summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-24soc/mediatek/mt8173: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ib0d6e4e8185ce1285b671af5ebcead1d42e049bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-24soc/nvidia/tegra*: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I873b96d286655a814554bfd89f899ee87302b06d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/marvell/bg4cd: remove cosmos mainboard and bg4cd socAaron Durbin
The SoC code was never completed. It's just a skeleton that gets in the way of refactoring other code. Likewise, the mainboard was never completed either. Just remove them both. Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19823 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-23sb/intel/common: Add common EC fw supportLijian Zhao
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the embedded controller (EC) blob to be added to the final binary through ifdtool. TEST=Add ec.bin and enable in config, build is successful. Change-Id: Ib14732b4d263dde4770bf26b055c005de2540338 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/skylake: Display FPF status of CSMEPratik Prajapati
Field Programmable Fuses (FPF) status maintained by CSME in bits 30:31 of FWSTS6 for Skylake and Kabylake. FPF committed means CSME has blown the fuses. Change-Id: If63c7874e6c894749df8100426faca0ad432384b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/19747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common/block/uart: Add GLK UART pci idsHannah Williams
Change-Id: I08dd7a8c0d42d4ec7c6ff65a82553fe1efbcc424 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19687 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22soc/intel/common/block: Add GLK I2C PCI IDsRavi Sarawadi
Add GLK PCI IDs for I2C to use common I2C code. Change-Id: I2144199345e6382984c367f6a77f0cbb0a93daea Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/19782 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22include/device: Add pci ids for Intel GLKHannah Williams
Change-Id: Ifbca20a0c38cc1fb8ee4b4e336d59e834fcaf57a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19686 Reviewed-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22soc/intel/skylake: Add entry for deep Sx wakeFurquan Shaikh
If deep Sx is enabled and prev sleep state was not S0, then if SUS power was lost, it means that the platform had entered deep Sx. Add an elog entry for deep Sx variant in this case. BUG=b:38436041 TEST=Verified that elog entries are updated correctly: Deep S5: 59 | 2017-05-19 10:39:08 | Kernel Event | Clean Shutdown 60 | 2017-05-19 10:39:09 | ACPI Enter | S5 61 | 2017-05-19 10:39:17 | System boot | 22 62 | 2017-05-19 10:39:17 | EC Event | Power Button 63 | 2017-05-19 10:39:17 | ACPI Deep Sx Wake | S5 64 | 2017-05-19 10:39:17 | Wake Source | Power Button | 0 65 | 2017-05-19 10:39:17 | Chrome OS Developer Mode Deep S3: 66 | 2017-05-19 10:40:11 | ACPI Enter | S3 67 | 2017-05-19 10:40:16 | EC Event | Power Button 68 | 2017-05-19 10:40:16 | ACPI Deep Sx Wake | S3 69 | 2017-05-19 10:40:16 | Wake Source | Power Button | 0 Normal S3: 77 | 2017-05-19 10:43:22 | ACPI Enter | S3 78 | 2017-05-19 10:43:39 | EC Event | Power Button 79 | 2017-05-19 10:43:39 | ACPI Wake | S3 80 | 2017-05-19 10:43:39 | Wake Source | Power Button | 0 Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22elog: Add a new elog type for deep Sx variantFurquan Shaikh
This is useful for debugging based on eventlog to identify if platform entered normal or deep Sx. BUG=b:38436041 Change-Id: Ic7d8e5b8aafc07aed385fe3c4831ab7d29e1f890 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22soc/intel/skylake: Use Intel SATA common codeAamir Bohra
Use SATA common code from soc/intel/common/block/sata and clean up code. Change-Id: Ib5d65f1afda6b2f8098f1c006623a48cf2690593 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel SATA common code supportAamir Bohra
Add SATA code support in intel/common/block to initilalize SATA controller, allocate resources and configure SATA port status. Change-Id: I42ec0059f7e311a232c38fef6a2e050a3e2c0ad3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/skylake: Use Intel PCIe common codeAamir Bohra
Change-Id: Ia9fa22c30fffb1907320667ac37f55db9f3cb7b3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel PCIe common codeAamir Bohra
Add PCIe code support under soc/intel/common/block to initialize PCIe controller, allocate resources and configure L1 substate latency. Change-Id: I0c374317a3fe0be0bb1c5d9b16fcbc5cad83ca42 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22Kconfig: Move and clean up CONFIG_VGANico Huber
Change-Id: I6e710b95cade0ea68f787f33c0070613d64b6da6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-05-22include/console: Use IS_ENABLED() macroNico Huber
Change-Id: I3d0c61c37399e96c1d154c1d3af5c47db967a07a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19763 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22device/oprom/include: Use IS_ENABLED() macroNico Huber
Change-Id: Ibc3bf2f4f1e1bf1ffe9632aa150d549fcd6c201d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19762 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22arch/x86/include: Use IS_ENABLED() macroNico Huber
Change-Id: I0f9a92e595ec765d47f89f0023ff69636ee406af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22drivers/intel/gma: Drop unused INTEL_DPNico Huber
Change-Id: I786848cd48c6fcfecf9b72c60623cadcfcbb7db7 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22nb/intel/haswell: Fix up C NGI remnantsNico Huber
Change-Id: I3cd5e99b9954a68837de85b49b4389b668e00cf4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22mb/intel/wtm2: Drop unsupported native graphics initNico Huber
Since the conversion of this board to soc/broadwell in 0aa06cbf18 (wtm2: Convert to use soc/intel/broadwell), the NGI for this board is not hooked up anywhere. Also, the code doesn't compile anymore. Change-Id: I6387203349b78c8e95333eaf44b345aa30eac7c5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22sb/via/k8t890: Clean up CONFIG_VGA usageNico Huber
Remove guards and let the linker take care of it. Change-Id: I96ad8002845082816153ca5762543768998a5619 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-22nb/intel/x4x: Use a struct for dll settings instead of an arrayArthur Heymans
This makes the code more readable since it avoids messing with two dimensional arrays and needing remember what the indices mean. Also introduces an unused coarse element which is 0 for all default DLL settings on DDR2. Change-Id: I28377d2d15d0e6a0d12545b837d6369e0dc26b92 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-21mb/lenovo/*/romstage: Remove COM IO portPatrick Rudolph
All those boards do not have a serial port. Don't attempt to decode the COMA/COMB IO range. Change-Id: Ide7e818f87e70e3f559d0769ccde89c35da961d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/lenvovo/*: Clean mainboard.c and devicetreePatrick Rudolph
* Move board specific SPI registers to devicetree * Remove unused headers * Remove obsolete methods * Fix coding style * Fix Thinkpad L520 SPI lvscc register Except for Thinkpad L520, no functional change has been done, just moving stuff around. Change-Id: I692a5632030fe2fedbe9a90f86251000f1360fb2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/*/romstage: Don't lock ETR3 CF9GR in early romstagePatrick Rudolph
Do not lock ETR3 CF9GR in early romstage. As of Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 this is done in bd82x6x's finalize handler. Change-Id: Iea091511f0d2a6128d3a19e9413090c85e4c2e57 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21sb/intel/bd82x6x/finalize: Lock ETR3 CF9GRPatrick Rudolph
Lock CF9GR as documented in "100-series-chipset-datasheet-vol-2.pdf" Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21nb/intel/x4x: Make raminit less verbose with CONFIG_DEBUG_RAM_SETUPArthur Heymans
Hides JEDEC steps using the RAM_SPEW macro. Also hides a hexdump of SPDs. Change-Id: Ie2b484cf1f1d296823df0473e852d9d07ca20246 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/gigabyte/ga-g41m-es2l: Enable IO decode range for LPT and FDDArthur Heymans
Change-Id: I77aabf98ea48c6e8bdbe322f89666935f59a289a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-20nb/intel/sandybridge: Use macros to determine min and max of timAArthur Heymans
This improves readability. Change-Id: Ib4387a4f4092053dab273191a73edb0ef31a79f6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-20nb/intel/x4x/raminit: Remove very long delayArthur Heymans
It is not really known why there is such a long delay, but it works fine without it. TESTED on ga-g41m-es2l. Change-Id: Idff5b978bbf161f8520d8000848e7b11c98c3945 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19514 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-20mb/gigabyte/ga-g41m-es2l: Add timestamps in romstageArthur Heymans
Change-Id: I93f43a0af41ae86f1b8ba33e28f3b9f060a5ab5e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-20sb/intel/i82801ex: Remove unused codeArthur Heymans
Only board using this code was tyan s2735 which was removed in f76de841f1 "[REMOVAL] tyan/s2735" Change-Id: I03a101adc1eedfa9669e0b44c54c2c6fa08bd5f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-19mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCFFurquan Shaikh
BUG=b:37712455 Change-Id: Ia3d13ac7c18be8fa92603b6501a2e5df476adcf0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19766 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19mainboard/google/poppy: Fix SPD for micron MT52L256M64D2PP-107Furquan Shaikh
Fix SPD as per the vendor-provided data. BUG=b:37712790 Change-Id: Ib87c316479f4a05e64ca4acb540d7aacfa7338e9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash_internal: Remove unused spi_fram_probe_ramtronFurquan Shaikh
Remove unused function declaration spi_fram_probe_ramtron. BUG=b:38330715 Change-Id: I05e6c5c2b97d6c8a726c0e443ad855f9bcb703f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19706 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Add page_size to struct spi_flashFurquan Shaikh
Add a new member page_size to spi_flash structure so that the various spi flash drivers can store this info in spi_flash along with the other sizes (sector size and total size) during flash probe. This removes the need to have {driver}_spi_flash structure in every spi flash driver. This is part of patch series to clean up the SPI flash and SPI driver interface. BUG=b:38330715 Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Use boot_device_spi_flash to obtain spi_flash structureFurquan Shaikh
Instead of storing spi flash device structure in spi flash driver, use boot_device_spi_flash callback to obtain pointer to boot device spi flash structure. BUG=b:38330715 Change-Id: Idd50b7644d1a4be8b62d38cc9239feae2215103c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/cbfs_spi: Provide implementation of boot_device_spi_flashFurquan Shaikh
This allows callers to retrieve handle to the boot device spi_flash structure. BUG=b:38330715 Change-Id: I1c07327115e0449cbd84d163218da76a6fa2cea0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-19mainboard/lenovo/t430: Add Thinkpad T430 supportPhilipp Deppenwiese
Tested and working: * HDD LED * Booting GNU Linux 4.9 from HDD using SeaBios * Booting GNU Linux 4.9 from USB using SeaBios * Native GFX init * All Fn function keys * Speakers * PCIe Wifi * Camera * WWAN * Fan (Dynamic Thermal Managment) * Flashing using internal programmer * Dual memory DIMMs running at up to DDR3-1866 * AC events * Touchpad, trackball and keyboard * USB3 ports running at SuperSpeed * Ethernet * Headphone jack * Speaker mute * Microphone mute * Volume keys * Fingerprint sensor * Lid switch * Thinklight * TPM (disable SeaBios CONFIG_TCGBIOS) * CMOS options: ** power_on_after_fail ** reboot_counter ** boot_option ** gfx_uma_size ** usb_always_on Untested: * Booting Windows * Hybrid graphics * Docking station * VGA Broken: * Wifi LED is always on Change-Id: I5403cfb80a57753e873c570d95ca535cf5f45630 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-19mb/lenovo/t400: Generate undock event with dock buttonArthur Heymans
Change-Id: I1161ed5f5c30201d2ad156d8fce4e8a90e65bff6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-19nb/intel/sandybridge: Hide additional nb devicesPatrick Rudolph
Hide device 4 and device 7 if disabled. Allows devicetree settings to take effect. Tested on Lenovo T430. Change-Id: I64a19e2bbdb1640e1d732f6e4486f73cbb0bda81 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-18rockchip/rk3399: soc: resize reserve memoryXing Zheng
Reserve the whole TZRAM area because it will be marked as secure-only by BL31 and can not be accessed by the non-secure kernel. CQ-DEPEND=CL:452659 BUG=chrome-os-partner:57361 BRANCH=firmware-gru-8785.B TEST=the reserve memory is resized Change-Id: Ie3ab39598f3f7cb96feb0c574e230e7fcb53a1a4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f34d254e1dfc9ae95a784aba22503e75a2fa65f1 Original-Change-Id: I39c4cb530f41a7b0f7f3064125072dd85b62276f Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/418102 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-(cherry picked from commit ea9fe064a9b1e1ce81fca74f829a0fb6e78ce426) Original-Reviewed-on: https://chromium-review.googlesource.com/452640 Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-183rdparty/arm-trusted-firmware: Update to upstream masterMartin Roth
Submodule 3rdparty/arm-trusted-firmware 236c27d21f..3944adca59 This brings in 241 new commits from the upstream arm-trusted-firmware repository, merged to the upstream tree between December 30, 2016 and March 18, 2017. 3944adca Merge pull request #861 from soby-mathew/sm/aarch32_fixes .. e0f083a0 fiptool: Prepare ground for expanding the set of images at runtime Also setup ATF builds so that unused functions don't break the build. They're harmless and they don't filter for these like we do. Change-Id: Ibf5bede79126bcbb62243808a2624d9517015920 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18cbmem_console: Improve 'cbmem -1' behavior for truncated pre-CBMEM logsJulius Werner
The 'cbmem -1' flag that cuts off console output before the last boot will ignore content from earlier stages if it was truncated due to lack of pre-CBMEM console space. This patch makes the "log truncated" message more specific and adds it as an additional cut-off marker to 'cbmem -1' to counteract that problem. Also raise the log level of the coreboot banner one step to BIOS_NOTICE to make it more likely to be included in the output for 'cbmem -1' to find. (I believe NOTICE is reasonable but I wouldn't want to go as far as WARN which should be reserved for actual problems. Of course this is not ideal, but then again, our whole log-level system really isn't... it would be better if we could make it always print a banner to the CBMEM console without affecting the UART at the same time, but that would require a larger amount of work.) Change-Id: I58288593dfa757e14f4a9da4ffa7e27b0b66feb9 Reported-by: https://ticket.coreboot.org/issues/117 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18vbe: remove the necessity for a global vbe_mode_info_valid()Aaron Durbin
There's no users of vbe_mode_info_valid() aside from the local compilation units. Remove the declaration and make the function static to the current global implementers. Change-Id: I4872ac6ad15ba6a86bba69d51a8348b9921c152d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-18coreboot_tables: specify clear interface for lb_framebuffer()Aaron Durbin
For some reason the "interface" for adding framebuffer information is sitting in src/include/vbe.h while also guarding the call to fill_lb_framebuffer() with vbe_mode_info_valid() along with some macro if CONFIG_* for good measure. Move the fill_lb_framebuffer() declaration to coreboot_tables.h and provide a comment about how it should be used. Also, now that there's no need for the notion of a global vbe_mode_info_valid() remove it from the conditional call path of fill_lb_framebuffer(). Change-Id: Ib3ade6314624091ae70424664527a02b279d0c9b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-18uart: Fix bug in {uart8250, uart8250_mem, ns16550}_rx_byte functionsWerner Zeh
We have several different UART implementations of which three support a timeout when receiving characters. In all of these three implementations there is a bug where when the timeout is hit the last received character will be returned instead of the needed 0. The problem is that the timeout variable i is decremented after it has been checked in the while-loop. That leads to the fact that when the while-loop is aborted due to a timeout i will contain 0xffffffff and not 0. Thus in turn will fool the following if-statement leading to wrong return value to the caller in this case. Therefore the caller will see a received character event if there is none. Change-Id: I23ff531a1e729e816764f1a071484c924dcb0f85 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18binaryPI: Fix UMA calculationsKyösti Mälkki
Vendorcode decides already in AMD_INIT_POST the exact location of UMA memory. To meet alignment requirements, it will extend uma_memory_size. We cannot calculate base from size and TOP_MEM1, but need to calculate size from base and TOP_MEM1 instead. Also allows selection of UmaMode==UMA_SPECIFIED to manually set amount of memory reserved for framebuffer. Change-Id: I0c375e5da0dfef6cef0c50272356cd32a87b1ff6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18AGESA: Fix UMA calculationsKyösti Mälkki
Vendorcode decides already in AMD_INIT_POST the exact location of UMA memory. To meet alignment requirements, it will extend uma_memory_size. We cannot calculate base from size and TOP_MEM1, but need to calculate size from base and TOP_MEM1 instead. Also allows selection of UmaMode==UMA_SPECIFIED to manually set amount of memory reserved for framebuffer. Change-Id: I2514c70a331c7fbf0056f22bf64f19c9374754c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-05-18AMD MTRR: Add common add_uma_resource_below_tolm()Kyösti Mälkki
Change-Id: I9eee88dc619ac5d9c77153db522a6ead65f6c9b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-18CBMEM: Add config CBMEM_TOP_BACKUPKyösti Mälkki
AGESA and binaryPI boards have no easy way to determine correct cbmem_top() location early enough when GFXUMA is enabled, so they will use these functions with EARLY_CBMEM_INIT as well. At the end of AmdInitPost() the decisions of UMA base and size have not been written to hardware yet. The decisions are stored inside AGESA heap object we cannot locate from coreboot proper until after AmdInitEnv(). Modify code such that weak backup functions are only defined for LATE_CBMEM_INIT; they are somewhat troublesome to handle. Change-Id: Ifef4f75b36bc6dee6cd56d1d9164281d9b2a4f2a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19306 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel works Change-Id: I52f8f8f966034f5273d7c2e673e5ebdd9dccf748 Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18rockchip/rk3399: Add MIPI driverNickey Yang
This patch configures clock for mipi and then adds mipi driver for support innolux-p079zca mipi panel in rk3399 scarlet. Change-Id: I02475eefb187c619c614b1cd20e97074bc8d917f Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18rockchip/rk3399: remove the delay for enabling SSCCaesar Wang
The hang was caused by deasserting the reset before, it had been delayed 20us fixing the hang issue. So we can remove this delay for now. Change-Id: I5545377b72eb20b59ceaaca25c78965854bfb919 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-17siemens/mc_apl1: Program eMMC DLL settingsMario Scheithauer
Program eMMC DLL settings for mc_apl1 mainboard, after that system can boot up with eMMC successfully. Change-Id: I3d60f66ec5c7e09540ccda59f244aac6f78bf954 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-17siemens/mc_apl1: Select external 8250 UARTMario Scheithauer
The mainboard siemens/mc_apl1 uses an external I/O port for console output. For this reason we need to activate the 8250 LPC UART. Change-Id: Ib5616a116aec6135191bdce95f9f9566ce13d6f1 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-17soc/intel/apollolake: Enable decoding for ComA and ComB on LPCMario Scheithauer
If there is an external 8250 UART, one needs to enable the appropriate address ranges before console_init() is called so that the init sequence can reach the external UART. Furthermore FSPM needs different settings for an external UART port. For this, the function fill_console_params() has to be adapted. Change-Id: I62c7d0b54edd18acf793849aef352afbcaeb68b9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-17mb/google/eve: Remove FPC device from SPI1Duncan Laurie
This device is no longer directly connected to the SOC so it does not need to be enabled in coreboot. BUG=b:35648259 TEST=build and boot on Eve Change-Id: I4ed5a5575ce51ba5f6f48b54fab42e00134ea351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19728 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-17mb/google/eve: Update touchpad I2C timingDuncan Laurie
The touchpad frequency was still slightly above 400kHz so tweak the timing values manually to get under the spec limit. BUG=b:35583133 TEST=verified the bus frequency with a scope to be < 400kHz Change-Id: I8bd071a8e15a791b7551ac256797e87abd6b5e5a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19727 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-17mainboard/google/poppy/variants/soraka: Enable H1 I2C TPMFurquan Shaikh
1. Add a separate devicetree file for soraka variant and add H1 node. 2. Enable H1 TPM for soraka. BUG=b:36265511 Change-Id: Id9947dce9b7f755971f0199f043af8d251d275ab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19519 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-05-17mainboard/google/poppy: Correct I2C bus number for TPMFurquan Shaikh
TPM is on I2C bus 1. Fix that. BUG=b:36265511 Change-Id: I7fb696ca7281a0c099dd325d794dd4551cf20a53 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19710 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-17google/fizz: Configure SATAXPCIe GPIOs to use native functionShelley Chen
BUG=b:37486021, b:35775024 BRANCH=None TEST=reboot and ensure that device detects SSD Change-Id: I4a85b9f3ba1d0a4c0a753420e166d3353417a1d1 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2017-05-16soc/intel/common: Add sanity check of PCR_BASE_ADDRESSLijian Zhao
PCR_BASE_ADRESS may be zero if SOC Kconfig didn't define the non zero default value. TEST=Remove the PCR_BASE_ADDRESS config in Apollolake Kconfig file and build. BUG=None Change-Id: I396aa1a3e89507c90e17229a986de5d2c0887c9c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16soc/intel/skylake: Add option to enable/disable EISTSubrata Banik
Set MSR 0x1A0 bit[16] based on EIST config option. Default Hardware Managed P-state (HWP) also known as Intel Speed Shift is enabled on SKL hence disable EIST and ACPI P-state table. Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-16soc/intel/skylake: Configure C-state interrupt response timeSubrata Banik
Program C3/C7/C10 interrupt response time for all cores. Change-Id: I4f47502e1c212118d7cc89d4de60a1854072964a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-16cpu/intel/turbo: Add option to disable turboSubrata Banik
disable_turbo function can be used to disable turbo mode on each processor by settings MSR 0x1A0 bit 38. This option will help to perform some quick test without enabling turbo mode. Change-Id: If3e387e16e9fa6f63cb0ffff6ab2759b447e7c5c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16util/release: Update build-release scriptMartin Roth
- Put parameter comments and help text in the same order as the actual parameters. - Don't clone a new release tree from coreboot.org if a tree already exists. - Change COMMIT_ID parameter from optional to required. If it was omitted previously, the head of the master branch would be used. Change-Id: Ifa434a4911dec777004788e3cf4e3436875d929b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-05-16arch/arm64: Use variables of the right size for msr/mrs opcodesPatrick Georgi
They do 64bit accesses, and gcc does the necessary fix ups to handle 32bit values as zero-padded 64bit values. clang, however, isn't happy with it. Change-Id: I9c8b9fe3a1adc521e393c2e2a0216f7f425a2a3e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/19661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-16xcompile: replace -print-librt-file-name with -print-libgcc-file-namePatrick Georgi
The former only exists with a custom patch while the latter is supported by clang and in the absense of libgcc even points to clang's own runtime libraries. Change-Id: I1e30d5518cf78e1d66925d6f2ccada60a43bb4f8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/19658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-15vexpress: change to write32Vladimir Serbinenko
Change-Id: I5fcc83328441ccfb34ee63a7406d26e393633c21 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/19685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-15util/cbmem: mmap underflow on low addressesAaron Durbin
There is code to adjust the mapping down if a mmap fails at a physical address. However, if the address is less than the page size of the system then the physical offset will underflow. This can actually cause a kernel panic on when operating on /dev/mem. The failing condition happens when the requested mapping at 0 fails in the kernel. The fallback path is taken and page size is subtracted from 0 making a very large offset. The PAT code in the kernel fails with a BUG_ON in reserve_memtype() checking start >= end. The kernel needs to be fixed as well, but this fallback path is wrong as well. BUG=b:38211793 Change-Id: I32b0c15b2f1aa43fc57656d5d2d5f0e4e90e94ef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-14.gitignore: ignore blobtool binaryMartin Roth
Change-Id: I2fa1548ba1906db80ce3119eec58de9629f91ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-13vexpress: add gfx initVladimir Serbinenko
Change-Id: I0eff29b74d7df331dcbf2c25799eaae4911e54fc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-13src/include/device: Add PCIe root ports device idsAamir Bohra
Change-Id: Ic2df7fb1e4a3d3c52561b949c4b359ea59824387 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19664 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-13drivers/pc80/rtc: Rename mc146818rtc_early.c -> _romcc.cNico Huber
And don't link it. It's for ROMCC. To make code happy that uses the ROMCC interface read_option(), read_option_lowlevel() is ported to mc146818rtc.c along with a message to use get_option() instead. Change-Id: I54ea08de034766c8140b320075d36d5e811582fa Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-13mainboard: Add ASRock G41C-GSArthur Heymans
Start-point is Gigabyte GA-G41M-ES2L. This board features a G41 northbridge and an ICH7 southbridge. This board has slots for both DDR2 and DDR3 (cannot run concurrently though) but only DDR2 is implemented in coreboot. The SPI flash resides in a DIP-8 socket. Tested and working: * DDR2 dual channel (PC2 5300 and PC2 6400, though raminit is picky with assymetric dimm setups); * 3,5" IDE; * SATA; * PCIe x16 (with some patches up for review); * Uart, PS2 Keyboard; * USB, ethernet, audio; * Native graphic init; * Fan control; * Reboot, poweroff, S3 resume; * Flashrom (vendor and coreboot). Tested but fails: * DDR3 (not implemented in coreboot). Tests were run with SeaBIOS and Debian sid, using Linux 4.9.0. Change-Id: I992ee07b742dfc59733ce0f3a9be202a530ec6cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-13nb/intel/x4x: Fix uninitialized variable issueNico Huber
A left-over from 5e3cb72a71 (nb/x4x: Do not enable IGD when not supported). Should fix coverity issue 1375009. Remove a redundant line that uses the variable `gfxsize` out of its scope and move the variable declaration. Make sure the variable is always initialized, drop unneeded error-handling for `get_option()` and sanitize the read value instead. Change-Id: Iee2beda30d8c74df0f412622c3ff3357819e386b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19680 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-12mb/gigabyte/ga-g41m-es2l: Don't disable PATAArthur Heymans
This board features a PATA port. TESTED PATA drive works in SeaBIOS and OS. Change-Id: I74dc72c22e6c4fed07f28ef7d88adde54656ae39 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-12mainboard/google/reef: Config needed GPIO for pull-up WALijian Zhao
This change is needed to minimize circuit level stress, by adjusting circuit voltage for proper operation. For mem config GPIO changes: To avoid leakge as those pins have internal 20K pull and 3.3K pull down on mainboard, change internal pull up to none. BUG=b:37998248 TEST=Boot up into OS and enter s0ix. Change-Id: Id82035d8e1fff9fbb8dd3b4125460cdf61a58488 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19577 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-12soc/intel/apollolake: Add macro to define IOSTERM for GPIO configLijian Zhao
Add macro to config GPIO IOSTERM bits. BUG=b:37998248 Change-Id: I178f6d3055d4620cb3c895245c40f324383873ad Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19576 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-12drivers/storage: Delay after SD SWITCH operationsLee Leahy
Delay for a while after the switch operations to let the card recover. TEST=Build and run on Galileo Gen2 Change-Id: I938e227a142e43ed6afda80d56af90df0bae1b05 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-12qemu/vexpress-a9: Discover RAM size.Vladimir Serbinenko
Probe RAM to find its size instead of hardcoding 1024M. Also properly export it to memory map. Change-Id: Ib411f0a068bd247a9e0cd0a59689a3896921483e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-12intel/common: drop duplicate initializerPatrick Georgi
Change-Id: I99d0bd7d9b897a10edce35316e095e0223522c54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Found-by: clang Reviewed-on: https://review.coreboot.org/19656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Edward O'Callaghan <quasisec@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-12vendorcode/intel/fsp/fsp2_0/glk: Add FSP header files for GLKHannah Williams
from FSP release V030_61 Change-Id: I5ecba08de851ee2e362f9ac31e1fa8bf3dfceebb Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19605 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-11nb/intel/gm45: Fix raminit with mixed raw card typesTristan Corrick
`cardF[n]` should indicate whether the DIMM in channel n is of raw card type F. However, `cardF[1]` was initialised with the value meant for `cardF[0]`. This patch results in the correct initialisation of `cardF`. Tested on a Lenovo T400 containing two DIMMs: one of raw card type F and the other of raw card type B. Before the patch, the system would not boot. After the patch, the system boots with all of the memory functional. Change-Id: I7409df0b8c67d7efbdadae39dc718c8df7a92552 Signed-off-by: Tristan Corrick <tristancorrick86@gmail.com> Reviewed-on: https://review.coreboot.org/19652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11nb/intel/gm45: Fix some errors/warnings given by checkpatchTristan Corrick
This results in raminit_receive_enable_calibration.c producing no errors or warnings with checkpatch. The issues fixed are: ERROR: that open brace { should be on the previous line WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Tested by compiling after making the changes. Change-Id: I8d2f4f1fe2f17aa44c0a7090c178eee418defe78 Signed-off-by: Tristan Corrick <tristancorrick86@gmail.com> Reviewed-on: https://review.coreboot.org/19651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11mainboard/pcengines/apu2: Add LPC TPM supportPhilipp Deppenwiese
APU2 exposes a LPC header which can be used in conjunction with a LPC TPM module. Change-Id: If9312370a5071ffbeb6d83888c75fa69a0c27819 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-11amd/pi: Add AMD fam16h TPM ACPI path supportPhilipp Deppenwiese
Change-Id: I5322d731a0dc655f2da14b87fa6cbc1e54b5abd5 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-11util: Add tools for dumping and inserting KBC1126 firmware images.Iru Cai
Change-Id: Ic521b177b9602ff042312cccaaa89371db7c5855 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-11mb/sapphire/pureplatinumh61: Sanitize KconfigNico Huber
Remove overrides that set platform defaults or insane values. Change-Id: I11d1c7155bf1c7f9298f60638a6c2f3b128f3fe8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicola Corna <nicola@corna.info>
2017-05-11siemens/mc_apl1: Add usage of external RTC RX6110 SAMario Scheithauer
This mainboard contains an external RTC chip RX6110 SA. Enable usage of this chip and set some initialization values to device tree. Change-Id: I5aceb4401f0bb059ef893dfe7d157716c82e4a76 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-11drivers/i2c: Add new driver for RTC type RX6110 SAMario Scheithauer
This driver enables the usage of the external RTC chip RX6110 SA (http://www5.epsondevice.com/en/products/i2c/rx6110sab.html) which is connected to the I2C bus. The I2C address of this device is fixed. One can change parameters in the device tree so that the used setup can be adapted to match the configuration of the device on the mainboard. Change-Id: I1290a10c2d5ad76a317c99c8b92a013309a605d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-11mb/lenovo/x60/t60: Remove `fn_ctrl_swap` optionNico Huber
The EC doesn't support it. Change-Id: Id2964002406a5fcf992f0ffc3627e3f66a2bb13f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 01:22:14 +0000