| Age | Commit message (Collapse) | Author |
|---|
|
Clang was already warning about this. Synchronize the behaviour between
both compilers.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3331a7437b17ab5ac97cef94511bb29c020bdff0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75032
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
For compilation units that should be built for all stages that run on
the x86 cores in a newer AMD SoC, but can't be built for verstage on PSP
which is an ARM core, the 'all' target can't be used, since that would
result in the compilation unit also being added to the verstage target
in the verstage on PSP case. In order to not need to add a compilation
unit to the 'bootblock', 'verstage_x86', 'romstage', and 'ramstage'
targets in separate lines in the Makefile, introduce the 'all_x86'
target that adds a file to 'bootblock', 'verstage_x86', 'romstage',
'postcar', and 'ramstage'. The compilation units also need to be added
to the 'postcar' stage which is only present on the pre-Zen SoCs to be
able to also use the 'all_x86' target in common AMD code that is also
used in those pre-Zen SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d0184182b931185990094d0874b49c0b5cb9f7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74150
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On systems that do not provide their own *.fmd (Flashmap) file, we
fall back to a default flashmap file. That file however does not contain
the blobs (ME, GBE ...), that are usually placed below the BIOS Flashmap.
It can therefore easily happen that the placement of the blobs collides
with the placement of the BIOS region (e.g. if CBFS_SIZE is big enough).
The fmaptool can't catch that, since it does not know of the blobs
placement.
This patch basically maps the regions described in the IFD (Intel
Firmware Descriptor) to the default Flashmap.
Test: Build and see that build/fmap.fmd contains all blobs now (on intel
systems that are supported by the ifdtool)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I82cb252fff456773af69943e188480a4998736fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Certain C source files for coreboot stages require fmap_config.h to
be present. When building coreboot using multiple jobs the dependency
is not always satisfied due to race condition and results in make
error. Work around it by adding fmap_config.h to stage C deps.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a70beedf2eb1c018c5ff98163904253f9a87a61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69819
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
If we need to put a CBFS chunk into a specific region, add a line in
any Makefile.inc
regions-for-file-xxx=region_name
TODO:Do a complete binary identical test for all the mainboards.
Change-Id: Ie37a8a9230dc8b8e5664be8806f047afb94fba69
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Get string of hex value of a given number.
Change-Id: I6d3525db19089938897b9d19ad9875bb07e0eecf
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This is to warn if a user add to Makefile a path to nonexistent
directory.
Change-Id: I5a30c3830f30509deaaadc6eaeab0e17bc08565c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70251
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the build failure with 'make -j' where the build
fails at "$(MAKE)... savedefconfig" as that rule doesn't have the
dependency on kconfig/conf.
Normally make takes care of all dependencies, so parallel builds
work well. However if you have recursive make calls, i.e. make
calling make like in these recipes, there is no single make with a
global view of the dependencies anymore, and then multiple "makes"
can try to build the same file concurrently. Adding that explicit
dependency on build/util/kconfig/conf makes sure the recursive make
is only called later when the top-level make already finished
building build/util/kconfig/conf.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id44ab44618b0ddfb3c2472c469499429118bf76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72070
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
When ramstage is loaded asynchronously, as on the skyrim boards, the
faster decompression of LZ4 allows for faster boot times than the
tighter compression of LZMA.
To make this change, the name of the existing ramstage_compression
option needs to be updated.
BUG=b:264409477
TEST=Boot skyrim, look at boot speed
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I27dd1a8def024e0efd466cef9ffd9ca71717486a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71673
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The intention of CB:69710 was that the expanded config file introduced
there would be a strict superset of the old version and could be used in
all the same cases. This is generally true except for a small oversight:
if a boolean Kconfig is `default y`, but was manually set to `n` by the
user, the new `config` file does not include a line for it. Running
`make olddefconfig` on such a file will again introduce the option as
`y`. It turns out that `make olddefconfig` actually parses those
"load-bearing comments" in that case.
This patch fixes the problem by also generating the minimal defconfig
(like before CB:69710), and then just appending the non-comment lines
from the full config that don't appear in it already. This ensures that
any "load-bearing comments" in the defconfig remain in the file and the
result of Kconfig utilities regenerating a full config from there will
again be the same as before CB:69710. In addition, it clearly separates
the "minimal defconfig" part of the file from the rest, making it easy
for people to extract that if they need it; while also keeping all the
config values in one file to make it easy to grep for a certain value.
Also eliminate that random backslash in the recipe that doesn't seem to
have any good reason to exist and was probably a typo to begin with.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I52ba5d20d3536498fae79d529acf7135f97ef1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch creates initial common code structure for board_id
implementation for intel rvp platforms. Board_id helps in
identifying the platform with respect to CHROME_EC and INTEL_EC
(Windows_EC). Changes include
1. Create initial board_id.c and board_id.h
2. Modify the Makefile to include src/ec/intel directory
BUG=b:260654043
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: If133f6a72b8c3e1d8811a11f91e4556beb8c16e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Warn when a definition is using '()' instead of '(void)'.
Use of ‘()’ is considered an old-style definition in C1x standards,
but probably not in C2x.
Change-Id: I734cfffe3e89996ab13e846cc08e13753f24f742
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The coreboot build system automatically adds a `config` file to CBFS
that lists the exact Kconfig configuration that this image was built
with. This is useful to reproduce a build after the fact or to check
whether support for a specific feature is enabled in the image.
However, the file is currently generated using the `savedefconfig`
command to Kconfig, which generates the minimal .config file that is
needed to produce the required config in a coreboot build. This is fine
for reproduction, but bad when you want to check if a certain config was
enabled, since many configs get enabled by default or pulled in through
another config's `select` statement and thus don't show up in the
defconfig.
This patch tries to fix that second use case by instead including the
full .config instead. In order to save some space, we can remove all
comments (e.g. `# CONFIG_XXX is not set`) from the file, which still
makes it easy to test for a specific config (if it's in the file you can
extract the right value, if not you can assume it was set to `n`). We
can also LZMA compress it since this file is never read by firmware
itself and only intended for later re-extraction via cbfstool, which
always has LZMA support included.
On a sample Trogdor device the existing (uncompressed) `config` file
takes up 519 bytes in CBFS, whereas the new (compressed) file after this
patch will take up 1832 bytes -- still a small amount that should
hopefully not break the bank for anyone.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
No boards now have a missing dependency so remove the workaround.
Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add build rules to build amdfwread tool. Also mark this as a dependency
either while building tools or amdfw.rom.
BUG=None
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3fee4e4c77f62bb2840270b3eaaa58b894780d75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66939
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, if for some reason, the file-size command is called on an
empty string, the build will hang waiting for stdin input to cat.
Since wc accepts a file, this cat was unnecessary anyway. Put the file
name in quotes so an empty string will result in calling wc on an
actual null file instead of just leaving the filename blank. This
results in an error, and will probably halt the build.
BUG=214790407
TEST=Build default build.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I3dacf1968ed897a8ebd00f95583c2f254a7fb55a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Firmware is typically delivered as one large binary image that gets
flashed. Since this final image consists of binaries and data from
a vast number of different people and companies, it's hard to
determine what all the small parts included in it are. The goal of
the software bill of materials (SBOM) is to take a firmware image
and make it easy to find out what it consists of and where those
pieces came from. Basically, this answers the question, who supplied
the code that's running on my system right now? For example, buyers
of a system can use an SBOM to perform an automated vulnerability
check or license analysis, both of which can be used to evaluate
risk in a product. Furthermore, one can quickly check to see if the
firmware is subject to a new vulnerability included in one of the
software parts (with the specified version) of the firmware.
Further reference:
https://web.archive.org/web/20220310104905/https://blogs.gnome.org/hughsie/2022/03/10/firmware-software-bill-of-materials/
- Add Makefile.inc to generate and build coswid tags
- Add templates for most payloads, coreboot, intel-microcode,
amd-microcode. intel FSP-S/M/T, EC, BIOS_ACM, SINIT_ACM,
intel ME and compiler (gcc,clang,other)
- Add Kconfig entries to optionally supply a path to CoSWID tags
instead of using the default CoSWID tags
- Add CBFS entry called SBOM to each build via Makefile.inc
- Add goswid utility tool to generate SBOM data
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Icb7481d4903f95d200eddbfed7728fbec51819d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
gcc 12 fails the build with the warning below:
CC romstage/lib/cbfs.o
src/lib/cbfs.c: In function 'switch_to_postram_cache':
src/lib/cbfs.c:31:32: error: comparison between two arrays [-Werror=array-compare]
31 | if (_preram_cbfs_cache != _postram_cbfs_cache)
| ^~
src/lib/cbfs.c:31:32: note: use '&_preram_cbfs_cache[0] != &_postram_cbfs_cache[0]' to compare the addresses
Instead of following gcc’s suggestion, disable the warning for gcc as
requested by Julius [1]:
> Can we just set -Wno-array-compare instead? There's nothing illegal
> about that expression and as we can see in this case, there are
> perfectly reasonable cases where you might want to do something like
> that. On the other hand, I don't really see a realistic scenario where
> this warning could prevent a real problem (anyone who doesn't know
> that array1 == array2 doesn't compare the array elements in C
> shouldn't have any business submitting code to coreboot).
[1]: https://review.coreboot.org/c/coreboot/+/62827/1
Found-by: gcc-12 (Debian 12-20220313-1) 12.0.1 20220314 (experimental) [master r12-7638-g823b3b79cd2]
Found-by: gcc (Debian 12.1.0-7) 12.1.0
Change-Id: I322f7cc57dcca713141bddaaaed9ec034898754d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit 75226bb879837 ("Makefile.inc: Generate master header and pointer
as C structs") may cause objcopy to copy a wrong section of object file
resulting in miscompiled image with missing CBFS master header. This
makes the usage of secondary payloads impossible.
For example a wrong section for CONFIG_ANY_TOOLCHAIN +
objcopy 2.38-slack151 will copy ".note.gnu.property".
This patch constraints the sections to .data and .bss only.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Change-Id: I1b9a73ece7067c9c5100cb294775078f838e263b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of trying to update the submodules, then skipping each update if
git is not present, just don't try to update the submodules at all.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I83ef48a21820c0983e38823331c9ba0fe0fc277f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There is no longer any information printed when updating submodules, so
on the initial build, this can lead to a long delay without explaining
what's going on.
Just add an information line that the submodules are being updated so
that the user can see what's happening.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I987e50b99e39b976bc8367525549153e1eba69cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch adds a new line to `cbfstool print -v` output that records
the overall CBFS verification health of the image. While this info was
already visible from individual fields before, it's nice to have a
one-stop location to see "this is a good image" without having to
carefully parse a lot of output manually.
Also add a few lines to the Makefile that check whether this field is
valid for the final image (it always should be, but hopefully this check
will allow us to catch regressions like the one fixed by CB:64547 sooner
in the future).
BUG=b:233263447
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1b74b01a55b22294556007aaee835d0fdb9e1c63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
With CBFS verification, cbfstool (CB:41121) needs bootblock to be
present in coreboot.pre in order to locate the metadata hash stored in
it. Therefore we have to ensure that bootblock is added to CBFS before
other CBFS files are added.
To solve the problem, create the 'add_bootblock' function, and call it
in the coreboot.pre recipe. Because bootblock.bin is now a prerequisite
of coreboot.pre, it will get built even if CONFIG_BOOTBLOCK_IN_CBFS=n.
BUG=b:233263447
TEST=emerge-guybrush coreboot
TEST=emerge-corsola coreboot chromeos-bootimage
TEST=cbfstool image-kingler.bin print -v
TEST=Kingler booted successfully
BRANCH=none
Change-Id: I385deb8231e44310ee139c3f69f449e75b92b2be
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit 9a8d0a03db (crossgcc: Upgrade IASL from 20211217 to 20220331)
removed this parameter.
Change-Id: Iba062efcabac88edc1f7937b75ea9d5d884b448b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some platforms don't need a top aligned bootblock in cbfs like Intel
APL or modern AMD platforms as the bootblock is loaded differently.
So they don't need the top aligned cbfs bootblock.
To not clutter the main make file move out adding the bootblock.
Change-Id: I4de9d7fedf1ae5a37a3310dd42eb07b44c030930
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This can be done in a separate Makefile target.
Change-Id: I50eae4f00d171d26a221ca969086f4f294fa524b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The makefiles don't like cbfs file names with spaces in them so update
the file name with '_' instead of spaces. To keep the master header at
the top of cbfs, add a placeholder.
This removes the need to handle the cbfs master header in cbfstool.
This functionality will be dropped in a later CL.
On x86 reserve some space in the linker script to add the pointer.
On non-x86 generate a pointer inside a C struct file.
As a bonus this would actually fix the master header pointer mechanism
on Intel/APL as only the bootblock inside IFWI gets memory mapped.
TESTED on thinkpad X201: SeaBIOS correctly finds the cbfs master
header.
Change-Id: I3ba01be7da1f09a8cac287751497c18cda97d293
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There is no easy way to add dependencies to cbfs-structs objects and
fmap_config.h is a generated file. Follow-up commits depend on it being
available so add it in the cbfs-struct makefile function.
Change-Id: I7067ff144d38c1ff058825819419b2a2e7801e17
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Warning for _SRS includes _SRS.
Warning for _DIS includes must have _SRS twice.
Remove requirement _SRS for _SRS is present.
Removed second _SRS for _DIS is present.
BUG=N/A
TEST=Verify correct message on built of facebook FBG1701
Change-Id: I1be740354b159e931e41323aef14e160cc09af19
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>´
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63250
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"REDUNDANT_OFFSET_REMARK" to ignore redundant offset remarks is
not needed any more as it’s included upstream.
Changes: https://acpica.org/node/199
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ice7f9a10051f7f62c53098161fd2f498d724c17d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Some of these targets seem to come from a long time ago. Now just
rm -rf $(obj) is all that is needed for a clean.
Change-Id: Iccc62b3c54ee2a074c25674715403c1457f6aad3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
coreboot.pre doesn't follow the standard Make conventions. It gets
modified by multiple rules, and thus we can't compute the dependencies
correctly. This means we need to manually delete it before starting the
dependency calculations.
i.e., Building firmware with the seabios payload now works correctly.
Fixes: dd6efce934f ("Makefile: Add .SECONDARY")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If5fa3f0b8d314369a044658e452bd75bc7709397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Putting
src/soc/*/common before src/soc/*/*, and
src/superio/common before src/superio/*,(which is already moved but
with duplicated folder "common")
can make the variables in
common Makefile get the expected value before they are used in other
subdirs.
The later "*" also contains "common", which needs to be eliminated by
"filter-out".
Then we can put some common variables from all the subdir Makefile.inc
to the common Makefile.inc to reduce code redundancy.
Change-Id: I99597af22cac6d12aaef348789664cd7db02ba06
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We don't currently have a build target defined for .map files. This
means they can't be used as a dependency. This change splits the .map
creation into its own rule.
BUG=b:221231786
TEST=Build guybrush and verify .map still exists
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1ce21902e97390aa9520670299ef08debf4458db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Intel Lynx Point ASL code is fixed. So don't ignore
"Multiple types (Device object requires either a _HID or _ADR, but not both)"
warning.
Change-Id: Ie9398879a76ad3d36454772a1c23da083af14b59
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Building libgfxinit with Debian’s toolchain – latest test with *gnat-11*
11.2.0-13 from Debian sid/unstable – the build fails with the error
below.
E: Invalid reloc type: 10
E: Unable to create rmodule from 'build/cbfs/fallback/ramstage.debug'.
Debian’s toolchain is built without enabling PIE by default.
So, explicitly pass `-fno-pie` to `ADAFLAGS_common` to be independent
from how the toolchain was built.
TEST=*gnat* 11.2.0-13 successfully. builds
purism/librem_cnl/variants/librem_mini with libgfxint.
With the coreboot toolchain `make BUILD_TIMELESS=1` produces the
same `build/coreboot.rom` for `BOARD_PURISM_LIBREM_MINI_V2=y` on
top of commit 50251400d2 (sb/intel/common/firmware: Reword
me_cleaner warning) with and without the change.
Change-Id: I6661937906d95c130c6099f598d61b21e958fd85
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Inject SPDs into APCB at coreboot build time.
BUG=b:209486191
BRANCH=None
TEST=Boot guybrush and nipperkin with injected APCB
Change-Id: Ib21085855324e0d473dd5e258f35a52bed326901
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will allow us to preload the dsdt.aml file.
BUG=b:179699789
TEST=Build guybrush
| 80 - write tables | 1.564 | 1.08 Δ( -0.48, -0.03%) |
| 85 - finalize chips | 15.483 | 13.543 Δ( -1.94, -0.14%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibf69ecb947811a2eec861018e3ba5f858155f1c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently, git prints out the submodules that are being skipped twice
on many builds. This patch hides that output unless the build is set
to show it with `make V=1`. This is the normal way of showing the extra
information during the build.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7b5c7f1f79dcc88793a9a21f2e92e7accc5de1e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59511
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will enable preloading ramstage. By preloading the file into
cbfs_cache we reduce boot time.
BUG=b:179699789
TEST=Boot guybrush to OS and see 12ms reduction in boot time.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibe12de806449da25bc0033b02fcb97c3384eddc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This change adds a new tool `cse_serger` which can be used to print,
dump and stitch together different components for the CSE region.
BUG=b:189177186
Change-Id: I90dd809b47fd16afdc80e66431312721082496aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds a new tool `cse_fpt` which can be used to print and
dump CSE partitions in Flash Partition Table (FPT) format.
BUG=b:189167923
Change-Id: I93c8d33e9baa327cbdab918a14f2f7a039953be6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds src/soc/* to subdirs before src/soc/*/* to allow
Makefile in src/soc/* to provide any common helpers that will be
useful for any src/soc/*/*. This is done to primarily ensure that the
helpers are defined before being invoked by the SoC Makefile.inc. This
is utilized by Intel CSE stitching mechanism in following changes.
BUG=b:189177580
Change-Id: I91579a87016fdc2b9ca2d798b81969c21c18b4a3
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
New binutils versions automatically resolve references to debug symbol
files and parse their content as well when objdump'ing data. This leads
to multiple mentions of symbols, so deduplicate references.
Change-Id: I5d597399c515904313ba36d7aab9178bc0dade14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
While the gcc(1) driver has the `-nostartfiles` option, ld(1), the
program the coreboot toolchain uses to link the object files, doesn't
have it.
In binutils before 2.36, this option is interpreted as `-n -o
startfiles`, in which the `-o` option is overridden by a later `-o`
option, so only the `-n` option has effect, which is the `--nmagic`
long option of ld(1). So the correct linker option in this place is
`--nmagic`.
It is tested that without `--nmagic`, ld can generate a much bigger
x86_64 romstage, so this option is still needed.
This error is found when trying to update binutils to 2.36 and later
versions, where ld(1) is unable to disambiguate options and reports an
error.
Change-Id: I27dc2209abdc6fec866716a252736c5cf236a347
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This reverts commit d109354c0f1d4b155c60701cd42e632213350d72.
Reason for revert: Breaks libpayload CBFS code when accessing
non-default CBFS.
BUG=b:193093750
Change-Id: Id7f47406e6126f19e1fd6bc9d33c8c9d0cb9450d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The pointer to the header has a x86 top mmaped address even though the
boot medium is not mapped that way. If no pointer is used to find the
header FMAP is needed. If FMAP is used anyway there is no need for a
cbfs master header.
Change-Id: I6d693bdd4ddaf4c9b3cffb4ea9879c761200aca9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add IFITTOOL as a dependency where needed and remove where it is
unneeded.
Change-Id: I88c9fc19cca0c72e80d3218dbcc76b89b04feacf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is already handled in $(prebuild-files).
Change-Id: I648f97198772d30d6d267ab9d6f7fa8d1d5d0e91
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Mainboards with variants may not always use the same cmos.layout file.
Turn the hardcoded path into a Kconfig symbol to allow changing it.
Tested with BUILD_TIMELESS=1: Without including the config file in the
coreboot.rom and with `USE_OPTION_TABLE` selected, building for the Asus
P8H61-M PRO produces an identical coreboot image.
Change-Id: I4cc622dcb70855c06cb8a816c34406f8421180df
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54366
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VSA (Virtual System Architecture) is specific to AMD Geode CPUs, which
are no longer supported in current coreboot. Drop this remnant.
Change-Id: I28bf61cb953e3352b59aa91059341e4de8f84f23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
cmocka is currently ignoring the UPDATED_SUBMODULES flag. Move the
cmocka checkout with the other submodule checkouts.
BUG=none
TEST=Make sure cmocka is not checked out if UPDATED_SUBMODULES=1
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2a1db809368a77d2c0f9c9a796d62555ec476dc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
We use `additional-dirs` for a single `mkdir -p` invocation for all
directiories. I don't see why these two, $(objcbfs) and $(objgenerated),
should be an exception.
Fixes clean builds for targets that don't include the phony `coreboot`
target, e.g. `make qemu`.
Change-Id: I85abaa74cddefd2bd669e2b5c8934352775070fe
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This messes up the bare structs.
Change-Id: I5a13bd9f4b11530a6dd5f572059fed851db44757
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Building with LLVM/clang (`COMPILER_LLVM_CLANG=y`), Debian clang version
11.0.1-2 fails due to unknown warning options.
error: unknown warning option '-Wlogical-op'; did you mean '-Wlong-long'? [-Werror,-Wunknown-warning-option]
error: unknown warning option '-Wduplicated-cond' [-Werror,-Wunknown-warning-option]
As these are GCC specific, only add them, when building with GCC (and
not scan-build).
Fixes: 04e0712f46 ("Treewide: Add some gcc's warning options")
Change-Id: I6190c1f3df97fb0be51f8dab7e1f5f2a033f5d86
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Issue fixed in commit d152837 so don't allow use of _HID and _ADR at same time.
Change-Id: I52beba66230a3542a7039f496b51be0aa4bdcce4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50384
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There seems to be a bug[1] in the GNU linker for the RISC-V architecture
triggered by symbols that are more than 2GB offset from the program
counter. My next patch is introducing symbols like that and stuck on
this problem. The code path that runs into the issue is only taken when
passing the --emit-relocs flag, which is really only needed for building
rmodules. Since RISC-V platforms don't use any rmodules at the moment,
let's disable the flag on RISC-V until the issue can be fixed in the
toolchain.
[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27180
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I784a506034325c0ba937589416acaafbf80080e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49449
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They all operate on that file, so just add it globally.
Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying
the file in some way. When running them in parallel, coreboot.pre can be
read from and written to in parallel which can corrupt the result.
Add a function to create those rules that also adds existing
INTERMEDIATE targets to enforce an order (as established by evaluation
order of Makefile.inc files).
While at it, also add the addition to the PHONY target so we don't
forget it.
BUG=chromium:1154313, b:174585424
TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2
timeout and sercon) and saw that they were executed.
Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When building as part of the coreboot build system, use the same
mechanism as other tools (cbfstool, amdfwtool, ...) so that abuild
builds ifdtool once into sharedutils instead of once per board (while
avoiding other race conditions, too).
Change-Id: I42c7b43cc0859916174d59cba6b62630e70287fd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently, use of the VPD driver to read VPD tables from flash
requires the use of a custom FMAP with one or more VPD regions.
Extend this funtionality to boards using the default FMAP by
creating a dedicated VPD region when the driver is selected.
Test: build qemu target with CONFIG_VPD selected, verify entry
added to build/fmap.fmd.
Change-Id: Ie9e3c7cf11a6337a43223a6037632a4d9c84d988
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Change-Id: If77d59485451c77dcea752bc4fe0dfadba8fec45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48900
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file was being written to the root src directory. It is the only
file being written to src during a normal build, while all others are
being written to $(obj). I added a new variable to allow specifying the
xcompile path. This allows generating a single file if building multiple
boards. I also moved the default location into $(obj) so we don't
pollute the src directory by default.
I also cleaned up the generation of xcompile by removing the unnecessary
eval and NOCOMPILE check.
I also left .xcompile in distclean so it cleans up stale files.
Since .xcompile is written into $(obj), `make clean` will now remove it.
The tegra Makefiles are outside of the normal build process, so I just
updated those Makefiles to point to the default xcompile location of a
normal build. The what-jenkins-does target had to be updated to support
these special targets. We generate an xcompile specifically for these
targets and pass it into the Makefile. Ideally we should get these
targets added to the main build.
BUG=b:112267918
TEST=ran `emerge-grunt coreboot` and `make what-jenkins-does`
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia83f234447b977efa824751c9674154b77d606b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For arch/arm[64], the offsets to board identification strings and
CONFIG_ROM_SIZE inside .id were never really used; it was only a
convenience to have the strings appear near the start of image.
Add the same strings in an uncompressed file in CBFS.
Change-Id: I35d3312336e9c66d657d2ca619cf30fd79e18fd4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47602
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, the option to cache DIMM SPD data in an FMAP region
is closely coupled to a single board (google/hatch) and requires
a custom FMAP to utilize.
Loosen this coupling by introducing a Kconfig option which adds
a correctly sized and aligned RW_SPD_CACHE region to the default FMAP.
Add a Kconfig option for the region name, replacing the existing hard-
coded instance in spd_cache.h. Change the inclusion of spd_cache.c to
use this new Kconfig, rather than the board-specific one currently used.
Lastly, have google/hatch select the new Kconfig when appropriate to
ensure no change in current functionality.
Test: build/boot WYVERN google/hatch variant with default FMAP, verify
FMAP contains RW_SPD_CACHE, verify SPD cache used via cbmem log.
Also tested on an out-of-tree Purism board.
Change-Id: Iee0e7acb01e238d7ed354e3dbab1207903e3a4fc
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48520
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At the moment this was only used for aligning the bootblock to 64
bytes. At the moment this automatically done with
CONFIG_C_ENV_BOOTBLOCK_SIZE.
Change-Id: I0c879119e525b512eebe3f4c5ff9b2f426c6b6ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
When passing $(@) to eval command, $(@) is replaced by empty string,
Also, the $(@) in cbfs-files-processor-struct is a temporary file name,
so we should quote it by an extra '$' or use the arg ($1 or $2)
directly.
For example:
cbfs-files-processor-struct= \
$(eval $(2): $(1) $(obj)/build.h $(KCONFIG_AUTOHEADER); \
# ** $(@) is empty string instead of $(2) **
printf " CC+STRIP $(@) \n"; \
# ** $(1) contains the name of source file **
printf " CC+STRIP $(1) \n"; \
......)
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: Id6a66e25d7dfe8fe6410e517593ed22a438d2f82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48201
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds optional CBFSTOOL_ADD_CMD_OPTIONS that can be used by
arch/SoC/mainboard Makefiles to supply any additional arguments that
need to be passed into cbfstool when using cbfstool add command.
This is useful when platform wants to add these parameters depending
upon some arch/SoC/mainboard specific configs. Immediate use case is
the fast SPI controller on Intel platforms adding arguments for
extended window base and size.
BUG=b:171534504
Change-Id: I2f48bc3f494d9a5da7e99b530a39d6078b4a881c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47884
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like the option is generally not compatible with
garbage collections.
Nothing gets inlined, for example is_smp_boot() no longer
evaluates to constant false and thus the symbols from
secondary.S would need to be present for the build to pass
even if we set SMP=n.
Also the addresses of relocatable ramstage are currently
not normalised on the logs, so util/genprof would be unable
dress those.
Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When the global variable of a "struct" CBFS file is zero (for example,
CB:47696), the binary will appear in the .bss* section in the ELF file
(instead of .data). This results in an empty binary file added to CBFS,
so that file size check will fail when reading it at runtime.
BUG=b:173751635
TEST=emerge-asurada coreboot
TEST=Check sdram-lpddr4x-KMDP6001DA-B425-4GB is non-empty in CBFS
BRANCH=none
Change-Id: Idfd17d10101a948de0eb0522a672afd5c2f83b04
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47903
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This can be done using in the INTERMEDIATE target in the proper place.
Change-Id: I28a7764205e0510be89c131058ec56861a479699
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46453
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The idea is to split the “mainboard” category into “variants” and
“carrierboards”, in the case when we use the COMe module together
with the Carrier Board instead of a single monolithic motherboard.
Previously, the “variants” category defined the type of motherboard,
which has a number of differences from the base one, for example, it
differed in the size or type of memory, and in the configuration of
the interfaces. Thus, there is no need to create a separate directory
in src/mainboard for a board that is similar in configuration to the
base board. But for a COMe module, “variants” contains different
variants of only this module, and the entire Carrier Board configuration
is allocated to a separate category - “carrierboards”, and each of the
variants can be used with one of the many boards in “carrierboards”.
For example, in the case of the Kontron mAL10 COMe module, variant
refers to the COMe-mAL10 or COMe-m4AL10 module type. They differ in the
type of memory (DDR3L or DDR4), and maybe they differ in some chips (see
more in https://www.kontron.com/products). However, all variants contain
the same type of processor/SoC.
The "carrierboards" directory can be able contain both the Kontron's
Evalution carrier boards (such as Eval Carrier2 T10 and COMe
Ref.Carrier-i T10 TNI) and third party vendor backplanes that are
compatible with the COMe modules from “variants”.
Thus, the src/mainboard/<module-name> directory contains the common
configuration code for all variants from src/mainboard/<module-name>/
variants, which can be supplemented/redefined with a configuration from
src/mainboard/<module-name>/carrierboard/<vendor-carrierboard-name>.
This architectural solution will be able to systematize and simplify
understanding of the code structure for COMe modules and will allow
vendors to add/maintain their code in a separate directory.
This work is also the first step towards to union of all carrierboards
into the global category in src/carrierboard on a par with all boards
from src/mainboard.
The patch takes this into account in the build system and adds
CARRIER_DIR component to use the “carrierboards” category, as it has
done for VARIANT_DIR.
TEST = Build ROM image for Kontron mAL10 COMe module together with T10
TNI carrier board (https://review.coreboot.org/c/coreboot/+/39133).
Change-Id: Ic6b2f8994b1293ae6f5bda8c9cc95128ba0abf7a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42609
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using the INTERMEDIATE target this can be done in the proper dir.
Change-Id: Ie105231655ef4b49234f0944f638545fe79f07cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Actual support CBnT will be added later on.
Change-Id: Icc35c5e6c74d002efee43cc05ecc8023e00631e0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add some mechanics to automatically have a `qemu` make target for
supported configurations. So with a QEMU target selected in Kconfig,
one would ideally only have to run `make qemu` to test things.
There are some notable variables that can be set or adapted in
`Makefile.inc` files, the make command line or the environment.
Primarily for `Makefile.inc` use:
QEMU-y the QEMU executable
QEMU_CFG-y a QEMU config that sets the available default devices,
used to run more comprehensive tests by default,
e.g. many more PCI devices
For general use:
QEMU_ARGS additional command line arguments (default: -serial stdio)
QEMU_EXTRA_CFGS additional config files that can add devices
QEMU_CFG_ARGS gathers config file related arguments,
can be used to override a default config (QEMU_CFG-y)
Examples:
$ # Run coreboot's default config with additional command line args
$ make qemu QEMU_ARGS="-cdrom site-local/grml64-small_2018.12.iso"
$ # Force QEMU's built-in config
$ make qemu QEMU_CFG_ARGS=
Change-Id: I658f86e05df416ae09be6d432f9a80f7f71f9f75
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently sconfig generates a `static.h` to accompany
`static.c`. However, some payloads may decide they would like to consume
the FW_CONFIG macros as well. The current state of `static.h` makes this
impossible (relying on `device/device.h`).
This patch splits up `static.h` into 3 files: `static.h,
`static_devices.h`, and `static_fw_config.h`. `static.h` simply includes
the other two `.h` files to ensure no changes are needed to other
code. `static_devices.h` contains the extern'd definitions of the device
names recently introduced to sconfig. `static_fw_config.h` contains the
FW_CONFIG_FIELD_* macros only, which makes it easily consumable by a
payload which wishes to use FW_CONFIG.
Also refactor the generation of all these output files, as the code was
getting messy.
Change-Id: Ie0f4520ee055528c7be84d1d1e2dcea113ea8b5f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The USB4 retimer device needs to declare a _DSM with specific functions
that allow for GPIO control to turn off the power when an external
device is not connected. This driver allows the mainboard to provide
the GPIO that is connected to the power control.
BUG=b:156957424
Change-Id: Icfb85dc3c0885d828aba3855a66109043250ab86
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change extends the devicetree override one more layer and allows
the chipset to provide the base devicetree. This allows the chipset to
assign alias names to devices as well as set default register values.
This works for both the baseboard devicetree.cb as well as variant
overridetree.cb.
chipset.cb:
device pci 15.0 alias i2c0 off end
devicetree.cb:
device ref i2c0 on end
BUG=b:156957424
Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add Makefile.inc to compliant with other tools.
Makefile is kept for building amdfwtool by typing make
in the folder.
Change-Id: I3688d93de4459f5f838955892086b4b9bf30a9b8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of positional arguments switch sconfig to use getopt and pass
the arguments as options in the build system. This will make it easier
to add additional options.
Change-Id: I431633781e80362e086c000b7108191b5b01aa9d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- Use a new variable to store the list of warning types;
- print this list when building an image.
TEST = build image on Kontron mAL-10 COMe module:
IASL 3150 2158 3133 warning types were ignored!
IASL build/dsdt.aml disassembled correctly.
Change-Id: I46f761612254b400563f8567be9bd61601f23467
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
'-Wstrict-aliasing' is turned on by '-Wall'.
'-Wstrict-aliasing' is only active when -fstrict-aliasing is active, so add it.
'BUILD_TIMELESS=1' on gigabyte/ga-945gcm-s2l gives the same binary.
Change-Id: I51eb8241389f13d2659aef0a3b4b376ce9c651cf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44216
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When refactoring, one can move code around quite a bit while preserving
reproducibility, unless there is an assert-style macro somewhere... As
these macros use __FILE__ and __LINE__, just moving them is enough to
change the resulting binary, making timeless builds rather useless.
To improve reproducibility, do not use __FILE__ nor __LINE__ inside the
assert-style macros. Instead, use hardcoded values. Plus, mention that
timeless builds lack such information in place of the file name, so that
grepping for the printed string directs one towards this commit. And for
the immutable line number, we can use 404: line number not found :-)
Change-Id: Id42d7121b6864759c042f8e4e438ee77a8ac0b41
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch adds a separate blobs repository for Qualcomm blobs,
analogous to the existing AMD blobs. Qualcomm's binary licenses allow
files to be redistributed and used by anyone, but they explicitly
require the user to agree to the license terms when just *downloading*
the binary (even if they're not using them to build any firmware). Some
community members do not like to have to agree to licenses for files
they're not actually using, so we are keeping these files separate from
the main blobs repository and adding an extra Kconfig to make sure the
user is aware of and must explicitly agree to this before downloading
these files.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I247746c1b633343064c9f32ef1556000475d6c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
TEST=Building Asrock H110M using FSP from repo updates the submodule.
Change-Id: I25023af88d878353a04db456009249da67e41521
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
This change will add these files to verstage only if the verstage
architecture is X86 - either 32 or 64 bit.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I797b67394825172bd44ad1ee693a0c509289486b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The variable SETUP_XIP_CACHE provides us a working
alternative.
Change-Id: I6e3befedbbc7967b71409640dc81a0c2a9b3e511
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When adding XIP stages on x86, the -P parameter was used to
pass a page size that covers the entire file to add. The same
can now be achieved with --pow2page and we no longer need to
define a static Konfig for the purpose.
TEST: Build asus/p2b and lenovo/x60 with "--pow2page -v -v" and
inspect the generated make.log files. The effective pagesize is
reduced from 64kB to 16kB for asus/p2b giving more freedom
for the stage placement inside CBFS. Pagesize remained at 64kB
for lenovo/x60.
Change-Id: I5891fa2c2bb2d44077f745619162b143d083a6d1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows
SoC/mainboard to provide a linker file for the platform. x86 already
provides a default memlayout.ld under src/arch/x86. With this new
Kconfig variable, it is possible for the SoC/mainboard code for x86 to
provide a custom linker file as well.
Makefile.inc is updated for all architectures to use this new Kconfig
variable instead of assuming memlayout.ld files under a certain
path. All non-x86 boards used memlayout.ld under mainboard
directory. However, a lot of these boards were simply including the
memlayout from SoC. So, this change also updates these mainboards and
SoCs to define the Kconfig as required.
BUG=b:155322763
TEST=Verified that abuild with --timeless option results in the same
coreboot.rom image for all boards.
Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apparently I missed adding this variable definition.
BUG=b:157140753
TEST=Build APCBs with clean tree :)
Fixes: cbaa835f211 ("soc/amd/picasso/Makefile: Use apcb_tool to generate APCBs from SPDs")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia9055ed3507996cbf78687a97599aab3b0b39d6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41738
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a target to the top level Makefile that allows
building sconfig and generating static.c/static.h without building
the rest of coreboot.
It also adds $(DEVICETREE_STATIC_C) to the c-deps for each stage so
the files are generated before the build runs.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4320288422230d8913dfa7cc7b7512775a1a797b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41439
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib78c322730ec6dfa9dcaafa16e5741cd3d351b8d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This change updates FMAP_FMAP_SIZE for non-x86 boards using default
fmd file to be 0x200 just like for x86 boards.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f58696b26fbb5363d67bec4056653da83485776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When using default fmd files, base of the fmap region is currently
calculated based on the size and base of previous fmap regions. Since
the existence of any fmap region is dependent on the selection of
certain CONFIG_* parameters, these calculations get complicated. Every
time base is calculated for a region, there need to be checks to see
which of the previous regions really exist. As the regions in default
fmd file are increased, these calculations and the conditional checks
get even more complicated.
This change introduces a Makefile variable FMAP_CURRENT_BASE which is
updated every time a new region is allocated space. This allows using
the same steps for determining the base of any fmap region
irrespective of the state of previous regions.
The way the code is organized it should be possible in the future to
also add a macro to perform the same steps (in case that is possible).
TEST=Verified that coreboot image generated remains unchanged for x86
and ARM boards using the default fmd files.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I2a109462928b6e8b7930bbcc1a1ba45fa85de6ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since SeaBIOS rel-1.7.5 CONFIG_THREAD_OPTIONROMS is not present in its
config. The threaded hardware initialization during optionrom execution
is now controlled with a CBFS file. Add appropriate integer to CBFS when
threaded hardware initialization is selected in coreboot's Kconfig.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9b5a532b609c6addf31ccdb6be03ff2e937ad326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The dependency for `ifittool` was missing in the CONFIG_UPDATE_IMAGE
case. Which led us to the question: Why run `ifittool` in this case?
The idea of CONFIG_UPDATE_IMAGE is to update everything _but_ the
bootblock.
Change-Id: I7fd3bd1b56f495b16beb1e1f4b35b8cfcf25b2ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39803
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I789c8906542c59477b0037d39e7aa4fb2dcf22c0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
