summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-04drivers/intel/fsp2_0: FSP-T requires NO_CBFS_MCACHEArthur Heymans
When FSP-T is used, the first thing done in postcar is to call FSP-M to tear down CAR. This is done before cbmem is initialized, which means CBFS_MCACHE is not accessible, which results in FSP-M not being found, failing the boot. TESTED: ocp/deltalake boots again. Change-Id: Icb41b802c636d42b0ebeb3e3850551813accda91 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48282 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04src/soc/intel/alderlake: Enable the PCH HDAV Sowmya
This patch enables the PCH HDA device based on the devicetree configuration. Change-Id: I1791b769f4ab41cf89d82cf59049a2980c6c1eb0 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04MAINTAINERS: add maintainers for soc/amd/cezanne and soc/amd/commonFelix Held
Change-Id: Ib661fdf27d5cdb6c2b989c7f2acfc8a6e061657c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48239 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/supermicro/x11ssm-f: correct trigger for SMI/NMI interrupt inputsMichael Niewöhner
All four SMI/NMI interrupt inputs have an external pull-up resistor and get triggered by pulling the line low. Thus, correct the trigger to active-low. Also document the signals by adding appropriate comments. The pads' connections have been determined by dissecting a dead board. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Id1a8c1e0b9fe723a15d04a88d565a53eeba9b085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48093 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04mb/supermicro/x11ssm-f: drop NMI overridesMichael Niewöhner
Drop the NMI overrides, since NMI now gets configured in gpio common code. Also remove the variant init mechanism, which is unused now. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I02e0c679f9aafe33108320a8dfc62dcb278202ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/48092 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/{skl,cnl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so they can be configured for using NMI gpios. References: - CMP-LP: Intel doc# 615146-1.2 - CMP-H: Intel doc# 620855-002 - SPT-H: Intel doc# 332691-003 - SPT-LP: Intel doc# 334659-005 - CNP-H: Intel doc# 337868-002 Test: trigger NMI via gpio on Supermicro X11SSM-F did not work before but now makes the Linux kernel complain about a NMI. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4d57ae89423bdaacf84f0bb0282bbb1c9df94598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48091 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/common/block/gpio: add code for NMI enablingMichael Niewöhner
Especially server boards, like the Supermicro X11SSM-F, often have a NMI button and NMI functionality that can be triggered via IPMI. The purpose of this is to cause the OS to create a system crashdump from a hang system or for debugging. Add code for enabling NMI interrupts on GPIOs configured with PAD_CFG_GPI_NMI. The enabling mechanism is the same as SMI, so the SMI function was copied and adapted. The `pad_community` struct gained two variables for the registers. Also register the NMI for LINT1 in the MADT in accordance to ACPI spec. Test: Linux detects the NMI correctly in dmesg: [ 0.053734] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4fc1a35c99c6a28b20e08a80b97bb4b8624935c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04intel/common/block/gpio: only reset configured SMI instead of allMichael Niewöhner
Currently, when a SMI GPIO gets configured, the whole status register is get written back and thus, all SMIs get reset. Do it right and reset only the correspondig status bit of the GPIO to be configured. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Iecf789d3009011381835959cb1c166f703f1c0cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/48089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03mb/google/zork: Set S0IX_SLP_L high in S0, low in S3Martin Roth
This is used as a signal to show the system state. It hadn't been used up to this point as we're not currently using S0i3, but the fingerprint sensor will use it to go into a low power mode, so set it appropriately on Trembyle. Dalboz devices don't use the FPMCU, but set there as well so that the state matches. BUG=b:174695987 TEST=Verify GPIO state in S0 and S3 with the EC BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibc725905909830d44f77c2498a26edf6d7a3dc05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48255 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Vincent Palatin <vpalatin@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03spi/flashconsole: Fix internal buffer overflowNico Huber
Once the console's FMAP region is full, we stop clearing the line buffer and `line_offset` is not reset anymore. Hence, sanity check `line_offset` everytime before writing to the buffer. The issue resulted in boot hangs and potentially a brick if the log was very verbose. Change-Id: I36e9037d7baf8c1ed8b2d0c120bfffa58c089c95 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48074 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03mb/hp/z220_sff_workstation/Kconfig: Select MAINBOARD_USES_IFD_GBE_REGIONAo Zhong
Select MAINBOARD_USES_IFD_GBE_REGION to make CONFIG_HAVE_GBE_BIN (Add gigabit ethernet configuration) selection available. Without that onboard Ethernet won't work. Signed-off-by: Ao Zhong <hacc1225@gmail.com> Change-Id: I9fe138363fc47254285ebaa4a7dbe5b94a0a8784 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48007 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03soc/intel/skylake: Add chipset devicetreeFelix Singer
Set most of the devices to off to keep current behaviour. Change-Id: Ic4dbd965c84c3679e42a181dea0e7e618c12fb97 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-03cbfs: mcache: Fix end-of-cache checkJulius Werner
After the mcache is copied into CBMEM, it has *just* the right size to fit the final tag with no room to spare. That means the test to check if we walked over the end must be `current + sizeof(tag) <= end`, not `current + sizeof(tag) < end`. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I25a0d774fb3294bb4d15f31f432940bfccc84af0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-03cbfs: Add verification for RO CBFS metadata hashJulius Werner
This patch adds the first stage of the new CONFIG_CBFS_VERIFICATION feature. It's not useful to end-users in this stage so it cannot be selected in menuconfig (and should not be used other than for development) yet. With this patch coreboot can verify the metadata hash of the RO CBFS when it starts booting, but it does not verify individual files yet. Likewise, verifying RW CBFSes with vboot is not yet supported. Verification is bootstrapped from a "metadata hash anchor" structure that is embedded in the bootblock code and marked by a unique magic number. This anchor contains both the CBFS metadata hash and a separate hash for the FMAP which is required to find the primary CBFS. Both are verified on first use in the bootblock (and halt the system on failure). The CONFIG_TOCTOU_SAFETY option is also added for illustrative purposes to show some paths that need to be different when full protection against TOCTOU (time-of-check vs. time-of-use) attacks is desired. For normal verification it is sufficient to check the FMAP and the CBFS metadata hash only once in the bootblock -- for TOCTOU verification we do the same, but we need to be extra careful that we do not re-read the FMAP or any CBFS metadata in later stages. This is mostly achieved by depending on the CBFS metadata cache and FMAP cache features, but we allow for one edge case in case the RW CBFS metadata cache overflows (which may happen during an RW update and could otherwise no longer be fixed because mcache size is defined by RO code). This code is added to demonstrate design intent but won't really matter until RW CBFS verification can be supported. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I8930434de55eb938b042fdada9aa90218c0b5a34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-03x86: Put bootblock startup code into .text._start sectionJulius Werner
The initial bootblock assembly code on x86 is just put into the .text section, which just happens to come before all the individual .text.* function sections in the program.ld script. So it tends to be at the start of the image, but if you inserted another linker script section with contents before .text, it would cause a problem. (I'm not sure if it's an architectural requirement for _start16bit to come at the start of the image, but at least its 4K alignment requirement would waste a lot of space if it didn't.) This patch moves the section to .text._start which is the name other architectures use for the code they want in the very front of the image and which is listed first in program.ld. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia84e6e33ec29584d356e226e8fdcb8c9334d49af Reviewed-on: https://review.coreboot.org/c/coreboot/+/46834 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfstool: Hide hash printing behind -v and add to parseable outputJulius Werner
With the upcoming introduction of CBFS verification, a lot more CBFS files will have hashes. The current cbfstool default of always printing hash attributes when they exist will make cbfstool print very messy. Therefore, hide hash attribute output unless the user passed -v. It would also be useful to be able to get file attributes like hashes in machine parseable output. Unfortunately, our machine parseable format (-k) doesn't really seem designed to be extensible. To avoid breaking older parsers, this patch adds new attribute output behind -v (which hopefully no current users pass since it doesn't change anything for -k at the moment). With this patch cbfstool print -k -v may print an arbitrary amount of extra tokens behind the predefined ones on a file line. Tokens always begin with an identifying string (e.g. 'hash'), followed by extra fields that should be separated by colons. Multiple tokens are separated by the normal separator character (tab). cbfstool print -k -v may also print additional information that applies to the whole CBFS on separate lines. These lines will always begin with a '[' (which hopefully nobody would use as a CBFS filename character although we technically have no restrictions at the moment). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I9e16cda393fa0bc1d8734d4b699e30e2ae99a36d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-12-03cbfstool: Rename cbfs_walk() to cbfs_legacy_walk()Julius Werner
This function name clashes with cbfs_walk() in the new commonlib CBFS stack, so rename it to cbfs_legacy_walk(). While we could replace it with the new commonlib implementation, it still has support for certain features in the deprecated pre-FMAP CBFSes (such as non-standard header alignment), which are needed to handle old files but probably not something we'd want to burden the commonlib implementation with. So until we decide to deprecate support for those files from cbfstool as well, it seems easier to just keep the existing implementation here. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I37c7e7aa9a206372817d8d0b8f66d72bafb4f346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-12-03src: Remove redundant use of ACPI offset(0)Elyes HAOUAS
IASL version 20180927 and greater, detects Unnecessary/redundant uses of the Offset() operator within a Field Unit list. It then sends a remark "^ Unnecessary/redundant use of Offset" example: OperationRegion (OPR1, SystemMemory, 0x100, 0x100) Field (OPR1) { Offset (0), // Never needed FLD1, 32, Offset (4), // Redundant, offset is already 4 (bytes) FLD2, 8, Offset (64), // OK use of Offset. FLD3, 16, } We will have those remarks: dsdt.asl 14: Offset (0), Remark 2158 - ^ Unnecessary/redundant use of Offset operator dsdt.asl 16: Offset (4), Remark 2158 - ^ Unnecessary/redundant use of Offset operator Change-Id: I260a79ef77025b4befbccc21f5999f89d90c1154 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43283 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfstool: Use cbfs_serialized.h and standard vboot helpersJulius Werner
This patch reduces some code duplication in cbfstool by switching it to use the CBFS data structure definitions in commonlib rather than its own private copy. In addition, replace a few custom helpers related to hash algorithms with the official vboot APIs of the same purpose. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I22eae1bcd76d85fff17749617cfe4f1de55603f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02lib/trace: Remove TRACE supportKyösti Mälkki
Looks like the option is generally not compatible with garbage collections. Nothing gets inlined, for example is_smp_boot() no longer evaluates to constant false and thus the symbols from secondary.S would need to be present for the build to pass even if we set SMP=n. Also the addresses of relocatable ramstage are currently not normalised on the logs, so util/genprof would be unable dress those. Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02mb/google/brya: Add GPIO stubsEric Lai
Add stubbed out GPIO configuration and perform GPIO initialization during bootblock and ramstage. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia658ab4b466242cf8658abb239f19a9c0a03849a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-02mb/google/brya: Add entry stubs of each stageEric Lai
Add entry point stubs of each stage for Brya. More functionalities will be added later. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I44934c05ee32090b6e34648ee02f004c83e93d57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48063 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02mb/google/brya: Add flashmap descriptorEric Lai
BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia1ba8c997680c60ee1eabfae82459e127f664117 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48062 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02drivers/i2c/nct7802y: Move the sensor initialization procedureMaxim Polyakov
The current location for the sensor initialization procedure was chosen by mistake. Move this into a separate function in nct7802y.c . Change-Id: I093ae75db5f0051bff65375b0720c86642b9148a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-02cbfs: Port cbfs_load() and cbfs_map() to new APIJulius Werner
This patch adapts cbfs_load() and cbfs_map() to use the new CBFS API directly, rather than through cbfs_boot_locate(). For cbfs_load() this means that attribute metadata does not need to be read twice. Change-Id: I754cc34b1c1471129e15475aa0f1891e02439a02 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Move more stuff into cbfs_boot_lookup()Julius Werner
cbfs_boot_locate() is supposed to be deprecated eventually, after slowly migrating all APIs to bypass it. That means common features (like RO-fallback or measurement) need to be moved to the new cbfs_boot_lookup(). Also export the function externally. Since it is a low-level API and most code should use the higher-level loading or mapping functions instead, put it into a new <cbfs_private.h> to raise the mental barrier for using this API (this will make more sense once cbfs_boot_locate() is removed from <cbfs.h>). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4bc9b7cbc42a4211d806a3e3389abab7f589a25a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-12-02cbfs: Enable CBFS mcache on most chipsetsJulius Werner
This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Some older chipsets with insufficient SRAM/CAR space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-02soc/intel/common/cse: Perform cse_fw_sync on BS_PRE_DEVICE entryFurquan Shaikh
This change drops the special check added for TGL/JSL platforms and performs cse_fw_sync on BS_PRE_DEVICE entry. This was being done later in the boot process to ensure that the memory training parameters are written back to SPI flash before performing a reset for CSE RW jump. With the recent changes in CB:44196 ("mrc_cache: Update mrc_cache data in romstage"), MRC cache is updated right away in romstage. So, CSE RW jump can be performed in BS_PRE_DEVICE phase. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I947a40cd9776342d2067c9d5a366358917466d58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-02soc/amd: factor out common SMI/SCI enums and function prototypesFelix Held
At least a part or the remaining definitions in the soc-specific smi.h files are also common, but those have to be verified more closely. Change-Id: I5a3858e793331a8d2ec262371fa22abac044fd4a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02soc/amd/common/smbus: remove misleading definitionFelix Held
SMBHST_STAT_NOERROR was a redefinition of SMBHST_STAT_INTERRUPT that was used in smbus_wait_until_done. Remove the misleading bit definition that also didn't correspond with the register definitions and replace it with the definition of the actual bit that gets checked. Also add a comment that the code actually checks the IRQ status flag to see if the last command is already completed. Change-Id: I1a58fe0d58d3887dd2e83320e977a57e271685b3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02soc/amd: factor out fch_smbus_initFelix Held
Change-Id: I6df9323dc4e7ca99fd5368f0262e850c0aca5c54 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02soc/amd: factor out SMBUS controller registers into common headerFelix Held
The patch also rewrites the bit definition using shifts to make them easier to read. The older non-SoC chips can probably also use the new header file, but for this patch the scope is limited to soc/amd, since the older non-SoC chips don't use the SMBUS controller code in soc/amd/common. TEST=Timeless build for amd/mandolin and amd/gardenia doesn't change. Change-Id: Ifd5e7e64a41f1cb20cdc4d6ad1e675d7f2de352b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02soc/amd: factor out common AOAC device enable and status query functionsFelix Held
The code on Stoneyridge didn't set the FCH_AOAC_TARGET_DEVICE_STATE bits to FCH_AOAC_D0_INITIALIZED like the code for Picasso does, but that is the default value after reset for those bits on both platforms. Change-Id: I7cae23257ae54da73b713fe88aca5edfa4656754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02soc/amd: factor out common AOAC definitionsFelix Held
The register locations and bit definitions are the same for Stoneyridge and Picasso. Since not all devices are present on all SoCs, keep those numbers in the SoC-specific code. Change-Id: Ib882927e399031c376738e5a35793b3d7654b9cf Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02vc/amd/agesa/f.../Proc/Mem/Tech/DDR3: Support a custom memory profileMike Banon
The ability to set up a custom memory profile is useful if you don't like the XMP memory profiles (if they exist) of your RAM sticks, or want to try some overclocking. Read SPD data will be overriden by your custom values. Tested on Crucial BLT8G3D1869DT1TX0 (1866MHz 9-9-9-27). Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I1238ff00ef0efd11ea807794827476c30ac98065 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-12-02vc/amd/agesa/f.../Proc/Mem/Tech/DDR3: Support XMP memory profilesMike Banon
Add XMP memory profiles support that has been tested on f15tn (A88XM-E) and f16kb (AM1I-A) with two Crucial BLT8G3D1869DT1TX0, XMP 1 profile. Added using the datasheets from https://github.com/mikebdp2/ddr3spd : JEDEC_DDR3_SPD_4_01_02_11R24.pdf and Intel_XMP_Spec_Rev1.1.pdf Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I584416e3376afdf377a11783e55c5e9ff41e6b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/40488 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/skylake: Fix compilation under x86_64Patrick Rudolph
Change-Id: I37382ab06a8f1760e955d1ec76a6a00958b05999 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48177 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cpu/x86/smm/smm_stub: Fix stack canary on x86_64Patrick Rudolph
On x86_64 the cannary is 8 bytes in size, so write the additional 4 bytes to make SMM handler happy. Tested on Intel Skylake in long mode. No longer dies in SMM. Change-Id: Id805c65717ec22f413803c21928d070602522b2c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48215 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cpu/x86/smm/smm_stub: Fix GDT for x86_64Patrick Rudolph
The previous code was crashing when jumping back to ramstage, now it works. The GDT is now using the same values as the other ones in coreboot. Change-Id: Id00467d9d8a4138ddea73adbda4b39f12def583f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48214 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02mb/google/volteer: Add fw_config entries for boot deviceDuncan Laurie
Add the fw_config entries for the newly added boot device fields. These are added as separate fields since a board may have more than one selected. BUG=b:173129299 TEST=abuild google/volteer Change-Id: I2af9ffcf0b90d4f4b7f2f31613ee110d8f350454 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-02mb/google/volteer: Add additional SD cards to device listDuncan Laurie
The initial commit only focused on GL9755S and RTS5261, but there were recently other cards added to the fw_config and those also need to be added to the probe lists. BUG=b:173207454 TEST=abuild google/volteer Change-Id: Ic27074a016ffbd4c4dd86104a6d85437357c4b82 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-02soc/amd/picasso: add FSP binary locationFelix Held
Now that the initial version of the Picasso FSP binaries have finally landed, we can set the default paths to point to them now. Change-Id: Ib2241cc90c7113e0c3de4409e08b9ae1f4c2f51e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42472 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-023rdparty/amd_blobs: Update pointer for picasso SMU and FSPMarshall Dawson
Add the newest SMU firmware and FSP blobs for the picasso project. This supports Picasso, Dali, and Pollock devices. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I75e6f3d2a59ed8b2e42afba3a6978574373ec4e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-02mb/intel/adlrvp: Replace tab by white space in devicetreeMeera Ravindranath
Change-Id: I928b4528fa5b4c378a2e8ff7bb88547da1413df2 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48213 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02vendorcode/intel/fsp: Add Elkhart Lake FSP headers for FSP v2341Tan, Lean Sheng
The FSP-M/S/T related headers added are generated as per FSP v2341. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I98f738402490b47efa1a346f81db47857e384e13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-02soc/intel/elkhartlake: Update KconfigTan, Lean Sheng
Update Kconfig: 1. use FSP2.1 instead of 2.2 2. remove HECI_DISABLE_USING_SMM config 3. update CAR related stack & ram size 4. update FSP heap size 5. set IED region size = 0 as it is not used 6. update SMM TSEG size 7. update RP & I2C max device #s 8. update UART base address Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I6a44d357d71be706f402a6b2a4f2d4e7c0eeb4a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45078 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/skylake: Map VBIOS IDsPaul Menzel
The extracted VBIOS Option ROM ships the same ID for several generations, not matching the ID on the hardware resulting in a mismatch, and coreboot does not run the Option ROM. PCI ROM image, vendor ID 8086, device ID 0406, ID mismatch: vendor ID 8086, device ID 5916 Add the appropriate mappings. TEST=coreboot runs the ROM on the TUXEDO Book BU1406. Change-Id: Ia167d91627a7ff1b329ea75f150b3ce95c0acccb Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43853 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02mb/google/dedede/var/drawcia: Support VBT for DrawmanKarthikeyan Ramasubramanian
Default VBT supports only integrated Display port. Drawman supports a HDMI port and hence support a separate VBT for Drawman. BUG=b:161190931 BRANCH=dedede TEST=Build and boot to OS in Drawlat and Drawman. Cq-Depend: TBD Change-Id: I8895cc67d87428eddb31328f1e3a90c346b54533 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-12-02mb/google/dedede: Add Daughter-board FW_CONFIG in devicetreeKarthikeyan Ramasubramanian
Add daughter-board ports bit field and mask in devicetree. BUG=b:161190931 BRANCH=dedede TEST=Build and boot to OS in drawlat & drawman. Change-Id: Ibbd86fc8c3e44a7d1703b8ce75c48881226545c9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-12-02vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v2385_04Ronak Kanabar
The headers added are generated as per FSP v2385_04. Previous FSP version was 2385_02. Changes Include: - add FastPkgCRampDisable, SlowSlewRate, PreWake, RampUp and RampDown UPDs in Fsps.h BUG=b:174330941 BRANCH=dedede TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3438485 Change-Id: I477af05c34f767a43990670a711992641eaf6000 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47862 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02mb/google/zork: Update SPD table for ShubozKane Chen
Add memory table to "mem_parts_used.txt", and command to generate files: go build gen_part_id.go ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/shuboz/spd/ ../../../src/mainboard/google/zork/variants/shuboz/spd/mem_parts_used.txt Shuboz memory table as follow: value Vendor Part number 0x00 MICRON MT40A512M16TB-062E:J 0x01 HYNIX H5AN8G6NCJR-XNC 0x02 MICRON MT40A1G16KD-062E:E 0x03 SAMSUNG K4AAG165WA-BCWE BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I5f5f875daab58343f1cc8a9327ea128ba5e1f050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-12-02mb/google/dedede/var/lantis: Configure IRQs as level triggered for HID over I2CTony Huang
Config HID-I2C device to level trigger. As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:171546871 TEST=emerge-dedede coreboot Change-Id: If8be25f591715765a99920b79482c862b1cc7079 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-02arch/x86/car.ld: Check for out of bound on no-XIP stagesArthur Heymans
Check that stages running in CAR have their start and end in CAR. Change-Id: I292aacce564c23d9ae21aa46c5e2f8784fa6a609 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-02edist-test: Fix _Static_assert missing message stringDaniel Gröber
Older GCCs don't support _Static_assert without a message string as the second argument. AFAICT _Static_assert with two arguments is in C11 but omitting the message argument is an extension. The tests appear to be built with the system gcc rather than our crossgcc so that's probably why this was not cought by CI. Change-Id: I41fd0ffc42ded8b6d145c3ec30cc7407a78b9a43 Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-12-02src/acpi/acpigen: Add NULL pointer checkRonak Kanabar
Add NULL pointer check in acpigen_emit_namestring to avoid segmentation fault. Change-Id: I3d01d28e74f202278b5a5a96d2edd45c66f10883 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48148 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/amd/stoneyridge: align AOAC code with PicassoFelix Held
In commit 09d50671e6b43c23853a91ff4d6fb26c1e7e17a1 the AOAC code was reworked for Picasso and this patch ports this back to Stoneyridge to facilitate factoring out the functionality into common code. Change-Id: I836b91dc647987d064170fff7c8ca6ef2ee49211 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-01soc/amd/picasso/aoac: make aoac_devs array unsignedFelix Held
The numbers in the array are unsigned, so use an unsigned type there. Change-Id: I9a85594de0e4c53db965ab84239f19eb46432348 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-01soc/amd/picasso/aoac: fix typo in commentFelix Held
The power_off_aoac_device function clears the FCH_AOAC_PWR_ON_DEV bit, so the comment should be that it powers off the devices. Change-Id: Ia5e5d80b1977c3f53fcd9cf6d48bdb59045dfc3c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-01soc/intel/common/block/smm/smihandler: Fix compilation under x86_64Patrick Rudolph
Change-Id: Ie44ded11a6a9ddd2a1163d2f57dad6935e1ea167 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01soc/intel/common/block/cpu/car/exit_car: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ieac4a4924ff4684b2a419471cd54e3d3b1f5bbe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48171 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/cpu/car/cache_as_ram: Add x86_64 supportPatrick Rudolph
Doesn't affect x86_32. Tested on Intel Skylake. Boots into bootblock and console is working. Change-Id: I1b36ca8816dab9d30754aadd230c136978e3b344 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48170 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01drivers/aspeed/common/ast: Fix compilation under x86_64Patrick Rudolph
Change-Id: I5fb6594ff83904df02083bcbea14b2d0b89cd9dd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01drivers/intel/fsp2_0/notify: Fix compilation under x86_64Patrick Rudolph
Change-Id: Id63b9b372bf23e80e25b7dbef09d1b8bfa9be069 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01soc/intel/common/block/systemagent: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ibc8dc1cf33f594284edb82d4730967e077739c3c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01lib/reg_script: Add cast to fix compilation on x86_64Patrick Rudolph
Change-Id: Ia713e7dbe8c75b764f7a4ef1a029e64fb2d321fb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01cpu/x86/early_reset: Mark assemblycode as 32bitPatrick Rudolph
Allows to compile the file under x86_64 without errors. The caller has to make sure to call the functions while in protected mode, which is usually the case in early bootblock. Change-Id: Ic6601e2af57e0acc6474fc3a4297e3d2281decd6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01cpu/intel/microcode: Mark assemblycode as 32bitPatrick Rudolph
Allows to compile the file under x86_64 without errors. The caller has to make sure to call the functions while in protected mode, which is usually the case in early bootblock. Change-Id: Ic6d98febb357226183c293c11ba7961f27fac40c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01mb/intel/jslrvp: Modify the flash layout for fsp debug buildV Sowmya
Current flash layout doesn't support the fsp debug builds since the FW_MAIN_A/B doesn't have enough space to hold the fsp debug binaries along with ME RW binaries. This patch reduces the SI_ALL size to 3.5MiB and increase the SI_BIOS to 12.5MiB to include both ME RW and FSP debug binaries. BRANCH=dedede TEST=Build and Boot jslrvp with fsp debug enabled coreboot. Cq-Depend: chrome-internal:3425366 Change-Id: I6f6354b0c80791f626c09dabafe33eefccedb9c2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-01mb/google/zork: Mark RW_MRC_CACHE as "Preserve"Martin Roth
AGESA checks to make sure that the firmware version reading the MRC cache is the same version that wrote it, so it doesn't need to be erased during a firmware update. BUG=b:173724014 TEST=Flash firmware to DUT, update firmware, check RW_MRC_CACHE was not erased BRANCH=Zork Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ice3d1d467c25366b7ef678cd6481d043f62644ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/47776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-01cpu/x86/sipi: Add x86_64 supportPatrick Rudolph
Enter long mode on secondary APs. Tested on Lenovo T410 with additional x86_64 patches. Tested on HP Z220 with additional x86_64 patches. Still boots on x86_32. Change-Id: I53eae082123d1a12cfa97ead1d87d84db4a334c0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-01mb/kontron/mal10: Use the system library for headersFelix Singer
Use the system library for header files instead of relative filesystem paths. Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I0b356d0188f104d7c49571ce5c8fe65e79589123 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-12-01mb/kontron/mal10/Kconfig: Reorder selects alphabeticallyFelix Singer
Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: Id78c478a1252099cd1aa42c62efd406e7e1c5ef8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-12-01MAINTAINERS: Add missing trailing slashesFelix Singer
Add missing trailing slashes so that Gerrit recognizes maintainers correctly. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I35fcaf41617247e2b86cd6ddd7ee1b319a695797 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48137 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01mb/ocp/deltalake: Update SMBIOS type 8 informationTim Chu
Update port connector information for Delta Lake. Tested=Execute "dmidecode -t 8" to check all the information of SMBIOS type 8 is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I880bb9a5a41077172423f78b56c19aadd93e001f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01ec/google/chromeec/acpi: Make OperationRegion brace alignSubrata Banik
Inject TAB to make OperationRegion closing brace align with opening brace. Change-Id: Idb9f23cf6a2c249fb1fd02f4a2ac314d4f7e180b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-01mb/intel/adlrvp: Remove unused EC_SYNC_IRQ GPIO on ADLRVPSubrata Banik
As per latest schematics GPP_A15 is not used for EC_SYNC_IRQ hence remove the unused GPIO. Wrong GPIO configuration is causing platform reboot issue on ADLRVP with Chrome SKU. Change-Id: I704cd722683258c80197d8872d3bdaafb7c923dc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-12-01mb/intel/adlrvp: Add ASL support for WFC annd UFCVarshit Pandya
1. Add 2 ports and 2 endpoints 2. Add support for OVTI5675 WFC Cam is on I2C5 and UFC is on I2C1 BUG=None BRANCH=None TEST=Build and Boot adlrvp board and able to capture image using camera. Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I6d2a4fdca99354d1b6977233c70ccd950c99d8a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47497 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01mb/intel/adlrvp: Configure Camera related GPIO as per schematicsVarshit Pandya
Configure RST and PWR_EN signals for both WFC and UFC Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Ie416da373756b1c73472b8572f87930965a3d6ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/47496 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01mb/intel/adlrvp: Update GPIO configuration as per schematicsVarshit Pandya
Configure I2C related GPIO as per ADL-P schematics. This is based on Revision 0.974 of schematics. Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I76e1207cb31bed10b6e9fbeb2456b6feec42f97e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-12-01mainboard/intel/adlrvp: Enable PCH PCIe device over x1 slotSubrata Banik
List of changes: 1. Enable Root Port 8 aka 0:0x1c:7 2. Assign free running clock for RP8 3. Apply W/A to get card detected on x1 slot - Drive OEB 7:GPP_A7 and OEB 6:GPP_E5 low TEST=Able to detect PCIe SD card over x1 slot localhost ~ # dmesg | grep mmc [ 3.643755] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA [ 3.825201] mmc0: new ultra high speed DDR50 SDHC card at address 17f8 [ 3.835452] mmcblk0: mmc0:17f8 SE16G 14.4 GiB [ 3.849158] mmcblk0: p1 Change-Id: Ibea37b8de4dd020ff0108ec90ea6f8bcfaa4fb17 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48080 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01mainboard/intel/adlrvp/spd: Update SPD for LP4x SKUSubrata Banik
List of changes in SPD: 1. SPD Revision (of JEDEC spec) 2. SDRAM Maximum Cycle Time (tCKAVGmax) (MTB) 3. MSB -> CAS Latencies Supported, First Byte 4. CAS Latencies Supported, Second Byte 5. CAS Latencies Supported, Third Byte 6. LSB -> CAS Latencies Supported, Fourth Byte 7. Minimum CAS Latency Time (tAAmin) 8. Fine Offset for SDRAM Maximum Cycle Time (tCKAVGmax) 9. Fine Offset for SDRAM Minimum Cycle Time (tCKAVGmin) 10.Cyclical Redundancy Code (0- 125 byte) TEST=Able to build and boot with updated SPD. Change-Id: Iae7f2693e87bffb2dfa20bd07b22f4a4768c56cb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-12-01mb/intel/adlrvp: Add support for LPDDR5Sridhar Siricilla
This patch adds LPDDR5 memory configuration parameters to FSP. TEST=Able to pass FSP-M MRC training on LPDDR5 RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I787bf97dd6c244bd3b0662e5bd061a2da80baa90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-12-01mb/intel/adlrvp: Refactor lpddr4_mem_config structureSubrata Banik
List of changes: 1. Initialize dq_map array in a single line 2. Make dqs_map array also in a single line TEST=Able to build and boot ADLRVP LP4 SKU. Change-Id: I64f2b38492934c8ede301f4b252c8700060ed4ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48077 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01Makefile.inc: Alloc .bss* sections for "struct" file typeYu-Ping Wu
When the global variable of a "struct" CBFS file is zero (for example, CB:47696), the binary will appear in the .bss* section in the ELF file (instead of .data). This results in an empty binary file added to CBFS, so that file size check will fail when reading it at runtime. BUG=b:173751635 TEST=emerge-asurada coreboot TEST=Check sdram-lpddr4x-KMDP6001DA-B425-4GB is non-empty in CBFS BRANCH=none Change-Id: Idfd17d10101a948de0eb0522a672afd5c2f83b04 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47903 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01util/mb/google/puff: remove HECI from overridetreePaul Fagerburg
The template for overridetree.cb includes HeciEnabled, which has been removed from the CNL config struct, so remove it from the overridetree. BUG=b:174360951 TEST=`new_variant_fulltest.sh puff` succeeds Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I87f67c53cc75d9ddd40b4960739180a95de6ecd6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-11-30mb/siemens/chili: Configure GPIOs in gpio.cFelix Singer
Get rid of variant_gpio_table() and configure GPIOs in gpio.c instead of passing data around. Change-Id: Ib158d6bdbcbceb3c1dc4f47fc7c3e098b9c7e5c4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47974 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/siemens/chili: Introduce include folder for header filesFelix Singer
Use include folder for header files allowing proper includes. Change-Id: I80066fb925b918d040062397e633c5d499a50dbe Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47973 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/kontron/bsl6: Configure GPIOs using mainboard_opsFelix Singer
Hook up the mainboard_ops driver and configure the GPIOs using .init, since mainboard_silicon_init_params() is meant for the configuration of the FSP, not the GPIOs. Change-Id: I6ab8d258c6f81c90d835cb8d07c6387d3de76d85 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47850 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/intel/skylake: Fix commentFelix Singer
mainboard_silicon_init_params() is *not* meant for configuring GPIOs. It should only be used to configure FSP options, which can not be configured elsewhere. Change-Id: Ia92d0d173af9c67600e93b473480967304772998 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48008 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30util/pgtblgen: Improve compatibilityPatrick Georgi
Fix build on Debian/jessie Change-Id: I987e7a03441b40ab06ccd54a21e38aac81a1c28d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-11-30soc/amd/picasso: remove PICASSO_LPC_IOMUX Kconfig option from SoCFelix Held
PICASSO_LPC_IOMUX was only used in the amd/mandolin board, but not in the corresponding SoC code, so remove it from the SoC's Kconfig and reanme it in the mainboard's Kconfig to MANDOLIN_LPC. Change-Id: I261e093d6c56be6073a816b79c60d3a0457616f8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-30soc/amd/picasso: remove unused AMDFW_OUTSIDE_CBFS Kconfig optionFelix Held
The corresponding functionality in the SoC's Makefile.inc was removed in commit ef3395d990bbf1118a8d4e367a986bdbc92b1820 Change-Id: Iba84d9deb155ce314b3a3588781752b83a21486b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-30soc/amd: move bootblock inside main SoC directoriesFelix Held
There's no need to have the bootblock in its own sub-directory, so move it to each SoC's main directory to avoid clutter. This makes soc/amd more consistent with the coreboot code base in src/northbridge, src/southbridge and src/soc with the exception of src/soc/intel. Change-Id: I78a9ce1cd0d790250a66c82bb1d8aa6c3b4f7162 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47982 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30mb/google/volteer: Create drobit variantFrank Chu
Create the drobit variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:171947885 BRANCH=none TEST=emerge-volteer coreboot Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I63b7312bba236bd5af028359804d042f6850d8ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/47787 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/amd/common/vboot: use transfer_buffer_valid functionFelix Held
show_psp_transfer_info reimplemented the functionality of transfer_buffer_valid, so use replace that with a function call. Change-Id: Ie3d373b10bdb0ab00640dabeea12b13ec25406cc Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-11-30soc/amd: move vboot-on-PSP-related functions to common/vbootFelix Held
Change-Id: I4f07d3ab12116229a13d2e8c02b2deb06e51a1af Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-11-30soc/amd: move vboot bootblock functions to common folderFelix Held
Change-Id: I9e9fed26a686b8f90797687dd720902be48dae72 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-11-30soc/amd: move assembly part of non-CAR bootblock to common directoryFelix Held
There will be more files added to the common non-CAR Makefile.inc, so use an ifeq statement there. Change-Id: I1f71954d27fbf10725387a0e95bc57f5040024cc Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 09:21:58 +0000