summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-30soc/ti/am335x: Map useable RAMSam Lewis
Maps the useable RAM so that it can be used for booting a payload. TEST: Booted a simple ELF payload (that just flashes LEDs) on the Beaglebone Black. Change-Id: I7f657c97e4753071c90ba8ca800a96108807e6b9 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44388 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30mb/ti/beaglebone: Initialize DDR3Sam Lewis
Adds initialisation of 512MB of DDR memory on the BBB to the romstage. The parameters for the DDR peripherals are taken from U-Boot. TEST: Booted from romstage into ramstage. Also successfully managed to run the "ram_check" in lib.h. Change-Id: I692bfd913c8217a78d073d19c5344c9bb40722a8 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-30soc/ti/am335x: Add SDRAM initialization driverSam Lewis
Adds code taken and (barely) adapted from U-Boot (release 2020.04, commit 36fec02b1f90b92cf51ec531564f9284eae27ab4) for SDRAM initialization. This should in theory work for other configurations than the Beaglebone Black's DRAM configuration, but hasn't been tested. Change-Id: Ib1bc2fa606f7010c8c789aa7a5c37cd41bc484b9 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44386 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30mb/ti/beaglebone: Load romstage/ramstage from SDSam Lewis
Adds a "sd_media" boot_device to allow booting from the SD card. This assumes that the generated "MLO" file is placed at a 128KB offset from the start of the SD card, to allow for the MBR etc. to be at the start of the SD card. Placing the MLO file here allows the AM335x boot ROM to load and execute the bootblock stage as well, as 128KB is one of the offsets the boot ROM checks when looking for the next stage to execute. As part of this, a FMD for the Beaglebone has also been defined. It's sized at 32M somewhat arbitrarily, as SD cards could allow for much bigger payloads. TEST: Beaglebone boots from bootblock into romstage. Romstage to ramstage still doesn't work as it needs RAM initialization first. Change-Id: I5f6901217fb974808e84aeb679af2f47eeae30fd Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30soc/ti/am335x: Add MMC/SD driverSam Lewis
Adds a driver for the am335x MMC peripheral. This has only been tested with SD cards and probably needs some modification to use eMMC or MMC cards. It's also currently a little slow as it only supports reading a block at a time. Change-Id: I5c2b250782cddca17aa46cc8222b9aebef505fb2 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-29soc/amd: smbus: Use correct type for uintptr_tPaul Menzel
Fix the format warning below by using `PRIxPTR`, which is defined as unsigned long. src/soc/amd/common/block/smbus/smbus.c:33:56: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'uintptr_t' (aka 'unsigned long') [-Werror,-Wformat] printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio); ~~~~ ^~~~ %#lx src/include/console/console.h:60:61: note: expanded from macro 'printk' #define printk(LEVEL, fmt, args...) do_printk(LEVEL, fmt, ##args) ~~~ ^~~~ 1 error generated. Change-Id: I727c490d3097dcf36cdbcd4db2852cd49d11785f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-29mb/amd: majolica,mandolin: Remove needless article from warningPaul Menzel
At the end of the built, the line below is printed. coreboot has been built without an the Microchip EC FW. Remove *an*, as one article is enough. Change-Id: I28b24f0f2dade17e30e16cc6d935976e331a7a97 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-29soc/amd/cezanne: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd/picasso: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Since soc/romstage.h only contains the mainboard_updm_update function prototype, rename it to soc/fsp.h. This patch also removes a few unused includes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd/cezanne,picasso: rename fsp_params.c to fsp_s_params.cFelix Held
This file populates the UPD-S data structure that gets passed to the FSP-S, so add that s part to make it a bit clearer which FSP parameters it'll set up. This is also a preparation to add a fsp_m_params.c file in the following patches. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53786df0909055e66eac675b5580909b7960944f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29mb/google/guybrush: select DISABLE_KEYBOARD_RESET_PINFelix Held
Now that we have the DISABLE_KEYBOARD_RESET_PIN Kconfig option, select it and remove the temporary workaround that was implemented in the mainboard code in commit 39ef89033624a2d14b0c77cdbdf287dd7d7059e1. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I634d11290dad8c93f10979f06243b1bf84737ae2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd: add DISABLE_KEYBOARD_RESET_PIN optionFelix Held
The KBRST_L pin will cause a reset when driven or pulled low even when the GPIO mux is set to GPIO and not native function. So when you want to use that pin as general purpose output the keyboard reset input functionality needs to be disabled by selecting this option in the board's Kconfig file to avoid causing a reset by writing a 0 to the output level bit when it's configured as an output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Furquan Shaikh <furquan@google.com> Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29mb/google/guybrush: Enable DISABLE_SPI_FLASH_ROM_SHARINGRaul E Rangel
Guybrush uses GPIO67 as an input. BUG=none TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I10068bb6870b2cb96033cf3893cde71db5c1d709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51781 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd/cezanne: Implement PROVIDES_ROM_SHARINGRaul E Rangel
BUG=none TEST=Build guybrush and verified with the PPR that the register and bits are still the same Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/common/block/acpimmio/mmio_util: add fch_disable_kb_rstFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie65e39ffb8c353415f5b68e1e0f378d18eeb7498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd: move PM_RST_CTRL1 register definition to common acpimmio headerFelix Held
TEST=Verified that this register and the defined bits exist in Cezanne, Picasso, Stoneyridge, Bolton and SB800. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/*/gpio: include types.h instead of stdint.h to have size_tFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a747d4c28e6d449c054ce83966767e13b51a939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28nb/intel/pineview/raminit.c: Correct clkset1 programmingAngel Pons
Reference code does a 32-bit write, and the values don't fit in 16 bits. Change-Id: I1195c0637b5c215a45328ebae312cf620cd4c950 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51860 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/pineview: Correct HICLKGTCTL writeAngel Pons
Reference code uses the `0x06` as an or-mask, which makes more sense. Change-Id: I04e5262d9ab36ae866fccd90255e4a0f85328e85 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51859 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/pineview: Drop MCHBAR macro from DMIBAR accessAngel Pons
While the macro value is the same, the DMIBAR register is not HTBONUS1. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I5025f115f5a55dc782092989f3d158802d1d9353 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51858 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/ironlake/quickpath.c: Correct one valueAngel Pons
Commit 56823f53dc6de5a804f7c88b9f24847133ddc876 (nb/intel/ironlake: Rewrite early QPI init) rewrote this part, but the or-value is missing one zero. Correct this magic value to align with MRC binaries. Change-Id: Id7a6766b3f0fe415dea70cbc54afc30f808c8b16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51857 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/ironlake: Drop copy-pasted finalisation stepsAngel Pons
This was copied from Sandy Bridge and does not apply to Ironlake. These offsets go past the MCHBAR window (MCHBAR size is 16 KiB on Ironlake). Some of these writes would have collided with `DEFAULT_HECIBAR` if the PCI resource had been reported as fixed. Remove the copy-pasted code. Change-Id: I7688921ad7517cbd68a0c48262b29ecf7b4c396c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51856 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28nb/intel/haswell: Replace `DMIBAR64` and `EPBAR64`Angel Pons
While 64-bit writes seem to work properly, there could be unknown side-effects in some cases, e.g. when running in long mode. Since reference code uses two 32-bit writes, follow suit. Change-Id: I48ed3d94c7865b3a3cce52108e99cf1656b57fc2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51855 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/boten: Fix DPTF passive and critical policiesStanley Wu
Thermal sensor2 defined in baseboard do not exist in boten. With the format the DPTF policies are defined in boten, all the entries from the baseboard are included and then the overrides applied. This causes the non-existent DPTF devices to be exported in the ACPI table and in turn OS reading invalid temperatures. Fix the format for DPTF passive and critical policies. BUG=None BRANCH=dedede TEST=Build and boot to OS in boten. Ensure that the DPTF entries look correct in both static.c and SSDT tables i.e. passive and critical policies for applicable devices only are present. Change-Id: I63c781e0a439f1e7a3525fa7cf290fa9300cb066 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-03-28mb/google/zork: update stamp_boost parameter for gumbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:182753072 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I43c104ef912aafecadf9497f9ea20c8478c0e920 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-28soc/intel/alderlake: add processor power limits control supportSumeet R Pawnikar
Add processor power limits control support to configure values for alderlake soc based platforms. BRANCH=None BUG=None TEST=Build and test on alderlake rvp board Change-Id: I9dc37c7a43e6bd6f1ff5e8a97e22a0c7ac421802 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28Update amd_blobs submodule to upstream masterMartin Roth
Updating from commit id 3a9d7cd: 2021-03-03 15:37:08 -0700 - (picasso: Update Dali SMU firmware) to commit id dded82f: 2021-03-23 15:36:36 -0600 - (picasso: Update Dali SMU firmware) This brings in 2 new commits. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If71e52a2a3e50aeb8599798de7b49bc71ed26a04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-03-28mb/purism/librem_14: Move/fix touchpad interrupt GPIOMatt DeVillier
On production boards, the touchpad interrupt line was moved from GPP_B20 to GPP_B3. Fix the GPIO pad config and devicetree entry, and update documentation to remove touchpad config issue. Change-Id: Iaefeba8f78c567b67e7a416c27299bff574c23ab Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51797 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28documentation: Add documentation for Purism Librem 14Matt DeVillier
Change-Id: Ic68a3d17534f78dae8c432253982e8d10a6427f0 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28soc/intel/common/gpio: Add function to get GPIO index in groupTim Wawrzynczak
The gpio_get_index_in_group function returns the index of the GPIO within its own group Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7f6b312bd1d0388ef799cd127c88b17bad6a3886 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28soc/intel/common/systemagent: Add macros to access REGBAR spaceTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I97203aca377d4dd77e03b2c83fdd20a2874cc1c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51755 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/tigerlake: Fix REG_BASE_SIZETim Wawrzynczak
REG_BASE_SIZE is supposed to represent the size of the REGBAR MMIO space in KiB. It is currently sized at 4MiB, but this is incorrect, EDS Vol. 2 indicates REGBAR is 16MiB in size, therefore update the constant to reflect this. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0cfbe5b8bb07faa854efd4bf70640daa117f2bb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28soc/intel/common/tcss: Rename TCSS_DISPLAYTim Wawrzynczak
This name isn't very meaningful, rename the config option to ENABLE_TCSS_DISPLAY_DETECTION to make its meaning more obvious. Change-Id: Ib21a3b5a37d25f93bd515f8c6e5ad39c9d2ea1c4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51771 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/intel/tigerlake: Move TCSS code to intel/common/blockTim Wawrzynczak
The Type-C subsystem ("TCSS") IP block is similar between TGL and ADL. For pre-boot purposes, the limited amount of functionality required appears to be common between the two, therefore move the functionality to intel/common/block and rename from `early_tcss to `tcss` along the way. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1c6bb9c7098691f0c828f9d5ab4bd522515ae966 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51753 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28ACPI: Add SATC structure for DMAR tableJohn Zhao
The SoC integrated address translation cache(SATC) reporting structure is added to Virtualization Technology for Directed I/O specification Rev3.2. This change adds an ACPI Name-Space Device Declaration structure SATC which has type 5 reporting structure. BUG=None TEST=Built image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I91d1384083c98b75bcbdddd9cc7b7a26fab25d9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51776 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/blipper: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:181732574 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Idc5b190fc2c30689feaf08229b2a75c69894ac5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51763 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/storo: Enable ALC1015 AMP (Auto Mode) driverlizhi7
Enable gpio mode driver for ALC1015 AMP Auto Mode. BUG=b:177868812 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: Ic7deb9be6444d85d32ff94ce8e4a140dbdea349e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-28mb/google/dedede/var/storo: Configure I2C times for I2C devicesTao Xia
Configure I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). Measured I2C frequency just as below after tuning: touchpad:371.63 kHz touchpanel:368.24 kHz audio codec RT5682:369.13 kHz speaker AMP L:366.21 kHz speaker AMP R:365.8 kHz P-sensor:368.34 kHz MIPI Camera:363.35 kHz BUG=b:181589325 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I1a755a54540e106b41ac427f84989ed7e8037558 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51624 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/amd/common/gpio: add PAD_NF_SCI pad typeFelix Held
This patch adds a pin configuration macro that supports both switching a pin to its native function and configuring it as a SCI source. This is a preparation to remove the GPIO2 soc_gpio_hook. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If0da5c010f35fd902f6b8857368daec93c12394a Reviewed-on: https://review.coreboot.org/c/coreboot/+/50373 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/zork: update telemetry settings for gumbozKevin Chiu
update telemetry to improve the performance. BUG=b:182753072 BRANCH=zork TEST=1. emerge-zork coreboot 2. run AMD SDLE stardust test => pass Change-Id: I6e4d0c6fcd740d82edf073fb307aa6a6b09ec78a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51790 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/caroline: Re-enable I2C2 / fix digitizerMatt DeVillier
Caroline has a Wacom W9013 digitizer on I2C2, which was incorrectly disabled in commit d957d12e6 [mb/google/glados: clean up variant devicetrees] as part of preparation for converting to overridetree format. Test: build/boot, verify digitizer now available under Linux Change-Id: I234bc0126b5d13c22a663d6544382890b312ce63 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL-M RVP LP5 memory configurationMaulik V Vaghela
List of changes: 1. Add correct board Id for ADL-M LP5 configuration 2. Add spd hex files for LP5 Micron part 3. Update memory.c file with correct Dq-dqs and byte mapping for LP5 BUG=None BRANCH=None TEST=Build is successful for ADL-M RVP Change-Id: I0bbd3f5b56bf7fbe918cc599d32a01dcae896ddd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/adlrvp_m: Enable ADL_M RVP LP4 memory configurationMaulik V Vaghela
List of changes: 1. Add board Ids for ADL-M LP4 configuration 2. Add spd hex files for LP4 configuration 3. Update memory.c file with correct Dq-dqs and byte mapping for LP4 BUG=None BRANCH=None TEST=Build and boot is successful for ADL M LP4 RVP Change-Id: Id817faee3fff2a8a911ebda35774dfb6ddc5524b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Configure GPIOs for ADLRVP-MVarshit Pandya
List of changes: 1. Add separate file for ADL-M GPIOs 2. Configure GPIOs as per the schematics of ADL-M RVP TEST=Able to build ADL-M Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I03a532f69f42db723b976a0f7b0acf6f4b98e354 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2021-03-28mb/intel/shadowwmountain: Enable CSE Lite SKU for shadowmountainSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST=Verified build for Shadowmountain Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2ebf4da1b8c1df2e9c43b6e3bb688a9f8db652d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51496 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/intel/adlrvp: Enable CSE Lite SKUSridhar Siricilla
During the initial phases, the development and validation teams have to deal with both Consumer SKU and Lite SKU firmware. Having the support for CSE Lite enabled by default in coreboot helps in integrating both the SKUs. With this we only have to interchange the CSE region in the full BIOS image without having to worry about Kconfigs. Eases the build and integration flow. TEST= Built and booted on ADL-P LP4 RVP Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia92c7b71c69a23104ace9fc53fd39f01120fa751 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51567 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/amd/picasso/mca: add missing comma in mca_bank_name array of stringsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Found-by: Coverity CID 1451389 Change-Id: I0af379360fc95e4c6b72d677738c6e7497ed9206 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-28tests/include/tests/test.h: Add TEST_REGION_UNALLOCATEDJakub Czapiga
Some tested modules require regions to be defined but do not necessarily access them. TEST_REGION_UNALLOCATED() combined with DECLARE_REGION() are sufficient for most cases that require symbols only. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I51c5f6ce56575021c6e4277a9ed17263cd2e3bb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51769 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28mb/google/dedede/var/sasuke: Add support zinitix touchpadSeunghwan Kim
This change adds support zinitix touchpad for sasuke. BRANCH=dedede BUG=None TEST=built and checked touchpad worked on sasuke Change-Id: I85794311c49e33c4683482e125bea5ca2dbacfa8 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28grunt/barla: add Realtek ALC5682 codec supportKevin Chiu
ALC5682 i2c address: 0x1A BUG=b:171755306 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I8bc571104bebe02acf86507774580effc808beb6 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-28security/intel/cbnt: Generate KM from Kconfig symbolsArthur Heymans
Add an option to generate the Key Manifest from Kconfig options. Change-Id: I3a448f37c81148625c7879dcb64da4d517567067 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50410 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28security/intel/cbnt: Add option to generate KMArthur Heymans
This add an option to generate KM using the 9elements bg-prov tool using a json config file. The option to just include a provided KM binary is kept. A template for the json config file can be obtained via "bg-prov template". Another option is to extract it from a working configuration: "bg-prov read-config". Change-Id: I18bbdd13047be634b8ee280a6b902096a65836e4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50409 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28security/intel/cbnt: Prepare for KM/BPM generationArthur Heymans
Private and/or public keys will be provided as user input via Kconfig. As a private key also contains the public key, only ask what is required. Change-Id: I86d129bb1d13d833a26281defad2a1cb5bf86595 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-03-28mb/google/kukui: fine tune the data lane trailJitao Shi
ANX7625 requires customized hs_da_trail time. So override the data trail for ANX7625. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Jacuzzi Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I620035363507daaa19e3c272a44059c17be29af1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
2021-03-28soc/amd/common/block/i2c: Use `size_t` for `num_pins`Angel Pons
There's no need to use a fixed-width type here. Change-Id: I727c64661990040db356c5508fecc0a65960c095 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51794 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-28soc/amd/common/block/i2c: Fix printf format specifiersAngel Pons
The correct printf format specifier for an `unsigned int` is `%u`. Change-Id: Iaf780eb366f8c3493b89beb9a5643fa285e7825d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51793 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27Makefile.inc: Use `additional-dirs` for $(objcbfs), $(objgenerated)Nico Huber
We use `additional-dirs` for a single `mkdir -p` invocation for all directiories. I don't see why these two, $(objcbfs) and $(objgenerated), should be an exception. Fixes clean builds for targets that don't include the phony `coreboot` target, e.g. `make qemu`. Change-Id: I85abaa74cddefd2bd669e2b5c8934352775070fe Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-27mb/intel/dcp847ske: Drop useless MCHBAR writesAngel Pons
There's no need to write the GDCRTRAININGRESULT registers after raminit. Change-Id: If604920fe7a3bee96f72f8aff5e96f0e25548f18 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50534 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27soc/mediatek: Adjust hsa, hbp, hfp packets for MIPI_DSI_MODE_LINE_ENDJitao Shi
ANX7625 requires the line packets to end at the same time. Otherwise, the display will be shifted. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Jacuzzi Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I5949de1a9a1947fa188233787166a478b1de68b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-27drivers/analogix: Increase the clock tolerance from 0.1% to 2%Jitao Shi
Increase the input tolerance to avoid panel scroll. BUG=b:173603645 BRANCH=kukui TEST=None Change-Id: I4af96f58876932175b28fc0a8543720ebd7b5deb Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39025 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-27mb/intel/adlrvp: Allow GPIO PM override to disable dynamic GPIO PMSubrata Banik
This patch allows overriding GPIO PM miscconfig register for each GPIO community to avoid dynamic clock gating. TEST=Dump GPIO Community MISCCFG register to ensure all Bit [7:0] are set to '0'. Change-Id: I9aca9cb0641e2731c028ea5ed76c563da3400b74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-27soc/intel: Rename and move MISCCFG_GPIO_PM_CONFIG_BITS definition to soc/gpio.hSubrata Banik
Lists of changes: 1. Rename MISCCFG_ENABLE_GPIO_PM_CONFIG -> MISCCFG_GPIO_PM_CONFIG_BITS 2. Move MISCCFG_GPIO_PM_CONFIG_BITS definition from intelblock/gpio.h to soc/gpio.h. Refer to detailed description below to understand the motivation behind this change. An advanced GPIO PM capabilities has been introduced since CNP PCH, refer to 'include/intelblock/gpio.h' for detailed GPIO PM bit definitions. Now with TGP PCH, additional bits are defined in the MISCCFG register for GPIO PM control. This results in different SoCs supporting different number of bits. The bits defined in earlier platforms (CNL, CML, ICL) are present on TGL, JSL and ADL too. Hence, refactor the common GPIO code to keep the bit definitions in intelblock/gpio.h, but the definition of MISCCFG_GPIO_PM_CONFIG_BITS is moved to soc/gpio.h so that each SoC can provide this as per hardware support. TEST=On ADL, TGL and JSL platform. Without this CL : GPIO COMM 0 MISCCFG:0xC0 (Bit 6 and 7 enable) With this CL : GPIO COMM 0 MISCCFG: 0x00 (Bit 6 and 7 disable) Change-Id: Ie027cbd7b99b39752941384339a34f8995c10c94 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-27soc/intel/common/block/gpio: Fix typecasting issueSubrata Banik
This patch fixes unsigned conversion from 'int' to 'uint8_t' {aka 'const unsigned char'} changes value from '-256' to '0' [-Werror=overflow]. Change-Id: Ifcc42e5a2ff06f0af0eb96bef4c6044cbcdbd94b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-27soc/intel/alderlake: Correct GPE DWx assignment as per EDSSubrata Banik
List of changes: 1. Update GPIO Group to GPE DWx assignment encoding as per MISCCFG register per GPIO Community. 2. PMC_GPP_* macros are also updated as per GPIO_CFG register in PMC space. BUG=b:183464235 TEST=Able to fix the TPM IRQ issue on SM. Change-Id: Id9f57b0b5726315f5ebba013f11d52ed3ee34484 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51789 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-26soc/intel/xeon_sp: Move PCH PCI device definesMarc Jones
Move the PCH PCI device defines out of the SOC specific PCI defines and into a common include. The PCH is common and doesn't need duplicate definitions. Change-Id: I1ca931e0f01e03c67f8f65ed7fd33c2c1d22183d Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-26mb/google/zork/vilboz: Enable ALC1015 AMP driverFrank Wu
Enable ALC1015 driver for audio support in vilboz BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage, then verify with ALC1015 AMP Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If0abfd6570579fe637a7bef31de2f01d58f3bdf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-26mb/intel/shadowmountain: Disable the unused CPU PCIe RPV Sowmya
This patch disables the unsued CPU PCIe RP for shadowmountain. TEST= Boot shadowmountain and verify the device is disabled. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Ide2badb06178fca8ff5cf51d8573a14635e190cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51772 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-26mb/intel/adlrvp: Remove static VBT stitchingMaulik V Vaghela
Currently, we used to stitch extra VBT files to ADLRVP build using Makefile. With enablement of emerge build, we should be able to integrate more than 1 VBT binaries using ebuild. This removing these lines to avoid compilation issues in emerge builds BUG=None BRANCH=None TEST=Check if compilation passes on emerge build. Stitched additional VBT files using emerge and checked that coreboot picks up correct VBT. Change-Id: I69f1cc6c07415515ff85180fdd7cc5de11b4d805 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-03-26Documentation/coding_style: Issues not mentioned and cleanup patchesJulius Werner
This patch adds a bit of a "preamble" to the coding style to provide guideance on how it should be applied and how style questions that aren't mentioned should be handled. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I88efd5f1006bd1fd82cea14ea65422d9958dc197 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-26mb/google/brya: Update ddr configSubrata Banik
Fixed ddr config to override the FSP default value. BUG=b:182772421 TEST=Built image and passed memory training. Without this change: RcompTarget on Lpddr4x = { 40, 40, 30, 30, 30 } With this change: RcompTarget on Lpddr4x = { 40, 30, 30, 30, 30 } Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ib07ff36496828b5de78ed928b294a400ad08865f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-26soc/intel/alderlake: Add provision to override Rcomp settingsSubrata Banik
Add function to allow overriding the RcompResistor and RcompTarget UPDs from mainboard if required. Mainboard users can pass required rcomp from memory.c file. Refactor ddr_config structure to take out rcomp related variable outside for all memory type to override if required. BUG=b:182772421 TEST=Able to override the default RcompResistor and RcompTarget values. Change-Id: Ie8528bbf0517728534d47f9adaabfc9a2c469609 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-26soc/intel/alderlake: Align RcompResistor definition as per MRCSubrata Banik
List of changes: 1. Alder Lake MRC is expecting a RcompResistor value of word width. Reference RCOMP resistors on motherboard are ~ 100 Ohms but coreboot is passing an array of RcompResistor which is not completely in use. Note: Rcomp resistor value represents rcomp resistor attached to the DDR_COMP pins on the SoC. 2. Also, remove usage of '&' with memcpy the required value into RcompTarget array. 3. Also, update RcompResistor value for ADLRVP. BUG=b:183341229 TEST=Enable FSP debug log to verify the override value for RcompResistor is reflecting correctly. Change-Id: I69c7cec55b65036fc039c33374a3fd363ef7004e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-25mb/amd/majolica: Enable IO port 2E/2FZheng Bao
MEC1701 can be accessed by IO port 2E/2F Change-Id: I31f1b147476ec487e64f3c30b3cf514b45ced416 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-25mb/google/zork/variants/baseboard: USB2 HS phy settingsJulian Schroeder
Set default USB2 HS disconnect threshold to maximum to avoid false disconnects that eventually lock up the xHCI controller BUG=b:174538960 TEST=suspend_stress_test -c 50 on vilboz and morphius. Sample set of USB2 HS devices connect and disconnect successfully Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: Ic921d850a0bdd717a2a7e50e9e6f65e39e0607bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51265 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25soc/amd/common/block/i2c: fix control flow bugFelix Held
commit 4f87ae1d4a3a597f1260534001bd99160cc8ca99 introduced a regression in the I2C initialization resulting in soc_i2c_misc_init never getting called, since the continue statement was indented like it belonged to the if above, but due to the missing curly braces it was outside the if block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Found-by: Coverity CID 1451395, 1451387 Change-Id: Id1f17ad59cba44e96881f5511df303ae90841ab3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51786 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/hatch/var/genesis: Fix PCIe root portsJoe Tessler
The previous "PCIe port" numbering was incorrect and resulted in several PCIe devices failing to enumerate. With lane reversal, these numbers are all backwards. This explains the confusing mapping of Clock Source #1 to Root Port #9 in https://review.coreboot.org/c/coreboot/+/50101. We were confusing "Root Port" vs "PCIe Lane". This change addresses the port vs. lane confusion in the device tree configurations. It also adds more detailed documentation to a future reader (i.e., me) to avoid this blunder. BUG=b:181633452,b:181635072,b:177752570 TEST=build AP firmware; flash device BRANCH=none Change-Id: I47edf0b0af1bdcf86b89f17ad2a1f128ef9e9f7a Signed-off-by: Joe Tessler <jrt@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-25mb/google/hatch/var/genesis: Add missing GPIOsJoe Tessler
After revisiting the genesis GPIO table and schematics for EVT closure, I discovered several missing and/or incorrectly documented GPIO pin mappings. Now the GPIO pin names and functions should match what's written in the latest schematics. BUG=b:181633452,b:181635072,b:177752570 TEST=build AP firmware; flash device BRANCH=none Change-Id: I73e6733bce761b00717091834c7a49e85154f80b Signed-off-by: Joe Tessler <jrt@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51677 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25nb/intel/haswell: Move USB config API into Lynx PointAngel Pons
Both EHCI and xHCI USB controllers are inside the PCH (southbridge). Now that mainboard USB configuration no longer depends on pei_data.h definitions, the API declarations can be placed in southbridge code. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ia21991b225482b33c5bc0dc52884674d301b28ba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-25mb/google/volteer: Collis: Update SPD tableFrankChu
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/collis/memory/ src/mainboard/google/volteer/variants/collis/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I773c65c0b6d5e868572530305ab8a61a0dd1532d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-03-25mb/google/dedede/var/cret: Enable touchscreenDtrain Hsu
Add ELAN and Weida touchscreen into devicetree for cret. BUG=b:180547621 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Icdb7aabe4a9ecd7b5a057c4644799aa537adb6ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/51737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-25mb/google/dedede/var/cret: Configure I2C ports and touchpadDtrain Hsu
1. Support Elan touchpad. 2. Support JYT touchpad. 3. Follow schematic to disable I2C1 and I2C3. BUG=b:183454249, b:180547781 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I8c150c3f65d0e057d5ba1b07ec1c20886f02ef6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51726 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/dedede/var/cret: Generate SPD ID for supported partsDtrain Hsu
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. H9HCNNNBKMMLXR-NEE 2. MT53E512M32D2NP-046 WT:F 3. K4U6E3S4AA-MGCR BUG=b:183057749 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iacfdd9a27f126ba4b97d1a6493bcc09bb31454a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51619 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25mb/google/dedede/var/cret: Configure USB port settingsDtrain Hsu
Follow schematic to modify USB port settings. USB2 [0]: USB Type C Port 0 USB2 [1]: None USB2 [2]: USB Type A Port 0 USB2 [3]: LTE USB2 [4]: None USB2 [5]: Camera UFC USB2 [6]: Camera WFC USB2 [7]: Integrated Bluetooth USB3 [0]: USB Type C Port 0 (M/B side) USB3 [1]: None USB3 [2]: USB Type A Port 0 (M/B side) USB3 [3]: LTE BUG=b:182973703 BRANCH=dedede TEST=Build the coreboot image. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I80447d6ac3422f858a9022f550b4f42353819405 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-25mb/google/dedede/var/cret: Configure GPIODtrain Hsu
Follow schematic to modify some GPIO pins. GPP_C12 - NC Pin, UP_20K GPP_C18 - NC Pin GPP_C19 - NC Pin GPP_C22 - NC Pin, UP_20K GPP_D12 - NC Pin GPP_D14 - NC Pin GPP_D15 - NC Pin GPP_D19 - NC Pin GPP_D20 - NC Pin GPP_E0 - NC Pin GPP_E2 - NC Pin GPP_H1 - NC Pin GPP_H6 - NC Pin GPP_H7 - NC Pin GPP_G0 - NC Pin GPP_G1 - NC Pin GPP_G2 - NC Pin GPP_G3 - NC Pin GPP_G4 - NC Pin GPP_G5 - NC Pin, UP_20K GPP_G6 - NC Pin GPP_G7 - NC Pin BUG=b:183078393 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id966884f3e36303b636fa13ef9baecccae87604a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-25soc/amd/common/block/gpio_defs: Wake from either S0i3 or S3Karthikeyan Ramasubramanian
Add a helper bit mask to enable wake from either S0i3 or S3. BUG=None TEST=Build the Guyrbush mainboard. Change-Id: I934abad78135260081a61aee4c496b362e483de1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-24mb/purism/librem_mini: Drop superfluous devices from devicetreeMatt DeVillier
The 'device pci 00.0 on end' entries are not necessary for socketed devices unless a chip driver needs to be bound to a device, so remove them from the devicetree. Also remove the `drivers/wifi/generic` chip driver as it was not necessary either. Change-Id: Id5f2e34d98b236f9cfac9f0afd8a8017e349603f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-24mb/google/guybrush: Temporary fix to set eSPI muxMathew King
This change allows guybrush EC communication while other patches in the SOC code are worked on. BUG=b:183149183 TEST=Boot guybrush with EC comunication Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I56fb64d4c065cf0665025346218cc66d77dacb52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51665 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/google/guybrush: disable KBRSTENKangheui Won
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a logic to clear it. BUG=b:183340503 TEST=build Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-24mb/google/volteer/variants/drobit: Modify touchpad power sequenceWayne3 Wang
Modify power sequence of touchpad to meet the definition in the spec. BUG=b:178353432 BRANCH=firmware-volteer-13672.B TEST=build test firmware and verified by EE team. Change-Id: I8b8e383223d017223c36044efdf21738fe26d2ea Signed-off-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51514 Reviewed-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24sb/intel/common: Use new acpigen_write_PRT_*_entry functionsTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9f573b9bd40260ab963c5a4a965a6ac483af91ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/51158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-24acpi: Add acpigen_write_PRT* helpers for generating _PRT entriesTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia666bd0e5db40d7873532dc22bc89be9854b903a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-24cpu/x86/smm: Fix SMM start address passingMarc Jones
This fixes an issue introduced in commit ad0116c0327f575f0af184a2f4861848a49a0e2a cpu/x86/smm_loaderv2: Remove unused variables It removed one variable that was needed to set the SMM start address that is used to set the SMM stack location. Change-Id: Iddf9f204db54f0d97a90bb423b65db2f7625217f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51721 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24device/azalia_device.c: Program beep verbsPatrick Rudolph
Change-Id: I11b362d5e586194501de5dbd11f9c934a9d53940 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-24device/azalia_device.c: Introduce AZALIA_MAX_CODECSAngel Pons
Add the AZALIA_MAX_CODECS Kconfig option and use it. Change-Id: Ibb10c2f2992257bc261e6cb35f11cc4b2d956054 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-03-24device/azalia_device.c: Correct STATESTS access widthAngel Pons
The HD Audio spec states that the STATESTS register is 16 bits wide. Change-Id: If7859ed33e58d907a91c4ac8675892e37998cf41 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-24device/azalia_device.c: Unify `wait_for_valid` timeoutsAngel Pons
The timeout is never reached when the codec is functioning properly. Using a small timeout value can result in spurious errors with some codecs, e.g. a codec that is slow to respond but operates correctly. When a codec is non-operative, the timeout is only reached once per verb table, thus the impact on booting time is relatively small. So, use a reasonably long enough timeout to cover all possible cases. Remove the unconditional 25 µs delay and increase the timeout delay. The new value of 1 ms is the maximum of all existing implementations. Currently, the only boards using this code are AMD reference boards: - AMD Bilby - AMD Mandolin - AMD Padmelon Change-Id: Ia5e4829d404dcecdb9e7a377e896a319cb38531a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-24mb/emulation/qemu-q35: Fix format specifier for a `size_t`Benjamin Doron
Fix compilation on GCC 10.2.1 Change-Id: I47d29ef065f57f171f429bb6a368bc86e31acee9 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-24mb/system76/gaze15: Add System76 Gazelle 15Tim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not working: - Discrete/Hybrid graphics This requires a new driver to work correctly, which will be added and enabled later. Change-Id: I10667fa26ac7c4b8eb67da11f3e963062bd0db47 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47822 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24mb/intel/adlrvp: Enable CnviBtAudioOffloadUsha P
This change enables CnviBtAudioOffload. FSP is invoked to configure BT over USB and BT I2S pins for cAVS connection. BUG=None TEST=Verified BT offload working on ADL RVP Signed-off-by: Usha P <usha.p@intel.corp-partner.google.com> Change-Id: I1185a6c2295bae7d469be4da86502506adbeb8cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/51032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 06:26:45 +0000