| Age | Commit message (Collapse) | Author |
|---|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: I9db5d80ca0a75ccff3b8e24db0ccbd6b36c84dcb
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add FP enable/disable based on SKU ID for Dratini. This is meant
to resolve a UMA issue with Dratini devices that had the FPMCU
populated on non-fp devices. Since the FPMCU is present, and the
firmware enables the power GPIO's based on variant, not SKU, the
devices were reporting data on fingerprint errantly.
BUG=b:354769653
BUG=b:200825114
TEST=Flash to Dratini, test FP.
Disable test SKU, flash on Dratini, test FP.
To test, run `ectool --name=cros_fp version` in the shell
When enabled, the fpmcu fw version should be displayed.
When disabled, an error should be displayed because the fpmcu
is inaccessible.
Change-Id: Ifc450f51b00b9c3b62268ce94884f5749a3e18c0
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
IORT table represents IO topology of an Arm based system for use
with the Advanced Configuration and Power Interface (ACPI)
Add helper functions for ACPI IORT table for:
1. ITS (Interrupt Translation Service)
2. SMMUV3
3. ID MAP
4. Named Component
5. Root Complex
Based on document: DEN0049E_IO_Remapping_Table_E.e
Change-Id: I7feaf306b5eea21bfc9a2e2a1a2c3ddc3c683c0b
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79404
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit removes the unnecessary layer provided by soc_info.[hc].
It was providing an abstraction which only was resulting in extra
function calls without any added value as the returned constants are
well identified and could be used directly. More importantly, and this
is the actual selling point in my opinion, this extra indirection was
preventing the compiler from detecting array overflows.
BUG=348678529
TEST=Build is successful
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6986
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This isn't required by these boards as they both use PTT.
Change-Id: I66b3f614914e51116f3cabe457205fb6b3528387
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84629
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on 24.04, disabling Turbo Boost increases power consumption
which doesn't align with the aim of the Power Saver profile.
Change-Id: I19e8189ee6c44d19bf222c921429284ed1e1aa2a
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84628
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I68b285ff098127b7becf4aa8736e66fd6b2c4a32
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: Ibb92d76f15be71ecb1e2187c7e235235585f8793
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I5beda22208fe17338d4136f9d38fd50e55054b01
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I140d597750001ad22e2bb1b6971011d2b3bb2bbc
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84272
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Tested on Ubuntu 24.04 by verifying dmesg output and that USB
2.0 and 3.0 devices are registered correctly.
Change-Id: I803a23007f49ea45abc68421e867535081e31b3f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84271
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPTF is not used on this platform so disable the
PCI device.
Change-Id: I763ab948a79e3a020c1b89c69c714dd0d8f54812
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84270
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
These aren't used so remove them.
Change-Id: I6fd33c5242adb93b1251af9c5b11be3734a7aceb
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I6bab0a316ea7d0f7dfbf599e5c08517cee559635
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
MAINBOARD_HAS_TPM2 should only be selected for the boards
that have memory mapped TPMs. The ones that use Intel PTT
don't need it.
Change-Id: I02b5b0912afbd7c4634c208bb17db16d0ac7ba99
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
DPTF is not used on this platform so disable the
PCI device.
Change-Id: I7fa01936568108dd7707a3c2ea7041a1198533b5
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84266
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These aren't used so remove them.
Change-Id: I6b9cf29843047bff9a37f82b899ff1d10b206888
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 24.04
No known issues.
https://starlabs.systems/pages/starfighter-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I046e70845a5201d6f6ab062aee91fa8be9728737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
- This patch update the original google/fatcat support added
with Meteor Lake support as a workaround.
- Add initial support to build google/fatcat for Panther Lake SOC
- Add soc acpi file entry in mainboard dsdt.asl
BUG=b:348678529
TEST=Build google fatcat board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5e
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83419
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GCC-13 introduced the nullptr constant. Use it when compiling with the
C23 standard.
Change-Id: I07db866bebfd25f1a60d18a3228ada2957500234
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83459
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel TXT SINIT required the D_LCK bit set. Although coreboot
tries to set it, the bit ws still clear. The D_LCK bit has to be
set using I/O CF8/CFC cycle.
TEST=Boot Linux with tboot on Protectli VP4670 with Intel TXT enabled
Change-Id: I03aff482b53ab7b0bcaccf18e47ad4c22b53583c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
For platforms without writable PAM-F segment support (e.g. some
simics virtual platforms), put ROM table pointers (e.g. ACPI/SMBIOS
low pointers) into EBDA.
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Change-Id: I2aac74708279813f9a848044d470fdc980ea4305
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being mismatched.
If it's mismatched, the TBT port will timeout.
TEST=Boot starbook/rpl and check TBT 4 dock is correctly identified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3ab68c01f682723dab39870f0676e59ae3d89add
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77567
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On GNR, there are CXL Type-3 memory windows covered under TOHM. The
current 4GB to TOHM DRAM reporting doesn't work on GNR.
Use MemoryMapDataHob to add high RAM resources as a generic
mechanism for GNR and previous generation SoCs.
TEST=Build and boot on intel/archercity CRB
TEST=Build and boot on intel/beechnutcity CRB
(with topic:"Xeon6-Basic-Boot")
Change-Id: Ie5fbc5735704d95c7ad50740ff0e35737afdbd80
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84304
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes the following warning with clang (18.1.6):
src/soc/mediatek/mt8196/gpio_eint.c:259:44: error: '_Static_assert' with no message is a C23 extension [-Werror,-Wc23-extensions]
259 | _Static_assert(ARRAY_SIZE(eint_data) == 293);
| ^
|
Change-Id: I934b6d7ee8e8a0c204a4e328331c3ff3cd0f07de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84618
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for SPI/flash, LPC/eSPI, MCH and
add pci vendor/product description.
References:
* CPU: Linux kernel
* GPU: Linux kernel
* GPU: https://dgpu-docs.intel.com/devices/hardware-table.html
* Intel Atom x6000E Series, and Intel Pentium and Celeron N and J Series
Processors for IoT Applications, February 2023, 636722
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: Ida852f3c991cdd036d9c282f9cabceb23c765e25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75214
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When parsing XIP stages only compare PT_LOAD phdrs. Currently coreboot
stages only use PT_LOAD phdrs.
Change-Id: I305b25032a3c4a9fdefc76cad77fafdb862a604c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I063062d875be61875da136228db06a39bc434833
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The LTE module RW101R-GL provide a hardware pin to enable/disable
WWAN RF function.The function is disabled in default and is
controlled by the AT command.Therefore,set the WWAN_RF_DISABLE
Pin to NC, and it has been pull-high by hardware desgin.
BUG=b:368450447
BRANCH=None
TEST= Build firmware and verify the WWAN on/off function in OS.
Change-Id: I47a28342f67f99c5787077c48a01ddbaa77b5967
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
The method "FUNC" allows 1 argument, so remove the
incorrectly referenced and unused second arguemnt.
This fixes:
ToInteger (Arg1, Local1)
Error 6006 - ^ Method argument is not initialized (Arg1)
Change-Id: If5e402579a2caff169e12253e5d9c2c493902ec7
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
QEMU aarch64 boots to payload when compiled with clang.
Change-Id: I940a1ccf5cc4ec7bed5b6c8be92fc47922e1e747
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74501
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes building inline assembly that uses SIMD registers. This is
for instance the case in the vboot library.
Change-Id: I24fa9d9f81430ea3ecd40de4304a10c6e235fece
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Clang builds slightly larger binaries so increase the section.
The qcsdi is used for an external blob that is currently not in use so
reducing the size is fine for now.
Change-Id: Ide01233f209613678c5408f1afab19415c1071be
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=348678529
TEST=Build successful
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6987
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84607
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes the SoC-specific `FSP_STATUS_GLOBAL_RESET_REQUIRED_X`
Kconfigs, as they are no longer necessary for handling FSP global reset
requests.
Previously, these Kconfigs were used to select a specific 32-bit reset
status code. However, with the introduction of FSP 2.4 and 64-bit
interfaces, the global reset status code can now vary between
architectures.
To address this, the FSP driver now sets the `FSP_STATUS_GLOBAL_RESET`
config to a common default value (depending upon most commonly used
global reset status code) based on the interface:
- 0x40000003 for 32-bit FSP interfaces
- 0x4000000000000003 for 64-bit FSP interfaces
This default can be overridden if an FSP implementation uses a
different status code (for example: Apollo Lake selects different FSP
reset status code as 0x40000005).
By removing the SoC-specific configurations, this change simplifies
global reset handling and ensures compatibility across different FSP
versions and platforms.
Below table shows the relationship between Platform, FSP and FSP Global
Reset Status:
+-----------------+--------------+-------------------------+
| Platform | FSP | Global Reset Status |
+-----------------+--------------+-------------------------+
| Alder Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Apollo Lake | 32-bit | 0x40000005 |
+-----------------+--------------+-------------------------+
| Cannon Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Elkhart Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Jasper Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Meteor Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Sky Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Tiger Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Panther Lake | 64-bit | 0x4000000000000003 |
+-----------------+--------------+-------------------------+
BUG=b:347669091
TEST=Verified FSP requested global reset functionality on google/rex0
(32-bit) and google/rex64 (64-bit) platforms.
w/ 32-bit FSP:
```
(Wdt) AllowKnownReset
[FspResetSystem2] FSP Reset Initiated
FSP returning control to Bootloader with reset required return status
40000003
FSPS, status=0x40000003
FSP: handling reset type, status=0x40000003
GLOBAL RESET!
global_reset() called!
HECI: Global Reset(Type:1) Command
```
w/ 64-bit FSP:
```
(Wdt) AllowKnownReset
[FspResetSystem2] FSP Reset Initiated
FSP returning control to Bootloader with reset required return status 3
FSPS, status=0x4000000000000003
FSP: handling reset type, status=0x4000000000000003
GLOBAL RESET!
global_reset() called!
HECI: Global Reset(Type:1) Command
```
Change-Id: I32bdbf7ea6afa7d5e5f91ea96d887719d26a593f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84572
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
The mock/arch/cache.h file exists for libpayload unit tests. However,
the default implementations (as empty macros) in it make these functions
difficult to mock in unit tests.
Therefore, we follow what's done for mock/arch/io.h, by only including
function declarations in the header. Each test is expected to implement
mocks for these cache functions when required.
Change-Id: Ie4383bf95435fd7d74d624b19b79b5a117cf6d00
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
|
|
The `handle_range` function in `kconfig_lint` was failing to correctly
handle large hexadecimal values (64-bit value) due to limitations with
Perl's handling of standard integers.
This commit modifies the function to use the `bigint` pragma, enabling
it to handle arbitrarily large integers. This prevents issues with
64-bit hexadecimal values and ensures accurate comparisons for range
validation.
Change-Id: I402bb9bec9ba5bfb79b4185f35228c41d4a7b674
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84575
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `fsp_get_pch_reset_status()` function returns a FSP reset status
code. This change corrects its return type from `uint32_t` to
`efi_return_status_t` to ensure consistency with the FSP API and
prevent potential issues caused by type mismatch.
This correction is necessary for compatibility with both 32-bit and
64-bit FSP interfaces. The change also updates all callers of this
function in the Meteor Lake and Panther Lake SoCs to use the correct
return type.
Includes `fsp/api.h` to provide the `efi_return_status_t` definition.
BUG=b:347669091
TEST=Verified global reset functionality on google/rex0 (32-bit) and
google/rex64 (64-bit) platforms.
Change-Id: I0cdee541506bf424f50fd00833d5ee200a3a8a48
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84571
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a Power Resource for Intel Bluetooth, that can reset
the Bluetooth using the delay configured in the DSM.
Change-Id: I3b25fd180e21100e3cb001fc6ba0da7f47b2ad12
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84146
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add "CNMT" Mutex, that will be used by the Bluetooth and CNVi
driver.
Change-Id: I607865458f925d6f4aa713e07cfa34e83b2e5c8f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84598
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It should be in HEX.
Change-Id: I15a354bae414ad94a2f76030b3099179022b935c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84546
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The platform uses eSPI so these are not needed.
Change-Id: I507aa59fcf2540ae6170896a51aa952f5e73eee8
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83691
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SMMSTORE to the default FMAP to allow using UefiPayload on
this board that requires a non-volatile variable store.
TEST: Booted an UEFI compatible OS using EDK2 as payload.
Change-Id: I32fb0a882c62e42da9f3caec54f8d33333fc8598
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84559
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6e578199e7e4ca3a014eecb1eb7a4d9d24893b8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84161
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to define ACPI devices for USB-C ports using UCSI. When
defining the typec configuration do not set mux/retimer information.
cros_ec_ucsi does not support setting USB muxes.
BUG=b:349822718
TEST=emerge-brox coreboot chromeos-bootimage. Boot to OS on brox,
confirmed that there are ACPI devices for each USB-C port and
cros_ec_ucsi correctly matched the ACPI devices ("ls -l
/sys/class/typec" with an update to add an ACPI match table to
the cros_ec_ucsi driver).
Change-Id: Ie7c281fe2a7fab705d3c238dcc4be68c93afd652
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84404
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib4004c1f1b854a54dfdf9eaa7f25583dec947302
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79972
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EBDA (Extended BIOS Data Area) is a memory area below 0xA0000 and
one of the default areas where OS will scan ACPI RSDP pointer from.
coreboot's default EBDA's starting address is 0xF6000, which is in
PAM (Programmable Attribute Map) F-segment's scope. For some platforms
without writeable PAM-F segment (e.g. some simics virtual platforms),
corboot's default EBDA is not writable.
Make DEFAULT_EBDA_LOWMEM, DEFAULT_EBDA_SEGMENT, DEFAULT_EBDA_SIZE
as Kconfig items so that coreboot's EBDA could be relocated to a
writable low memory place.
Change-Id: Icd7ba0c902560f7d498934392685dc2af9c5ce09
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update IRQs according to datasheet/PPR.
source:
PPR #57254 Rev 1.59 Table 137
Change-Id: I843e5e2b01301eb02cb5be347e122cffbe76d80d
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84375
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates the naming scheme used for the GPP bridges.
The naming scheme now matches what we also have on phoenix.
Change-Id: I9f740d75a3561dba2ed65acb16bb4259f632307d
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84378
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I7f4f5406df8ff82b8d3052ff0f370c280967affd
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84319
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
source: PPR #57254 Rev 1.71
Change-Id: I5eaed888109b89c25bcf0ba91abefa7c36c1851b
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84381
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It aligns the names in the datasheet with the one in the code. It also
removes and adds some.
Resource: Document 57254 Chapter 15.3.5
TODO it may very well be that I don't have the full truth, because most
of these register just have a different name and some of these names
like ESPI seem more recent that for example LPC.
Change-Id: Iad848ff400ef80777d0cbb2b582b9b5fa8bf11f3
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Glinda doesn't contain I2C4 and I2C5 like Mendocino it was copied
from. Remove their definitions.
Reference: Document 57254
Change-Id: I676e76aa2309d9ab82d63b48a2dec3c100241131
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add wifi sar for bujia.
BUG=b:345364452
BRANCH=firmware-brya-14505.B
TEST=emerge-brask coreboot-private-files-baseboard-brya coreboot
chromeos-bootimage
Change-Id: I5a67f3723a9dc33793a5cd95f9a3a2596c3c1fc6
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84501
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
GCC with LTO cought this.
Warning:
src/mainboard/google/kahlee/variants/careena/variant.c:44:12: error: 'bid' may be used uninitialized [-Werror=maybe-uninitialized]
44 | if (bid == 7)
| ^
src/mainboard/google/kahlee/variants/careena/variant.c: In function 'car_stage_entry':
src/mainboard/google/kahlee/variants/careena/variant.c:24:18: note: 'bid' was declared here
24 | uint32_t bid;
Change-Id: Ie732b5be5cd9dc0abaf1a5efe023bcb0738dba1d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84206
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot doesn't have a leading zero in gpio < 10.
E.g. G00 -> G0
Change-Id: I4558cec444ae2a081fbc0f49464354df222be6c9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84190
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
After reboot, the system does not need to serve pending IRQ from
systimer. Therefore, clear systimer IRQ pending bits in init_timer().
For that to work, the systimer compensation version 2.0 needs to be
enabled.
TEST=Build pass and timestamp is not reset in ATF and payload
BUG=b:343881008
Change-Id: I520986b81ca153ec3ce56558a80619448cfc0c59
Signed-off-by: Zhanzhan Ge <zhanzhan.ge@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83928
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This should be the sane default, as having this option enabled when the
AT24RF08C (Asset Identification EEPROM) is not present on the mainboard
can cause SMBIOS table entries to become "*INVALID*". This can,
for example, result in strange hostnames when an OS installer uses
SMBIOS information to automatically generate one. On the other hand,
the coreboot generated SMBIOS tables will at least always contain basic
information. Therefore, this driver should be treated as an enhancement
rather than a default.
Currently, the following mainboards have this option disabled:
- ThinkCentre M710s
- ThinkCentre M700 / M900 Tiny
- Haswell ThinkPads
- ThinkPad T440p
- ThinkPad W541
Therefore, we can remove this option entirely on these mainboards. Note
that there may be other mainboards which do not have this chip present
but still have the option enabled. However, this requires a more
detailed investigation which would be out of scope of this change.
TESTS=Timeless builds on lenovo mainboards produce the same binary.
config INCLUDE_CONFIG_FILE
default n
Was temporarily added to `mb/lenovo/Kconfig` during these tests, as
while the configuration does not change, the order of entries do.
Therefore, technically producing a different binary when included.
Change-Id: I5bb101bd6696c39718ee779426d0ec3e721e1b51
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84544
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add two new memory parts
1. K3KL8L80CM-MGCT (Samsung)
2. H58G56BK8BX068 (Hynix)
BUG=None
TEST=Run part_id_gen tool and check the generated files.
Change-Id: I557b359d9e639f6c3fac4239eb28aa7e0bed4c0e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: Ibb167b8dc379ca331812255c3e7e049556f2b57b
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This corrects the mismatch found in the verb tables of Monroe Chromebase
and Link Chromebook.
The verb data was not aligned to a multiple of 4, therefore an entry was
repeated as padding.
This was found due to the `_Static_assert()` from CB:84360 failing.
TEST=Tested on LINK under Linux and Win11, audio working properly under both.
Change-Id: Id377281af310642a6ba77e5a0002ca1dfca38827
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84414
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The verb data was not aligned to a multiple of 4, therefore an entry was
repeated as padding. This has not been tested.
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I3a40e6229419ee7d1a238916ee6d49cf9314f6ab
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84395
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows to configure a default screen rotation in 90-degree
steps. The framebuffer contents will then be displayed rotated,
by the same amount in the other direction; i.e. if you turn the
screen to the left, the picture has to be rotated to the right
to accommodate.
This is only supported by libgfxinit from Skylake / Apollo Lake
on (earlier GPUs didn't support the 90-degree steps anyway) and
it only works with the linear-framebuffer option.
Change-Id: Iac75cefbd34f28c55ec20ee152fe67351cc48653
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
regist*re*s → regist*er*s
Change-Id: Ie5f5cb481f0fac335e592fd3f1f56d5462e37c1e
Fixes: 2b0b2ef9a258 ("soc/intel/common/systemagent: select CAPID_A, BDSM and BGSM by Kconfig")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
IT8613E EC space is divided into 3 banks selectable by EC index 0x06
bits 6:5. Bank0 mostly contains the ITE EC registers known by
coreboot's ITE EC driver. Bank1 contains SB_TSI and PECI temperature
reading registers. Bank2, however, contains additional registers used
to select the temperature source reported in TMPIN reading registers,
PECI bridge registers as well as FAN2-5 controls and extra vectors.
Dump the additional banks using extra-selectors.
Based on non-public IT8613E Preliminary Specification V0.3.
TEST=Perform the IT8613E dump on Hardkernel ODROID H4+.
Change-Id: Ic8fdc56d1b0fbe811e13bc6b800512af654c1cb6
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
Poweroff does not seem to use the ACPI _OFF function, but rather the
smihandler. Creating variant_smi_sleep function for nami to handle
the power off sequence during reboot/poweroff.
BUG=b:364193909
TEST=emerge-brox coreboot
Change-Id: I0108be4e5e7c0265aae0f16fd4e2b7cbe5936112
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84412
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DTT settings according to b:348285763#comment20 in
order to increase the limit of the charging current to 3A.
BUG=b:348285763
TEST=emerge-brox coreboot, and thermal engineer verifies OK.
Change-Id: I24978afd819666f635c85f2be9b71d39e0a39f27
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84527
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify start-up timing for WWAN RW101R-GL to follow spec:
PWR_EN H H H
FCPO# Tpr H H
RESET# L Ton H
Tpr: delay for Power stable (>0ms)
Ton: delay for reset time (>20ms)
BUG=b:349698817
BRANCH=None
TEST= Build firmware and verify on jubilant with RW101R-GL
Measure the start-up timing sequence to meet spec
Boot up in OS, and confirm WWAN can connect to cell site
Change-Id: I7aa3e7a172143ff1cebea7f48bda45d4fb2c77f7
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
If make is ran a second time after an initial clean compile, the entire
rom will be rebuilt. Subsequent calls to make will not rebuild the rom.
This initial rebuild was due to build/util/kconfig/conf being newer than
config.h, and the subsequent rebuild of the header marked everything
else as out of date. The reason conf was newer than config.h is because
it was being treated as an intermediate file [1]. In the rule for
config.h, conf is a prerequisite, but since it is treated as an
intermediate, its rule will not be run if config.h exists and all the
prerequisites of conf (i.e. its source files) are also up to date.
On a clean build after a make menuconfig, config.h exists, satisfying
these conditions. In this case, config.h is treated as being up to date
even though conf does not exist. However, if another target does not
exist and also has conf as a prerequisite, conf will then be built so
that the target can be built. This caused conf to be newer than
config.h, but by default GNU Make deletes intermediate files after a
build which would prevent conf from affecting config.h on subsequent
rebuilds.
However, commit dd6efce934fb ("Makefile: Add .SECONDARY") adds the
.SECONDARY special target, which prevents intermediate files from being
deleted after the build [2]. Thus, conf persists to the first no-op
build, making config.h out of date. Since config.h is updated during
this first rebuild, conf is no longer newer than it, and thus subsequent
no-op builds behave as expected.
Fix this by preventing conf from being treated as an intermediate file
by adding it as a prerequisite of the .NOTINTERMEDIATE special target,
which causes conf to always be rebuilt if it does not exist. Thus, on
the initial clean compile, config.h will be updated after building conf
as a prerequisite, preventing config.h from being marked out of date on
a subsequent rebuild.
[1] https://www.gnu.org/software/make/manual/html_node/Chained-Rules.html
[2] https://www.gnu.org/software/make/manual/html_node/Special-Targets.html
Change-Id: I98c49d47f811e5cceebce7b7d54b282c773734e3
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Many sources include device.h and thus static.h, but many only need the
function declarations and type definitions, not the compiled devicetree
from sconfig. This causes many unnecessary recompiles whenever the
devicetree is updated due to the dependency. Address this by moving the
config_of_soc macro directly into the generated static.h header, as it
seems to be the only line in device.h that actually requires static.h.
For now, static.h remains included in device.h so that the build is not
affected. Subsequent commits will include static.h directly into sources
that actually need it, after which it can be dropped from device.h.
Some statistics for C objects:
Dell Latitude E6400 (GM45/ICH9):
669 total objects
181 depend on static.h
2 require static.h
Dell Latitude E6430 (Ivy Bridge/Panther Point):
693 total objects
199 depend on static.h
3 require static.h
Lenovo ThinkCentre M700 / M900 Tiny (Kaby Lake):
794 total objects
298 depend on static.h
23 objects require static.h
MSI PRO Z690-A (WIFI) DDR4 (Alder Lake):
959 total objects
319 depend on static.h
25 require static.h
The number of objects was determined by grepping the build log for
calls to CC, the number of objects that depend on static.h was
determined by grepping for calls to CC after touching static.h, and the
number of objects that actually require the static.h related lines from
device.h was determined by grepping for objects that failed to build
after removing the static.h lines from device.h and running make with
the --keep-going flag.
Change-Id: I7c40135bf2815093b81e47201c38b7d0a6ac8fa8
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP-M UPDs are programmed according to the configuration (Kconfig and
device tree).
BUG=348678529
TEST=Memory is initialized successfully and hardware is programmed as
desired on Intel pantherlake reference board.
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6988
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84443
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update generated FSP headers for Panther Lake from v2382_01
Changes include:
- Update FspmUpd.h, FspsUpd.h, MemInfoHob.h and FirmwareVersionInfo.h
BUG=b:348678529
TEST=Able to build google/fatcat
Change-Id: Ibe382615db1a7c7a0841d8fe4ae43c226e2c2020
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wifi sar table support for fatcat. Bit 4-5 in CBI/FW_CONFIG
is used to select different sar table (index 0 to 3).
BUG=b:348678529
TEST=emerge-fatcat coreboot chromeos-bootimage
Change-Id: I2d82f76d7c11378ee5c221a6b9621b4cba83720d
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
As https://doc.coreboot.org/contributing/coding_style.html#typedefs
states: "In general, a pointer, or a struct that has elements that can
reasonably be directly accessed should never be a typedef". This
commit makes the Intel Panther Lake SoC code comply with this by using
explicitly `struct soc_intel_pantherlake_config' in the
soc/intel/pantherlake code as I have been suggested to for the
`fsp_params.c' files. The rule being the rule and consistency across
a project matters more than personal preferences.
The documentation lists five exceptions and none on them cover the use
of `config_t' instead `struct soc_intel_pantherlake' but I believe it
does not make the code better for the following three reasons:
1. It is repetitive, make the line longer and the code is in
soc/intel/pantherlake so obviously the config_t data structure is
the pantherlake soc configuration.
2. It makes re-usability from one generation to another unnecessarily
harder.
3. This config_t abstraction is required for and used by some common
block code anyway. Hence, we end-up with some code using `config_t'
and other using the final structure which break the consistency of
the code when the project in looked as a whole.
BUG=348678529
TEST=Google fatcat mainboard compiles
Change-Id: Ibe382615db1a7c7a0841d8fe4ae43c226e2c2021
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Add support for the ODROID-H4 family of boards. Tested on an ODROID-H4+
board, but all of them use the same PCB (with different components).
The four SATA ports on the mainboard are provided by an onboard ASMedia
ASM1064B PCIe-to-SATA bridge. Unlike other mainboards in the tree using
an ASMedia ASM1061 or ASM1062 PCIe-to-SATA bridge, the ODROID-H4+ comes
with a SPI flash chip for the ASM1064B and does not seem to have issues
regarding PCIe power management (e.g. ASPM) or unusable SATA AHCI mode.
The ODROID-H4 comes with a single 16 MiB SPI flash chip. The ODROID-H4+
and the ODROID-H4 Ultra feature Dual BIOS, consisting of another 16 MiB
SPI flash chip and a 3-pin header to select between them. The board can
be flashed internally or using a SOIC-8 clip, but the M.2 slot may need
to be empty for the clip to fit.
Working:
- DDR5 SO-DIMM slot
- All SATA ports on ASMedia ASM1064B PCIe-to-SATA controller
- UART to emit spam
- All video outputs (FSP GOP only lights up one output at a time)
- All USB ports (on the Ethernet connectors and on EXT_HDR1)
- M.2 M connector (PCIe only)
- PCIe power management
- Ethernet NICs
- eMMC
- HD audio codec and display audio
- S3 suspend/resume
- SeaBIOS <current version>
- MrChromebox edk2 <current version>
- Super I/O HWM on Linux (using out-of-tree it87 kernel module)
- Booting Arch Linux from NVMe and SATA
- Booting Windows 10 from NVMe
Not working:
- PECI: undocumented protocol and undocumented Super I/O
- Resuming on Windows 10 BSODs with `VIDEO_TDR_FAILURE`
Untested:
- Fan curves: may need to lower the temperature limits a bit
Change-Id: I7e0d395ba3d15dfcf6d47a222b90499ca371e4eb
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Trulo ISH uses the MAIN FW loaded by the kernel driver. This commit
enables DRIVER_INTEL_ISH_HAS_MAIN_FW for trulo, which skips printing the
ISH BUP version.
BUG=b:360144613
TEST=Local build successful and tested on trulo by toggling the
config. enabling this config skips printing the ISH version in cbmem.
1. CONFIG enabled
```
trulo-rev1 ~ # cbmem -c | grep ISH
[INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin
```
2. CONFIG disabled
```
trulo-rev1 ~ # cbmem -c | grep ISH
[DEBUG] ISH version: 5.4.2.36864
[INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin
```
Change-Id: Ifebd563ec8ddb0378e1215a90396687857f3f71d
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84494
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit introduces a new config DRIVER_INTEL_ISH_HAS_MAIN_FW to
indicate that the Intel Sensor Hub (ISH) is using the ISH MAIN firmware.
The ISH MAIN firmware is located in rootfs, hence we no longer need to
store the ISH BUP version in the CSE partition.
When this config is enabled, fetching the ISH BUP version from the CSE
firmware partition is skipped.
BUG=b:360144613
TEST=Local build successful and tested on trulo by toggling the
config. Enabling this config skips printing the ISH version in cbmem.
Change-Id: I6cacf7b44ce6895ecb96db295d184c7b7d5a872c
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84493
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
BUG=b:348678529
TEST=Able to build google/fatcat.
Change-Id: I5c90aac4873dcc57e65e641656dca3a96f84d6b8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84543
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Source: Document 57254
Change-Id: I9675d45eba257e52d9a870a4cc153b925267f840
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ida2499d9894aa99f341c7a6ef2cd93b3f8ea61fe
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This also updates the mainboards depending on it.
Change-Id: I1138f27bfd47f6fa70a0c2afcc65a5553a609d57
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84376
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add default value in nissa and trulo devicetree.cb, ODM have to review
the board design to follow RDC#646929 Power Map requirement.
NOTE: The VccInAuxImonIccImax remains unchanged w/ and w/o this CL.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST='emerge-nissa coreboot chromeos-bootimage'
Change-Id: Iaedd34757aa6802edcae402e751bc39b9cfe9e0c
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the AST 2600 native graphics init driver to have a working
UEFI firmware menu displayed over KVM.
Change-Id: I2961576077ed3286df080cd09ffe68d835d8c3e7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I4a8b01a661a92630d41837a168e17a0fa3c50f04
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for AST2600 as found on Intel Archer City CRB by using
the code found on Linux's ast drm driver.
While on it do minor modifications found on the Linux drm driver
that also affect the other ast chips.
New log messages:
[INFO ] ASpeed AST2050: initializing video device
[INFO ] ast_detect_chip: VGA not enabled on entry, requesting chip POST
[INFO ] ast_detect_config_mode: Using P2A bridge for configuration
[INFO ] ast_detect_chip: AST 2600 detected
[INFO ] ast_detect_chip: Analog VGA only
[INFO ] ast_driver_load: dram MCLK=890316000 MHz type=3 bus_width=16 size=01000000
[ERROR] No header found
[INFO ] ast_select_mode: Failed to decode EDID
[DEBUG] Assuming VGA for KVM
[DEBUG] AST: Display has 1024px x 768px
[DEBUG] Using framebuffer 1024px x 768px pitch 4096 @ 32 BPP
[INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0x94000000
[INFO ] ASpeed high resolution framebuffer initialized
TEST: Booted on Intel/ArcherCity CRB and used the UEFI firmware menu
over KVM using native graphics init.
Change-Id: I3d2d58d493706673c1b2ba4953967b1641bd6395
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Change-Id: I6e94f44d50f2b53855adc1bb1cd6a1a5d9929003
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Update PCIe Segment, Bus, Device & Function for various IIO bridge
devices.
Change-Id: I01d164cf0717b3e817348e64e32478c2bb11a8b8
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
This commit drops tcss_d3_hot_disable chip config as FSP is not
exposing the same purpose UPD anymore starting with Panther Lake
SoC.
BUG=b:348678529
TEST=Build for fatcat
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d58
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Change-Id: I93912fa3a3e247fe5da2b2ac3ffa02a9d3dbb02a
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Updating from commit id c5b8de86c:
2024-07-22 18:07:11 +0200 - (Merge "feat(debugv8p9): add support for FEAT_Debugv8p9" into integration)
to commit id 8fb91783f:
2024-08-23 14:45:12 +0200 - (Merge "fix(intel): add in missing ECC register" into integration)
This brings in 213 new commits.
Change-Id: Ib52672e949a8e57fafc1ee9ae965a752020932b2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The declarations describing interface functions between SoCs
and openSIL glue code are common for the stub and Genoa POC,
and likely with future SoC openSIL implementations. Therefore,
move these out of SoC-specific header files and into
vc/amd/opensil/opensil.h.
This change facilitates swapping out the stub for the actual
openSIL glue code.
Change-Id: Icc8783ddb868f9f0c4cd357245604313eadfe531
Signed-off-by: Nicolas Kochlowski <nickkochlowski@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84428
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For next DVT build, hw adds this power ctrl.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery not present, increase PL4 limit from 9 to 40.
Get PL setting from internal thermal and power team.
AC+DC/DC:
PL1=15W
PL2=25W
PL4=114W
AC ONLY:
PL1=15W
PL2=25W
PL4=40W
BUG=b:355094551
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Confirm on lotso EVT board, as expected.
Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:342929824
BRANCH=None
TEST=boot to kernel success
Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use ALC256 as HDA codec on fatcat hence, added the verb table.
BUG=b:348678529
TEST=Tested audio playback using HDA ALC256 codec on PTL reference
board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d55
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84409
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:348678529
TEST=Memory training is successful on google fatcat board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d51
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84406
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit updates the fatcat mainboard to use the Panther Lake SoC
instead of Meteor Lake.
The changes include:
- Selecting the `SOC_INTEL_PANTHERLAKE_U_H` config option.
- Updating the `mainboard_update_soc_chip_config()` function to use the
`soc_intel_pantherlake_config` struct.
- Updating the devicetree to use the `soc/intel/pantherlake` chip.
- Updating variant header files to reflect the SoC change.
This update enables support for the Panther Lake SoC and its
features on the fatcat mainboard.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie0c6257dfb9dd1f627472ad220614f9b24c911ef
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84537
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit removes the virtual GPIOs for recovery and write protection
from the fatcat variant.
These GPIOs are not utilized on the fatcat platform, and their removal
simplifies the GPIO configuration and improves code readability.
The `CROS_GPIO_DEVICE_NAME` macro is no longer applicable for Panther
Lake SoCs. Future changes will introduce a suitable GPIO device name
that meets the requirements of Panther Lake.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I492fec28637edb2f84e9290b28dabce3f23aa867
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84536
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the SOC_INTEL_COMMON_BASECODE_RAMTOP Kconfig option for the
google/vell mainboard. This option ensures improving the boot time
on google/vell by 40ms in an average.
BUG=b:352330495
TEST=Able to reduced google/vell boot time by 40ms.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iedfd346c62b1ac79796042dd3569d846007b8f10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
When compiling with the C23 standard, bool, true, and false are
pre-defined by the language, so defining them in stdbool.h isn't allowed.
This fixes the following error:
src/include/stdbool.h:6:17: error: two or more data types in declaration specifiers
6 | typedef _Bool bool;
| ^~~~
src/include/stdbool.h:6:1: error: useless type name in empty declaration [-Werror]
6 | typedef _Bool bool;
| ^~~~~~~
Change-Id: Iec9b4e3f308008ece773ce3460daff97370161ea
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
