| Age | Commit message (Collapse) | Author |
|---|
|
We need to ensure uma_memory_size and uma_memory_base stay within a
32-bit address range. Both of these variables are 64 bits wide, so it is
simplest to use 64 bit math when doing the bit shifts and then check if
they are in range after.
Change-Id: Idd180f31e8cff797a6499b12bc685daa993aae05
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229665, 1229666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot would clear CMOS by request via IPMI command, for example
BMC can issue "bios-util server --boot_order enable --clear_CMOS"
to set the request and reboot the system, then coreboot would clear CMOS
on the next boot.
Tested on Mono Lake
Change-Id: I21d44557896680cfac3c3b6d83e07b755b242cad
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34857
Reviewed-by: Johnny Lin
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:123907904
TEST=SD WP GPIO PAD retains coreboot configuration
and FSP ScsSdCardWpPinEnabled UPD is set to 0.
Change-Id: I30367cda09cc8c88abb649f70b4587889083f9af
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34901
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Cometlake FSP allows provison to configure SD controller WP pin, As
some of board design might choose not to use the SD WP pin from SD
card controller. This implementation adds a config that allows to
enable/disable SD controller WP pin configuration from FSP.
BUG=b:123907904
Change-Id: Ic1736a2ec4b9370d23a8e3349603eb363e6f59b9
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34900
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C strict aliasing rules state that it is undefined behaviour to access
any pointer using another pointer of a different type (with several small
exceptions). Eg.
uint64_t x = 3;
uint16_t y = *((uint16_t *)&x); // undefined behaviour
From an architectural point of view there is often nothing wrong with
pointer aliasing - the problem is that since it is undefined behaviour,
the compiler will often use this as a cop-out to perform unintended or
unsafe optimizations. The "safe" way to perfom the above assignment is
to cast the pointers to a uint8_t * first (which is allowed to alias
anything), and then work on a byte level:
*((uint8_t *)&y) = *((uint8_t *)&x);
*((uint8_t *)&y + 1) = *((uint8_t *)&x + 1);
Horribly ugly, but there you go. Anyway, in an attempt to follow these
strict aliasing rules, the ReadMEM() function in SB800 does the above
operation when reading a uint16_t. While perfectly fine, however, it
doesn't have to - all calls to ReadMEM() that read a uint16_t are passed
a uint16_t pointer, so there are no strict aliasing violations to worry
about (the WriteMEM() function is exactly similar). The problem is that
using this unnecessary workaround generates almost 50 false positive
warnings in Coverity. Rather than manually ignore them one-by-one, let's
just remove the workaround entirely. As a side note, this change makes
ReadMEM() and WriteMEM() now match their definitions in the SB900 code.
Change-Id: Ia7e3a1eff88b855a05b33c7dafba16ed23784e43
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Port_List is an array of 8 elements, and GCC 9 is warning that there
are no 'others' when all 8 elements are explicitly initialized, which is
causing the build to fail. Remove the 'others => Disabled' clause to
silence this.
Change-Id: Id082e7a76641438f3fb4c4d976dbd254a7053473
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34918
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
add_ivrs_device_entries() is a recursive function, and each recursive
call is passed a pointer to a root_level variable declared outside the
function. In an attempt to make the function self-contained, the initial
call is made with the root_level pointer set to NULL, and then the
function attempts to detect this and allocate a root_level variable for
the rest of the calls. This makes memory management very tricky - for
example, the pi code incorrectly attempts to free the root_level
variable at the end of *each* recursive call, which only avoids being a
double-free because free() in coreboot is currently a no-op. Let's
keep life simple and declare root_level as a local variable outside the
first function call instead.
Change-Id: Ifd63ee368fb89345b9b42ccb86cebcca64f32ac8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1362811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34387
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This brings in 4 new commits from the upstream repository.
65a6d94 Free image buffer on read error
9de64c7 Fix various abort(), crashes, and memory errors
7c9db58 Bump to version 1.8
3b3c3cc Use C99 uintXX_t instead of implementation-specific u_intXX_t types
Change-Id: If949309a7481537de6529c205fe745d5509906a9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Doing this allows to call console_init() earlier in romstage.
This also fixes IO UART in bootblock, although it appears there
is currently no board that was affected.
Change-Id: Iec363a8c651cc1b05b24229db09d686938118f3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34969
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variable length arrays were a feature added in C99 that allows the
length of an array to be determined at runtime. Eg.
int sum(size_t n) {
int arr[n];
...
}
This adds a small amount of runtime overhead, but is also very
dangerous, since it allows use of an unlimited amount of stack memory,
potentially leading to stack overflow. This is only worsened in
coreboot, which often has very little stack space to begin with. Citing
concerns like this, all instances of VLA's were recently removed from the
Linux kernel. In the immortal words of Linus Torvalds [0],
AND USING VLA'S IS ACTIVELY STUPID! It generates much more code, and
much _slower_ code (and more fragile code), than just using a fixed
key size would have done. [...] Anyway, some of these are definitely
easy to just fix, and using VLA's is actively bad not just for
security worries, but simply because VLA's are a really horribly bad
idea in general in the kernel.
This patch follows suit and zaps all VLA's in coreboot. Some of the
existing VLA's are accidental ones, and all but one can be replaced with
small fixed-size buffers. The single tricky exception is in the SPI
controller interface, which will require a rewrite of old drivers
to remove [1].
[0] https://lkml.org/lkml/2018/3/7/621
[1] https://ticket.coreboot.org/issues/217
Change-Id: I7d9d1ddadbf1cee5f695165bbe3f0effb7bd32b9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This variable is overwritten on one branch of the next if statement, and
the other branch returns, so this assignment does nothing.
Change-Id: I63737929d47c882bbcf637182bc8bf73c19daa9f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Print an error message and die if the PCI device cannot be found.
Change-Id: I10c58502658ebf12d1a8fe826ee7d47a618fd1c8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1403000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the
FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of
the first array and overwrite both of them at once. However, FSP_M_CONFIG
is not declared with the packed attribute, so this is not guaranteed to
work and is undefined behaviour to boot. It is cleaner and less tricky
to copy them independently. The same is true for DqsMapCpu2DramCh0 and
DqsMapCpu2DramCh1, so we change those as well.
Change-Id: Ic6bb2bd5773af24329575926dbc70e0211f29051
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 136538{8,9}, 140134{1,4}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33135
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the
FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of
the first array and overwrite both of them at once. However, FSP_M_CONFIG
is not declared with the packed attribute, so this is not guaranteed to
work and is undefined behaviour to boot. It is cleaner and less tricky
to copy them independently. The same is true for DqsMapCpu2DramCh0 and
DqsMapCpu2DramCh1, so we change those as well.
Change-Id: If394f14c4a39d6787ae31868241229646c26be7a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1365730, 14013{38,39,40,42,43}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It probably doesn't make sense to continue if the CK804 isn't found, and
doing so would perform uninitialized reads of the busn and io_base
arrays anyway, so let's return early.
Change-Id: I13c663314496caf51a57da7f27f9ea24e3d7fcbd
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1370586
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For files built in ramstage and smm -classes, testing
for !__PRE_RAM__ is redundant.
All chip_operations are exluded with use of DEVTREE_EARLY
in static devicetree, so garbage collection will take care
of the !__SMM__ cases.
Change-Id: Id7219848d6f5c41c4a9724a72204fa5ef9458e43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some files under src/ec are built for both ramstage
and SMM. This change provides declarations of the
required struct to have __SMM__ guards removed from
those files.
Change-Id: Ic0c01a11f29381153f19378d5bc4559db8126e00
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id878fd33ec3d2de640d9a488058a805be3ccd223
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I123db3a51a8f354359e8ed5040d23111ea4eb8a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
In addition to zero IccMax specified by mainboard with socketed CPU, allow
a zero LoadLine default.
The SoC code will fill in the default AC/DC LoadLine values are per
datasheets:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
The AC/DC LoadLine is CPU and board specific.
TODO: Find out how to get the LoadLine from vendor firmware and find out
how to map those to different CPU LoadLines.
Change-Id: I849845ced094697e8700470b4af95ad0afb98e3e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34938
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Datasheets used:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
This allows mainboards to specify a zero IccMax, which all mainboards with
socketed CPU should do.
Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34937
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a switch case to find the correct VR config.
The following commit will add more entries for which a lookup table
isn't the best solution.
Change-Id: Ib11c3d6e1eb339a0c7358c312a32731d835e7c73
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Get rid of defines and hardcode values directly.
Just a cosmetic cleanup to make it more readable.
Change-Id: I3eec44b38af356c3d87235740c65e2c2f6fc5876
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Ib74c5c8cb9197fa06b2972cb96337fedd7f85b5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I548dfa053f195b1ea87568240bf0041bb193d825
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Level trigger is recommended setting for touchscreen interrupt of
kohaku, so we would change it as the recommedation.
BUG=b:139179200
BRANCH=none
TEST=Verified touchscreen works on kohaku
Change-Id: Ibbcdbe3ab555d014048f66ff527e539c5b566187
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I91d5a0fa0b5e4575d03eb083fade43f6dbb94c77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These are only referenced inside auto-generated static.c
files, and util/sconfig also generates the declarations
automatically from source file pathnames.
Change-Id: Id324790755095c36fbeb73a4d8f9d01cdf6409cb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34979
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11027acb11a4656536384134d0caebd14b63770c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Iae944b589d587b30826e935feae029aa8d07d5d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
region_is_subregion() checks whether the size of the inner region is
larger than the size of the outer region... which isn't really necessary
because we're already checking the starts and ends of both regions.
Maybe this was added to ensure the inner region doesn't overflow? But
it's not guaranteed to catch that in all cases. Replace it with a proper
overflow check.
Change-Id: I9e442053584a479a323c1fa1c0591934ff83eb10
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I99dbef5d52e4fc6cde22876216052cbe998822cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also tidy up some register usage.
Change-Id: I5b4b4a29c854f4ca165cede4e9b6755a6c577e76
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34975
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9d86f8475221b52ccdb45cdeaf538e85ab7a17c0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Signed-off-by: Matt Parnell <mparnell@gmail.com>
Change-Id: I3674bc7035a28c4174a1bc1ee014c88e0ac96e8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I4c6238b0e5f41fcc667baf6b486c7fff4c90a7cb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34944
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2ebeb393e4a5a4bfac8a37a877d067aca484ca2e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When entry to romstage is via cpu/intel/car/romstage.c
BIST has not been passed down the path for sometime.
Change-Id: I345975c53014902269cee21fc393331d33a84dce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I110e54175a81b6a651213e0f18ddc1e3e71160cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The original name DCACHE_BSP_STACK_SIZE will be exclusively
used to define the fixed size of BSP stack when it is located
near the beginning of CAR region. This implementation has the
stack located at the very end of CAR region.
Remove other fam10-15 exclusive configs from global space.
Change-Id: I8b92891be2ed62944a9eddde39ed20a12f4875c0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test passes on Kukui.
Change-Id: I27164f0909edb9d9398835e292fb845f0e342391
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34532
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is needed for the AST2500 to work, because it uses 4E/4F.
Change-Id: Ie47474e9bf1edfe98555a148469c41283e9a4ea6
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change-Id: I92e2adb32d19ff49bdef353e1f191c4960ce0d18
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This change ports some previous work for Skylake:
cb58683ef5 soc/intel/skylake: Add support for mode-aware DPTF
...to common DPTF code so that we can support mode-aware DPTF for other
Intel platforms.
BUG=b:138702459
BRANCH=none
TEST=Manually test on hatch:
(1)Add DPTF_TSR0_TABLET_PASSIVE and DPTF_TSR1_TABLET_PASSIVE
to hatch baseboard dptf.asl
(2)Flash custom EC FW code which updates DPTF profile number when
entering/exiting tablet mode
(3)On DUT, see /sys/class/thermal/thermal_zone2/trip_point_{1,2}_temp
updated when device mode is switched (tablet/clamshell)
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: I5e7b97d23b8567c96a7d60f7a434e98dd9c69544
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34785
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is based on the hatch variant
BUG=b:138879565
TEST=FW_NAME="akemi" emerge-hatch coreboot depthcharge intel-cmlfsp
chromeos-bootimage look for image-akemi.*.bin generated under the
/build/hatch/firmware/
Change-Id: I1a868839e2c598f8052d37c99713bc58b21e887c
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I62104894b5a956523f509d88d49e45a0bd1c587d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34749
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I02ad07e049cb74ccb52ba3d41eb16c58a2cfb38b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34748
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: I4d67a7c3107758c81a67e1668875767beccfcdb0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: I491e609bed00dc79c628b321c74ad7f4cc31b5fe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Make the prototypes match what drivers/amd/agesa would
rather see, in preparation to use the same code with
open-source AGESA.
Change-Id: I1506ee2f7ecf3cb6ec4cce37a030c05f78ec6d59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Configure GPIOs for eMMC SKUs
BUG=b:132918661
TEST=Verify SSD is disabled when SKU ID = 2/4/21/22
Change-Id: I9f678a40555dbc841487811cc1f680b211a51a89
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Disable SATA controller and SATA port 1 for eMMC SKUs
BUG=b:132918661
TEST=Verify SSD is disabled when SKU ID = 2/4/21/22
Change-Id: I6d95ff94b079a564f74c19739370101899843f00
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34789
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs for SSD SKUs
BUG=b:132918661
TEST=Verify eMMC is disabled when SKU ID = 1/3/23/24
Change-Id: Ief48a2fd2fa078aa5d89aec01f99af75510334b2
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34851
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Disable eMMC controller for new SKU ID 23 and 24
2. Disable HS400 mode
BUG=b:132918661
TEST=Verify eMMC is disabled when SKU ID = 1/3/23/24
Change-Id: I0d893f0f7339e7b1a1e6b56d1598c0a361c8d604
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Change-Id: I6fc083aa30d05c11c1b6db7b3facacf5ae857c92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rename southbridge_smm_X to smm_southbridge_X.
Rename most southcluster_smm_X to smm_southbridge_X.
Change-Id: I4f6f9207ba32cf51d75b9ca9230e38310a33a311
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34856
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I258fccc5e1db0bedb641c8af8cb9727954d4d7c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some timeouts given were too small when serial console is enabled due to
its spinlock making code runtime worse with every AP present.
In addition we usually don't know how long specific code runs and how
long ago it was sent to the APs.
Remove the timeout argument from mp_run_on_all_cpus and instead wait up
to 1 second, to prevent possible crashing of secondary APs still
processing the old job.
Tested on Supermicro X11SSH-TF.
Change-Id: I456be647b159f7a2ea7d94986a24424e56dcc8c4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The default is 1 (byte) spacing.
Tested on Mono Lake with 4 (32-bit) spacing
Change-Id: I47412c32e6db8f58b4fde8150adcbce349ca18a7
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There was no code present to call wrmsr with the data we
prepared in the structs. The MSRS are already set up by FSP,
just reference with the more recent names of PRMRR and UNCORE_PRMRR.
Change-Id: Ib49e7af52e1170a1304975ff0ae63f99e106dffe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I2fff107e38abdd34f2d80d4d258be4c429d371e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As most platforms will share the subset of enabling
both low RAM WB and high ROM WP MTRRs, provide them
with a single function.
Add possibility for the platform to skip these if
required.
Change-Id: Id1f8b7682035e654231f6133a42909a36e3e15a1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34809
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are benefits in placing the postcar_frame structure
in .bss and returning control to romstage_main().
Change-Id: I0418a2abc74f749203c587b2763c5f8a5960e4f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7176efdd1000789a093a1b4e243b4b150e6bb06f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34864
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I58131d77ba23024cd23e38584f8062d330d2564f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
|
|
Change-Id: Ie79702efab519b16cff45ccad61b95e7d8c2fbac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34854
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The non-alternative one will have inlined version available
with the new header.
Change-Id: I208ac84fdf5d8041a1901cc2331769cd3a8d6bea
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
At the moment we only have two splitting of TSEG,
one with and one without IED. They can all use
same implementation.
Make configuration problems of TSEG region assertion
failures.
Rename file from stage_cache.c to tseg_region.c to
reflect it's purpose.
Change-Id: I9daf0dec8fbaaa1f4e6004ea034869f43412d7d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34776
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The src/lib/edid now supports reporting manufacturer name so we should
define that in MIPI panels and print out in initialization.
BUG=None
TEST=emerge-kukui coreboot; boots properly
Change-Id: If844da84ecca31307127b14c66bbe17c408699f3
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When debugging usually we want to print out a full identifier for panel,
that should be manufacturer and part number. Previously the edid only
contains ascii_string (which is usually the part number) but we should
export manufacturer name as well.
Change-Id: I0020fdd5b9f9331b25825876e0de4dc7e26b0464
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The fixed size of init command in lcm_init_table is wasting lots of
space and we should change to packed array since the command buffer
already provides length information.
With this change, BOE panel init commands have been reduced from 4848
bytes to 1309 bytes.
BUG=b:80501386,b:117254947
TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly
Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some Kukui variants may have eDP panels connected via a PS8640 MIPI bridge
which we may retrieve EDID dynamically.
BUG=b:b:137517228
TEST=emerge-jacuzzi coreboot chromeos-bootimage; boots and see display.
Change-Id: I85aac5255e6a3e6019299670486214ecffbf9801
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34516
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare the following panel for Kodama:
- BOE TV101WUM-N53
BUG=b:138156559
TEST=builds Kodama image and working properly
Change-Id: I129cb6bf084b76da3ad33b7a19e38e884442b1aa
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34505
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support Kukui rev 2 panel (via SSD2858).
BUG=b:129299873
BRANCH=none
TEST=Build as Kukui and boots on Rev 2 unit.
Change-Id: Icc16c4297eb3c6b6a4770a36661a2e3cab418048
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Declare the following panels for Krane:
- BOE TV101WUM-NL6
- AUO KD101N80-45NA
The edid info and init command are from:
https://crrev.com/c/1565758
BUG=b:129299873
BRANCH=none
TEST=Builds krane image and boots properly.
Change-Id: Id19c6c2b4c1c728c39aa26301adf7d6fb5046403
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Many devices in Kukui family will be using MIPI panels, which needs
hard-coded EDID and initialization commands. And because each device may
have its own layout and ID, there should be very few devices sharing
same panel configuration. As a result, we want to put panel data (EDID
and init commands) into board-specific modules, provided by
`get_panel_description` function.
The panel numeric ID is identified by ADC 2, and is currently available
as higher 4 bits of sku_id(). After ID is retrieved, the
get_panel_description should return a reference to the EDID and table of
init commands. The default implementation is to simply return NULL, and
the data for real devices should be provided by panel_*.c in further commits.
BUG=b:80501386,b:117254947
BRANCH=none
TEST=boot correctly on Kukui
Change-Id: I19213aee1ac0f69f42e73be9e5ab72394f412a01
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The MT8183 display serial interface (DSI) is based on MIPI
Alliance Specification, supporting high-speed serial data
transfer between host processor and peripheral devices such
as display modules.
DSI supports both video mode and command mode data transfer
defined in MIPI spec, and it also provides bidirectional
transmission with low-power mode to receive messages from
the peripheral.
Reference: MT8183 Application Processor Functional Spec,
6.7 Display Serial Interface (DSI)
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
For systems with real MIPI panels (8173/oak was using PS8640 eDP
bridge), we have to send DCS commands to initialize panel.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ie7c824873465ac82a95bcb0ed67b8b9866987008
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34773
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The video timing should be based on PHY timing. Some values can be
ignored on 8173 because of fixed values in PHY but should be calculated
for newer platforms like 8183.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Id3ad2edc08787414a74188f5050460e98222caf4
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The PHY timing should be calculated by data rate (Mbps). However for
8173 some values were hard-coded so we want to introduce a new
mtk_phy_timing structure and a weak function mtk_dsi_override_phy_timing
that allows per-SOC customization to apply PHY timings.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I1176ca06dda026029ff431aca7f9e21479eed670
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add code to read SPD data, parse it and save into SMBIOS table. This is
implemented for socketed DDR4 chips only. For soldered-down memory this
is not implemented and probably won't be ever needed.
TEST=tested on OCP Monolake mainboard, and found dmidecode -t memory to
work. The stack has also been tested on an out-of-tree board.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I1162eb4484dab46f1ab9fe3426eecc4d9378e8e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add ability to decode basic fields of DDR4 SPDs and produce SMBIOS table
17. XMP, schemas, extended field parising is totally not yet implemented.
Also, put CRC function used in DDR2, DDR3 and DDR4 ina common file.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: If3befbc55cf37e1018baa432cb2f03743b929211
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add read/write functions to hook it up with existing SPD retrieval code.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I9f5993dc795badf72751a4e6c9d974119a653e30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34679
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IMC is found on certain Xeon processors. On such platforms SPDs are not
connected to SMBus on PCH but to dedicated IMC-owned pins. The purpose
of this driver is to expose access to the i2c/smbus controller associated
with IMC.
Datasheet used: Intel Xeon Processor D-1500 Product Family, Volume 2,
reference 332051-001
This driver is largely based on i2c-imc.c Linux driver.
https://lwn.net/Articles/685475/
TEST=single/double reads and single writes on Xeon-D1500.
Hardware: Open Compute Project Monolake platform.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: Idbcda1c2273b9a5721fcd9470b4de182192779e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34678
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to use internal UART it needs to 'enabled'. This is normally done
by FSP. However sometimes internal UART is needed before FSP is invoked.
TEST=check if printk() show up in early romstage. Tested on OCP Monolake.
Tested on out-of-tree mainboard to see if UART on LPC still works.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I88a7b1a38abf9a09137f6dd75a5a9dee104daaca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34683
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for allowing devices to provide a
"compatible" property string that can be used when _HID is set to
PRP00001. This is used to allow Linux kernel drivers to match the
device to appropriate driver based on the OF-style compatible
string.
Reference:
https://www.kernel.org/doc/Documentation/acpi/enumeration.txt
BUG=b:129162037
TEST=Verified that atmel touchscreen gets enumerated correctly on
kohaku using PRP0001 and compatible string.
Change-Id: I8a306854c67ab2f056ea8774df46599ef0c55761
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This change updates the Atmel touchscreen ACPI node to use PRP0001 as
_HID to allow OF-style compatible string matching for enumeration.
Reason for this change: Atmel touchscreen driver in Linux kernel looks
for "compatible" property to decide if it is okay to attach to the
device. This check seems to be a protection against old firmware in
the field that do not have the right properties.
BUG=b:129162037
TEST=Verified that touchscreen works on Kohaku.
Change-Id: I6d027f8533494e903efd1da8da1fa273a97fe9b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
The default is DMIC0 on, but Kohaku is also using DMIC1
BUG=b:133282247
BRANCH=None
TEST=arecord -D hw:0,1 -r 48000 -c 4 -f s32 4dmic.wav
make sure 4 channels recording work
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: I2dd573e1634516bcf9876bedb92b7d9148bb0e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34692
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We mostly discourage typedefs for structs. Hide
smm_save_state_area_t in the single file that still
uses it.
Change-Id: I163322deab58126cc66d416987eaf7dca9ce8220
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic1e3cae5298997b552020b78e6ff56d60cf22036
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34821
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9a4e57f8fd032f2824eab0e5b59d635710e3e24b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Any platform should need just one of these.
Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia9b74cfb8b68240e87d7adfa28d37db408edb519
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I4cac29c1bf59df56df8cf0035ee1d5379bbde76e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The only platform-specific difference in mtk_dsi_phy_clk_setting is how
to configure MIPI TX because those registers (and logic) are quite
different across different SOCs.
The calculation of data rate is actually the same so we should isolate
it and move to common, and rename mtk_dsi_phy_clk_setting to a better
name as mtk_dsi_configure_mipi_tx.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: I894dc2c4c053267debf5a58313b2bb489bcf5f3a
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The 'bpp' was referred to both 'bits per pixel' and 'bytes per pixel' in
MTK DSI driver and should be corrected. By this change we now always
consider 'bpp' as 'bits per pixel', and rename the variables for other
cases.
BUG=b:80501386,b:117254947
TEST=make -j # board = oak and boots
Change-Id: Ibd405220b73859e5592c68f498af07eef8d7edbc
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34770
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DSI initialization is almost the same for 8173 and 8183, so we want
to move most of common functions into common/dsi.c.
The major board-specific functions left are:
- reset (controller register has different format)
- pin_drv_ctrl (8183 does not need this)
BUG=b:80501386,b:117254947
TEST=make -j # board=oak (mt8173)
Change-Id: I8d4369a3c84db551287a9c9d1b22f552c5f7518d
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4aaa67ba3de82b07e0e278be39a93a482bbf09c4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34819
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
