summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-27stage_cache: Disable when APCI S3 is not possibleKyösti Mälkki
Don't consume CBMEM for stage cache when we would never use it. Change-Id: I606e0457ff3085822554c4041fc56f0d28cc9c2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Reimplement mmu_disable() in assemblyJulius Werner
Disabling the MMU with proper cache behavior is a bit tricky on ARM64: you can flush the cache first and then disable the MMU (like we have been doing), but then you run the risk of having new cache lines allocated in the tiny window between the two, which may or may not become a problem when those get flushed at a later point (on some platforms certain memory regions "go away" at certain points in a way that makes the CPU very unhappy if it ever issues a write cycle to them again afterwards). The obvious alternative is to first disable the MMU and then flush the cache, ensuring that every memory access after the flush already has the non-cacheable attribute. But we can't just flip the order around in the C code that we have because then those accesses in the tiny window in-between will go straight to memory, so loads may yield the wrong result or stores may get overwritten again by the later cache flush. In the end, this all shouldn't really be a problem because we can do both operations purely from registers without doing any explicit memory accesses in-between. We just have to reimplement the function in assembly to make sure the compiler doesn't insert any stack accesses at the wrong points. Change-Id: Ic552960c91400dadae6f130b2521a696eeb4c0b1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Switch remaining uses of __ASSEMBLY__ to __ASSEMBLER__Julius Werner
Some arm64 files that were imported from other projects use the __ASSEMBLY__ macro to test whether a header is included from a C or an assembly file. This patch switches them to the coreboot standard __ASSEMBLER__, which has the advantage of being a GCC builtin so that the including file doesn't have to supply it explicitly. Change-Id: I1023f72dd13857b14ce060388e97c658e748928f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Drop dead file stage_entry.SJulius Werner
This file has been dead since commit 7dcf9d51 (arm64: tegra132: tegra210: Remove old arm64/stage_entry.S), I just forgot to remove it. Change-Id: I0dd6666371036ecd42c1b256dbbe22a01ae959b8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-26cheza: Fix Kconfig TPM itemsT Michael Turney
TPM config items added upstream before ready SPI/TPM is not functional on Cheza yet Change-Id: I302e00014dc31279fe2574765763ecdbf326b449 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/27213 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26util/crossgcc: Allow building a new gcc against new binutils with -DPatrick Georgi
With -D, the newly built toolchain isn't installed into $prefix/... but into $DESTDIR/$prefix/... while being built for $prefix alone. This is useful for distributions, but it breaks down when the build host already has the toolchain installed in $prefix without proper build isolation (cf. gentoo): In such cases libgcc etc are built using the new compiler (as gcc's build system is smart enough to state the path explicitly), but that compiler then uses its regular algorithm to determine the path to as, ld, ... That makes it use the tools from $prefix, which might differ in formats (assembly, certain object file flags, ...): nds32le-elf in particular has rather unstable formats still, and so new compilers can't work with old binutils. The approach to deal with this is to take an unused path that's specified by gcc's build system ($out/gcc/$arch/$version) and symlink it to the new toolchain - these explicitly given directories take precedence over the default search path, and so the new binutils are used. Change-Id: Ia9a262e73f56cd486a2ae07422b598c205a03aed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/27241 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26mb/google/octopus: Enable logging of EC wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_mainboard_log_wake_source to enable logging of EC wake events in S0ix. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open Change-Id: Icc8cd3624966ff66d2cf189871e452cf650cec40 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27235 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26soc/intel/apollolake: Enable logging for wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_platform_log_wake_source to enable wake source logging from S0ix on APL/GLK. Additionally, elog.c is added to smm stage. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Power button ============ 59 | 2018-06-25 14:01:11 | S0ix Enter 60 | 2018-06-25 14:01:30 | S0ix Exit 61 | 2018-06-25 14:02:00 | Wake Source | Power Button | 0 =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open =========== Trackpad ================ 67 | 2018-06-25 14:04:20 | S0ix Enter 68 | 2018-06-25 14:04:33 | S0ix Exit 69 | 2018-06-25 14:05:03 | Wake Source | GPE # | 15 70 | 2018-06-25 14:05:08 | Wake Source | GPE # | 66 Change-Id: I005de58c73d00dc9d7e64f1459f6d786792b94db Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27234 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26soc/amd/stoneyridge/southbridge.c: Fix get_index_bit limit checkRichard Spiegel
Limit is the maximum number of bits to be tested, however it's being checked against the number of bytes of uint32_t. when it should be number of bits. Create a macro to provide the number of bits, and use it instead of sizeof. BUG=b:75996437 TEST=Add debug messages to see code passing beyond the check, build and boot grunt, check that it passed the limit check, remove debug code. Change-Id: Id1dfda26d789183b346b20c37fec923d996b80db Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-26opencellular/rotundu: Add mainboard supportHong Gan
Adds Open Cellular rotundu mainboard supports. Working: - 2x Ethernet support - MSATA support - CPU init - Memory init - USB support - EMMC but disabled Not working: - TPM support Create directory structure and Kconfig files for OpenCellular Rotundu and copy sources from intel/minnowmax. Change-Id: I391d4bdd485f4bf5396c764fe3f11d98369593e4 Signed-off-by: Hong Gan <hgan@fb.com> Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/22894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-26facebook/watson: Initial commitDavid Hendricks
This adds another camelbackmountain_fsp derivative, along with a .fmd file for the board. For now it's been tested to build and boot. Change-Id: I9e8804264967c19f6b51fc44575b0db36f600f88 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/25884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-26cbfstool: Update FIT entries in the second bootblockRizwan Qureshi
Once a second bootblock has been added using topswap (-j) option, Update the entries in second FIT using -j option with update-fit command. Additionally add a -q option which allows to insert the address of a FMAP region (which should hold a microcode) as the first entry in the second FIT. BUG=None BRANCH=None TEST= Create ROM images with -j options and update FIT using -q option. example: ./build/util/cbfstool/cbfstool coreboot.tmp create \ -M build/fmap.fmap -r COREBOOT,FW_MAIN_A,FW_MAIN_B,RW_LEGACY build/util/cbfstool/cbfstool coreboot.tmp add \ -f build/cbfs/fallback/bootblock.bin -n bootblock -t \ bootblock -b -49152 -j 0x10000 build/util/cbfstool/cbfstool coreboot.tmp add-master-header -j 0x10000 build/util/cbfstool/cbfstool coreboot.tmp add -f build/cpu_microcode_blob.bin \ -n cpu_microcode_blob.bin -t microcode -r COREBOOT -a 16 build/util/cbfstool/cbfstool coreboot.tmp. update-fit \ -n cpu_microcode_blob.bin -x 4 -j 0x10000 -q FW_MAIN_A Also try the failure scenarion by providing invalid topswap size. Change-Id: I9a417031c279038903cdf1761a791f2da0fe8644 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/26836 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26cbfstool: add an option for creating a topswap bootblockRizwan Qureshi
Add an option '-j' which takes the size of topswap boundary. This option serves both as a bool and a size for creating a second bootblock to be used with topswap feature in Intel CPUs. '-j' is also used in conjunction with add-master-header to update the location of cbfs master header in the second bootblock. BUG=None BRANHC=None TEST=add bootblock entry to the image with -j option specifying different topswap sizes and also use the -j option for add-master-header. Change-Id: I3e455dc8b7f54e55f2229491695cf4218d9cfef8 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22537 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-25util/abuild: Enable abuild to compile a single variantFurquan Shaikh
There are many boards in coreboot which support multiple variants. When abuild is used to compile a single target, it builds all its variants. If a target has 5 variants, then abuild takes nearly 10x the time to compile all variants of the target. This change adds an option -b/--board-variant to enable abuild to compile only a single variant of the target. TEST=Verified: 1. abuild builds all variants of the target if -b option is not provided. 2. abuild builds a single variant if -b option is provided. 3. abuild prints appropriate error message if invalid variant name is provided. Change-Id: I3781568c6409c5ec2610a8386a21d86037428e7f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27215 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
Now that sconfig is able to support variant-specific override trees, this change updates octopus boards to use this feature. Following devices are moved from baseboard devicetree to variant specific devicetree: 1. Touchscreen 2. Trackpad 3. Digitizer 4. Audio codec BUG=b:80081934 TEST=Verified that the right devices show up in static.c for each variant. Change-Id: I8df0cdf4dbcd7613aa4ef4042c272eca2915da9e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27219 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Get rid of ops from struct deviceFurquan Shaikh
"ops" field was used in device structure only to add default_dev_ops_root for root device. It was always set to NULL for all other devices. This change gets rid of ops field from struct device and instead hardcodes default_dev_ops_root in pass1 for root device. BUG=b:80081934 TEST=Verified that static.c generated with and without this change is exactly the same. Change-Id: I0848788610c2ed27274daf4920de3068a9784d4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27209 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Add support for overriding base tree properties/nodeFurquan Shaikh
This change adds support to allow variants to override the devices and properties in base device tree by providing an override device tree. It works as follows: 1. Both base and override device trees are parsed from provided input files. 2. Walk through the trees in lockstep fashion using depth-first traversal checking if a node in override tree has a matching node in base tree. - If matching node is found, then update the properties of base node using the override node. Continue walking the children of the nodes. - If matching node is not found, then copy the entire override subtree of the node under the current base parent. In addition to that, chip instance pointers of the nodes in override tree need to be updated if they were pointing to the override parents chip instance. Since chip always expects a device to be present, it leads to a side-effect that overriding chip registers requires that a device is always provided for the chip in the override tree as well. BUG=b:80081934 Change-Id: I6604e4f8abe3fc48240e942fea32da96031e1e46 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27206 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25Kconfig: Add new config for OVERRIDE_DEVICETREEFurquan Shaikh
This change adds a new config option OVERRIDE_DEVICETREE that allows variants to provide an override devicetree file to override the registers and/or add new devices on top of the ones provided by baseboard devicetree using CONFIG_DEVICETREE. BUG=b:80081934 Change-Id: Ica046b7e0d70d0f1e8d94da714d1e62032277916 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Enable parsing of override device treeFurquan Shaikh
This change allows sconfig utility to accept an extra optional parameter to specify override device tree that can be used to override the properties or add new devices in addition to that provided by base device tree. This is helpful for variants that share most of the devicetree but have to override certain registers or add some devices which might not be applicable to base devicetree. In order to support the override devicetree, following changes are made in this CL: 1. override_root_dev and override_root_bus are provided. 2. main() function is updated to accept an optional argument. 3. If override device file is provided, then parse_devicetree is called for override_devtree as well. This change in itself does not provide the override feature. It is only a small step towards the final goal. The override devicetree parsed by sconfig is currently unused. BUG=b:80081934 Change-Id: I477e038c8922ae1a9ed5d8bf22a5f927a19a69c7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-25mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
This patch updates DPTF parameters for Octopus baseboard. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I1456b7b9ee9e02491c66b0709c710e1a7ec08cc5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-25nb/lenovo/t400: Enable libgfxinitArthur Heymans
Change-Id: I243c22c83a5575c2e1500cc869c41691c4fba415 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/lint/checkpatch_json: Fix checkpatch output keyword match stringNaresh G Solanki
From checkpatch output, look for keywords starting with 'ERROR:' & 'WARNING:' . Also check for keywork ': FILE:' instead of the same without the colon (:). BUG=None BRANCH=None TEST=Check if patch https://review.coreboot.org/#/c/coreboot/+/22537/21 is processed & json output is generated properly. Change-Id: Ib690ab34a1ffabc4f83642634fd34beea16a64dc Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/27170 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25sb/intel/common/firmware: Enable me_cleaner for NehalemNicola Corna
Recent patches in coreboot have fixed the freeze issues related to the use of me_cleaner on Nehalem. However, at least on the Lenovo X201, with me_cleaner some PCIe devices (like the SATA and USB controllers) disappear. In particular, setting the AltMeDisable bit ("-S" or "-s" flag) makes them disappear completely, while unsetting it makes them disappear only during cold boots. This kind of behaviour was already observed by Youness Alaoui on the Purism Librem laptops ([1]), and it seems related to some required board-specific PCIe configuration in the ME's MFS partition. For this reason, on the Lenovo X201, "-w EFFS" has been added to the me_cleaner arguments, which whitelists the MFS-equivalent partition for ME generation 2. This fixes all the issues, and the PCIe devices work as expected. [1] https://puri.sm/posts/deep-dive-into-intel-me-disablement/ Change-Id: Ie77a80d2cb4945cf1c984bdb0fb1cc2f18e82ebc Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/27178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-25intel/skylake: nhlt: Add capture config for echo ref stream for Max98373 CodecSathyanarayana Nujella
During Speaker playback, quad Channel I/V feedback data is captured from SSP0 Rx. Out of these 4-channels, Stereo V-Sense data needs to be given as echo ref stream. So, adding stereo capture config to max98373_capture_formats. BUG=b:110074225 TEST='Audio playback and Capture Stereo echo ref data' Change-Id: I6fe619ece94d5011caffe37ef10b48f956938db9 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-24drivers/i2c/alps: Get rid of i2c/alps driverFurquan Shaikh
i2c/alps driver implementation is an exact copy of the i2c/hid driver with only the addition of ALPS0001_HID. This can be supported by the i2c/hid driver using the hid field in devicetree which is what glkrvp mainboard does. So, this change removes the i2c/alps driver which is anyways unused. Change-Id: I60761c384f3d800532b2b346272da7be28b77acd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-23mb/asus/p8h61-m_pro: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23nb/intel/i945: Remove dead codeElyes HAOUAS
Regarding "Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family", Document Number: 307502-005, page 91, if Channel B is empty, all of the C1DRBs are programmed with the same value as C0DRB3. Mobile 945 express chipset datasheet doesn't mention this specific case. Change-Id: Ic26103aac7f920e5696b445e125d33405df4f43b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27204 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23soc/intel/cannonlake: Disable UART_DEBUG by defaultSubrata Banik
This patch ensures serial debug is not enabled by default on Cannonlake platform. Change-Id: Id925c8c73971a027e45ea3c61e878f134bc9feff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/octopus: Update GBB_FLAG_DISABLE_EC_SOFTWARE_SYNCFurquan Shaikh
Move GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC under each variant config and select it for bip and fleex only. Functional change in this CL is that EC SW sync will be enabled for phaser. BUG=b:110523400 Change-Id: If6f37c6b2ee71130b9ed5b10ce92fb23fa1c39fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22sdm845: increase SRAM for bootblockT Michael Turney
Bootblock has grown beyond 32K, grow to 40K Change-Id: Iedc52151e223ebf4ff5b35a419b5378a6f1c661b Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-22libpayload: cheza - fix config for chromium chroot buildT Michael Turney
Add CONFIG_LP_CHROMEOS to configuration file Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22cbfstool/fit.c: Fix for older CPUs without total_size in mcu_headerArthur Heymans
Some older CPUs have a fixed size of 2048 bytes for microcode total size. Change-Id: Ia50c087af41b0df14b607ce3c3b4eabc602e8738 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27090 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/cannonlake: Remove DMA support for PTTSubrata Banik
Alternative buffer communication support for PTT is no longer needed for CNL onwards and coreboot does not need to reserve additional 4KiB memory for PTT support. Change-Id: I11993cef77fd5e879eedabc1ed344f91f8257c90 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21inteltool: Add PCI IDs for the C220 PCH seriesqeed
Adds missing PCI IDs to allow tool to dump the C220 PCH (8 series) southbridge. Intel Document 328904 is the datasheet for this PCH. Change-Id: I07a8f2e9cb0ee8677c8fe2c51881147ed81c1a35 Signed-off-by: Quan Tran <qeed.quan@gmail.com> Reviewed-on: https://review.coreboot.org/27168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-21tianocore: Fix RPM package namePatrick Rudolph
The packge uuid-devel doesn't provide the required files, but libuuid-devel does. Change-Id: I61d537e4f1fca0d7172c129a75e13aa58452763f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21soc/intel/apollolake: unify definition for spi base addressBora Guvendik
Use SPI_BASE_ADDRESS instead of PRERAM_SPI_BASE_ADDRESS like big core in order make common code implementation straightforward. Change-Id: Ibcb013fc95de29234253e89c9ca100cc468d44f6 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/27097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21soc/intel/common: Make infrastructure ready for Intel common stage filesSubrata Banik
Select all Kconfig belongs into Intel SoC Family basecode/stage files and include required headers from include/intelbasecode/ files. BUG=None BRANCH=none TEST=Code is compiling with cannonlake configurations and also booting on cannonlake RVP. Change-Id: Iac99b4346e8bf6e260b00be9fefede5ad7b3e778 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-21sb/intel/i82801xx: Use common RCBA MACROsArthur Heymans
Change-Id: I61fb3b01ff15ba2da2ee938addfa630c282c9870 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21sb/intel/common/rcba_pirq.c: Use common RCBA acces MACROsArthur Heymans
Change-Id: I2fe8d8388cb96e42af4f9be251a41cceeb2e4710 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27042 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21sb/intel/common: Make RCBA manipulation MACROs commonArthur Heymans
No Change in BUILD_TIMELESS. Change-Id: I634526269d45ebdc6c31cdc28d9ec846b397211d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21Revert "sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location"Arthur Heymans
In the end it does not look like RCBA register offsets are fully compatible over southbridges. This reverts commit d2d2aef6a3222af909183fb96dc7bc908fac3cd4. Is squashed with revert of "sb/intel/common: Fix conflicting OIC register definition" 8aaa00401b68e5c5b6c07b0984e3e7c3027e3c2f. Change-Id: Icbf4db8590e60573c8c11385835e0231cf8d63e6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21util/abuild: Fix building when not in coreboot root dirArthur Heymans
Change-Id: Ibe54096f275a05bda745ae2cc76c0109281c0c4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21soc/amd/stoneyridge/southbridge.c: Store PM related registers in cbmemRichard Spiegel
PM registers used for generating SWS values are being stored in a static variable within southbridge.c. In order to have it available for any source involved in building the platform, move the storage to cbmem, using id CBMEM_ID_POWER_STATE. Also add a variable that informs from which state the system is waking from, extracted from register ACPI_PM1_CNT_BLK. This variable will later be useful in detecting failed S3 resume. BUG=b:80119811 TEST=Add code to print SWS parameters and state it's waking from. Build and boot grunt, suspend and resume, check output for valid values. Remove the print code. Change-Id: Ib27a743b7e7f8c94918caf7ba5efd473f4054986 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27109 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21drivers/ati/ragexl: Remove dead codeArthur Heymans
Is unused in the tree. Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22132 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21google/lars,lili: Add SPD mapping for Hynix 8GB configren kuo
Upstreaming Chromium commit 0bc6c43: Lili: Update Memory IDs TEST=Build and boot up on lili board Original-Change-Id: I6da1e97820b1bf2e751102384eed07236143fe2b Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/956782 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Icf6588582da3b4a7861bced539d51a914b011dc4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27135 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21payloads/external/GRUB2: Use pkg-config over freetype-configNico Huber
`freetype-config` is gone and was obsolete for a long time. Change-Id: Id3058e55b1630f43225d3cd1ad91801c4085874f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21mb/lenovo/t520: Add Dual Graphics CMOS supportNico Rikken
Adds the CMOS option for Dual Graphics, as is present in more Lenovo models already. Enabling this option ensures that the NVIDIA GPU is powered. More PCI devices can be observed when activating this setting. It was verified on a W520, also by loading a VGA option ROM and achieving a working Dual Graphics system. The CMOS default has been kept to 'Integrated Only', as the usage of Dual Graphics requires an option ROM and drains the battery more quickly. Change-Id: I41ccabd4554ca019684edd6f8b1c23679212c59f Signed-off-by: Nico Rikken <nico@nicorikken.eu> Reviewed-on: https://review.coreboot.org/26114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21soc/intel/{skl,kbl}: ensure C1E is disabled after S3 resumeCole Nelson
C1E is disabled by the kernel driver intel_idle at boot. This does not address the S3 resume case, so we lose state and C1E is enabled after S3 resume. Disable C1E for SKL and KBL. This gives a coherent state before and after S3 resume. TEST='iotools rdmsr cpu 0x1fc'. Returns the same value after boot and S3 resume with bit [1] set to zero (0x20005d). Change-Id: I1343f343bfac9b787f13c15b812c0a201dcccb38 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/27125 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21soc/amd/common: Always set GetBiosCalloutKyösti Mälkki
The entire StdHeader field is really supposed to be forked from a template for each entry into the AGESA API. Current code assumes only Callout would be relevant, which is not quite the case. Change-Id: I0cc66d01d62fa8dc6bb7c9f9fab6fa4753827554 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mediatek/mt8183: Remove DRAM_DMA sectionTristan Shieh
DRAM_DMA section is used for the special SPI NOR controller on legacy SOC. Remove it since no driver need it currently and we don't have the special SPI NOR controller on mt8183. BUG=b:80501386 BRANCH=none TEST=Boots fine on Kukui Change-Id: I6ba0757adbf4f1f8d2688e5ab1a36007e4e0d0fd Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-21mediatek/mt8183: Add watchdog timer supportTristan Shieh
Using common watchdog timer (WDT) code for reset. Set up watchdog timer in mtk_wdt_init() to get reset status and disable auto-reboot. Link common do_hard_reset() to support hard reset. BUG=b:80501386 BRANCH=none TEST=both mtk_wdt_init() and do_hard_reset() work on Kukui. Change-Id: I4be3a133dbb8a64604133cefb0c5f02d01afd0d4 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27026 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mediatek: Move watchdog timer code to a common directoryTristan Shieh
Move watchdog timer (WDT) code which can be reused into a common directory under soc/mediatek. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Icbeb04f775c3c0fdc18dd198df8591f5c4b6ddce Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27025 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mediatek: Share watchdog timer code among similar SOCsTristan Shieh
Refactor watchdog timer (WDT) code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I745c2f204924d9eee1941c0f3e9b6ba45cfb1958 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27024 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable camera power and release resetCaveh Jalali
This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable touchscreenCaveh Jalali
This adds the necessary config to enable touchscreen sensor in linux. BUG=b:110286344,b:110286345 BRANCH=none TEST=verified touch functionality using eval board Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: support i2c-hid trackpadCaveh Jalali
We plan to use i2c-hid compatible trackpads on atlas, so this switches the trackpad config to i2c-hid. BUG=b:80662079 BRANCH=none TEST=used trackpad to verify motion tracking Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27126 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cbSeunghwan Kim
This change defines SAR sensor device into devicetree.cb. Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio. BUG=None BRANCH=poppy TEST=Verified SAR sensor device is loaded by driver in Chrome OS Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27149 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5Seunghwan Kim
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage. BUG=None BRANCH=poppy TEST=Verified the leakage is gone after update coreboot Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKUSeunghwan Kim
For supporting new SKU, we need to override GPIO table and device configuration. The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it. BUG=b:80052672 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27147 Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-20fsp_broadwell_de: Add uncore ASL in common locationDavid Hendricks
This patch adds a file for uncore ASL code that is common among Broadwell-DE mainboards but is currently copy + pasted in each of their dsdt.asl files. This is only for clean-up purposes. It is unclear if the code itself is really necessary, but until we can do further investigation and testing it will be left in. Change-Id: I188e5e46dfa7c2ed3991fb97f2c1b5e062e2212d Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/27155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-20nb/intel/e7505: Leave ROM as un-cacheable in postcarKyösti Mälkki
Collected timestamps indicate LZMA decompression of ramstage is 4x slower when ROM is marked WP-cacheable, in contrast to having ROM as US. A simple copy WP->WB with uncompressed ramstage also appeared to be twice as slow as UC->WB copy. It should be noted that if POSTCAR_STAGE was removed from build, un-lzma takes 130 seconds instead of 45 milliseconds. Change-Id: I2cf995395ef2d303ad0bc044dbfa160990a705d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-20aopen/dxplplusu: Add romstage timestampsKyösti Mälkki
Change-Id: Ic6e2a350a976a3fcb421d47a0bf5600df994edc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-20mb/google/octopus: Configure EC_IN_RW correctlyFurquan Shaikh
This change fixes the following issues with EC_IN_RW signal: 1. EC_IN_RW is an input signal to the SoC. Configure it accordingly in GPIO table for baseboard and bip. 2. GPIO_EC_IN_RW is passed in coreboot tables so that payload can re-sample the GPIO at runtime. BUG=b:110084012 TEST=Verified that EC_IN_RW signal is read correctly in depthcharge. Change-Id: I1c5f5b4b914ced98e89a571dc398df5ba1fe8460 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-06-20mb/google/octopus: Enable Synaptics touchpad devicewuxy
This change adds Synaptics device to phaser project. BUG=b:110236590 TEST=emerge-octopus coreboot chromeos-bootimage reflash the coreboot to DUT,make sure the Synaptics Touchpad can work. Change-Id: Icc1e8c35a9de54ed04187fcf219a72a592d3bd81 Signed-off-by: Xingyu <wuxy@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27159 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19payloads: Add LinuxBoot payload in u-root modePhilipp Deppenwiese
* Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19lib: Add FIT payload supportPatrick Rudolph
* Add support for parsing and booting FIT payloads. * Build fit loader code from depthcharge. * Fix coding style. * Add Kconfig option to add compiletime support for FIT. * Add support for initrd. * Add default compat strings * Apply optional devicetree fixups using dt_apply_fixups Starting at this point the CBFS payload/ can be either SELF or FIT. Tested on Cavium SoC: Parses and loads a Linux kernel 4.16.3. Tested on Cavium SoC: Parses and loads a Linux kernel 4.15.0. Tested on Cavium SoC: Parses and loads a Linux kernel 4.1.52. Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-19Documentation: Add cavium SoC and mainboardPatrick Rudolph
* Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-19lib: Raw import FIT parserPatrick Rudolph
Import from https://chromium.googlesource.com/chromiumos/platform/depthcharge Coding style and coreboot integration will be done in a separate commit. Change-Id: Iee56db328d7eeffb0eaf829841243b0b9195c199 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-19lib/prog_loaders: Move argument selection into selfloadPatrick Rudolph
Set the payload argument in selfload, as other (non self) payloads, are going to set a different argument. Change-Id: I994f604fc4501e0e3b00165819f796b1b8275d8c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25861 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18mb/google/poppy/variants/nautilus: Correct USB OC pin configurationSeunghwan Kim
Due to schematic, we need to correct USB OC pin configuration. - OC0 for Type-C Port 1 - OC1 for Type-C Port 0 - OC2 for Type-A Port - OC3 to NC BUG=NONE BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-18mb/google/octopus: Enable Synaptics touchscreen deviceFurquan Shaikh
This change adds ACPI properties for SYTS7817 device. BUG=b:110013532 Change-Id: Ifdec4efce169c066f212a393df21089d43d8e4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
This creates a fleex variant for octopus. Nothing is set in the variant files here; everything is picked up from baseboard. BUG=b:110085182 TEST=None Change-Id: Ia8b8bb757f67bea997b7f43489c38cac62f7682d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27105 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18cbfstool: Use endian.h and functions from commonlibWerner Zeh
The endian conversion function be32toh() is defined in src/include/endian.h, however this file is not used for cbfstool compilation. Currently the one provided by the host is used and if the host does not provide this endian.h file, the build will fail. However, we do have endian conversion functions in commonlib/endian.h which is available for cbfstool compilation. Switch from be32toh() to read_be32() in order to avoid relying on a host provided include file. We use functions from commonlib/endian.h already in cbfstool. Change-Id: I106274cf9c69e1849f848920d96a61188f895b36 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/27116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-17nb/intel/i440bx: Switch to POSTCAR_STAGEKyösti Mälkki
Boot tested on asus/p2b-ls and p2b-ds. Change-Id: I0154f1d120bef3b45286fb4314f0de419cd8341e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/26821 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17nb/intel/i440bx: Move to RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: I96f42d5dc10d36855bdca64d1406a254250ee5b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26820 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17cpu/intel/car/p3: Use variable MTRR countKyösti Mälkki
Change-Id: I323426e0d9ddee1be72d15702fee4f92c7b348cc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17cpu/intel/slot_1: Switch to different CAR setupKyösti Mälkki
This moves CAR stack under variable MTRRs and removes old CAR code that used complex fixed MTRRs and placed stack in low memory. Change-Id: I75ec842ae3b6771cc3f7ff652adbe386c03b9a5f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/26586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17cpu/intel/car: Remove obsolete filesKyösti Mälkki
These CAR init files are no longer used. The _ht variant will be used as basis for P3 CAR using with variable MTRRs so we only move file. Change-Id: Iace8762c11e2f282df1850f7be170c841d4881f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27084 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17nb/intel/nehalem: Fix DEVEN definesPatrick Rudolph
The DEVEN defines are wrong, but weren't used at all. Fix them as they are needed by the hybrid_graphics_driver and use the defines instead of magic values. Tested on Lenovo T410: The IGD turns on with the correct value. Change-Id: Idf9fc0115de5c72f7d5d88cbb09ae1d2fee0afd0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17mb/pcengines: Remove unneeded includes and dead codeElyes HAOUAS
Fix coding style. Change-Id: Id13c0ee284293c0c06d46c75c850bc7e81cfc1f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-17nb/intel/x4x: Issue a hard reset with empty MRC cache on warm resetArthur Heymans
The dram controller cannot fully initialize the dram on warm reset (receive enable calibration consistently fails) therefore requiring cached timings. This option is mostly useful when rebooting after having flashed a new rom which overwrites the mrc cache region. Change-Id: I405c0eca076fe081641ede9a670f734c98cbf8fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-15mainboard/google/Kahlee: All variants identify as Grunt in SMBIOSMartin Roth
All Grunt variants should identify as grunt in SMBIOS so that they're recognized correctly as a unibuild Grunt variant. BUG=b:110244268 TEST=Careena identifies as grunt Change-Id: Iaf254149fbec9551d9220018d6d6a0a1be741538 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27117 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15Documentation: Add SandyBridge NRI feature matrixPatrick Rudolph
Change-Id: I69b014430802de132c8d9b6c8409bc762b995468 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27093 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ixHannah Williams
This pin does not have a native function for eSPI. Nonetheless if we use eSPI, it should be configured as a GPIO and kept unconnected to allow S0ix entry. Also removed initialization of LPC pins in mainboard code as they are already initialized in chipset code. The settings fpr LPC pins in chipset code were updated to those that were previously in mainboard code and have been validated on LPC flavor of Geminilake RVP. BUG=b:79251613 BRANCH=none TEST=From kernel prompt in bip, type powerd_dbus_suspend. Check on EC console that SOC enters S0ix. Change-Id: Ie0c1013fee638a3b7a91469736efc0c25a1597fa Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23742 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15util/cbfstool: Support FIT payloadsPatrick Rudolph
In order to support booting a GNU/Linux payload on non x86, the FIT format should be used, as it is the defacto standard on ARM. Due to greater complexity of FIT it is not converted to simple ELF format. Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'. The payload is included as is, with no special header. The code can determine the type at runtime using the CBFS_TYPE field. Support for parsing FIT payloads in coreboot is added in a follow on commit. Compression of FIT payloads is not supported, as the FIT sections might be compressed itself. Starting at this point a CBFS payload/ can be either of type FIT or SELF. Tested on Cavium SoC. Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 16:30:58 +0000