Age | Commit message (Expand) | Author |
2015-04-04 | broadwell: fix typo in pei_data | Duncan Laurie |
2015-04-04 | broadwell: Add USB3 PHY tuning fields to PEI DATA | Duncan Laurie |
2015-04-04 | samus: Change touchscreen bootloader mode i2c address | Duncan Laurie |
2015-04-04 | samus: Enable GSPI0 interface | Duncan Laurie |
2015-04-04 | Baytrail: Fix no_dev_behind_port not executed for RP1/2/3. | Kenji Chen |
2015-04-04 | samus: Enable GPIO9 as touchpad wake | Duncan Laurie |
2015-04-04 | samus: Update thermal max for broadwell | Duncan Laurie |
2015-04-04 | samus: Assign GPIO2 to HP_AMP_SHDN_L | Ben Zhang |
2015-04-04 | samus: Make codec interrupt active high | Ben Zhang |
2015-04-04 | Broadwell: Fix PCIe L1 Sub-State capability ID not filled. | Kenji Chen |
2015-04-04 | samus: Add codec platform data for jack detect | Ben Zhang |
2015-04-04 | samus: Change GPIO controller label to INT3437:00 | Duncan Laurie |
2015-04-04 | samus: Enable update screen for software sync | Duncan Laurie |
2015-04-04 | samus: Add smbios_mainboard_version to define board version | Duncan Laurie |
2015-04-04 | broadwell: Fix building with USE=quiet-cb | Duncan Laurie |
2015-04-04 | samus: Add codec platform info in ACPI | Duncan Laurie |
2015-04-04 | Drop (empty) google/snow mainboard directory | Stefan Reinauer |
2015-04-04 | arm64: make secmon link with the manual template | Aaron Durbin |
2015-04-04 | armv4: Add verstage to armv4 | Furquan Shaikh |
2015-04-04 | armv7: Add config option guard for verstage class | Furquan Shaikh |
2015-04-04 | tegra124: use known-good drive for fast-train only | Neil Chen |
2015-04-04 | tegra124: add support for full DP link training | Neil Chen |
2015-04-04 | rk3288: Replace SPI fifo_size with constant | David Hendricks |
2015-04-04 | rk3288: Pass SPI bus speed in as parameter to init function | David Hendricks |
2015-04-04 | build system: Introduce manual file type | Patrick Georgi |
2015-04-04 | build system: Allow defining generic rules | Patrick Georgi |
2015-04-04 | build system: create proper dependency files | Patrick Georgi |
2015-04-04 | x86: rename ldscript_failover.ld to failover.ld | Patrick Georgi |
2015-04-03 | tegra132: implement platform_prog_run() | Aaron Durbin |
2015-04-03 | tegra124: implement platform_prog_run() | Aaron Durbin |
2015-04-03 | rmodule: use struct prog while loading rmodules | Aaron Durbin |
2015-04-03 | program loading: unify on struct prog | Aaron Durbin |
2015-04-03 | program loading: add prog_run() function | Aaron Durbin |
2015-04-03 | program loading: introduce struct prog | Aaron Durbin |
2015-04-02 | pinky: Move some init to mainboard bootblock | David Hendricks |
2015-04-02 | rk3288/pinky: Move uart address to mainboard Kconfig | David Hendricks |
2015-04-02 | rk3288: remove duplicated #define `PERI_ACLK_DIV_SHIFT` | Aaron Durbin |
2015-04-02 | Nyans: replace cpu_reset with hard_reset | Daisuke Nojiri |
2015-04-02 | Broadwell: Select PCIE_L1_SUB_STATE and apply Broadwell settings. | Kenji Chen |
2015-04-02 | pistachio: add gpio type definition | Vadim Bendebury |
2015-04-02 | Clean up architecture-specific Kconfigs | Julius Werner |
2015-04-02 | build system: extend src-to-obj for non-.c/.S files | Patrick Georgi |
2015-04-02 | urara: Fix CBFS header definitions | Vadim Bendebury |
2015-04-02 | urara: Configure UART line control to 8N1 | Ionela Voinescu |
2015-04-02 | mips: do not place branch instructions in branch delay slot | Vadim Bendebury |
2015-04-02 | coreboot: rk3288: add new ddr config and support ddr3 freq up to 800mhz | jinkun.hong |
2015-04-02 | rockchip: support pwm regulator | huang lin |
2015-04-02 | rockchip: support i2c clock setting | huang lin |
2015-04-02 | pinky: Force delay for EC SPI transfers | David Hendricks |
2015-04-02 | veyron_pinky: Add rev2 support, clean up mainboard.c | Julius Werner |
2015-04-02 | veyron: select rw romstage using vboot2 | Daisuke Nojiri |
2015-04-02 | southbridge/amd/pi: Add initialization of 8254 and 8259 | Dave Frodin |
2015-04-02 | broadwell: Disable ADSP power gating feature by default | Duncan Laurie |
2015-04-02 | chromeec: Add wakeup delay after SPI /CS assertion | David Hendricks |
2015-04-02 | samus: Fix codec interrupt and add GPIO defines | Duncan Laurie |
2015-04-02 | chromeec: Fix logging of EC wake events | Duncan Laurie |
2015-04-02 | samus: Clean up touch wake sources | Duncan Laurie |
2015-04-02 | broadwell: Add event log entry for GPIO27 | Duncan Laurie |
2015-04-02 | arm: Prevent compilation of old, experimental SMP support | Julius Werner |
2015-04-02 | Broadwell: Reg_Script: add END tag to array "smbus_init_script" | Ryan Lin |
2015-04-02 | samus: Fix and clean up GPIOs and EC info/events | Duncan Laurie |
2015-04-02 | chromeec: Add battery status event and re-enable _BIX | Duncan Laurie |
2015-04-02 | Broadwell: Synchronize for power management with FRC | Kenji Chen |
2015-04-02 | Broadwell: Synchronize RO, Link Arbiter, and OBFF with FRC | Kenji Chen |
2015-04-02 | Broadwell: Revise programming flow for write-once registers | Kenji Chen |
2015-04-02 | broadwell: Configure IOSF Port and Grant Count | Kenji Chen |
2015-04-02 | vpd: retrieve mac addresses and pass them to bootloader | Vadim Bendebury |
2015-04-02 | Samus: Synchronization with FRC to enable PCIe Relaxed Order. | Kenji Chen |
2015-04-02 | samus: Ensure PD controller is in RO mode for recovery | Duncan Laurie |
2015-04-02 | chromeec: Add support for v3 commands on LPC | Duncan Laurie |
2015-04-02 | chromeec: Add commands to check PD image type | Duncan Laurie |
2015-04-02 | chromeec: Update ec_commands.h from EC repository | Duncan Laurie |
2015-04-02 | baytrail: Change USB3 PLL VCO and iCLK PLL current on BYT-M/D CPU | Kein Yuan |
2015-04-02 | broadwell: Update PCIe configuration to follow BWG | Kane Chen |
2015-04-02 | chromeos: Add WiFi calibration CBMEM entry pointer to coreboot table | Vadim Bendebury |
2015-04-02 | broadwell: Clear pending GPE events before entering sleep state | Duncan Laurie |
2015-04-02 | Baytrail: Change PCIe root disable algorithm | Kenji Chen |
2015-04-02 | Baytrail: add _PRT to each PCIe root port device | Ted Kuo |
2015-04-02 | Samus: fix unused GPIO pin | Kenji Chen |
2015-04-02 | ipq806x: provide soc specific CBMEM_CONSOLE_PRERAM_BASE | Vadim Bendebury |
2015-04-02 | smbios: add a family id in smbios type1 family | Kane Chen |
2015-04-02 | vboot: add vbnv flash driver | Daisuke Nojiri |
2015-04-02 | broadwell: Add reporting of broadwell MCH revision | Duncan Laurie |
2015-04-02 | broadwell: Change CPUID 306D4 to report "E0 or F0" | Duncan Laurie |
2015-04-02 | broadwell: me: Fix typo and add missing phase state | Duncan Laurie |
2015-04-02 | pinky: Enable EC_SOFTWARE_SYNC | David Hendricks |
2015-04-02 | mainboard/asus/kfsn4-dre: Set maximum installable memory to 64GB | Timothy Pearson |
2015-04-02 | northbridge/amd/amdfam10: Generate SMBIOS tables for RAM | Timothy Pearson |
2015-04-01 | mainboard/supermicro/h8qme_fam10: Fix indentations and spelling | Timothy Pearson |
2015-04-01 | x86: set smbios rom size based on CONFIG_ROM_SIZE | Aaron Durbin |
2015-04-01 | mainboards/amdfam10: Copy DIMM information to cbmem after romstage | Timothy Pearson |
2015-04-01 | mainboards: fix spd generation | Aaron Durbin |
2015-04-01 | cbfs: correct types used for accessing files | Aaron Durbin |
2015-04-01 | cbfs: more accurate size check for simple buffer mapping | Daisuke Nojiri |
2015-04-01 | northbridge/amd/amdfam10: Collect DIMM information for ramstage use | Timothy Pearson |
2015-04-01 | northbridge/amd/amdmct: Pack MCT and DCT info structs | Timothy Pearson |
2015-04-01 | amd/pi/hudson: INCLUDES was renamed to CPPFLAGS_common | Patrick Georgi |
2015-04-01 | chromeos: INCLUDES was renamed to CPPFLAGS_common | Patrick Georgi |
2015-04-01 | build system: make CONFIG_* symbols disappear from objects | Patrick Georgi |
2015-03-31 | cbfs: remove cbfs_core.h includes | Aaron Durbin |