summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-30mainboard/artecgroup/dbe61/mainboard.c: Use tab for indentsElyes HAOUAS
Change-Id: I111ded7cc3cac21e4be6329209fdd067f313010a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17662 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-30sb/intel/lynxpoint: add missing I2C ACPI SSCN/FMCN methodsPrabal Saha
The SSCN and FMCN methods provide the optimal HCNT/LCNT timing values to the driver, and are necessary when using I2C devices (eg, trackpad and touchscreen) in ACPI (vs PCI) mode. Add these methods using the timing values from Broadwell, which work for Haswell/Lynxpoint as well. TEST: build google/peppy with trackpad/touchscreen devices in ACPI mode, observe proper operation under Windows [8.1/10] and Linux [Mint 18] Change-Id: I25f07ac474b041358315530e5f391bb33d9c4d04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Prabal Saha <coolstarorganization@gmail.com>
2016-11-30soc/intel/skylake: Pass proper CPU flex ratio override to FSPNaresh G Solanki
In bootblock, cpu flex ratio is set to non-turbo max. In FSP UPD, if CpuRatioOverride is zero, then it tries to program cpu ratio to zero. Since it is different than the non-zero value programmed in bootblock, FSP gives reset. To avoid the reset, set FSP UPD for CPU flex ratio override to that value as set in bootblock. Change-Id: I8cae5530ec97cedfbd71771f291db6f55a9fd5c2 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30vendorcode/skykabylake: Update header to fsp v1.4.0Naresh G Solanki
Add header files as is from FSP build output without any adaptations. Change-Id: Ic4b33c42efe8c9dbe9f9e2b11bf6344c9487d86e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17556 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mb/intel/kblrvp: Add Variant board support for KBLRVPBarnali Sarkar
Add support of Variant board model for existing intel/kblrvp, since there might be more RVP board supports under intel/kblrvp. Existing is for KBL RVP3 board. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP3 Change-Id: I041a07a273dbb77e422d48591f06b5f1011cd9f7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17630 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-30mb/intel/kblrvp: Use common lib spd_bin to get spdNaresh G Solanki
Use common lib spd_bin to get spd. Change-Id: If94413fc36a98f7694f560955bbb80abefe32166 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17435 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30lib: Add library to handle SPD data in CBFS or DIMMNaresh G Solanki
Add library to: 1. add spd.bin in cbfs, generated from mainboard/spd/*.spd.hex files. 2. runtime get spd data with spd index as input. 3. fetch spd over smbus using early smbus functions. Change-Id: I44fe1cdb883dd1037484d4bb5c87d2d4f9862bf8 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17434 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-30mainboard/intel/kblrvp: Revert back USB OC pin programmingBarnali Sarkar
With commit 2c3054c1(soc/intel/skylake: Add USB Port Over Current (OC) Pin programming) USB OC pin programming is already initiated from devicetree.cb, hence remove it from ramstage.c. BUG=none BRANCH=none TEST=Built and booted KBLRVP from USB device Change-Id: Icb47533aa57f208d5a52560db924169b908c7a88 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17635 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Fix top_of_ram calculationNaresh G Solanki
FSP 2.0 implementation conditionally sets PMRR base based on EnableC6Dram UPD. Therefore, handle the case of the PMRR base not being set since FSP 2.0 changed behavior from FSP 1.1 implementation. If prmrr base is non-zero value, then top_of_ram is prmrr base. If Probeless trace is enabled, then deduct trace memory size from calculated top_of_ram. Change-Id: I2633bf78705e36b241668a313d215d0455fba607 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Use SendVrMbxCmd1 for FSP 2.0Rizwan Qureshi
In FSP 2.0 the UPD to send extra VR Mailbox commands is switched from SendVrMbxCmd to SendVrMbxCmd1. Use the same in silicon initialization. Change-Id: I46bd50c9acc0456e2483f20ccb5e9ec2a0de232a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17578 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/skylake: Move IO decode range out from pch_lpc_initTeo Boon Tiong
1. Move existing IO decode range from pch_lpc_init to early stage before SIO init. 2. At the same time, enable SIO decode range (0x2e/0x2f) for platform which use super IO. Change-Id: I72df16d0a784686d8cadfbee09b5aef60576ac43 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17337 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Remove pad configuration size hardcodingSubrata Banik
Existing GPIO driver inside coreboot use some hardcoded magic number to calculate gpio pad offset. Avoid this kind of hardcoding. Change-Id: I6110435574b141c57f366ccb1fbe9bf49d4dd70a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17571 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/skylake: Disable Legacy PME for Root portsNaresh G Solanki
Legacy PME are enabled by default in FSP UPD region. When Legacy PME is enabled, then an SCI is generated and should be handled by OS and BIOS/Coreboot in collboration. OS requires some ACPI methods (eg _L69) which help to determine the wake source and also to clear some registers. But this infrastructure is not present as of now in coreboot and also linux handles PMEs natively. Hence the SCI was never handled by OS and the status bits were never cleared i.e., PCI_EXP_STS. For this reason the level triggered SCI will remain active and the system will wake up as soon as it enters S3. To fix this, diabled Legacy PME (PmSci for Root ports). Change-Id: I61317eb45305bdb14be3cc1a54fd9961d6ed593e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17553 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mainboard/google/snappy: Tune i2c frequency to 400 KhzWisley Chen
tune i2c devices clk for snappy: I2C0: audio I2C2: TPM H1 I2C3: elan touchscreen I2C4: elan touchpad I2C5: wacom digitizer BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage, and measured on EVT. audio: Freq. 393.7kHz Rise Time 58.8ns Fall time 12.11ns TPM H1: Freq. 398.8kHz Rise Time 31.71ns Fall time 13.28ns elan touchscreen: Freq. 390.5kHz Rise Time 235.7ns Fall time 37.64ns elan touchpad: Freq. 393.7kHz Rise Time 288.8ns Fall time 51.67ns wacom digitizer: Freq. 388.8kHz Rise Time 124.1ns Fall time 21.10ns Change-Id: Ib2be9e1575d4962476423eafa80f9bb10ba40e17 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17634 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-30soc/intel/apollolake: Add save/restore variable MRC cacheAndrey Petrov
Apollolake MRC cache is divided into two regions: constant and variable. Currently they are clubbed together. Since variable data changes across cold reboot it triggers invalidation of the whole cache region. This change declubs the data, adds routines to load/store variable data on flash. BUG=chrome-os-partner:57515 TEST=with patch series applied: cold reboot, make sure MRC is not updated. Do S3 suspend/resume cycle. Change-Id: I374519777abe9b9a1e6cceae5318decd405bb527 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17237 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/common: Add save/restore for variable MRC dataAndrey Petrov
Piggy-back on existing MRC cache infrastructure to store variable MRC data. Only one set of data can be valid at given point of time. Currently this magically happens because region alignment is forced to 0x1000 and region itself is of the same size. This needs to be somehow programmatically enforced. Change-Id: I8a660d356ca760b8ff9907396fb9b34cb16cf1db Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17320 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mainboard/reef: Add RW_VAR_MRC_CACHEAndrey Petrov
Chop off 4kb block from RW_MRC_CACHE to store variable MRC cache. BUG=chrome-os-partner:57515 TEST=with patch series applied: cold reboot, make sure MRC is not updated. Do S3 suspend/resume cycle. Change-Id: I3e19fff9c9b20d6c73cbb13bfeec49e9a274bb72 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17235 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30driver/intel/fsp2_0: Add version parameter to FSP platform callbackAndrey Petrov
Change-Id: Ibad1ad6bb9eedf2805981623e835db071d54c528 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17497 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30vendorcode/intel: Update apollolake UPD headers to SIC 1.2.3 releaseBrandon Breitenstein
This header update contains updates for skipping punit as well as some MRC related UPD values. BUG=chrome-os-partner:60068 BRANCH=none TEST=built with FSP 1.2.3 and MRC patches for coreboot CQ-DEPEND=CL:*307357 Change-Id: I8c66c0c0febba5e67ae3290034e9b095c9e68f07 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/17631 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30intel/fsp_rangeley: Fix regression on MMCONF_SUPPORTKyösti Mälkki
Following commit did not move this selection to northbridge: bac0fad Remove explicit select MMCONF_SUPPORT Change-Id: I5f3c429dfd160eb439f396db2baf0ecf280022fd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17653 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-30util/lint: Add check for symbolic links in the coreboot treeMartin Roth
Because of the varied environments that coreboot is built under, we don't want to have symbolic links in the tree. Change-Id: I4cf9d95a437626cb52e3032a5e6cba83320a334b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17633 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-11-30mb/google/oak: replace symbolic linksMartin Roth
These three files were added as symbolic links to the other files in the same directory. Delete the links, and copy the real files into their places. Because of the varied environments that coreboot is built in, we don't want to have symbolic links in the tree. These three files were the only cases of symbolic links. Change-Id: If69f40c2c4cdcabc4fdfc1d6026a91c0791756da Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17632 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-30mb/gigabyte/ga-945gcm-s2c: Add mainboard using variantsArthur Heymans
This mainboard is identical to ga-945gcm-s2l except for NIC which is a Realtek RTL 8101E chip (10/100 Mbit). The schematics of ga-945gcm-s2l mention multiple NICs and ga-945gcm-s2c and ga-945gcm-s2l have a common manual further indicating that those boards are close to identical. Change-Id: Iba3d401efcf208154e639c3237b201830a5151aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17416 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-30util/lint: Exclude devicetree files with custom name from license checkNaresh G Solanki
As devicetree files can have different name followed by extension cb Exclude all .cb file from the license header check. Change-Id: I37b651eedd77cbf3d3e65ff0f027f971b0a2d2ac Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-29mb/kontron/ktqm77: Enable native gfx init through libgfxinitNico Huber
Change-Id: Ie16b3236e7378a2062b3081e4530d7a4791b4b66 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17074 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-29nb/intel/nehalem,sandybridge: Hook up libgfxinitNico Huber
Change-Id: I4288193c022cc0963b926b4b43834c222e41bb0d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16953 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-29drivers/intel/gma: Hook up libgfxinitNico Huber
Add `libgfxinit` as another option for native graphics initialization. For that, the function gma_gfxinit() (see drivers/intel/gma/i915.h) has to be called by the respective northbridge/soc code. A mainboard port needs to select `CONFIG_MAINBOARD_HAS_LIBGFXINIT` and implement the Ada package `GMA.Mainboard` with a single function `ports` that returns a list of ports to be probed for displays. v2: Update 3rdparty/libgfxinit to its latest master commit to make things buildable within coreboot. v3: Another update to 3rdparty/libgfxinit. Including support to select the I2C port for VGA. Change-Id: I4c7be3745f32853797d3f3689396dde07d4ca950 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-29Hook up libhwbase in ramstageNico Huber
It's hidden behind a configuration option `CONFIG_RAMSTAGE_LIBHWBASE`. This also adds some glue code to use the coreboot console for debug output and our monotonic timer framework as timer backend. v2: Also update 3rdparty/libhwbase to the latest master commit. Change-Id: I8e8d50271b46aac1141f95ab55ad323ac0889a8d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16951 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-29rockchip/rk3399: display: Retry edp initialization if it failsLin Huang
We found that sometimes the edp doesn't get the edid or that video config fails on kevin after a reboot. Now we will retry 3 times to initialize it if there are errors. BRANCH=gru BUG=chrome-os-partner:60150 TEST=reboot kevin, the edp initialization error is no longer seen. Change-Id: I96e20e526294fbc856fbdffcbd63accdc7371ef6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 28c57a6e5b89c7b3a96204ec19a080067460544a Original-Change-Id: I1382cdf4119fc4eeae5c2b36485030e3a38c2d91 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/412622 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-29google/gru: Tune USB 2.0 PHY to increase compatibilityWilliam wu
When testing USB 2.0 compatibility with different kinds of USB 2.0 devices on Kevin board, we find that some USB HDDs (e.g. seagate SRD00F1 1TB HDD) and some smart phones (e.g. galaxy A5 smart phone) can't be detected. And according to the error log, this issue is related to USB 2.0 PHY signal problem. For the USB HDD, error log is: [ 592.557724] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 592.847735] usb 5-1: new high-speed USB device number 3 using xhci-hcd [ 593.473720] usb 5-1: new high-speed USB device number 6 using xhci-hcd [ 594.187717] usb 5-1: new high-speed USB device number 9 using xhci-hcd [ 595.020717] usb 5-1: new high-speed USB device number 13 using xhci-hcd [ 595.284730] usb 5-1: new high-speed USB device number 14 using xhci-hcd [ 595.574816] usb 5-1: new high-speed USB device number 15 using xhci-hcd The log shows that HDD failed to high-speed handshake. For the smart phone, error log is: [ 1145.661625] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 1145.771674] usb 5-1: device descriptor read/64, error -71 [ 1145.979752] usb 5-1: device descriptor read/64, error -71 [ 1146.187721] usb 5-1: new high-speed USB device number 3 using xhci-hcd [ 1146.301754] usb 5-1: device descriptor read/64, error -71 [ 1146.509750] usb 5-1: device descriptor read/64, error -71 [ 1146.717722] usb 5-1: new high-speed USB device number 4 using xhci-hcd [ 1146.724393] usb 5-1: Device not responding to setup address. [ 1146.930795] usb 5-1: Device not responding to setup address. [ 1147.137720] usb 5-1: device not accepting address 4, error -71 [ 1147.246644] usb 5-1: new high-speed USB device number 5 using xhci-hcd [ 1147.253336] usb 5-1: Device not responding to setup address. [ 1147.459786] usb 5-1: Device not responding to setup address. [ 1147.665712] usb 5-1: device not accepting address 5, error -71 [ 1147.671789] usb usb5-port1: unable to enumerate USB device The log shows that smart phone failed to read device descriptor, error -71 may be caused by PHY signal problem. This patch aims to tune USB 2.0 PHY with the following parameters to support USB HDD, smart phone and some other potential USB 2.0 devices. 1. Disable the pre-emphasize in chirp state to avoid high-speed handshake failure. 2. Bypass ODT auto compensation to enable set max driver strength manually. (Bit[42] of usbphy_ctrl register is 1'b1 for bypass, and Bit[41:37] of usbphy_ctrl register is 5'b10000 for max driver strength). 3. Bypass ODT auto refresh, and set the max bias current tuning reference. (Bit[57] of usbphy_ctrl register is 1'b1 for bypass, and Bit[52:50] of usbphy_ctrl register is 3b'100 for max bias current tuning reference). We have done the USB 2.0 compliance test and compatibility test with this patch, it works well. BRANCH=gru BUG=chrome-os-partner:59623 TEST=plug/unplug USB HDD or smart phone in Type-C port, check if they can be detected successfully. Change-Id: I275c2236b8e469bfd04e9184d007eb095657225e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7735c514d4136978133c2299f2f58da8320bb89f Original-Change-Id: I4e6c10faa1c03af9880a89afe4731a7065eb1e4e Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/409856 Original-Commit-Ready: Eddie Cai <eddie.cai.rk@gmail.com> Original-Tested-by: Cindy Han <cindy.han@samsung.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17566 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-29.gitignore: Do not track `intelmetool` binaryPaul Menzel
Change-Id: I74423a1e6476fe9306b1be8115977790d57a1955 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/17638 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-29nb/intel/i945/gma: Declare count variable outside 'for' loopPaul Menzel
Building an image for the Lenovo X60 on Debian 8.5 (jessie) with GCC 4.9.2, compilation fails with the error below. ``` $ gcc --version gcc (Debian 4.9.2-10) 4.9.2 […] $ make # lenovo/x60 with native graphics initialization […] CC ramstage/northbridge/intel/i945/gma.o src/northbridge/intel/i945/gma.c: In function 'probe_edid': src/northbridge/intel/i945/gma.c:570:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < 8; i++) { ^ src/northbridge/intel/i945/gma.c:570:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Makefile:316: recipe for target 'build/ramstage/northbridge/intel/i945/gma.o' failed make: *** [build/ramstage/northbridge/intel/i945/gma.o] Error 1 ``` Fix this by declaring the count variable outside the 'for' loop. Change-Id: Icf69337ee46c86bafc4e1320fd99f8f8f5155bfe Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17623 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-29nb/intel/sandybridge/raminit: Support CL > 11Patrick Rudolph
The code won't allow anything beyond CL11 due to short CAS Latency mask and a bug in mr0 which had the wrong bit set for CL > 11. Increase the CAS bitmask, fix the mr0 reg to allow CAS Latencies from CL 5 to CL 18. Use defines instead of hardcoding min and max CAS latencies. Tested on X220 with two 1866 MHz, CL13 memories Tested-By: Nicola Corna <nicola@corna.info> Change-Id: I576ee20a923fd63d360a6a8e86c675dd069d53d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17502 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-29google/pyro: disable unused devicesKevin Chiu
The following devices i2c5, i2c6, i2c7, spi1, spi2, uart3 are not used. BUG=none BRANCH=master TEST=emerge-pyro coreboot Change-Id: I3b7b96e72b82af1885926800ee99beff07755bbc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17589 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-29mainboard/google/snappy: Add digitizer device to devicetreeWisley Chen
BUG=chrome-os-partner:59034 BRANCH=none TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ib99ae5357274ad0824d0989888dfddcb32ace7e2 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-29intel/sch: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Forgot to actually "flip the bit" in commit ebc21d1 intel/sch: Switch to MMCONF_SUPPORT_DEFAULT Change-Id: Ic095594acb08bae17a6443bc302eb8bfb1ce2083 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17640 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-29mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95CSumeet Pawnikar
This pach sets the DPTF passive temperature trip point for CPU back to 95 degree celsius from 61 degree celsius as per previous thermal optimizations (https://review.coreboot.org/#/c/16766/). BUG=chrome-os-partner:60038 BRANCH=master TEST=built, booted on Reef and verified the passive trip point funtionality. Change-Id: I83ce69b19a94e4ea8ebedfc06f259579ed6dd5d3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17598 Tested-by: build bot (Jenkins) Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-29google/oak: Add DRAM configuration for Samsung K4E8E324EBPH Hsu
Add the configuration for Samsung K4E8E324EB and assign it to RAM_CODE 5. BUG=chrome-os-partner:58983 TEST=verified on Hana EVT. Change-Id: Iea55eb393b21e37f36d454706531f588101ee651 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38d34ed0a0b420e1ab300a47b99035153be5b5d0 Original-Change-Id: I28724c1cf5cf12f47911a571c20280ddab4500d5 Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/410926 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28sio/nuvoton: Include generic nuvoton driver in bootblock stageTeo Boon Tiong
The purpose of this change is to enable serial output in bootblock stage Change-Id: I8e075f1e70d1a6598dfdc34931218f5af9637178 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17359 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28common Ite EC driver: Enable PWM smoothing via devicetreeArthur Heymans
The devicetree parameter already existed without being used in the code. Change-Id: I99dd8bc7a9b2f3509a115a130062d462a62e33fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17614 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28nb/gm45/gma.c: Compute BLC_PWM_CTL value from PWM frequencyArthur Heymans
This allows to set the backlight PWM frequency and the duty cycle in the devicetree instead of using a plain BLC_PWM_CTL value. Change-Id: I4d9a555ac7ea5605712c1fcda994a6fcabf9acf3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17597 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28mb/gigabyte/ga-945gcm-s2l: Configure SuperIO ECArthur Heymans
Change-Id: Id7c2b656f500c14f39d4492667ea461b9ca353b0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-28crossgcc/buildgcc: Show additional information while buildingMartin Roth
- Show number of threads being used to build. - Show the version number of each package when skipping it. - Show whether the tool is a host or target build. Change-Id: I1134c08b417a731859e6b25fe38aecf01a85927b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17418 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28Build system: Update HAVE_CMOS_DEFAULTMartin Roth
- Don't build the cmos.default file into cbfs if USE_OPTION_TABLE isn't specified. - Don't allow HAVE_CMOS_DEFAULT if HAVE_OPTION_TABLE isn't set. Change-Id: I92401e892f09fc95d4b3fd7418cdbd10ed033fa8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28nb/intel/x4x/raminit: Fix DIMM_IN_CHANNEL calculationNico Huber
Fix-up for 696abfc nb/intel/x4x: Fix and deflate `dimm_config` in raminit It didn't fix the channel-number shifting issue as intended. The channel index is either 0 or 1. DIMMs are counted from 0 to 3 where 0..1 covers channel 0, and 2..3 covers channel 1. Since we have two DIMMs per channel, we have to multiply the channel index by 2 (or shift it left by 1) to get the index of the first DIMM in the channel. Finally, to get the offset of a DIMM in the channel we take its index modulo 2 (again, the number of DIMMs per channel). Change-Id: I2784b0cb655bfe823bf5fa48b722623dfca1ddc3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17612 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-28nb/intel/gm45: Fix panel-power-sequence clock divisorNico Huber
We kept this value at it's default on the native graphics init path. Maybe the Video BIOS path, too, I don't know if the VBIOS sets it. The panel power sequencer uses the core display clock (CDCLK). It's based on the HPLLVCO and a frequency selection we made during raminit. The value written is the (actual divisor/2)-1 for a 100us timer. v2: Fix unaligned mmio access inherited from Linux. v3: Use MCHBAR8() instead. Also, the unaligned access might have worked after all. Change-Id: I877d229865981fb0f96c864bc79e404f6743fd05 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17619 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-11-28soc/intel/skylake: Initialize UART based on CONFIG_UART_DEBUGTeo Boon Tiong
Current implementation checks for CONFIG_BOOTBLOCK_CONSOLE and then initializes UART. If only CONFIG_BOOTBLOCK_CONSOLE is enabled without enabling CONFIG_UART_DEBUG, there are compilation issues. This is the case when using SIO UART for Skylake DT platform. Hence initialize UART when CONFIG_UART_DEBUG is enabled and not based on CONFIG_BOOTBLOCK_CONSOLE. Also move BOOTBLOCK_CONSOLE out from UART_DEBUG to CPU_SPECIFIC_OPTIONS as part of the fix needed. Change-Id: Id422a55a68d64a06fc874bddca46b0ef5be6d596 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17349 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28mb/intel/d945gclf: Add cmos.defaultArthur Heymans
With this the system falls back to sane default settings when nvram is invalid. Change-Id: Ie13fd01c4f8403cbedbd7497ad9012c30f494a69 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17042 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-11-28mainboard/google/reef: Set PL1 MAX power limit value to 12WTim Chen
Set PL1 maximum power limit value back to 12W (https://review.coreboot.org/#/c/16596/) from 6W due to Intel's and thermal team's suggestion. BUG=chrome-os-partner:60038 BRANCH=master TEST=build, boot on electro dut and verify by thermal team member Change-Id: I57ae29180962724fde72d522caa542f0f21d5922 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17574 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO ECDamien Zammit
Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17602 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28sio/it8718f: Hook up common environment-controller driverArthur Heymans
Change-Id: I25019c6323b6e9de2e0ce19325266bf3e8f2e309 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17581 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-28sb/intel/i3100/lpc.c: Use tab for indentsElyes HAOUAS
Change-Id: I37d0b1ad84a95342015659d319ac4ce20e5717be Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17584 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28kconfig_lint: More updates for excluded filesMartin Roth
- All of the symbols are in the .config, so if .config is include in the search all of the symbols are always found. - There are now some Kconfig symbols in the Documentation directory, so that needs to be excluded. - 3rdparty has lots of Kconfig symbols that are unrelated to what is being searched for. Change-Id: I0ff56d0a0916338a8b94f5210b8e0b3be5194f41 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-11-28kconfig_lint: exclude payloads from search, add back specific filesMartin Roth
Don't search for symbols in the payloads directory, except for specific files that are actively added back to the search. Change-Id: I6f28dc7dee040b8061fa5644066f3613367b6d84 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17443 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-11-28nb/intel/sandybridge/raminit: Reset internal state on fallback attemptsPatrick Rudolph
Some methods like discover_402x assume an clear state. Should fix fallback attempt raminit failures. Change-Id: I7a6fe044c17f5e0dbfa0e9b9d2aed0c3b6ae3972 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17471 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28sb/broadcom/bcm5785/reset.c: Use tab for indentsElyes HAOUAS
Change-Id: If4350da1c9a7af5228be01a063486433860781e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17583 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28sb/ricoh/rl5c476/rl5c476.c: Use tab for indentsElyes HAOUAS
Change-Id: I3967d1ff0623037efa66927843e0c47f408832d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17582 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28util/crossgcc: fix using -DPatrick Georgi
Otherwise errors similar to "touch: cannot touch '${TARGETDIR}/.GMP.6.1.0.success': No such file or directory" might occur. Change-Id: I4f24c93a25b7d567d3ce14a0415d20fd0778c9c8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/17603 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-26nb/intel/x4x: Fix and deflate `dimm_config` in raminitNico Huber
By shifting the `chan` right instead of left, values were always taken from the DIMMs of the first channel. The diff-stat also looks like an improvement. Change-Id: I605eb4f9b04520c51eea9995a2d4a1f050f02ecc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17587 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-11-25google/parrot: Fix keyboard interrupts, DSDTPrabal Saha
Commit 967cd9a [ChromeOS: fix Kconfig dependencies] broke keyboard interrupts on parrot by making SERIRQ_CONTINUOUS_MODE conditional on CONFIG_CHROMEOS, which it should not be; fix by moving back under main board specific options config. Additionally, Windows [8/8.1/10] fails to enumerate the keyboard when its ACPI entry is located under the SIO device since it is missing an _HID entry, so add the appropriate value per ACPI spec 5 ch. 9.7 Change-Id: Ia69e9b326001d2026b15b4ec03c94f7d03c8a700 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17017 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-25libpayload: increase MAX_ARGC_COUNTJeremy Compostella
MAX_ARGC_COUNT limits the payload to ten parameters which is not enough when used with a proprietary first stage bootloader providing hardware description using around 20 parameters. This patch makes the libpayload able to get up to 32 parameters. Change-Id: I49925040d951dffb9c11425334674d8d498821f2 Signed-off-by: Jeremy Compostella <jeremy.compostella@gmail.com> Reviewed-on: https://review.coreboot.org/17467 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-25AGESA binaryPI: Fix cache-as-ram for x86_64Kyösti Mälkki
AMD_ENABLE_STACK was not called on x86_64 path for AGESA, while it was for binaryPI. Comments on BIST and cpu_init_detected were reversed, so fix those too. Change-Id: I0ddfaf51feb386a56d488c29d60171b05ff6fbc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17551 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-11-24x86 BIST: Fix missing includeKyösti Mälkki
Change-Id: I3d1a456f17073c99c9502da26e09cfde65380746 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17586 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24mc_tcu3: Swap LVDS even and odd lanes for a certain hardwareWerner Zeh
Due to some LVDS cable constraints even and odd lanes needs to be swapped on certain hardware. The hardware ID will be used to distinguish between these two cases. The swapping itself will be done by PTN3460, which is configurable for that. Change-Id: I339b2321a8ed1bc3bbf10aa8e50eb598b14b15fa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/17576 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2016-11-24vendorcode/siemens: Add HWID to hwilibWerner Zeh
Add the location of HWID field so that hwilib supports this value as well. Change-Id: If6d4695f861232231ac8f9c247c0a10410dac1c5 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/17575 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2016-11-24drivers/net/Kconfig: Hide REALTEK_8168_RESET in menuconfigArthur Heymans
Resetting a Realtek 8168 NIC only makes sense on targets that have such a device. Change-Id: I8ac9e8da1d8ecaacb19b4610a9b75f107915d691 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17577 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24mb/ga-945gcm-s2l: Enable EC I/O decode range.Arthur Heymans
Change-Id: I021aae6130c475cb370b891ffaec6f1ad267540b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17580 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24Add Haswell Chromeboxes/Chromebase using variant board schemeMatt DeVillier
Combine existing board google/panther with new ChromeOS devices mccloud, monroe, tricky, and zako, using their common reference board (beltino) as a base. Chromium sources used: firmware-mccloud-5827.B 65bfee7 [haswell: No need pre-graphics delay...] firmware-monroe-4921.B 1ac749d [Monroe: Disable KB/MS in ITE8772.] firmware-tricky-5829.B 2db5322 [haswell: No need pre-graphics delay...] firmware-zako-5219.B eacedef [haswell: No need pre-graphics delay...] Existing google/panther board will be removed in a subsequent commit. Variant setup modeled after google/reef Change-Id: I5d7e0c2551e8b0707841032460c35615cefb2886 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17329 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-24Remove board google/pantherMatt DeVillier
Once #17329 is committed, no reason to have google/panther exist as a separate board anymore. Change-Id: I9a11273c39423d5ff33a7d1f91c8d8cffef97ec1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-11-24driver/pc80/tpm: Runtime generate ACPI table for TPM driverNaresh G Solanki
Runtime write acpi table for TPM driver. Change-Id: I70896e5874c24f17fca0c48b138ad4917b273f5b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17425 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-24arch/x86/acpigen: Write DSM method with multiple UUID'sNaresh G Solanki
Enable generic way of writing DSM method which can write acpi table for multiple UUID's. Change-Id: Ic1fbdc0647e8fdc50ffa407887feb19a63cb48e4 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17424 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-24x86 BIST: Declare function with inline in header fileKyösti Mälkki
Change-Id: Ieb5f1668a715ceadd5fe5ba0d121c865f1886038 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17572 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24soc/mediatek/mt8173/spi.c: Change assert to if statementMartin Roth
Asserts are only fatal if CONFIG_FATAL_ASSERTS is enabled in Kconfig. By default this is disabled, so the assert is generally just a printf. Die if someone decides to pass in an invalid bus number for some reason. Addresses coverity issue 1349858 - Out-of-bounds read Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I9d79bc336cbbfde31f655cfd271f101e7a90ab1b Reviewed-on: https://review.coreboot.org/17484 Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24nb/intel/i82810: Make sure DIMM size isn't negativeMartin Roth
If smbus_read_byte returned an error when reading the DIMM size, this value would be used as an offset into an array. Check for the error, and set the DIMM size to 0 if there's a problem. Addresses coverity issue 1229658 - Negative array index read Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I6461a0fae819dd9261adbb411c4bba07520d076d Reviewed-on: https://review.coreboot.org/17485 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24soc/samsung/exynos5420/uart.c: Init new serial struct variablesMartin Roth
The lb_serial structure had some new entries added, which were not being filled in. Fill in the values so they're not undefined. Addresses coverity error 1354778 - Uninitialized scalar variable Change-Id: Ia7ce07f6e4e058c91c2e063f3225497271ef93ff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17482 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24cpu/allwinner/a10/uart_console.c: Init new serial struct variablesMartin Roth
The lb_serial structure had some new entries added, which were not being filled in. Fill in the values so they're not undefined. Addresses coverity error 1354778 - Uninitialized scalar variable Change-Id: I57f024c35f79397d0e9fd0c800b1b0f4075caac1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17483 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-23northbridge/intel/i5000: Convert 'for(;;)' to 'die'Elyes HAOUAS
Change-Id: I1ceea759a40d740503bde725ad6d72fab4aa7971 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-23AGESA binaryPI: Fix PCI ID namespaceKyösti Mälkki
The defines of device IDs reflects the vendor namespace the ID has been allocated from. Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17510 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-23soc/intel/skylake: Define early smbus functionsNaresh G Solanki
Define early smbus functions that can be used by mainboard to fetch spd. Change-Id: Id170b2b8e6fb3ebb147f37bf433a27d1162dc11c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17433 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-23include/device/early_smbus.h: Declare smbus write functionNaresh G Solanki
Add declaration for smbus write. Early smbus access also needs smbus write function specially to read spd for DDR4 wherein page has to be switched by smbus write. Change-Id: I246cbdf0b52923f01dd036f63df17bf9af043c9f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23google/pyro: Update DPTF settingsKevin Chiu
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU passive point:57, critical point:90 TSR1 passive point:55, critial point:70 TSR2 passive point:65, critial point:80 2. Update DPTF TRT Sample Period. CPU: 5s TSR0: 50s TSR1: 55s TSR2: 120s BUG=none BRANCH=master TEST=emerge-pyro coreboot Change-Id: Ib1b4b31a49d9396b1c5c9dd8d0b9b9998d01744f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17552 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23veyron_*: Remove obsolete ChromeboxesDavid Hendricks
This removes brain, danger, emile, and romy from the tree. This was cherry-picked from the chromeos-2016.02 branch (CL:345574), but conflicts showed up in many files that were to be deleted anyway possibly due to some widespread refactoring that was done between then and now. BUG=chromium:612660 BRANCH=none TEST=none Change-Id: Ie37140a9a4bb9d820a3fcbad6674b2fa737e1249 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1ebe5038a82162f6345e319de7578f26ccd68b73 Original-Change-Id: I11f7e0870916871d8f146a6871370ace76ddec49 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/412424 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17569 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-11-22via/k8t890: Compose a list of PCI IDsKyösti Mälkki
Change-Id: Ic474e17b70d64b63356a0ba7dd1649e5a6ff3a30 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17549 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-11-22src/vendorcode/amd/agesa: Fix castingŁukasz Dobrowolski
When IDSOPT_TRACING_ENABLED is TRUE build fails with "cast from pointer to integer of different size" Use "UINTN" as is done in Family 16h. Change-Id: I362e67fc83aa609155f959535f33be9c150c7636 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17406 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22soc/intel: Use correct terminology for SPI flash operationsFurquan Shaikh
FPR is an attribute of the SPI flash component and not of the SPI bus itself. Rename functions, file names and Kconfig option to make sure this is conveyed correctly. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I9f06f1a8ee28b8c56db64ddd6a19dd9179c54f50 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17560 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of max_transfer_size parameter in spi_slave structureFurquan Shaikh
max_transfer_size is a property of the SPI controller and not of the spi slave. Also, this is used only on one SoC currently. There is no need to handle this at the spi flash layer. This change moves the handling of max_transfer_size to SoC SPI driver and gets rid of the max_transfer_size parameter. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17463 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22mainboard/ms7721: Add MSI MS-7721 (FM2-A57MA-E35)Renze Nicolai
Adds support for the MSI MS-7721 (FM2-A75MA-E35) motherboard. Tested by building coreboot with: - VGA bios (needed for onboard video) - XHCI firmware - SeaBIOS payload CPU: AMD A8-6500 APU RAM: 2x 2GB Samsung M378B5673EH1 Confirmed booting using: - USB stick with Arch Linux (kernel 4.7.5) - Gentoo live CD from SATA dvd drive - Gentoo installation from SATA harddisk (kernel 4.4.26) Change-Id: I757e011de01ca9f340fd524b10e7fa3f291d53e3 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/17495 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-22mainboard/ms7721: Copy files from "asus/f2a85-m" to "msi/ms7721".Renze Nicolai
This patch adds a copy of the Asus F2A85-M code with only minimal changes. (to ensure that the code compiles) A second commit will be published to remove the copied code parts that don't apply to the MS-7221 and to make everything else actually work on the MS-7221 board. Change-Id: I1426c0876c7bfeb264231c0d338301133c721484 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/17494 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-22nb/intel/sandybridge/raminit: Do not log inside busy-wait loopKyösti Mälkki
Time spent in printk() is highly unpredictable, depending of the enabled consoles. If only CBMEM console is enabled, debugstring is repeated tens of times, consuming preram_cbmem_console storage. Change-Id: I2b0d9bd11c294d988a0eb84b90e77d5cc7f1f848 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17516 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22intel/sch: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Untested, only affected board is iwave/iwRainbowG6. Change-Id: Ie3c40ede85c9f89b54804dd2a411645be93911bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17528 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22intel FSP sandy/ivy: Move select MMCONF_SUPPORTKyösti Mälkki
Note: Platforms have no MMCONF_SUPPORT_DEFAULT. Change-Id: I8a02ea78957fca23b1cf161a00d5e3edda73d683 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17543 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22mb/gigabyte/ga-g41m-es2l: Add MAX_CPU = 4 in KconfigArthur Heymans
This motherboard support Intel core 2 quads. Before this change SeaBIOS was not usable, due to it crashing before it got to load anything. Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17537 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21mb/ga-g41m-es2l: Correctly configure PCI IRQ in ACPIArthur Heymans
Obtained from vendor bios DSDT, under "Device (HUB0), Name (_ADR, 0x001E0000)". The schematics also indicate that the INTA-D are hardwired to these PIRQ lines. Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17099 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21drivers/intel/fsp2_0: Check for NULL before using pointerMartin Roth
The cbmem routines pass back NULL on error. Check for this before using the pointer. Addresses coverity issue 1365731 - Dereference null return value Change-Id: I92995366ffb15afd0950b9a8bbb6fe16252b2c38 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17480 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21console/vtxprintf.c: cast precision to size_t for string lengthMartin Roth
If no maximum string length is specified, we're intentionally passing a value of -1 to get the string length so that it's not limited. This makes checking tools unhappy, so actively cast it to size_t before passing it into strlen to show that it's not an accident. Addresses coverity issue 1129133 - Argument cannot be negative Change-Id: I40f8f2101e170a5c96fcd39c217aa414f4316473 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17479 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21nb/intel: Fix some spelling mistakes in comments and stringsMartin Roth
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17478 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>