| Age | Commit message (Collapse) | Author |
|---|
|
This patch creates alias for GEN_PMCON_A to maintain parity with other
IA SoC PMC register definitions.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id9a23c58a325cb544c50cbda432fe3117eea22fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
Added `MS4V` macro for GEN_PMCON_A bit 18 as per EDS doc:558579.
Additionally, removed `PMC_` prefix from PMC configuration register
macros GEN_PMCON_A/B and ETR3.
Moved PMC PCI device macro from pmc.h to pci_devs.h and name PCH_PMC_DEV
to PCH_DEV_PMC. Also, adjust PCI macros under B0:D31:Fx based on
function numbers.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2690ccd387b40c0d89cf133117fd91914e1b71a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Alder Lake SoC deselects Kconfigs as below:
- USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
- USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
to skip FSP notify APIs (Ready to boot and End of Firmware) and make
use of native coreboot driver to perform SoC recommended operations
prior booting to payload/OS.
Additionally, created a helper function `heci_finalize()` to keep HECI
related operations separated for easy guarding again config.
TODO: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects required configs.
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0198c9568de0e74053775682a44324405746389a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs i.e. Ready to Boot and End Of Firmware.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects all required configs:
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I70bde33f77026e8be165ff082defe3cab6686ec7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Disable unused USB2/TCSS Ports.
BUG=b:217238553
TEST=FW_NAME=redrix emerge-brya coreboot
Change-Id: I1cdee5b6dc56accb52ba1bf636bdf753a7bfd199
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support of MENU key (aka hamburger) for Chromebooks with Vivaldi
keyboard
BUG=b:215038215
TEST=manually tested on Anahera device: pressing T13 key opens menu
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I07873dd9385c743a6512408688ec44a5e97219f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61835
Reviewed-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Lance Zhao
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change copies ec_commands.h directly from the Chromium OS EC repo,
with the exception of changing the copyright header to SPDX format.
Update to commit hash af9a119
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I1f2a140257d6127fb19bb514bc345466247b7499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I441369bc47ad4758c2188cb4e0f7e971607f72d5
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Compiling efs_fmap_check.c depends on fmap_config.h already being
generated, so add this dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85e0900574f928d1594f8d1831ba58f959b75d27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Also add the Makefile dependency on the fmap_config.h file to make sure
that this file already exists when it's included.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I540ea2c14fd187845efd3c0c8c1e4b8f82c8cac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ie8535d97e883d3fed9414fb5ba65a0797b989c0d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I2fd8470ed2b8e8f00de4ba64258aac1db52744c1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I61f8f39ce7651d499756f4975840f32f89b04ca7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow thermal team design to remove TSR3 sensor and update thermal
table for next build. The DPTF parameters were verified by thermal
team.
BUG=b:219690502
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0e34fabe546b6eabb3d3adad583668a15a1d908b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The CIO2 port was incorrectly set to 2, while the correct port is 1
BUG=b:210801553
TEST=Build and boot on vell, camera works correctly now
Change-Id: I53d8448ed0e12777456af9b0bc65a04595b47e37
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61946
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1e0b51ee4db73bdff79365d4954a3245a430f140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62051
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e4837489d90c2edd7deaa2af0533085f1ff5ae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62049
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id44213c7dd4d0df97a6c57d7f1b9d950baaf0e1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62047
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie304b08b0b1bbad5547a0169ea8056d703141391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61830
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a4bc1aae8e815b882a607432e40caf1066453b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61828
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I07cef3b619991afb6337c38a631ee159677d30a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61826
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0274f03926d97fc543b98f3fb961580283202806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61825
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I33e4501fd689d642682891c7f5bc9cb7ca5e331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61824
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1940246fd88db29054f85c43672adc97dc90fa04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61823
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3d8a8a7e2b1e490726986139014cdfcf1271c64b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61805
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses ACPI _PLD macros for USB Type A and C ports.
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idb8f30b2d1069aea1d5ce7c5dda7f99de33a7c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61803
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds two ACPI macros for USB port A and C _PLD object
configuration as:
1. ACPI_PLD_TYPE_A
2. ACPI_PLD_TYPE_C
The configurable parameters are
- Panel, Port is exposed on which face of a panel.
- Horizontal, Horizontal position on the panel where the device
connection point resides.
- Group
- Token, Unique numerical value identifying a group.
- Position, Identifies this device connection point’s position
in the group (i.e. 1st, 2nd).
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I245b17019b6d3c5e380c16cb3c9f4edc4dd10cc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iddf0727a538f2063cfabbec1f900c488331f33c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib0d1be34775c5eacf6cd9b0ec400bd42a93c59e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia9bc235c257abce2a3cd63cfd1b17ac356267d8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic3fbf307bfa42bd377c8f23c1837a6d15cb378e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80d9038d1f41d65201d6bfdb808708f997d71faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic97d48633ef1f246c181046ec32ab81614ba5ceb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I78734f685672347b06783f834643347a35c59e79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e051b21ca55d25c6fc6cfb529078b18adaab2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62028
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0c72a5c5306d63c5fce24bf727704d212d0ad0f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table
(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table.
This patch ensures USB _PLD group numbers are appear in order.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9cef57bbaf3e3519b7f6a7e3d86979722b598ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Guybrush platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
With this change in place it is important to use correct kernel version
which has I2C-amdpsp driver [1] enabled. Otherwise, we won't have I2C3
available and thus TPM device available in OS, what may end up as a
serious error - guybrush refuses to boot without access to TPM.
BUG=b:204508404
BRANCH=guybrush
TEST=Build proper kernel and firmware. Run on guybrush and verify TPM
functionality.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I9dd94e47e1a02e790427b67adff84de3eb3ee387
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61965
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP. An example of
implementation within Linux kernel is available [1].
There is a need to introduce new ACPI_ID ("AMDI0019") so that dedicated
driver on OS side can bind to it and handle this special setup. Since
PSP takes care of I2C controller power management, we need to remove
PowerResource object from DSDT.
BUG=b:204508404
BRANCH=guybrush
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Iccfc09d8c580d7ab2acb69d26b9c293cf625fb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61863
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chausie EC blob into CBFS at specified location
Change-Id: I48de08a18054efbda655e1563a539ff2ba7a38a6
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Qualcomm CRD devices do not have a fingerprint sensor so removing the
QUP configuration for it. This QUP also coincidentally is the same as
the one used for the TPM, so this initially was also causing TPM
communication issues during bootup as the QUP was being reconfigured
during the later stages after QcLib execution.
BUG=b:206581077
BRANCH=None
TEST=Boot to kernel without any CR50 communication errors
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I8d13b67796b70b0b7e9a4721cca0b8a54b2b27c1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61716
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL supports 8B Bank Architecture, whereas Sabrina supports either BG or
16B Bank Architectures depending on the speed. This influences SDRAM
Density and Banks, SDRAM Addressing bytes in SPD. Encode them as per the
individual SoC advisories.
BUG=b:211510456
TEST=Generate SPDs for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic854ccccb2b301e75d0f28cd36daf87fd41e07e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
ADL and Sabrina provide different advisories to encode Optional SDRAM
features (byte indices 7 & 9). Encode those bytes as per the respective
advisories.
BUG=b:211510456
TEST=Generate the SPD binaries for Sabrina.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Icac8ae148458162768a919d9690d7bf96734e6c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add wifi sar for vell
BUG=b:218992598
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Change-Id: I74fddd1dbcb7019fd5fe394da291f125f0d4960f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch corrects the DQ mapping and enable ECT. In Vell design,
the DQS is swapped in Mc0.ch1, Mc0.ch3, Mc1.ch0, Mc1.ch1 and Mc1.ch2
but the DQ mappings are not swapped and that causes ECT training
failure.
BUT=b:208719081
TEST=emerge-brya coreboot chromeos-bootimage && ensure the system
passes ECT training and all the way booting to the OS.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Idd2ad16151f0b2b93b00295b75a66ba65cba23cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Spaces before tabs are not allowed.
Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Spaces before tabs are not allowed.
Change-Id: I1aa8490cb81a77f48d69c16c175eb4fec70dc0db
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62054
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake has CNVI device. Select SOC_INTEL_COMMON_BLOCK_CNVI
for Alder Lake.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I6bf2292e870c990deb63fbf6e841ae7c5c63b3a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Spaces before tabs are not allowed.
Change-Id: I2732c01fd87c56227d47a4c0104de8e227b0cc34
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62018
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The and-mask passed to the gpio_update32 call needs all 32 bits to be
set to ones. When building as 32 bit binary the -1UL will result in the
needed bit mask, but for a 64 bit build the constant would have 64 bits
set to ones which then gets truncated to 32 bits causing a compiler
error. Use 0xffffffff as bit mask instead which behaves correctly in
both cases and also clarifies what this is doing.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b6a50bd914fdbb7a78885efb6c610715e2d26c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62053
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a build failure when trying to build the code in 64 bit mode.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8fe7b626d9d72c0b8ed07ced93e46f795e36848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I73dc695afb7aa2b32aa966070eb057c828073d47
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=None
Change-Id: Ia73460d335e859644511b7e9ca80111a919baf2c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
We only allow index = {0, 1}. Fix the check.
BUG=b:215599230
TEST=Build guybrush
BRANCH=guybrush
Found-by: Coverity CID 1469611
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I59615ab39faeded43b3803b4450c84ab8a8b81ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61988
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not seem to work with 'fall through' in comments.
Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0487698290992162fac6bb74b5082901415e917e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The google/agah variant will use a peripheral that will require the use
of the PCIe Resizable BAR feature from the PCIe spec. Thus, select
the new Kconfig option to enable it. The appropriate Resizable BAR size
will be updated later.
BUG=b:214443809
TEST=build
Change-Id: I9cf86ba3160ae5018655b5d366e89f4273b30b94
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can
indicates support for "Resizable BARs" via a PCIe extended capability.
When support this capability is indicated by the device, the size of
each BAR is determined in a different way than the normal "moving
bits" method. Instead, a pair of capability and control registers is
allocated in config space for each BAR, which can be used to both
indicate the different sizes the device is capable of supporting for
the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and
to also inform the device of the size that the allocator actually
reserved for the MMIO range.
This patch adds a Kconfig for a mainboard to select if it knows that it
will have a device that requires this support during PCI enumeration.
If so, there is a corresponding Kconfig to indicate the maximum number
of bits of address space to hand out to devices this way (again, limited
by what devices can support and each individual system may want to
support, but just like above, this number can range from 20 to 63) If
the device can support more bits than this Kconfig, the resource request
is truncated to the number indicated by this Kconfig.
BUG=b:214443809
TEST=compile (device with this capability not available yet),
also verify that no changes are seen in resource allocation for
google/brya0 before and after this change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I14fcbe0ef09fdc7f6061bcf7439d1160d3bc4abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The headers added are generated as per Alder Lake N FSP v2503_00.
Previous FSP version was v2503_00.
Change include: Add following Emmc UPDs in Fsps.h
- ScsEmmcEnabled
- ScsEmmcHs400Enabled
- EmmcUseCustomDlls
- EmmcTxCmdDelayRegValue
- EmmcTxDataDelay1RegValue
- EmmcTxDataDelay2RegValue
- EmmcRxCmdDataDelay1RegValue
- EmmcRxCmdDataDelay2RegValue
- EmmcRxStrobeDelayRegValue
BUG=b:213828776
BRANCH=None
Change-Id: I617673a0cb12e7165f2f63cce73fff38bc7bf827
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change to use i2c/generic to match ELAN FW update script.
BUG=b:210970640
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: Ib416da6000d9e99f9c37cf497fb1c43e3fca0220
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add PSP command to send SPL fuse command if PSP indicates SPL fusing
is required. Also add Kconfig option to enable sending message.
BUG=b:180701885
TEST=On a platform that supports SPL fusing. Build an image with an SPL
table indicating fusing is required, confirm that PSP indicates fusing
required and coreboot sends the appropriate command. A message indicating
PSP requested fusing will appear in the log: "PSP: Fuse SPL requested"
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Change-Id: If0575356a7c6172e2e0f2eaf9d1a6706468fe92d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
|
|
Add an option to build skiboot as a payload. This makes QEMU Power9
board simpler to use as skiboot is necessary anyway.
Change-Id: I0b49ea7464c97cc2ff0d5030629deed549851372
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Alder Lake M/N ESPI ID 18 was incorrectly assigned to be 0x5482. Assign
it to the correct value.
Reference documents: 619501, 645548.
Change-Id: I08bd218fd128497825b96aa5b9496826afa620d2
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61947
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow latest schematic to update the DQ map.
BUG=b:218939997
TEST=boot into OS without issue.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If29cc22b1749fb5d602d3ce64bcc1182593d673f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
To get verbose MRC log includes RMT log, we need to set
FSP_LOG_LEVEL_ERR_WARN_INFO instead.
TEST=tested on gimble, see MRC verbose and RMT log are printed
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Change-Id: I3896f0482dfde090b4e087490b7937683b5de091
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Disconnect all GPIO's that aren't connected to anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2050da62f73c0f99fbfef013c22e35225cc480c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add comment for each GPIO details its endpoint based
on the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3678274dcd52285019fb3cf8ccd22617268ce1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
* Change TGL Q Event for Keyboard Backlight to Q4A
* Change enabled value to 0xdd
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibae95e458f14b9d03ff50cb6222b336fd015d0e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Currently, the settings from CMOS were written to the
EC, which was pointless.
Now, when suspending, the EC values are stored in CMOS
when suspending and subsequently restored when waking.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I998d5509cd5e95736468f88663a1423217cf6ddf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Clean up formatting using shfmt
Change-Id: I46ce84668bfb4ea3df179317e2848b6bb75d8d5c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
HECI stuff is in the southbridge, so put the code in there. Rename the
file to match the name of the function it provides.
Change-Id: I71de1234547dbd46a9b4959c619d2ae194da620a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove all northbridge dependencies in the `setup_heci_uma()` function.
Update its signature to not pull in raminit internals and drop a dummy
read that doesn't have any side-effects (it's probably a leftover from
a replay of vendor firmware). This code will be moved into southbridge
scope in a follow-up.
Change-Id: Ie5b5c5f374e19512c5568ee8a292a82e146e67ad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove the temporary `raminit_heci.c` include and make it a proper
compilation unit. Export the `setup_heci_uma()` function.
Change-Id: Ia6782a0cb5e731d58764d0fa4ee256bfc8cef98a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move HECI code out of raminit.c into a separate raminit_heci.c file. To
preserve reproducibility, use a temporary .c include. This will be gone
in a follow-up.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I240552c9628f613fcfa8d2dd09b8e59c87df6019
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Commit 0e688b113d7fd98dfdb69cd0a407c8efcd968456 (arch/x86/id.S: Fix
building with clang) broke building with GCC 8.3 so this approach
should work for both GCC 8.3 and clang. The clang error is:
CC bootblock/arch/x86/id.o
/tmp/id-35b17a.s:35:7: error: expected relocatable expression
.long - ver
^
/tmp/id-35b17a.s:36:7: error: expected relocatable expression
.long - vendor
^
/tmp/id-35b17a.s:37:7: error: expected relocatable expression
.long - part
^
Change-Id: Ide3d313800641d4d9b5f79127f84d9fdb4ec2b96
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This reverts commit 0e688b113d7fd98dfdb69cd0a407c8efcd968456.
Reason for revert: Breaks building with GCC 8.3 which is currently
needed to build bootable coreboot images for Ironlake boards:
src/arch/x86/id.S: Assembler messages:
src/arch/x86/id.S:14: Error: value of 4294967344 too large for field of 4 bytes at 48
src/arch/x86/id.S:15: Error: value of 4294967327 too large for field of 4 bytes at 52
src/arch/x86/id.S:16: Error: value of 4294967318 too large for field of 4 bytes at 56
Change-Id: I9e13b15c062bc6598717382b1fedfa120c6d7209
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The SPI ROM REQ/GNT pins are used in systems where the EC and the APU
share one flash chip to make sure that not both devices will try to
access the flash at the same time. The firmware running before the x86
cores are released from reset has likely already done this, but do it
again in bootblock just to be sure. The KBRST_L pin can be used to reset
the APU from the EC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5af285ac222ed6625f498d82360f2d1cc522df2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idece950bab260a099c9790485805cbe8ea641666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cb9bbb3d7fd5d7c9e33fbf656301c0beb2f1b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change is mostly from CB:56644 patchset 3.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idcee9de9bc409a4dfe7d2f8c18ec5132f2747c33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add PCI IDs for Tiger Lake LP and Tiger Lake H devices and their GPIO
tables.
TEST: dump GPIOs on i5-1135G7, Tiger Lake H untested
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6071a999be9e8a372997db0369218f297e579d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1]
moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig,
but in doing so inadvertently disabled HECI1 for Puff-based boards which
previously had HECI1 enabled by default. To correct this, move the Kconfig
selection back into the mainboard Kconfig, and set defaults to match values
prior to refactoring in 805956bce.
Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and
ensure Disable HECI1 option defaults to selected for all except Puff.
Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Commit d6dbd933 [soc/intel/cannonlake: Use SBI msg to disable HECI1]
switched CNL-based mainboards from using FSP for HECI disablement to SBI
msg, but this causes google/hatch to hang when attempting to unhide p2sb
as part of disabling HECI1 via SBI during SMM, so switch to using
PMC/IPC method. SOC_INTEL_WHISKEYLAKE and SOC_INTEL_COFFEELAKE do not
support PMC disablement method, so they remain using SBI.
Test: build/boot google/hatch, verify HECI1 disabled via console log and
lspci in booted OS.
Change-Id: I06f0eb312b579af4a0fe826403374dcd99689d21
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move cse_disable_mei_devices() from cse_eop.c into heci_disable.c,
so that platforms needing to use heci1_disable_using_pmc() can do so
without requiring cse_eop.c be unnecessarily compiled in as well.
This will allow Cannon Lake platforms to use PMC to disable HECI1 instead
of SBI, which is currently causing a hang on google/hatch (and will be
changed in a follow-on patch).
Test: build test google/{ampton,drobit,eve,akemi} boards to ensure no breakage.
Change-Id: Iee6aff570aa4465ced6ffe2968412bcbb5ff3a8d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This change adds LTE power off sequence for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=FW_NAME=beadrix emerge-dedede coreboot
Change-Id: I11370bf69438465d2230e2633044ba42685a152b
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61329
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The address space allotted to MCRS in the northbridge needs to be exclusive
of the address space allotted to the GPIO controllers in the southbridge,
otherwise Windows complains of overlapping resource ranges and disables
the GPIO controllers. To prevent overlap, use CONFIG_PCR_BASE_ADDRESS
to set the upper bound of MCRS rather than MMCONF.
Test: boot Windows 10/11 on google/{reef,ampton} and verify that
GPIO controllers are indicated as without fault in Device Manager.
Change-Id: I2117054edb448e717b7cbe80958c9c4e6c996e2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
|
|
This patch creates a global function `cse_send_end_of_post()` so
that IA common code may get access to this function for sending EOP
command to the HECI1/CSE device.
Additionally, use static variable to track and prevent sending EOP
command more than once in boot flow.
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I837c5723eca766d21b191b98e39eb52889498bfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware.
Additionally, move the PMCON status bit clear operation to `.final` ops
to cover any such chances where FSP-S Notify Phase or any other later
boot stage may request a global reset and PMCON status bit remains set.
BUG=b:211954778
TEST=Able to build brya with these changes.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I22650f539a1646f93f2c6494cbf54b8ca785d6ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I982f669b13f25d1d0e6dfaec2fbf50d3200f74fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
Additionally, move the PMCON status bit clear operation to finalize.c
to cover any such chances where FSP-S NotifyPhase requested a global
reset and PMCON status bit remains set.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie786e6ba2daf88accb5d70be33de0abe593f8c53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Chromebook needs to do some additional check, which is not
available in the AMD's PI released SPL table.
BUG=b:216096562
Change-Id: Ib8074641b9fc9b38239a6e3837b8569e14af3342
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
According to the Datasheet Volume 1 (doc #636112, [1]) the PCR port ID
for eSPI is 0x72 (see chapter 25.2.2). Fix it in the header file.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/636112?explicitVersion=true
Test=Read and modify PCR registers of eSPI controller.
Change-Id: I5b07ef0f3a285f981791b1f4b4cdbda98ccf05ad
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61841
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id b8e3eaf:
2021-07-15 08:09:11 +0000 - (mainboard/starlabs: Add files for Star Labs laptops)
to commit id f14575c:
2022-02-14 21:14:23 +0800 - (mb/google/guybrush: Add SPL table)
This brings in 11 new commits.
2021-07-15 08:09:11 +0000 - (mainboard/starlabs: Add files for Star Labs laptops)
2021-07-22 15:52:42 +0800 - (soc/mediatek/mt8195: Update MCUPM firmware from v1.00.00 to v1.01.00)
2021-07-22 17:11:04 +0800 - (soc/mediatek/mt8195: Add dram.elf for full calibration flow)
2021-07-29 16:19:31 +0800 - (soc/mediatek/mt8195: Add dpm.pm and dpm.dm version 1.0)
2021-10-06 16:18:46 +0800 - (soc/mediatek/mt8195: Update MCUPM firmware from v1.01.00 to v1.02.00)
2021-11-16 12:01:22 +0800 - (soc/mediatek/mt8186: Add MT8186 basic files)
2021-12-24 17:25:31 +0800 - (soc/mediatek/mt8186: Add SPM firmware)
2021-12-24 17:25:33 +0800 - (soc/mediatek/mt8186: Add SSPM firmware)
2022-01-21 10:30:35 +0800 - (soc/mediatek/mt8186: List `sspm.bin` in README)
2022-01-24 16:48:56 +0800 - (soc/mediatek/mt8186: Add dram.elf version 0.1.0 for DRAM calibration)
2022-02-09 14:53:44 +0800 - (soc/mediatek/mt8195: Update dram.elf from 1.7.1 to 1.8.1)
2022-02-14 21:14:23 +0800 - (mb/google/guybrush: Add SPL table)
Change-Id: I0ced625982135c0cb7630cd0fb94cf78e3654673
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61935
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nereid does not support the LTE sub-board, so disable the LTE-related
GPIOs.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I6d6b5babeefb7c4b79adab5e756f37616c2338d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add an initial overridetree for nereid based on the pre-proto schematic
and build matrix.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7d313439337c84ab1024b3570cc7b57b4255af5d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Nereid P1 will also use Hynix H9JCNNNBK3MLYR-N6E. Add it to the parts
list and regenerate the memory IDs using part_id_gen.
BUG=b:217096008
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ibacb9dfb336967dd7fffe351d785cbbff9ba8b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Hynix H9JCNNNBK3MLYR-N6E will be used for nereid P1. Add it to the parts
list and regenerate the SPDs using spd_gen.
BUG=b:217096008
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I8775fe0551e0712507d42a778e04745a07270d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Create the kinox variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215049181
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_KINOX
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I68cac421f6299a5f82f2ab51633173648c993060
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61789
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
