1d15196c0ec611431af29031682fea626d19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
FILO allows to configure a line to autoboot. Hook this up into
coreboot’s build system.
TEST=Configure coreboot for QEMU i440fx with FILO as payload and
configure:
CONFIG_FILO_MASTER=y
CONFIG_FILO_USE_AUTOBOOT=y
CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img"
CONFIG_FILO_AUTOBOOT_DELAY=5
Boot Debian image with:
qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22
Change-Id: Id167e9a144bf466da87469108002672b299b702a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Logging to coreboot cbmem, instead of a serial console, was
added to MrChromebox's uefipayloadpkg branch. Add a Kconfig
option to enable this, and restrict it to the UEFIPAYLOAD
payload option, since this feature does not exist in upstream
edk2.
Change-Id: Idef125235dc7ba885eb22ac69c6f752588a9e295
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Drop the deprecated COREBOOTPAYLOAD option, and replace it with MrChromebox's
updated UefiPayloadPkg option. Simplify the Kconfig options to make it easier
to build from upstream edk2 master. Drop the TIANOCORE_USE_8254_TIMER Kconfig
option since it applied only to CorebootPayloadPkg. Clean up the Makefile now
that we're only building from a single Tianocore package/target.
Test: build/boot qemu Q35 target with both UefiPayload and Upstream options.
Change-Id: If545fbd0c30be6dcc6ff43107b80980fa23a527e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54019
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They all operate on that file, so just add it globally.
Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying
the file in some way. When running them in parallel, coreboot.pre can be
read from and written to in parallel which can corrupt the result.
Add a function to create those rules that also adds existing
INTERMEDIATE targets to enforce an order (as established by evaluation
order of Makefile.inc files).
While at it, also add the addition to the PHONY target so we don't
forget it.
BUG=chromium:1154313, b:174585424
TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2
timeout and sercon) and saw that they were executed.
Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I125e40204f3a9602ee5810d341ef40f9f50d045b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48897
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a Kconfig option to set the tianocore boot timeout,
which is passed to the payload via a command line parameter.
Allows boards without an internal display (eg) to set a longer
boot timeout, in order to ensure the boot splash/menu prompt
are visible upon boot.
The associated changes on the tianocore side have already been
merged into MrChromebox's CorebootPayloadPkg and UefiPayloadPkg
branches (coreboot_fb and uefipayloadpkg respectively).
Change-Id: Ifeaadff05f6667d642c05b81f53c1d2dbc450af6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove copyright notices and other unnecessary churn.
Change-Id: Ie69cc121d2b6eed95aa3cbaa7215d61880148858
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47815
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 14ca7407196 (Makefile.inc: Move adding SeaBIOS cbfs config files)
introduced various regressions that were not spotted during review.
TEST=Building with SEABIOS_THREAD_OPTIONROMS is working properly again.
Change-Id: I4de0b11747e3df8dd31a85160add129d8cc6bd8a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47814
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using the INTERMEDIATE target this can be done in the proper dir.
Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BOOTBOOT is a multi-platform, architecture agnostic boot protocol.
The protocol describes how to boot an ELF64 or PE32+ executable inside
an initial ram disk image into clean 64 bit mode. This version uses
libpayload to do that. Depending on the lib's configuration, initrd
can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT
partition or a file on a FAT formatted ESP partition.
For more information see https://gitlab.com/bztsrc/bootboot
Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0
Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I17ae7450a9641268fe392bed0f24846abc8e6f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43203
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id305d9edecac9e9cd305301e9dc5af6678ef7528
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Used commands:
perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
Change-Id: I9f74ed19257bc4234465b8f912deff1b485173f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41179
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The hardware IRQ option was not passed to SeaBIOS Makefile and resulted
in HARDWARE_IRQ being permanently disabled regardless of Kconfig
selection in coreboot. On platforms that need the hardware IRQ it caused
hangs at boot menu or iPXE prompts.
TEST=enter SeaBIOS boot menu on Libretrend LT1000
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iafcfd743177bbcd1ee23e227c74dd8268c4c23c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia25d4ce9260fa8c00fdea0e19f5e927559371af0
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
For a very long time, SeaBIOS sometimes failed to build when using
multiple threads. This known problem has been haunting everyone for a
very long time. Until now.
Unlike most other payloads, building SeaBIOS results in two files: the
SeaBIOS payload itself and SeaVGABIOS. Each file has its own target, and
there's a third target called "seabios", which has the same recipe as
the SeaBIOS file, which calls `payloads/external/SeaBIOS/Makefile` with
a bunch of arguments. In addition, SeaVGABIOS depends on "seabios".
When executing serially, if the file of either SeaBIOS or SeaVGABIOS is
needed, the SeaBIOS Makefile will be run. This will generate both files,
so it is not necessary to run the Makefile more than once.
However, when using multiple threads, it can happen that one thread
wants to make the SeaBIOS file, while another one wants to make the
SeaVGABIOS file, which depends on "seabios". This implies that both
threads will execute the SeaBIOS Makefile at about the same time, only
to collide when performing git operations. Since git uses a lock file
when updating the index, one of the threads will fail to acquire the
lock with an error, which will ultimately cause the build to fail.
Whenever this happened, manually aborting with Ctrl-C made the build
process fail again because of the same error. The only way to get past
this problem, other than using one thread, was to let the unfinished
jobs complete. The thread that acquired the lock on the SeaBIOS git
repository would finish building SeaBIOS, so that target would not need
to be remade. When restarting the build, only the target that failed is
rebuilt, so it does not collide with any other thread.
To address this issue, make the SeaVGABIOS file target depend directly
on the SeaBIOS file instead, and remove the duplicate "seabios" target.
Change-Id: I251190d3bb27052ff474f3cd1a45022dab6fac31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for
boards not configuring it.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board
config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER.
This is mainly to avoid depthcharge config duplication.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
corebootpayload package in upstream TianoCore was replaced with
UEFIPayload, add external payload build option for UEFIPayload.
BUG=N/A
TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on
QEMU q35 after PCIE_BASE set.
Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass `XGCCPATH` instead of individual programs as that is what the
Makefile expects.
Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add two new options:
* Disable the prompt "Press Ctrl+B for the iPXE command line..."
Add a boolean that disables the initial 2 second timeout.
* Include a script that is executed instead of showing a shell.
Allows to add a script that will be included into the iPXE ROM.
Tested on Lenovo T500 and PC Engines apu2.
Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Refactor the linux kernel compilation.
Change-Id: Iea2e2c8a22a91bdd2e3f83cd3058426acec3eaba
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Add Kconfig options to use custom bootsplash file,
dependent on using MrChromebox's stable branch, with
help info conveying required file format.
Adjust Makefile to copy the custom bootsplash and
overwrite the default Logo.bmp file, handling both
absolute and relative paths, and restore the original
logo file after building so as to keep the working
directory clean.
Test: build with and without custom bootsplash, ensure
correct bootsplash displayed
Change-Id: I164f46777169801cff56633fd920bc81b7c8129a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Clean the u-root initramfs integration and add essential flags as options.
Now u-root automatically fetch updates and rebuilts itself to apply changes.
Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/29778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Clean and refactor the structure of the LinuxBoot payload integration,
to make it more modular and readable. The kernel and initramfs should
handled in separated makefiles.
tested with:
- qemu-i440fx (x86, x86_64)
- cavium CN8100 (arm64)
Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/c/29581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Merge the command-line and initramfs parser from 'a linux payload'
and 'LinuxBoot'.
GOAL: merge 'a Linux payload' and 'LinuxBoot'
Change-Id: I2d2aef5d07453b98e115af6ee06318c690def785
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/29510
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Yabits (Yet another UEFI bootloader) is designed to be a slim and quick
alternative to Tianocore. It is still under heavy development.
https://web.archive.org/web/https://yabits.github.io/
Change-Id: I132970e952c605c73cfe33dc47f20170ae8aa899
Signed-off-by: Martin Roth <martin@coreboot.org>
Reviewed-on: https://review.coreboot.org/28590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Change TianoCore payload default to use HPET timer. Add an option to use
8254 timer for legacy platform support.
BUG=N/A.
TEST=Build and boot up into UEFI shell on Whiskey Lake rvp platform.
Change-Id: I857704b0ca128fc9da193ae26a33c7cf89ad7320
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
* Update kernel versions
* Fix initrd path handling
Change-Id: Ia0641fd0c0db1e47ee4829b73871af662d4a6370
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/28401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Because the Kconfig configuration files for primary payloads are
already sourced via a wildcard pattern this change requires to
use another file name pattern.
Change-Id: I83b89f5e14618e8a487ebb044fcdd3c175662591
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Curley brace expansion is a bash-ism, so we can't use it for the
u-root command list.
This unfortunately also breaks the current Kconfig option since the
list needs to be separated by space instead of commas.
Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for ARCH=ARM64 and introduce CROSS_COMPILE for all architectures.
* Always compress kernel Image using xz
* Create FIT uImage containing the kernel, initramfs and DTB
* Add ARM64 defconfig for all SoCs
Change-Id: I9a0cc248283432fb2384956ca55e687d4127398c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Since SeaBIOS 1.11.0 implements serial console and etc/sercon-port
runtime config file is present in CBFS, SeaBIOS additionally
redirects iPXE output to configured IO port. For boards which use
the same UART for SeaBIOS and iPXE console it causes doubled
output.
The option is enabled by default and passes UART configuration
to iPXE Makefile as before. When unselected, only SeaBIOS handles
printing output from iPXE.
Change-Id: Ia3c74cfbee4f816782161fcff286a14f46be78c5
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
* Add LinuxBoot support
* Add u-root mode
* Download kernel and u-root from upstream sources.
* Add customization options
* Clean kernel only if directory exists
Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/23071
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 717ba748366cda19b7532897a5b8d59fc2cd25d9.
This breaks seabios and a few other payloads. This is not
ready for use.
Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/26310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Currently, adding a payload to CBFS using the build system, the warning
below is shown.
W: Unknown type 'payload' ignored
Update payload type from "simple elf" to "simple_elf" and rename the
word "payload" to "simple_elf" in all Makefiles.
Fixes: 4f5bed52 (cbfs: Rename CBFS_TYPE_PAYLOAD to CBFS_TYPE_SELF)
Change-Id: Iccf6cc889b7ddd0c6ae04bda194fe5f9c00e495d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26240
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both GRUB and SeaBIOS can chainload lzma compressed payloads.
Therefore it is beneficial to compress secondary payloads
like Memtest86+, coreinfo, nvramcui,... for both size reasons and
often also speed reasons since the limiting factor is generally the
IO of the boot device.
Tested with SeaBIOS and memtest86+ master on Thinkpad X220.
Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The MMIO address can change for different platforms
like Apollolake.
Change-Id: I6ec72d3a14f00212323a04e20d5a477dbc26b770
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The depthcharge .config only exists after depthcharge was built. Other
possible `PAYLOAD_CONFIG` files most probably miss a rule, too.
Change-Id: I8e6f79bb2bd07cbef1317f2623bbef9ca0e74880
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/22137
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This should make reproducible builds of coreboot with GRUB2 easier.
Change-Id: If855042945ab34f34c554e7490c811ec7b256980
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I376eea9a3e02b03010fc5c5a05199ea7b2813220
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We were explicitly passing CC and TARGET_CC to configure but overwrote
that decision later by passing CC (with the value of TARGET_CC) directly
to a recursive make call. The latter overwrite was introduced because
`unexport` alone doesn't work on variables that were specified on a make
command line (they are added to MAKEOVERRIDES and passed to further re-
cursive make calls).
Instead of unexporting random variables, unexport those that were actu-
ally passed from payloads/external/Makefile.inc and clear MAKEOVERRIDES.
Do not pass OBJDUMP as that is nowhere to be found in the GRUB sources.
And, last but not least, add --disable-werror because building GRUB is
very susceptible to changes in the flex version.
Change-Id: Iaff2c72e89a5a540fe365eacb84811d5cff9d4d4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/20990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update the existing tianocore payload (which didn't do any more than
adding an elf payload with a specific name) to fetch and build the
UEFI corebootPayloadPackage, using the coreboot toolchain for
compilation. Only checkout the commit when changing commit IDs or if
version is master, instead of every time it builds.
Currently working if patches are merged into the upstream edk2
repository (to be included in a follow-on patch).
Change-Id: I0bf4cedec2d6821ae2a04184ebb5cf88979ccee3
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Evelyn Huang <evhuang@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/15057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Since version 9332965 "serialio: Support for mmap serial ports", SeaBIOS
supports memory mapped serial ports. This patch automatically configures
SeaBIOS when the Hudson UART is enabled.
Change-Id: I072f6a957df7e143d790783546b0725bcd597d9c
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-on: https://review.coreboot.org/18025
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change is based on the following commit:
3aa91dc payloads/seabios: Add "git revision" to the SeaBIOS version menu
Change-Id: I9987e3673e70b5cb20173d1ddff6060f42a5374a
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/18352
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change depthcharge to not require a board-specific config file for
libpayload. If the Kconfig option is selected, use the settings
in libpayload/configs/defconfig instead.
Change-Id: I4fd1a5915472f28e757c62f3f2415716f1fdfc71
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18271
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the capability for specifying which version of depthcharge to
checkout and build. This is similar to the existing feature for
SeaBIOS.
The depthcharge makefile already contains some structure for checking
out master vs. stable however the calling Makefile.inc ingored this
feature. Add the command-line variable assignment for these, along
with a tree-ish for any revision.
Change-Id: I99a5b088cb0ebb29e5d96a84217b3bfa852de8ac
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18270
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Previously SeaBIOS's default was used (1). This patch defaults to
coreboot's console level instead which is approximately the same
verbosity as SeaBIOS and thus what a user would probably expect.
Change-Id: If79e5f40c9380bb527f870eeb7d0cb43faf00beb
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/18051
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I5480d6a5f2a6bbae4222e05bbe92eb717e1aff65
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/5109
Tested-by: build bot (Jenkins)
|
|
- Add comments dividing the payload sections.
- Move separate TINT and Memtest sections that were intermingled.
Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17046
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Including $(top) in the DOTCONFIG definition allows getting rid of the
$(top) prefix in payloads, which in turns allows providing a full path
for DOTCONFIG via the command line.
Change-Id: I7546a12cf4a2a146e32fef81121f45f83ba67ac8
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15826
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix the compiler errors with tint, improves the Makefile,
adds Kconfig integration and secondary payload option.
Change-Id: Ia99e30f566d5ccf0d083e52bf174970535daefc5
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/14989
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set CONFIG_GRUB2_EXTRA_MODULES from the Kconfig when building GRUB2.
This causes the specified modules to actually enter the built payload.
Change-Id: I345026af705ba8af77c6c12aba8e1bd4135e519c
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15203
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|