summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-24Add Haswell Chromeboxes/Chromebase using variant board schemeMatt DeVillier
Combine existing board google/panther with new ChromeOS devices mccloud, monroe, tricky, and zako, using their common reference board (beltino) as a base. Chromium sources used: firmware-mccloud-5827.B 65bfee7 [haswell: No need pre-graphics delay...] firmware-monroe-4921.B 1ac749d [Monroe: Disable KB/MS in ITE8772.] firmware-tricky-5829.B 2db5322 [haswell: No need pre-graphics delay...] firmware-zako-5219.B eacedef [haswell: No need pre-graphics delay...] Existing google/panther board will be removed in a subsequent commit. Variant setup modeled after google/reef Change-Id: I5d7e0c2551e8b0707841032460c35615cefb2886 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17329 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-24Remove board google/pantherMatt DeVillier
Once #17329 is committed, no reason to have google/panther exist as a separate board anymore. Change-Id: I9a11273c39423d5ff33a7d1f91c8d8cffef97ec1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-11-24driver/pc80/tpm: Runtime generate ACPI table for TPM driverNaresh G Solanki
Runtime write acpi table for TPM driver. Change-Id: I70896e5874c24f17fca0c48b138ad4917b273f5b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17425 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-24arch/x86/acpigen: Write DSM method with multiple UUID'sNaresh G Solanki
Enable generic way of writing DSM method which can write acpi table for multiple UUID's. Change-Id: Ic1fbdc0647e8fdc50ffa407887feb19a63cb48e4 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17424 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-24x86 BIST: Declare function with inline in header fileKyösti Mälkki
Change-Id: Ieb5f1668a715ceadd5fe5ba0d121c865f1886038 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17572 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24soc/mediatek/mt8173/spi.c: Change assert to if statementMartin Roth
Asserts are only fatal if CONFIG_FATAL_ASSERTS is enabled in Kconfig. By default this is disabled, so the assert is generally just a printf. Die if someone decides to pass in an invalid bus number for some reason. Addresses coverity issue 1349858 - Out-of-bounds read Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I9d79bc336cbbfde31f655cfd271f101e7a90ab1b Reviewed-on: https://review.coreboot.org/17484 Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24nb/intel/i82810: Make sure DIMM size isn't negativeMartin Roth
If smbus_read_byte returned an error when reading the DIMM size, this value would be used as an offset into an array. Check for the error, and set the DIMM size to 0 if there's a problem. Addresses coverity issue 1229658 - Negative array index read Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I6461a0fae819dd9261adbb411c4bba07520d076d Reviewed-on: https://review.coreboot.org/17485 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24soc/samsung/exynos5420/uart.c: Init new serial struct variablesMartin Roth
The lb_serial structure had some new entries added, which were not being filled in. Fill in the values so they're not undefined. Addresses coverity error 1354778 - Uninitialized scalar variable Change-Id: Ia7ce07f6e4e058c91c2e063f3225497271ef93ff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17482 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24cpu/allwinner/a10/uart_console.c: Init new serial struct variablesMartin Roth
The lb_serial structure had some new entries added, which were not being filled in. Fill in the values so they're not undefined. Addresses coverity error 1354778 - Uninitialized scalar variable Change-Id: I57f024c35f79397d0e9fd0c800b1b0f4075caac1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17483 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-23northbridge/intel/i5000: Convert 'for(;;)' to 'die'Elyes HAOUAS
Change-Id: I1ceea759a40d740503bde725ad6d72fab4aa7971 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-23AGESA binaryPI: Fix PCI ID namespaceKyösti Mälkki
The defines of device IDs reflects the vendor namespace the ID has been allocated from. Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17510 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-23soc/intel/skylake: Define early smbus functionsNaresh G Solanki
Define early smbus functions that can be used by mainboard to fetch spd. Change-Id: Id170b2b8e6fb3ebb147f37bf433a27d1162dc11c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17433 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-23include/device/early_smbus.h: Declare smbus write functionNaresh G Solanki
Add declaration for smbus write. Early smbus access also needs smbus write function specially to read spd for DDR4 wherein page has to be switched by smbus write. Change-Id: I246cbdf0b52923f01dd036f63df17bf9af043c9f Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23google/pyro: Update DPTF settingsKevin Chiu
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU passive point:57, critical point:90 TSR1 passive point:55, critial point:70 TSR2 passive point:65, critial point:80 2. Update DPTF TRT Sample Period. CPU: 5s TSR0: 50s TSR1: 55s TSR2: 120s BUG=none BRANCH=master TEST=emerge-pyro coreboot Change-Id: Ib1b4b31a49d9396b1c5c9dd8d0b9b9998d01744f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17552 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23veyron_*: Remove obsolete ChromeboxesDavid Hendricks
This removes brain, danger, emile, and romy from the tree. This was cherry-picked from the chromeos-2016.02 branch (CL:345574), but conflicts showed up in many files that were to be deleted anyway possibly due to some widespread refactoring that was done between then and now. BUG=chromium:612660 BRANCH=none TEST=none Change-Id: Ie37140a9a4bb9d820a3fcbad6674b2fa737e1249 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1ebe5038a82162f6345e319de7578f26ccd68b73 Original-Change-Id: I11f7e0870916871d8f146a6871370ace76ddec49 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/412424 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17569 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-11-22via/k8t890: Compose a list of PCI IDsKyösti Mälkki
Change-Id: Ic474e17b70d64b63356a0ba7dd1649e5a6ff3a30 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17549 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-11-22src/vendorcode/amd/agesa: Fix castingŁukasz Dobrowolski
When IDSOPT_TRACING_ENABLED is TRUE build fails with "cast from pointer to integer of different size" Use "UINTN" as is done in Family 16h. Change-Id: I362e67fc83aa609155f959535f33be9c150c7636 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17406 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22soc/intel: Use correct terminology for SPI flash operationsFurquan Shaikh
FPR is an attribute of the SPI flash component and not of the SPI bus itself. Rename functions, file names and Kconfig option to make sure this is conveyed correctly. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I9f06f1a8ee28b8c56db64ddd6a19dd9179c54f50 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17560 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of max_transfer_size parameter in spi_slave structureFurquan Shaikh
max_transfer_size is a property of the SPI controller and not of the spi slave. Also, this is used only on one SoC currently. There is no need to handle this at the spi flash layer. This change moves the handling of max_transfer_size to SoC SPI driver and gets rid of the max_transfer_size parameter. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17463 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22mainboard/ms7721: Add MSI MS-7721 (FM2-A57MA-E35)Renze Nicolai
Adds support for the MSI MS-7721 (FM2-A75MA-E35) motherboard. Tested by building coreboot with: - VGA bios (needed for onboard video) - XHCI firmware - SeaBIOS payload CPU: AMD A8-6500 APU RAM: 2x 2GB Samsung M378B5673EH1 Confirmed booting using: - USB stick with Arch Linux (kernel 4.7.5) - Gentoo live CD from SATA dvd drive - Gentoo installation from SATA harddisk (kernel 4.4.26) Change-Id: I757e011de01ca9f340fd524b10e7fa3f291d53e3 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/17495 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-22mainboard/ms7721: Copy files from "asus/f2a85-m" to "msi/ms7721".Renze Nicolai
This patch adds a copy of the Asus F2A85-M code with only minimal changes. (to ensure that the code compiles) A second commit will be published to remove the copied code parts that don't apply to the MS-7221 and to make everything else actually work on the MS-7221 board. Change-Id: I1426c0876c7bfeb264231c0d338301133c721484 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/17494 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-22nb/intel/sandybridge/raminit: Do not log inside busy-wait loopKyösti Mälkki
Time spent in printk() is highly unpredictable, depending of the enabled consoles. If only CBMEM console is enabled, debugstring is repeated tens of times, consuming preram_cbmem_console storage. Change-Id: I2b0d9bd11c294d988a0eb84b90e77d5cc7f1f848 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17516 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22intel/sch: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Untested, only affected board is iwave/iwRainbowG6. Change-Id: Ie3c40ede85c9f89b54804dd2a411645be93911bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17528 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22intel FSP sandy/ivy: Move select MMCONF_SUPPORTKyösti Mälkki
Note: Platforms have no MMCONF_SUPPORT_DEFAULT. Change-Id: I8a02ea78957fca23b1cf161a00d5e3edda73d683 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17543 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22mb/gigabyte/ga-g41m-es2l: Add MAX_CPU = 4 in KconfigArthur Heymans
This motherboard support Intel core 2 quads. Before this change SeaBIOS was not usable, due to it crashing before it got to load anything. Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17537 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21mb/ga-g41m-es2l: Correctly configure PCI IRQ in ACPIArthur Heymans
Obtained from vendor bios DSDT, under "Device (HUB0), Name (_ADR, 0x001E0000)". The schematics also indicate that the INTA-D are hardwired to these PIRQ lines. Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17099 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21drivers/intel/fsp2_0: Check for NULL before using pointerMartin Roth
The cbmem routines pass back NULL on error. Check for this before using the pointer. Addresses coverity issue 1365731 - Dereference null return value Change-Id: I92995366ffb15afd0950b9a8bbb6fe16252b2c38 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17480 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21console/vtxprintf.c: cast precision to size_t for string lengthMartin Roth
If no maximum string length is specified, we're intentionally passing a value of -1 to get the string length so that it's not limited. This makes checking tools unhappy, so actively cast it to size_t before passing it into strlen to show that it's not an accident. Addresses coverity issue 1129133 - Argument cannot be negative Change-Id: I40f8f2101e170a5c96fcd39c217aa414f4316473 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17479 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21nb/intel: Fix some spelling mistakes in comments and stringsMartin Roth
Change-Id: I4a8297397d878e38516c8df19dd311c7ef19ec06 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17478 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21fsp2_0: implement stage cache for silicon initBrandon Breitenstein
Stage cache will save ~20ms on S3 resume for apollolake platforms. Implementing the cache in ramstage to save silicon init and reload it on resume. This patch adds passing S3 status to silicon init in order to verify that the wake is from S3 and not for some other reason. This patch also includes changes needed for quark and skylake platforms that require fsp 2.0. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for reef and tested boot and S3 resume path saving 20ms Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/17460 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21util/inteltool: Fix bay trail ahci deviceMarshall Dawson
Use a unique bus/device/function if a bay trail LPC bridge was found. TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP. Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17464 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-21util/amdfwtool: Wrap long lines, excluding commentsMartin Roth
Change-Id: I35c4340cf14ca1609ce3bfcac78cc4e286eff34a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17326 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-21util/amdfwtool: Fix whitespaceMartin Roth
Change-Id: I33e41b745e7ec55ed39d7125fc74b1619d28bb54 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17325 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-21smscsuperio: map interrupt in smscsuperio_enable_serial()Jonathan A. Kollasch
This is a stopgap for when you use SUPERIO_SMSC_SMSCSUPERIO and the interrupt is unmapped at reset, but for whatever reason the chip is inaccessible in smscsuperio/superio.c::enable_dev() and thus the devicetree.cb IRQ information is not applied in ramstage and then serial console output fails to work for more than the UART FIFO depth in the OS. Change-Id: I00998088975569516f7caeb7f4098b48fe437889 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: https://review.coreboot.org/10807 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-21intel/i82801gx: Reorder spaces in outputPaul Menzel
Currently, the coreboot log of a Lenovo X60, not having any IDE devices connected, there is a trailing whitespace in the output. […] PCI: 00:1f.1 init ... i82801gx_ide: initializing... PCI: 00:1f.1 init finished in 11 usecs […] Reorder the whitespaces, so they are added when needed. Change-Id: I640e514c89fe0246a847d1fd088def1c88e864f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/11870 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-21lenovo/x200/board_info.txt: Add SOIC-8 to ROM packageMichał Masłowski
Some X200 use a 4 MiB SOIC-8 flash chip. Change-Id: Ie5bd359ef08cf1be369a026be376c21555d0ea18 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: https://review.coreboot.org/8391 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-21AMD binaryPI: Drop commented code with bad PCI IDsKyösti Mälkki
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also the device IDs have not been defined. Change-Id: I3076cb08e3181e7f86de38deb18f1661f037bc38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17508 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AGESA: Drop commented code with bad PCI IDsKyösti Mälkki
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also the device IDs have not been defined. Change-Id: I0d85893169fe877e384746931605f563c50308b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17509 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AMD sb700: Fix PCI ID errorKyösti Mälkki
Broken since March 2010, looking for incorrect PCI VENDOR. Change-Id: I1960aa168e59364ad962f00c81b67b8bdc5773ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17514 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AMD sb600: Fix PCI ID errorKyösti Mälkki
Broken since February 2008, looking for incorrect PCI VENDOR. Change-Id: I6935683a8a7428ca9b2e90bcc0a090c3865ffd33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17513 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21net/r8167: do net set bus msater enableRonald G. Minnich
It's very dangerous to set bus master enable, and more so on a NIC, where random broadcast packets can end up in memory in unexpected ways. If your kernel has trouble with the fact that we do not set bus master enable, you need to fix your kernel. Change-Id: If07fde7961ad80125567240cb43db036346bef97 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17559 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins)
2016-11-21arch/x86: don't create new gdt in cbmem for relocatable ramstageAaron Durbin
When running with relocatable ramstage, the gdt loaded from c_start.S is already in CBMEM (high memory). Thus, there's no need to create a new copy of the gdt and reload. Change-Id: I2750d30119fee01baf4748d8001a672d18a13fb0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17504 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-21mb/siemens/sitemp_g1p1/cmos.layout: Re-add cmos_defaults_loadedNico Huber
I guess it was dropped because its concept was misunderstood. The idea is to always have it set to `Yes` in the cmos.default. Users can then ack the loading of the defaults by setting it to `No`. If the defaults ever get loaded again, they'll be notified by the default `Yes`. Change-Id: I1aa6d75bd5aa153c7b11a6b74564272eaa7cc523 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17355 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-21ec/roda/it8518: Add another embedded controllerDennis Wassenberg
The embedded-controller interface of Roda's Ivy Bridge notebooks is supposedly programmed by AMI. Change-Id: I153d831fcea8a3132c7bd1927ff3b445d9a8e92c Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17288 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-11-21drivers/usb: Add option for baudrate of FT232H UARTNico Huber
The maximum supported rate is 12MHz. Only tested with 4MHz though, since I couldn't set anything higher on my Linux receiver. But that works fine with another FT*232H as receiver, whoosh. Change-Id: Ie39aa0170882ff5b4512f0349f6f86d3f0b86421 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17477 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21device/dram/ddr3: Fix calculation CRC16 of SPDKyösti Mälkki
Fix regression with commit: 7dc4b84 device/dram/ddr3: Calculate CRC16 of SPD unique identifier Misplaced parenthesis causes CRC check failure, potentially rendering some platform unbootable. Change-Id: I9699ee2ead5b99c7f46f6f4682235aae3125cca6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17550 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-11-20riscv: map first 4GiB of physical address spaceRonald G. Minnich
o The first 4G of physical address space is now mapped at 0. o The first 4G of physical address space is now mapped at 1 << 38. o The first 2G of DRAM (2 - 4 GiB of physical address space) is now mapped at the top of memory save for the last 4K i.e. at 0xffffffff80000000, with SBI page at the very top. Of these, we hope to remove the *most* of the last one once the gcc toolchain can handle linking programs that can run at "top 33 bits of address not all ones (but bit 63 set)". The 4K mapping of the top of the 64 bit address space will always remain, however, for SBI calls. Change-Id: I77b151720001bddad5563b0f8e1279abcea056fa Reviewed-on: https://review.coreboot.org/17403 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
When MRC cache is available, first read only the SPD unique identifier bytes required to detect possible DIMM replacement. As this is 11 vs 256 bytes with slow SMBus operations, we save about 70ms for every installed DIMM on normal boot path. In the DIMM replacement case this adds some 10ms per installed DIMM as some SPD gets read twice, but we are on slow RAM training boot path anyways. Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-11-20intel sandy/ivy: Skip SPD loading on S3 resume pathKyösti Mälkki
For S3 resume path SPD is only used for DIMM replacement detection. As this detection already fails in the case of removal/insertion of same DIMM, we can rely on cbmem_recovery() failure alone to force system reset in case someone accidentally does DIMM replacements while system is suspend-to-ram stage. Skipping DIMM replacement detection allows skipping slow SPD loading, thus reducing S3 resume path time by 80ms for every installed DIMM. Change-Id: I4f2838c05f172d3cb351b027c9b8dd6543ab5944 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17490 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20intel sandy/ivy: Move SPD loading after TS_BEFORE_INITRAMKyösti Mälkki
Take the timestamp before SPD loading takes place, for easier comparison against MRC blob performance and followup changes will optimize some of the slow SPD/SMBus operations. Change-Id: I50b5a9d02d2caf4c63e1a4025544131a085b8fb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17489 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20intel sandy/ivy: Change CRC used to detect DIMM replacementKyösti Mälkki
Switch to use CRC of unique identifier section SPD[117..127], remaining area of SPD data is ignored. Change-Id: If4b43183f99f5f911ae6c311b43c29a72b9922e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17487 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-11-20device/dram/ddr3: Calculate CRC16 of SPD unique identifierKyösti Mälkki
Specification allows for the unique identifier bytes 117..125 to be excluded of CRC calculation. For such SPD, the CRC would not identify replacement between two identical DIMM parts, while memory training needs to be redone. Change-Id: I8e830018b15c344d9f72f921ab84893f633f7654 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17486 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20intel sandy/ivy: Increase XIP cache with USE_NATIVE_RAMINITKyösti Mälkki
Compiled romstage is over 64kiB and exceeded XIP_ROM_SIZE, so it was not entirely set WRPROT cacheable. Reduces first boot raminit (including training) time by 400ms. Change-Id: I5c4cbf581fc845150f207087c1527338ca364f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17488 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20mainboard/google/reef: Update DPTF parameters provided from thermal teamTim Chen
Update the DPTF parameters based on thermal test result. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU passive point:61 TSR0 passive point:120, critial point:125 TSR1 passive point:46, critial point:75 TSR2 passive point:100, critial point:125 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 3W, and max to 6W Set PL2 min to 8W 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 80secs Change CPU Effect on Temp Sensor 0 sample rate to 120secs The TRT of TCHG is TSR1, but real sensor is TSR2. Change Charger Effect on Temp Sensor 2 sample rate to 120secs Change CPU Effect on Temp Sensor 2 sample rate to 120secs BUG=chrome-os-partner:60038 BRANCH=master TEST=build and boot on electro dut Change-Id: I7a701812cb45f51828a3cbb3343e03817645110e Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17466 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20nb/intel/sandybridge/raminit: Fix disable_channelPatrick Rudolph
Also memset info.dimm as it contains decoded SPD timings used to calculate common timings. Tested manually on Lenovo T420. Change-Id: I659e5bc2a6cbadd9539931ee00ddea0a5253295f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17473 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-20nb/intel/sandybridge/raminit: Find CMD rate per channelPatrick Rudolph
No need to find the same CMD rate for all channels. Allow different CMD rates for every channel. Tested on Lenovo T420 with different modules on each channel. No regressions found. Change-Id: I7036275ae89335dd3549ec392fa64824355b3cbf Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17472 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-20nb/intel/sandybridge/raminit: Define registersPatrick Rudolph
Use register names found on forums.corsair.com. No functionality changed. Change-Id: Ibaede39a24e8df1c4d42cb27986ab66174b7d45b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17400 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-20nb/intel/sandybridge/raminit: Get rid of fallback attemptsPatrick Rudolph
Locking the PLL again once it's locked doesn't work. The MRC doesn't do this, for some reason. Remove fallback attempts of lowering DDR frequency. Change-Id: Iccb54fa7d7357a22182dd26bd5b49c4073c04dc9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17399 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-20nb/intel/sandybridge/raminit: Fix CAS Write LatencyPatrick Rudolph
As documented in DDR3 spec for MR2 the CWL is based on DDR frequency. There's no to little difference for most memory modules operating at DDR3-1333. It might fix problems for memory modules that operate at a higher frequency and memory modules with low CL values should work even better. Tested on Lenovo T420 with DDR3-1333 CL9 and DDR3-1600 CL11. No regressions found. Change-Id: Ib90b5de872a219cf80b4976b6dfae6bc02e298f4 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17389 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-20arch/x86 GDT: Fix orphan debug outputKyösti Mälkki
On S3 resume path, CBMEM_ID_GDT already exists but we only printed the final "ok" string. Always tell GDT is about to be moved. Change-Id: Ic91c5389cf4d47d28a6c54db152c18541c413bc1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-20intel car: Move pre-ram stack guard lowerKyösti Mälkki
SPD data alone consumes 0x400 of pre-ram stack, so the guard was initially set too high, printing spurious "smashed stack detected" messages at end of romstage. Use the same stack size as haswell. Change-Id: I24fff6228bc5207750a3c4bf8cf34e91cf35e716 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17501 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-19commonlib/include: remove NEED_VB20_INTERNALSAaron Durbin
vboot_handoff.c is the only place that needs the vb2 internals. Provide it in the one place it is actually required instead of pulling in the headers unnecessarily in common code. There is, however, still a need to get the vb2 hashing types for a function declaration. Change-Id: I038fda68b1cd05fa2e66135158e5e2d18567563a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17475 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-19soc/intel/common/lpss_i2c: correct bus speed errorAaron Durbin
The wrong value was used for reporting an error when a requested bus speed was made that isn't supported. Use the requested value. Change-Id: I6c92ede3d95590d95a42b40422bab88ea9ae72a1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17474 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-19soc/intel/common/lpss_i2c: fix NULL dereference in error pathAaron Durbin
If the SoC clock speed is not supported there is supposed to be an error printed. However, the value printed was wrong which was dereferencing a NULL struct. Fix that. Change-Id: I5021ad8c1581d1935b39875ffa3aa00b594c537a Found-by: Coverity Scan #1365977 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17468 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-18intel/sandybridge: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Also fixes console log from reporting early in ramstage "Normal boot" while on S3 resume path. Change-Id: I5b218ce3046493b92952e47610c41b07efa4d1de Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-18intel/sandybridge post-car: Redo MTRR settings and stack selectionKyösti Mälkki
Adapt implementation from haswell to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Also fixes regression of slower S3 resume path after commit 9b99152 intel/sandybridge: Use common ACPI S3 recovery Skipping low memory backup and using stage cache for ramstage decreases time spent on S3 resume path by 50 ms on samsung/lumpy. Change-Id: I2afee3662e73e8e629188258b2f4119e02d60305 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15790 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-18intel post-car: Increase stacktop alignmentKyösti Mälkki
Align top of stack to 8 bytes, value documented as FSP1.1 requirement. Also fix some cases of uintptr_t casted to unsigned long. Change-Id: I5bbd100eeb673417da205a2c2c3410fef1af61f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17461 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-18sb/lynxpoint: use hda_verb.c from VARIANT_DIR if applicableMatt DeVillier
Change-Id: Ie2d0cf573876694fe87edf2f6915a5cc26238940 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-18sio/it8772f: add GPIO blink definition needed by google/trickyMatt DeVillier
Change-Id: I597ba3a03bd42c64d03137b10a3758d86b129029 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17452 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-18Makefile.inc: export VARIANT_DIR as top-level variableMatt DeVillier
export VARIANT_DIR at the top level, rather than doing so multiple times at the SoC / board level Change-Id: If825701450c78289cb8cca731d589e12aafced11 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17451 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-18ec/lenovo/h8: Add USB Always OnNicola Corna
USB AO is the internal name for the dedicated charging port on ThinkPads when in S3 or lower. AOEN (bit 0) is internal name for enabling this feature while AOCF (bits 2 and 3) is the configuration field. According to Peter Stuge, AOCF can be configured in this way: 00 => AC S3 S4 S4 USB on, battery S3 USB on, battery S4 S5 off 11 => AC S3 S4 S4 USB on, battery S3 S4 S5 USB off 10, 01 => equivalent to 00 This commit also adds a new configuration field in the CMOS of the X220 and the X201 to activate this feature. It probably can be also added to all the ThinkPads that support this functionality. With this functionality USB devices are able to negotiate full power from the dedicated port (usually the yellow one) even in S3. Tested on a X201 and X220 with an Android smartphone: with this feature enabled it shows "Charging" when connected during S3, without it it shows "Charging slowly" (or it doesn't charge at all on the X201). For some reasons the "AC only" mode doesn't work, so it has been disabled. Change-Id: Ie1269a4357e2fbd608ad8b7b8262275914730f6e Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/17252 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-11-17rtc: Force negative edge on SET after battery replacementMarshall Dawson
After the RTC coin cell has been replaced, the Update Cycle Inhibit bit must see at least one low transition to ensure the RTC counts. The reset value for this bit is undefined. Examples have been observed where batteries are installed on a manufacturing line, the bit's state comes up low, but the RTC does not count. Change-Id: I05f61efdf941297fa9ec90136124b0c8fe0639c6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17rtc: Check update-in-progress bitMarshall Dawson
While the real-time clock updates its count, values may not be correctly read or written. On reads, ensure the UIP bit is clear which guarantees a minimum of 244 microseconds exists before the update begins. Writes already avoid the problem by disabling the RTC count via the SET bit. Change-Id: I39e34493113015d32582f1c280fafa9e97f43a40 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17369 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17arch/x86/acpigen: Implement acpigen functions to return integer & stringNaresh G Solanki
Add ACPI method to return integer & string. Change-Id: I2a668ccadecb71b71531e2eb53a52015fca96738 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17450 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17google/snappy: Update DPTF settingsWisley Chen
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU passive point:100, critical point:105 TSR1 passive point:48, critial point:65 TSR2 passive point:85, critial point:100 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 3W, and max to 6W Set PL2 min and max to 8W 3. Change thermal relationship table (TRT) setting. The TRT of TCHG is TSR1, but real sensor is TSR2. BRANCH=master BUG=none TEST= Compiled, verified by thermal team. Change-Id: Ib197c36eca88e3d05f632025cf3c238e1a2eae23 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17426 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
The following devices i2c6, i2c7, spi1, spi2, uart3 are not used. BUG=chrome-os-partner:59880 TEST=Boot to OS and lspci command should not list the above disabled devices. Change-Id: I819cdb34709703e6431b49446417ed9d6b3543cd Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/17441 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17mb/intel/kblrvp: Remove unused configs in KconfigNaresh G Solanki
Remove unused drivers & nhlt in Kconfig. Change-Id: Ic1e8a98a77a0061e749019665f955b921f85975e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17427 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
Provide the rise and fall times for the i2c buses and let the library perform the necessary calculations for the i2c controller registers instead of manually tuning the values. BUG=chrome-os-partner:58889,chrome-os-partner:59565 Change-Id: I0c84658471d90309cdbb850e3128ae01780633af Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17397 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-17google/gru: Move to one CA training patternDerek Basehore
This changes memory to only do CA training with one pattern, 0xfffff/0x00000 and to also make sure CA training waits for all of the captures during training. BRANCH=none BUG=chrome-os-partner:56940 TEST=boot kevin and run stressapptest -M 1500 -s 1000 Change-Id: I0982674b4f4415f4d7865923ced93fa09bdd877e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 75cdd911cea9c4e5744fd04505b260fa5755513c Original-Change-Id: I3b86e6d4662c6fbbf9ddef274fce191a367904e5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/410320 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/gru: Add new CA training patternDerek Basehore
This adds a new CA training pattern for all of the supported frequencies. This pattern increases the hold time on CA. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run: while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: Ie5958cf67c16247ef90ee261da9faef4ffa5b339 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8babeafe75bffcb2dab17eb007b4f5bb0eb42606 Original-Change-Id: I7f7652f88e43dc9b2f6069e60514931bf7582ed1 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/403547 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17382 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/oak: Add more DRAM modules supportPH Hsu
Add support for following 3 modules. - Micro MT52L256M32D1PF / MT52L512M32D2PF - Hynix H9CCNNNBJTALAR Hana EVT was planed to add 4 DRAM modules but RAM_CODE=5 is not used in the end. This patch also unifies the naming of the RAM configurations. BUG=chrome-os-partner:58983 TEST=verified on Hana EVT. Change-Id: I7dd44525de8e9dde01f210f4730fa8ccd4baef21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5dccd68149bcfd6fd0a83e310d43063bab645691 Original-Change-Id: I7c245c8c24be159e152f4f3cca25bf970b58425c Original-Signed-off-by: Milton Chiang <milton.chiang@mediatek.com> Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/402888 Original-Reviewed-by: Pin-Huan Hsu <ph.hsu@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Paris Yeh <pyeh@chromium.org> Reviewed-on: https://review.coreboot.org/17381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17arm64: arm_tf: Do not build raw bl31.bin binaryJulius Werner
coreboot's build system picks up the BL31 image as an ELF from the ARM Trusted Firmware submodule and inserts it into CBFS. However, the generic 'bl31' build target we run in the ARM Trusted Firmware build system also generates a raw bl31.bin binary file. We don't need that binary, and with the recently added support for multiple non-contiguous program segments in BL31 it can grow close to 4GB in size (by having one section mapped near the start and one near the end of the address space). To avoid clogging up people's hard drives with 4GB of zeroes, let's only build the target we actually need. BRANCH=gru BUG=chrome-os-partner:56314,chromium:661124 TEST=FEATURES=noclean emerge-kevin coreboot, confirm that there's no giant build/3rdparty/arm-trusted-firmware/bl31.bin file left in the build artifacts, and that we still generate .d prerequisite files. Change-Id: I8e7bd50632f7831cc7b8bec69025822aec5bad27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 31699820f4c36fd441a3e7271871af4e1474129f Original-Change-Id: Iaa073ec11dabed7265620d370fcd01ea8c0c2056 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/407110 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17380 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17rockchip/rk3399: Change 933 DPLL to low jitter rateDerek Basehore
This changes the 933 DPLL rate to 928 which has low jitter. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: I4d2a8871aaabe3b0a1a165c788af265c5f9e892c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 54ebf8763bb8193c4b36a5e86f0c625b176d31a6 Original-Change-Id: Iaa12bf67527b6d0e809657c513b8d1c66af25174 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/404550 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17379 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17rockchip/rk3399: Change PLL configuration to match Linux kernelJulius Werner
The Kevin project has been too smooth and boring for our tastes in the last last few weeks, so we've decided to stir the pot a little bit and reshuffle all our PLL settings at the last minute. The new settings match exactly what the Linux kernel expects on boot, so it doesn't need to reinitialize anything and risk a glitch. Naturally, changing PLL rates will affect child clocks, so this patch changes vop_aclk (192MHz -> 200MHz, 400MHz in the kernel), pmu_pclk (99MHz -> 96.57MHz) and i2c0_src (198MHz -> 338MHz, leading to an effective I2C0 change 399193Hz -> 398584Hz). BRANCH=gru BUG=chrome-os-partner:59139 TEST=Booted Kevin, sanity checking display and beep. Instrumented rockchip_rk3399_pll_set_params() in the kernel and confirmed that GPLL, PPLL and CPLL do not get reinitialized anymore (with additional kernel patch to ignore frac divider when it's not used). Also confirmed that /sys/kernel/debug/clk_summary now shows pclk_pmu_src 96571429 because the kernel doesn't even bother to reinitialize the divisor. Change-Id: Ib44d872a7b7f177fb2e60ccc6992f888835365eb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9b82056037be5a5aebf146784ffb246780013c96 Original-Change-Id: Ie112104035b01166217a8c5b5586972b4d7ca6ec Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/405785 Original-Commit-Ready: Xing Zheng <zhengxing@rock-chips.com> Original-Tested-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17378 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17crossgcc/buildgcc: Add package version to saved .success fileMartin Roth
Previously, the .success file for each target didn't save the version, of the package that was built. This created problems when someone wanted to update to a new version and could not rebuild. Change-Id: I9975b198ac4a7de8ff9323502e1cbd0379a1dbb8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17417 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17soc/broadcom/cygnus: Update DDR KconfigMartin Roth
The DDR speed Kconfig symbols needed to either be added to the Kconfig tree, or have the code associated with them removed. I chose to add the symbols. - Add symbols for DDR333 - DDR667 to cygnus Kconfig. These should be selected by the mainboard. - Rename symbols from DDRXXX to CYGNUS_DDRXXX to match the existing CYGNUS_DDR800 symbol. - Rename the non Kconfig #define CONFIG_DRAM_FREQ to CYGNUS_DRAM_FREQ because having other #defines look like Kconfig symbols is confusing. - Change #ifdef CONFIG_DDRXXX to use IS_ENABLED Change-Id: I3f5957a595072434c21af0002d57ac49b48b1e43 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2016-11-17soc/intel/apollolake: Enable and Lock AES feature registerNelson, Cole
Configure MPinit feature register during boot and s3 resume. Enable and Lock Advanced Encryption Standard (AES-NI) feature. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: Id16f62ec4e7463a466c43d67f2b03e07e324fa93 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17396 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17sio/ite/common: Add generic environment-controller driverNico Huber
The environment-controller entity is shared by many ITE super-i/o chips. There are some differences between the chips, though. To cover that, the super-i/o chip should select Kconfig options of this driver accordingly. The current implementation isn't exhaustive: It covers only those parts that are connected on boards I could test, plus those that are currently used by the IT8772F. The latter could be ported to use this driver if somebody minds to test it. Change-Id: I7a40f677f667d103ce1d09a3e468915729067803 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17284 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17arch/x86/acpigen: acpigen buffer size fixNaresh G Solanki
In function definition of acpigen_write_byte_buffer, buffer size written using acpigen_emit_byte gives wrong results in generated AML code for buffer size greater than one. Write buffer size using acpigen_write_integer as per ACPI spec 5.0 section 20.2.5.4 BufferOp. Change-Id: I0dcb25b24a1b4b592ad820c95f7c2df67a016594 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17444 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-16drivers/i2c/alps: Add support for ALPS Touchpad driverBarnali Sarkar
Add support for I2C ALPS Touchpad Device Driver. BUG=none BRANCH=none TEST=Build and booted successfully on KBL RVP and Touchpad is working Change-Id: I78b77bd7c4694ccf61260724f593bd59545c70e6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17390 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-16include/device/pci_ids.h: Correct Entertainment sub-classElyes HAOUAS
According to PCI LOCAL BUS SPECIFICATION, REV. 3.0 page 305, the sub-class for Entertainment en/decryption is 0x1010 Change-Id: Ia069e2ec328a8180fc1e2e70146c3710e703ee59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17436 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-16intel/fsp_baytrail: Fix assignment of PcdeMMCBootModeDavid Imhoff
Before the PcdeMMCBootMode in the Updatable Product Date was always assigned and didn't take into account the + 1 increment for the default define. Now if the configuration indicates that the device tree should be followed PcdeMMCBootMode is initially disabled. Else if configuration isn't the default, assign the value with the + 1 increment substracted. TEST=Intel/MinnowMax Change-Id: I6755eb585d1afe3a15f83347fba834766eb44ad2 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10165 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16intel/fsp_baytrail: Always log PcdEnableLpe and PcdeMMCBootModeDavid Imhoff
Log the values of PcdEnableLpe and PcdeMMCBootMode even if they are outside of the expected range. TEST=Intel/MinnowMax Change-Id: Ie0aea4287234b23d4e9852f3991dcc78ce8103d9 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
Reef board uses GPIO_17 as DMIC config pin. This pin distinguishes board with Quad DMIC's or Mono DMIC. This patch adds necessary DMIC endpoints to support either of those configurations. CQ-DEPEND=CL:*304339,CL:409774 BUG=chrome-os-partner:56918 BRANCH=none TEST=Verify Mono and Quad Channel DMIC record Change-Id: I5b2825b5f39f8962985a129f8ec65265fb18f0b2 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17158 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-16mb/ga-945gcm-s2l: Clean up SuperioArthur Heymans
GPIO register at offset 0xfc (VID Input Register) is read-only but writing 1 to bit 0 will update initial VID input. Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17412 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
Add the DIMM SPD data for memory types that are not used yet but are on the matrix and may be used in future builds. Also fix a typo in the part number string for one type. BUG=chrome-os-partner:58666 TEST=build and boot on eve p0 Change-Id: I20401d7afb69f1c3ae1a3b0d6e3ec9097f54ef96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17437 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>