summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2022-08-13payloads/tianocore: Rename TianoCore to edk2Sean Rhodes
coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-14configs: Update prodrive hermesPatrick Rudolph
Enable resizable BAR support and allow up to 64GiB BARs. Change-Id: If484f474aed82bf7637926c29c1d8c2907f2a161 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-07-11mainboard/msi/ms7d25: Enable PTTMichał Żygowski
Original firmware ships with PTT enabled by default on poweron. PTT takes priority over SPI/LPC TPM so enable the CRB interface until coreboot implements a way to select the interface and adapt the API to handle any TPM detection. TEST=Boot the board and see PTT is detected by Windows and Linux Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I74dc2c4245388a9f134b27e313ef26124b952594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63834 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-11mb/msi/ms7d25: Configure PCIe Root PortsMichał Żygowski
Add the full PCIe root port configuration. Proper initialization of the root ports depends on the correct GPIO programming including virtual wires. Do not program the CLKREQ signals in coreboot to let FSP detect and configure CLKREQ pads. Otherwise the CLKREQ pads are reprogrammed by FSP despite having GpioOverride=1. The pads that should not be touched by coreboot are left commented in the board GPIO file. CLKREQ reprogramming caused undefined behavior when ASPM and Clock PM was being enabled by coreboot on PCIe endpoints of CPU PCIe x4 slot (coreboot printed a lot of exceptions and simply halted). TEST=Boot the MSI PRO Z690-A DDR4 WiFi with all PCIe/M.2 slots populated and check if they are detected and functional in Linux. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I50199d2caf54509a72c5100acb770bf766327e7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63656 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-07mainboard/msi/ms7d25: Add early support for MSI PRO Z690-A DDR4 WIFIMichał Żygowski
Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up up to romstage where it returns from FSP memory init with an error. What works: - open-source CAR setup - NCT6687D serial port with TX pin exposed on JBD1 header - SMBus reading SPD from all 4 DIMMs This board will serve as a reference board for enabling Alder Lake-S support in coreboot. More code and functionalities will be added in subsequent patches as src/soc/alderlake code will be improved for PCH-S. TEST=Extract the microcode from vendor firmware and include it in the build. The platform should print the console on the serial port even without FSP blob. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8 Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-07-04treewide: Unify Google brandingJon Murphy
Branding changes to unify and update Chrome OS to ChromeOS (removing the space). This CL also includes changing Chromium OS to ChromiumOS as well. BUG=None TEST=N/A Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-05-13nb/intel/gm45: Enable 64bit supportArthur Heymans
This patch does the following: - Allow selecting 64bit from Kconfig - Fix up integer to pointer conversion that gcc complains about - Add a buildtest target in configs Tested on Thinkpad X200: boots fine to the payload Change-Id: Icb9c31a28ee231b87109b19c00ce2f8b48b5aefe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-11src/mainboard/emulation/qemu-power9/*: add QEMU POWER9 mainboardYaroslav Kurlaev
Add initial implementation for booting on QEMU POWER9 emulation. Change-Id: I079c5b9ad564024dd13296ef75c263bdc40c9d39 Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com> Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2022-02-07configs/i440fx: Build-test PARALLEL_MPArthur Heymans
Change-Id: If30d715c5a3b44be2832c96316003dc9d139b53f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59695 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-08configs: Add build test configs for CBFS verificationJulius Werner
Now that CBFS verification is available as an optional feature in menuconfig (CB:59982), we should add build test configs to ensure it doesn't break without notice. One Arm and one x86 board should be good enough for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I530dfd37472e63b80a67badd22a13d54d2c4621b Reviewed-on: https://review.coreboot.org/c/coreboot/+/60467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-12-20configs: Add config for Prodrive HermesAngel Pons
Build-test the configuration Prodrive uses to build coreboot for their Hermes mainboard. Change-Id: I62e79d3143851bf14dfdbe70e60c60f13dd06c3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com>
2021-12-09configs/config.facebook_fbg1701: Remove CONFIG_ONBOARD_SAMSUNG_MEMFrans Hendriks
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory. CPLD is used to determine the memory type leaving CONFIG_ONBOARD_SAMSUNG_MEM unused. Remove this config. BUG = N/A TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4 Change-Id: I60626552f2e2338cf5cbaaf4dca1b1eb2756d8df Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59755 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-04configs/config.google_meep_cros: don't select ADD_FSP_BINARIESFelix Held
This config selected ADD_FSP_BINARIES even though HAVE_INTEL_FSP_REPO is only defined for Apollolake and not Geminilake that resides in the same SoC directory and uses the same Kconfig file. This results in the paths to the FSP binaries not being defined, in which case the ADD_FSP_BINARIES option shouldn't be selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95123c4930b44a3b76c87768e130eb7359bbf625 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-08-22AGESA f15tn: Fix building IDS tracing supportAngel Pons
Also add a config file to ensure the code gets build-tested. Change-Id: I530eccd2a194bc79de5ee354d98260d93423cd5b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53986 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-07configs: Explicitly specify vendor and mainboardAngel Pons
Relying on the implicit defaults for these settings can cause issues in the future. For example, commit 8cc4c5a1e76c0c8aee3a14618c15d38e3bd2bd61 (config.dell_optiplex_9010_sff: Specify board model) was done to prevent a build failure when adding support for other Dell mainboards which make the default board change. Change-Id: Ie0da6254def8b38e9fb053fc7d530dfb46760861 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56079 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-06configs/config.foxconn_g41m: Build test with X86_64Arthur Heymans
Change-Id: I755f2037bc9368e610eb97a2633aa66da7f626b0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56042 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05configs: Build test x86_64 on Sandy BridgePatrick Rudolph
Add defconfig to build test x86_64 code on Sandy Bridge. Change-Id: I2c18af8bfa87636c68741e4759059276c287d052 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrik Tesarik <depate@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-07-02src: Consolidate x86_64 support KconfigAngel Pons
Introduce `USE_EXP_X86_64_SUPPORT` in `src/arch/x86/Kconfig` and guard it with `HAVE_EXP_X86_64_SUPPORT`. Replace the per-CPU implementations of the same functionality with the newly-added Kconfig options. Update documentation and the config file for QEMU accordingly. Change-Id: I550216fd2a8323342d6b605306b0b95ffd5dcd1c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-28security/intel/cbnt: Build test CBnT provisioningArthur Heymans
This updates the intel-sec-tools submodule pointer to include a fake acm binary to be included for buildtesting. Change-Id: Id4a9e177f71306b8c5538a578da229a53d19487a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-14soc/intel/broadwell: Re-do SerialIO UART console supportAngel Pons
Use the same code from Lynx Point on Broadwell, and adjust as needed. Also add a config file to ensure the code gets build-tested. Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works. Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-09sb/intel/lynxpoint: Add SerialIO UART console supportAngel Pons
Derived from Broadwell and adapted to follow what soc/intel does. Note that SERIALIO_UART_CONSOLE is meant to be selected from the mainboards which expose a SerialIO UART. UART_FOR_CONSOLE also needs to be set in mainboard Kconfig accordingly. It is possible that some of the UART configuration steps in bootblock are unnecessary. However, some of the steps turn off power management features and others are undocumented: omitting them could cause weird issues. Finally, add a config file to ensure the code gets build-tested. Tested on out-of-tree Compal LA-A992P, SerialIO UART 0 can be used to receive coreboot and SeaBIOS logs. Change-Id: Ifb3460dd50ed03421a38f03c80f91ae9fd604022 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52489 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-09config.dell_optiplex_9010_sff: Specify board modelAngel Pons
Add `CONFIG_BOARD_DELL_OPTIPLEX_9010=y` to avoid issues when other Dell mainboards get added. Change-Id: Ice2073a3073a345aeb9ead7398cb4129453dd5ba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-06-01configs: Update configs for OCP Delta Lake LinuxBoot payloadJohnny Lin
OCP Delta Lake is developed and validated against LinuxBoot payload. Need to put the respective binary blobs in site-local/deltalake to build the final coreboot image. Add LINUX_COMMAND_LINE for LinuxBoot payload kernel cmdline, CPU_UCODE_BINARIES for CPU microcode binary, CONSOLE_SERIAL_57600 is the serial baud rate used by OCP Delta Lake, DEFAULT_CONSOLE_LOGLEVEL_4 is for a faster boot time. Tested=On OCP Delta Lake it can boot up target CentOS 8 GNU/Linux OS. Change-Id: Ib494e4170a7ebb445d9e11df83c370b40a9e5194 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55058 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27tpm: Remove USER_TPMx options, make TPM1/TPM2 menuconfig visibleJulius Werner
We would like to have an easy way to completely disable TPM support on a board. For boards that don't pre-select a TPM protocol via the MAINBOARD_HAS_TPMx options, this is already possible with the USER_NO_TPM option. In order to make this available for all boards, this patch just removes the whole USER_TPMx option group and directly makes the TPM1 and TPM2 options visible to menuconfig. The MAINBOARD_HAS_TPMx options can still be used to select defaults and to prevent selection of a protocol that the TPM is known to not support, but the NO_TPM option always remains available. Also fix some mainboards that selected TPM2 directly, which they're not supposed to do (that's what MAINBOARD_HAS_TPM2 is for), and add a missing dependency to TPM_CR50 so it is set correctly for a NO_TPM scenario. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib0a73da3c42fa4e8deffecb53f29ee38cbb51a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-04-19cpu/x86/smm: Drop the V1 smmloaderArthur Heymans
Change-Id: I536a104428ae86e82977f2510b9e76715398b442 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-24mb/system76/gaze15: Add System76 Gazelle 15Tim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not working: - Discrete/Hybrid graphics This requires a new driver to work correctly, which will be added and enabled later. Change-Id: I10667fa26ac7c4b8eb67da11f3e963062bd0db47 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47822 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19configs: Build-test QEMU i440fx with AddressSanitizer (ASan)Paul Menzel
The artifacts can then be run on test system. Change-Id: I2300af7b9be5fbb42a874566971854b93292885e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51293 Reviewed-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-18cpu/qemu-x86: Add an option to use the smmloader v2Arthur Heymans
The idea is to get rid of having 2 different smmloaders so add this option only to qemu/q35 to get it buildtested. Change-Id: Id4901784c4044e945b7f258b3acdc8d549665f3a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51525 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03configs/config.google_volteer.build_test_purposes: Add fileAngel Pons
This is meant to build-test Crashlog and various debug options. Change-Id: Ie9bbfa538e38a4d835c1f8b0d45feb2f0fe803f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Francois Toguo Fotso <francois.toguo.fotso@intel.com>
2021-02-22configs/config.asrock_b85m_pro4...: Build-test ASanAngel Pons
This build-tests ASan support for both romstage and ramstage, because the Haswell northbridge selects the HAVE_ASAN_IN_ROMSTAGE option. x86 Kconfig selects the HAVE_ASAN_IN_RAMSTAGE option, and Haswell is x86. Change-Id: I892881d2315c09aa6d9d80903a8399d0f4d648e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-22Document Gigabyte GA-G41M-ES2LAlexey Vazhnov
To replace wiki page https://www.coreboot.org/Board:gigabyte/ga-g41m-es2l + configs/config.gigabyte_ga-g41m-es2l + lshw output examples + memory modules compatibility Tested in Devuan 4 Chimaera. Tested from exact steps from this documentation. Change-Id: Ib45cfea15b43d7399e9d209f7ba7c6b24fe860dd Signed-off-by: Alexey Vazhnov <vazhnov@boot-keys.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
2021-01-28mb/system76/oryp5: Add System76 Oryx Pro 5Tim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics - Internal microphone - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux and Windows Not working: - Discrete/Hybrid graphics - Internal speakers These two require new drivers to work correctly, which will be added and enabled later. Change-Id: Iae6e530dcd52df3642cdfe74b65bfff5aa0dd402 Signed-off-by: Tim Crawford <tcrawford@system76.com> Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-28arch/x86: Remove most C_ENV_BOOTBLOCK_SIZE limitsKyösti Mälkki
With top-aligned bootblock this is no longer globally needed. The default maximum is now a generous 256 KiB with couple platforms having lower limits of 32 KiB and 64 KiB. Change-Id: Ib1aee44908c0dcbc17978d3ee53bd05a6200410c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-14configs: Add a weird config for Asus P8Z77-V LX2Angel Pons
This is not meant for actual use, but to build-test several options. Please do not try to use it on real hardware. Or maybe do try. The purpose of this config is to build-test the individual options, not their combination. So, for instance, if it would be hard to keep options x, y and z build together in the future, this config shouldn't block a change but should instead be adapted, e.g. split into multiple chunks. Change-Id: I80e8fe3982025b61148e7c2b05dd0727d65ee2f4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-20configs: Add a sample config for scaleway tagadaJulien Viard de Galbert
Signed-off-by: Julien Viard de Galbert <julien@vdg.name> Change-Id: I39fd9aabe7285d39e1883622ee9d6a60c6651b6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-03configs: Add a weird config for Portwell M107Angel Pons
This is not meant for actual use, but to build-test several options. Please do not try to use it on real hardware. Or maybe do try. The purpose of this config is to build-test the individual options, not their combination. So, for instance, if it would be hard to keep options x, y and z build together in the future, this config shouldn't block a change but should instead be adapted, e.g. split into multiple chunks. Change-Id: Ife40d055e4c9b295c54cfc6a27af06e9358f7761 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45974 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03configs/config.asrock_b85m_pro4...: Select X86_SMM_LOADER_VERSION2Angel Pons
This allows build-testing the code while it isn't used anywhere. Change-Id: I754c661fbad0bc5fbddfab9747607e664ad1e2b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44174 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03configs/config.asrock_b85m_pro4...: Clarify its purposeAngel Pons
The purpose of this config is to build-test the individual options, not their combination. So, for instance, if it would be hard to keep options x, y and z build together in the future, this config shouldn't block a change but should instead be adapted, e.g. split into multiple chunks. Change-Id: Ibd8f6513fae6cd02fcf889d2510dc7e0a97ce40c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47068 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-22configs: Add TXT-enabled config for Asrock B85M Pro4Angel Pons
This config selects the necessary options to enable Intel TXT on the Asrock B85M Pro4, and allows the code to be build-tested. Note that the current TXT code will not work, as it was written for Broadwell-DE. Subsequent commits will adapt the code as necessary to work on Haswell. Compatible BIOS and SINIT ACMs can be retrieved from a firmware update for the Supermicro X10SLH. As they are not in the blobs repository, use the STM binary as a placeholder so as to allow build-testing the code. Change-Id: Ibf8db5fdfac5b527520023277c6370f6efa71717 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46489 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-26mb/emulation/qemu-i440fx: Remove TRACE=y from test buildKyösti Mälkki
Looks like the option is generally not compatible with garbage collections. Nothing is inlined, is_smp_boot() no longer evaluates to constant false and thus the symbols from secondary.S would need to be present for the build to pass after we set SMP=n. Change-Id: I1b76dc34b5f39d8988368f71a0a2f43d1bc4177e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43817 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19configs: Build test experimental x86_64 codePatrick Rudolph
Add additional build config to test qemu-i440fx x86_64 code. Change-Id: I63f7a6e1602728e4d5ff67f9bd702efebe315c16 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-07configs/config.asrock_b85m_pro4...: Select GL9763E driverAngel Pons
This allows build-testing the code while it isn't used anywhere. Change-Id: Ib0b78cf874ab28d2b6ed687c1a63bcca3d788d2c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-02configs: Add a weird config for Asrock B85M Pro4Angel Pons
This config is meant to build-test several options, such as SMMSTORE, UBSAN, SIL3114 driver, EM100 support, code coverage and debug options. Please do not try to use it on real hardware. Or maybe do try. Change-Id: I8bc19a1987b405d5a654276050b00b956acbdf36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43977 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-31security/intel/txt: Add Intel TXT supportPhilipp Deppenwiese
Add TXT ramstage driver: * Show startup errors * Check for TXT reset * Check for Secrets-in-memory * Add assembly for GETSEC instruction * Check platform state if GETSEC instruction is supported * Configure TXT memory regions * Lock TXT * Protect TSEG using DMA protected regions * Place SINIT ACM * Print information about ACMs Extend the `security_clear_dram_request()` function: * Clear all DRAM if secrets are in memory Add a config so that the code gets build-tested. Since BIOS and SINIT ACM binaries are not available, use the STM binary as a placeholder. Tested on OCP Wedge100s and Facebook Watson * Able to enter a Measured Launch Environment using SINIT ACM and TBOOT * Secrets in Memory bit is set on ungraceful shutdown * Memory is cleared after ungraceful shutdown Change-Id: Iaf4be7f016cc12d3971e1e1fe171e6665e44c284 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-07-21configs/config.stm: Correct config file nameAngel Pons
Otherwise, Jenkins doesn't pick up the file, and STM doesn't get build-tested. Change-Id: I7cf23c8352f82b2672c7ff25efba0057b8e059cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-07-04drivers/pc80/tpm: Remove LPC_TPMKyösti Mälkki
Replace uses with MAINBOARD_HAS_LPC_TPM, if drivers/pc80/tpm is present in devicetree.cb it is necessary to always include the driver in the build. Change-Id: I9ab921ab70f7b527a52fbf5f775aa063d9a706ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-06-22mb/ocp/deltalake: Add OCP Delta Lake mainboardJonathan Zhang
OCP Delta Lake server is a one socket server platform powered by Intel Cooper Lake Scalable Processor. The Delta Lake server is a blade of OCP Yosemite V3 multi-host sled. TESTED=Successfully booted on both YV3 config A Delta Lake server and config C Delta Lake server. The coreboot payload is Linux kernel plus u-root as initramfs. Below are the logs of ssh'ing into a config C deltalake server: jonzhang@devvm2573:~$ ssh yv3-cth root@ip's password: Last login: Mon Apr 20 21:56:51 2020 from [root@dhcp-100-96-192-156 ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 52 On-line CPU(s) list: 0-51 ... [root@dhcp-100-96-192-156 ~]# cbmem 34 entries total: 0:1st timestamp 28,621,996 40:device configuration 178,835,602 (150,213,605) ... Total Time: 135,276,123,874,479,544 [root@dhcp-100-96-192-156 ~]# cat /proc/cmdline root=UUID=f0fc52f2-e8b8-40f8-ac42-84c9f838394c ro crashkernel=auto selinux=0 console=ttyS1,57600n1 LANG=en_US.UTF-8 earlyprintk=serial,ttyS0,57600 earlyprintk=uart8250,io,0x2f8,57600n1 console=ttyS0,57600n1 loglevel=7 systemd.log_level=debug Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: I0a5234d483e4ddea1cd37643b41f6aba65729c8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-05-16mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF supportMichał Żygowski
Based on the autoport. The OptiPlex 9010 comes in four different sizes: MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly different, but they are designed with intercompatibility in mind. With small devicetree overrides it should work on OptiPlex 7010 and other OptiPlex 9010 variants as well. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-22configs/config.facebook_fbg1701: Rename fileFrans Hendriks
Jenkins does not build using .config.facebook_fbg1701 on new patches. Rename the config file adding '.mboot_vboot'. Now FACEBOOK_FBG1701 and FACEBOOK_FBG1701_MBOOT_VBOOT are included in Jenkins test result. BUG=N/A TEST=Build and boot Facebook fbg1701 Change-Id: Ib54cc29e7ff34553c19fa3502872d6e7aee5fbe8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40557 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20drivers/pc80/rtc: Drop CMOS_POST_EXTRA optionKyösti Mälkki
Change-Id: I379a5664776624600ff1c2919bffa77c877d87ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-17configs: Add qemu aarch64 target with FIT supportPatrick Rudolph
Add a defconfig which allows to place a large uImage/FIT payload in it to boot test the binary on qemu-system-aarch64 using u-root and kexec-tools. Change-Id: I95ca187b68ff883152421bd7612b494cd63e8d02 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-04-05fsp2_0: Clean up around `config FSP_USE_REPO`Nico Huber
We can make our lifes much easier by removing its dependency on `ADD_FSP_BINARIES`. Instead, we imply the latter if the repository is to be used. We can also hide a lot of unnecessary prompts in this case. Also, remove default overrides and selects for the two that are now unnecessary. Change-Id: I8538f2e966adc9da0fbea2250c954d86e42dfeb3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39882 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26configs: Add builder config to create a working Cedar Island CRBAndrey Petrov
Change-Id: I2a2de7ccb96996211c45da3f9ec9bf6f71cc0c89 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-26configs: Add builder Tioga Pass configAndrey Petrov
Add config file that can be used to build a fully working Tioga Pass image. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: Ifff3591ef9fff40117c60e85900bde9c3729bd94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-22configs: Fix Intel RVP11 defconfigPatrick Rudolph
It wasn't picked up by the builder due to wrong file name. Change-Id: Ia31b5d304a0cabd0d578c5ac6181cb1c8ee1c246 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-10mb/libretrend/lt1000: Add Libretrend LT1000 mainboardMichał Żygowski
Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-06mainboard/ocp: Add support for OCP platform TiogaPassJonathan Zhang
OCP platform Tiogapass is a 2-socket server platform, which is based on a chipset including Intel Skylake-SP processors and a Lewisburg PCH. Skylake-SP is a processor in Intel Xeon Scalable Processor family. Following ACPI tables are added: DSDT/SSDT, MADT, FACP, FACS, HPET, MCFG, SLIT, SRAT, DMAR This patchset is tested on a Tiogapass board. It booted with Linux kernel 4.16.0; lscpu command shows all 72 cpus (2 sockets, 18 cores, 2 thread per core); ssh command shows networking is up from Mellanox ConnectX-4 PCIe NIC card. Towards successful gerrit buildbot build, note that: * microcode is in coreboot intel-microcode submodule repo. * IFD binary is included in this patch. * Dummy ME binary is used, as it may take long time for Intel ME binary to be available in public domain. * Fake FSP binary is used, as at this moment the SKX-SP FSP binary is not going to be available in public domain. Known issues (Not intend to address in this initial support for Xeon-SP processors): * c6 state is not supported. * dsdt table is not fully populated, such as processor/socket devices, some PCIe devices. * SMM handlers are not added. Following are some command execution with CentOS booted from local SATA disk: [root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 72 On-line CPU(s) list: 0-71 Thread(s) per core: 2 Core(s) per socket: 18 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz Stepping: 4 CPU MHz: 140.415 BogoMIPS: 4626.46 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-17,36-53 NUMA node1 CPU(s): 18-35,54-71 [root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.23.68.190 netmask 255.255.0.0 broadcast 172.23.255.255 inet6 2620:10d:c082:9063:268a:7ff:fe57:5af0 prefixlen 64 //cut inet6 fe80::268a:7ff:fe57:5af0 prefixlen 64 scopeid 0x20<link> inet6 2620:10d:c082:9063::5d2 prefixlen 128 scopeid 0x0<global> ether 24:8a:07:57:5a:f0 txqueuelen 1000 (Ethernet) RX packets 84249 bytes 6371591 (6.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8418 bytes 748781 (731.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 613 bytes 63906 (62.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 613 bytes 63906 (62.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]# cbmem 36 entries total: // Lines were cut to avoid checkpatch.pl warnings Total Time: 96,243,882,140,175,829 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I29868f03037d1887b90dfb19d15aee83c456edce Reviewed-on: https://review.coreboot.org/c/coreboot/+/38549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-02soc/intel/apollolake: Fix flashconsole, againAngel Pons
This time, it failed to build if measured boot was not enabled. Fix this problem, and make sure flashconsole will not break like that again. Change-Id: I5f5ffd14a3225804524cb0c1518e3d99737e0a93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-02-05security/intel/stm: Add STM supportEugene Myers
This update is a combination of all four of the patches so that the commit can be done without breaking parts of coreboot. This possible breakage is because of the cross-dependencies between the original separate patches would cause failure because of data structure changes. security/intel/stm This directory contains the functions that check and move the STM to the MSEG, create its page tables, and create the BIOS resource list. The STM page tables is a six page region located in the MSEG and are pointed to by the CR3 Offset field in the MSEG header. The initial page tables will identity map all memory between 0-4G. The STM starts in IA32e mode, which requires page tables to exist at startup. The BIOS resource list defines the resources that the SMI Handler is allowed to access. This includes the SMM memory area where the SMI handler resides and other resources such as I/O devices. The STM uses the BIOS resource list to restrict the SMI handler's accesses. The BIOS resource list is currently located in the same area as the SMI handler. This location is shown in the comment section before smm_load_module in smm_module_loader.c Note: The files within security/intel/stm come directly from their Tianocore counterparts. Unnecessary code has been removed and the remaining code has been converted to meet coreboot coding requirements. For more information see: SMI Transfer Monitor (STM) User Guide, Intel Corp., August 2015, Rev 1.0, can be found at firmware.intel.com include/cpu/x86: Addtions to include/cpu/x86 for STM support. cpu/x86: STM Set up - The STM needs to be loaded into the MSEG during BIOS initialization and the SMM Monitor Control MSR be set to indicate that an STM is in the system. cpu/x86/smm: SMI module loader modifications needed to set up the SMM descriptors used by the STM during its initialization Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-01-27configs/asus/p2b: Add build-test for DEBUG_RAM_SETUPKyösti Mälkki
Change-Id: Ie1d0a2ed9aa5c0645fa8400ec9af17be592d3dea Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mainboard/system76: Add System76 Lemur Pro (lemp9)Jeremy Soller
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support in coreboot is developed by System76 and provided as the default firmware option. Testing is done on a pre-production model expected to be identical from a firmware perspective to the production model. Working: - Payload - Tianocore - CPU - Intel i7-10510U - Intel i5-10210U - EC - ITE IT5570E running https://github.com/system76/ec - Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys - Battery - Charger, using AC adapter or USB-C PD - Suspend/resume - Touchpad - GPU - Intel UHD Graphics 620 - GOP driver is recommended, VBT is provided - eDP 14-inch 1920x1080 LCD - HDMI video - USB-C DisplayPort video - Memory - Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD - Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM - Networking - M.2 PCIe/CNVi WiFi/Bluetooth - Sound - Realtek ALC293D - Internal speaker - Internal microphone - Combined headphone/microphone 3.5-mm jack - HDMI audio - USB-C DisplayPort audio - Storage - M.2 PCIe/SATA SSD-1 - M.2 PCIe/SATA SSD-2 - RTS5227S MicroSD card reader - USB - 1280x720 CCD camera - USB 3.1 Gen 2 Type-C (left) - USB 3.1 Gen 2 Type-A (left) - USB 3.1 Gen 1 Type-A (right) Not working: - TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0 are not currently supported by the intel fast_spi driver. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-10configs: Build test flashconsolePatrick Rudolph
Change-Id: I70467862b238f8be62eafb5532ede9882dd2f41a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38174 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHEKyösti Mälkki
If stage cache is enabled, we should not allow S3 resume to load firmware from non-volatile memory. This also adds board reset for failing to load postcar from stage cache. Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-18configs: add config.google_kevin_secdata_mockJulius Werner
This patch adds a BOARD_GOOGLE_KEVIN variant config that enables CONFIG_VBOOT_MOCK_SECDATA. This is to ensure that Jenkins will build the MOCK_SECDATA-specific code at least once, to be sure we don't accidentally break it during refactoring. Change-Id: Ib0ffaccdf4601d6bfb889ae289d1d7df18bed1fd Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37773 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02configs: Jenkins buildtest for FSP_CARPraveen Hodagatta Pranesh
Change-Id: I004fc02bd84b7b8d5c5fb96451e59f143f0fe6d3 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-19configs: add google/meep cros config as regression testPatrick Georgi
This config is a slightly stripped configuration of the Chromium OS configuration used in production. Apparently the bootblock fills up faster than usual on this device, resulting in address overflows. Add this config here so we'll notice early in the future. Change-Id: I3145bba63d32ddb9d00fd98d3cb774bf9ddd69a6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36923 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-08configs/config.facebook_fbg1701: Add config fileFrans Hendriks
Enable vendorcode measured and verified boot. Use VBOOT test key for VENDORCODE_ELTAN_VBOOT_KEY_FILE BUG=N/A TEST=booting Embedded Linux 4.20 kernel on Facebook FBG1701 Change-Id: Ia2cb3bb873b2d5e7e9031e5b249d86605d8e0945 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-05src/Kconfig: Drop unused DEBUG_ACPIElyes HAOUAS
Change-Id: I135f3e6ec5e75df03331c0c46edb0be243af2adb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36498 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04nb/intel/gm45: Build test with VBOOTArthur Heymans
Change-Id: I21d20d7c575833ace02b4b8ed9d5c82750b331c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-27configs: Build test CONFIG_BOOTSPLASHPatrick Rudolph
Change-Id: I306d107720d51c2b378f739f68c31b8642f7354a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35615 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15cpu/x86/smm: Promote smm_memory_map()Kyösti Mälkki
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-06configs: Build test OpenSBIPatrick Rudolph
Build test OpenSBI on qemu-riscv-rv64. Change-Id: I23b9a1b06987d8d8ebb90655162ba4abce1557fa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29configs: Add test-build for up squared with vboot enabledChristian Walter
It would be useful if we have at least one "new" board on which we actually built vboot, in order to notice if something breaks. Change-Id: I16c7867e3f0f4e1f2e6ae3918c30789e39881b85 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-15configs/lenovo: Drop DEBUG_SMM_RELOCATIONKyösti Mälkki
Not implemented for TSEG. Change-Id: I279c546a921c0504cafaddcda855bd6ea3de7f8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-08mb/lenovo/*: Add support for VBOOT on 8MiB devicesPatrick Rudolph
Enable VBOOT support on all devices that have a 8 MiB flash, using a single RW_MAIN_A partition, allowing the use of tianocore payload in both RW_MAIN_A and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT and regular boot * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_A by default Also build test VBOOT on Lenovo T420. Tested on Lenovo T520 using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23configs: Add a target to buildtest the ivybridge mrc.bin bootpathArthur Heymans
Change-Id: Iff15e9586cd3e39850d986582b5943cbb8a184a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-02-11mb/intel/galileo: Drop the FSP1.1 optionArthur Heymans
This board is EOL and has FSP2.0 support, so drop the older version. Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16configs: add sercon port and disable pxe serial console for apu{2,3,4,5}Piotr Król
To avoid mangled characters on serial output from iPXE we have to disable serial from iPXE console. More to that to have correct serial input we have to enable SeaBIOS SERCON option with default configuration. The only limitation of this configs is that apu5 doesn't detect iPXE - that platform is not for public use so it doesn't affect anyone. Change-Id: I124705bd691b3c8dcd9a2636b17c019d02732c5a Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/28616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-20configs: Build test verbose BDK and FIT payload supportPatrick Rudolph
Change-Id: I2075142a0b241222839899e707a1e3d264746432 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-17configs: Add various common non-default mainboardsPatrick Rudolph
Build tests: * Option table * Static option table * Verbose debugging code * Sandy Bridge optional Kconfigs * TPM debugging code * Lenovo Bluetooth on Wifi * Libgfxinit on Sandy Bridge Change-Id: Ib463f578c97a212d0729aa6f54b7b6fba33e0478 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-19configs: add PC Engines apu2 sample configurationPiotr Król
Change-Id: Ia131c8aec1235443465bc017e11f59f38bef76db Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/26118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-04configs: Add intel/harcuvar FSP 2.0 sample configurationMariusz Szafranski
Add Intel Harcuvar CRB FSP 2.0 sample configuration. Change-Id: I60ec6921eca17a910cd1b9f8b0b86a1a1bf9bbea Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/21693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-20configs: Add intel/galileo test configurationsLee Leahy
Add Quark/Galileo configurations to build various test code: * Galileo Gen1 * Galileo Gen2 * Galileo Gen2 + Quark debugging code * Galileo Gen2 + FSP 1.1 debugging code * Galileo Gen2 + FSP 2.0 debugging code * Galileo Gen2 + SD debugging code * Galileo Gen2 + vboot TEST=Build for Galileo Gen1/Gen2 Change-Id: I04358fd9f6a0958b10dad3e01690b0d47e738684 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-20configs/builder: Remove pre-defined VGA bios filePhilipp Deppenwiese
Removes the pre-defined VGA bios file and id because the build system includes every vgabios. Also make the VGA output primary by default Change-Id: I87d52ef2d1e151c6e54beba64316fe9043668158 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-18configs/builder: Add Sandy/Ivy Bridge Thinkpad configurationsPhilipp Deppenwiese
The coreboot builder makes use of the pre defined configuration files by executing abuild with -d option. These configuration files contain a basic configuration. Change-Id: I41470fe7aaa0fdae545ad9d702326a202d0d2312 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-09configs: Add some sample default configuration filesMartin Roth
Test some config options that don't typically get tested. Change-Id: Ie05c99411c8ce6462a6f5502b086ee2b72a4324b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17591 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:09:58 +0000