| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I9cefa29738b42dd08cb00489ad6e8644e3fc405e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I47fded50377ab624e4bceb320a5e069a7f36c2fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I92c167bf95e605e098324b9e80cfaab8f589dcab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I284a5e39ca4b0032ed0c8e3a92c095db319d1691
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: Ide938a40ed1f6869ee248ed46f6bf29f95649490
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I9bf95ed74468e283bab79a5f25aee758d37d926a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The Intel Firmware Interface Table (FIT) is a bit of an annoying outlier
among CBFS files because it gets manipulated by a separate utility
(ifittool) after cbfstool has already added it to the image. This will
break file hashes created for CBFS verification.
This is not actually a problem when booting, since coreboot never
actually loads the FIT from CBFS -- instead, it's only in the image for
use by platform-specific mechanisms that run before coreboot's
bootblock. But having an invalid file hash in the CBFS image is
confusing when you want to verify that the image is correctly built for
verification.
This patch adds a new CBFS file type "intel_fit" which is only used for
the intel_fit (and intel_fit_ts, if applicable) file containing the FIT.
cbfstool will avoid generating and verifying file hashes for this type,
like it already does for the "bootblock" and "cbfs header" types. (Note
that this means that any attempt to use the CBFS API to actually access
this file from coreboot will result in a verification error when CBFS
verification is enabled.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1c1bb6dab0c9ccc6e78529758a42ad3194cd130c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There are too many "FIT" in firmware land. In order to reduce possible
confusion of CBFS_TYPE_FIT with the Intel Firmware Interface Table, this
patch renames it to CBFS_TYPE_FIT_PAYLOAD (including the cbfstool
argument, so calling scripts will now need to replace `-t fit` with `-t
fit_payload`).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I826cefce54ade06c6612c8a7bb53e02092e7b11a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=b:227946776
TEST=Validated on sc7180 Lazor board
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Change-Id: Ie4d7f7f0b24aee06ffb272b21b74fea4160fe87c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:210970640
TEST=emerge-draco coreboot chromeos-bootimage
Change-Id: I90d9f2e298e54832bc077eae1c8be0e39c151d90
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ied8eb0fb51d0521eedd8ff77b1083813d3843570
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Starting with id 2, boards switched the memory SMBus slave address, and
use 0x50, 0x52.
BUG=b:233975373
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I5e683ffdbc0727259ee796610cd97a6e378bf335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
FSP needs interrupts disable so also disable generating exceptions
around debug registers.
Change-Id: Ia49dde68d45b71e231aaf32a0e6fd847f0e06146
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64426
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new kingler follower 'steelix'.
BUG=b:232195941
TEST=make # select steelix
Change-Id: Idd2ed1404cde72ecdb6cc3a262e793a6272aa871
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Tested with SMI_DEBUG: SMM prints things on the console.
Change-Id: I7db55aaabd16a6ef585c4802218790bf04650b13
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is only meant to be used in early stages so move it back to
earlymtrr.c.
This reverts commit 3ad00d0c89c9e7a8e9ef13b6dc65bb338a191ec8.
Change-Id: I9bc1ac4b863eb43d3e398e6462ee139a7751bf62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64804
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mtrr_use_temp_range is a lot smarter than the plain set_var_mtrr. It
will compute a new optimal solution with the temp ranges included
while also taking care of the cleanup before loading the payload/s3
resume.
Change-Id: I283ba07fc12c410be39dfdc828657598237247c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63550
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that mtrr_use_temp_range() can deal with multiple ranges there is no
need to expose this to restore the MTRR solution.
This reverts commit 00aaffaf470adfbaa0fbfa0ec3cc67311763810b.
Change-Id: Ib77a0f52228cd2f19f3227824f704ac690be4aba
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64803
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Temporary MTRR setup usually covers the memory mapped flash. On recent
Intel hardware the mapping is not coherent. It uses an external window
for parts of the BIOS region that exceed 16M.
This now allows up to 10 temporary memory ranges.
TESTED: Qemu with multiple MTRR temporary MTRR ranges sets up a valid
and optimized temporary MTRR solution.
Change-Id: I23442bd2ab7602e4c5cbd37d187a31413cf27ecc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Updating from commit id 9ab0f0b:
sc7280: Update AOP firmware to version 379
to commit id e8efa5d:
sc7180/boot: Update qclib blobs binaries from 44 to 46
This brings in 7 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5f0a9075cde90991e927f3bfb75246bdb9877837
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A0 | MLB DB | A1
| |
+----------------+
BUG=b:232256907
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia288937ef3a4229088b60d87d31ea88057377a71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A0 | MLB DB | A1
| |
+----------------+
BUG=b:232256907
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: If2a77c0239646759e0192b72ba1991d334dd15aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A0 | MLB DB | A1
| |
+----------------+
BUG=b:232256907
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I47b069377046652ba4d278733a15bbca98bdb739
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This CL adds the delay time into the RTD3 sequence, which will turn
off the eMMC controller (a true D3cold state) during the RTD3 sequence.
We checked power on sequence requires enable pin prior to reset pin
delay of 50ms and add delay of 20ms to meet the sequence on various
eMMC SKUs. Based on BH799BB_Preliminary_DS_R079_20201124.pdf in
chapter 7.2.
BUG=b:232327947
TEST=Build and suspend_stress_test -c 2500 pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I42cde5336f73a446cf5157e78f955fef8d70ae7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11) for codec
selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BRANCH=dedede
BUG=b:226910787,b:232057623
TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I059b750743ab3b29d17c50d0d4301fbae4873acc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
|
|
BUG=b:227946776
TEST=Validated on sc7180 and sc7280 hardware
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Change-Id: I211e132d1728cf14bdd201b71618af89b339cbc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As cpucp prepare takes 300 msec moving to before ramstage
BUG=b:218406702
TEST=Validated on qualcomm sc7280 development board observed
total timestamp as 1.73 sec from 1.97 sec
Change-Id: I1a727514810a505cd1005ae7f52e5215e404b3bb
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Increase frequency of sc7280 to 75 MHz. Setting the delay to 1/8 of
a cycle as a result of experimentation.
BUG=b:190231148
BRANCH=None
TEST=Make sure that herobrine board boots
HW Engineer measured SPI frequency and verified running at 75 MHz
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I3cf5a7c85f12800a11ece397a354349f2a0a235f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64673
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are configured by the TXE, so they do not need to be configured.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia1bf4e32aa156a0e1a74df2f62eb31cdadb376a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Use shorter macros to configure GPIOs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I91961658dca0902080576134e63e6d8a7c78d711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Disconnect GPIOs that are unused or not connected.
Also, update comments that are vague or have errors.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic83797b8a8e05eed99db0356f360a329f6fbf347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
While on it, reformat code and remove unused macro.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I63e413820cb3f4dfa21d1692301348ecdb3190b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add supported memory parts in mem_parts_used.txt, and generate SPD id
for this part.
K3LKLKL0EM-MGCN
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ie022dd95929549ddd403d4c1d1c52174fd3fd721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Samsung K3LKLKL0EM-MGCN will be used by the nissa variant craask. Add
it to the LP5 parts list and regenerate the SPDs using spd_gen.
BUG=b:229938024
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I5648f297130eaf8541d99b2db7777774a0b1d8fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Change-Id: I0cd9960be80330b0b0bf476213bdc242db647e98
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ibcbaa39ee3922e1f7add8694d8c7c491881d7124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add 'detect' flag which can be attached to devices which may or may not
be present at runtime, and for which coreboot should probe the i2c bus
to confirm device presence prior to adding an entry for it in the SSDT.
This is useful for boards which may utilize touchpads/touchscreens from
multiple vendors, so that only the device(s) present are added to the
SSDT. This relieves the burden from the OS to detect/probe if a device
is actually present and allows the OS to trust the ACPI _STA value.
Change-Id: I1a4169ed6416d544773a37d29cdcc154d3c28519
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds the I2C equivalent of an SMBus quick write to an I2C
device, which is used by some I2C drivers as a way to probe the
existence (or absence) of a certain device on the bus, based on
whether or not a 0-byte write to an I2C address is ACKed or NACKed.
i2c_dev_detect() is implemented using the existing i2c bus ops transfer()
function, so no further work is needed for existing controller drivers
to utilize this functionality.
Change-Id: I9b22bdc0343c846b235339f85d9f70b20f0f2bdd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
0-byte writes can be used as a way to probe/check presence of an i2c
device, so adjust _dw_i2c_transfer() to immediately set the STOP bit
and raise logger level for TX abort messages when the segment length
is zero. Adjust dw_i2c_transfer() to allow zero-segment-length
messages to be passed thru to _dw_i2c_transfer().
Tested as part of entire i2c-detect patch train.
Change-Id: I518e849f4c476c264a1464886b1853af66c0b29d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Select vbt bin files based on DB_DISPLAY field of FW_CONFIG.
BUG=b:233690293
TEST=emerge-brask coreboot
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Idb92be66927259732bfd27e4db2c9f242da7d200
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
In order to meet the OEM's acoustic specifications, the pre-wake
randomization time (DPA) is set to 100.
BUG=b:228410327
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Idaf3f931a2c0f2373445948e5f53a82328ec7ba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Future nissa devices will mostly use 16MB SPI flash. Add 16MB layout and
make it default for nissa.
BUG=b:202783191
TEST=build nissa and brya firmware, check they're still 32MB
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I04ae46d62d3e018610ca2533c186dda980bd67bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
- Remove deprecated "MAINTAINER" lines
- Add Sphinx tools to coreboot-jenkins-node to check documentation.
- Add mdl to check markdown
- Alphabetize packages in docs Dockerfile
- Add jinja2 version 3.0.3 to the docs Dockerfile - The latest version
breaks with the error:
"exception: cannot import name 'contextfunction' from 'jinja2'"
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia1de62621a6aef4ecd055a1a3afbebad34448002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add winbond W25Q256JW chip details.
Change-Id: I0dab96701285be95a76cee674f83339bc63d9f82
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In preparation to follow-up commits, rename the mainboard folder from
t440p to haswell, which will have more variants later.
Change-Id: I4a9d68d54d5f0821bbf85faaa620855d456c97f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
PERST_0 is not used, so set this to GPIO_PRT0_UDEF (undefined) to
ensure that an undefined address is not added to GNVS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac9b116b2fa28824a89db28911188364dc9a1a53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Currently, the log message contains an unwanted trailing space, so
remove it.
[ERROR] Null dereference at eip: 0x3ffad01a
Change-Id: I64509ca4bad94c7db4279cc4c1e6fee2bba2e035
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There is NULL dereference in adjust_apic_id_map() and updating
apic_id_to_cpu[] array within SMM stub fails.
Initial apic_id_to_cpu[] array may have worked for platforms
where APIC IDs are consecutive.
Change-Id: Ie59a731bfc883f8a47048b2ceacc66f44aa5b68c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- Spelling fix
- Add languages
- Update formatting
- Move notes that shouldn't be in the description file to a README
Change-Id: I4af37327d5834f8546a3f967585658fb5686f17a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: I18398efefcb4171496c39462c23514ad61659213
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ic22fcbb7923ecac4c70147ae642ac28fac3e6e6d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I772ef94c860a26214bdae367d9863a56d5df9469
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I9940ad2e963458e4bc50c2a2957bb72cbd4109be
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I8ef0e67a8f26b98acea777afb26ed221bfa90153
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
To support speaker AMP CS35L53-CWZR'S I2C needs to split to two
I2C ports
BUG=b:207333035
BRANCH=none
TEST=built and verified speaker
Signed-off-by: Eddy Lu <eddylu@ami.corp-partner.google.com>
Change-Id: I8095abc4fc3233b21b818a508c84cd59b39fc1d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
|
|
Add notes for significant changes to payloads, such as new payloads and
version updates.
Change-Id: I607d732beee07396a8002e5e504375d9dc4d7eda
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64752
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit bd9cec8ae5755e898d107fd061fc2e2f983552b9.
Reason for revert: Enable i2c7 for amp changing to 2 channel
because vell setting amp on i2c0 and i2c7 on next phase
BUG=b:229334701
TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend
&& checks EC log and ensures the DUT could enter s0ix.
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Change-Id: I5988cd9926b2c9ced1d111774abaa897bef91537
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ibba8558dd1825a864b427097aff8552933cc6fc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib6f0232292c9e289ee1e87998493ea70beea8e78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I47add663f3021170b840203ce229acf836b7a1c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There shouldn't be any significant changes in meaning.
- Fix formatting issues
- Reword some text
Change-Id: I4e37605ef2371e6c4affbe6cb6c67e0875e89a1f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The description.md file for the intelp2m utility wasn't the description
that was needed - just a subject, and what language it was written in.
It was instead a set of more full documentation, so move it into the
Documentation directory and create a new description file.
Change-Id: Ia180ae41f91f8b8eb408351a9e44e899edc031d3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This fixes the following warnings:
mainboard/starlabs/common/flashing.md::
WARNING: image file not readable:
- mainboard/starlabs/common/fwupdVersion.png
- mainboard/starlabs/common/BiosLock.jpg
- mainboard/starlabs/common/SwitchBranch.png
cbfstool/index.md::
WARNING: document isn't included in any toctree
internals/devicetree_keywords.md::
WARNING: document isn't included in any toctree
mainboard/asus/wifigo_v1.md::
WARNING: document isn't included in any toctree
mainboard/google/index.md::
WARNING: document isn't included in any toctree
mainboard/starlabs/common/flashing.md::
WARNING: document isn't included in any toctree
releases/boards_supported_on_branches.md::
WARNING: document isn't included in any toctree
WARNING: None:any reference target not found:
- releases/coreboot-4.16-relnotes
- releases/coreboot-4.15-relnotes
- releases/coreboot-4.14-relnotes
- releases/coreboot-4.13-relnotes
- releases/coreboot-4.12-relnotes
- releases/coreboot-4.11-relnotes
- releases/coreboot-4.10-relnotes
- releases/coreboot-4.9-relnotes
- releases/coreboot-4.8.1-relnotes
- releases/coreboot-4.7-relnotes
- releases/coreboot-4.6-relnotes
- releases/coreboot-4.5-relnotes
- releases/coreboot-4.4-relnotes
- releases/coreboot-4.3-relnotes
- releases/coreboot-4.2-relnotes
- releases/coreboot-4.1-relnotes
- ../../src/soc/intel/common/block/cse/cse.c
Change-Id: I22273bc1bc34b6297cef4e594c454c2316d4215a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Kinox has four temperature sensors. Modify the target of DPTF active
policy to map correct temperature sensor.
BUG=b:231380286
TEST=Boot to Chrome OS and doesn't see "DPTF: Invalid sensor ID" from ec
comsole.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Icb5c285a6f483e2a1b6510a962ff7f7f6e9a79e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I4be0a4ad980b4167eaaafc22399b680abf011553
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This reduce difference with linux v5.18.
Change-Id: Id9412f7b6c0b9f76b39a094142aaded5c2aa1059
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This reduce difference with linux v5.18.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I817630321587dec515cd94aa7b73a17819526190
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This reduce difference with linux v5.18.
Change-Id: I1fc71b9cb6a4e4f8b27fbe6d45f4fa4e2c236157
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Intel Meteor Lake SoC expects to select x2APIC for accessing LAPIC
hence, this patch provides an option where SoC code choose the correct
LAPIC access mode using choice selection.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I39c99ba13ad6e489c300bd0d4ef7274feeca9d4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The dGPU used for some Brya projects requests 32 bits of address space
for one of its BARs via the Resizable BAR mechanism. This Kconfig is
currently set at 29 bits for brya, so the allocation currently is
capped at 29 bits. This patch sets the limit to 32 bits for brya
boards, which is enough for the GPU.
BUG=b:214443809
TEST=all of the dGPU PCI BARs on agah can be successfully allocated
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I61dbe47f1f316967d052bae748ff23babde61ef0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
When a PCI resource is marked as 64-bits, the IORESOURCE_ABOVE_4G flag
needs to be passed to the v4 allocator to ensure that the resource will
be allocated in a range large enough to succeed.
BUG=b:214443809
TEST=agah can successfully allocate all of the Nvidia GN20 BARs
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3f16f52f2a64f8728853df263da29871dca533f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
While testing the power sequencing code for the GPU, a few mistakes were
found. This patch fixes those errors:
1) FBVDD load-switch enable is active-low
2) NVVDD VR enable is active-high
3) GPU_PERST_L should be driven low during GPIO table programming
4) The BAR saving code missed the top 32 bits of 64-bit BARs
5) sequence_rail() assumed the pwr_en_gpio and pg_gpio were the same
polarity
6) PEG vGPIOs were not programmed to the correct NF
BUG=b:233552225
TEST=dGPU is able to successfully enumerate over PCIe bus
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I85767d382012a0c7dfdb1f849768e0160f06c273
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add fw_config support NMAX98360_ALC5682VS_I2S_2WAY and I2S2 vgpio
config and enabling cnvi_bt_audio_offload UPD bit.
BUG=none
TEST=emerge-brya coreboot
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: I64a4e5479905911b2e9d1597b78131720abb689e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
coreDOOM is a port of DOOM to libpayload, based on the doomgeneric
source port. It renders the game to the coreboot linear framebuffer,
and loads WAD files from CBFS.
Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the
libgfxinit provided linear framebuffer.
Project page: https://github.com/nic3-14159/coreDOOM
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
After commit ae48b42683 (payloads/tianocore: Init submodules),
Tianocore's Makefile no longer detects an unclean working directory and
thus always performs a `git checkout`, overwriting any uncommited
changes made in the cloned sources.
The change of "clean" to "dirty" effectively inverts the logic of the
if-else condition, which would normally swap the two possible code paths
of the branch. However, since `git status` outputs multiple lines, most
of which do not contain "clean", the -v option (select non-matching
lines) causes grep to always match at least 1 line and thus return
success. This causes the if-else branch containing the `git checkout`
to always be taken regardless of the state of the working tree, masking
the issue of the inverted logic. Removing the -v option addresses both
of these issues and restores the intended behavior of the if-else block.
TEST:
1) Build coreboot successfully with the Tianocore UefiPayloadPkg option.
2) Make a change in the cloned Tianocore sources that results in an
unclean working directory and check for the "Working directory not
clean" message when building coreboot.
Change-Id: Icd4952b40c147d0fba676089ced5a8b59b93ad50
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
The default for DPTF is off (0), so remove the entry that sets this to
off.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0397ff6f71766a2f738ab2b71be298ef8f2b1c9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Since using FSP 2.2.0.0, the defaults match the required settings so
they no longer need to be specified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie0e00cae67cb89b184392e97b8ec196d45ea5d91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add PCI IDs for Alder Lake H devices and their GPIO tables.
PCI IDs as per Intel PCH-H EDS Vol1 (doc #619362).
TEST=dump GPIOs on i5-12600K with Z690 chipset
Change-Id: I0001395517e1e7977b0f808d5d74cf85c52298d6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Correct the USB-C port setting according to schematics.
AP log:
port C0 DISC req: usage 1 usb3 3 usb2 1
port C1 DISC req: usage 1 usb3 1 usb2 3
BUG=b:233554817
BRANCH=brya
TEST=emerge-draco coreboot chromeos-bootimage
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Iea4aee19dff8e0bc863be46532f89e81f52f281b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
We need to put USB setting in mux order.
BUG=b:234103724
TEST=Type C mux configuration is correct.
Wrong:
added type-c port0 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
added type-c port1 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
Correct:
added type-c port0 info to cbmem: usb2:3 usb3:3 sbu:0 data:0
added type-c port1 info to cbmem: usb2:2 usb3:2 sbu:0 data:0
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I4f8dbee35159960d17107e23fcde825a38c7de4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses coreboot error codes instead of uint8_t data type in the
pre_mem_debug_init function.
TEST=build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I957ff764900cb789bf2aacf0472dcb281f48af07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Tested using MrChromeBox's `uefipayload_202107` branch:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/labtop-mk-iii-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia52566e06f50c0abcfb657044538db8e92564c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ben McMillen <ben@starlabs.systems>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia6c3ba80d5e6ac3d4fd8a935732ef7e32cf33998
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This changes the behavior of '-L/--clang' to only buildtest when a
target has ARCH_SUPPORTS_CLANG set.
Change-Id: I362fcd0f795d27f13dde793a79774f08c497bd38
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This adds 2 flags:
* invisible opt-in flag for platforms on which clang seems to work
* visible opt-in flag to allow experimenting
Clang seems to work rather well on x86_32 so it makes sense to start
adding that to Jenkins buildtesting, which this allows.
This allows abuild to differentiate between targets that are known to
build with clang. This makes buildtesting just those targets easier.
Change-Id: I46f1bad59bda94f60f4a141237ede11f6eb93cc2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Systems have a lot more cores now and 4KiB is not cutting it. E.g.
for a system with 255 cores more than 16KiB is needed.
We could also make this a Kconfig parameter but it's probably not
worth having such micro optimizations to save a few KiB.
Change-Id: Idd47e55d8d679cc70eae996ee1af3ad7eaa1d0cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If1b263345baf321cde75058f310c96d89a95d62d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I079c99006fea95ba3dc2fb02c95a3747af55e218
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that the save state size is handled properly inside the smm_loader
there is no reason to make that distinction in the mp_init code anymore.
Change-Id: Ia0002a33b6d0f792d8d78cf625fd7e830e3e50fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code was hard to read as it did too much and had a lot of state
to keep track of.
It also looks like the staggered entry points were first copied and
only later the parameters of the first stub were filled in. This
means that only the BSP stub is actually jumping to the permanent
smihandler. On the APs the stub would jump to wherever c_handler
happens to point to, which is likely 0. This effectively means that on
APs it's likely easy to have arbitrary code execution in SMM which is a
security problem.
Change-Id: I42ef9d6a30f3039f25e2cde975086a1365ca4182
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
We don't want to keep track of the real smm size all the time.
As a bonus now ss_start is now really the start of the save state
instead of top - MAX(stub_size, save state size).
Change-Id: I0981022e6c0df110d4a342ff06b1a3332911e2b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code is much easier to read if one does not have to keep track of
mutable variables.
This also fixes the alignment code on the TSEG smihandler setup code.
It was aligning the code upwards instead of downwards which would cause
it to encroach a part of the save state.
Change-Id: I310a232ced2ab15064bff99a39a26f745239f6b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This is a duplicate of code_start.
Change-Id: I38e8905e3ed940fb34280c939d6f2f1fce8480a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This code was very hard to read so rewrite it using as few mutable local
variables as possible.
Tested on qemu with 128 cores.
Change-Id: I7a455ba45a1c92533a8ecfd1aeecf34b4a63e409
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
| MLB DB | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ibd36fb961de9e9af9da1fd885eeb958c833d38bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A | MLB DB | A
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia66c6fafe08110b8d8f9a138a2516ae03f8e1809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A | MLB DB | A
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Icd56c650a03c5db6e1e68e4ca4c9f0c068a7a430
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB |
A | |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia493fd28c362d2c0c343c2d121f6611cfd8f7f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
| | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I840b0f363a1ff304b310505efdaba2ac1cd10472
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | C1
| MLB DB | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ie4f96e3636a8b519923fdba7f9bd07d7a3e1d7ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
