| Age | Commit message (Collapse) | Author |
|---|
|
The board id assignment CL (CB:56642) landed after
BOARD_GOOGLE_HEROBRINE has been deprecated to
BOARD_GOOGLE_HEROBRINE_REV0 (CB:60284). Fix it to accomodate for the
GOOGLE_HEROBRINE_REV0 board updates.
BUG=b:211644878
BRANCH=None
TEST=built all variants of herobrine to make sure it compiles.
For reference:
=============
CB:56642:
commit 8b63dac06184e56ce40d82d982e983ac79163551
Author: Ravi Kumar Bokka <rbokka@codeaurora.org>
Date: Tue Jul 27 19:29:18 2021 +0530
google/herobrine: configure gpio to detect board ID
=============
CB:60284:
commit 8bdbe23a93008597d99472747ba3415617f8c074
Author: Shelley Chen <shchen@google.com>
Date: Tue Dec 21 13:17:33 2021 -0800
mb/google/herobrine: Transition BOARD_HEROBRINE to BOARD_HEROBRINE_REV0
=============
Change-Id: I6dab994e65eadff303eb88a63b8dd81e19694678
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update tx/rx term control to 3 for passing USB3 port 0/1 SI.
b:199468920
TEST= emerge-guybrush coreboot; build and pass USB3 SI.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I637207d7c657f6dd71d70694f9a5fb35f8294b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Similar to commit 0167f5adb (mb/google/redrix: Add _HID for privacy
screen device), add the same _HID to the privacy screen device.
Change-Id: I58ad538dfaf602e3f4afb98d1a25d52753a15d93
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Add minimal Device entries with just an _ADR for each of the PEG ports
for P and M chipsets (N does not have any PEG ports).
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id1009004969729eddf7005fa190f5e1ca2d7b468
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PMC IPC method used to enable/disable PCIe srcclks uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I5e9710f0d210396f9306b948d9dce8b847300147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PMC IPC method used to enable/disable PCIe clk sources uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7aa14a634dcd90c4817009db970fb209ae02c63d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Do initial memory support for project agah
BUG=b:210970640
TEST=FW_NAME=agah emerge-brya coreboot
Change-Id: Iaeea12a9dd8110a499b5df4de89dc1f74b88a580
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the CL was merged: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3354766.
Update to matched id for audio work normal.
1019 id changed to 10EC1019:0/10EC1019:1 from 10EC1019:1/10EC1019:2.
BUG=b:210542422
TEST=emerge-guybrush coreboot chromeos-bootimage; Download image 14425 and tested audio function.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I542f886fe63205777837d7146169177b043cc5f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Create the agah variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:210970640
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_AGAH
Change-Id: I6adcf4e8010969cf185513d68bb1b76ea08194c7
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Don't perform GPP lock configuration if
SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS config is not selected.
This patch fixes a compilation issue when APL/GLK boards are
failing while gpio_lock_pads() function is getting called from
IA common gpio block.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I392dc2007dba8169e480f82b58b7f0a1578bb09f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch modifies struct pad_config.pad type from `int` to 'gpio_t'
as pad offset inside GPIO community is unsigned type and also to
maintain parity with `struct gpio_lock_config.pad` type.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I15da8a1aff2d81805ba6584f5cc7e569faf456e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch renames struct gpio_lock_config variable `gpio` to `pad`,
to represent the pad offset within the GPIO community.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6bed99c401435c96c9543f99406a934d7141c575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO
reset types in Alder Lake as below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- RSMRST for GPD/Reserved for GPP - (Value 11)
Hence, created two different reset types for `GPP` and `GPD`.
Also, replaced PAD_CFG0_LOGICAL_RESET_x macros with PAD_RESET().
BUG=b:213293047
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4b8742c7a0cc1dc420e3e22e34a16355294ed61b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current CBFS mcache size (roughly 7KiB) is insufficient for mt8186,
so we need to increase it by 1KiB (and decrease the stack by 1KiB).
Error logs:
CBFS ERROR: mcache overflow, should increase CBFS_MCACHE size!
CBFS: mcache @0x0010e004 built for 63 files, used 0xde4 of 0xdfc bytes
BUG=b:202871018
TEST=no cbfs error logs.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1e627ede3774665575006f752f89101e3c5bde9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60529
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According schematics, we configure audio by turning on setting of
audio power and selecting I2S pin-mux.
Schematics references:
kingler: schematic_kingler_proto0_gerber_20211115.pdf
krabby: crab_proto 0_20211112_final.pdf
BUG=b:204164695
TEST=Verified by CLI command(badusbbeep/devbeep) on kingler and krabby
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Change-Id: Ia6374d0e5535b7cff4df8759312786fef8b94b6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:204523176
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ieef638f78edd3428e572a76f06fb9c8757278971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Since fw config fields for DB_SD can share the same driver, we will
remove the duplicate fields DB_SD_GL9750 and DB_SD_RTS5232S.
BUG=b:212240358
TEST=emerge-brya coreboot and can boot to OS.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: If7814c35f63fd6fa27195d448c4d51fc980aaa9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The VBT is extracted from Chromium OS in developer mode with the device
running firwmare .
$ sudo dmesg | grep ' DMI:'
[ 0.000000] DMI: Dell Inc. Sarien/Sarien, BIOS Google_Sarien.12200.99.0 07/29/2020
$ sudo cbmem -1
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 bootblock starting (log level: 8)...
[…]
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 ramstage starting (log level: 8)...
[…]
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 614c0 size 4a0
Found a VBT of 4608 bytes after decompression
[…]
$ sudo cp /sys/kernel/debug/dri/0/i915_vbt vbt.bin
Using the Chrome OS recovery image, Matt DeVillier verified, that the
Sarien VBT is identical to Arcada, so add the VBT for all variants.
Change-Id: Ibab8a7b0b3f721ca434ac38b51528b81e66f3bb7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I0410be48f360bdd00e4ed7599cbee405915344b9
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove display from devicetree as Intel's brightness
controls are not used on this platform.
This solves the below errors appearing in dmesg:
No Local Variables are initialized for Method [_BCL]
No Arguments are initialized for method [_BCL]
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Icf2f2fa33abd11952c888c9502d1d5ef1ad6544f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I5449feeb65c49c79bc7657a1c3777a0f128a13b1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<"
Change-Id: Iefb37d28c7f13563fa652cd6b2f661f462a3a32e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Id8e6221a9801d5198171dc9cd564000d19720a42
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I414ad3824819f441f316567795999ed9539cba7b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Found using:
diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<"
Change-Id: If7751b0e7d222979973518f57b310f5e2fe2bc25
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I8f88541dce457e978a2cbea036d4f6eae387963f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ibd3e7a62a2e833017f550eddd915b7dfb539d019
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iba3135178f2d6021702971e4d887e9b4f8afeb76
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Idc0cd9d6865cd9c1b95e6c838795cce9dbc643a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using following command:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/)
Change-Id: Iae90ff482f534d8de2a519619c20a019d054e700
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Found using following command:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/)
Change-Id: I2a6c5b67af1d2544159e92d4b8c06cc1f5504bd2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
After checking them against schematics, a few unused GPIOs that were inherited
from the baseboard were missed, so this CL programs them as PAD_NC.
GPP_B2 => non-use
GPP_B15 => non-use (for FPR)
GPP_D3 => non-use (Test point)
GPP_E21 => non-use (for LCLW Detect)
BUG=b:211721639
TEST= USE="project_primus" emerge-brya coreboot
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I4e269bc6fb6eda7b2de57e1a9c900864d3e86e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Touch screen IC couldn't wake up after rebind with current 120 ms delay
after reset since the HID would be activated after 200 ms from reset.
This change increases the reset_delay_ms for touch device to 200 ms to
wait for the touch HID to be ready.
BUG=b:204950000
BRANCH=dedede
TEST=Verified that TSP IC could wake up after rebind
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I34cbc82e2d691266389d498e77d8389cdee23efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
More Brya variants like Anahera and Primus have migrated to use
Alder Lake QS SoC which enables eNEM feature by default. Hence,
select eNEM for CAR by default for these variants.
BUG=b:168820083
TEST=Able to build and boot primus variant using eNEM mode.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I65d12de08adf85140976e1a7659ad7b684aa75c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for Samsung K4U6E3S4AA-MGCR.
BUG=b:211950312
TEST=emerge-dedede coreboot
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Change-Id: Ic436db8fe3ef6fb8379ec629b128c05c691ea6fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Fix compilation issue introduced with commit 8b63dac0
(google/herobrine: configure gpio to detect board ID) by initialising
the gpio pins.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I084fec777b56f402efb3b04a1d358cd5b0891846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4d7324148ba182d0317b1f64e39f04a8a55fe79b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
BUG=b:182963902, b:193807794
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I6de2a7e7b11ecce8325e0fd44dc7221d73729390
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
After removing GDB from crossgcc in commit f32eed16 (buildgcc: Remove
GDB from crossgcc), there is no target named all_without_gdb anymore
and we should always build crossgcc with target all.
But in util/docker/Makefile, we still try to build crossgcc with
target all_without_gdb as default and will cause a build failure.
Set CROSSGCC_PARAM from all_without_gdb to all to fix this issue.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I06c6d8e36dfd4e6a00ddec8b640b608ab1ba614c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Deprecating Herobrine Rev0 board. The next board is very different
from the Rev0 board (ie: Most GPIOs have been remapped). Deprecating
and reusing the GOOGLE_BOARD_HEROBRINE Kconfig for next board and
reslotting the old GOOGLE_BOARD_HEROBRINE source under
GOOGLE_BOARD_HEROBRINE_REV0 config. Want to keep the code around in
case somebody needs it but we can remove this code in future after we
recall all the Rev0 devices. Also updating the remapped GPIOs to
match those of the current herobrine board.
BUG=b:211644878
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I67a0b282710031b927ce9022c7c535bd8d4ca1aa
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Kano has non-stylus sku. Add a FW_CONFIG field to indicate
stylus presence and add a probe statement to the devicetree for the
corresponding device.
BUG=b:208179467
TEST=non-stylus doesn't register garage driver.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24839c39280185a6d649a82dd9f025ee305c2eed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set GPP_D16 (PEN_PWR_EN) to output high.
BUG=b:195853169
TEST=build pass.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I25b6d1a40ed0939b303a03984cb0087fb6cab4d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add a new baseboard for nissa, an Intel ADL-N based reference design.
Also, add variants for the two reference boards, nivviks and nereid.
This commit is a stub which only adds the minimum code needed for a
successful build.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I2a3975fb7a45577fec8ea7c6c9f6ea042ab8cba5
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Taeko will use two PCIE port signals with one slot, one CLK and one
CLKREQ at next build. In order to accommodate this, probe statements
are added to the devicetree. This only affects NVME SSD and EMMC.
BUG=b:211914322
TEST=Build FSP with debug output enabled, and observe the correct root
ports being initialized depending on the FW_CONFIG values for BOOT_EMMC
and BOOT_NVME.
Cq-Depend: chromium:3358662
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I4486f23ea02374c84a9b1ce04f568d78aeabd573
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I5f2710b2034882a24a041d99e37ec364193d85e6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I4eac157c8b48c1c10178bb84822b6462c245deca
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Building an image for the Purism Mini v2 with `x86_64-linux-gnu-gcc-11`
fails with the format warning below as the size of size_t differs
between 32-bit and 64-bit.
CC ramstage/soc/intel/common/block/acpi/pep.o
src/soc/intel/common/block/acpi/pep.c: In function 'read_pmc_lpm_requirements':
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:62: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
src/soc/intel/common/block/acpi/pep.c:57:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
57 | printk(BIOS_ERR, "Failed to retrieve LPM substate registers"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~
| |
| size_t {aka unsigned int}
src/soc/intel/common/block/acpi/pep.c:58:71: note: format string is defined here
58 | "from LPM, substate %lu, reg %lu\n", i, j);
| ~~^
| |
| long unsigned int
| %u
The variables `i` and `j` are of type size_t, so use the corresponding
length modifier `z`.
Fixes: 2eb100dd ("soc/intel/common/block/acpi: Add LPM requirements support to PEPD _DSM")
Change-Id: I27bce0a6c62b1c1ebbca732761de2f59b042a5d4
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Building an image for the Purism Mini v2 with `x86_64-linux-gnu-gcc-11`
fails with the format warning below as the size of size_t differs
between 32-bit and 64-bit.
CC ramstage/soc/intel/common/block/irq/irq.o
src/soc/intel/common/block/irq/irq.c: In function 'assign_fixed_pirqs':
src/soc/intel/common/block/irq/irq.c:186:90: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
186 | printk(BIOS_ERR, "ERROR: Slot %u, pirq %u, no pin for function %lu\n",
| ~~^
| |
| long unsigned int
| %u
187 | constraints->slot, fixed_pirq, i);
| ~
| |
| size_t {aka unsigned int}
CC ramstage/soc/intel/common/block/gspi/gspi.o
CC ramstage/soc/intel/common/block/graphics/graphics.o
CC ramstage/soc/intel/common/block/gpio/gpio.o
CC ramstage/soc/intel/common/block/gpio/gpio_dev.o
The variable `i` is of type size_t, so use the corresponding length
modifier `z`.
Fixes: b59980b54e ("soc/intel/common: Add new IRQ module")
Change-Id: I09f4a8d22a2964471344f5dcf971dfa801555f4a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enhance USB 2.0 SI by increasing the level of "HS DC Voltage Level"
and "Disconnect Threshold Adjustment" per port:
port#0: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9
port#1: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9
port#4: COMPDISTUNE0: 0x1->0x6 / TXVREFTUNE0: 0x3->0xE
port#5: COMPDISTUNE0: 0x1->0x5 / TXVREFTUNE0: 0x3->0x9
BUG=b:203049656
BRANCH=guybrush
TEST=1. emerge-guybrush coreboot chromeos-bootimage
2. pass USB eye diagram verification
Change-Id: If5a6563e93bfa6beb529a5593fcc9124ce62d77f
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
The new settings from the thermal team improve performance mainly with
respect to fan control settings.
BRANCH=None
BUG=b:212210824
TEST=Built and tested on taeko board
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I2d5c9b6dff87a2e8897d74f3be89c965db22fe16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taeko is going to exchange i2c port for touchscreen and cr50.
BUG=b:211911780
TEST=build pass
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ib7273ba107c58e4cd90db00e301a399d7a7df76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207527331
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I3df66eea13a3284d1453d7db6f7845e42a1dcb7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add the new memory support:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
Hynix H54G56CYRBX247
Samsung K4UBE3D4AB-MGCL
BUG=b:212328327
TEST=FW_NAME=anahera emerge-brya coreboot
Change-Id: Ib08a1348333accdbb7551ef428d8d130b621dd9f
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add the new memory support:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
Hynix H54G56CYRBX247
Samsung K4UBE3D4AB-MGCL
BUG=b:212330664
TEST=FW_NAME=redrix emerge-brya coreboot
Change-Id: I32491f86813c8e6566774d4b3d7d82295f906bd3
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
update override devicetree for type-c display based on schematics
BUG=b:209489126
TEST=emerge-brya coreboot
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Change-Id: Icd2f5de38df0eb89fb92ea2abe25851c0d6ec53f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable unused I2C4 PCI device (00:19.0) so that UART2 (00:19.2) can be
enumerated properly, using `PchSerialIoSkipInit` to prevent FSP-S from
configuring anything regarding I2C4 (e.g. GPIOs).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9c2c4f67672ba5667ebdae9ecc01054449dd3dfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Convert EC_GPI_SCI to Kconfig option with default value of
0x50 that is used by most boards.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8d47ebe76394fe1bcb217e0c6211db1566f82189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
"integrated_graphics" is already used as a "bool" at line #2128.
So set it as "bool".
Change-Id: Ic5286e691c312e8e44bbbd8e782fdfd4a13cb60f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This restricts availability of non-standard functions (such as memmem)
on FreeBSD and macOS. It also isn't necessary on glibc.
Change-Id: Iaee1ce7304c89f128a35a385032fce16a2772b13
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
flashmap/fmap.c includes commonlib/bsd/sysincludes.h, which already
includes the necessary header for endian(3) functions (endian.h on
Linux and sys/endian.h on FreeBSD). This also resolves a compilation
error on macOS (tested on 10.5.7), as macOS does not provide endian.h.
Change-Id: I0cb17eacd253605b75db8cf734e71ca3fe24ad6c
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
macOS has never defined the usual endian(3)/byteorder(9) byte-swapping
functions. This change implements these byte-swapping functions using
the OSSwap functions, which provide identical functionality. This was
tested on macOS 10.15.7.
Change-Id: I44d59869a4420030f3ce26118175304c680d57a1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
GPP_CLK1 is used for SD and GPP_CLK2 is for WWAN on guybrush.
Disable unused PCIe GPP_CLK1 and GPP_CLK2 for dewatt.
BUG=b:211566312
TEST=emerge-guybrush coreboot
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: If449453bc60ed41e104346429babc06a73acef64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Retype the `pcie_port_coalesce` devicetree options and related variables
to better reflect their bivalue (boolean) nature.
Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some Super I/O resources were unused and not listed, causing warnings
during resource allocation. Suppress these warnings by setting them to
zero.
Change-Id: I28e37c3a58f3a6b5a613733f26ac18d6a7b3be2e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41459
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 13f601fb:
2021-09-24 12:25:24 +0000 - (vboot: boot from miniOS recovery kernels on
disk)
to commit id 25b94935:
2021-12-29 21:34:41 +0000 - (vboot_ref/futility: Wrap flashrom_drv
behind USE_FLASHROM)
This brings in 44 new commits.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: Ife75d21ddfa0b956fdf7a638cd53b55b11f6cb7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Bugzzy uses panel-built-in touch screen, it needs to set panel power
and reset signal to high for touch screen to work.
On user mode, coreboot doesn't initialize graphics since there is no
screen display before OS. So we would add a WA to initialize required
signals on user mode. It takes under 30 ms delay on booting time.
BUG=b:205496327
BRANCH=dedede
TEST=Verified touch screen worked with test coreboot
and test touch screen 028D firmware
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Iaa4d16deb932f43ae1ab33ff5b4e74120ab670db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The latest schematics changes the EN_PP3300_SSD from GPP_D11 to GPP_F14,
I2C/DDC signals from GPP_E22/E23 to GPP_D11/D12.
BUG=b:206602609
TEST=build pass
Signed-off-by: Rory Liu <rory.liu@quanta.corp-partner.google.com>
Change-Id: I1e4aa6c540806c34b4a642f7813de0a64c6ea2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
This patch maps coreboot console level to FSP debug level. This
is useful to suppress MRC (FSP-M) debug logs.
Callers have to select HAVE_DEBUG_RAM_SETUP config to get verbose MRC
debug log,
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I398d576fad68a0d0fc931c175bbc04fcbc2e54ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Typically, FSP-M aka MRC debug log level defaults to `3`
meaning prints all `Load, Error, Warnings & Info` messages.
Sometimes it's too much information to parse even when users
aren't required to have such detailed information hence,
implement `fsp_map_console_log_level()` that maps coreboot console
log level to FSP-M debug log level and suppress verbose MRC debug
messages unless caller selects `HAVE_DEBUG_RAM_SETUP` config and
then the user can enable `DEBUG_RAM_SETUP`.
TEST=FSP-M debug log suggested default `SerialDebugMrcLevel`
UPD value is `2`. While this patch selects `HAVE_DEBUG_RAM_SETUP`
and user to select `DEBUG_RAM_SETUP` config to override
`SerialDebugMrcLevel` UPD value to '5' aka verbose.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iea3b32feca0893a83fdf700798b0883d26ccc718
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Other drivers may need to know the coreboot log level hence,
export this function rather than marking it static.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I56349f22c71c9db757b2be8eeb2dbfe959f80397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- Set slow slew rate VCCIA and VCCGT to 8
BUG=b:206704930
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I1e36c29e82af631cd650d46b67f031d275c97711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Group all data specific to each notify phase in a struct to avoid
redundant code.
Change-Id: Ib4ab3d87edfcd5426ce35c168cbb780ade87290e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Sort includes alphabetically, drop spaces after type casts and unbreak
some long lines that are less than 96 characters long.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I2dafd677abbdd892745fea1bf4414f6e0d5549bb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When coreboot goes to die because FSP returned an error, log the return
value in the message printed by `die()` or `die_with_post_code()`.
Change-Id: I6b9ea60534a20429f15132007c1f5770760481af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since TGL `spi_protection_mode` bit replaces the previous
`manufacturing mode` without changing the offset and purpose
of this bit.
This patch renames to `manufacturing mode` aka `mfg_mode` to
maintain the parity with other PCHs as part of IA-common code.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6d00f72ce7b3951120778733066c351986ccf343
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Remove unnecessary new lines in crashlog code.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0920f563d6fdf9414eab86796cedcac83173dba3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3e79f637bedec0bdca1312291328b2385bd027a7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The `pci_dev_disable_bus_master()` function doesn't need to be guarded
with `CONFIG(PC80_SYSTEM)`, so move it out of the guard.
Change-Id: I813e0f72c3c624c73ab9ecbe7512359608ace927
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I20d79d4b42908314dbf7021a67b92e5fd2b79556
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I72c0e0c3968cb2e92b35381691762148f4c270e4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I71f22100fe56a8b88321d220f98ac03887ce6bd7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I9b523ebee2d2af8585736588306ca687dfe16003
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Ifcdfd9fff197391ca0da083e7f6151c2dffe3374
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I5c437ee2d62415f9048a24ad4a517fc33eec3cf1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60360
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Ic9e001721baa7b7df89204eed03375e872c93e28
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Id1bbe7d68d9eace3f54e9decbd02f8b2b50d6867
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Ieb6626aeb2023ac27eac8a515cc0e561607f9f62
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move board-specific selects out of common configuration and add them to
each board where necessary.
Change-Id: I1cfea0491f707052db2fbcee078e2c27c5a306c5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: I677770168caa95d95fd7d32cadc15ffae8455e8c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move selects from Kconfig.name to Kconfig so that the configuration is
at one place and not distributed over two files.
Change-Id: Ibd78e1c42d6184127277c1b5dea66150027444fe
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I1df255d55b8f43a711d836c2565c367bd988098a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I50cdffca34a6150ac11c3e83e1a603b766d1b84e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
<types.h> already provides <commonlib/bsd/cb_err.h>, <limits.h>,
<stdbool.h>, <stdint.h> and <stddef.h> headers.
Change-Id: I700b3f0e864ecce3f8b3b66f3bf6c8f1040acee1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Elkhart Lake was hooked up to the FSP repo with commit 79fcadb3c46
(soc/intel/elkhartlake: Use FSP from FSP repo by default) making
these headers obsolete. Thus, drop them.
Change-Id: I2d6a4d4614ae21d5b8e77eceb85baa13e491c2ae
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I4a9165b4610d7d035509b7f10eed0d9847afca1f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I16e30f4a774c8ffca3bdbbf57c9a0c6f6d3ca72c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I9f08cc180614e7d966256b2944745b0bc1d29865
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I98ac7a9c1cd16609cf6bd38e1bd9bf8cf54817fb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I8de151e7df39a0282d032b8ca96c2d1b01014c3a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `LNot (a)` with `!a`.
Change-Id: I2bf5a09df831b66197c2a9af780c873290e12b42
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
