| Age | Commit message (Collapse) | Author |
|---|
|
Tested under abuild, causes no trouble.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Robert Millan <rmh@aybabtu.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4034 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4033 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
There are a few changes. The 20K bootblock size restriction is gone.
ROMFS has been tested and works on v2 with qemu and kontron. Once this
patch is in, those patches will follow.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4032 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This is a BCM5785 based machine, WP# and TLB# need to be deasserted using
GPIO 2 and 5 from the PM registers of the southbridge.
This is very similar to the x3455 implementation.
Signed-off-by: Mondrian Nuessle <nuessle@uni-hd.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4031 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
memory must be clear with 0s because otherwise the resources of K8 will be
totally messed up.
res = probe_resource(dev, 0x100 + (reg | link));
This is called with dev = NULL and this is no good for probe_resource at all.
The attached patch fixes the potential problems and of course the problem
itself. On one particular place was missing test if the device really exists.
This was copied to fam10 and perhaps the same issue is in v3 (DID NOT check).
The rest of the patch is just very paranoid and do all checkings.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Myles Watson <mylesgw@gmail.com>
--This line, and those below, will be igno
red--
M src/devices/pci_ops.c
M src/northbridge/amd/amdk8/northbridge.c
M src/northbridge/amd/amdfam10/northbridge.c
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4030 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Add missing contributor in README.
- Cosmetic fixes.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
9fh for RB/BL/DA Rev C;
96h for DR Rev B.
Signed-off-by: Zeng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
as "driver" instead of "object" in order to get the init code actually
executed.
This patch fixes up all northbridges that did not do this before.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
strtoul() conversion result.
Thanks to Mart for finding and reporting the problem!
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4026 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreboot to 1MB and tries to cache whole range for XIP. The UMA part colide a
bit with the HAVE_HIGH_TABLES region. I solved that by relocation of the region.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4025 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreboot to 1MB and tries to cache whole range for XIP. The UMA part colide a
bit with the HAVE_HIGH_TABLES region. I solved that by relocation of the region.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4024 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The bug is in src/arch/i386/boot/boot.c. The inline assembly in
jmp_to_elf_entry uses the "g" flag to pass in parameters. However,
"g" allows gcc to use stack relative addressing of parameters.
Easiest fix would be to change "g" to "ri" - put the parameter either
in a register or as an immediate value.
That's what this patch does.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The one issues is the SPD address switch for the second CPU. That means that
the memory must be an exact match on each CPU.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4021 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
the struct to the individual struct members to improve readability.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4020 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
In file included from coreboot-v2-4017//src/arch/i386/boot/pirq_routing.c:2:
coreboot-v2-4017/src/arch/i386/include/arch/pirq_routing.h:45:5: warning: "PIRQ_ROUTE" is not defined
coreboot-v2-4017//src/arch/i386/boot/pirq_routing.c:103:6: warning: "PIRQ_ROUTE" is not defined
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4019 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
specific clock.c. Since no other target uses the same cpu, I commented out the
CPU's clock.c.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4018 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
one yabel is running for is possible
Signed-off-by: Pattrick Hueper <phueper@hueper.net>
Tested and Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4017 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4016 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4015 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
targets.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4014 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Some bootloaders seem to overwrite memory starting at 0x600, thus destroying
the coreboot table integrity, rendering the table useless.
By moving the table to the high tables area (if it's activated), this problem
is fixed.
In order to move the table, a 40 bytes mini coreboot table with a single sub
table is placed at 0x500/0x530 that points to the real coreboot table. This is
comparable to the ACPI RSDT or the MP floating table.
This patch also adds "table forward" support to flashrom and nvramtool.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4013 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Some bootloaders seem to overwrite memory starting at 0x600, thus destroying
the coreboot table integrity, rendering the table useless.
By moving the table to the high tables area (if it's activated), this problem
is fixed.
In order to move the table, a 40 bytes mini coreboot table with a single sub
table is placed at 0x500/0x530 that points to the real coreboot table. This is
comparable to the ACPI RSDT or the MP floating table.
This patch also adds "table forward" support to flashrom and nvramtool.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4012 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Some bootloaders seem to overwrite memory starting at 0x600, thus destroying
the coreboot table integrity, rendering the table useless.
By moving the table to the high tables area (if it's activated), this problem
is fixed.
In order to move the table, a 40 bytes mini coreboot table with a single sub
table is placed at 0x500/0x530 that points to the real coreboot table. This is
comparable to the ACPI RSDT or the MP floating table.
This patch also adds "table forward" support to flashrom and nvramtool.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4011 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
DSDT and use the dynamic TOM2 variable instead.
- The DSDT needs to be revision 2 or above to handle 64 bit variables.
This will require a recent (not older than 2007) iasl (ACPI compiler).
- Fix an incorrect comment.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: <stepan@coresystems.de>
Acked-by: <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4009 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4008 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
code expecting too old binutils(?).
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4007 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4006 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4005 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Pattrick Hueper <phueper@hueper.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4004 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4003 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
address of the RTC is 0x70, you need to write 0x400 to it. Now the dump from
superiotool matches the factory except 0xf0 of the keyboard. When you boot with
the factory BIOS that is 0x04, but with coreboot it is not set.
It's trivial because it is reverts.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
directories and use the global (v3) one in util/x86emu instead. It also fixes
the breakage introduced by 4000
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4001 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few
include files and missing prototypes. Also, fix up the Config-abuild.lb files
to properly work for cross compiling.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3999 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- lots of PCIe updates
- various bug fixes to early init
- some fixes for typos and warnings
- initial support for PCIe x16
- some minor fixes to memory init code
- some subsystem vendor id patches, to be consistent with ICH7
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add support for clang's scan-build utility to abuild. scan-build wraps
the compiler and runs its own compiler on the same sources to do some
static analysis on them. It adds an option "-sb" or "--scan-build" that
creates a coreboot-builds/$target-scanbuild directory for every $target,
containing the output of scan-build, which is a HTML documentation on
its results.
Be aware, that scanbuild significantly increases build time: A board
that takes 6-7 seconds normally requires 60 seconds with that option
enabled on my test system.
The patch also moves the stack-protector option down a bit, so it
applies to crosscompiled targets, too (which overwrote the compiler
settings before)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3996 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Create a variable "GCC", which defaults to the content of CC, but allows
the user to provide a gcc to use in this instance, even when normally a
different tool is chosen. That helps with scan-build (see next patch),
and might help with distcc, ccache etc, too.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3995 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The rules changed in this patch originally wanted to write c_start.o
into the source tree. That triggered a bug in my other work, and is
generally not what we want.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* ACPI updates: MCFG, HPET, FADT
* some mptable fixes for certain riser cards
* Use Channel XOR randomization
* Fix SuperIO HWM setup
* Enable all three network adapters
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- add configure only mode to easily and quickly check Config.lb and Option.lb
files
- fix up cross compiler handling
- don't use in-place sed, not all sed versions can do it
- use perl instead of date to avoid non-gnu date trouble
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
be required for a series of later patches. Roughly it contains:
* fixed SMBus driver (was not compiled in before)
* fixed S-ATA/P-ATA combination
* Added warnings to drivers being called with a NULL dev->chip_info
* Set subsystem ids for those boards that have none specified in Options.lb
* Fix license headers. The code was originally released under GPL v2 but
some files sneaked in with a v2 or later header.
* some attempts to fix azalia/Intel HDA.. not working yet
* clean up and fix pci bridge handling code
* Add Config based GPI handling to LPC driver
* Add HPET enable function
* Enable clock gating where appropriate
* first attempt at USB debug console support (not working yet)
* Add required options to kontron board
* many other minor changes
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3990 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
a problem with IRQ 9, but besides that Linux is happy. BSOD in Windows still.
changes by file:
src/mainboard/tyan/s289X/Options.lb:
Add options and defaults for ACPI tables and resources.
src/mainboard/tyan/s289X/mainboard.c:
Add high_tables resource ala Stefan's code for the Kontron.
src/mainboard/tyan/s289X/acpi_tables.c:
Fill out the ACPI tables, using existing code where possible.
Only the madt is different between the boards, to be combined later.
src/mainboard/tyan/s289X/Config.lb:
Compile in acpi_tables.c and dsdt.dsl.
Turn on the parallel port and the real-time-clock.
src/mainboard/tyan/s289x/dsdt.dsl:
The board layout (thanks Rudolf) and interrupts from mptable.c
src/mainboard/tyan/s289x/mptable.c:
Minor formatting changes to make them diff better.
src/superio/smsc/lpc47b397/superio.c:
Correct the size of the real-time-clock so it can be where it belongs.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3989 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
changes by file:
src/northbridge/amd/amdk8/northbridge.c:
Add high tables code ala Stefan's code for the i945.
src/southbridge/nvidia/ck804/ck804_lpc.c:
Enable High Precision Event Timers.
Add pm_base for ACPI.
src/southbridge/nvidia/ck804/ck804_fadt.c:
Since fadt is only dependent on the Southbridge, add it here.
src/southbridge/nvidia/ck804/Config.lb:
Compile in ck804_fadt.c
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3988 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
whitespace differences between this file and the amdk8_util.asl from
asus/m2v_mxe.
It also enables SLIT filling if you have one, zeroes the unused fields in the
srat_lapic structure, and adds some declarations in acpi.h.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3986 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Fix bash script type.
Removed const return type on msraddrbyname() to fix gcc warning/error.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
attempt trickery, we can simply rename the accessor functions.
Patch created with the help of Coccinelle.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <idwer_v@hotmail.com>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3984 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The microcode is from Intel's Linux microcode file, so it's unproblematic.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3983 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* move mainboard dependent code into a mainboard SMI handler.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
horribly broken and thus never used by any platform. This needs to get
straightened out so current chipsets drivers can use the full feature set.
Create wrapper functions similar to the io pci config space ones.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3980 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3979 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
substring is at the end.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
doesn't make no sense. (trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3977 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
warnings (trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3975 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
spotted assignments to volatile variables which were neither placed
inside the mmapped ROM area nor were they counters.
Due to the use of accessor functions, volatile usage can be reduced
significantly because the accessor functions take care of actually
performing the reads/writes correctly.
The following semantic patch spotted them (linebreak in python string
for readability reasons, please remove before usage):
@r exists@
expression b;
typedef uint8_t;
volatile uint8_t a;
position p1;
@@
a@p1 = readb(b);
@script:python@
p1 << r.p1;
a << r.a;
b << r.b;
@@
print "* file: %s line %s has assignment to unnecessarily volatile
variable: %s = readb(%s);" % (p1[0].file, p1[0].line, a, b)
Result was:
HANDLING: sst28sf040.c
* file: sst28sf040.c line 44 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 43 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 42 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 41 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 40 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 39 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 38 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 58 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 57 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 56 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 55 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 54 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 53 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
* file: sst28sf040.c line 52 has assignment to unnecessarily volatile
variable: tmp = readb(TODO: Binary);
The following semantic patch uses the spatch builtin match printing
functionality by prepending a "*" to the line with the pattern:
@@
expression b;
typedef uint8_t;
volatile uint8_t a;
@@
* a = readb(b);
Result is:
HANDLING: sst28sf040.c
diff =
--- sst28sf040.c 2009-03-06 01:04:49.000000000 +0100
@@ -35,13 +35,6 @@ static __inline__ void protect_28sf040(v
/* ask compiler not to optimize this */
volatile uint8_t tmp;
- tmp = readb(bios + 0x1823);
- tmp = readb(bios + 0x1820);
- tmp = readb(bios + 0x1822);
- tmp = readb(bios + 0x0418);
- tmp = readb(bios + 0x041B);
- tmp = readb(bios + 0x0419);
- tmp = readb(bios + 0x040A);
}
static __inline__ void unprotect_28sf040(volatile uint8_t *bios)
@@ -49,13 +42,6 @@ static __inline__ void unprotect_28sf040
/* ask compiler not to optimize this */
volatile uint8_t tmp;
- tmp = readb(bios + 0x1823);
- tmp = readb(bios + 0x1820);
- tmp = readb(bios + 0x1822);
- tmp = readb(bios + 0x0418);
- tmp = readb(bios + 0x041B);
- tmp = readb(bios + 0x0419);
- tmp = readb(bios + 0x041A);
}
static __inline__ int erase_sector_28sf040(volatile uint8_t *bios,
It's arguably a bit easier to read if you get used to the leading "-"
for matching lines.
This patch was enabled by Coccinelle:
http://www.emn.fr/x-info/coccinelle/
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Joseph Smith <joe@settoplinux.org>
--
http://www.hailfinger.org/
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3973 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
with nonzero PCI bus operations, get_pbus() will get stuck in a silent
endless loop.
Detect the endless loop and break out with an error message.
Such a situation can happen if the device tree is not yet
initialized/walked completely.
This fixes the unexplainable hang if pci_{read,write}_config{8,16,32}was
used in early mainboard code for the AMD DBM690T. Instead, the code will
now die() with a meaningful error message.
Thanks to Ward Vandewege for testing my patches to track down that bug.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3972 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Right now we perform direct pointer manipulation without any abstraction
to read from and write to memory mapped flash chips. That makes it
impossible to drive any flasher which does not mmap the whole chip.
Using helper functions readb() and writeb() allows a driver for external
flash programmers like Paraflasher to replace readb and writeb with
calls to its own chip access routines.
This patch has the additional advantage of removing lots of unnecessary
casts to volatile uint8_t * and now-superfluous parentheses which caused
poor readability.
I used the semantic patcher Coccinelle to create this patch. The
semantic patch follows:
@@
expression a;
typedef uint8_t;
volatile uint8_t *b;
@@
- *(b) = (a);
+ writeb(a, b);
@@
volatile uint8_t *b;
@@
- *(b)
+ readb(b)
@@
type T;
T b;
@@
(
readb
|
writeb
)
(...,
- (T)
- (b)
+ b
)
In contrast to a sed script, the semantic patch performs type checking
before converting anything.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
Tested-by: Joe Julian
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3971 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
triggered by the AMD 690/SB600 targets.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3970 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3969 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The attached patch fixes this. I did not spotted that because the return arg is
moved just outside of method and I have overseen the closing }
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3968 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
sense, too). Have one u64 instead of three.
In order to use the old bios emulator, you have to do nothing. (Default, if
CONFIG_PCI_ROM_RUN is enabled)
In order to use yabel in your target, you need to add the following lines to
your config:
uses CONFIG_PCI_OPTION_ROM_RUN_YABEL
default CONFIG_PCI_OPTION_ROM_RUN_YABEL=1
In order to use vm86 in your target, you need to add the following lines to
your config:
uses CONFIG_PCI_OPTION_ROM_RUN_VM86
default CONFIG_PCI_OPTION_ROM_RUN_VM86=1
Note: vm86 only works on platforms with _RAMBASE in the lower megabyte.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
a long time ago. This will make it easier to port v2 boards forward to v3 at
some point (and other things)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3963 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
caused same filenames to still cause objects being dropped from the build list
- which was the whole purpose of the patch.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
similar to what v3 does. This is required to have two source files with
the same name but in different directories. (As in, two different SuperIOs on
board, with a superio.c each)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3961 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(in addition to their low locations)
This adds the kontron 986LCD-M and the i945 as a sample.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3960 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
table to read. Otherwise you never know what you'll get from the factory BIOS. There are probably more, but these are the ones compiled into the s2895.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
libpayload uses -Werror for some reason right now, and the
variable 'c' in curses_getchar is only used if CONFIG_USB_HID
or CONFIG_PC_KEYBOARD is defined, giving an unused variable
warning that gets promoted to an error.
So wrap the variable declaration around appropriate #ifdef's
Signed-off-by: Mart Raudsepp <leio@gentoo.org>
Acked-by: Ulf Jordan <jordan@chalmers.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3957 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Report by Holger Mickler. Thanks!
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3956 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
removes the ugly binary DSDT patching and all other related stuff. Stick to
infrastructure in previous patch.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and
mainboard_$VENDOR_$BOARD_config to mainboard_config.
Ron's part:
The config change that makes the naming change not break every build.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add TOM2 to the K8 DSDT.
Thanks to Rudolf Marek for testing and fixing this patch.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3952 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
K8 and Fam10+ CPUs.
What this patch does:
1. Enable SSE (to get some more registers to play with)
2. Determine CPUID, and stash it in an XMM register, and reference
value for comparison in another XMM register (mangled somewhat to
simplify inequality comparisons)
3. Add a macro jmp_if_k8, which jumps if the CPU is K8
(using an SSE compare)
4. Replace #if CAR_FAM10 sections with runtime checks using jmp_if_k8.
This is pretty mechanical work. The macro uses local labels
(1: and 2:) to prevent namespace issues
5. At one time, CPU_ADDR_BITS is used to fill a register. This is
replaced with hardcoded values for both cases, and switched
appropriately.
6. Disable SSE
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3951 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3950 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- make uma_memory_base and uma_memory_size uint64_t as they may be 64bit BARs
on some platforms.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Bellongs to r3947
Following patch adds dynamically generated P-States infrastructure as well as
M2V-MX SE as example how to do that. It is based on AMD code and mine code for
ACPI generation.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Following patch adds dynamically generated P-States infrastructure as well as
M2V-MX SE as example how to do that. It is based on AMD code and mine code for
ACPI generation.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
M2V-MX SE as example how to do that. It is based on AMD code and mine code for
ACPI generation.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3946 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The company is dead.
It causes builds to fail, and that is not a problem we need to have.
Removing it to remove the problems it causes.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
sections.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3944 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
If high SMM memory is used (and needs to be uncached for whatever reason; it
shouldn't in my opinion), we should do it the same way.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3942 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3941 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3940 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
clause.
An ITE87427 Super I/O does not exist. Use the real name (IT8712F) of
the chip on the DBM690T board.
Use decimal values for KELV, THOT and TCRT on the Pistachio board for
better readability.
Tested by Maggie Li on DBM690T and Pistachio.
Tested by Carl-Daniel Hailfinger on Asus M2A-VM.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3939 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Fix reference to documentation.
Use __FUNCTION__ instead of hardcoding function names in printk
messages.
No functional changes.
I'm slowly getting to the point where adding another RS690 board is
really easy and needs almost no changes to the existing target.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3936 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Bayou must link with its own ldscript to end up at a load address that
doesn't interfere with payloads. Make Bayou's ldscript MB compatible, so
the link with libpayload/lib/i386/head.o succeeds.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3935 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
