summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-06mainboard/google/poppy/variants/rammus: Enable GSPI clock for bus 0.kane_chen
On rammus, system halt was observed because of gspi clk value being set to 0. Log info from serial coreboot: FMAP: area RW_NVRAM found @ 9fa000 (24576 bytes) SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000 VBNV: Restore from flash failed ASSERTION ERROR: file 'src/soc/intel/common/block/gspi/gspi.c', line 443 gspi.c 442 443 assert(gspi_clk_mhz != 0); 444 assert(ref_clk_mhz != 0); 445 return (DIV_ROUND_UP(ref_clk_mhz, gspi_clk_mhz) - 1) & SSCR0_SCR_MASK; BUG=none BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: Ibe3937902901b2cdc1a196415c08fabb0f3155f2 Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28405 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-06soc/intel/cannonlake: Fix Coverity Scan reportLijian Zhao
Fix uninitialized variable OnModuleSpd, init bool with false first. BUG=CID 1395330, 1395331 TEST=N/A Change-Id: I050287370f7321ff9905937304bb3cc7f20d8c6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-06mediatek: Refactor memory test code among similar SoCsTristan Shieh
Refactor memory test code which will be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I800aa9a73f0b4588f46a98c964e2794bdf04f09d Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-06mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0Sathyanarayana Nujella
DMIC's are now connected to DMIC_CLK0/DMIC_DATA0. So, enable the pins accordingly. BUG=b:113744731,b:111106010 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage' builds the image Change-Id: I48cace3c6099a2853fcb377c695a5e325094baf6 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/28433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06soc/intel/common: Add function to set BILD bit in RTCRizwan Qureshi
Add a function to set the Bios Interface Lock Down bit (bit 31) in RTC Configuration register (0x3400). This bit when set prevents the top swap enable bit (bit 0) in the RTC BUC register (0x3414) from being changed. Change-Id: Iacaeeb0d6cabcf0c2c46a58948457ab832351476 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-06acpi/gnvs: delay setting chromeos_apci_t.vdat until depthchargeJoel Kitching
Standardize on using vboot_handoff data structure for transferring data between coreboot and depthcharge. chromeos_acpi_t.vdat is undefined until set in depthcharge. BUG=b:112288216 TEST=compile and run on eve CQ-DEPEND=CL:1198814 Change-Id: Iccc021334d3c6f0145dffd5ca05beb9e430378a9 Signed-off-by: Joel Kitching <kitching@gmail.com> Reviewed-on: https://review.coreboot.org/28407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06chromeos/gnvs: remove function and naming cleanupJoel Kitching
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190) - Make function naming in gnvs.h consistent (start with "chromeos_") BUG=b:112288216 TEST=compile and run on eve Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06x86/acpi: Add APEI definitionsMarshall Dawson
Add ACPI Platform Error Interfaces definitions that will be used for building a BERT table region in a subsequent patch. Two tables are defined: the Generic Error Status Block, Generic Error Data Entry. For reference, see the ACPI specification 6.2-A tables 381 and 382. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: Ib9f4e506080285a7c3de6a223632c6f70933e66c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-06src/include: Add CPER definitionsMarshall Dawson
Add definitions from the UEFI appendix on Common Platform Error Record (appx. N in revision 2.7-A). The structures and fields defined are the minimum required for generating ACPI Boot Error Record data in a subsequent patch. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: I74d8ec8311de749e891827747b84dce0e737aceb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-06src/include: Introduce guid_t typeMarshall Dawson
Duplicate the guid_t and GUID_INIT framework from the Linux driver. Adapt it for coreboot, and create supporting copy and compare functions. Change-Id: Ia1cd7a1f0e0f900858830e1a6a7e2bbbe272fa30 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-06mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mVSeunghwan Kim
Nautilus-Wifi with m3 AP got a halt issue during CTS test. Nautilus-Wifi was FCS with Celeron AP first and also its PCB/BOM was validated only with Celeron. Since Celeron deos not support turbo boost mode, its steady power demend and lower CPU frequency may not reflect the potential noise hidden inside the board. Bumping VCC_SA voltage offset 75mV confirmed works to mitigate the potential noise coupling to VCC_GT/SA, and we verified this change makes this issue go away on Nautilus-Wifi board. Nautilus-LTE doesn't show this issue, since it has 10L PCB, will have better grounding and less noise/ripple than 8L PCB. BUG=b:111417632 BRANCH=poppy TEST=Verified CTS test pass without an issue. Change-Id: Id13fcc36a5b6ed42620c66f57a7303f30bff1a50 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06intel/fsp2_0: Add fsp2.1 shared stack feature supportAamir Bohra
FSP 2.1 implementation is adding features on top of fsp2_0. One such feature is a shared stack implementation that requires coreboot to allocate stack for fspm and then fsp uses the same stack as coreboot. This implementation adds support for shared stack feature. Change-Id: I6581111dbaddfa403eca14100577ccc8a05c4ec7 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/28358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06mb/google/octopus: Enable TBMC deviceAmanda Huang
This change enables tablet mode ACPI device for all octopus boards. BUG=b:113348027 Change-Id: I69a5dd41cd0958b93f8eed338fed4b6ee77a178f Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-05mainboard/google/kahlee: Enable the BCLK bufferMartin Roth
Set GPIO135 high to enable audio through the BCLK buffer. BUG=b:113559558 TEST=None BRANCH=grunt Change-Id: I1dcecf5960d3c91e0c2165e7f8856ff423c06e8c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28482 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-05nb/intel/x4x/gma.c: fix skipping of native graphics initStefan Tauner
CB:27984 (e6c8f7e) is supposed to skip over NGI if bit #1 in register GCC is set. However the check for x4x was wrongly checking if any bit of the whole register is set. Change-Id: I5000f5e771abb98f046e2ad19c1bee7dbc0743fc Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-05arch/x86/Makefile: include dependencies for romcc bootblockNico Huber
We already explicitly generated a dependencies file for the romcc bootblock. Though, as it has its own rule and isn't registered to any of our object-file classes, the dependencies file wasn't included automatically. Change-Id: I441cf229312dff82f377dcb594939fb85c441eed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/28442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-05mb/intel/dg43gt/dsdt.asl: fix globalnvs.asl include pathStefan Tauner
Use ICH10's file instead of ICH7's. Change-Id: I02678179e8f1dbd9b9f7d6407383a7a6cad15011 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-09-05riscv: add entry assembly file for RAMSTAGEXiang Wang
RAMSTAGE will revoke CAR/scratchpad, so stack and exception handling needs to be moved to ddr memory. So add a assembly file to do this. Change-Id: I58aa6ff911f385180bad6e026d3c3eace846e37d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-05mb/lenovo: Support dual graphics for xx20/xx30 ThinkPadsEvgeny Zinoviev
Add CMOS option that allows to use both integrated and discrete GPU. Tested on ThinkPad W530. Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-05riscv: add support to check machine length at runtimeXiang Wang
Highest two bits of misa can be used to check machine length. Add code to support this. Change-Id: I3bab301d38ea8aabf2c70437e179287814298b25 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-04util/lint: update whitespace checking rulesMartin Roth
- Check payloads, the root Makefiles and toolchain.inc - 3rdparty is already not checked, so remove - The marks around COPYING, LICENSE, and README were not needed - Skip checking .ico files Change-Id: Ic4a1709224604b36362d82e249c2916fca0336a2 Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/28431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-04payloads: Remove/fix trailing whitespaceMartin Roth
Change-Id: Idfc54ca0ed53f52ddad61114ec6b05d94dd746c1 Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/28430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-04util/lint: Update whitespace linter for FreeBSDMartin Roth
On FreeBSD, this test was failing with the error: "grep: Argument list too long" I found that changing this to other forms takes MUCH longer, so I left the original method mostly unchanged except for moving the include & exclude lists into variables. Currently, I'm setting all non-linux operating systems to use the second version. I'll update that if I find other that other OSes support the first. Change-Id: I1c9281440d051dea8a8b3a3ddc04676ccea77c7a Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/28429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-04mb/google/poppy/variants/rammus: add sku info into smbios tableZhuohao Lee
This patch adds the mainboard.c in order to support the sku id in smbios table where the sku id is queried from the eeprom via EC. BUG=b:113714761 BRANCH=master TEST=check the result of 'dmidecode' Change-Id: I3413784cca1ac10a2468d84f2d06c0e1d701fdcb Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-04payloads/LinuxBoot: Fix remaining issuesPhilipp Deppenwiese
* Update kernel versions * Fix initrd path handling Change-Id: Ia0641fd0c0db1e47ee4829b73871af662d4a6370 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-09-04riscv: add spin lock supportXiang Wang
Add spin lock support for riscv. Change-Id: I7e93fb8b35c4452f0fe3f7f4bcc6f7aa4e042451 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-04riscv: Add DEFINE_MPRV_READ_MXR to read execution-only pageXiang Wang
Must to set MXR, when needs to read the page which is execution-only. So make this change. Change-Id: I19519782fe791982a8fbd48ef33b5a92a3c48bfc Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-02drivers/intel/fsp1_1: Fix typoWim
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Change-Id: I9c6b063970fa328650de3f4402fe203305b5b760 Reviewed-on: https://review.coreboot.org/28373 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wim Vervoorn Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02riscv: separately define stack locations at different stagesXiang Wang
BOOTBLOCK/ROMSTAGE run in CAR/scratchpad. When RAMSTAGE begins execution will enable cache, then CAR will disappear. So the Stack will be separated. Change-Id: I37a0c1928052cabf61ba5c25b440363b75726782 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-02mb/lenovo: dGPU power handling on T430, T530Evgeny Zinoviev
Enable dGPU power handling on Lenovo ThinkPad T430, T530 via PMH7 register 0x50. Although there's no Thinker-1 chip on these models according to schematics, dGPU power control via PMH7 works the same as on T420/T520, so they can be considered Thinker-1-compatible. It can be tested from linux userspace using util/pmh7tool. To turn dGPU power off: pmh7tool -c 0x50 7 pmh7tool -c 0x50 3 To turn it on: pmh7tool -s 0x50 3 pmh7tool -s 0x50 7 To check whether it is on (bash): reg=0x$(pmh7tool -r 0x50) echo "$(( (( reg & 0x08 )) >> 3 ))" or just `pmh7tool -b 0x50 3` with https://review.coreboot.org/#/c/coreboot/+/28388/ Tested on ThinkPad W530. Change-Id: Ieab1a33b3c680c757cc0999660b5cb7e122474cc Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28392 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02util/crossgcc: Add GCC 8.1 patch for missing backslashMartin Roth
When building the toolchain under BSDs, this missing backslash is needed. Change-Id: I40b0adaa73b241713493fd74f24c93f85e7aabbe Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/28362 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02src/drivers/spi/tpm: Fix typo & capitalize TPM and IRQElyes HAOUAS
Change-Id: Ifb1e024821153865dd4a27a100f8a9c61151e0e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-09-02mb/google/poppy/Kconfig: Fix missing device node /dev/tpm0 for H1Zhuohao Lee
This patch adds the DRIVERS_SPI_ACPI to enable the tpm device node. Without DRIVERS_SPI_ACPI, the kernel will popped out the below error: cr50-update[592]: Starting cr50 update cr50_get_name[595]: updater is /usr/sbin/gsctool -s cr50-update[609]: exit status: 3 cr50-update[613]: output: Could not open TPM: No such file or directory cr50_get_name[615]: board_id: '' board_flags: '0x', extension: 'prod' cr50-update[617]: hashing /opt/google/cr50/firmware/cr50.bin.prod cr50-update[678]: current state 3 in /var/cache/cr50.a3055efbc9.state cr50-update[682]: not running cr50-result[782]: Not running normal image. Skip setting Board ID trunksd[795]: TPM: Error opening tpm0 file descriptor at /dev/tpm0: No such file or directory BUG=none BRANCH=master TEST=/dev/tpm0 is created Change-Id: I35287c6c54299c2677c41fc830675570b9d45a94 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-02chromeec: PS2K node can't be under SIO nodeStefan Reinauer
Some operating systems won't find the keyboard if it is under the SIO node. BRANCH=none BUG=none TEST=Boot Windows, observe that keyboard is working Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> Original-Change-Id: I76b1ca9bf9243ffa861bed9c356a45377e7f43ef Original-Reviewed-on: https://chromium-review.googlesource.com/895364 Change-Id: If99e15bef2173c44cecaa8fdeaa69381bd0e499a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-02build system: Add automatic downloading of FSP mirror repo if requestedPatrick Georgi
It only happens if both USE_BLOBS and MAINBOARD_USES_FSP2_0 are enabled. Change-Id: I46843c61d3ddf398a3c058bb571d285b596bf5c1 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/28304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-09-02submodules: add FSP mirror as non-default submodulePatrick Georgi
Like the 3rdparty/blobs repo this isn't checked out by default. Right now you can manually check it out using $ git submodule init --checkout A follow up commit will add some automagic if USE_BLOBS and MAINBOARD_USES_FSP2_0 are enabled. Change-Id: Ie612495abc2a2d5947225e6ab54872aa72d4bec6 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/28303 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-02mainboard/google/kahlee/var/liara: Enable Synaptics touchpad deviceCrystal Lin
Enable Synaptics touchpad device for liara BUG=b:113309346 BRANCH=master TEST=Verify touchpad on liara works with this change Change-Id: Icdafe34a00fd55d5338fa07ffa304e48e7b85e7b Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-31google/cheza: Adjust FMAP to fit new requirementsJulius Werner
This patch overhauls the Cheza FMAP, removing some sections we don't seem to need (RW_CDT, the two RW_XBL_BUFFERs, and the second copy of RW_DDR_TRAINING), and adding new sections we're going to need soon or should have had anyway (RO_DDR_TRAINING, RO_FSG, RW_LEGACY). Make more use of implicit offsets and sizes, because we can and because it should make future adjustments easier. Change-Id: I0bd9e59e9cfa162c478c4bd1f048fcac61ad5062 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: T Michael Turney <mturney@codeaurora.org>
2018-08-31util/pmh7tool: Add option to read specific bitEvgeny Zinoviev
Change-Id: I045383eedbcf438270e9c64329a8d910bb941ab8 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-31mb/google/kahlee/variants/liara: Update Audio/H1/TP i2c timingsChris Zhou
After adjustment on Liara Proto Audio: 399.2 KHz H1: 398.3 KHz TP: 399.0 KHz BUG=b:113319200 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage measure by scope Change-Id: Ibba8c823ed8451a804cf731d49e7568a94ac7c6b Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-08-31siemens/mc_apl1: Correct the Tx signal from SATA interfaceMario Scheithauer
Because of an incorrect transmit voltage swing, the signal must be adjusted. The factor of slices for full swing level can be corrected via the High Speed I/O Transmit Control Register 3. Change-Id: I116802cd2a944658fc3022e948eba43cebe52bb4 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2018-08-30mb/google/poppy/variants/nautilus: Set grip sensor thresholdSeunghwan Kim
Set threshold parameter for grip sensor STH9321 .ProxCtrl6: 75 .ProxCtrl7: 99 BUG=b:113303916 BRANCH=poppy TEST=Built and verified parameter passed to driver Change-Id: I8a410a23b5e3831fc8e90118b810fc2409a026eb Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Enrico Granata <egranata@chromium.org>
2018-08-30soc/intel/cannonlake: Fix comment errors for SMBUSLijian Zhao
On CannonLake PCH, SMBUS stays at Bus 0 Device 31 and Function 4, previous comment in southbridge.asl mention it as Function 3 that was a mistake. BUG=N/A TEST=N/A Change-Id: I29786457379809b6fcb592e1136ff612539e24dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-30riscv: update the definition of intptr_t/uintptr_tXiang Wang
These RISC-V ABIs defined by GCC : ilp32 ilp32d ilp32f lp64 lp64d lp64f. Through this we know that the length of the long's bit is equal to pointer. So update this code. This's more flexible. Change-Id: I16e1a2c12c6034df75dc360b65acb1b6affec49b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27768 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-30util/abuild: Use env to find bashMartin Roth
FreeBSD doesn't have bash in /bin, so use env to find it. This is already done in many other scripts that are used in the actual build path. Change-Id: If6fb6bc3c55835e2144599fea1cdb2f7abefb0fc Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/28364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2018-08-30soc/amd/stoneyridge/enable_usbdebug.c: Update pci_ehci_dbg_set_port()Richard Spiegel
Function pci_ehci_dbg_set_port() used NDA register DEBUGPORT_MISC_CONTROL, which was deprecated in favor of a public PCI register (though only the bits to enable debug port became public) 0x90. Therefore code needs to be updated. BUG=b:69231009 TEST=Build and boot grunt. Change-Id: Ibb25992729d984b8570712f91a03a7cd1e9b8643 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-30Documentation/nb/intel/sandybridge/nri_registers.md: Fix mistakeAngel Pons
According to a comment on fa1a07b, the 100MHz clock is the Ivy Bridge only clock, not the 133MHz one. Change-Id: I28fed4a9264b96f93b9e88325f547a5db512514c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28377 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
Also removed internal pull ups for CX_PREQ_L and CX_PREQ_L signals as they have external pull ups. BUG=b:110654510 TEST=On Yorp Proto 2, flashed image and verified that it boots to OS. Checked Wake-on-Wifi works with both cnvi and pcie modules. Also executed a few suspend resume cycles. Change-Id: I0a76cd2a1481c828fc092aaf7e870a411624879c Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/28328 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-30soc/intel/cannonlake: Update PMC base address for CNP H and LPMaulik V Vaghela
PMC base address is different for CNP LP pch and CNP H pch. Added logic to determine PMC base addrress dynamically based on PCH ID. BUG=none BRANCH=none TEST=Boot Coffeelake U RVP board and check if PMC base address is determined correctly. Change-Id: I833395260e8fb631823bd03192a092df323250fa Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27523 Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-30drivers/intel/gma: Fix OpRegion Mailbox3 backlight changeNico Huber
We should always update BCLP, no matter if the driver is ready yet to process the request. This way it will hold the current value when the driver initializes. Change-Id: I4b091d744f95da39abe542966f0a8589a187573b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-30drivers/intel/gma: store uint8_t brightness values in mailbox3Alexander Couzens
The _BCM function requires a percentage value. While the brightness in mailbox3 requires a value in uint8_t. Meaning 255 = 100%. Previous implementation stored the percentage brightness value resulting in limiting the brightness to ~40% of it's maximum power. Only affects brightness control using mailbox3. Fixes: 6838aaebf9ec ("drvs/intel/gma/acpi: Add methods to use MBOX3") Change-Id: I290b5f5b2a8ee406e39e86d3e0de9997798d890d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/28345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-29mainboard/google/kahlee: Enable EC firmware update screenMartin Roth
Grunt takes a few seconds to update the EC, so display a notification screen while that's happening. BUG=b:113286040 TEST=Boot Grunt with old EC firmware, see update screen Change-Id: I95fc4d3430bac66c09f57a4d34abde08752e5f0e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-28lib/gpio.c: Validate num_gpioRichard Spiegel
In function _gpio_base3_value(), if num_gpio is 0 it'll cause the return of an undefined value, as no for loop will be executed. Assert that it's not 0. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I2b6537900fa41ebbee0171959f3ce236d360bc80 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28mb/google/octopus/variants/meep: Add weida touchscreen supportTony Huang
Add weida touchscreen support BUG=none BRANCH=master TEST=emerge-octopus coreboot, and verified that touchscreen works on meep. Change-Id: I4352322820237e4c2289410af6643e15109060a1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-28soc/intel/cannonlake: Change LPDDR4 to MEMCFGLijian Zhao
Modify the previously SOC_CNL_LPDDR4_INIT to SOC_CNL_MEMCFG_INIT, to make the infrasturture to handle both LPDDR4 and DDR4 cases in the future. Consider the case of reading SPD from SMBus other than providing SPD pointer directly. BUG=N/A TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I2f898147f67dd52b89cc3d9fc4e6b3854fa81f57 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28248 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28acpi: Hide Chrome and coreboot specific devicesDavid Wu
Some ACPI interfaces introduced by Chrome or coreboot do not need drivers outside ChromeOS, for example Chrome EC or coreboot table; or will be probed by direct ACPI calls (instead of trying to find drivers by device IDs). These interfaces should be set to hidden so non-ChromeOS systems, for example Windows, won't have problem finding driver. Interfaces changed: - coreboot (BOOT0000), only used by Chrome OS / Linux kernel. - Chrome OS EC - Chrome OS EC PD - Chrome OS TBMC - Chrome OS RAMoops BUG=b:72200466 BRANCH=eve TEST=Boot into non-ChromeOS systems (for example Windows) and checked ACPI devices on UI. Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1078211 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Tested-by: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28eve: Specify a unique ID for PS2 devicesLucas Chen
Windows certification tests will fail if the PS2 devices are using Plug and Play ID (PNP0303). For all Chromebooks we should use GOOG000A. BRANCH=eve BUG=b:110066056 TEST=AltOS certification test verify. Change-Id: I479471fdb3102e3b492612a4e6ad07612273083a Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1098874 Reviewed-by: Matt Delco <delco@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> Trybot-Ready: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28334 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28fsp/fsp2_0/coffeelake: Update CFL FSP headersLijian Zhao
Coffeelake FSP headers had been updated to version 7.0.3D.60. Original file location from https://github.com/IntelFsp/FSP/tree/master/ CoffeeLakeFspBinPkg/Include . BUG=N/A TEST=Build and flash, able to boot up into OS on whiskeylake rvp platform. Change-Id: I656da83e9042642576b785643e423ba47da8dd73 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28286 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28google/kukui: Init SPI bus for ECTristan Shieh
Set EC SPI bus config and init SPI bus according to the config. BUG=b:80501386 BRANCH=none TEST=EC is not working yet. This makes depthcharge go forward a little. Change-Id: Id9209b6429417430cfcf7f5a5a1659e7e4bc7866 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28251 Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28google/kukui: Set up GPIOs for ChromeOSTristan Shieh
Set up EC interrupt GPIO to boot depthcharge. Without this patch, depthcharge will fail to detect EC interrupt GPIO. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC interrupt GPIO. Change-Id: I0ec2c70c189a059219954e0384aaf98995285728 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-28Documentation: Normalize release note headingsTom Hiller
Headings are used to populate release note TOC. Change-Id: I39b018ed4498555044616a3aa660abe1047b5449 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/27720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-28Documentation: fix release version linkingTom Hiller
Correct links to coreboot release notes and fix related "document isn't included in any toctree" warnings. Change-Id: I6563da6f82f5686e54791331312434828c63f5a6 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/27719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28util/ipqheader: Fix typoElyes HAOUAS
Change-Id: Ibfcb870bb6e7ed747f8875520ab094def49e53cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-28util/romcc: Fix typosElyes HAOUAS
Change-Id: Ia9f0f1f527476900e6c54c60508600e16bea786f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28util/cbfstool: Fix typosElyes HAOUAS
Change-Id: I6967a106ce1286d633ddeeb041f582e65f9ea78c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28util/scripts: Fix typoElyes HAOUAS
Change-Id: If906e230c0cb71fc3cd283aeb85f8d1338c303c6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-28util/msrtool: Fix typosElyes HAOUAS
Change-Id: I36ed2c33f9bed3e640871283c2cb163d6800d1d5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-28siemens/mc_apl1: Extend circuit life by clock gating and power gatingMario Scheithauer
The firmware of devices connected to LPC should deassert the LPC CLKRUN# signal when there is no bus activity on LPC. Necessary changes: - Enable LPC CLKRUN# - Enable LPC PCE (Power Control Enable) - Enable LPC CCE (Clock Control Enable) - Remove I/O decoding range on LPC for COM 3 - Disable I/O UART driver Change-Id: I2fd80e3fdcf23658f97b8182a77df7e09ddf25d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-28vendorcode/amd/pi/00670F00: Remove IDS headersRichard Spiegel
Only Ids.h had definitions still in use, and they were removed or moved to AGESA.h. Now Ids.h, IdsPerf.h and IdsLib.h can be safely removed. BUG=b:112885948 TEST=Build grunt Change-Id: I031ae8eb5f34fee801365fc89ea11a881211e726 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28299 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28vendorcode/amd/pi/00670F00: Transfer TP_Perf_STRUCT to AGESA.hRichard Spiegel
Google is creating code to measure AGESA performance, which needs structure TP_Perf_STRUCT and associated definitions. In preparation to remove IDS headers, move the necessary definitions to AGESA.h. BUG=b:112885948 TEST=Build grunt Change-Id: I941a67a8889a9dbf35c9fd511c7f670623204134 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHzKevin Chiu
Bayhub eMMC controller default runs SD base 50MHz at the first power on. After boot into OS, mmc kernel driver will config controller to HS200/208MHz and send MMC CMD21 (tuning block). But Bayhub PCR register 0x3E4[22] (eMMC MODE select) is not clear after system warm reset. So eMMC will still run 208Mhz but there is no block tuning cmd in depthcharge. It will cause two Sandisk eMMC (SDINBDA4-64G-V/SDINBDA4-32G-V) to fail to load kernel and trap in 0x5B error (No bootable kernel found on disk). BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: Ic080682e67323577c7f0ba4ed08f8adafca620cc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28src/drivers/pc80/pc: Remove unneeded includeElyes HAOUAS
Change-Id: Ic238181d5c26ab8cf549137824a7c5e6c6d80ab1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-27drivers/intel/wifi: Make WIFI_SAR_CBFS user visibleFurquan Shaikh
This change makes WIFI_SAR_CBFS user selectable option so that it can be enabled/disabled from menuconfig along with the SAR filepath. BUG=b:112425861 Change-Id: Idf6feaefe68e7ebf6786c2c36e92a054fba4483c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-27util/nvramtool: Fix typos & remove unneeded whitespaceElyes HAOUAS
Change-Id: I0a704cba80d0439ae95db34a6b73df7be5b3b862 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28290 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27vendorcode/amd/pi/00670F00: Transfer IDS_CALLOUT to AGESA.hRichard Spiegel
Currently, IDS_CALLOUT macros are only used in stoneyridge callout. In preparation to remove IDS headers, move the definitions to AGESA.h. BUG=b:112885948 TEST=Build grunt Change-Id: Ia9717eb68fed2e568eaf169157c2837bb8232b7e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-08-27Documentation: Fix formattingTom Hiller
Fix formatting and missing close block quotes in nri_registers.md Change-Id: I5fa0136f4d7f05737a0d53ff9da7d2c77b22d675 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/28327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-27Documentation: Fix make rule for sphinx-autobuildTom Hiller
Execute sphinx-autobuild for livesphinx make rule Change-Id: I725392f1f132101eede8fed75e8d225c972ad1fe Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/28326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-27mb/google/poppy/variants/atlas: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:113101335 BRANCH=atlas TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU0: Package temperature above threshold' Change-Id: I2dc9d157b54500bae29e123978bb8ad6e05ef619 Reviewed-on: https://review.coreboot.org/28325 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/poppy/variants/nocturne: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:67459049 BRANCH=nocturne TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU3: Package temperature above threshold' Change-Id: Ic20c718fd3a496db7c7192feec4f230d924cc458 Reviewed-on: https://review.coreboot.org/28324 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27vendorcode/amd/pi/00670F00/Include/Ids.h: Remove IDS_ERROR_TRAPRichard Spiegel
The macro IDS_ERROR_TRAP is only defined, and never used. Also, IDSOPT_ERROR_TRAP_ENABLED is defined FALSE, so the macro would translate to nothing. Remove the macro and IDSOPT_ERROR_TRAP_ENABLED. BUG=b:112885948 TEST=Build grunt Change-Id: I2c3ca4b0a4a1f96f245ba2f4902fd0051dda77ef Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-27vendorcode/amd/pi/00670F00/Lib/AmdLib.c: Remove IdsErrorStopRichard Spiegel
Function IdsErrorStop() is only used within AmdLib.c function LibAmdMsrRead(), which in turn is only used once within PspBaseLib.c and three times inside AmdLib.c, all with well defined MSR addresses. IdsErrorStop() is used as a trap if MSR address is 0 or 0xFFFFFFFF, which clearly it's not. Therefore it can be safely removed from AmdLib.c. BUG=b:112885948 TEST=Build grunt Change-Id: I47ffcbd4fbae28b6d711a340f0ac3f3b007e8e4f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
Update TSR1 trip point from 48C to 50C. Also, change power limit2 minimum value from 8W to 10W. These are the values as per recent thermal tuning. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I33a9d2dc3e0e5566d95b1f1e46d3922dc8965b2b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28187 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27lib/nhlt: Use common function to set NHLT versionMarc Jones
Set NHLT version with get_acpi_revision(NHLT) to keep all table versions in sync. Change-Id: I4ea9d511142e4ea68e651e58c2c985e739c032d9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28279 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/kahlee: Fix I2C bus 0 timing for GruntAkshu Agrawal
This commit fixes the values and thus fixes the issue of audio device not getting detected on random reboots. Change-Id: I34a4f62815d192005c3324d4f71b0aba377fe738 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/28280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-08-27mb/supermicro/h8qme_fam10: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: Ie3ee4acfd272991133f02a56df6e23aa6071d3e9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-27mb/kontron/986lcd-m: Use common pnp_{enter,exit} functionsElyes HAOUAS
Some unneeded includes are also removed. Change-Id: Icd518c46d8503d11d24466c30840d7e514e9a05d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-27intel: Use common HPET table revision functionMarc Jones
Use get_acpi_table_revision(HPET) to keep all table versions in sync. Change-Id: Idb5e8ccd49ec27f87a290f33c62df3c177645669 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27x86/acpi: Update MADT table versionMarc Jones
Update the MADT table version to sync with the FADT table version. All current coreboot FADT tables are set to ACPI_FADT_REV_ACPI_3_0 and the MADT should be set to match. This error was found by running FWTS: FAILED [MEDIUM] SPECMADTFADTRevisions: Test 2, MADT revision is not in sync with the FADT revision; MADT 1 expects FADT 3.0 but found 4.0 instead. BUG=b:112476331 TEST-Run FWTS Change-Id: If5ef53794ff80dd21f13c247d17c2a0e9f9068f2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
Most FADT report using ACPIv3 FADT table. Using the get revision function keeps the table versions in sync. Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27x86/acpi: Add ACPI table revision functionMarc Jones
Use a single function to set ACPI table versions. This allows us to keep revisions synced to the correct levels for coreboot. This is a partial fix for the bug: FAILED [MEDIUM] SPECMADTFADTRevisions: Test 2, MADT revision is not in sync with the FADT revision; MADT 1 expects FADT 3.0 but found 4.0 instead. BUG=b:112476331 TEST-Run FWTS Change-Id: Ie9a486380e72b1754677c3cdf8190e3ceff9412b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28276 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27vendorcode/amd/cimx/sb*: Rename RSDP headerMarc Jones
Rename RSDP to RSDP_HEADER to match other AMD vendorcode and to not pollute the namespace. We will use RSDP in a future patch. Change-Id: I3b66135ae1732b86b5ebfcdc01a850a0d9d3eb50 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-27siemens/mc_apl1: Disable PCI clock outputs on XIO bridgeMario Scheithauer
This patch disables the unused PCI clock outputs on the XIO2001 PCI Express to PCI Bridge. Change-Id: I0b9cf51a713f4ab46e71d250397486d136c26177 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
add device "WCOM Digitizer" and "Synaptics Touchpad" for bobba BUG=none BRANCH=master TEST=emerge-octopus coreboot Change-Id: Ie0bf8ebab6d9cb9c8fe42a500efaa3d11ae359db Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-26util/ifdtool: Fix typoElyes HAOUAS
Change-Id: I53ddff302681737006f40ca8b79ec0735f1e6e45 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-26util/superiotool: Fix typoElyes HAOUAS
Change-Id: I62fed1084efc3224c9563619d57fbdc5040ddbbc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-26util/pmh7tool: Add tool to dump PMH7 registersEvgeny Zinoviev
Change-Id: I05ccb5a9a861fe44efec794aafe1805062543d53 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/27776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-26superiotool: fix wpcd376iStefan Tauner
According to the datasheet (rev. 1.6) there is no SP2 (apart from some typos) and the IR is actually implemented as SP3 in LDN 0x16. Additionally, there is LDN 0x15 to set up CIR-specific options of the IR serial port, which was missing as well. Change-Id: I34d90d8c44f11a4f62ccc4b836409cc443fb7952 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-25mb/intel/coffeelake_rvp: Remove superfluous header fileArthur Heymans
TEST: same sha256sum with BUILD_TIMELESS=1. Change-Id: Icf3368bcf1351f0e7cd4041c3792d76362aec9e5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-08-25Revert "drivers/spi/spi_flash: don't allocate unbounded stack memory"Patrick Georgi
This reverts commit c5ee35ff861fe4447fd80119f645fba7bfd3a184. Reason for revert: breaks boards, uncertain if it _really_ works. Change-Id: I9ba2ba877b9a391306f89295c0c1d0e2d011c5ea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28338 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jean Lucas <jean@4ray.co> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-24siemens/mc_apl1: Select DDR50 mode for eMMCMario Scheithauer
To increase the lifetime of the circuit, it is necessary to reduce the eMMC speed to DDR50 mode. Change-Id: I40658b44a99e6600ed00950a1a177961f0055e7a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 06:18:32 +0000