Age | Commit message (Collapse) | Author |
|
Update the build instructions for CorebootPayloadPkg to target the
Galileo Gen2 platform.
TEST=Build and run on the Galileo Gen2 platform.
Change-Id: I9ca8a67811eff988f81f04d4c01c77115356c050
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13756
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable baud rates of 230400, 460800 and 921600. Leave the default set
to 115200.
TEST=Build and run on Galileo at 921600.
Change-Id: I8e3980f33665bc183b454cf97c68e297f1b0502c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13755
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0edbc93807028a091f0f1bcae81a4092538a3422
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13747
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot passes information about the serial port implementation to
payloads through a cbtables entry.
We set the register width to 1 on most SoCs because that looked as good
a default as any, but checking the uart structs they use, it's 4 for all
of them.
Change-Id: I9848f79737106dc32f864ca901c0bc48f489e6b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13746
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The commit description is enough and this avoids hourly updates of the
timestamp by a cron job.
Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Old map does not work on recent qemu. New map puts coreboot to ROM, so
it behave more like most real machines would.
For details on this map see comment in memlayout.ld
Change-Id: If1f3328b511daca32ba93da5a6d44402508b37e9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some vendors store lower frequency profiles in the regular SPD,
if the SPD contains a XMP profile. To make use of the board's and DIMM's
maximum supported DRAM frequency, try to parse the XMP profile and
use it instead.
Validate the XMP profile to make sure that the installed DIMM count
per channel is supported and the requested voltage is supported.
To reduce complexity only XMP Profile 1 is read.
Allows my DRAM to run at 800Mhz instead of 666Mhz as encoded in the
default SPD.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Change-Id: Ib4dd68debfdcfdce138e813ad5b0e8e2ce3a40b2
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13486
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib2da7f2210a823fce7f05824e2a2b73d3c0490e9
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13738
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This builds and produces an image.
The next step is to get a 'halt' instruction into the boot block and then attach with qemu.
I can't get the powerpc64le-linux-gnu-ld.bfd to recognize any output arch but
powerpc. That makes no sense to me.
Change-Id: Ia2a5fe07a1457e7b6974ab1473539c7447d7a449
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13704
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1088064e5f84fcabcd51e0eaaedfb5074f7fb2b5
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13709
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Use printram() in more places and use printk() only where
it makes sense.
Remove spamming "MRd: %x <= %x\n".
Use common syntax for timing output.
Change-Id: I38965967a029994112d7ab63afd4d9968a7728c5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13414
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use single ID value for HSUART1.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Debug serial output stays enabled after BS_DEV_RESOURCES state
Change-Id: I38eca247f151e67c2b243a8a3bb21d9d1f4603de
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13734
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add documentation on:
* FSP Silicon Init
* How to start the x86 device tree processing for ramstage
* Disabling the PCI devices
* Generic PCI device drivers
* Memory map support
TEST=None
Change-Id: If8f729a0ea1d48db4d5ec1d4ae3ad693e9fe44f0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13718
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add EDK2 CorebootPayloadPkg build instructions, EDK2 documentation links
and EDK2 BIOS build instructions.
TEST=None
Change-Id: I236405914c5fa8e33a7826cc4fa60f6dbf0e7724
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13717
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I17ba5a85fecf08ab9970a57c7696525287bbc5a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13745
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
When CONFIG_LP_TIMER_RDTSC is enabled honor the TSC information
exported in the coreboot tables as the cpu_khz frequency. That
allows get_cpu_speed() not to be called which currently relies
on the 8254 PIT. As certain x86 platforms allow that device
to be optional or turned off for power saving reasons, allow
a path where get_cpu_speed() is no longer called. Additionally,
this approach also allows the libpayload to not duplicate logic
that already exists in coreboot.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Confirmed in payload TSC frequency is honored instead of
using get_cpu_speed().
Change-Id: Ib8993afdfb49065d43de705d6dbbdb9174b6f2c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13671
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The 8254 (Programmable Interrupt Timer) is becoming optional
on x86 platforms -- either from saving power or not including it
at all. To allow a payload to still use a TSC without doing
calibration provide the TSC frequency information in the coreboot
tables. That data is provided by code/logic already employed
by platform. If tsc_freq_mhz() returns 0 or
CONFIG_TSC_CONSTANT_RATE is not selected the coreboot table
record isn't created.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=With all subsequent patches confirmed TSC is picked up in
libpayload.
Change-Id: Iaeadb85c2648587debcf55f4fa5351d0c287e971
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13670
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Add lb_arch_add_records() to allow the architecture code to
generically hook into the coreboot table generation.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=With all subsequent patches confirmed lb_arch_add_records() is
called when a strong symbol is provided.
Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13669
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: I49292e69a5636c675bb8ed7cfe4462ca8189487e
Signed-off-by: Andrew Waterman <waterman@cs.berkeley.edu>
Reviewed-on: https://review.coreboot.org/13736
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id547c98e876e9fd64fa4d12239a2608bfd2495d2
Signed-off-by: Andrew Waterman <aswaterman@gmail.com>
Reviewed-on: https://review.coreboot.org/13735
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib20d88bb208a605b6bf44e6bf7151c24a08549aa
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13702
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
|
|
- Add Kconfig and Makefile options to use U-Boot as a payload.
- Add Kconfig option for extra cbfstool command line arguments.
- Add Kconfig & Makefile option to load the payload as a flat binary.
- Add u-boot directory to .gitignore.
This is currently working for X-86 only.
Graphics worked in U-Boot correctly by initializing the VBIOS and
setting up a console mode.
Tested in QEMU and on Minnowboard Max. Got into U-Boot, have not
booted an OS yet.
Change-Id: Ia122a4ad7cd7d96107c1552b0376c8106ca8fb92
Signed-off-by: Martin Roth <martinroth@google.com>
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/12714
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable HSUART1 for debug serial output. Specify the fixed resources in
the UART driver. This keeps debug serial output flowing during the rest
of the device initialization.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Debug serial output stays enabled after BS_DEV_RESOURCES state
Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13730
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add ramstage.h to define some of the common header files used by the
drivers in ramstage.
Add northcluster.c, the driver for the memory controller, which defines
the memory map.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* Memory map successfully displayed in BS_WRITE_TABLES state
Change-Id: I8dc91119eaad0b7abc2e484d13ee708ba1253438
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the chip and domain support which enables the display of the vendor
and device IDs for the PCI devices.
Testing on Galileo:
* Edit src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* The PCI vendor and device IDs are displayed.
Change-Id: I517dcafd83c7dd850bc3471f939d6804a05020c3
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add an optional routine to translate the device path types into a string
for display.
TEST=Build and run on Galileo
Change-Id: Iea5d0a2430d9a8546105324e2beda0955210dca9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update ATF codebase to a version that supports passing a timestamp and
fix the format to what it accepts now (including quotes).
This provides reproducible builds.
Change-Id: I12a0a2ba1ee7921ad93a3a877ea50309136ab1ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13726
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GPIO USB_A0_ILIM_SEL & USB_A1_ILIM_SEL should be low to enable 2A
charging from the USB Type-A port.
BUG=chrome-os-partner:50212
BRANCH=glados
TEST=Build CB & booted kunimitsu, verified that USB_A0_ILIM_SEL &
USB_A0_ILIM_SEL are at logic zero.
Change-Id: I989987eaaa2015720bbb1403caf20b97a996e168
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 640834506ad749359104e24fdb664044d499fd5f
Original-Change-Id: I741f79a69b78dbb7d4f8cb9718355d802b94b96d
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327121
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13722
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This changes how we build and use cbfstool:
1. If build/cbfstool exists, use it.
2. Otherwise, try util/cbfstool/cbfstool.
3. As a last resort, build it and clean it when we're done.
Hopefully this will resolve issues people have had with permissions
and reduce overhead of building cbfstool when not necessary.
Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12490
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is a pretty basic script that can be downloaded with wget to a
ubuntu-based live image, and will set it up so that the board_status
script can connect and run cbmem.
1) Verify that this is being run on a ubuntu-based live image by
checking for the installer.
2) Install and configure the ssh server.
3) Set a root password 'coreboot' so that root can log in.
4) download and build cbmem.
5) find and print the IP(s) that should be used to connect.
Change-Id: I068423c9f5501b156f25371d89559f4a206916b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13648
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When TPM support is enabled, verify the TPM_DID_VID field is not
all zeroes or all ones before returning 0xf in the _STA method.
This avoids these kernel errors when no module is installed:
[ 3.426426] tpm_tis 00:01: tpm_transmit: tpm_send: error -5
[ 3.432049] tpm_tis: probe of 00:01 failed with error -5
Change-Id: Ia089d4232e0986b3bc635d346e68d982e8aecd44
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/13713
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Drop buggy duplicate implementation of intXX handlers
and provide enough glue to use all of YABEL.
Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12117
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a
change autoport as well, as suggested by Vladimir.
Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13731
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Issue observed:
The PCIe Root port shows up in GNU/Linux but no PCIe device
is being detected.
Test system:
* Gigabyte GA-B75M-D3H (Intel Pentium CPU G2130)
* Lenovo T530 (Intel Core i5-3320M CPU)
Problem description:
The PEG Root port link training on Ivy Bridge needs to be manually started.
Problem solution:
The bits are set in early_init to meet PCIe reset timeout of 100msec.
The bits should be set in PCI device enable function, but this causes the
PCI enumeration to not detect the card, as it's still booting. Adding
a fixed delay of 100msec resolves this problem, but this would
increase boot time.
Read the PCI base revision mask to make sure it's any IvyBridge CPU.
Don't run the code on MRC path as it has its own PEG initilization code.
Tested with:
* Nvidia NVS 5400M (PCIe2)
* ATI Radeon HD4780 (PCIe2)
* Nvidia GeForce 8600 GT (PCIe1)
Untested:
* PCIe3 devices
Final test results:
The PEG device shows up under GNU/Linux and can be used without issues.
Change-Id: Id8cfc43e5c4630b0ac217d98bb857c3308e6015b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/11917
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The PCIe slot uses Message Signaled Interrupts (MSI) as the
IGD does and doesn't use hardware INT lines.
Adding the IRQ entry for PEG slot fixes a warning showing up in
GNU/Linux dmesg.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: I5ac40e7bea9a659c6c89262aac4552bc8177a9e5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13612
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use shared gpio code from common folder.
Bd82x6x's gpio.c and gpio.h is used by other southbridges
as well and will be removed once it is unused.
Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13614
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I397c908867fef7583063c8cad7b83ce53482529b
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13708
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8665724c381c204af5bc8bb06117c8af9c32be8a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the DEBUG_BOOT_STATE Kconfig value to enable boot state debugging.
Update include/bootstate.h and lib/hardwaremain.c to honor this value.
Add a dashed line which displays between the states.
Testing on Galileo:
* select DEBUG_BOOT_STATE in mainboard/intel/galileo/Kconfig
* Build and run on Galileo
Change-Id: I6e8a0085aa33c8a1394f31c030e67ab3d5bf7299
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13716
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic249ee89d8683b9ecc020d1ec6934019ae5ae1b6
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13724
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable PCIe root port 0
Testing on Galileo:
* Add a 802.11 wireless card in the mini-PCIe slot
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing successful if:
* After PCI 00:17.0, memory addresses are assigned to the 802.11
wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state
Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13723
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add additional lines to the devicetree.cb file to disable the PCI
devices in the Quark SoC.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if:
* Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage
Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I3004eac248561b0cd4e44bcef90fc66fae5d77ca
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13727
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
On certain platforms, the boot media is either not memory-mapped, or
not mapped at the top of 4G. This makes the default mmap_boot
implementation unsuitable. Add an option to allow such platforms to
define their own mapping implementation.
Change-Id: I8293126fd9cc1fd3d75072f7811e659765348e4a
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13319
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It looks like the falling timing was missing the shift offset.
Not sure if this was intentional, I guess not.
Tested on my hardware and produced no regressions.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Please test on real hardware !
Change-Id: Id8c60217093a48bf322f406ea258c10a02c936e8
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13682
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1dc9469e3d001fe0d5b0517d45679b056586b5b3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13556
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Once bootblock copied romstage into CAR it may not jump into it right
away. This is because we are in NEM mode, there is no backing store
and a miss in L1 may cause L1D line snoop that gets written back. The
solution is to flush L1D to L2 so snoop guaranteed to hit L2.
Change-Id: I2ffe46dbfdfe7f0ccd38b34ff203ff76b6d5755b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13703
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The Kconfig option "ON_DEVICE_ROM_RUN" suggests that PCI Option ROMs
are run, but in fact it only controls the loading of PCI based
Option ROMs.
At the moment coreboot only executes Option ROMs if they are
VGA Options ROMs and the VGA Option ROM execution flag is enabled.
Setting ON_DEVICE_ROM_RUN with VGA Option ROM execution disabled
has no effect.
Clarify that this flag controls the loading behaviour and not the
execution behaviour.
Change-Id: Ie3e503cb145f9b7ce613755e60ac0f6c00f2bcdb
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13684
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a common southbridge gpio code to reduce existing
duplicated code.
By adding it to ram-stage, GPIOs can be changed any time,
without the need of direct register access.
The files are based on bd82x6x and lynxpoint gpio.c.
Change-Id: Iaf0c2f941f2625a5547f9cba79da1b173da6f295
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/12893
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Power 8 was once again having build issues. Adding --with-system-zlib
fixes them. It seems the builtin one is only needed when you are going
to build programs, and it falls apart in other cases.
Searching --with-system-zlib reveals this to be a very popular topic.
This has not broken other toolchain builds (for me); it should not for
anyone else. Then again, this is gcc, about which I need say no more.
Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Once we lock down the SPI BAR we need to tell SMM to re-init its
SPI driver or it will be unable to write ELOG events via SMI.
This SMI is also sent at the end of depthcharge so there was just
a window where SMI events could get lost.
BUG=chrome-os-partner:50076
BRANCH=glados
TEST=enable DEBUG_SMI, boot to dev screen, press power button and
see elog events get added without without transaction errors.
Change-Id: I1f14717b5e7f29c158dde8fd308bdbfb67eba41a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 60ca24c760c70e2ebe5f3e68f95d3ffdba0fef9e
Original-Change-Id: I4e323249f00954e290a6a30f515e34632681bfdd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326861
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13697
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The PCH does not set PM1_STS[WAK_STS] bit when waking from a
G3 state, which is triggered by hibernate now on chell when we
do a PMIC shutdown. This means the checks for S5 wake are not
done and instead it is logged as a wake from S0.
BUG=chrome-os-partner:50076
BRANCH=glados
TEST=pass firmware_EventLog test on chell
Change-Id: I3ca05a4824df3401150a63d4b6555f759de40087
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de6c9bac447edd06568193f990f1f4e278576783
Original-Change-Id: I4472498468d620fe69f2b68710e818a4ad287382
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326888
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13696
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change will allow the kernel to use 4-lane eDP connections
if the GOP driver does not execute and set this bit. If GOP
has executed (everyone but Chrome OS verified mode) the link will
already be up and this will do nothing.
BUG=chrome-os-partner:50197
BRANCH=glados
TEST=boot on chell and ensure 4
Change-Id: I9e2328b00db84f26b9bd03220b8ac0bd5f64cfbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cff83e18ce9936c8d507f93c8443b7056c62e844
Original-Change-Id: I3f1e5d78b91eb0e4a23fcc196aff0edadc252a0c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/327251
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13690
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This method creates a named object and should be serialized to avoid
a compiler warning from recent iasl releases.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=emerge-chell coreboot with no iasl warnings
Change-Id: If54df4eca8849a8d278816712164b30a775a41ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9aa8c5627276be08bf0dc3d0f4b9b7bd3f40c227
Original-Change-Id: Ieb05525503bf61c9922677484aba5479856a3f35
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326843
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13689
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
oldconfig is regularly used to clean up templates that sometimes contain
duplicates or old symbols.
Since it cleans up the config, it doesn't need to fail on issues.
Change-Id: Ife0e9e3b9bfdde1eb6be0e2e38e81b9042cb7950
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13687
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The intend is to seek upgraded microcode in RW section and load it
before Fsp memoryinit, to ensure any goodness in the microcode update,
especially related to memory configuration, can be applied earlier.
BUG=chrome-os-partner:50132
BRANCH=glados
TEST=Built and boot on kunimintus. Verified microcode gets reloaded.
Boot time impact is very minor.
CQ-DEPEND=CL:327170
Change-Id: I1a5df1d1efa25fb256743dca6a661c828263ec7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d7f700c1876e53194748d1d1c66637b9419b7086
Original-Change-Id: I7083ec6305af9e14a57d7b0cb1bd800cd9e22f44
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327193
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13688
Tested-by: build bot (Jenkins)
Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
These license headers were either not compliant with the coreboot
standard or were missing completely.
Change-Id: I0c46ad9ba7f3d950b3eff96ee6e9c36acbf1a3a5
Signed-off-by: Damien Roth <yves.r.roth@gmail.com>
Reviewed-on: https://review.coreboot.org/13288
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add missing license headers to files that have no coreboot header.
Change-Id: Iaaa04b5dcbd446a2064ac68d501ae8e860486e36
Signed-off-by: Damien Roth <yves.r.roth@gmail.com>
Reviewed-on: https://review.coreboot.org/13289
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reduce the debug output from FMAP lookups. When we had one or
two FMAP lookups in a boot this was not a big deal, but now that
we do many lookups it is a lot of unnecessary output duplication.
This change reduces these 3 lines:
FMAP: area VBLOCK_A found
FMAP: offset: 200000
FMAP: size: 65536 bytes
To just one line:
FMAP: area VBLOCK_A found @ 200000 (65536 bytes)
And makes the header output only print once:
FMAP: Found "FMAP" version 1.0 at c10000.
FMAP: base = 0 size = 1000000 #areas = 29
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=boot on chell and enjoy non-truncated memconsole
Change-Id: Ib5862b8bfad113a700faae89089557094aa6d499
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6890f36536d4ae6fc4988fc8191b0cff4e33e2e6
Original-Change-Id: Ifefee1ab26e6ee406de552880fbbd5b7916fcadd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326887
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13695
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These licence headers were not compliant with the coreboot standard.
Change-Id: I85bb5f971ab1f8ac3e9589f712370fbf09716b67
Signed-off-by: Damien Roth <yves.r.roth@gmail.com>
Reviewed-on: https://review.coreboot.org/13287
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Apparently acpica-unix is shipped under
"A non-open source license (the 'Intel license')" while acpica-unix2
comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing)
So go with unix2.
Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13686
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Otherwise the image is simply unusable.
Change-Id: I1e2562ba17279d14dc73b05e4f8fa493e06fbcd2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13699
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Ensure the pads passed into the gpio functions are within
range.
Change-Id: Ic523cbfaf60a46709080347af3a36d6330f9a07c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13694
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To allow sharing macros in ASL as well as C the macros can't
have complex expression because the ASL compiler does not
evaluate those expressions. To that end, just pre-calculate
the values. Lastly, add N_OFFSET and utilize it for symmetry.
Change-Id: I546d71008e776b27ce8bcd24d2cbd2ee1b2d8020
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13693
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The CSE places the bootblock (IBBL in Intel parlance) below 4GiB
at top of the address space. However, it's size is limited to
32KiB. For now, just limit all of bootblock to 32KiB.
Change-Id: I8f84138fb81027eae1712b7af3943942c35cf0ea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13692
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Certain platforms may need to limit their bootblock size to within
a given size because specific constraints. Allow the size to be
provided by the mainboard or chipset by way of the arch Kconfig
being processed after those.
Change-Id: I46cc6315918cde575070fa2d3e2514f28008f575
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13691
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ic90d3aa714e5681c5021e2b05275d57dce428de0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13664
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We've had a second version of ulzma() that would check the input and
output buffer sizes in libpayload for a while now. Since it's generally
never a bad idea to double-check for overruns, let's port it to coreboot
and use it where applicable. (This requires a small fix in the four byte
at a time read optimization we only have in coreboot, since it made the
stream counter hit the end a little earlier than the algorithm liked and
could trigger an assertion.)
BRANCH=None
BUG=None
TEST=Booted Oak, Jerry and Falco.
Change-Id: Id566b31dfa896ea1b991badf5a6ad9d075aef987
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These SoCs have come within a kilobyte of their romstage limit, so let's
expand that a little to make room for future core code contributions.
(In the Tegra case just by copying the layout from Tegra210, because
why not? Keeps things simple.)
BRANCH=None
BUG=None
TEST=Ran abuild with and without --chromeos for Foster, Rush, Ryu, Smaug
and Urara.
Change-Id: If8c1ea81cf9827412c78d67a09d54e7a2dc044ac
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Having two separate memlayouts is an unnecessary complication.
Contributors need to make sure that their code fits into the vboot one
(with smaller stage sizes) either way, and the Tegras have plenty of
SRAM anyway. Let's just make the vboot layout the default (as it was
done on other SoCs) to keep things easier to maintain. The empty SRAM
holes on non-vboot systems where the verstage and work buffer would've
been won't hurt them.
BRANCH=None
BUG=None
TEST=Ran abuild with and without --chromeos on Foster, Rush, Ryu and
Smaug.
Change-Id: If37228facb4de1459cc720dca10bf03e04eb9930
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13667
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch generalizes the approach previously used for ARM32
TTB_SUBTABLES to "auto-detect" whether a certain region was defined in
memlayout.ld. This allows us to get rid of the explicit Kconfig for the
TIMESTAMP region, reducing configuration redundancy and avoiding
confusion when setting up future boards.
(Removing armv4/bootblock_simple.c because it references this Kconfig
and it is a dead file that I just forgot to remove in CL:12076.)
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that all pre-RAM timestamps are still
there. Built Nyan and Falco.
Change-Id: I557a4b263018511d17baa4177963130a97ea310a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13652
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some spaces crept in where there should be tabs.
Change-Id: Ie70469f5a16e8a2d5933ac632d13551b19761064
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13698
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
cbfstool has a routine to deal with old images that may encourage it to
overwrite the master header. That routine is triggered for
"cbfstool add-master-header" prepared images even though these are not
at risk, and - worse - destroys the chain structure (through a negative
file length), so avoid touching such images.
Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13672
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id695fb6e759b90cd91bb9760bb4fe2a459480b21
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13663
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ibbb056ae209a16533757af925c8c833c94803834
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13662
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I95173c06d334a340fa2157511a1d69f38877b264
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13665
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I808a739c91cb52782db46fd4897b6b913224d93f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13666
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This makes the test IDs the default, taken from depthcharge
master (board/*/fmap.dts, hwid property).
Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13634
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I7b1e046d5895750d350dfa851a6f51c3a3a1613f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13659
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If64607d40a64ada8cfe4c3ad054be9d6571fc221
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13660
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Tested by making lenovo x230 configurable despite pretty MRC bugs.
Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13658
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When updating an old .config file that has a symbol that has been
removed from the current Kconfig tree, kconfig will generate a warning
and fail to save the updated file. This is incredibly annoying, and
not the goal when trying to eliminate Kconfig warnings.
Instead of generating a warning, just print a message that it's being
ignored. This will remove the offending symbol, while allowing the
updated config file to be saved.
Split the change from 1 line to 3 lines to keep it at 80 characters.
Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Those aren't used anymore.
Change-Id: If7baf2d03c47bcc6f69d63a349bbf9d5e749aeac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13685
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This was copied from mrc structure despite them having fields in different
order.
Change-Id: If10ffa3316c5fdc538a6fabf2409512bc8c3e676
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13661
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
off_t wants to be printed with %zd, not %d.
Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13655
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Make sure that the statically defined CRC functions are
enabled by the same conditionals as the code using them.
Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13654
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
dep has not been defined (and will hence break the build)
LDFLAGS is not used.
Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13653
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic9d8c2a4e5125eca20eb692ac7ed070fda6cbe32
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13657
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13656
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It is silly to have a single header to declare the main()
symbol, however some of the arches provided it while
lib/bootblock.c relied on the arch headers to declare it. Just
move the declaration into its own header file and utilize it.
Change-Id: I743b4c286956ae047c17fe46241b699feca73628
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13681
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
jmp_to_elf_entry() is not defined anywhere. Remove it.
Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no delcaration used. Remove the include.
Change-Id: I6fa7de6362ca0e92f0d5a7d07f3a224b9f77f709
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's no longer used. Remove it.
Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13678
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since we're reaching the timestamp limit on certain platforms (both for
the pre-RAM cache and the final CBMEM region), this patch increases the
amount of space for both. In the pre-RAM case, it achieves this by
always utilizing the full size of the TIMESTAMP() region allocated in
memlayout.ld, rather than arbitrarily limiting it to some constant.
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that I can once again see all pre-RAM
timestamps after picking in the LZ4 patch series.
Change-Id: Iabb075a48d8d1e3e1811afeaad5ab47e7846c972
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13651
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Early UART driver is for bootblock and romstage. It is supposed to be used
when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits
in bootblock requiered for serial to be set up.
Change-Id: I15520d566f107797e68d618885d4379e73d0fa45
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13677
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds the minimal functionality needed to configure SoC pads.
Change-Id: I2e2268eee2b8c822b42a48a95604b0fab86c9833
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13676
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
RVP1 board comes with DDR3 SODIMMs and discrete VRs.
RVP2 board uses LPDDR3 and PMIC.
Change-Id: I3e47c157c49ad55ff1ba824672ac2630a64a6037
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13298
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|