| Age | Commit message (Collapse) | Author |
|---|
|
The touched workaround for Sandy Bridge reserves two memory regions that
could cause graphics corruption if mapped by the integrated graphics
device. To the best of our knowledge, the workaround is not needed for
Ivy Bridge revisions.
Tested on kontron/ktqm77 (Ivy Bridge): Booted Linux and checked the
memory regions are not reserved. Couldn't test on Sandy Bridge, due to
lack of hardware.
Change-Id: I4273d1d804b490cf93c23426782eb1ffaf29f7d4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12326
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
|
|
There has been a concerted effort to clean up coreboot's microcode
handling that has included a move away from coreboot-specific
microcode file collections. As a result, the ability to specify
a single microcode file to be added to the image is of less utility
than before.
NOTE: This patch remove the built-in external microcode feature,
however the user can still specify no microcode during build and
manually add the correct microcode file(s) to the CBFS image after
the build is complete.
Change-Id: Ifea94c21e531a74953f5a0e2f489378c20ef3b5c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11903
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Most AMD hardware requires at minimum two warm resets
when booting from S5 (power off). This is uncomfortably
close to the maximum bootblock execution count, and has resulted
in unstable normal/fallback operation on some machines.
Increase the default max bootblock execution count before fallback
to 6. This translates to roughly 2 - 3 failed boots before fallback
mode will engage, with an absolute worst case of pushing the reset
button 5 times to engage fallback mode in the absence of a dedicated
recovery jumper.
Change-Id: I1911f1b77f168835b516e6a915d5b6949f47219a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12317
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On mingw, the function glob has some default options
which are not compliant with man page.
If gl_offs is not set as 0, there may be some slots which
is reserved.
If gl_pathc or gl_pathv is not set as 0, the result might
be appended to the list instead of being added as new ones.
Change-Id: I03110c4cdda70578828d6499262a085a81d26313
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11711
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
The buildgcc makefile was using the variable 'BUILDJOBS' to pass the
number of cores to use for the build into buildgcc. This is changed
to 'CPUS' to match the variable name for the what-jenkins-does target.
Change-Id: I373c4988e9f096ca2e142afdd5e94d7d806891e3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12299
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a DMAR table to advertise IOMMU and IRQ remapping capabilities to
the OS.
Tested with kontron/ktqm77. Under Linux, the table is detected and
interrupt remapping is enabled automatically.
Change-Id: Id6ee601a0a8543ed09c6bb8d308a3a3549fc34e5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12195
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Sandy Bridge and Ivy Bridge processors have two IOMMU units. One for the
integrated graphics controller and one for all other PCI devices. Assign
resources for both IOMMUs and apply some quirks.
Tested with kontron/ktqm77 and a Muen based system that makes use of the
IOMMUs. Not tested on Sandy Bridge, but register dumps show the same
settings that are applied here.
Change-Id: I43b5e20b750e7529f448acac35de173185678fd9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12194
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Assign unique bus/dev/fn values for the I/O APIC and each HPET. The
values are taken from an example DMAR table. They are used as source-id
for MSI requests and as completer-id for reads from the device' MMIO
space [1, 2]. The former is usefull for source-id verfication during
interrupt remapping.
[1] Intel 6 Series Chipset and Intel C200 Series Chipset
Datasheet
Document-Number: 324645
[2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH)
Datasheet
Document-Number: 326776
Change-Id: Ib46f8cfb7d966dd1cf2b026f671bc45ffcc43d25
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12193
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On server boards with a recovery jumper, having the fallback path
less sensitive to power fluctuations or BMC issues makes sense.
Increase the maximum number of boot attempts before automatic
fallback to 10 on these boards.
Change-Id: Iabe0b0cbf332686db8e9380a8b65a1477173599c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12320
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Refactor acpi_create_dmar_drhd_ds_pci() and add similar functions for
I/O-APICs and MSI capable HPETs. We violate the spec [1] here, which
talks about 16-bit source-ids spread over start_bus and path entries.
Intel actually uses bus/dev/fn identification for those devices too,
and so do we.
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I0fce075961762610d44b5552b71e010511871fc2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12192
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a parameter to acpi_create_dmar() for the flags field and define
flags given by the spec [1].
[1] Intel Virtualization Technology for Directed I/O
Architecture Specification
Document-Number: D51397
Change-Id: I03ae32f13bb0061bd3b9bef607db175d9b0bc5e1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12191
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: I52847bc2fc16b27ac0de0bc7c847221b1e5cb744
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12245
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The cbmem utility shouldn't be using the intra coreboot
data structures for obtaining the produced data/information.
Instead use the newly added cbmem records in the coreboot
tables for pulling out the data one wants by using the
generic indexing of coreboot table entries.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Interrogated cbmem table of contents with updated code.
Change-Id: I51bca7d34baf3b3a856cd5e585c8d5e3d8af1d1c
Reviewed-on: http://review.coreboot.org/11758
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix a function call in the normal path using the original function
name and arguments in code that was changed in commit 3bfd7cc6
(drivers/pc80: Rework normal / fallback selector code)
This commit reworked most of the fallback / normal code,
however the normal code paths were not fully tested by Jenkins,
so this was missed.
Change-Id: Ied66334977272a13b7a7307ff4d9f34eb22040aa
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12315
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Per IRC and Gerrit discussion, the normal / fallback
selector code is a rather weak spot in coreboot, and
did not function correctly for certain use cases.
Rework the selector to more clearly indicate proper
operation, and also remove dead code. Also tentatively
abandon use of RTC bit 385; a follow-up patch will
remove said bit from all affected mainboards.
The correct operation of the fallback code selector
approximates that of a power line recloser, with
a user option to attempt normal boot that can be
cleared by firmware, but never set by firmware.
Additionally, if cleared by user, the fallback
path should always be used on the next reboot.
Change-Id: I753ae9f0710c524875a85354ac2547df0c305569
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12289
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Show laptops and servers before desktop boards since that's where both
the market and coreboot are the most active these days.
Change-Id: I7de63975f3f2ff5e983b19e07558175a58870a1b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12292
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There's the sentiment that the Supported_Motherboards wiki page is
outdated. Point out that the list is current (and drop the table of
contents that became a distraction).
Change-Id: Ib2363fad0b7f6951b07b2ad0c85148d9bc729b55
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12291
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The K8 PowerNow! state generator does not generate _PSS objects
for nodes other than the first CPU package. This patch backports
the PowerNow! core count fixes for Family 10h to the K8 CPUs.
Change-Id: I7b411ab75155dfb4bf51ae04301aa16fb2ae89f3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12286
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I0180e0ae2aeeffcef46a97892356f1955f581efd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12295
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to not expose the cbmem data structures to userland
that are used by coreboot internally add each of the cbmem
entries to a coreboot table record. The payload ABI uses
coreboot tables so this just provides a shortcut for cbmem
entries which were manually added previously by doing the
work on behalf of all entries.
A cursor structure and associated functions are added to
the imd code for walking the entries in order to be placed
in the coreboot tables. Additionally a struct lb_cbmem_entry
is added that lists the base address, size, and id of the
cbmem entry.
BUG=chrome-os-partner:43731
BRANCH=None
TEST=Booted glados. View coreboot table entries with cbmem.
Change-Id: I125940aa1898c3e99077ead0660eff8aa905b13b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11757
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
TEST: Booted ASUS KGPE-D16 with single Opteron 6380
* Unbuffered DDR3 DIMMs tested and working
* Suspend to RAM (S3) tested and working
Change-Id: Idffd2ce36ce183fbfa087e5ba69a9148f084b45e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11966
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I07e517f239807cbe76037308f0beff80c9a6f2ba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12101
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I34501d3fc68b71db7781dad11d5b883868932a60
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11965
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id7441dacef2e46e283d1fc99d5e5fa3f20e0d097
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I21777283ce0fd3c607951204a63ff67dc656c8cc
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11956
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I67a76cf0e4ebc33fbd7dd151bb68dce1fc6ba680
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11957
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Some comments and leftover static USB devices whose function
numbers changed.
Change-Id: I4d7c7499fe436588ef7e5ae030212c2638a4505f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12263
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To store memory configuration in SPI flash currently adds
some 150 ms delay in ramstage, visible in timestamps listing
at 75:cbmem post.
Change-Id: I1160259054b58e9a8df2a105c730e0f4140be1f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disables mouse ps2 data/clock signals, not connected in hardware.
Purpose of other GPIOs is not really known, but match them
with superiotool dump taken from vendor bios.
Change-Id: I7b549fbd7dd3fa4cbd507d76882b60bc324a4bd0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12214
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
While the actual pins behind these devices are not exposed on the chip,
the enable registers are implemented in hardware. Allow to turn these LDNs
off, like the vendor bios for asrock/e350m1 does.
Change-Id: I4d6d5a8de12b09095138cacbad62b2dfbbe54028
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12213
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Several ramstage files were inadvertently using Family 10h-specfic
structures, causing unstable operation. Use the K8-specific
structures instead.
Change-Id: I64066dfdca83557393499b77726051e25b814381
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12290
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
abuild -t EMULATION_QEMU_UCB_RISCV,EMULATION_SPIKE_UCB_RISCV works now
Change-Id: I49d8cd86e21ede724d8daa441b728efa1f6ea1fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12281
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
junit reports were kept around (and appended to) in some cases, leading
to duplicate reports on jenkins.
Drop old per-mainboard reports before building said boards, and do the
same for the tools (reported thrice).
Change-Id: I74a035587bbf917dca85ba6fc74621c583efe9a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Specifying a directory with multiple boards (eg abuild -t google/veyron)
makes abuild run through all of them.
Change-Id: Ifb60f3a1f0c4a727dc43c48671ea90711ffe5585
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12278
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since we now have multiple boards in a single mainboard directory (eg
google/veyron), we need some other identifier from which to create
output directories and filenames in abuild than the directory name.
Use the wildcard part of CONFIG_BOARD_* instead.
This changes the semantics of payload.sh handling: it's passed the
single new identifier instead of two arguments "vendor" and "board" that
constitute the mainboard directory's path.
Change-Id: I0dc59c6a1ad1ee51d393fa06b98944a6da342cdf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12277
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It only takes a single argument now, which is the directory below the
coreboot-builds directory. Preparation for future work.
The only visible change is in console output.
Change-Id: I4b0fe268ccfb69a0403fa5f8b23444c07843386f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12276
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's passed the mainboard's directory name (below $TARGET) directly
in preparation of more rework in that area.
Change-Id: I3a82b8673fdea07bc5c957f76f4685c34a805334
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12275
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Its hardcoded HTTP endpoint is gone since 2007.
Change-Id: Ib76814d31b571456d950d45f45912036b6fa82d1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12274
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
If you already have a configuration, there's no need to run it through
abuild.
Change-Id: I4dde9a7b96bb0c08ec5c91426a4dd3aa15e74edf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12273
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This resolves a Kconfig warning.
Change-Id: Ic77c8bf89613c116dfdc73572709aeb354e33b2a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12287
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I7da84b064287a445fd75a947e2f96ce1ae30d3de
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11954
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8ab7b2cd9bf36d53b744a11d32dd40c750149567
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12272
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The acpi_get_sleep_type function in SB700 ramstage is only needed
for boards / CPUs that require late CBMEM initialization.
Providing this function in early CBMEM-compatible boards breaks
building of the ACPI S3 code due to multiple definitions of
acpi_get_sleep_type.
Change-Id: Ieebc2640a586812e3e2bfd410987205d64147314
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12267
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
One of the interrupts in intel_vga_int15_handler lacks
positive return status. Write correct status to avoid
error messages in log.
TEST=With this change `int15 call returned error` is not shown anymore
on a custom board with Intel Atom CPU, i945GME northbridge and
i82801gx southbridge.
Change-Id: I740b2df9bd6a7d261d89bef74b924edbb64354aa
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/12255
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
checkpatch.pl that we inherited from Linux checks for its absence, so it
may be easiest to follow their style of not caring for the FSF's address
anymore.
TEST=visual check that `git diff` and `git diff |grep "^[+-]" | \
grep -v "^--- " |grep -v "^+++ " |sort | uniq -c |sort -n` look
reasonable (matching number of removed and added comment terminators */,
etc.).
Also, `git grep -A3 "You should have received a copy"` only
returns license texts, imported files, patches and help strings in
applications as remaining copies of that paragraph
Change-Id: I7c43860b6fd7ec526983c24b608994539128cfb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11887
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The existing KFSN4-DRE support hung during ramstage while initializing
AP #3 if a second CPU package was installed. After analyzing the
Sun Ultra 40 M2 support code it became apparent that the K8 code
cannot function correctly if sequential RAM training is disabled,
and that there were a few other missing calls. This patch adds
the missing calls, adjust the CAR space to an appropriate level, and
explicitly defines the link numbers and connections in devicetree.cb
TEST: Booted ASUS KFSN4-DRE with 2x Opteron 8222 installed.
Change-Id: I96178b7367b0c13de5c9d5d90d032fb0c53639c2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12285
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I15375ac1247b7cc8d80d910a767c7f3e67eb8739
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Disable the parallel CPU initialization for model_206ax, that is Sandy
Bridge and Ivy Bridge processors. We never did it the way that Intel
recommends and it became unreliable with the introduction of SMM_MODULES
in commit a3e41c0 Migrate 206ax to SMM_MODULES.
Tested by booting kontron/ktqm77 2.6k times into Linux user space. No
issues so far.
Change-Id: Idffc352341419f22a36bf772534a5e11e711edf1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12266
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Those may collide with strings.h's index(), included transitively
through system headers.
Change-Id: I6b03236844509ea85cfcdc0a37acf1df97d4c5f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12279
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I66ef081fa1a520f0199366587800783ea1ef8719
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11023
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: I57eacf2a88077d0d0bffdcf44b3c2ecbd301e625
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12242
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: Ifca91ae44ab222371808ff1e0027a7cbd4646b0a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12243
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: Ic5604c75de249b945dca58aa904edec86558d3ec
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12241
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed already.
Change-Id: I667a8d15a2d16671115f62de656b1c5c6a8259b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12240
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this SuperIO have been removed from the tree.
Change-Id: I1d13ec7c5f27e82523612af7f07fca3176953600
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12239
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All mainboards using this southbridge have been removed from
the tree already.
Change-Id: I4398ef1e270bd0f36c5dd1c6ec3bfec6c2c091e6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12238
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using this southbridge have been removed from
the tree already.
Change-Id: I08269931d845d1f57b34174238bcce245ad77894
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12237
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
All boards using it have been deleted a long time ago.
Change-Id: Ib1c4018ab6ec27868c0e2fdbf9c91323ead076fb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12236
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
On x86_64 we need to leave long mode before we can switch to 16bit
mode. Oh joy! When's my 64bit resume pointer coming?
Why didn't this get caught earlier? Seems the Asrock E350M2 didn't
do Suspend/Resume?
Yes, I know it's Intel syntax. Will be converted to AT&T syntax
as soon as the whole thing actually works.. 8)
Change-Id: Ic51869cf67d842041f8842cd9964d72a024c335f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11106
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
It's unused and empty.
Change-Id: Ieb9225083cb779b7b94ca47488dad4d7beb30a94
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12235
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I35dab4e66514948aafa912d993fb8d42c5a520a0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11089
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I3df66320d0bc18221f947b47e7f09533daafabad
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11108
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I0f3297dff47dfb44da034ac6f305dcf1981b9de1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11080
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
There are some inconsistencies in AMDs APIs between the coreboot
code and the vendorcode code. Unify the API.
UINTN maps to uintptr_t in UEFI land. Do the same
here. Also switch the other UEFI types to map to
fixed size types.
Change-Id: Ib46893c7cd5368eae43e9cda30eed7398867ac5b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10601
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I6a0752cf0c0e484e670acca97c4991b5578845fb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11081
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I2a6cd7ad27cb6d16dfe3267ea6fb844a5e2e20c6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11083
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I5ea0f9338ccdd658b5fbec72aa35b4f80d63d4f9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11084
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ib4b643441a5b887abf73cc55930ea9b01037f6ea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11085
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I326c070398c72a877054969d3a03e6e427edc304
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11086
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ic97567851fa40295bc21cefd7537407b99d71709
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11952
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I169fafc3a61e11c3e4781190053e57bf34502d7b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11951
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Bring http://review.coreboot.org/#/c/10582/ to Hudson
Change-Id: I1ba3047699c304a769215fe901dc3511bf23199d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11022
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is extending http://review.coreboot.org/#/c/10583/
(29e6548) to the remaining AGESA northbridge drivers.
Change-Id: I6fa53b36a1420e92cb4aecb0f7b4c71541a94c71
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11021
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I2b4338927d56a2075c0a95f2ab981f1beaf69cc7
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11082
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This mirrors a similar commit made to Family 10h support
in changeset 11966 file model_10xxx_init.c
TEST: Booted ASS KFSN4-DRE with 1x Opteron 8222
Change-Id: I760ef27be00aed11c0ac21b9bd741189f4b05834
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12250
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing Kconfig option for FIDVID was permanently
set to "no" due to Kconfig stopping at the first matching
value set when parsing the file. This patch moves the
conditional set above the unconditional set, resolving
the issue.
Change-Id: Ic19f68f6b17943f9133ff32a9b6538f0bf942eca
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12224
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Backport a handful of debugging routines and the extended APIC
initialization code from Family 10h support to K8 support.
Change-Id: I08cc5c8bc65635ce09a69e32940dd7edd8d3be87
TEST: Booted ASUS KFSN4-DRE with 1x Opteron 8222
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12251
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The recommendation to set DisFillP during CAR initialization
on K8 NPT CPUs was ignored. The consequences of this are
largely unknown; fix up coreboot to follow the recommendations.
Change-Id: Ide512bbc1d9aa284179628e2aa598ef5475e8eeb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12249
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These two mainboards contained trivial mistakes related
to FIDVID that broke build when FIDVID was enabled.
Change-Id: Ie7bec77f26ec37eada21308984db4a9fd7a1866f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12226
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I74c285ff86993898e0120170cf07f48ef4dc9612
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12225
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ifdb1d1f267af289d962effe1150c7bc0a39cb5d2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12233
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a clone of the original Family 10h-compatible ASUS
KFSN4-DRE board, modified for basic K8 support to allow for
future K8 Socket F Opteron testing.
TEST: Booted KFSN4-DRE with 1 Opteron 8222 processor
KNOWN ISSUES:
* Second CPU package fails to initialize AP
This prevents use of a secondary CPU package
* Second memory channel of at least CPU package #0
does not function (crash at CAR handoff)
Change-Id: I591725babe685fa50a0d7473b17005fbd258056e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12212
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: If1df7f3ae9661fae49557c07def397b36b1d38f0
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12210
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This reverts commit 785b3eb6e8fcafb38395eec00f4f0fc0e906c7cc.
The commit re-tuned the upstream link again, it does not tune secondary side.
Change-Id: I9be70e95b06ceff99beba8a7c7eb6402b32fcca1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/12253
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Previously if we tried to read the HDMI EDID several times and failed
each time then we're return from hdmi_read_edid() with no error. Then
we'd interpret whatever happened to be in memory at the time as an
EDID--not so great.
Let's actually look at the error.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Monitor that can't read EDID not shows that in the log
Change-Id: I6e64b13ae3f8c61bf1baaa1cfc8b24987bd75cf3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 44bda7311f9ee677235e4dc8db669226518b3895
Original-Change-Id: I9089755b75118499bec37bdb96d1635f66252e65
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309298
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This timestamp marks that EC verification has completed.
BUG=chromium:537269
TEST=Run cbmem on glados, verify "1030:finished EC verification" is
seen.
BRANCH=None
Change-Id: I0114febae689584ec8b12c169e70f2d3995d8d4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: deeb2ab8085e5ea0a180633eb8fb1c86aadffe94
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I4f09e970ffedc967c82e6283973cbbcb2fbe037f
Original-Reviewed-on: https://chromium-review.googlesource.com/309280
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: build bot (Jenkins)
|
|
We found that some SanDisk Cruizer Glide CZ60 sticks (confirmed on 16GB
and 64GB versions) have a problem responding to our first GET_MAX_LUNS
request right after they received their SET_CONFIGURATION. They will
continually return a NAK until the host gives up (which is 2
user-noticable seconds for us). Adding a small delay of about 15us seems
to be enough to fix the issue, but let's do 50 to be save.
Confirmed with both MT8173 and Intel LynxPoint XHCI controllers.
BRANCH=None
BUG=chrome-os-partner:45473
TEST=No notable delay before detecting stick on Oak and Falco.
Change-Id: Ib03944d6484de0ccecbb9922d22666f54c9d53dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 589f19a901275fb8b00de4595763a7d577bed524
Original-Change-Id: I95c79fe40d3ad79f37ce2eb586836e5de55be454
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308980
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change Ie54699162 changed a structure's name and field names and we
didn't notice. Adapt.
BUG=none
BRANCH=none
TEST=building with UDC_DWC2 works
Change-Id: I592ebc29b2a08a23e6dbc9d2186807cbbbbca330
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3dda8ad5ffc36593d8b8fd6664a7f9b4816f0f93
Original-Change-Id: I4a065de0f4045a01bef1dc9fbb2e0578b5508518
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308791
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I4f0f6c1cb1fad5b65f196dc6b443252a0ecc70a1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11947
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Mostly a proof of concept for adding fuzzing to our tree.
Change-Id: I10e5ef3a426b9c74c288d7232a6d11a1ca59833b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12183
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There are cases where one region_device needs to be
accessed using offset/sizes from one address space
that need the offset translated into a different
address space for operations to take place. The
xlate_region_device provides an offset that is
subtracted from the incoming transaction before
deferring to the backing access region.
Change-Id: I41d43924bb6fbc7b4d3681877543209e1085e15c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12227
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Issue observed:
In a multi GPU setup (IGD and PEG) the system still uses the IGD.
CONFIG_ONBOARD_VGA_IS_PRIMARY has no effect on Sandy/Ivy Bridge.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
* ATI Radeon HD4780
Problem description:
The GMA is missing a disable function.
Problem solution:
Add a GMA disable function. Deactivate PCI device until remaining multi
GPU issues are resolved. Do not claim VGA decode any more.
Final testing results:
The system is able to boot using the PEG device as primary VGA
device.
Change-Id: I52af32df41ca22f808b119f3a4099849c74068b3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: http://review.coreboot.org/11919
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a comment explaining what `abcfg_reg(0xc0, 0x01FF, 0x0F4)` does.
This is a follow-up for commit 24501cae (AMD cimx/sb800: Initially
enable all GPP ports).
Change-Id: I5ac263ee088d36a7f7a2d03c1454ed647faa7147
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12190
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch addresses changes requested to commit 85c39a4c
(southbridge/amd/sb700: Add Suspend to RAM (S3) support)
- remove unused/commented out code
- remove unnecessary guards around acpi_get_sleep_type()
Change-Id: I2878e038d2f9f8d182615e1f4a75ddce5c45d5f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
|
|
This is a tool to help identify issues in coreboot's Kconfig structure
and in how the Kconfig symbols are used in the coreboot codebase.
It identifies a number of issues:
- #ifdef used on Kconfig symbol of type bool, hex, or int. These are
always defined.
- #define CONFIG_ in the coreboot code - these should be reserved
for Kconfig symbols.
- Redefinition of Kconfig symbols in the code.
- Use of IS_ENABLED() on non-bool kconfig symbols.
- Use of IS_ENABLED() on values that are not kconfig symbols.
- Attempts to find default values that will not set anything
because of earlier default settings. This needs to be expanded
significantly.
- Kconfig expressions using symbols which are not defined.
- Kconfig symbols that are defined but not used anywhere in the
Kconfig structure or coreboot code.
- Kconfig keywords used incorrectly.
- Whitespace issues
- Kconfig 'source' keyword issues
-- sourcing non-existant directories
-- sourcing Kconfig files multiple times
-- sourcing non-existent files
-- Kconfig files in the codebase that are never sourced
Additionally, it can be used to help debug the Kconfig tree
by putting all the files together into a single file with
their source locations listed.
Run from the coreboot directory:
util/lint/kconfig_lint
Change-Id: Ia53b366461698d949f17502e99265c1f3f3b1443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12088
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With the previous ELF stage extract support the resulting
ELF files wouldn't handle rmodules correctly in that the
rmodule header as well as the relocations were a part of
the program proper. Instead, try an initial pass at
converting the stage as if it was an rmodule first. If it
doesn't work fall back on the normal ELF extraction.
TEST=Pulled an rmodule out of Chrome OS shellball. Manually
matched up the metadata and relocations.
Change-Id: Iaf222f92d145116ca4dfaa955fb7278e583161f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12222
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to convert rmodules back into ELF files one needs
to add in the relocations so they can be converted back to
rmodules. Because of that requirement symbol tables need
to be present because the relocations reference the symbols.
Additionally, symbol tables reference a string table for the
symbol names. Provide the necessary support for adding all
of those things to an ELF writer.
TEST=Extracted rmodule from a cbfs and compared with the
source ELF file. Confirmed relocations and code sizes
are correct.
Change-Id: I07e87a30b3371ddedabcfc682046e3db8c956ff2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Instead of creating a loadable segment for each section with
SHF_ALLOC flag merge those sections into a single program
segment. This makes more tidy readelf, but it also allows
one to extract an rmodule into an ELF and turn it back into
an rmodule.
TEST=Extracted both regular stages and rmodule stages. Compared
against original ELF files prior to cbfs insert.
Change-Id: I0a600d2e9db5ee6c11278d8ad673caab1af6c759
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12220
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
