summaryrefslogtreecommitdiff
path: root/Documentation/mainboard/hp
AgeCommit message (Collapse)Author
2023-07-03mb/hp: Add new port for compaq_8300_elite_usdtRiku Viitanen
New port based on autoport. Autoport worked with minor tweaks, but fan speeds went almost immediately to the maximum. They are controlled by the NPCD379 Super I/O which isn't supported by coreboot. But coreboot already has code for NPCD378, which HP Compaq 8200 SFF makes use of. So SuperIO configuration was copied from the 8200 SFF port. It seems to work without any issues in "normal" use. Most importantly, fan speed control seems to work correctly. However this means that some of the SuperIO LDNs may be configured incorrectly. See the comments on Gerrit for more information. The following is tested and is working: * Native raminit with both DIMMs * Libgfxinit textmode and framebuffer on both DisplayPorts and VGA * External USB2 and USB3 ports: they all work * USB 3.0 SuperSpeed on Linux-libre (rear, 4 ports) * Ethernet * Mini-PCIe WLAN * SATA: 2.5" SSD and optical drive bay * Booting Live Linuxes from DVD and USB with SeaBIOS 1.16.1 * GRUB (with Libreboot config) * PS/2 keyboard and mouse * S3 suspend and resume, wake using USB keyboard * Headphone output, line out, internal speaker * Wake on LAN * Rebooting * CMOS options & nvramcui Untested: * mSATA slot. The SATA port needs to be enabled on devicetree too, but I'm unable to test due to lack of hardware * Line in, mic input * MXM graphics card * EHCI debug Not working: * Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so maybe it just isn't present * PS/2 keyboard wake from S3 Change-Id: I2dc31778c2aa1987d5acdf355973a203dd0bb3a3 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74906 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-25Documentation/mainboard/hp: Add more about internal flashingVesek
Add a more detailed explanation of internal flashing on the HP Compaq 8200 Elite SFF. Signed-off-by: Václav Straka <venda.straka@gmail.com> Change-Id: I53a697a2dd6c10fff8f287284f75d229c7c4b636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-03-23mb/hp/snb_ivb_laptops: Add HP EliteBook 2170p as 2570p variantBill XIE
Most of the code is taken from 2570p, adjusted with autoport, SuperIO from 8470p and inteltool, GPIO config from inteltool via autoport. The laptop works well under coreboot with SeaBIOS 1.16.1 payload, running Debian GNU/Linux with kernel 6.1.15. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I854104516d5b6fbd78ee2989197000a7dbb85136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73856 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13payloads/tianocore: Rename TianoCore to edk2Sean Rhodes
coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-30mb/hp/z220_series: Improve the port for z220_sff_workstationBill XIE
- Move configs for PCIe ports not present on z220_sff_workstation from the devicetree.cb of base board to the overridetree.cb of z220_cmt_workstation. - Add a note for ME/AMT Flash Override jumper, for it is hard to flash from OEM firmware either internally or externally without closing this jumper. - Add a side note for similar HP Compaq Elite 8300 SFF. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I35d8b97f52a83910a61c12b1f7367ee7a19a9ad7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-11Documentation: Move firmware flashing tutorial to tutorial sectionFelix Singer
There is no need that the tutorial for flashing firmware has its own point in the main menu. Thus, move it to the tutorial section. Change-Id: Ife6d97254af4c006fe01480a78c76303f9cb34bb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
2021-02-09Documentation: Use correct KiB/MiB units instead of KB/MBEvgeny Zinoviev
Fix a common mistake of using KB/MB where KiB/MiB is what actually is meant. 1 MB = (10^3)^2 = 1000000 1 MiB = (2^10)^2 = 1048576 Change-Id: I78327652b6c6526318071a9d4bafd7ec279ea614 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39685 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10mb/hp: Add HP EliteBook Folio 9480mIru Cai
The code is based on autoport, with necessary modifications. This laptop uses SMSC MEC1322 embedded controller, but the EC interface is the same as the EliteBook laptops of previous generations that use KBC1126 EC. So it still uses ec/hp/kbc1126, but does not need EC firmware inserted into CBFS. We also need to leave the end of the OEM flash content untouched, so the default ROM size is set to 12MiB instead of 16MiB, and we need to modify the IFD when flashing. Thanks to persmule for providing the laptop and pointing out how to program the system flash chip of it. Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09Documentation: Introduce HP Sure Start and the method to bypass itIru Cai
Change-Id: Id198afdaa13b4c361e1b77a56d5a2436ed1c4c86 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45577 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mainboard: Add HP EliteBook 2560pIru Cai
Most of the code is generated by autoport. The laptop works well under coreboot with SeaBIOS 1.13.0 payload, running Arch Linux with kernel 5.4.39 and 5.6.11. Change-Id: I126916e201fb8e4b9067f2dececebfb5bae6df73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-20Doc/mb/hp: rename the document about HP laptops with KBC1126Iru Cai
Later EliteBooks use different EC chips and have different EC firmware interfaces, so rename the document elitebook_series.md to a more precise name and also do some rewriting. A link to the code review page for 8760w is also added because the port for this laptop is not merged yet. Change-Id: I2f9b8c4e52ed760c16977d16838cca9e490cda05 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-06mb/hp: Add Z220 SFF workstationPatrick Rudolph
* Add initial board commit based on HP8200 SFF. * Add documentation. * Serial and PCIe slot are working. Tested on HP Z220. Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-25Documentation: Add HP EliteBook 8760wIru Cai
Also add the HP EliteBook document from wiki. Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30Documentation: Update index.md and move filesPhilipp Deppenwiese
* Add more subdirectories and index.mds. * Move "getting started" and "lessons" into sub-directories. * Move "NativeRaminit" into northbridge/intel/sandybridge folder. * Move "MultiProcessorInit" into soc/intel/icelake folder. * Reference new files Change-Id: I78c3ec0e8bcc342686277ae141a88d0486680978 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26262 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28Documentation: Add HP Compaq 8200 and NPCD378Patrick Rudolph
Change-Id: I56db0cc11cfa5a1a537091553393542312d4f212 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26543 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 07:20:57 +0000