| Age | Commit message (Collapse) | Author |
|---|
|
1. Add _DSM method
2. Add support to turn on/off the power enable signal in _PS0/_PS3
methods.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I4f944caa535bdc946eef1e0f518fe3ee344187b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Converts bit fields macro to target PAD_CFG_*() macros, which were
hidden in the comments. To do this, the following command was used:
./intelp2m -n -t 1 -p apl -file ./test/up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I266ec6fa10a9691a7b7d3cd6f2792624e8bd53d5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch excludes bit fields that must be ignored in order to convert
current macros to target PAD_CFG_*() macros. The following commands
were used for this:
./intelp2m -ii -fld cb -ign -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Change-Id: Ic9b6e63c1b84b97726886bef35c434dd9153eb78
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Use the intelp2m utility [1] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fiends macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... Also use the -ii options to
generate the target macro in the comments, so that it is easier to
understand what result we should get:
./intelp2m -ii -fld cb -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
[1] https://review.coreboot.org/c/coreboot/+/35643
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I2523439af8842365c7de901bdfad85ad16d25dcf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
From a log of a machine using Crystal Well CPU [1], Crystal Well CPUs
use some new PCI IDs. Without this patch, the Crystal Well northbridge
cannot be initialized in ramstage, thus the machine cannot boot. Some
PCI IDs of Crystal Well related devices can be found in the PCI ID
database [2].
Tested with i5-4570R (with LGA1150 mod) on ASRock H81M-HDS. The board
boots to SeaBIOS with boot screen displayed on HDMI output, and then
boots Arch Linux on a USB disk.
[1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/DNHLQTNTRQT43T67DG7L2HVI5CV74ZCM/
[2] https://pci-ids.ucw.cz/read/PC/8086
Change-Id: Icfe55323fd06187148c788ebfa7b679b6944e4f3
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41658
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ife4ae71fd977d32d7b11ee7e2a1a7e2ec3eec52f
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Without this change, there will be no console output when using a
Crystal Well CPU.
Tested with i5-4570R (with LGA1150 mod) on ASRock H81M-HDS.
Change-Id: Id18645c52d9c4a4ea7acb602bcb39b796d9e24b9
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Many places in coreboot seem to like to do things like
assert(CONFIG(SOME_KCONFIG));
This is somewhat suboptimal since assert() is a runtime check, so you
don't see that this fails until someone actually tries to boot it even
though the compiler is totally aware of it already. We already have the
dead_code() macro to do this better:
if (CONFIG(SOME_KCONFIG))
dead_code();
Rather than fixing all these and trying to carefully educate people
about which type of check is more appropriate in what situation, we can
just employ the magic of __builtin_constant_p() to automatically make
the former statement behave like the latter.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I06691b732598eb2a847a17167a1cb92149710916
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to my SC7180 reference manual, these three GPIOs are in the
NORTH TLMM, but our pin table lists them as SOUTH. That means all
accesses our code has been doing to them have just been hitting empty
address space.
BUG=b:160115694
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If9c03ac890a7975855394c2e08b8433472df204d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Adding implementation of standard library strstr()
See https://review.coreboot.org/c/coreboot/+/43741 for context.
Change-Id: I63e26e98ed2dd15542f81c0a3a5e353bb93b7350
Signed-off-by: jbk@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
ACPI_GPIO_IRQ_EDGE_BOTH sets both edges as wake. The desired behavior is wake on rising edge, change to ACPI_GPIO_INPUT_ACTIVE_LOW.
Fixing for both Volteer and Volteer2 variants.
BUG=b:146083964
BRANCH=None
TEST=tested on a Volteer
Change-Id: I2d3339151bf4e2cbae60aaf97ba1bd7909a2b9a9
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fix multiple issues allowing to boot until "Payload not loaded":
* The FMAP_CACHE was placed in memory mapped flash
- Place the FMAP_CACHE in DRAM.
* The FMAP_CACHE was overlapping the BOOTBLOCK, which has a default size
of 128KiB.
- Increase the bootblock size in memlayout to 128KiB to match the FMAP.
* The heap in bootblock wasn't usable.
- Add a linking check in armv7 common bootblock to relocate itself to
the linked address.
* A FIT payload couldn't be compiled in as the POSTRAM_CBFS_CACHE was
missing.
- Add the POSTRAM_CBFS_CACHE to memlayout.
* The coreboot log is spammed with missing timestamp table error messages
- Add TIMESTAMP table to memlayout.
Tested on QEMU armv7 vexpress.
Change-Id: Ib9357a5c059ca179826c5a7e7616a5c688ec2e95
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The 'burnet' and 'esche' in Kconfig.name should have two spaces
after the arrow.
BUG=None
TEST=make menuconfig
BRANCH=kukui
Change-Id: If7cc31cf459082a797445fb8223b3d9cbde72901
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43986
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2d14902f9d975e89cd2842f4c12eab8ca4018fbf
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44018
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I397b1dc0c3faf65811889d4c5814d6dcca7fe6b4
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43748
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Avoid dereferencing a null pointer.
Found-by: Coverity CID 1430549
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I53f6a38aac6e7f94c3c370996b3b82ca0d88dac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update ELAN i2c-hid touchpad configuration
BUG=b:160741785
BRANCH=None
TEST=Verify touchpad is working fine.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I2549048766d0707666910bd86c46ac9201bf3905
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43998
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For dirinboz
DRAMID 0x9: K4AAG165WA-BCTD
BUG=b:161579679
BRANCH=master
TEST=build
Change-Id: I28c0d23f96c5b9c975ffead3a1cac66cbda8c293
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
PCIe bus:function specifiers need to be coalesced the same way
functions are coalesced during bus enumeration. Invoke PCIe root port
devicetree update to swap the enabled root port devices with the
disabled devices.
At this point, the TGL pci_devs.h only describes the PCH-LP, so only
the PCH-LP root ports are listed in this patch. We'll need to add
additional PCIe root ports when PCH-H support is added.
BUG=b:162106164
TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is
swapped with the PCIe device 1c.0 corresponding to Root port 1.
Change-Id: I9230de8b1818f3f2115dab923841fd0e7778be62
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change updates the mipi_camera driver to handle shared power
resource between multiple cameras. This is achieved by adding a guard
variable and methods to manipulate the guard variable before calling
the actual platform method which enables or disables the resource.
PowerResource will call these guarded methods to enable or disable the
resource. This protects the shared resource from being enabled or
disabled multiple times while the other camera is using the resource.
Example:
Consider a platform where two cameras are sharing a GPIO resource 0xXX
and both the cameras calls enable and disable guarded methods for this
GPIO. Actual platform disable method for the GPIO is called only after
the last camera using the GPIO calls DSBx method and RESx becomes 0.
Scope (\_SB.PCI0)
{
Name (RESx, Zero)
Method (ENBx, 0, Serialized)
{
If ((RESx == Zero))
{
\_SB.PCI0.STXS (0xXX)
}
RESx++
}
Method (DSBx, 0, Serialized)
{
If ((RESx > Zero))
{
RESx--
}
If ((RESx == Zero))
{
\_SB.PCI0.CTXS (0xXX)
}
}
}
Change-Id: I1468459d5bbb2fb07bef4e0590c96dd4dbab0d9c
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43003
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also document the maximum nuber of lanes for the different platforms.
Change-Id: I52356d4bbb407ee8a36fce18ad94d73f39c01345
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44069
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This config is meant to build-test several options, such as SMMSTORE,
UBSAN, SIL3114 driver, EM100 support, code coverage and debug options.
Please do not try to use it on real hardware. Or maybe do try.
Change-Id: I8bc19a1987b405d5a654276050b00b956acbdf36
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43977
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Giant commit aee7ab2 (soc/intel/braswell: Clean up) reformatted comments
to follow the coding style, among many other things. This commit updates
some comments on Bay Trail with two objectives: follow the coding style,
and reduce the differences between Bay Trail and Braswell.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: Ibe942a20c624e2c74801c8816616ec83851949af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
SeaBIOS on Bay Trail would time out when trying to access a SATA drive.
Turns out that there's two mistakes in the SATA initialization sequence:
- PCI register 0x94 is wrongly cleared with a bitwise-and operation.
- PCI register 0x9c is instead written to 0x98, clobbering the latter.
After correcting them, SeaBIOS can boot from SATA on Asrock Q1900M.
Change-Id: I5cc4b9b1695653066f47de67afc79f08f0341cc5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- This is a reverse engineered re-implementation of refcode.elf on
Bay Trail
- Tested on GBYT4, should work everywhere as it's meant to behave
exactly the same as the binary refcode
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I91977c509022b0078804dc151d27296260e24bc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43133
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Google Ninja does not change.
Change-Id: I7e74f342c0545f8d2a2128de4162581e5dc01e17
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These now fit in 96 characters.
Tested with BUILD_TIMELESS=1, Google Ninja does not change.
Change-Id: I7e1dc0126fa4d64f75e686d68c4f70f7109c6da0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These now fit in 96 characters.
Tested with BUILD_TIMELESS=1, Facebook fbg1701 remains identical.
Change-Id: I4275c81d22c03c461c184f26367db80b828033a9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Spell `KiB` with lowercase `i`.
Tested with BUILD_TIMELESS=1, Facebook fbg1701 remains identical.
Change-Id: Ief606686ee3866a7ede75d097feb510418621fe8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
FSP default UPD for SkipMpInit is set to 0 which refers to run CPU
feature programming on all cores (BSP + APs).
Setting SkipMpInit=1 is not recommended as it will only limit CPU
feature programming on BSP.
TEST=Able to perform CPU feature programming by FSP on all cores
using external MP PPI services.
Change-Id: I22e70f5f15e53c5fabd78cc3698c4d718b607af6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: Ief8ab6ad280d8a2625404c19d57cd2a24f23cf13
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39533
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia2ddb4eceab29810b22766a0f241ba4b11e79538
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44057
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Jenkins complains about `const char *` and says it should instead be
changed to `const char *const`. So, change it so that Jenkins is happy.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: Iecd5fecdefdc2effd0114706648747460d0a4a72
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42630
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
System BIOS needs to program the Virtual Channel configuration.
Change-Id: Ic8ff17b3a1c4414633a658c60f2c4f7b195e5825
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43821
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Haven't found the official documentation for the DXIO lane mapping on
Pollock, so I had to guess that from the working configurations used in
google/dalboz and amd/cereme.
Change-Id: I53aac0aeba8466ae456f0f935114b587b64eeeaa
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44063
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like UBSan isn't being build-tested, and the toolchain has been
updated several times since UBSan support was added. Unexpectedly, it
no longer builds when using GCC from the current toolchain version.
To fix this, rename an error handler and add a newly-introduced handler
for `__ubsan_handle_pointer_overflow`, which works like the existing
handlers. A config file to allow build-testing UBSan is added later.
Change-Id: I5980730d8d22fa1d0512846c203004723847cc6d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add TXT ramstage driver:
* Show startup errors
* Check for TXT reset
* Check for Secrets-in-memory
* Add assembly for GETSEC instruction
* Check platform state if GETSEC instruction is supported
* Configure TXT memory regions
* Lock TXT
* Protect TSEG using DMA protected regions
* Place SINIT ACM
* Print information about ACMs
Extend the `security_clear_dram_request()` function:
* Clear all DRAM if secrets are in memory
Add a config so that the code gets build-tested. Since BIOS and SINIT
ACM binaries are not available, use the STM binary as a placeholder.
Tested on OCP Wedge100s and Facebook Watson
* Able to enter a Measured Launch Environment using SINIT ACM and TBOOT
* Secrets in Memory bit is set on ungraceful shutdown
* Memory is cleared after ungraceful shutdown
Change-Id: Iaf4be7f016cc12d3971e1e1fe171e6665e44c284
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Don't emit RMRR for the iGPU if it's not present. This is done on
other platforms as well.
Fixes an DMAR error seen in dmesg on platforms without iGPU.
Change-Id: Iafe86e6938a120b707aaae935cb8168f790bb22f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43994
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DeltaLake is a single socket server. Its platform design has 1 DIMM
slot per channel. There are 6 DIMM slots.
Configure DIMM_MAX to overwrite SOC default.
Change-Id: I47ecc81452fe59ed59fd3a239ffe329cbc031d7a
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44048
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPX-SP processor has 2 IMC, there are 3 channels per IMC,
2 DIMMs per channel.
It supports DDR4.
Configure default values for DIMM_MAX and DIMM_SPD_SIZE accordingly.
Change-Id: I66cc512465362d5ba04dc36534360c94ca23e77a
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43982
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add driver for OCP specific ipmi commands. With this driver, OCP
specific ipmi command can be used after implementing functions here.
TEST=Build with CB:42242 on Delta Lake, select Kconfig option:
IPMI_OCP and add device in devicetree to open this function.
Use ipmi-util in OpenBMC to dump raw data and check if this
function work.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I2efa85978ec4ad3d75f2bd93b4139ef8059127ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43996
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Execute "dmidecode -t 4" to check if the processor information is correct for Deltalake platform
Change-Id: I5d075bb297f2e71a2545ab6ad82304a825ed7d19
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use the name of the assembly instruction it uses, mfence.
Change-Id: I98d7926434694a41fb6415bed4276741fa7996af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The only reason to use a named choice statement is if you plan on
having the choice statement in multiple places. Since the `TGL_EC`
name is not used anywhere else, we might as well get rid of it.
Change-Id: Ic0bddefd007ef961bbff61fd656475cae78148e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `smbios.c` file is rather long. To improve navigability, place weak
function definitions on a separate compilation unit.
Change-Id: Idd2a4ba52b6b23aad8fd63e66ffa747d49ea713d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Most of `smbios_fill_dimm_manufacturer_from_id()` is noise. Factor the
switch into its own function to improve readability.
Change-Id: Ia0757c01572709d16589a4ed622ca2d2cb69dda2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
We can reduce the amount of duplicated code with a ternary operator.
Change-Id: I8be95a62c54749d39e3e8821abd46d9f467a5a49
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Put `__weak` at the beginning of functions and reflow lines to leverage
the increased line width of 96 characters.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I3a5fd2d4344b83e09f89053c083ec80aa297061e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the maximum DRAM capacity and slot count read from CAPID0_A
registers on Sandy Bridge and Haswell.
While the register isn't part of the Core Series datasheet, it can be
found in the corresponding "Intel Open Source Graphics Programmer's
Reference" datasheets.
Note that the values for DDRSZ (maximum allowed memory size per channel)
need to be halved when only one DIMM per channel is supported. On mobile
platforms, all but quad-core processors are subject to this restriction.
Tested on Lenovo X230:
On Linux, verify that `dmidecode -t 16` reports the actual maximum
capacity (16 GiB) instead of the currently-installed capacity (4 GiB) or
the max capacity assuming two DIMMs per channel is possible (32 GiB).
Change-Id: I6e2346de1ffe52e8685276acbdbf25755f4cc162
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The `GetPhysicallyInstalledSystemMemory` API call, at least on Windows
10, returns an error if SMBIOS tables are invalid. Various tools use
this API call and don't operate correctly if this fails. For example,
the "Intel Processor Diagnostic Tool" program is affected.
Windows then guesses the physical memory size by accumulating entries
from the firmware-provided memory map, which results in a total memory
size that is slightly lower than the actual installed memory capacity.
To fix this issue, add the handle to a type 16 entry to all type 17
entries.
Add new fields to struct memory_info and fill them in Intel common code.
Use the introduced variables to fill type 16 in smbios.c and provide
a handle to type 17 entries.
Besides keeping the current behaviour on intel/soc/common platforms, the
type 16 table is also emitted on platforms that don't explicitly fill
it, by using the existing fields of struct memory_info.
Tested on Windows 10:
The GetPhysicallyInstalledSystemMemory API call doesn't return an error
anymore and the installed memory is now being reported as 8192 MiB.
Change-Id: Idc3a363cbc3d0654dafd4176c4f4af9005210f42
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Set platform defaults for SPI settings in Kconfig for EFS.
BUG=b:158755102
TEST=Build and boot test on Tremblye and Morphius. Verify
values in output image in a hex editor. Measure 1st x86
timestamp, perf improves by over a second.
Change-Id: I765dada14700f4800263d2d3844af07fad0e5b71
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43303
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There was a mix of open coding DXIO logical lane numbers and clkreq
pins. And there are separate macros depending on the baseboard
as well as processor type. Remove the indirection and supply the values
directly in the descriptors.
BUG=b:162423378
Change-Id: I779cb0a514e3b668265e6039d6e7e7bd0f3d49ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since regions in bootmem are sorted by increasing base address, we may
bail out of the search loop as soon as the region_base is bigger than
the max address allowed.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I44b44bf9618fd0615103cbf74271235d61d49473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43512
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update to match the 0.8.5.7B release of PSP blobs.
BUG=b:162057232
TEST=Boot Trembyle with, and without, new blobs. Inspect vboot
using a serial-enabled bootloader
Change-Id: I03f11cfc1dc8f511661def1c81421f8558dcd1f5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44041
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:162057232
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifd4ac0655f7ada5ec10a266fdb2b930861959215
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44040
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Embedded Firmware Structure should contain SPI speed, mode
and Micron support for the PSP to program. Add Kconfig options
to specify these values to use for future platform changes.
BUG=b:158755102
TEST=Test menuconfig and platform build for Trembyle and Mandolin.
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Change-Id: I78558fa3fa27c70820f0f3d636544127adab6f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42567
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits the device operations for internal and external PCIe
GPP bridges so that the external bridges use `pciexp_scan_bridge()`
instead of `pci_scan_bridge()`. `pciexp_scan_bridge()` is required for
external GPP bridges to enable ASPM on downstream devices if supported.
BUG=b:162352484
TEST=Verified on Trembyle:
$ lspci -s 1:00.0 -vvv | grep ASPM
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64u
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ice2aa3e4758adccf7b0b89d4222fc65a40761153
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Configure the correct eMMC present flag for Ezkinil new added sku_id.
0x5A020015 NVME present
0x5A020016 eMMC present
0x5A020017 eMMC present
BUG=b:159761042
TEST:none
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I1b89cc4568283d5dbebf0ab7ac578368d3a3637e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43753
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:162010077
Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to MP MB to port SMBIOS type8 data.
Tested=Use "dmidecode -t 8" to dump SMBIOS data,
and check if type8 tables are implemented.
Change-Id: I356e645774d78c623c1398c8b1473562e1529cf2
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested on OCP Delta Lake, the timer action can be set correctly.
Change-Id: I1013169e12455e01214d089c9398c78143af4df8
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44019
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add overridetree info for the touchscreen.
BUG=b:160129126
TEST=cros flash-ap -b dedede
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I55fc0749b824a0bf4b615d02bd8bc39bcdd589e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
It is expected both of TCSS D3Hot and D3Cold are enabled by default.
BUG=None
TEST=Verified both of TCSS D3Hot and D3Cold configuration on TGLRVP.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Id569d8191f82f12379b57a9c50aec31776220bb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
It is expected TCSS D3Hot is enabled. D3Cold configuration is
through SoC stepping determination. D3Cold is disabled on pre-QS
platform and enabled on QS platform.
BUG=None
TEST=Verified both of TCSS D3Hot and D3Cold configuration on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I9a8b838dcb449ca78d15b18543d97d84b59417ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44004
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update configuration for both of TCSS D3Hot and D3Cold. It is expected
D3Hot is enabled for all platforms. Because there are known limitations
for D3Cold enabling on pre-QS platform, this change reads cpu id and
disables D3Cold for pre-QS platform. For QS platform, D3Cold is
configured to be enabled.
BUG=None
TEST=Verified D3Hot is enabled, D3Cold is disabled for pre-QS (cpu:806c0)
and enabled for QS (cpu:0x806c1).
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I534ddfefcd182f5b35aa5e8b461f0920d375a66d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43980
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently HDA gets enabled by the option EnableAzalia, but
this duplicates the devicetree on/off options. Therefore use
the on/off options for the enablement of the HDA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableAzalia setting.
Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently HECI3 gets enabled by the option Heci3Enabled, but
this duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the HECI3 controller.
I checked all corresponding mainboards if the devicetree configuration
matches the Heci3Enabled setting.
Change-Id: I4f99d434dfee49a9783e38c3910b9391d479cb83
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43864
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this
duplicates the devicetree on/off options. Therefore use the
on/off options for the enablement of the eMMC controller.
I checked all corresponding mainboards if the devicetree configuration
matches the ScsEmmcEnabled setting.
Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Currently TraceHub gets enabled by the option EnableTraceHub, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the TraceHub controller.
I checked all corresponding mainboards if the devicetree
configuration matches the EnableTraceHub setting.
Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently SMBus gets enabled by the option SmbusEnable, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SMBus controller.
I checked all corresponding mainboards if the devicetree configuration
matches the SmbusEnable setting.
Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Currently LAN gets enabled by the option EnableLan, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the LAN controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableLan setting.
Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently SATA gets enabled by the option EnableSata, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SATA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableSata setting.
Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
sustained_power_limit = 12w
fast_ppt_limit = 24w
slow_ppt_limit = 20w
BUG=b:162377903
BRANCH=master
TEST=emerge-zork coreboot chromeos-bootimage
Change-Id: I9baf9990e26edbbadfba85bc16b380c46684033d
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change updates TGLRVP configuration to have USB Type-C connector
device properties filled into ACPI SSDT.
TEST=Built and booted to kernel on tglrvp boards. Verified the USBC
scope under LPCB.EC0.CREC with required connector device properties.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ifd4c59afb3b8a222598fd4ff36d72c4b877bdad2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0b7bdd9f46846bc9c3d9672b50dfe2fb166fcb78
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ic09c04cfa18408c61d7e99ea29bccc23acbd7144
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update kconfig.md to reflect that defconfig (instead of mini-config)
file is generated by running "make savedefconfig".
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4075e5b51e3c504eaad25e3abfc52ba593364ee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The HSIO tuning guide recommendation for the default USB3 settings is to
have de-emphasis set to -3.5dB with the equation 20*log(X/64). 0x29 results
in a value close to -3.5dB and it is the value that was used for the default
on past platforms so I used it here as well.
BUG=b:160721468
TEST=Ensure WWAN device does not disconnect during use.
Change-Id: Ia594996cb55523dacce0d4bef98cc217321c62de
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory part being added is:
MT53E512M32D2NP-046 WT:E
K4U6E3S4AA-MGCR
H9HCNNNBKMMLXR-NEE
MT53E1G32D2NP-046 WT:A
K4UBE3D4AA-MGCR
BUG=None
TEST=Build the magalor board.
Change-Id: I7bb19d6d4a66e66fed0564592c803c2af1045b0c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch uses the fill_processor_name function in order
to fetch the CPU Name.
TEST = Successfully able to build boot Waddledoo and verify the
cpu_name from CPU log "CPU: Genuine Intel(R) CPU 0000 @ 1.10GHz".
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I532e05d9bb71fdff24e086e81ec72ffe8dc2c22d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43480
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Strip manufacturer information from SPDs before injecting into APCB.
This allows more flexibility around changing DRAM modules in the future.
BUG=b:162098961
TEST=Boot, dump memory info
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1bbc81a858f381f62dbd38bb57b3df0e6707d647
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I34b8083eb14d5f82699cf92744000a416d2816ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This is already defined in <commonlib/helpers.h> and it gets included
implicitly by some other header. Fixes building with code coverage.
Change-Id: Id2dc6cc34b6f1d351d8e1b52d8cc4ada8666c673
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add interrupts for all enabled superio devices to quiet the warning
about missing interrupts in devicetree.
Vendor uses interrupt 0x00 for all devices except SUART* and KBC, so
let's do that, too. This also changes SWC from 0x0b to 0x00.
Verified with superiotool on X11SSM-F.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I7a6dc7345f020e53415a7d0d104ce93ab4b194fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonas Löffelholz
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They're more or less the same but reworked for hopefully some more
clarity. There have been some best practices around documenting the
reason for expedited processing so let's make them official, too.
Change-Id: I620e48016a1ceda2ac43f26624ed21af01f6a0a5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43484
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting
the timer countdown value in romstage. By default it would start the timer
and trigger hard reset when it's expired. The timer is expected to be
stopped later by payload or OS.
Add RO_VPD and RW_VPD sections.
Tested on OCP Tioga Pass.
Change-Id: I53b69c3c5d22c022130fd812ef26097898d913d0
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When emitting a fan's _FPS (Fan Performance States) table, the revision
field was missing. According to ACPI spec 6.3, the current revision is
zero, so add that Package entry before the others.
BUG=b:149722146
TEST=verified first element of \_SB.DPTF.TFN1._FPS is 0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If16d4751f1d924807f5087d93b348e58d5265197
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43978
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new utility for converting a pad configuration from
the inteltool dump to the PAD_CFG_*() macros [1] for coreboot and GPIO
config data structures for FSP/sdk2-platforms/slimbootloader [2,3].
Mirror: https://github.com/maxpoliak/pch-pads-parser.git
[1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h
[2] https://slimbootloader.github.io/tools/index.html#gpio-tool
[3] 3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Include/GpioSampleDef.h
Change-Id: If3e3b523c4f63dc2f91e9ccd16934e3a1b6e21fa
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35643
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:159198385
TEST=confirm both using Mandolin
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I91654817608ab62e4104959b8876333911b90175
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43299
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIT(x) needs <types.h>.
Change-Id: Icaeda969cae52d9c62d976db4ead0e734efa838c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add bluetooth reset gpio 143 to dalboz baseboard devicetree
Add bluetooth reset gpio 14 to trembyle baseboard devicetree
Remove bluetooth reset_gpio when not supported on a specific board
variant.
BUG=b:157580724
TEST=Boot Ezkinil with Realtek 8822CE, observe log
[ 12.240720] Bluetooth: af_bluetooth.c:bt_init() HCI device and connection manager initialized
[ 12.249272] Bluetooth: hci_sock.c:hci_sock_init() HCI socket layer initialized
[ 12.256520] Bluetooth: l2cap_sock.c:l2cap_init_sockets() L2CAP socket layer initialized
[ 12.264575] Bluetooth: sco.c:sco_init() SCO socket layer initialized
[ 12.273700] usb 3-2: GPIO lookup for consumer reset
[ 12.273702] usb 3-2: using ACPI for GPIO lookup
[ 12.273705] acpi device:18: GPIO: looking up reset-gpios
[ 12.273707] acpi device:18: GPIO: looking up reset-gpio
[ 12.273711] acpi device:18: GPIO: _DSD returned device:18 0 0 0
[ 12.273737] gpio gpiochip0: Persistence not supported for GPIO 14
[ 12.273960] usbcore: registered new interface driver btusb
Change-Id: I14e3ef099d5b8f48c915b41284039b3508dec975
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add find_dev_nested_path helper function to simplify finding deeply
nested devices.
BUG=b:157580724
TEST=Find bluetooth device on dalboz
Change-Id: I48fa5fcad0030fb6dcea97b9fc76e1d3d3f9b28f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable the Kconfig flag VBOOT_VBNV_CMOS_BACKUP_TO_FLASH for psp_verstage
to save the vbnv data to the SPI rom.
BUG=b:161366241
TEST=Boot Morphius, Read rom from SPI and extract the RW_NVRAM region.
See that it's getting updated.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I0d4b92fa321a8409468b8d8fc40be0d4b57b664b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43487
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SPI needs to be initialized to save VBNV (Vboot Non-Volatile memory)
to flash.
BUG=b:159811539
TEST=Build & boot.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iebf3ed3f5d6be0dda717d91d5b2fbcf2a1cc43cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Built image-tglrvp-up4.bin successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I8423ddbb5bc189899a9e19e7da6e2ee7b7fecc18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The commit hash is the same as the SeaBIOS one, and is indeed from the
SeaBIOS repository.
Change-Id: I820b9b748778050fc694c13b1e2b2fc80885b4f1
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43749
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If48cd055477011cece7921cea462aab176e170fb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently, if PSPBTLDR_FILE is empty, the md5sum will hang forever on
stdin, leading to the appearance of a hung script. This is
confusing.
There's no option to md5sum to say "you must use this file", so instead,
use dd with if to ensure we at least get an error if the file is not found.
Not optimal, but better than what we have now.
Change-Id: Ia13035bc592bdf2a515dfd2e052ae9135e218612
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fill in the new fields introduced with version 3.0 and install the new
entry point structure identified by _SM3_.
Tested on Linux 5.6 using tianocore as payload:
Still able to decode the tables without errors.
Change-Id: Iba7a54e9de0b315f8072e6fd2880582355132a81
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
