| Age | Commit message (Collapse) | Author |
|---|
|
AGESA FSP-M implementation is now not updating MTRRs out from
under the caller. As such, remove the save/restore of MTRRs
from the FSP-M call.
BUG=b:155426691
Change-Id: I14f3b18dd373ce17957ef3857920e1c4e2901bbe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The PSP does the memory training and setting up of MSRs for
TOP_MEM and TOM2. Set caching up for all the DRAM areas:
Enable WB caching for 1MiB->TOP_MEM, 4GiB->TOM2.
Enable WC caching fro 0->1MiB except 0xa0000->0xc0000.
BUG=b:155426691
Change-Id: I83916a220ea4016d4438dd4fb5be82dec5506f80
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This tells the PSP where in main memory to copy the vboot workbuf.
BUG=b:152576063
TEST=Build sharedmem destination into AMDFW, verify shared memory
gets placed at that location.
Signed-off-by: Martin Roth <martin@coreboot.org>
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Change-Id: Ie1e955e22632ca5cf146ac6eec0407091e81f519
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2148830
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Change-Id: Id324403afa6d5a5a65ce4709be31e7f16e038da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42044
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For the verstage-on-PSP implementation, we need 2 additional copies
of the AMD firmware tables at non-standard locations. These are
for RW-A & RW-B fmap regions. This change allows us to build the
AMD firmware tables into those regions.
BUG=b:148767300
TEST=boot with psp_verstage, verify boot location
Signed-off-by: Martin Roth <martin@coreboot.org>
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Change-Id: I2b591b50e9b179fdfaead46ff93722fa2a155e9c
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2144534
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Change-Id: I7f841db8617b953dc671a9c12576145f85263581
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Each PnP device now fits in a single 96-character line.
With BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: Ice65ce2504877c40962de7c26e01529d53d75c8e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Only Winbond parts seem to support making status register writes
volatile. So this flag should not be exposed in the generic interface.
Change-Id: Idadb65ffaff0dd7809b18c53086a466122b37c12
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41746
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per JEDEC spec, manufacturer part name should be set to
blank (0x20). This change updates gen_spd.go to set bytes 329-348 as
0x20 and regenerates SPDs for TGL and JSL.
Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The orientation, etc. -switch properties are supposed to use the
connector device (underneath the MUX device) that belongs to the port
number in question. This patch finds the CONx device and uses that
to pass to the acpigen API.
BUG=b:154620502
TEST=on Volteer, dump SSDT and verify the *-switch properties point to
\_SB.PCI0.PNC.MUX.CON0 and CON1
Change-Id: Ie65c2d750f3d9f83285e0e4cc9642110c804bbad
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
A function pci_dev_disable_bus_master() is created. This function
can be used to disable Thunderbolt PCIe root ports, bridges and
devices for Vt-d based security platform at end of boot service.
BUG=None
TEST=Verified PCIe device bus master enable bit is cleared.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie92a15bf2c66fdc311098acb81019d4fb7f68313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
All variants are overriding soc_common_config, so source it from
overridetree and remove entry from baseboard devicetree.
Only keeping chipset lockdown config in baseboard which will be
common across all the variants.
BUG=None
BRANCH=None
TEST=Checked code compilation and lockdown config is applied to all variants
Change-Id: I23714b721a6bb0bac785f046586790a98dc5b646
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Change-Id: I8a39e862176cd1c8a14424eb6d2bf7edabd36adb
Found-by: Silvio Cesare, https://twitter.com/silviocesare/status/1268784333029965824
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The prefix mainboard_ was used everywhere else.
Change-Id: Ie576fd47301aa484cb1396e0c6f7260b7698af4d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I13ed3b6e8608c37c1ebe51838e4052f89a638d83
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41947
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE
so their FADT preffered_pm_profile would change from PM_MOBILE without
the added overrides here.
Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When MRC cached data update is performed, messages are written to
event log, which is flash based. For system that does not have flash
based event log, the messages are lost.
Added corresponding BIOS_DEBUG messages.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I1ef4794151fea7213c8317ddc898b0e37da280b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41981
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
BUG=none
BRANCH=none
TEST="BUILD for Volteer"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib54b3f7da828ce8d232fcea0639077970638f610
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The definitions of GPIO_xx equal IOMUX_GPIO_xx shifted by two.
Change-Id: I0ee821c71c88bf535122a9526862a9d1e68bd755
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: Iaaa0cc0b486145517939f46943f2fee82053d98e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This eliminates the differences in the first part of the file.
Change-Id: Ifb7d57da08e02664a28819e65bc8e9697ed38c4c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42009
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Explain why the flash is no longer cached.
BUG=none
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibb18f363a215d665d53a722ed76896a75d1c5608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42108
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change allows treating the PMC as a 'hidden' PCI device on Jasper
Lake, so that the MMIO & I/O resources can be exposed as belonging to
this device, instead of the system agent and LPC/eSPI.
Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I9025ca3b6b438e5f9a790076fc84460342362fc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41919
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By vendor choice override fadt->preferred_pm_profile here.
Change-Id: I0453c0edc9aeb86cf4f5d912613b8fa8beb63ab4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41917
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iad7e7af802212d5445aed8bb08a55fd6c044d5bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41916
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While working on psp_verstage, I noticed that this file had a number of
unnecessary includes. Remove them.
BUG=b:158124527
TEST=Build & boot psp_verstage on trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I32188e2dda39ece9dc98d0344824d997a2e80303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Id305d9edecac9e9cd305301e9dc5af6678ef7528
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently, having libgfxinit try to enable VGA will result in a hang.
On the Asrock B85M Pro4, DDI E (VGA) was not being enabled in coreboot,
so it did not hang. However, this renders Linux's i915 driver unable to
use VGA at all. In absence of monitors with digital inputs, this is bad.
To work around this problem, mark DDI E as enabled, and comment out VGA
from gma-mainboard.ads for the time being. This allows one to use a VGA
monitor, even if it only works after Linux drivers have taken over.
Change-Id: Idd6a9e8515a1065ad3c6ddf136896fef9f0fa732
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
It is NOT supported. The board is not meant to be flashed externally.
Change-Id: If422810e84355cb94004e5ca2b95d239804699d2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
The ASL code is copied from the Purism Librem 13v3, and is not needed,
as the standard fixed power button is used. It was removed for the
Pursim devices in commit 2d977b2dcb (mb/purism: remove duplicate ACPI
power button).
Change-Id: I18155ea672e7309b367ad4170f2f00f0b3e557db
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is copied from the Purism Librem 13v3, and is not needed, as the
standard fixed power button is used. It was removed for the Pursim
devices in commit 2d977b2dcb (mb/purism: remove duplicate ACPI power
button).
Change-Id: I8fe19b8fbcc11d859a75b3dc6b9bcc42c80d13f1
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rafael Send <flyingfishfinger@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD AGESA Hudson boards.
No idea, if this is correct for the two laptops. The Lenovo G505s also
incorrectly defines two power buttons.
[ 0.911423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.911434] ACPI: Power Button [PWRB]
[ 0.911493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.912326] ACPI: Power Button [PWRF]
If the generic power button device is needed, the POWER_BUTTON flag
should be set in FADT.
The GPE ACPI code seems to originate from commit 806def8c (I missed the
svn add on r3787. These are the additional files., Add AMD dbm690t ACPI
support.), and was copied over.
Change-Id: I88950e15faf1b90ca6e688864bac40bf9779c32e
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD AGESA Hudson boards
(SOUTHBRIDGE_AMD_PI_AVALON).
The GPE ACPI code seems to originate from commit 806def8c (I missed the
svn add on r3787. These are the additional files., Add AMD dbm690t ACPI
support.), and was copied over.
Change-Id: Ibeec73c15f2282f7ab0be88f96693bcb551b3e45
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change adds device_operations for UART MMIO devices that provides
following operations:
1. uart_acpi_name: Returns ACPI name of UART device. Generation of
UART device node is not yet moved to SSDT, but will be done in
follow-up CLs.
2. scan_bus: Uses scan_static_bus to scan devices added under the UART
devices. This allows mainboard to add devices under the UART MMIO
device.
Change-Id: I18abbe88952e7006668657eb1d0c177e53e95850
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
According to the Wilco EC spec the BTSC bit of PWSR is always cleared
when PWSR is read so that battery status change events are only
triggered one time. Testing of the Wilco EC has verified this behavior.
This changes the way in which the battery status change bit is used from
checking the bit state against the previous value to always issuing a
battery event when the BTSC bit is set. The other bits in PWSR indicate
state directly and do not behave like the BTSC bit.
BUG=b:157113138
TEST=Deploy on Drallion and verify that battery events are generated
BRANCH=drallion, sarien
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I8fbf2ee1158ddd790b04a20b1eb27a6cce4f5c81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I3f08b9cc34582165785063580b3356135030f63e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
|
|
Change-Id: I5156eb97648927e5fe6e467abb8e3e055a231fec
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for RT 1308 audio amplifier in TGLRVP.
We are using the i2c generic driver here to generate
the SSDT file. Datasheet:ALC-1308-CG-version-08.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp successfully. In kernel console
use the "aplay -l" command to check soundcard is listed.
Change-Id: I41d205a3ab87db85baf49e9e8a582c226ba5832d
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
BUG=b:156564296
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This is a standard MSR. No reason for picasso to define its own.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idcfae356d35ff08ced4b7e5ccfc132a8492a6824
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42087
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't use amd_setup_mtrrs, bsp_topmem or bsp_topmem2 in picasso.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1941934975dfea4f189347811b003a33996c887a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1632d03a7a73de3e3d3a83bf447480b0513873e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41685
Reviewed-by: David Guckian
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I03c25ad5d9864406e1a021e39a5736ac72c8825a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38197
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Cr50 update in recovery mode, so that we can at least still
update the process for most cases (that an update is pending in recovery
mode is not impossible but should be unlikely in the field).
Leave manual recovery unaffected so at least that would still work even
if Cr50 wedges in a weird way that it thinks it has an update on every
boot or something.
Setting the recovery_reason to VB2_RECOVERY_TRAIN_AND_REBOOT allows the
update to be applied.
BUG=b:154071064
BRANCH=none
TEST=builds
Thanks to Julius Werner for the suggested fix.
Change-Id: Iba341a750cce8334da4dcf6353ca8cd1268d170f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Reference:
- TGL User Guide #613584 Rev 2.2
- TGL User Guide #605534 Rev 1.0
BRANCH=none
BUG=none
TEST=build and boot tglrvp
Change-Id: I5da80fd4ad321b1ded369c2b6c039b73fcb3773e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41516
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I779387fb0c9d3ad6e16d4ccfc39c38dfe6620345
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change adds memory parts used by variant wheelie to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
BUG=b:157862308
Change-Id: I53f6f5c832cd40068a6d4379ace849f6e8ad7a91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41990
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that dedede is moved to using the auto-generated SPDs, we no
longer need the .spd.hex files in spd/ folder. Hence, this change
drops the files.
Change-Id: I026b3c61a2a88a7cd2c9842a26eb336324853add
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41882
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change switches dedede and family to using auto-generated SPDs
obtained using gen_spd.go and gen_part_id.go.
Change-Id: I6fadae0abcfb6e50d3cc502098ace9b668667a51
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41881
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GENERIC_SPD_BIN assumes that the SPDs are all placed in mainboard and
have .spd.hex as the suffix. Disable GENERIC_SPD_BIN for dedede as it
already provides its own rules for SPD inclusion. In follow up
changes, GENERIC_SPD_BIN can be re-enabled by updating gen_spd.go tool
to use similar suffixes and allowing different paths to be provided
for SPD by mainboard.
Change-Id: If10144e0b2bd67884af69f60e5117e388a3ae5da
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42054
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by waddledoo and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Part: NT6AP256T32AV-J2
Waddledoo started assigning DRAM part IDs from 1. So, this change
fills in Nanya part as ID 0 (though it is currently unused).
Change-Id: I3879c4f3ad942eb349b52aad397333f576599bbd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by wheelie and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by waddledee and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte# Current New Explanation
4 0x15 0x16 This part has only 1 die. Hence,
density per die is 16Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
9 0x40 0x00 Unused by MRC.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xFF as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.
Part: NT6AP256T32AV-J2
Byte# Current New Explanation
4 0x14 0x15 This part has only 1 die. Hence,
density per die is 8Gb.
6 0x90 0x04 1 die in package and 2 channels per
die.
Manufacturer name bytes are set to 0.
Change-Id: I7a68a29ca3632e22f3960c9fc44acf3ce4f87c9c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds the following memory parts to LP4x global list and
generates SPDs using gen_spd.go for TGL and JSL:
1. MT53E512M32D2NP-046 WT:E
2. K4U6E3S4AA-MGCR
3. H9HCNNNCPMMLXR-NEE
4. K4UBE3D4AA-MGCR
BUG=b:157862308, b:157732528
Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that volteer is moved to using the auto-generated SPDs, we no
longer need the spd/ folder under each variant. Hence, this change
drops the spd/ folders and the SPD files within them.
BUG=b:156126658
Change-Id: Icb36adeb11fd68a84df5b225db32fb8d840a530f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41619
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change switches volteer and family to using auto-generated SPDs
obtained using gen_spd.go and gen_part_id.go.
BUG=b:147321551,b:155423877
Change-Id: I9ed48f0b51714b072a0459d0b70b5417a49db54f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by volteer and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Part: K4UBE3D4AA-MGCL
Byte# Current New Explanation
6 0xB5 0xB4 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
Part: H9HCNNNBKMMLXR-NEE
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: H9HCNNNFAMMLXR-NEE
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
6 0xF9 0xB8 This device has 4 logical dies
instead of 8. Also, signal loading is
not used by MRC.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS
22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value
should be 0x12,0x29,0x15.
24 0x8C 0x96 taa is .468ns * CAS-40 which results
in byte 24 being 0x96 as per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x04C0.
123 0x00 0xE2 Fine offset for taa. Expected value
is 0xE2 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G32D2NP-046 WT:A
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB5 0x94 This device has 2 logical dies. Also,
MRC does not use signal loading.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
12 0x0A 0x02 As per datasheet, this is 1rank and
16-bit wide channel. So, value should
be 0x02.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to
380ns in MTB units which is 0x0BE0.
31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to
190ns in MTB units which is 0x05F0.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by halvor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: H9HKNNNCRMBVAR-NEH
Byte# Current New Explanation
4 0x16 0x15 As per datasheet, density is 8Gb per
logical channel. So value should be 0x15.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels 2
dies. Hence, 0x94
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x0460.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G64D4SQ-046 WT:A
Byte# Current New Explanation
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels,
2 dies. Hence, 0x94.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by malefor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by ripto and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that
can be used with JSL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating
SPD binary to add to CBFS.
Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that can be
used with TGL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating SPD
binary to add to CBFS.
BUG=b:147321551,b:155239397
Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds a JSON file (`global_lp4x_mem_parts.json.txt`)
containing global list of LP4x memory parts to live along with the spd
tools since the part information is not really any SoC or mainboard
dependent and comes directly from the part datasheet. It can be shared
by mainboards based on different platforms supported by the tools.
BUG=b:155239397,b:147321551
Change-Id: I9e2f98fc9c1c8a7f73c9a1bfab22c996de222a32
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41874
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Serial Presence Detect (SPD) data for memory modules is used by Memory
Reference Code (MRC) for training the memory. This SPD data is
typically obtained from part vendors but has to be massaged to format
it correctly as per JEDEC and MRC expectations. There have been
numerous times in the past where the SPD data used is not always
correct.
In order to reduce the manual effort of creating SPDs and generating
DRAM IDs, this change adds tools for generating SPD files for LPDDR4x
memory used in memory down configurations on Intel Tiger Lake (TGL)
and Jasper Lake (JSL) based platforms. These tools generate SPDs
following JESD209-4C specification and Intel recommendations (doc
Two tools are provided:
* gen_spd.go: Generates de-duplicated SPD files using a global memory
part list provided by the mainboard in JSON format. Additionally,
generates a SPD manifest file (in CSV format) with information about
what memory part from the global list uses which of the generated
SPD files.
* gen_part_id.go: Allocates DRAM strap IDs for different LPDDR4x
memory parts used by the board. Takes as input list of memory parts
used by the board (with one memory part on each line) and the SPD
manifest file generated by gen_spd.go. Generates Makefile.inc for
integrating the generated SPD files in the coreboot build.
BUG=b:155239397,b:147321551
Change-Id: Ia9b64d1d48371ccea1c01630a33a245d90f45214
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove unused includes
Change-Id: I7e8109870168db7f477f205a0b3020b7b2be5f5f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41541
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a logic bug in how timeouts are reported back. In the
timeout case, the original code would return -1 instead of 0. All call
sites expect a return value of 0 as the timeout indicator.
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: I81a888aa0a1544e55e6a680be8f3b7f6e0d87812
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Advertising SMI triggers in FADT is only valid if we exit with
SMI installed. There has been some experiments to delay SMM
installation to OS, yet there are new platforms that allow some
configuration access only to be done inside SMM.
Splitting static HAVE_SMI_HANDLER variable helps to manage cases
where SMM might be both installed and cleared prior to entering
payload.
Change-Id: Iad92c4a180524e15199633693446a087787ad3a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Ifb4f99c11a72e75ec20b9faaf62aed5546de91fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If running on older (like before 2.4.0) version of QEMU there is
no SMI support, so never advertise SMI in FADT for the emulation.
Behaviour if ACPI daemon tries to raise SMI under these conditions
is unknown.
Change-Id: I170058793798648c6713de1530d89ec2ac53e39a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Ia61e50fb49719e9e18e81a27f355cdbd755a3f40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41906
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Iefa1e7d80367dbe380f69e768238b4124a45626f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for the Prodrive Hermes mainboard.
Tested with CoffeeLakeFspBinPkg FSP 7.0.68.41.
Untested:
* CNVi
* Intel Graphics
Tested:
* CPU Intel Xeon E2288G
* CPU Intel Core i3-9100F
* CPU Intel Core i7 9700KF
* CPU Intel Core i7 9700E
* CPU Intel Core i7 9700F
* CPU Intel Core i5 9600K
* CPU Intel Pentium Gold G5400
* PCIe Link Width x8 on Slot6 by changing PCIe mux
* All four DDR4 slots in different configurations
* USB2.0 HDR1
* USB2.0 HDR2
* USB3.0 HDR
* Slot1
* Slot2
* Slot3
* Slot4
* Slot6
* M2.M NVMEe
* Ethernet PHYs 0-4
* Aspeed BMC PCIe
* Aspeed BMC USB
* Aspeed Graphics init
* USB3 backplane all working
* I801 SMBUS
Not Working:
* Intel HDA
Change-Id: Id7d051d3fa6823618691d5572087c9ae589c2862
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Set up cpus:
* setup apic IDs.
* setup MSR to enable fast string, speed step, etc.
* Enable turbo
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I5765e98151f6ceebaabccc06db63d5911caf7ce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This adds a hook so that a payload can optionally perform USB service
functions in conjunction with regular USB port status polling. In
particular, this allows depthcharge to control the state of an
external USB mux. Some SoCs like Tiger Lake have a USB mux for Type-C
ports that must be kept in sync with the state of the port as reported
by the TCPC. This can be achieved by hooking into the poll routine to
refresh the state of the USB mux.
BUG=b:149883933
TEST=booted into recovery from Type-C flash drive on volteer
Change-Id: Ic6c23756f64b891b3c5683cd650c605b8630b0fb
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
CB:41384 (SHA dbcf7b16219df0c04401b8fcd6a780174a7df305) added some new
functionality to devicetree files ("hidden PCI devices"). It's a decent
enough semantic change that it should be added to the release notes for
the 4.13 release.
Change-Id: I52969f63dbc492afd32279176cbcfc2b76d7ac33
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We decided to store the FSG on eMMC instead of SPI flash, so we don't
need this region anymore. Getting rid of it allows us to put more space
into CBFS (to store hi-res bitmaps). Also grow VPD by some remaining
amount to keep the FMAP alignment reasonable.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If73450b65718affae71b6ada70ded5c5f45cfb4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function set_mmio_dev_ops() in chip.c which
is used for setting the dev->ops for MMIO devices based on the
comparison of MMIO address in device tree to the pre-defined base
addresses in iomap.h.
Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of
i2c_acpi_name is restricted to i2c.c since it is not required to be
exposed out of that file.
Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Drop functions that are not being used.
Change-Id: If406601f3bb7a98a621c1339b2f3413a43b8cc9f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit fddd101904188193197be10c8eae04e76386299b.
Reason for revert: With FSP compression and non serial FSP we now have enough space in RO.
Original change's description:
> mb/google/zork: Increase RO section to 5MB
>
> The current size is too small to fit all the depthcharge assets.
> Increasing it to 5MB gives us 648k of free space.
>
> $ cbfstool /build/zork/firmware/image-trembyle.serial.bin print -r COREBOOT
> FMAP REGION: COREBOOT
> Name Offset Type Size Comp
> cbfs master header 0x0 cbfs header 32 none
> fallback/romstage 0x80 stage 524316 none
> fallback/ramstage 0x80100 stage 96592 none
> config 0x97ac0 raw 843 none
> revision 0x97e80 raw 680 none
> spd.bin 0x98180 spd 8192 none
> etc/sdcard0 0x9a1c0 raw 8 none
> locales 0x9a200 raw 141 LZMA (166 decompressed)
> (empty) 0x9a300 null 3224 none
> fspm.bin 0x9afc0 fsp 720896 none
> (empty) 0x14b000 null 3992 none
> fsps.bin 0x14bfc0 fsp 327680 none
> pci1002,15d8,c1.rom 0x19c000 optionrom 54272 none
> pci1002,15d8,c4.rom 0x1a9480 optionrom 54272 none
> fallback/dsdt.aml 0x1b6900 raw 12727 none
> locale_hi.bin 0x1b9b00 raw 10441 LZMA (239928 decompressed)
> ...
> locale_ko.bin 0x254f80 raw 11282 LZMA (231168 decompressed)
> fallback/payload 0x257c00 simple elf 95169 none
> (empty) 0x26f000 null 245656 none
> apu/amdfw 0x2aafc0 raw 1277440 none
> (empty) 0x3e2e00 null 688472 none
> bootblock 0x48af80 bootblock 64 none
>
> BUG=b:130028876
> BRANCH=none
> TEST=Built image with depthcharge and booted.
>
> Change-Id: I9cd2902404ef68cdbd4a9484d5cb1ee9cba3efd1
> Signed-off-by: Raul E Rangel <rrangel@chromium.org>
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2042850
> Reviewed-by: Martin Roth <martinroth@google.com>
BUG=b:130028876, b:150746858
BRANCH=none
TEST=emerge-zork coreboot-zork chromeos-bootimage and boot trembyle
localhost ~ # flashrom -p host -r /tmp/main.bin
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
Calibrating delay loop... OK.
coreboot table found at 0xcbe54000.
Reading flash... SUCCESS
localhost ~ # futility dump_fmap /tmp/main.bin | grep WP_RO -B 3
area: 22
area_offset: 0x00c00000
area_size: 0x00400000 (4194304)
area_name: WP_RO
localhost ~ # flashrom -p host --wp-range 0xc00000 0x400000 --wp-enable
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
coreboot table found at 0xcbe54000.
SUCCESS
localhost ~ # flashrom -p host --wp-status
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
coreboot table found at 0xcbe54000.
WP: status: 0x0094
WP: status.srp0: 1
WP: status.srp1: 0
WP: write protect is enabled.
WP: write protect range: start=0x00c00000, len=0x00400000
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5df10ee8e855adfaaf4b2fac4c2c47037ec093b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This driver generates an ACPI device object for a UART attached device
with all of the expected device support handlers like different interrupt
sources and power control GPIOs.
Example use:
chip drivers/uart/acpi
register "name" = ""UDEV""
register "desc" = ""UART Attached Device""
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "compat_string" = ""google,cros-ec-uart""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_C20)"
register "uart" = "ACPI_UART_RAW_DEVICE(115200, 64)"
device generic 0 on end
end
Resulting in this ACPI device:
Device (UDEV)
{
Name (_HID, "PRP0001")
Name (_UID, Zero)
Name (_DDN, "UART Attached Device")
Method (_STA, 0, NotSerialized)
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate ()
{
UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.PCI0.UAR2",
0x00, ResourceConsumer, , Exclusive)
GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer)
{
0x0114
}
})
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x01)
{
Package (0x02)
{
"compatible",
"google,cros-ec-uart"
}
}
})
}
Change-Id: Idfd2d9d2ab6990a82ddd401734c0d9b1b0b8f82d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change adds support for generating the device descriptor that
corresponds to the UARTSerialBusV2() ACPI macro.
The resulting ACPI code for ACPI_UART_RAW_DEVICE(115200, 64) is:
UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.PCI0.UAR2",
0x00, ResourceConsumer, , Exclusive)
Change-Id: I671ce2a499d74717d8677528c46ab3fbc1d7faf5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There have been changes to the way device properties are supported
in Linux[1] and Windows[2] which add flexibilty:
- non-standard UUIDs can be used instead of only ACPI_DP_UUID
- support for multiple different packages within the _DSD that
associate different properties with unique UUIDs.
To handle this I extracted the part that does the write of UUID and
properties to a separate function and defined a new PACKAGE type
which has the custom UUID as a name and can be used the same way that
child properties are today.
For example a PCIe root port for a USB4 port has a standard property
indicating the USB4 reference, and then two custom properties which
are defined for different attributes.
Example code:
/* Create property table */
acpi_dp *dsd = acpi_dp_new_table("_DSD");
acpi_dp_add_reference(dsd, "usb4-port", usb4_path);
/* Add package for hotplug */
acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4");
acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1);
acpi_dp_add_package(dsd, pkg);
/* Add package for external port info */
pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389");
acpi_dp_add_integer(pkg, "ExternalFacingPort", 1);
acpi_dp_add_package(dsd, pkg);
/* Write all properties */
acpi_dp_write(dsd);
Resulting ACPI:
Scope (\_SB.PCI0.TRP0)
{
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package ()
{
Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA }
},
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package ()
{
Package () { "HotPlugSupportInD3", One }
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package ()
{
Package () { "ExternalFacingPort", One },
}
})
}
[1] https://patchwork.kernel.org/patch/10599675/
[2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Create the voxel variant of the volteer reference board
BUG=b:157879197
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_VOXEL
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I8ba5412be211730db84675927c500238cb20ff3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We previously confirmed [1] that bootblock will grow beyond current
8KiB size if console is enabled. Automatically change to 16KiB if user
enabled it in menuconfig.
[1] https://review.coreboot.org/c/coreboot/+/36775
Change-Id: Ic9988c77cf9677167a382aa4dc7dcfa2bc4cbe02
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41460
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:157499341
BRANCH=NONE
TEST=FW_NAME="vilboz" emerge-zork coreboot
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I28ab3edb130fc7bf8b786141bc088166052d4868
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41801
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If AMD_PUBKEY_FILE contains an absolute path the resulting path is
incorrect since it contains $(top).
BUG=b:147042464
TEST=Build trembyle with absolute and relative path.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib46b1799fad5588a18411f8c32541192d699cdd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add template directory for the Puff reference board.
BUG=b:157701044
BRANCH=None
TEST=N/A
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: Ic81c663b92eeb1d39c2b425d331eb16812f58b7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Add PCIe enumeration and resource assignment/allocation.
Xeon-SP processor family has split IIO design, where PCIe domain 0 is
split into multiple stacks. Each stack has its own resource ranges (eg.
IO resource, mem32 resource, mem64 resource). The stack itself is not
PCIe device, it does not have config space to be probed/programmed.
The stack is programmed by FSP. coreboot needs to take into account of
stack when doing PCIe enumeration and resource allocation.
Current coreboot PCIe resource allocator does not support the concept of
split IIO stack, thus entire support is done locally in this patch.
In near future, improvements will be done, first generalize for xeon-sp,
then generalize for coreboot PCIe device code.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: If461b1dc1f313d98b676dc9e91d08a1dbb9cb388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
offsets for ACPI_PM are incorrectly configured for picasso SoC.
Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for
trying to testing it on wrong address.
Fix them to correct offset with hack for GPE0_BLK.
BUG=b:147044624
TEST=build and boot on trembyle; PM Timer error is gone
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=chromium:1088209
TEST=emerge coreboot-utils (with patches to the ebuild) works
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I25d237d048e417f4e412583031905ecf3614c431
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The default HID was removed by a1c82c5ebee. We need to explicitly
specify it.
BUG=b:154756391
TEST=No longer see ERROR: _HID required message in console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0083f98aea55ba262ac44b0018c9c1d2e12d9f8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If the device is missing the HID, the code would previously leave an
open scope and device on the stack.
BUG=b:154756391
TEST=Verify stack ACPI stack does not exceed limit on Trembyle.
Fixes: a1c82c5ebee ("drivers/generic/max98357a: Allow custom _HID from config")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I798ed08ef0a0575def12937a66a7ce99f743e60d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ia4508a9a087e3996ef7667280f8e2788421e5700
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I263c159fe4b7757dd5abfc0d6248e45b749df980
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These devices never show on the PCI domain.
Change-Id: I2d4d99c1e96c15dacb950aeb85b3e9a5d127c791
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icebf0eea4e1fee6d15ba3f1a080cbc40b42fd733
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6a066659758aeb0251d9b37f525ad987b90832db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41787
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
hostbridge.asl
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: Ib0ffd9a332fa9590de63f8828d30daa710fe50db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change updates hostbridge.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for google/link.
Change-Id: I5345ee22df7da92ee48c718f5bd748d7ea6155f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
