| Age | Commit message (Collapse) | Author |
|---|
|
Since this works on Yorp and Bip, we should enable EC SW sync for all
known boards so that it doesn't get forgotten.
BUG=None
TEST=None
Change-Id: Ifee8e0b6620dc7554160a10a8e4663db25b6413d
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/27755
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduces new and required GPIO APIs, using common pinmux
definitions for GPIO configuration.
TEST=build & run
Change-Id: I8cef9dae2072da32cb0678efefeb8f0070cdde9c
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Reviewed-on: https://review.coreboot.org/26233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With commits 9987534 [southbridge/intel: Remove leftover TPM ACPI code]
and 66ce18c [soc/intel: Remove legacy static TPM asl code] removing
TPM ASL code from the southbridge's LPCB device, the LPC TPM chip driver
(drivers/pc80/tpm) must be added to devicetree in order to ensure the
new acpigen code is used to replace it.
Test: boot various google/samsung boards, verify SSDT created with
LPBC.TPM device and TPM visible to and usable by SeaBIOS and Linux
Change-Id: Iedaa01f26fb357914549bb3dda24b0bd6ef67480
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27786
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1c81eb7c8ed0b819bb76196208cc1269180aca55
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
To install this hook, run
make install-git-commit-clangfmt
This will install a pre-commit-msg hook that runs clang-format
on all .c and .h files that are staged.
It will add a clang-formatted-by: <git username>
line to the commit message to indicate that clang-format
was run on the files and that further processing of them
is not needed.
Change-Id: I1773f55b5b4677dad8f4bea017b6328fd93df20c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/27779
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This effectively means it is possible to run another bootblock located at
top_of_flash - 64K.
The i82801gx southbridge has the ability to swap the two top 64K ranges by
flipping the BUC.TS bit (RCBA[3414] bit0).
This allows coreboot to build roms with a bootblock at the top swap offset by
selecting CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK.
Change-Id: Id96e10aea3e5fd955d45287134eb8643be414de9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
src/arch/riscv/stages.c is an entry of romstage/ramstage, and does not
needs to be bootblock.
src/arch/riscv/id.S src/arch/riscv/id.ld is used to generate some
compile/board/time information, which is repeated with src/lib/version.c
Change-Id: Ic736b378e24df387584c5f86a2b04078fc55723d
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27557
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
2 bits of LPC host control were originally not public, and wrongly
identified as IMC related. Now that the bits are available in public BKDG,
fix the naming of the bits.
BUG=b:111912080
TEST=build and boot grunt.
Change-Id: I1921f46c6be54eda6329c98267cec27004caadd5
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27744
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a function to overwrite AC/DC loadlines for differnt
projects.
BUG=b:111761175
BRANCH=None
TEST=emerge-nami coreboot chromeos-bootimage and use DCI to dump
AC/DC loadline settings. Tested on Vayne and Akali.
Change-Id: Id0068c5334c257b9f4c32b6088becbfe8391a864
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch doesn't change the hash of a timeless build.
Change-Id: I5d329f65be0eee741fd330c0926881ff4f956624
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I01bd69605760e8a03787dcfa3da9f47576e3144a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This patch contains the parts that changed the hash of the generated binary;
probably due to the compiler optimizing things slightly different.
Change-Id: Ide0b3296864e24edb646956e47221bfef8182e3d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27725
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the
resulting binary doesn't change with applying this commit.
Change-Id: I2b1dc8befa3381f3edac06704e31e7ef50f86fa4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27724
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d91674ebd281a595e7c0462671f4715ca09cb5c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27723
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: I598b056d5fb1ce23b390b2f0ab4e9fb242d3685a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27242
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Iea5a09c62cca102b2c211e9256295c24cf3e9fa0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27243
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Iabfd15884ec8feb846d01b6af3c4afe5c1494feb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27245
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci ops happen to work on this struct device since the device_path is an union.
This patch still keeps adding the fixed resources in the pci_domain
ops since moving it to the PCI ops which could properly use the
function argument for PCI operations would require all PCI IDs to be
added or else breakages are to be expected.
Change-Id: Id73c16fad4fb9ece78595844a39da993d169f057
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27244
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specifically PCI device ID for graphics and PCI device ID for northbridge.
Change-Id: Ide237d3274df0543409c8a23b9bb50c8e0a6b7a3
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/27519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kin Wai Ng <kin.wai.ng@intel.com>
|
|
These additions make a better fit to our style, they
are adapted from those done for Linux.
Change-Id: I664c9d1503e3bb7bedcd617e15d2d2c57e19bdff
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/27752
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change f849972 (security/vboot: Enable TCPA log extension) enabled
support for adding TCPA log to CBMEM. However, if CBMEM is not online,
this function doesn't do anything and returns early. This condition is
not really a valid error condition as it depends on when the call to
tcpa_log_add_table_entry is made. Since tcpa_log_add_table_entry
returns -1 when cbmem is not online, tpm_extend_pcr prints an error
message with prefix "ERROR:". This can confuse any scripts trying to
catch errors in boot flow.
This CL makes the following changes:
1. Removes the print in tpm_extend_pcr since tcpa_log_add_table_entry
already prints out appropriate ERROR messages in case of failure to
add log entry.
2. Since the return value of tcpa_log_add_table_entry is not used
anymore, return type for tcpa_log_add_table_entry is changed to void.
BUG=b:112030232
Change-Id: I32d313609a3e57845e67059b3747b81b5c8adb2a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Add lpddr4 skus for new memory sources K4F6E3S4HM-MGCJ and MT53E512M32D2NP-046.
BUG=b:111964159
BRANCH=master
TEST=emerge-octopus coreboot chromeos-bootimage
Change-Id: Id39a332998b28262e5aa45822078f3c4087f163f
Signed-off-by: nickchen <nickchen@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27747
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This never got enabled for fleex; we should enable this to make it
easier to have updated EC firmware.
With this commit, here's the relevant console messages:
sync_one_ec: devidx=0 select_rw=4
update_ec: Updating RW(active)...
Trying to locate 'ecrw' in CBFS
update_ec: image len = 137580
EFS: EC is verifying updated image...
send_packet: CrosEC result code 1
EFS: EC doesn't support EFS_VERIFY command
vboot_hash_image: No valid hash (status=0 size=0). Compute one...
print_hash: RW(active) hash: 35ba735cf97dd990f6f7f0895264382aa20beb4e7ba57270b0a7b24686e26afd
Trying to locate 'ecrw.hash' in CBFS
sync_one_ec: jumping to EC-RW
send_packet: CrosEC result code 12
EC returned from reboot after 27753us
BUG=b:112038021
TEST=Successful boot after EC update via sync
Change-Id: I2dc97c8e2b07f3bdef0d723789cc12c23b32c135
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/27753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add short explanation of Utility list
Change-Id: I5fc45ebe29cd42c1aa18c59dabc3ac3db3107bd7
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
* Update kernel version
* Add kernel directory removal during clean target
* Add x86 and x86_64 default configs
Change-Id: I6793bffd2c537a0e9fe7c07abbea99b28defb52e
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27745
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When I tried to compile the RISC-V code (202e7d4f3c), I found some errors:
`PRIu64` is undefined
src/arch/riscv/timestamp.c does not exist
Currently RISC-V does not have the implementation and use of timestamp,
so I temporarily delete the code related to timestamp in the Makefile.
And define PRIu64.
Change-Id: I7f1a0793113bce7c1411e39f102cf20dbadda5d6
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fix 6 new errors found by shellcheck 0.4.6
SC2155: Declare and assign separately to avoid masking return values.
4 x SC2086: Double quote to prevent globbing and word splitting.
SC2196: egrep is non-standard and deprecated. Use grep -E instead.
One of the SC2086 errors is masked because it needs word splitting.
Change-Id: I7f869e6d208f7247f739619c538be6075b802719
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
|
|
- Use TARGET variable for location of passing/failing boards files.
This should better handle the directory, wherever it is.
- Don't save make.log location if make.log is being deleted.
Change-Id: I28e55feef85c9b642ac5ff70ecef113cf7978707
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add support for libgfxinit
Test: boot stumpy, verify all outputs operational prior for pre-OS display
Change-Id: Ia720814c2225502316de5c5e9639c67df65a2ed0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The careena board requires a different setting within VBIOS in order to
pass the eDP eye diagram test. Update all kahlee boards to use the new vBIOS.
CQ-DEPEND=CL:1153080
BUG=b:111673328
TEST=Verify, via SOME unspecified method, that the new vBIOS is built into
the Grunt/Careena ROM files.
Change-Id: I268cd3dbce6ba1f7bd781d768f470463846a4e10
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27643
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of the
Stoney Ridge APU. Systems are expected to implement an external EC for
desired features. Remove all stoney IMC files and functions from vendor code.
BUG=b:111780177
TEST=Build grunt and gardenia
Change-Id: I06e993fa498cc0978c1d037bc6001682407f7fac
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27652
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of
the Stoney Ridge APU. Systems are expected to implement an external EC
for desired features. Remove all stoney IMC files and functions from
src/soc/amd/stoneyridge.
There are 2 "IMC bits" left (and used) that are not truly IMC. New BKDG
describe these bits, so a new patch will be released later to fix the
names and comment.
BUG=b:111780177
TEST=Build grunt and gardenia
Change-Id: I6a24e4c3f03d04713a030b884c611d9c64c4cb3a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27651
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per AMD, the Integrated Micro Controller is not a supported feature of the
Stoney Ridge APU. Systems are expected to implement an external EC for
desired features. Remove IMC files and functions from gardenia.
BUG=b:111780177
TEST=Build gardenia
Change-Id: I570b7f8e364b0c2937592590cc033d5a6c9fade0
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27650
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the
resulting binary doesn't change with applying this commit.
Change-Id: I057abe314622e92000c7e4ff2faa4595edb5244b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This makes i82801ix use the common smm southbridge code to set up smm
relocation and smi handler setup. This is needed in this change for the
the smm relocation code relies on some southbridge functions provided
in the common code. Some of the old code is kept for the Q35 qemu
target.
This also caches the TSEG region and therefore increases MTRR usage a
little in some cases.
Currently SMRR msr's are not set on model_1067x and model_6fx since this needs
the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled
properly in the subsequent parallel mp init patchset.
Tested on Thinkpad X200: boots and going to and resuming from S3 still
works fine.
Change-Id: Ic80c65ea42fcf554ea5695772e8828d2f3b00b98
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23419
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie95321f3eb6fb17b17eb25e8a54670654c373706
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to the "Intel® 64 and IA-32 Architectures Software Developer’s Manual"
the SMRR MSR are at a different offset for model_6fx and model_1067x.
This still need SMRR enabled and lock bit set in MSR_FEATURE_CONTROL.
Change-Id: I8ee8292ab038e58deb8c24745ec1a9b5da8c31a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This code was copied from x86. It is not needed for RISC-V.
Change-Id: If6c3bfdc4090e45d171e68a28d27c38dabe91687
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/27544
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Store the power on defaults in the _REG method after the ERAM region
is ready for use. It might not be ready when accessed from _INI.
Tested on Lenovo T430.
Change-Id: I70f22f8ac61dd850180fa159313bb0f8e4ab31d9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibb13627bcd2ad023f7686b5ae0bd7331e09cf5b4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ife344d1699a2eff7d93738221a0e87d0481f05d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: If4d6c80e95469341f0c978f302f04508f50280bd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Id42bbea1f2deb0be80af2c8008045d37a926126a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ie95d9c04375e0125bae9bc01ae5caef423faf33e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The careena board needs different video settings to pass eye diagram test,
which does not affect negatively the grunt board. In preparation for new
VBIOS, AGESA environment needs eDP high vdiff enabled.
BUG=b:111673328
TEST=Add debug code to AGESA to display set eDP. Build AGESA. Build and
boot grunt. Add new code to grunt, build and boot, verify eDP changed.
Change-Id: I3e6b409699e8192eb39cc189628ff95b9f985e54
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The careena board needs different video settings to pass eye diagram test,
which does not affect negatively the grunt board. In preparation for new
VBIOS, create code that allows changing eDP training parameter.
BUG=b:111673328
TEST=Tested in child patch.
Change-Id: Ic0452618bfc5e05b9ef8280bb8ba398ec7b4ce95
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- add Nanya NT6CL256T32CM-H1 to memory strapping table
BUG=b:111906760
BRANCH=none
TEST=none
Change-Id: I1432b9ab84f01a7fee1bc562aa40c714ddbf639e
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Caveh Jalali <caveh@google.com>
|
|
This change primarily moves the PowerResource up to a more common scope so
that the _PRx references are simpler. The ^ scope modifier isn't well
supported everywhere amongst OSes and drivers. Windows 10 will BSOD
early during boot with ACPI_BIOS_ERROR (code 0x6, which means it could
not find the object referenced by a _PRx) with the way things are currently
laid out).
I've also not seen a firmware outside of coreboot that tries to reference
count _ON and _OFF. Isn't it up to the OS to deference count, and whatever
it tells ACPI is what should happen (i.e., on means on and off means off)?
Some of the _UIDs are also duplicated. This change makes them unique.
A few cosmetic changes are made so that diffing cam0.asl against
cam1.asl has fewer extraneous differences.
Change-Id: I9c9f6c712b075450539d5b84ac5bb221b3cbb57e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
|
|
Adapted from chromium commit 7633daa
[caroline: Change debounce time for jack insertion and ejection]
We are using max debounce time. During this time line, MICBIAS will be
zero because of jack chasis. At the moment we got 0 button (PLAY/PAUSE)
We need to reduce this time to below 100ms for caroline device.
BUG=b:79559096
TEST=see there is no more irq before jack insertion/ejection irq
complete
Original-Change-Id: Ib6abdb4ff041823ca89f74cf59e2bfa644bb0d6a
Original-Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/1143109
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wonjoon Lee <woojoo.lee@samsung.com>
Change-Id: I8f605989d6ffc8a75127ed6722e7a37db95029ed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27659
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On kukui board, the eMMC is routed to EC for boot ROM emulation when
loading bootblock, and should be set back to real eMMC as early as
possible after bootblock is loaded.
BUG=b:80501386
TEST=make; boots and verified BOOTBLOCK_EN_L GPIO is enabled.
BRANCH=None
Change-Id: Ifefb2e26ed048c38595907cc0875757410129828
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/27601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 4 helper functions to get microcode info.
* get_current_microcode_rev
return the the version of the currently running microcode.
* get_microcode_rev
extract microcode revision from the given patch.
* get_microcode_size
extract microcode size from the given patch.
* get_microcode_checksum
extract checksum from the given patch.
The simpler thing would be to just move the struct microcode
to microcode.h so that the structure members can be dereferenced.
To encapsulate the structure details added the helper functions.
This information will be used in future to compare microcodes for update.
Change-Id: I67a08ba40b393874d8cc17363fefe21e2ea904f3
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/27365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RTC BUC control register provides a software interface to
configure the top swap feature. This patch adds implementation
to enable/disable top swap feature and gets it accessible in
romstage as well.
The top swap control functions are exposed only if INTEL_HAS_TOP_SWAP
is selected.
To use the topswap feature a second bootblock has to be added
to the cbfs. Below configs aid in doing that,
INTEL_HAS_TOP_SWAP
INTEL_ADD_TOP_SWAP_BOOTBLOCK
INTEL_TOP_SWAP_BOOTBLOCK_SIZE
Enabling and Disabling topswap, using the added API enables user
to boot alternatively from either bootblock.
Change-Id: Iea31b891f81e76d4d623fcb68183c3ad3dcadbad
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/25805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable power to FPMCU by default on power-on and deassert
the PCH_FPMCU_RST_ODL reset line.
BUG=b:111880258
BRANCH=none
TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot
nocturne to kernel, login and execute "powerd_dbus_suspend" at kernel
prompt, wait a few seconds, press power button to wake, then execute
"cat /var/log/cros_fp.log | grep 'Reset cause'" and assure search comes
up empty.
Change-Id: I7f8419dd58f79816f8061d0da4a0d3984c814289
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27658
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable nocturne to wake from lid attach/detach events.
BUG=b:111803637
BRANCH=none
TEST="emerge-nocturne coreboot chromeos-bootimage", verify EC has
commit a5abbbb4eb9b15a72624dddbfd727d0b324c3f36, and verify nocturne
wakes from suspend on a lid attach/detach event.
Change-Id: I22b957d741426ca8b49d1819cf39c940f55198eb
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/27649
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some fields were only required during early stages of IPU3.
Remove some fields that aren't used for the current version of IPU3.
BUG:None
TEST=Launch camera app and check if it works properly.
Change-Id: I72bcba13cc353a1b16fedeb7543fbbac432fbf5d
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/27617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Compile the linux devicetree using dtc and add it to CBFS.
Change-Id: I8a98ed7b128f65a6e0109963dbabca91563a315c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Use precompiled BL31 from blobs repo.
There's no check for USE_BLOBS here as the included file is "free":
The BL31 is Open-Source and licensed under BSD.
Change-Id: I7e9eb429d11150d43aa070d1bd6a11ea71951ce3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The register X1 isn't used. Document it and remove it.
Change-Id: I9324ea9de24ba4baaef9dde890c443dd0f921ad9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/23792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
terminations
For unused pins, configure them as GPIO input and use the default
termination. For the pins where board has an external termination,
remove SOC's internal termintation.
BUG=b:110654510
TEST=On Bip, flashed image and verified that it boots to OS. Also
executed a few suspend resume cycles.
Change-Id: I343fed54ebc04199acecab257d7b8253d0a3d83b
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/27634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These two da7219_aad properties are optional:
- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
[<2800>, <2900>]
- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
When the Mic Bias Higher Voltage feature is not required, firmware should
just not provide the dlg,micbias-pulse-lvl and dlg,micbias-pulse-time
properties.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
BUG=b:111700809
TEST=On grunt:
No "Invalid micbias pulse level" in dmesg
Change-Id: Ie99a8962e78c68b3f6927d0de34168f265d4efa9
Reviewed-on: https://review.coreboot.org/27613
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Akshu Agrawal <akshu.agrawal@amd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix regression introduced in commit f18dc5c7
"Add TCPA logging functionality":
Introduced TCPA log got overwritten in acpi.c of x86/arch, due to
CBMEM name collision. Use a different cbmem name to have two independent
TCPA logs.
Change-Id: Iac63ac26989080a401aac2273265a263a3fdec56
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
* Implement TCPA log for tspi extend function.
* Hook tcpa_log_init into vboot tpm_setup function.
* Add TCPA log output for vboot GBB flags and HWID
Change-Id: I22b1aa8da1a95380c39715727615ce5ce4c9443f
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
* Add vbnv_cmos_failed function to SoC.
* Add VBOOT starts in romstage select.
Change-Id: I90a051e2b8d303c918bef976d0bb07aae0b1f5b3
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The newly added macros are used for cleaning up the RAM initializatiion code.
Change-Id: I3d3782ee1fa524cf69b63ccc7eb73e9a2ace84ec
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
* remove duplicate macro definitions
* add brackets to macros
Change-Id: I1f758203afdcb1b18f3c0d786698f9fbf2246e0e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
* Add 8M and 16M fmap configurations.
* Fix kconfig selects.
* Add vboot options and fixes
Change-Id: I49d97a9d324207e45520d43b814b03a20005122a
Signed-off-by: zaolin <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/25084
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, default GPP_D21(LTE3_BODY_SAR) output level is low, it means
LTE tx power is backoff mode as default.
We would set GPP_D21 to high to change LTE tx power to normal mode as
default.
BUG=None
BRANCH=poppy
TEST=Verified default LTE tx power mode is normal mode as default
Change-Id: I62e77196c2116924f437f61368f0ae7efd0e144c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27661
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the new setting for fan performance state.
BUG=b:111860513, b:11865138
TEST=Fan do not run below trip point
Change-Id: I894460b8b418217e2477608094c37018437cbb78
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
All of the other SPDs are padded with spaces to make them use the full
size of the serial number field. The hynix-H5AN8G6NCJR-VKC SPD was not,
and that seems to be causing problems with some tools.
BUG=b:111903749
TEST=Mosys correctly identifies memory on board using that SPD.
Change-Id: I0e831873acab2f6fc7d76e85647198d3b7af4b12
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/27676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
|
|
Change-Id: I22f1c7dbdaf42722115d9e5913d47aa2c9dc7e9a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I42d97d278c81ce2cfd0010830c2e0bacddd947d6
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If8b8fd123e0dd15a0fc9dfe178076f8541e29d56
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I8da01cd462225b633bf2043ab33b35aeddc8d55a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The rewrite simplifies the code and fixes the limit on the case of IO resources
with the length of 1 byte.
This patch is inspired by the comment of Nico Huber on
Ia99b785dcd9cf56fb236ad7ade54656851f88a5e
If the ones in the mask aren't a continuous block, now a warning message gets
printed.
Change-Id: I0089278f5adf65e8f084580bc5bc1eb2f77b87f7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Since the TPM software stack refactoring static
TPM ACPI code isn't needed anymore.
Change-Id: I36a99cbc420ecfa55aa5c89787151d482225adf2
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27715
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 74203de
"intel/sandybridge: Don't hardcode platform type"
changed the MRC layout.
Bump the version to prevent a boot error, if the cache isn't
cleared on flashing a new coreboot version.
Change-Id: Icd6f31bf0b30a42c66e18ab83d2434f9c3084211
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27712
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A variant might talk to the EC to get board id in order to identify the
right GPIO configuration. Thus it is important to ensure that the LPC IO
windows are configured before this. This change moves the call to
perform EC init before configuring bootblock GPIOs.
BUG=b:111933657
TEST=Verified that reading board id does not fail on phaser.
Change-Id: Ic23c6fd7597a314e0b6421be39ccc0b1dfb46567
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27671
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Enable support for all variants.
Change-Id: Ibdd43d8cff23d3fa1154e2b72aa6095682783fe5
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Icf9feaf6f74cfe33a817bb2f1ecd3d49aa5e9a43
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Fix comments
* Use defines instead of magic values
* Use new PMBASE API to modify registers
Change-Id: Idd2ded19e528427db29fa87d87481b91bae2b512
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Add Supabrck v1 variant
* Modify rotundu base board
Change-Id: Id20e9d4ed7ac071d25a69eee63c9ec544d2ad152
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Read and print the TCPA ACPI log.
Change-Id: Ie2253d86cfc675d45b0a728794cc784215401f4a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/26244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
* TCG spec only applies to BIOS or UEFI.
* Therefore implement coreboot TCPA compliant log
in CBMEM.
* Write CBMEM log into the coreboot table for CBMEM tool access
Change-Id: I0a52494f647d21e2587231af26ed13d62b3a72f5
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I2ced3f2bb9d1d150341a57ff333ca14c897c4fa3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ie973923b90eca0bfabd474fed85a6cc33fce7e19
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Add a function to return CPU platform ID bits
* Add a function to return platform type
** Platform id is 4 on Lenovo T430 (mobile)
** Platform id is 1 on HP8200 (desktop)
* Use introduced method to handle platform specific code
* Use enum for platform type
* Report platform ID
Change-Id: Ifbfc64c8cec98782d6efc987a4d4d5aeab1402ba
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Implement caching like it's done with pmbase.
Change-Id: I26d56a9ff1a8d6e64c164f36e23b846b8b459380
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27664
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix Micron MT40A512M16LY-075:E DRAM SPD CRC error in AGESA MemSPDChecking:
ERROR Event: 04011200 Data: 0, 0, 0, 0
BUG=b:111901461
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I85c82fd9294f9146fc23e649436cbcc337c4c961
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27657
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add internal graphics device 00.01.00 to the ACPI tables so that the
ACPI PCI option ROM save functions have a proper scope to save the
ROM to.
BUG=b:111697181
TEST=Check coreboot log doesn't have "PCI: 00:01.0: Missing ACPI scope"
and check _ROM method is added in the SSDT1.
Change-Id: I2c9ef8d9dff76805b1fcde2ccceef958a5b53b4f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Additional diagnostic information about the EC and the most recent
reasons why it has reset the AP are read out and logged via printk.
This may aid in debugging spurious hangs and/or resets on the AP by
providing traceability to the EC when it triggered the reset. Merely
knowing that the EC was also recently reset may provide valuable
intelligence. See also https://crrev.com/c/1139028.
Change-Id: Ie6abe645d5acefb570b9f6a3c4a4b60d5bcd63cd
Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org>
Reviewed-on: https://review.coreboot.org/27621
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update ec_commands.h to be a verbatim copy of upstream, except retain
the complete copyright notice found in coreboot's copy. Upstream refers
to a file not present in coreboot.
Change-Id: Ic3daa09ffd83c089b6874e0ea9aab8aa60016775
Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org>
Reviewed-on: https://review.coreboot.org/27620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I0f37f0c49fd58adafd8a508e806e0f30759a6963
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27287
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use new PMBASE API functions in common SMI handler.
Change-Id: I4c64233ecdb8c1e28b319d84149f34bc8f1e4b97
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add common functions to manipulate PMBASE IO window.
TODO:
* Use the new functions to manipulate register in PMBASE.
* Get rid of duplicated get_pmbase()
Change-Id: I3b454434ade560fb056b1fc0afe9541df93e14dd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27278
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for WWAN detection on SNB/IVB boards that have
schematics or are available for testing.
Tested on Lenovo T430.
Change-Id: Ie96b2593971d49703eb747ab19f512be890d9c12
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20984
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iefeb47bca3676a1f807b7a66b74a07491e351362
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch sets SPI flash related configs and inits SPI bus 1 to
support SPI NOR flash.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I1a18a456f41a7c7daec954e961c9fbee3650493d
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch implements SOC-specific code of mt8183 and link the common
code to support SPI bus.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Signed-off-by: mengqi.zhang <mengqi.zhang@mediatek.com>
Change-Id: I544e850299c74861313c2425721479fe5b91639e
Reviewed-on: https://review.coreboot.org/27498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Refactor SPI code which will be reused amon similar SOCs.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Elm
Change-Id: If5a6c554dc8361e729cf5c464325b97b2bfb7098
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Since we move mtk_mmu_init() from bootblock to decompressor, we don't
need to build mmu_opertations.c in bootblock and we don't need to
include <soc/mmu_operations.h> in bootblock.c.
BUG=b:80501386
TEST=manually flashed into kukui and boots into romstage.
Change-Id: I58f97ac1705e4dfde5e2d497d9bec33a1d8d17c2
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/27655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
