| Age | Commit message (Collapse) | Author |
|---|
|
Some devices may generate scancodes for the Fn key if they have one.
If they do, we should add them to the linux,keymap binding.
BUG=b:333096023
TEST=Flash DUT that emits a scancode for the Fn key, verify that it is
mapped to KEY_FN in the Linux kernel using `evtest` when pressing the Fn
key.
Change-Id: Ie4daa64bc6b619392276d0b5f16e2d195d5bd68c
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Others variant boards might use diff HDA Codec, so move hda verb
to brox variant dir.
BUG=b:314702466
BRANCH=None
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Device list:
cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name
ALC256
cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name
Realtek
Headphone detection:
evtest 8
Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1
Event: time 1713404716.656768, -------------- SYN_REPORT ------------
Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0
Event: time 1713404722.802661, -------------- SYN_REPORT ------------
Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945
Reviewed-by: Poornima Tom <poornima.tom@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
[ERROR] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I2231afd67031c963045b6e7930d239368c723aa5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75142
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
One can argue whether or not this is desirable, but disabling this means
you cannot use power from the USB ports when the board shuts down, which
is better controlled from an option, but at the very least disabled so
as to replicate default vendor firmware behaviour.
Disable deep sleep like it is disabled on all other variants.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I660f2efebf197df055ee7b9c349e4c2b64bda6cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75139
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copied this bit from asus/p8z77-m_pro, without it a GRUB2 payload will
get stuck in an endless loop showing
Unknown key 0xff detected
whenever there is an USB device (such as a keyboard) connected.
In this mode GRUB2 is so busy showing this message repeatedly that no
other keypress ever gets handled, and thus no other remedy is possible
than a reset via mb pins and unplugging the USB device.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Iebd433e2762a69241257e1b4f859319536a8d8f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75138
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config
field to prevent depthcharge build break.
BUG=b:333325006
TEST=emerge-brox coreboot depthcharge with no errors
Change-Id: I0e220787d6ac73ec8fa2469ed958981d0801920e
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Make sure it can be used for other driver.
At present, i2c_generic_write_gpio() is not suitable for being called
by other drivers, so delete it, add acpi_device_write_dsd_gpio() to
replace it, and make it public.
BUG=None
TEST= Build BIOS FW pass and it can be use for other driver.
Change-Id: Ifb2e60690711b39743afd455c6776c5ace863378
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update the A0 and B0 stepping IDs in CPU table per
the PPR document 57254 Rev 1.56 and 1.69
Change-Id: I0072f25f981ac7d5df2522594c8788bfabcbf24c
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change `inl()` return type from `unsigned long` to `unsigned int` to
match the function definition and ensure consistency across platforms.
BUG=b:242829490
TEST=Compiled successfully in 32-bit and 64-bit modes.
Change-Id: I681935665c8de9ee472ab72fe1ac2f5dcc0f2534
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
In coreboot, domain indicates hardware units that provide/group
resource windows, For Xeon-SP, domains are PCIe compatible and
further function in many aspects, e.g. PCIe, CXL, IOAT, UBOX.
Rename dev_get_pci_domain to dev_get_domain to align with coreboot
concept and distinguish from Xeon-SP concept.
TEST=Build and boot on intel/archercity CRB
Change-Id: I51b18b30fb41038869ea1384b01091da31a895b9
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Allows to use the function in more places that expect the
struct device to be readonly.
TEST=Build and boot on intel/archercity CRB
Change-Id: Iac04fe6931a43070f6638b399adbff2ce64829c9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81275
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These machines come with a TPM1.2 device by default. It is somewhat
obsolete these days, but there is no harm in enabling it.
Change-Id: Iec05321862aed58695c256b00494e5953219786d
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81827
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
WDT1 is currently enabled but gives these errors:
[ERROR] ERROR: Resource didn't fit!!!
PNP: 002e.8 60 * size: 0x8 limit: fff io
[ERROR] PNP: 002e.8 60 io size: 0x0000000008 not assigned in devicetree
Therefore, just disable it, like it is disabled on all other variants.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ie33c219eae60f55d272b261480283a02c2d502e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75144
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allowing access to change GPIO configuration from ACPI is asking
for trouble. Kill it while nobody cares (yet).
Access to mainpulate and blink GPIOs is maintained.
Change-Id: Id80a7e2f815a58750623c133bb30e5ed84a6e2ed
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
According to datasheet, the enable bit for direct I/O access to GPIO
lines is at CR30[3] of LDN 8, not [0] as currently coded.
Change-Id: Id2f997aebc36a2fcaa8c3763f324d3b288f785d2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81926
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only implementations of `mb_post_raminit_setup()` in the tree are
found in Lenovo ThinkPads. These boards use this function to toggle a
SMBus mux, which makes the DIMM SPDs inaccessible. Given that the SPD
data is needed in `setup_sdram_meminfo()` and that there are no other
side-effects, simply move the call to `mb_post_raminit_setup()` after
the call to `setup_sdram_meminfo()`.
TEST=Verify SMBIOS Type 17 information for lenovo/x200 is correct.
Change-Id: I46abffa48e7e0848f9346ce9c6498860e4ece2da
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fill in memory info so that coreboot can generate SMBIOS Type 17 tables.
The S/N, P/N and module ID fields are only populated for DDR3.
Change-Id: I92060ce05bdf0ca617a3383a2db1fdbd43df6fe4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81861
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jean Lucas
|
|
Set GPIO27 of PCH to blink before going to sleep. This blinks the
power LED. Revert after waking up.
Tested on p8z77-m. Power LED blinks in suspend.
Change-Id: Ie1b40ae17fa2ef397585b86ac82730099b611dda
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Break out the individual bits of GPIO blink register as was done
for GPIO level register. An upcoming patch will use this.
Change-Id: I6f4749f60a9d569deba4b31f09f07a1321dabf4a
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81922
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
According to a boardview, GPIO27 is connected to the front
panel power LED, and should be output.
It will be made to blink before entering S3 suspend in a follow-up.
Change-Id: I7e47f63999e8c0bfbd37e3273d33c00bc035bcbb
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Support Memory for Hynix H58G66AK6BX070 and Samsung
K3KL9L90CM-MGCT in mem_parts_used list, and generate SPD ID for these
parts.
DRAM Part Name ID to assign
H58G66AK6BX070 4 (0100)
K3KL9L90CM-MGCT 5 (0101)
BUG=b:335341310
BRANCH=firmware-nissa-15217.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go ADL lp5 \
src/mainboard/google/brya/variants/glassway/memory/ \
src/mainboard/google/brya/variants/glassway/memory/\
mem_parts_used.txt"
Change-Id: Ic07ec36a8015ce6433196a93e894b818a515b954
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81955
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
|
|
Follows Intel SoC recommendation to avoid potential cache contention
issues during early (pre-DRAM) microcode loading.
Source: MTL_ARL_Processor_Family_BiosSpec_Rev1p0
Document Number: 729384
BUG=b:330536271
TEST=Able to boot to ChromeOS.
w/o this patch:
[DEBUG] microcode: sig=0xa06a4 pf=0x80 revision=0x19
[INFO ] CBFS: Found 'cpu_microcode_a06a4.bin' @0x1d9c0 size 0x21400
in mcache @0xfef89680
[INFO ] VB2:vb2_digest_init() 136192 bytes, hash algo 2, HW
acceleration enabled
[INFO ] microcode: load microcode patch
[ERROR] microcode: Update failed
w/ this patch:
[ERROR] Microcode Error: Early microcode patching is not supported due
to NEM limitation
Change-Id: I1e433f5bede036800b27900b4b13a399b4f45d6f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81954
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ibexpeak has no USB 3 capabilities.
They were kept briefly when its devicetree structure was split from
bd82x6x in commit ab4de83f4330 ("sb/intel/ibexpeak: Sever bd82x6x
source dependency") to verify correctness. With that done, they
can go.
Change-Id: I6b847e1532d2e84a7b408a8858c8613b322d0373
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Enable SaGv support for brox
BUG=None
BRANCH=None
TEST=Boot brox with SAGv enabled and verify in fsp debug logs
Change-Id: I80c44e7df1d75732c6982b27e44ecd6060b1b3f1
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81556
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The binary hashes from GitHub releases are not stable. Use the Intel
mirror.
Change-Id: If3738b0cdab07c37ac1459a53e399e5de54435d5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80721
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Several brya-based boards use UFS for storage, so enable the edk2 UFS
driver when using the edk2 payload.
TEST=build/boot google/brya (banshee, craaskov), verify internal boot
media functional with edk2 payload.
Change-Id: I3dc018582e974bf73c7668f78da9b81eeb038c01
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81871
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Several zork-based boards use eMMC for storage, so enable the edk2 eMMC
driver when using the edk2 payload.
TEST=build/boot google/zork (morphius, vilboz), verify internal boot
media (both eMMC and NVMe) functional with edk2 payload.
Change-Id: Ib7e98f309594554dbcf1ddd875d47c89bd9e0e44
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add a Kconfig to selectively enable the AMD Picasso eMMC driver
recently added to MrChromebox's edk2 fork. When selected, will enable
booting from AMD Picasso devices with eMMC storage.
TEST=tested with rest of patch train
Change-Id: I6536a6f243f6766b913e295afebcf5b965e4e969
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81892
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we keep the double-quotes from Kconfig, resulting in an
invalid path. So just call `strip_quotes` like we do with all other
paths from Kconfig.
Change-Id: Ibcaa59be0fdd84d1fb9e061394fd9b0f7aa1830b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81947
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
9fdd96bfc6 keyboard: Add support for a "Dictation" key
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
Change-Id: I7ec965d07aa4cb1fe54916845780f342ea3debb9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81932
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new Krabby follower device 'Veluza'.
BUG=b:333630131
BRANCH=corsola
TEST=none
Change-Id: Idedcbfbddd6d98a51cf28a0963d68f6d8c68382c
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81791
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add config choice menu and pad configuration to put Mini PCIe port into
mSATA mode.
The vendor firmware's "Chipset->Mini PCIe / mSATA Switch" option has
been used together with the output of inteltool and intel2pm to deduce
the exact pad configuration.
Note: the vendor firmware does not autodetect the mode, and the default
setting for the port is "Mini PCIe".
Tested with Kingston SUV500MS120G mSATA SSD.
Change-Id: Ic2da1dd4252ebb5e373bc65418e321f566d4c10f
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add Kconfig option `X86_BOOTBLOCK_EXTRA_PROGRAM_SZ` to reserve extra
space, avoiding overlap between .text and .init sections when using
older linkers (binutils 2.3x). Default is 1024 bytes (1 KiB) for
ChromeOS, 0 otherwise.
BUG=b:332445618
TEST=Built and booted google/rex (32-bit/64-bit).
Change-Id: I019bf6896d84b2a84dff6f22323f0f446c0740b5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81886
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This is another readily available (used market) system.
Based on autoport.
* All peripherals should work.
* Automatic fan control as well as S3 are working.
* The board was tested to boot Linux and Windows. EHCI debug is
untested.
* When using MrChromebox edk2 with secure boot build in, the board will
hang on each boot for about 20 seconds before continuing.
There are some quirks for doing the first flash, see the documentation.
Change-Id: Idf793fe915096cf2553572964faec5c7f8526b9a
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I996b8e56d943e26ab426f1802ada07cde805286d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81915
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The command "wget" prints some hyperlink with "%", which will be
filtered in by previous regular expression. So we need to change to
match the string with exactly 3 digits and a percent symbol.
TEST:
echo 45% | grep -o "\<[0-9]\{1,3\}%"
45%
echo 1245% | grep -o "\<[0-9]\{1,3\}%"
<empty>
echo aa% | grep -o "\<[0-9]\{1,3\}%"
<empty>
Change-Id: I6ef9e7c87fd4ee6cc707346954d91e6e3af3b939
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Starting from here CONFIG_TPM1 and CONFIG_TPM2 are no longer mutually
exclusive.
Change-Id: I44c5a1d825afe414c2f5c2c90f4cfe41ba9bef5f
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69162
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `PRIORITIZE_INTERNAL` option was somehow duplicated, so remove the
extra copy, leaving the one under the MrChromebox repo specific
settings.
TEST=build qemu w/edk2 payload, check build log that the
'PRIORITIZE_INTERNAL' option is only added once to the build string.
Change-Id: I4c4c433184d93337c926e256e77054afc00a2566
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
1. Remove non-use i2c address 0x10, 0x24 and 0x40 of touch IC for touch screen
2. Add new i2c address 0x5d of Goodix touch IC for touch screen
3. Add new i2c address 0x38 of Focal touch IC for touch pad
BUG=b:333804572
TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage
Change-Id: I8e2c60820a07b99b69860fd4f6557b448aef2341
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add a Kconfig to selectively enable the UFS DXE driver recently added
to MrChromebox's edk2 fork. When selected, will enable booting from
devices with UFS storage.
TEST=tested with rest of patch train
Change-Id: I0b54d21dc87abf6938c03948830f92ce5097ef7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81870
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the pujjoga variant of nissa reference board by copying the
template files to a new directory named for the variant.
Due to new_variant.py limitation that repo can no longer be used in
inside, created this CL manually following google suggestion.
BUG=b:333839287
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_PUJJOGA
Change-Id: Ia8eb11eb65f9013e83abd45eefe7705d05b8697e
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81891
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
It shares southbridge devicetree definition with bd82x6x, causing
changes made there to break builds for boards with this PCH. Give
ibexpeak its own copy.
TEST=abuild tested with lenovo/t410, lenovo/x201, packardbell/ms2290. Timeless binary did not change for all.
Change-Id: I08229ca658bd9c360b6be6137d882d319041b730
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81889
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It uses ibexpeak southbridge and should include its pch.h,
not bd82x6x's.
TEST=Timeless binary did not change.
Change-Id: Iafa83b7f3c1cd2d8ab9af51aa331ca673d9a66df
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clang complains that the two enumerations are incompatible. However, the
values themselves are the same (0: mobile, 1: desktop, 5: ULT). So, cast
the function's return value to silence the warning.
Change-Id: If7b5e22e893e9f3f17a15197c65448fb782590f6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81862
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Program the AER capability header register in a single write because
it's write-once. In addition, only PCH-LP supports L1 sub-states, so
only report the L1 sub-state capability on PCH-LP. This follows what
Lynx Point PCH reference code version 1.9.1 does.
Change-Id: I08bd107eec7a3b2f1701c4657ae104e0818ae035
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57503
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Lynx Point PCH reference code version 1.9.1 masks the upper 4 bits of
the PCIe root port register at offset 0xf5.
Change-Id: I9529ad88d34a5cb4a09843e3165f3a70c5ea22e8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57502
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Lynx Point PCH reference code version 1.9.1 programs the larger L1 exit
latency when ASPM is enabled. Document 535127 (BDW PCH-LP BS) also does
the same. Correct the condition accordingly. On Lynx Point, also remove
a now-redundant write to the LCAP register (offset 0x4c).
Change-Id: I2166bd5b5504ed97adcd2db0a802da02da4c91f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57501
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot zork (morphius) with SMMSTORE enabled.
Change-Id: Ifd3be9b0757e270d2f106e2fbebf3991e49dec65
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot skyrim (frostflow) with SMMSTORE enabled.
Change-Id: I34f9d27c27ab7148dfc530322f741a576c348de7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
Change-Id: Ic45324b8c5bbd205e889e934c9d5dd17f7775152
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81867
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
TEST=build/boot guybrush (dewatt) with SMMSTORE enabled.
Change-Id: Ic4fdacd493d83fa3c1683a06d1276b0190f6db8b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since
a minimum of (2) 64K blocks are needed. Increase the size to 256K to
match other boards in the tree.
Change-Id: I04d57ff7f74d79118652cfe227cf223375df6472
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81865
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The karma variant, being a Chromebase, has an internal eDP output for
the built-in display whereas the fizz/endeavour variants do not. Use
separate gma-mainboard.ads files so that karma's internal panel works
properly with libgfxinit.
TEST=build google/fizz (fizz/karma) with libgfxinit enabled, ensure
correct gma-mainboard.ads file is included in the build.
Change-Id: Ia6aca538ba8c13b48aa80901222071d704b5f0c0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found by inteltool on HP Pro 3500 Series running vendor firmware version
8.14 Rev.A.
Change-Id: I156787e533c2605e7440548a2d3bf711bb1af5d7
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81427
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prevents name clashes with drivers/spi/tpm and allows both to be
potentially compiled in at the same time.
Change-Id: I0aa2686103546e0696ab8dcf77e2b99bf9734915
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Create the greenbayupoc variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:329530883
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_GREENBAYUPOC.
Change-Id: I90936d97b41e59c49dd92997146caf580bce1f4f
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add a new Krabby follower device 'Skitty'.
BUG=b:331702790
TEST=emerge-corsola coreboot chromeos-bootimage
BRANCH=corsola
Change-Id: I2f12bccfda591a5baf8d23d217b6f1f81b059d15
Signed-off-by: Herbert Wu <herbert1_wu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81772
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Geoffrey Chien <geoffrey_chien@pegatron.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Shawn Ku <shawnku@google.com>
|
|
Some internal keyboards have a dictation key; this commit simply adds
support for this key by adding the mapping from the scancode to the
Linux keycode for use in the linux,physmap ACPI table.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel.
Change-Id: Iabc56662a9d6b29e84ab81ed93cb46d2e8372de9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Mark eMMC as non-removable to allow Windows 10/11 to install now that
edk2 can boot from it.
Change-Id: If0e14106521f99cb97d1bf421f4d82d1234c2f15
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These files were added after the switch.
Change-Id: I1986e4f921e0e56fe5255433d4b9216dc7c4dc59
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81856
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the official microcode updates from intel-microcode submodule
by default. Downstream users can still decide to use their own files.
Change-Id: I58121cc2ca7699d3d26581d7d5875ec74deeeb93
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81637
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
This pragma says to IWYU (Include What You Use) that the current file
is supposed to provide commented header.
Change-Id: I3acb5e6b18443e454d8174b0b1f9d207c0fb78b5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Lynxpoint has them, so add them on Broadwell as well.
Change-Id: Iaa3e8044090262a64e58062ec4b116976978ce55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Lynx Point PCH reference code version 1.9.1 checks bit 29 to detect ASPM
on PCH-LP root port #6, not bit 28. Document 535127 (BDW PCH-LP BS) also
uses bit 29 for root port #6. Correct the bit used in the check, as well
as the surrounding comments.
Change-Id: Ie4bd7cbbfc151762f29eab1326567f987b25ab19
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57500
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For current generation SPR/EMR you need to add at least
3 different microcodes having about 2MiB of size in total.
This doesn't work with the hardcoded offset and size in Kconfig.
Since it's loaded through FIT there's no need to pass it to FSP-T.
Drop the hardcoded locations and place it somewhere in CBFS.
Test: Booted on ibm/sbp1 with microcode confirmed loaded in
bootblock on BSP. All the APs also have the correct
microcode version loaded.
TEST= Build and boot on intel/archercity CRB
'cat /proc/cpuinfo | grep microcode' result doesn't change
before and after this patch.
Change-Id: Iaa7007c2b11a860c9c664a7e753440bad7fe858e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81635
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Compress FSP-S to save some space in CBFS.
Reduces the size of debug FSP-S by about 25%.
Test: Still boots on ibm/sbp1.
TEST= Build and boot on intel/archercity CRB.
Change-Id: I6248e7cabbce45f6c2fedfab34f328309f87e868
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81634
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Source:
PrimeCell UART (PL011) Technical Reference Manual Revision: r1p5
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I58409b23e3790a052d3bc0ecf6a6bede15b4d76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80180
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot stumpy to payload, verify fan noise is negligible.
Change-Id: I287e46202ee1c112d1da63c0d8b7889958e3807e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81514
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Recent changes to the ITE 8772F SIO code caused the initial fan PWM
to change from 0 to 50%; set it to 30% to reduce fan noise while
still providing some temp control before the OS/ACPI takes over.
TEST=build/boot google/beltino to payload, verify fan noise is
negligible.
Change-Id: I0177235d73e051f02b5333cf1d735556382b919f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A function to disable the PME# output was added. This is required to
set up the SuperIO on the "HP Pro 3500 Series" mb.
Change-Id: I94f023ba6eb24b5fb1c5e0b30eb65738f50a87eb
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81589
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The 3VSBSW# signal can now also be disabled again which is necessary to
power components down properly in SMM when entering S5. In such cases
the signal will be enabled only in the SMM S3 handler.
Change-Id: I8535176908ec39e9916774135e028cbc7c203474
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81588
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A number of ITE SIOs support "special fan control vectors", which
effectively allow non-linear fan speed control. This is for example used
by the vendor firmware of the "HP Pro 3500 Series".
The special vector registers won't be written to until the mb's
devicetree configures `FAN_VECX.tmp_start != 0`.
Change-Id: I93df2b5652fc3fde775b6161fa5bebc4a34d5e94
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The it8772f is now configured by the much better common code that is
used for other chips in the family as well. This mainly concerns the EC,
the GPIO functionality was not moved to common as it currently lacks a
sane abstraction in any codebase.
The datasheets of the it8772e(f) and it8728f (for reference) were
studied and verified against the common code, adding exceptions where
needed.
Change-Id: Ic4d9d5460628e444dc20f620179b39c90dbc28c6
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81310
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Haswell ThinkPads have Nvidia Optimus wired in on some models.
With recent coreboot changes, legacy VGA decode is now disabled
on the iGPU, and the iGPU itself is disabled, when a dGPU is
present. This is a problem on Optimus laptops, because it means
that the Intel GPU would be effectively disabled, when it is the
one that has to handle the framebuffer.
On these boards, you can enable ONBOARD_VGA_IS_PRIMARY so that
coreboot does not disable the iGPU. This is because on Optimus
laptops, the Nvidia GPU is only used for offloaded rendering.
Enable ONBOARD_VGA_IS_PRIMARY by default on these boards.
Change-Id: I8f1e0ca2861d1cc9a9ad41e7c9257aeca1a62a31
Signed-off-by: Leah Rowe <info@minifree.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81645
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
WildcatPoint-LP BIOS spec lists them, and are the same for Lynxpoint.
Change-Id: Iba28c1591affafeb37097084c2fa58128974bd00
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Integer division in C truncates toward zero. When the dividend and the
divisor are positive, one can add half of the divisor to the dividend to
round the division result towards the closest integer. We already have a
macro in commonlib to do just that, so put it to good use.
Tested with BUILD_TIMELESS=1, coreboot images for the Asus P8Z77-V LX2
and the Asrock B85M Pro4 do not change.
Change-Id: I251af82da15049a3a2aa6ea712ae8c9fe859caf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52651
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
tCPDED is always 1, except for steppings earlier than Sandy Bridge D0.
Reduces the differences to MRC.bin.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: I5294173c02f06c601fdb13ed785ee33d7a4e3eca
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79762
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Only write register WMM_READ_CONFIG on Ivy Bridge as it's
reserved on Sandy Bridge.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: Ie14ea06d744b1a8368d32803c6c1ccfb1262532e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79761
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
MRC.bin doesn't write BANDTIMERS_SNB register, so drop the
write. The bits written were targeting a reserved range,
so assume it didn't do anything useful.
Tested on Lenovo X220: Still boots and runs fine.
Change-Id: I920aabd60831c791188af976914553787cc0ff18
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also
initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took
the liberty of alphabetizing all the ISH GPIOs to they're easier to
search through.
BUG=b:316421831
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Make sure that brox device still boots up with this change.
Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously incorrect sets of SATA ports were enabled.
There are no publically available schematics, but I am almost certain
the new values are correct.
The original 0x33 value was carlessly copy pasted, and only enables
ports 0, 1, 4, 5, leaving 2, 3 disabled.
On the SFF, with 0x33 only the first 2 ports worked. I have verified
by plugging in devices under the stock firmware that 0, 1, 2 are the
ones that should be enabled, so setting the value to 0x7 per datasheet.
This was also tested in practice to work.
I don't have an MT, but I was told the two white ports didn't work
with 0x33, so those are most certainly ports 3, 4, hence me setting
the value to 0xf. If the MT's working ports are port 0, 1 on the PCH
this is correct.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I32cb236b8f8140fba4a04c23161363d21741dcbc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81550
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
<string.h> is supposed to provide <stdarg.h> and <stdio.h>
Change-Id: I021ba535ba5ec683021c4dfc41ac18d9cebbcfd2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81853
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/pci.h> is supposed to provide <device/pci_{def,type}.h>
Change-Id: Ia645b8dba8c688187a25916f508593f333821f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81831
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If8be8dc26f2729f55dc6716e6d01e2b801d79e44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ib81c81843a5252e2ead9ce175cea2fa42f0e8152
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Starting with version 18 LLVM puts code and data generated with
-ffunction-section -mcmodel=large inside sections with an 'l' prefix.
This would now also pick up const data in .rodata.
Change-Id: Ie07779ef548337772183ffe2d642f971d8cceae7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Fill GPIO table for Sundance.
BUG=b:327520553
TEST=emerge-nissa coreboot
Change-Id: I53ed5874347006985ca5231d1531fa519088f796
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81613
Tested-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic690a7543f8a1e072650917d7a1e9e3b9dc371a3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: Ib454330c5f584760c47ff0127a720cec5773b922
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: I66265727b68b6ad10722439314b466298dbfff28
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81821
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icd00f30a96c53f70babdcb8a77c4b6c2868619d8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Ie7e36cfa5a09d94bb58f12f9bd262255a630424c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81819
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I46a362270f69d0a4a28e5bb9c954f34d632815ff
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
IoT variants of the RaptorLake FSP support the `PchPciePowerGating` and
`PchPcieClockGating` UPDs, so, remove the preprocessor check that only
enabled it for AlderLake FSPs.
Change-Id: I583a4b257b72f992fdb6390d00e187d04a749177
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81803
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
As 0C is 273.15K you could argue that 2731 and 2732 are both correct.
However, 2732 is deemed as correct both throughout the codebase and in
the ACPI specification[1].
[1]: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/11_Thermal_Management/thermal-control.html#temperature-change-notifications
Change-Id: I845bc750681c7ae6f2d1342b32983b990ce6d296
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81197
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Avoid calling `acpi_device_scope()` and `fast_spi_acpi_hid()` if the
result won't be used. Also, reorder a condition so that compile-time
constants appear first, so as to help the compiler optimize it out.
Change-Id: I42ce55c2978ad9c593c359c5decd5842fb3a97a1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In next phase, craaskov will remove external fivr. Use the board
version to config external fivr for backward compatibility and
show message.
BUG=b:330253778
TEST=boot to ChromeOS, cold reboot/suspend/recovery mode/install OS
work normally.
Change-Id: I9280a86bf78caa10b527a6569ac580dfe1d66f60
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81607
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:333605309
TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0)
is enabled when bit20 is set, and disabled when cleared.
Change-Id: I6e2230715d783ea7108d71699fd19684ce19e2ff
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds a new variant trulo for the baseboard trulo.
BUG=b:333314089
TEST=abuild -a -x -p none -t google/brya
Change-Id: I91157d252ef56c8938bfc08ed0f734c5dc7e614d
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81627
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
