Age | Commit message (Collapse) | Author |
|
Change to use cbmem_recovery() to wipe CBMEM region and reset
ACPI wakeup if CBMEM TOC was not found.
Change-Id: Ic362253eaa00bd442d4cc0514632f9096e20bfa6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change to use cbmem_recovery() to wipe CBMEM region and reset
ACPI wakeup if CBMEM TOC was not found.
Change-Id: I6648570d76b5c137f50addcc5bce9c126d179c65
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4672
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The replacement function confirms CBMEM TOC is wiped clean on power
cycles and resets. It also introduces compatibility interface to ease
up transition to DYNAMIC_CBMEM.
Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4668
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
The board was missing cbmem_initialize() call in romstage. Selecting
EARLY_CBMEM_INIT implies this is done in romstage.
Change-Id: I9ec93f89fe4cbb9e729532be36db601b6e62bca6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4667
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: I450f78cce7172fd2dee66dc81b4f33e07c1aff09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4664
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Inspired by commits ac6ea04b and 4560ca50 that enabled this feature
for lenovo/x60 and lenovo/t60 with i945 chipset.
Change-Id: Ia04f58b8c3769b5734708c6a338bb80c13c5aeba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3994
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Now it boots up to message "Could not find payload".
Change-Id: I07ddca7046492f7e0dec15a8ea00c2870b09ee67
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4754
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
probably a problem in MRC:
- EHCI output failure after sysagent
- no S3
- no MRC cache
- MRC needs watchdog
- less MTRR could be used by some memory map optimisations
Not tested:
- dock (probably doesn't work)
- msata (probably works)
- wwan (probably works)
- mini displayport (probably works)
Blobs:
MRC
VGA Oprom
Change-Id: I5bdb9372971f48e048848d57b6c924b79782dbde
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4679
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The LARCHIVE header isn't a string (not null terminated).
It confused coverity, and while it should be obvious that
we're not aiming for any null bytes after the header, we
can also just not pretend it's a string.
Change-Id: Ibd5333a27d8920b8a97de554f1cd27e28f4f7d0a
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4088
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Improve clang compatibility by dropping an opaque hack
The section attribute was only ever meant for specifying
section names, not their properties - otherwise they would
have provided section(name,attribute,class) instead of only
section(name).
The hack to add attribute and class to the name, and commenting
out the "real" definitions inserted by the compiler (see the
terminating "#"), is refused by clang developers.
This is a cleaner implementation in that the section is first
declared with its properties, then used later-on, expecting that
later conflicting declarations are ignored.
It can still break in two ways:
1. The assembler or linker could complain about a section declared
in two different ways.
2. The assembler could just use the latest declaration, not the first,
to determine the section's properties.
I won't sort these out unless they actually happen.
Change-Id: I4640b0fc397b301102dde6dc3ea1a078ce9edf1c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Needed for brightness control for Lenovo X230
Change-Id: Ib6d127d2e050671dd402c31af06ff4726f65156c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4618
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
[[ is a bashism.
Change-Id: Ief7c43fc1740db32ed97850a415b0c256b5bb35a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4764
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Do not expose options that are unsupported by the board. I tried for
a couple of days to see why hyperthreading wasn't working. It's not
supported by the CPU. The same applies to the baud_rate option. It
makes no sense to expose it to userspace via nvramtool.
Change-Id: I89b91820616d92fb4db20bf77f4b7f48a70353d5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4697
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It's useless and makes clang unhappy.
Change-Id: If256b99aebabd87df30a3a078c5804330b82989b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4713
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Doesn't have a visible effect currently but it's better if those
bindings are correct.
Change-Id: I0f1a468e59429b14db139cc48e1e68c0e1841300
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4645
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The unusual construction ls + grep + while read fails
for unknown reason. Use standard for x in * consruction
instead.
Change-Id: Ibcdf5e18543587f71a605bae2d0df72b6a286a5b
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4757
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I42c77d03b6a5f8ef88f1276de543bb3fc55467af
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4755
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Based on info from old page
Change-Id: Ibd07b5904569e510de249e4216875438a855ff57
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4746
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ie3d1be1e51df458cd8b55230c888f032ab705ef8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4743
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I69e99e2a1bf9b890281caaf0633f91850d923241
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4747
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
On bot, stderr is unmonitored, so it make no sense to stop with an error.
Instead use some sensible guesses.
Change-Id: I6292e9fbf446b751471b95f86e7515c6680bddf3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4748
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Values get space-padded by curses and then enum search fails to match them.
Rtrim to compensate for curses.
Change-Id: Iecf095f21cfade9425eaa039b67625615eb80481
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4692
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Without it payloads that need curses fail to build.
Change-Id: I4533238b547e4c2d9e0778fb7d314db35a9559df
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4689
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I5cf34e14f6e11c03822a6ce6226365c76e0f6875
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4742
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
It resulted in garbage in upper bytes of numeric options.
Change-Id: I5e5d8b770ed93c7e8a1756a5ce32444b6a045bac
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4691
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Code is using it...
Change-Id: I6894b45cbbf70c8e7ce37ce18d93cadf0ea9fbfc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4649
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ia13e54f35215d07d93f93887eef5aeb91ffb874d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4741
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I10872c31baa0d73ce55d1738a0643fda2555c62e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4740
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8a7bf265ebb30dd5997f93729a0329e74f463a23
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4739
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If9d26b9e4cb1895452316c9cf2e8c75a01cfd7c2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4738
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Overrides were to have names in line with wiki but names derived from the
tree are better in some cases.
Change-Id: Ic805ba9a3b9c7f926dc9ef27f8673f2c18e9af34
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4737
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Original link is dead.
Change-Id: I56e975ee411f7290c12aad501f490ccc5dedaf05
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4736
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I4a3ed7e9b6aaec8aba8ffc47eafdbcca31e4c700
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4734
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Info supplied by: idwer
Change-Id: I3086e8118a721ded33c578c6c82e20642ef9d776
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4733
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Overrides were to have names in line with wiki but names derived from the
tree are better in some cases.
Change-Id: Iff3c27db1a4936b03f976c82d872589e41df0c90
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4735
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I7bfe19eb800729713a549dc0396765a9785e11b1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4732
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I5249d86188845e1104d25163faa5010b943e707a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4731
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Based on info from wiki.
Change-Id: Iebd799abe48550c4df55632b8177d845df7d9a7d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4706
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
board_info.txt is a file to be used by board-status to add
some useful info to the generated table like flash chip type.
This series is autogenerated from wiki page Supported_Motherboards.
Change-Id: Ie2bda900713ef4883134477163320936c84c34f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4701
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I16e027b78dc65538d8f0cd6f5e57bbdfc10b7169
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4729
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
It's ugly and not needed anymore.
Change-Id: I98301c75684813a217c3ca0435a15b6e4ffef558
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4730
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Original actually meant j7f[24] which without square brackets
became confusing. There is no such board as j7f24.
This is a prerequisite to adding j7f4* as cloned boards
Change-Id: Ia7708b13ac4141ef788183c7817fce1366919936
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4728
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I4f297e7a7332acc6ceda6a99981599e3a372b696
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4727
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I87e2768de6728658a87729998648514824d79fd6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4726
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ieab7d46177eb92393914f8cb055675df00a9a375
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4723
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I2f775e8919cfd35bbcf5910a8b25776e833ee100
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4722
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I78f94238d7931c8b41e63174220ec4392108f4ce
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4699
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Now that CBFS microcode no longer requires a NULL termination, remove the
dummy terminators from all microcode blobs. This also enables microcode
blobs from different CPU models to be linked in the same
cpu_microcode_blob.bin without the terminators getting in the way.
Change-Id: I25a6454780fd5d56ae7660b0733ac4f8c4d90096
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4506
Tested-by: build bot (Jenkins)
|
|
The sequence to inject microcode updates is virtually the same for all
Intel CPUs. The same function is used to inject the update in both CBFS
and hardcoded cases, and in both of these cases, the microcode resides in
the ROM. This should be a safe change across the board.
The function which loaded compiled-in microcode is also removed here in
order to prevent it from being used in the future.
The dummy terminators from microcode need to be removed if this change is
to work when generating microcode from several microcode_blob.c files, as
is the case for older socketed CPUs. Removal of dummy terminators is done
in a subsequent patch.
Change-Id: I2cc8220cc4cd4a87aa7fc750e6c60ccdfa9986e9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4495
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
One of arguments to cbfs_get_file_content was missing.
Change-Id: Icb4ef26f18d63c133bc32f1c62a524edee0621ea
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4696
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Show POST codes on a PCI device: implement hudson_pci_port80().
Remove the comments that use pci_locate_device():
using the code found in the comment seems to break booting.
This shares much code with sb600/sb700/sb800,
however the deduplication work needs to be discusses somewhere else
than in this review board.
Tested on an Asus F2A85-M.
The contribution is (C) by Rudolf Marek.
Change-Id: I54fb1dcb0614452c775ed70d867ab44ff263a61a
Author: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4559
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
`Start_vid`
When adding support for PSS object generation for AMD pre Family Fh CPUs
(199c694f) the function `pstates_algorithm` was copied and adapted, but
`Start_vid` is not needed anymore as a static table is used. I’d remove
the variable, but Ron Minnich requested to leave it there for
documentation purposes. So just comment it out.
Change-Id: I3002951d168cade6461941c16d78373c47792e13
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4036
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
On X230 2 real chips (8 + 4) are merged into one virtual 12M chip.
Change-Id: I49c251b1777fc9edccebc4a204b9c4a087bf2a8e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4688
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Delay the copying of MRC cache data from CAR to CBMEM until after
sdram_initialize() returns and cbmem_initialize() completes.
Calling cbmem_initialize() twice would complicate the decision logic
of when CBMEM area needs to be wiped clean.
Change-Id: Ic59e94cb2436293efc47b52f7418f5dbf76c714a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4666
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Required for MRC cache and for HAVE_ACPI_RESUME to work.
Change-Id: I7d48b167bd581d7c14ca50bd46e74be0133cecfb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4665
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Only have one definition of get_top_of_ram() function and compile
it using __SIMPLE_DEVICE__ for both romstage and ramstage.
Implemented like this on intel/northbridge/gm45 already.
This also adds get_top_of_ram() to i945 ramstage.
Change-Id: Ia82cf6e47a4c929223ea3d8f233d606e6f5bf2f1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3993
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
CBFS could start from below 4MB, and should be cacheable for the
purpose of early microcode update and CBFS search for romstage file.
Change-Id: Ia2a1c6e5fdcc3201fafc8cf5c841cebbbf0b30c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4626
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be
set with values that are not power of 2. The region programmed
as WB cacheable will include all of ROM_SIZE.
Side-effects to consider:
Memory region below flash may be tagged WRPROT cacheable. As an
example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB.
Since this can overlap CAR, we add an explicit test and fail
on compile should this happen. To work around this problem, one
needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and
define a smaller region for WB cache.
With this change flash regions outside CBFS are also tagged WRPROT
cacheable. This covers IFD and ME and sections ChromeOS may use.
Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4625
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
On X230 MRC fails if cache is passed to it. Until better solution is found
do not create mrc.cache
Change-Id: I7e70ebe3c4879e7ab33a9c95a0c9e40408ff5ca4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4680
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This fixes a number of potential issues, such as generating a build
failure if the bootblock is too large, and making sure romstage and
ramstage cannot overlap in memory.
Change-Id: I4ca9ad097b145445316bcd962e007731b08a7fda
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4687
Tested-by: build bot (Jenkins)
|
|
This completes the romstage for the cubieboard.
Change-Id: If3272d8a9e414f782892bc41b34b5e2dece5d7e1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4686
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I5a3bb3220aeefdd6822a7dbecf210ff77095dad6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4685
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ifb41050e729a0ce314e4d4918e46f82bc7e16bed
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4684
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Representing a memory location as an unsigned long is specific to
32-bit architectures. It also doesn't make sense to represent a length
assumed to be positive as a signed integer. With this change, it is no
longer necessary to cast a pointer to unsigned long when passing it to
hexdump.
Change-Id: I641777d940ceac6f37c363051f1e9c1b3ec3ed95
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4575
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I93bac9bf94f5bafcd3ff0c3d5763b31d3ee9959b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4640
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I3ffe225b78f88c3c2d3a15292c43009e69413afb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4638
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
On x86, log2() is defined as an inline function in arch/io.h. This is
a remnant of ROMCC, and forced us to not include clog2.c in romstage.
As a result, romstage on ARM has no log2().
Use the inline log2 only with ROMCC, but otherwise, use the one in
clog2.c.
Change-Id: Ifef2aa0a7b5a1db071a66f2eec0be421b8b2a56d
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4681
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Up until now, we relied on mksunxiboot to prepend the header which
makes coreboot.rom bootable on Allwinner SoCs. If that tool was not
present, the build silently failed.
Integrate this tool into our util/ package, so that we do not have to
rely on mksunxiboot being in PATH.
Our version of mksunxiboot also eliminates some limitations of the
original tool, so we no longer have to use 'dd' to limit the file
size.
Change-Id: Id5a4b1e2a3cb00cd1d6c70e6cbc3cfd8587e8a24
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4656
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Alphabetize the sources for each stage (bootblock, rom, ram), and
include twi.c in both romstage and ramstage.
Change-Id: I5526f5a66f6600560005731a3ee536eb858f4ff0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4639
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This allows system voltages to be specified uniformly, rather than
hardcoding them for each board. This will be used by cubieboard in an
upcoming patch.
Change-Id: I9dc2d3281d076c359c3fad13688649f7d36c0001
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4637
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I1de0e656a38527b172af1d0b5bcd97acbfc03bf0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4591
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
chip found in X230 if not using hardware sequencing.
Change-Id: I6ded10d35bfdbbe3d54c4170dd7846c7833f5ff7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4616
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I8e51a8fc03c1d7dbbdc11b121b3ea3ec18f65a5a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4670
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Without these delays on fast systems like X230 the port is read before it's
updated.
Change-Id: I3e01fc348cc5170cec108a05095ba301055ed6b0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4617
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Using asm as it's done currently is unsafe because caller-saved registers
are not declared as clobbered.
Using real call is nicer.
regparm((1)) ensures that argument is passed in %eax as expected.
Change-Id: I7449182582eaa53d4e473bc834b472edd8ee0d30
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I773793bf53d91ae787bd0d0ae7bd882243196d56
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4678
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
To be consistent with touchpad counterpart.
Change-Id: I72d09b41b964f80a81fbf409ef69dd368834a3e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I6652e0ad4e0179950f775bbd0200484907bfc976
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
To stay in line with wwan and bluetooth.
Change-Id: Iafe2dc97fc2aec5c2ad1834659b796a6b079c1bc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I2f422e83f2afcf0cc3f3ecbace01a8f4f39e87d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4663
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
They're pretty annoying.
Change-Id: I44d26dc168927a9cedfd6ecc4c9a51a3a7b362c7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Ability to choose compatibility mode is interesting for testing payloads and
OS for compatibility with older systems.
As per comments
"ide_legacy_combined # TODO: Does nothing since
generations, remove from sb code?"
The "combined" mode was removed. It wasn't used by any mobo and the code for
it is almost identical to IDE one other than few bits relating to interrupt
handling and ISA mode.
Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I3c89bb633c32a2c2db349cb4fcbe1ed1c8deb5af
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Useful for accessibility.
Sticky modifier (sticky Fn) is a behaviour of modifier key when
you don't have to hold it pressed to achieve the result. E.g.
with normal Fn brightness up is:
<Press Fn> <Press Home> <Despress Home> <Depress Fn>
With sticky Fn you can do:
<Press Fn> <Depress Fn> <Press Home> <Despress Home>
Change-Id: I4da5adcea02428d936023891de08684cae77c44e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Tested on my X201 and X230.
Change-Id: I3c7ec65681157d15c6e87eea64779a08e03ae5a8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Number one reason to use cbfs_get_file was to get file length.
With previous patch no more need for this.
Change-Id: I330dda914d800c991757c5967b11963276ba9e00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4674
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4659
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
wwan_enable was never used.
wlan_enable isn't something for device tree but for CMOS config if at all.
Change-Id: I765d9d6f0b73b7dc5a57c0c630a53b4b7a0b48cb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4651
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This changes eliminates a warning from the ASL compiler.
Change-Id: I502cca731b6b4cd3e17c57fc191f1eed10a5a1fe
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4093
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The rule has the target `junit.xml` and runs `make clean` and `make` and
logs the result in the file `junit.xml` suitable for consumption by
Jenkins.
Change-Id: I42a31f6c7a45fa9c3773969d78f745fcc4e09dbd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4611
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
It includes a sandybridge fix.
Change-Id: I84ff1ac1622b10a4a4aa42517bac0c024c386998
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4642
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This should probably propagate to the other lint checks.
The idea: only enforce style on files that were at least touched
by the developer.
Change-Id: I5ac690ee726e27e80e790fa9a41cd14b84ad2161
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4644
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
IS_ENABLED() requires the full define (incl. CONFIG_ prefix)
but isn't needed here.
Change-Id: I91d504367c75ce3fcecc6fa2499afaa0896595d3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4646
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove sprintf as if you can't easily use snprintf then you probably
have buffer overflow.
Change-Id: Ic4570e099a52d743aca938a2bfadb95981adc503
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4280
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
THis reduces risks of bufer overflows.
Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4279
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
snprintf is a safe variant of sprintf. To avoid buffer overflows
we shouldn't use sprintf at all. But for now let's start by
implementing snprintf in first place.
Change-Id: Ic17d94b8cd91b72f66b84b0589a06b8abef5e5c9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4278
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
The other port is not easily accessible.
Change-Id: I6ea31346a375debcd5fc1c27e4078e3a436715e3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4635
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
DRAM reset gate GPIO is different on different mobos move it to hidden config
with 60 (current value) as default.
Set it to 10 for Lenovo X201.
Change-Id: I4f3b6876d7c33d4966315091b63a76a9a0064c16
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4622
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The memory initialization code is a work in progress for uboot, so we
only import the bits needed to get RAM up and running. Any refactoring
is cosmetic, and any functional refactoring should be done in separate
patches, and preferably, in coordination with the sunxi team.
Since it's not yet determined if we should initialize memory during
the bootblock or romstage, we don't add raminit to the build just yet.
Change-Id: I2ec1821942c6970150a02fa3806a257da649e1c9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4597
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
PLL5 is special in that it controls the DRAM clock, and requires a
fine-grained low-level control which will be needed by raminit code.
This change also brings functionality which will be needed by
raminit.
Change-Id: I25ecc91aa2154e504ceebb9003a5e5728d47f4a3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4593
Tested-by: build bot (Jenkins)
|