| Age | Commit message (Collapse) | Author |
|---|
|
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This patch adds the macros __ROMSTAGE__ and __RAMSTAGE__ which get
predefined in their respective stages by make, so that we have one
specific macro for every stage. It also renames __BOOT_BLOCK__ and
__VER_STAGE__ to __BOOTBLOCK__ and __VERSTAGE__ for consistency.
This change is intended to provide finer control and clearer
communication of intent after we added a new (optional) stage that falls
under __PRE_RAM__, and will hopefully provide some robustness for the
future (we don't want to end up always checking for romstage with #if
defined(__PRE_RAM__) && !defined(__BOOT_BLOCK__) &&
!defined(__VER_STAGE__) && !defined(__YET_ANOTHER_PRERAM_STAGE__)). The
__PRE_RAM__ macro stays as it is since many features do in fact need to
differentiate on whether RAM is available. (Some also depend on whether
RAM is available at the end of a stage, in which case #if
!defined(__PRE_RAM__) || defined(__ROMSTAGE__) should now be
authoritative.)
It's unfeasable to change all existing occurences of __PRE_RAM__ that
would be better described with __ROMSTAGE__, so this patch only
demonstratively changes a few obvious ones in core code.
BUG=None
TEST=None (tested together with dependent patch).
Change-Id: I6a06d0f42c27a2feeb778a4acd35dd14bb53f744
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a4ad042746c1d3a7a3bfda422d26e0d3b9f9ae42
Original-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219172
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9304
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This allows combining and simplifying linker scripts.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ie5c11bd8495a399561cefde2f3e8dd300f4feb98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9303
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Drop the inner underscore for consistency. Follows the
commit stated below.
Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172
Reviewed-on: http://review.coreboot.org/9290
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Instead of keeping this separate variable around, add linker scripts
to the $(class)-y source lists and let the build system sort things out.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
So far we assumed that all files in *-srcs are below src/
which wasn't really true actually and will be less true with
future changes.
Fix up crt0.S handling on x86, which is covered by default rules
due to this change.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Icae563c2d545b1aea809406e73faf3b417796a1b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9288
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
It's used for files with custom build rules, eg.
the objcopy stuff surrounding smm and sipi_vector.
Change-Id: Ie9ab4c9c6008ca42f82f768c5f33f90c7f5f4db5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It also creates file names in the build directory and with
the stage sliced in, but keeps the extension for anything
not .c or .S.
Also some handling for non-.c/.S files was adapted to match.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: If8f89a7daffcf51f430b64c3293d2a817ae5120f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9175
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
We don't actually want to see them in the binaries.
Change-Id: I37b53ef7dcbe05d81a8322d528c9aae102115134
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9180
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
It's x86 specific.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Iacb91b47c89041435dd27c2c9ad34a231adf21d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9115
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Introduce generic-$(type)-ccopts and $(class)-generic-ccopts
to declare compiler flags that apply to all files of a certain
type or of a certain class. Then use them.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I655688e82a0cc5bad89b6f55dc217b9f66b64604
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Test that the compilers used for the target are
built by our buildgcc utility. Users can override
this test with the ANY_TOOLCHAIN Kconfig variable.
Change-Id: I24adf2c9b83667fd34ce8eb103327c9376765f6d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9055
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a new utility named bimgtool, a simple tool which generates boot
images in the BIMG format. This is the format the Danube boot ROM
expects the user supplied code to be wrapped in, it is described by
struct bimg_header in the code.
This utility will be used to wrap the coreboot bootblock when building
Danube targets.
BUG=chrome-os-partner:31438
TEST=none yet
Change-Id: I08ddb1b70d0b1feb1ffb3d62c4e5e6f07f4acdb7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7fe6a9f383b79120f9ae231453d4b3a0f85b4fa7
Original-Change-Id: I63b9f5e09cd1f12765317b38e2a0dd033cdd6d39
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8768
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the build infrastructure and basic architectural support required
to build for targets using the MIPS architecture. This is sufficient
to run on a simulator, but will require the addition of some cache
maintenance and timer setup in order to run on real hardware.
BUG=chrome-os-partner:31438, chromium:409082
TEST=none yet
Change-Id: I027902d8408e419b626d0aab7768bc564bd49047
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcc0d934d7223922c878b1f87021cb5c2d7e6f21
Original-Change-Id: If4f99554463bd3760fc142477440326fd16c67cc
Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207972
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8760
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Garbage collected sections allow for trimming the size of the
binaries as well as allowing for not needing to config off
unused functions. To that end, on a rambi build the following
differences are observed:
$ diff -up \
<(readelf -l coreboot-builds/google_rambi/cbfs/fallback/ramstage.elf) \
<(readelf -l coreboot-builds/google_rambi_gc_sections/cbfs/fallback/ramstage.elf)
--- /dev/fd/63 2015-03-10 12:07:27.927985430 -0500
+++ /dev/fd/62 2015-03-10 12:07:27.927985430 -0500
@@ -6,9 +6,9 @@ There are 4 program headers, starting at
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg
Align
LOAD 0x001000 0x00000000 0x00000000 0x00040 0x00040 RWE 0
- LOAD 0x001040 0x00000040 0x00000040 0x34560 0x34560 RWE 0
- LOAD 0x0355a0 0x000345a0 0x000345a0 0x02578 0x02578 RWE 0
- LOAD 0x037b18 0x00036b18 0x00036b18 0x00000 0x0b560 0
+ LOAD 0x001040 0x00000040 0x00000040 0x2cbf8 0x2cbf8 RWE 0
+ LOAD 0x02dc38 0x0002cc38 0x0002cc38 0x02208 0x02208 RWE 0
+ LOAD 0x02fe40 0x0002ee40 0x0002ee40 0x00000 0x0a888 0
Section to Segment mapping:
Segment Sections...
$ diff -up \
<(readelf -l coreboot-builds/google_rambi/cbfs/fallback/romstage.elf) \
<(readelf -l coreboot-builds/google_rambi_gc_sections/cbfs/fallback/romstage.elf)
--- /dev/fd/63 2015-03-10 12:08:16.855985880 -0500
+++ /dev/fd/62 2015-03-10 12:08:16.851985880 -0500
@@ -5,8 +5,8 @@ There are 1 program headers, starting at
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg
Align
- LOAD 0x000060 0xfff20000 0xfff20000 0x08b81 0x08b81 R E
0x10
+ LOAD 0x000060 0xfff20000 0xfff20000 0x06300 0x06300 R E
0x10
Section to Segment mapping:
Segment Sections...
- 00 .rom .text
+ 00 .rom
The following warnings needed to be applied to CFLAGS_common because for
some reason gcc was miraculously emitting the warnings with the
unrelated *-sections options:
-Wno-unused-but-set-variable
Change-Id: I210784fdfc273ce4cb9927352cbd5a51be3c6929
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8635
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
From GCC's documentation:
Optimize debugging experience. -Og enables optimizations that do not interfere
with debugging. It should be the optimization level of choice for the standard
edit-compile-debug cycle, offering a reasonable level of optimization while
maintaining fast compilation and a good debugging experience.
Change-Id: I9a3dadbf8e894cb28e29d7b2f4e9add252e7bbb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/8689
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
You can build your new toolchain with:
$ cd util/crossgcc/
$ ./buildgcc -d /opt/cross -p x86_64-elf -j 16
or
$ make crossgcc-x64
Change-Id: I8eb584166294578d2b33c63e94ed3aca9b5de4f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8668
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If1e0f7ed21f67d7a185dad251ede81ddbc18c4e5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8629
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Moving the routines that create build.h into a script offers
several advantages. We can create more complex functions to
run and we don't have to deal with both bash and Make at the same
time.
This script combines what is currently in Makefile.inc with a
couple of updates.
- Update how it determines whether to use git for the timestamp
- Move the git revision string generation inside the routine
that checks to see if we have git.
- Add a timeout for the domain name check.
Change-Id: I93c131e8d01a0099eb13db720fa865c627985750
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8428
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A bit crude test, but before we would have _created_ .git
and confused later git presence tests.
Change-Id: Iec882d0e38ce1bd227cae8c1e541fb21be085290
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8601
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
And then use the variable to decide what to do.
Change-Id: I48a801ecdbf774c4a8b64d7efaf9cf0ef2c2d438
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8600
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change just adds a check to verify that the build is happening
inside a git repo and that git is a valid command before trying
to update the submodules.
Use 'command -v' instead of 'which' to stay portable.
Change-Id: Idfa27645c3dbfd684f90002ecb01626d71eacc8f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7fae2e9c417a7880bfa28739afa6020820fcd360
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It only built i386-elf
Change-Id: I02f94d12297901136e1c17c63bbeb103c1d93e8d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
coverity isn't too happy with ccache, and given the current setup
it also isn't too useful.
Change-Id: I420fdd7350dff29296d7101569cb183afe1f92d6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8478
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e
and fixes the build issue that cuased it to be reverted.
Verstage will host vboot2 for firmware verification.
It's a stage in the sense that it has its own set of toolchains,
compiler flags,
and includes. This allows us to easily add object files as needed. But
it's directly linked to bootblock. This allows us to avoid code
duplication for stage loading and jumping (e.g. cbfs driver) for the
boards
where bootblock has to run in a different architecture (e.g. Tegra124).
To avoid name space conflict, verstage symbols are prefixed with
verstage_.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac
Original-Reviewed-on: https://chromium-review.googlesource.com/204376
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf
Reviewed-on: http://review.coreboot.org/8224
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reverts commit 320647abdad1ea6cdceb834933507677020ea388, because it
introduced the following regression.
$ LANG=C make V=1
Warning: no suitable GCC for arm.
Warning: no suitable GCC for aarch64.
Warning: no suitable GCC for riscv.
/bin/sh: --: invalid option
Usage: /bin/sh [GNU long option] [option] ...
/bin/sh [GNU long option] [option] script-file ...
GNU long options:
--debug
--debugger
--dump-po-strings
--dump-strings
--help
--init-file
--login
--noediting
--noprofile
--norc
--posix
--rcfile
--restricted
--verbose
--version
Shell options:
-ilrsD or -c command or -O shopt_option (invocation only)
-abefhkmnptuvxBCHP or -o option
make: -print-libgcc-file-name: Command not found
It also introduced trailing whitespace.
Change-Id: I50ec00a38e24c854fa926357cd24f9286bf4f66f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8223
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Verstage will host vboot2 for firmware verification.
It's a stage in the sense that it has its own set of toolchains, compiler flags,
and includes. This allows us to easily add object files as needed. But
it's directly linked to bootblock. This allows us to avoid code
duplication for stage loading and jumping (e.g. cbfs driver) for the boards
where bootblock has to run in a different architecture (e.g. Tegra124).
To avoid name space conflict, verstage symbols are prefixed with verstage_.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac
Original-Reviewed-on: https://chromium-review.googlesource.com/204376
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I42b2b3854a24ef6cda2316eb741ca379f41516e0
Reviewed-on: http://review.coreboot.org/8159
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Regression in commit 88ca81a caused UPDATE-FIT step to no longer run when
microcode was added to CBFS.
Change-Id: I6ea4b6b6a8de598be810c930baa497f8c7fdc4b8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7959
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Commit 5839635a broke cbfs file-position, probably resulting with
non-booting Intel platforms using mrc.bin and the risk of AGESA
with HAVE_ACPI_RESUME corrupting cbfs as s3nv.bin was not properly
located.
Change-Id: I6ca7a3cdf8dfe40bf47da6c6071ef7b1f42a32b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7920
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Just set $(filename)-align to the desired alignment,
and the build system will figure it out using
cbfstool locate.
Change-Id: I44369d947888041c21ff51ae49f9aacf510918a0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7728
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
It seriously miscomputed alignment values, always
off-by-one, and off-by-an-alignment for aligned
values.
Change-Id: Ide3477d09d34d7728cb0666bb30dd9f7a3f1056d
Reported-by: Dave Frodin <dave.frodin@se-eng.com>
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7635
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
No need to keep that just because x86 has one
extra linking step.
Change-Id: Iffdbf64e0613f89070ed0dfb009379f5ca0bd3c1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7611
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Works in the RISCV version of QEMU.
Note that the lzmadecode is so unclean that it needs a lot of work.
A cleanup is in progress.
We decided in Prague to do this as one thing, because it forms a nice case study
of the bare minimum you need to add to get a new architecture going in qemu.
Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7584
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
There isn't a history of broken clang compilers yet
so let's give it a chance.
Change-Id: Iddb63700e3850116313c1ddee69111f936191055
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7607
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Rather than hunting version across compile tree in board_status,
export it by coreboot itself.
Change-Id: I7f055e6fc077134001ebdb11df7381bbdc71a1fc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6747
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This adds the crosstools-aarch64 and crossgcc-aarch64
make rules to create a toolchain (with or without gdb)
for AArch64 targets.
Also adapt xcompile, since it's aarch64-elf.
Change-Id: I6fbe09d44ee8b8493d3cd8dbbba869b409e311f7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7527
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
There are too many differences, and calculating relatively
large integer using floats might not be the brightest idea
anyway.
Also avoid relying on ls(1) output format to determine file sizes.
Change-Id: I5f96c036737b74e20f525c3dc9edc011ad403662
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7447
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The ccopts mechanism is needed for passing ARM assembler flags to GCC.
There are many gotchas in adding ASFLAGS. As things have moved
around, the revert doesn't remove cleanly, so this reverts and cleans
up the ccopts.
This reverts commit 25b56c3af514faa8a730d56fe14cae4960ac83aa.
Change-Id: I44c025535258e6afb05a814123c10c24775a88e8
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7352
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also document the unusual git feature we employ for 3rdparty
Change-Id: I1d1c986f9d1c4dd8db687d746dbdeb510679141a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7243
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1508f3d3c56cb9afbf4a23355831549552a62866
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6891
Tested-by: build bot (Jenkins)
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
When preparing an image for source level debugging, it is convenient
to be able to compile some modules with -O0, which makes it much
easier to follow the execution flow.
This patch allows to do it by defining GDB_DEBUG=1 in the environment
before invoking make. Adding this feature as a common config flag is
problematic, because we don't want to compile the entire image with
-O0.
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/196359
(cherry picked from commit dde4928c045d12e502cb109015a710cd9fdf2a04)
Changed from CFLAGS to CFLAGS_common.
Change-Id: Ie0be653509509eeb64ea3a7229f54c0c812840a9
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7005
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
It brings in useless dependencies, a weird autotools
configuration, and tons of pain everywhere.
Instead just build things ourselves.
Change-Id: I67f06e711cb9dcd594363bc1a4f99d3273074549
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6986
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add support for enabling different coreboot stages (bootblock, romstage and
ramstage) to have arm64 architecture. Most of the files have been copied over
from arm/ or arm64-generic work.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197397
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 033ba96516805502673ac7404bc97e6ce4e2a934)
This patch is essentially a squash of aarch64 changes made by
these patches:
d955885 coreboot: Rename coreboot_ram stage to ramstage
a492761 cbmem console: Locate the preram console with a symbol instead of a sect
96e7f0e aarch64: Enable early icache and migrate SCTLR from EL3
3f854dc aarch64: Pass coreboot table in jmp_to_elf_entry
ab3ecaf aarch64/foundation-armv8: Set up RAM area and enter ramstage
25fd2e9 aarch64: Remove CAR definitions from early_variables.h
65bf77d aarch64/foundation-armv8: Enable DYNAMIC_CBMEM
9484873 aarch64: Change default exception level to EL2
7a152c3 aarch64: Fix formatting of exception registers dump
6946464 aarch64: Implement basic exception handling
c732a9d aarch64/foundation-armv8: Basic bootblock implementation
3bc412c aarch64: Comment out some parts of code to allow build
ab5be71 Add initial aarch64 support
The ramstage support is the only portion that has been tested
on actual hardware. Bootblock and romstage support may require
modifications to run on hardware.
Change-Id: Icd59bec55c963a471a50e30972a8092e4c9d2fb2
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6915
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add rules for building the nvidia-cbootimage utility and add dependencies
to the tegra124 platform.
Change-Id: Ia9f26981bccd217fe79e1b5dd432ee7da868d22a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6851
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
This reduces disk use and simplifies using abuild on
a ramdisk.
Change-Id: I3fb8d273dcbb5008fa9cfaa9465a59e3bbcb974b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This target does (pretty much) exactly the same what jenkins
is doing on our build nodes:
- complete abuild run of our tree with a given payload
- building all libpayload configs we ship
- building the cbmem utility
In fact at some point we could tell jenkins to just run this command.
For debugging, pass along V and Q variables so inner make processes
are slightly more noisy on demand.
Change-Id: Ib515170603a151cc3c3b10c743f1468a9875dbdc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6797
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
00730F01 contains the Avalon southbridge and a Platform Security
Processor (PSP). Supporting the PSP requires specific binaries to
be included in the ROM. The fletcher utility is used to sign PSP
binaries.
The IMC access routines are not accessible for newer AMD parts that
use pre-compiled AGESA. Change the Hudson code such that the IMC
code is not compiled if IMC is not selected in Kconfig.
Disable compilation of resume.c if HAVE_ACPI_RESUME is disabled.
The newer AMD mainboards will initially be released without ACPI
resume support (S3) due to the use of AGESA internals in the
existing Hudson routines. The Makefile change allows newer
mainboards to avoid the API issues.
Change Kconfig such that the FWM flag is always set for PSP-enabled
parts. This has the side effect of forcing the generation of the
FWM directory in the absence of GEC, IMC, and xHCI.
Change-Id: I6d056f54b60a64300841599490b9fafd561c4a7d
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6677
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
Provide functionality to create dynamic classes based on program name and
architecture for which the program needs to be compiled/linked. define_class
takes program_name and arch as its arguments and adds the program_name to
classes-y to create dynamic class. Also, compiler toolset is created for the
specified arch. All the files for this program can then be added to
program_name-y += .. Ensure that define_class is called before any files are
added to the class. Check subdirs-y for order of directory inclusion.
One such example of dynamic class is rmodules. Multiple rmodules can be used
which need to be compiled for different architectures. With dynamic classes,
this is possible.
Change-Id: Ie143ed6f79ced5f58c200394cff89b006bc9b342
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/6426
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
In the error case, they survived.
Change-Id: I15167be12ff9ee03f1b3bb86b93f20cb5be02b10
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6583
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
In an abuild run, cbfstool is built in a shared directory
using "make tools". Unfortunately the build system doesn't
actually use that binary directly but creates a per-board
copy (for convenience purposes when editing the image later)
and uses that.
With this change the build system uses the original file but
still creates the copy for the user, avoiding the race while
ensuring convenience.
Change-Id: I38c603a7eca5ef859875ad3031bf7a850189645f
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/6242
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
ifdfake is the newest tool addition that leads to build time
races on highly parallel builds.
Change-Id: I86289e50079da851dcc8e1c05c2536d5c03de87c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6197
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Let us not assume the 'clang' binary exists and is working just because
the user selected it in .config
Change-Id: Iad3cbf4a7cda0e1c4d435fbe426b7247233973ea
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6141
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
We now use the slightly more familiar CFLAGS_* and CPPFLAGS_*
for the same purpose.
Change-Id: Ifd2bd13f67f71fa0a15611a6d11a6a4c7994271b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5875
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I6e07fdec449d0b259d77986f65a60aa36d367cc8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5747
Tested-by: build bot (Jenkins)
|
|
This allows moving the build tree outside the source tree.
Change-Id: I97882c4820d2c962c27bf8d50378e64016ce5790
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5803
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allow ccache and scan-build to wrap romcc.
This works a bit different from the other compilers
because we only define it later.
Change-Id: I3adce91d3dde9dd50aa6a2baad5b457744f35575
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5773
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
No need to first define X86_32 and then replace every
single use of it with its lower cased equivalent.
Just start out with the lower case versions in the first
place.
Change-Id: I1e771ef443db1b8d34018d19a64a9ee489cd8133
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5767
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are a couple of places where CPPFLAGS are
pasted into CFLAGS, eliminate them.
Change-Id: Ic7f568cf87a7d9c5c52e2942032a867161036bd7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5765
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename INCLUDES to CPPFLAGS since the latter is more
commonly used for preprocessor options.
Change-Id: I522bb01c44856d0eccf221fa43d2d644bdf01d69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5764
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
They're all the same, so treat them that way.
Change-Id: I8e3976df1e3a0f9dbcf1d5373611f6197bc9701b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5763
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
'prove' that clang is supported (to some extent).
Change-Id: I181f4910ba64ab9746e7ac94aa79da23cdd41dad
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5709
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.
These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.
In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.
Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.
We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.
Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Remove all the common Makefile rules like coreboot.pre, coreboot.pre1 and others
from arch level Makefile.inc to top level Makefile.inc.
Also, organize Makefile.inc at arch level into per-stage rules and variables.
Change-Id: I7dc5b2d31c959b55bb92d9c7811427c4dada1db5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5571
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Other toolchains just don't cut it.
Change-Id: I7a0bdf60d89b5166c9a22c9e9f3f326b28f777b8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4584
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Start using the rmodtool for generating rmodules.
rmodule_link() has been changed to create 2 rules:
one for the passed in <name>, the other for creating
<name>.rmod which is an ELF file in the format of
an rmodule.
Since the header is not compiled and linked together
with an rmodule there needs to be a way of marking
which symbol is the entry point. __rmodule_entry is
the symbol used for knowing the entry point. There
was a little churn in SMM modules to ensure an
rmodule entry point symbol takes a single argument.
Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5379
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Refactor Makefile build system as decompartmentalise armv7a and i386
targets from crossgcc.
Change-Id: If93f62050810ba594c9925a9eb8ba9d04bc76459
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4008
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The initial Bay Trail code is intended to support
the mobile and desktop version of Bay Trail. This support
can train memory and execute through ramstage. However,
the resource allocation is not curently handled correctly.
The MRC cache parameters are successfully saved and reused
after the initial cold boot.
BUG=chrome-os-partner:22292
BRANCH=None
TEST=Built and booted on a reference board through ramstage.
Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168387
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4847
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Parallelized build might try to build SMM before option_table.h is
created. Remove related redundant explicit rules.
Change-Id: Ida8b5c408af05adcf3210ce7bfc8a1e5959194c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4299
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
On newer Intel systems, the flash ROM is shared between the host
processor (BIOS), it's Management Engine (ME) and an integrated ethernet
controller (GbE). The layout of the flash ROM (and other information) is
kept in the so called Intel Firmware Descriptor (IFD). If we only want
to build coreboot to update the BIOS section, all we need is the flash
layout.
This patch adds the option to specify the flash layout in the
mainboard's Kconfig, and thus, to build without the real IFD. However,
with such a build, one has to make sure that the IFD section on the
flash ROM won't be written over (nor any other section that hasn't been
included by coreboot). A patch to write selected sections of a flash ROM
with IFD has been sent to the flashrom mailing list [1].
[1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
Change-Id: Ia23e439a00a197fb54852263f8e206f16c3e8851
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/3524
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add an rmodules class so that there are default rules for compiling
files that will be linked by the rmodule linker. Also, add a new type
for SIPI vectors.
Change-Id: Ided9e15577b34aff34dc23e5e16791c607caf399
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2751
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add support for SMM modules by leveraging the RMODULE lib. This allows
for easier dynamic SMM handler placement. The SMM module support
consists of a common stub which puts the executing CPU into protected
mode and calls into a pre-defined handler. This stub can then be used
for SMM relocation as well as the real SMM handler. For the relocation
one can call back into coreboot ramstage code to perform relocation in
C code.
The handler is essentially a copy of smihandler.c, but it drops the TSEG
differences. It also doesn't rely on the SMM revision as the cpu code
should know what processor it is supported.
Ideally the CONFIG_SMM_TSEG option could be removed once the existing
users of that option transitioned away from tseg_relocate() and
smi_get_tseg_base().
The generic SMI callbacks are now not marked as weak in the
declaration so that there aren't unlinked references. The handler
has default implementations of the generic SMI callbacks which are
marked as weak. If an external compilation module has a strong symbol
the linker will use that instead of the link one.
Additionally, the parameters to the generic callbacks are dropped as
they don't seem to be used directly. The SMM runtime can provide the
necessary support if needed.
Change-Id: I1e2fed71a40b2eb03197697d29e9c4b246e3b25e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2693
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The 'git describe' command is used to obtain the source tree status
information when building coreboot. As used this command expects git
tags to be defined, so it can report the discrepancy between the
current state of the tree and the latest tag.
The problem is that the coreboot source tree does not have any git
tags defined, so when 'git describe' is invoked, it reports "fatal: No
names found, cannot describe anything.". This scary message can be
seen on the console during coreboot builds.
The solution is to add --always to the `git describe' invocation,
which causes it to report the discrepancy with the latest sha1, if
any, which is better than nothing.
$ rm -rf /tmp/li && mkdir /tmp/li
$ cp configs/config.link .config
$ make obj=/tmp/li oldconfig
$ make obj=/tmp/li
$ grep COREBOOT_VERSION /tmp/li/build.h
#define COREBOOT_VERSION "1623c06"
$ echo '#' >> Makefile.inc
$ grep COREBOOT_VERSION /tmp/li/build.h
$ make obj=/tmp/li
#define COREBOOT_VERSION "1623c06-dirty"
$ git checkout Makefile.inc
Change-Id: Ia77428b7cd765cbbd59bdbf8251b7bef489d47a5
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/2637
Tested-by: build bot (Jenkins)
|
|
REQUIRES_BLOB assumes that all blob files come from the 3rdparty directory,
builds failed when all files were configured to point to other sources.
This change modifies the blob mechanism so that cbfs-files can be tagged as
"required" with some specification what is missing.
If the configured files can't be found (wrong path, missing file), the build
system returns a list of descriptions, then aborts.
Change-Id: Icc128e3afcee8acf49bff9409b93af7769db3517
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/2418
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Remove duplicated / testing code and share more driver for bootblock, romstage
and ramstage.
The __PRE_RAM__ is now also defined in bootblock build stage, since bootblock is
executed before RAM is initialized.
Change-Id: I4f5469b1545631eee1cf9f2f5df93cbe3a58268b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2282
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
For ARM platform, the bootblock may need more C source files to initialize
UART / SPI for loading romstage. To preventing making complex and implicit
dependency by using #include inside bootblock.c, we should add a new build class
"bootblock".
Also #ifdef __BOOT_BLOCK__ can be used to detect if the source is being compiled
for boot block.
For x86, the bootblock is limited to fewer assembly files so it's not using this
class. (Some files shared by x86 and arm in top level or lib are also changed
but nothing should be changed in x86 build process.)
Change-Id: Ia81bccc366d2082397d133d9245f7ecb33b8bc8b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2252
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In order to provide some insight on what code is executed during
coreboot's run time and how well our test scenarios work, this
adds code coverage support to coreboot's ram stage. This should
be easily adaptable for payloads, and maybe even romstage.
See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for
more information.
To instrument coreboot, select CONFIG_COVERAGE ("Code coverage
support") in Kconfig, and recompile coreboot. coreboot will then
store its code coverage information into CBMEM, if possible.
Then, run "cbmem -CV" as root on the target system running the
instrumented coreboot binary. This will create a whole bunch of
.gcda files that contain coverage information. Tar them up, copy
them to your build system machine, and untar them. Then you can
use your favorite coverage utility (gcov, lcov, ...) to visualize
code coverage.
For a sneak peak of what will expect you, please take a look
at http://www.coreboot.org/~stepan/coreboot-coverage/
Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2052
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Martin Roth <martin@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It's too easy to forget this and it's kind of important, so Just Add It.
Change-Id: Ic7ab7658425a98d5d435bfef46f89cc6a56c7284
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2096
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
to match src/include/device
Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1960
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
It only has two files, move them to src/lib
Change-Id: I17943db4c455aa3a934db1cf56e56e89c009679f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1959
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
After collecting dependencies for ramstage, add an intermediate step
in which object files are linked per directory. The results are then
linked into the final binary.
This reduces the maximum command line length and might also help with
future use of LTO linking.
Also adapt the lint test for build dir handling, since printall
doesn't provide individual object files for ramstage anymore.
Change-Id: Ie40febd8c1eaf4609944eedeab46d870639e53df
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The use of ramstage.a required the build system to handle some
object files in a special way, which were put in the drivers
class.
These object files didn't provide any symbols that were used
directly (but only via linker magic), and so the linker never
considered them for inclusion.
With ramstage.a gone, we can drop this special class, too.
Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
With this change the the xcompile script now creates environment variables
for more than one architecture.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Change-Id: I349a1fd1d865ef16979f1dfd6aeca12b1ee2eed6
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/1915
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
If they come from the build system, file names might be guarded in
quotes, which confuses make. Drop them here.
Change-Id: Ice0d3c4bc2c45a3f121a85e1b9f5f6420c5761d5
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Right now coreboot's build process produces images that are
not booting on actual hardware because they are smaller than
the actual flash device and also don't have an IFD nor an ME
firmware in them. In order to produce bootable images, you
needed a wrapper script / extra step until now. With this
change, the resulting coreboot.rom is actually bootable.
Change-Id: I82714069fb004d4badc41698747a704bd9fed4da
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1771
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
- Adding more and more optional and non-optional parameters
bloated cbfstool and made the code hard to read with a lot
of parsing in the actual cbfs handling functions. This change
switches over to use getopt style options for everything but
command and cbfs file name.
- This allows us to simplify the coreboot Makefiles a bit
- Also, add guards to include files
- Fix some 80+ character lines
- Add more detailed error reporting
- Free memory we're allocating
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ia9137942deb8d26bbb30068e6de72466afe9b0a7
Reviewed-on: http://review.coreboot.org/1800
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
http://netbsd.gw.com/cgi-bin/man-cgi?date++NetBSD-current
The NetBSD manual tells us the date in NetBSD doesn't take any flags
to enable or disable padding in the format.
By default, date pads numeric fields with zeroes. This will convert the
number to octal one. So add "0x" to convert it to BCD directly.
Change-Id: Icd44312acf01b8232f1da1fbaa70630d09007b40
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1804
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
The range of weekday in CMOS is 01-07, while the Sunday is 1, and
Saturday is 7. The comand date in coreutils defines
%u day of week (1..7); 1 is Monday
%w day of week (0..6); 0 is Sunday
There are 1 day offset for each week day. So we use "%w" and plus 1
before we update the weekday in CMOS.
Change-Id: I3fab4e95f04924ff0ba10a7012b57da1d3f0d1a5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1802
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
Change-Id: I0c5ed84a405dc9e98e8912ccf1a2f83c4c601fc7
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1803
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
Otherwise object paths will look like build/cbfs/"fallback"/...
Change-Id: I3e60f90f7490e71b0da075d3ea8fc847abc07938
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1700
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When a power failure happens on the RTC rail, the CMOS memory (including
the RTC registers) is filled with garbage.
So, we erase the full first bank (112 bytes) and we reset the RTC date
to the build date.
To test, disconnect the CMOS battery to produce an RTC power
failure, then boot the machine and observe the RTC date is the build
date using "cat /sys/class/rtc/rtc0/date"
Change-Id: I684bb3ad5079f96825555d4ed84dc0f7914e9884
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-on: http://review.coreboot.org/1697
Reviewed-by: Marc Jones <marcj303@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id5564bf7a12b3ea9a5e60bd9522466157ace8c65
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1601
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
In some cases we request mktemp to create a temporary file in
$(obj)/mainboard/... before it exists.
Let's make sure the directory exists
Change-Id: I51f0065c30b1f25eb501a6fd5edefb3f4c15d0ab
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1532
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Cygwin's hostname comes from coreutils, which does not support all
the options that some other hostname implementations provide.
Change-Id: Ia6bd9157c351f440ad225046638a6bf3f9cfba11
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1546
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I86cecf6aee1fcb682cb32bd0f03e014fd1afe594
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1549
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This patch aims to improve the microcode in CBFS handling that was
brought by the last patches from Stefan and the Chromium team.
Choices in Kconfig
- 1) Generate microcode from tree (default)
- 2) Include external microcode file
- 3) Do not put microcode in CBFS
The idea is to give the user full control over including non-free
blobs in the final ROM image.
MICROCODE_INCLUDE_PATH Kconfig variable is eliminated. Microcode
is handled by a special class, cpu_microcode, as such:
cpu_microcode-y += microcode_file.c
MICROCODE_IN_CBFS should, in the future, be eliminated. Right now it is
needed by intel microcode updating. Once all intel cpus are converted to
cbfs updating, this variable can go away.
These files are then compiled and assembled into a binary CBFS file.
The advantage of doing it this way versus the current method is that
1) The rule is CPU-agnostic
2) Gives user more control over if and how to include microcode blobs
3) The rules for building the microcode binary are kept in
src/cpu/Makefile.inc, and thus would not clobber the other makefiles,
which are already overloaded and very difficult to navigate.
Change-Id: I38d0c9851691aa112e93031860e94895857ebb76
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/1245
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
