summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2020-03-06mainboard/ocp: Add support for OCP platform TiogaPassJonathan Zhang
OCP platform Tiogapass is a 2-socket server platform, which is based on a chipset including Intel Skylake-SP processors and a Lewisburg PCH. Skylake-SP is a processor in Intel Xeon Scalable Processor family. Following ACPI tables are added: DSDT/SSDT, MADT, FACP, FACS, HPET, MCFG, SLIT, SRAT, DMAR This patchset is tested on a Tiogapass board. It booted with Linux kernel 4.16.0; lscpu command shows all 72 cpus (2 sockets, 18 cores, 2 thread per core); ssh command shows networking is up from Mellanox ConnectX-4 PCIe NIC card. Towards successful gerrit buildbot build, note that: * microcode is in coreboot intel-microcode submodule repo. * IFD binary is included in this patch. * Dummy ME binary is used, as it may take long time for Intel ME binary to be available in public domain. * Fake FSP binary is used, as at this moment the SKX-SP FSP binary is not going to be available in public domain. Known issues (Not intend to address in this initial support for Xeon-SP processors): * c6 state is not supported. * dsdt table is not fully populated, such as processor/socket devices, some PCIe devices. * SMM handlers are not added. Following are some command execution with CentOS booted from local SATA disk: [root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 72 On-line CPU(s) list: 0-71 Thread(s) per core: 2 Core(s) per socket: 18 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz Stepping: 4 CPU MHz: 140.415 BogoMIPS: 4626.46 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-17,36-53 NUMA node1 CPU(s): 18-35,54-71 [root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.23.68.190 netmask 255.255.0.0 broadcast 172.23.255.255 inet6 2620:10d:c082:9063:268a:7ff:fe57:5af0 prefixlen 64 //cut inet6 fe80::268a:7ff:fe57:5af0 prefixlen 64 scopeid 0x20<link> inet6 2620:10d:c082:9063::5d2 prefixlen 128 scopeid 0x0<global> ether 24:8a:07:57:5a:f0 txqueuelen 1000 (Ethernet) RX packets 84249 bytes 6371591 (6.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8418 bytes 748781 (731.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 613 bytes 63906 (62.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 613 bytes 63906 (62.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]# cbmem 36 entries total: // Lines were cut to avoid checkpatch.pl warnings Total Time: 96,243,882,140,175,829 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I29868f03037d1887b90dfb19d15aee83c456edce Reviewed-on: https://review.coreboot.org/c/coreboot/+/38549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-02soc/intel/apollolake: Fix flashconsole, againAngel Pons
This time, it failed to build if measured boot was not enabled. Fix this problem, and make sure flashconsole will not break like that again. Change-Id: I5f5ffd14a3225804524cb0c1518e3d99737e0a93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-02-05security/intel/stm: Add STM supportEugene Myers
This update is a combination of all four of the patches so that the commit can be done without breaking parts of coreboot. This possible breakage is because of the cross-dependencies between the original separate patches would cause failure because of data structure changes. security/intel/stm This directory contains the functions that check and move the STM to the MSEG, create its page tables, and create the BIOS resource list. The STM page tables is a six page region located in the MSEG and are pointed to by the CR3 Offset field in the MSEG header. The initial page tables will identity map all memory between 0-4G. The STM starts in IA32e mode, which requires page tables to exist at startup. The BIOS resource list defines the resources that the SMI Handler is allowed to access. This includes the SMM memory area where the SMI handler resides and other resources such as I/O devices. The STM uses the BIOS resource list to restrict the SMI handler's accesses. The BIOS resource list is currently located in the same area as the SMI handler. This location is shown in the comment section before smm_load_module in smm_module_loader.c Note: The files within security/intel/stm come directly from their Tianocore counterparts. Unnecessary code has been removed and the remaining code has been converted to meet coreboot coding requirements. For more information see: SMI Transfer Monitor (STM) User Guide, Intel Corp., August 2015, Rev 1.0, can be found at firmware.intel.com include/cpu/x86: Addtions to include/cpu/x86 for STM support. cpu/x86: STM Set up - The STM needs to be loaded into the MSEG during BIOS initialization and the SMM Monitor Control MSR be set to indicate that an STM is in the system. cpu/x86/smm: SMI module loader modifications needed to set up the SMM descriptors used by the STM during its initialization Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-01-27configs/asus/p2b: Add build-test for DEBUG_RAM_SETUPKyösti Mälkki
Change-Id: Ie1d0a2ed9aa5c0645fa8400ec9af17be592d3dea Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mainboard/system76: Add System76 Lemur Pro (lemp9)Jeremy Soller
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support in coreboot is developed by System76 and provided as the default firmware option. Testing is done on a pre-production model expected to be identical from a firmware perspective to the production model. Working: - Payload - Tianocore - CPU - Intel i7-10510U - Intel i5-10210U - EC - ITE IT5570E running https://github.com/system76/ec - Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys - Battery - Charger, using AC adapter or USB-C PD - Suspend/resume - Touchpad - GPU - Intel UHD Graphics 620 - GOP driver is recommended, VBT is provided - eDP 14-inch 1920x1080 LCD - HDMI video - USB-C DisplayPort video - Memory - Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD - Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM - Networking - M.2 PCIe/CNVi WiFi/Bluetooth - Sound - Realtek ALC293D - Internal speaker - Internal microphone - Combined headphone/microphone 3.5-mm jack - HDMI audio - USB-C DisplayPort audio - Storage - M.2 PCIe/SATA SSD-1 - M.2 PCIe/SATA SSD-2 - RTS5227S MicroSD card reader - USB - 1280x720 CCD camera - USB 3.1 Gen 2 Type-C (left) - USB 3.1 Gen 2 Type-A (left) - USB 3.1 Gen 1 Type-A (right) Not working: - TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0 are not currently supported by the intel fast_spi driver. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-10configs: Build test flashconsolePatrick Rudolph
Change-Id: I70467862b238f8be62eafb5532ede9882dd2f41a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38174 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHEKyösti Mälkki
If stage cache is enabled, we should not allow S3 resume to load firmware from non-volatile memory. This also adds board reset for failing to load postcar from stage cache. Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-18configs: add config.google_kevin_secdata_mockJulius Werner
This patch adds a BOARD_GOOGLE_KEVIN variant config that enables CONFIG_VBOOT_MOCK_SECDATA. This is to ensure that Jenkins will build the MOCK_SECDATA-specific code at least once, to be sure we don't accidentally break it during refactoring. Change-Id: Ib0ffaccdf4601d6bfb889ae289d1d7df18bed1fd Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37773 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02configs: Jenkins buildtest for FSP_CARPraveen Hodagatta Pranesh
Change-Id: I004fc02bd84b7b8d5c5fb96451e59f143f0fe6d3 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-19configs: add google/meep cros config as regression testPatrick Georgi
This config is a slightly stripped configuration of the Chromium OS configuration used in production. Apparently the bootblock fills up faster than usual on this device, resulting in address overflows. Add this config here so we'll notice early in the future. Change-Id: I3145bba63d32ddb9d00fd98d3cb774bf9ddd69a6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36923 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-08configs/config.facebook_fbg1701: Add config fileFrans Hendriks
Enable vendorcode measured and verified boot. Use VBOOT test key for VENDORCODE_ELTAN_VBOOT_KEY_FILE BUG=N/A TEST=booting Embedded Linux 4.20 kernel on Facebook FBG1701 Change-Id: Ia2cb3bb873b2d5e7e9031e5b249d86605d8e0945 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-05src/Kconfig: Drop unused DEBUG_ACPIElyes HAOUAS
Change-Id: I135f3e6ec5e75df03331c0c46edb0be243af2adb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36498 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04nb/intel/gm45: Build test with VBOOTArthur Heymans
Change-Id: I21d20d7c575833ace02b4b8ed9d5c82750b331c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-27configs: Build test CONFIG_BOOTSPLASHPatrick Rudolph
Change-Id: I306d107720d51c2b378f739f68c31b8642f7354a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35615 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15cpu/x86/smm: Promote smm_memory_map()Kyösti Mälkki
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-06configs: Build test OpenSBIPatrick Rudolph
Build test OpenSBI on qemu-riscv-rv64. Change-Id: I23b9a1b06987d8d8ebb90655162ba4abce1557fa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29configs: Add test-build for up squared with vboot enabledChristian Walter
It would be useful if we have at least one "new" board on which we actually built vboot, in order to notice if something breaks. Change-Id: I16c7867e3f0f4e1f2e6ae3918c30789e39881b85 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-15configs/lenovo: Drop DEBUG_SMM_RELOCATIONKyösti Mälkki
Not implemented for TSEG. Change-Id: I279c546a921c0504cafaddcda855bd6ea3de7f8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-08mb/lenovo/*: Add support for VBOOT on 8MiB devicesPatrick Rudolph
Enable VBOOT support on all devices that have a 8 MiB flash, using a single RW_MAIN_A partition, allowing the use of tianocore payload in both RW_MAIN_A and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT and regular boot * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_A by default Also build test VBOOT on Lenovo T420. Tested on Lenovo T520 using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-23configs: Add a target to buildtest the ivybridge mrc.bin bootpathArthur Heymans
Change-Id: Iff15e9586cd3e39850d986582b5943cbb8a184a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-02-11mb/intel/galileo: Drop the FSP1.1 optionArthur Heymans
This board is EOL and has FSP2.0 support, so drop the older version. Change-Id: If5297e87c7a7422e1a129a2d8687fc86a5015a77 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16configs: add sercon port and disable pxe serial console for apu{2,3,4,5}Piotr Król
To avoid mangled characters on serial output from iPXE we have to disable serial from iPXE console. More to that to have correct serial input we have to enable SeaBIOS SERCON option with default configuration. The only limitation of this configs is that apu5 doesn't detect iPXE - that platform is not for public use so it doesn't affect anyone. Change-Id: I124705bd691b3c8dcd9a2636b17c019d02732c5a Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/28616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-20configs: Build test verbose BDK and FIT payload supportPatrick Rudolph
Change-Id: I2075142a0b241222839899e707a1e3d264746432 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-17configs: Add various common non-default mainboardsPatrick Rudolph
Build tests: * Option table * Static option table * Verbose debugging code * Sandy Bridge optional Kconfigs * TPM debugging code * Lenovo Bluetooth on Wifi * Libgfxinit on Sandy Bridge Change-Id: Ib463f578c97a212d0729aa6f54b7b6fba33e0478 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-19configs: add PC Engines apu2 sample configurationPiotr Król
Change-Id: Ia131c8aec1235443465bc017e11f59f38bef76db Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/26118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-04configs: Add intel/harcuvar FSP 2.0 sample configurationMariusz Szafranski
Add Intel Harcuvar CRB FSP 2.0 sample configuration. Change-Id: I60ec6921eca17a910cd1b9f8b0b86a1a1bf9bbea Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/21693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-20configs: Add intel/galileo test configurationsLee Leahy
Add Quark/Galileo configurations to build various test code: * Galileo Gen1 * Galileo Gen2 * Galileo Gen2 + Quark debugging code * Galileo Gen2 + FSP 1.1 debugging code * Galileo Gen2 + FSP 2.0 debugging code * Galileo Gen2 + SD debugging code * Galileo Gen2 + vboot TEST=Build for Galileo Gen1/Gen2 Change-Id: I04358fd9f6a0958b10dad3e01690b0d47e738684 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-20configs/builder: Remove pre-defined VGA bios filePhilipp Deppenwiese
Removes the pre-defined VGA bios file and id because the build system includes every vgabios. Also make the VGA output primary by default Change-Id: I87d52ef2d1e151c6e54beba64316fe9043668158 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-18configs/builder: Add Sandy/Ivy Bridge Thinkpad configurationsPhilipp Deppenwiese
The coreboot builder makes use of the pre defined configuration files by executing abuild with -d option. These configuration files contain a basic configuration. Change-Id: I41470fe7aaa0fdae545ad9d702326a202d0d2312 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-09configs: Add some sample default configuration filesMartin Roth
Test some config options that don't typically get tested. Change-Id: Ie05c99411c8ce6462a6f5502b086ee2b72a4324b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17591 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:05:44 +0000