| Age | Commit message (Collapse) | Author |
|---|
|
Using PAD_WAKE is actually wrong. The wake bits are only supposed to be
set when using the GPIO controller to wake the system. coreboot's
current architecture relies on using GPEs to wake the system.
BUG=b:186011392
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib956fc299fe21cd7ea0b465cbdc5c8da830a668d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The usage of `pci_devfn_t` here is misleading, as these intentionally
store the `PCH_DEVFN_*` macros so they can be used across `smm` and
`ramstage` without requiring the device model. Update to `unsigned int`
instead, as `pci_devfn_t` implies the data is an MMCONF-compatible PCI
devfn offset.
Change-Id: Ic8880de984e6eceda4cbe141e118f3a5fdd672a2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52808
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the recent switch to SMM module loader v2, the size of the SMM for
module google/volteer increased to above 64K in size, and thus failed to
install the permanent SMM handler. Turns out, the devicetree is all
pulled into the SMM build because of elog, which calls
`pci_dev_is_wake_source`, and is the only user of `struct device` in
SMM. Changing this function to take a pci_devfn_t instead allows the
linker to remove almost the entire devicetree from SMM (only usage left
is when disabling HECI via SMM).
BUG=b:186661594
TEST=Verify loaded program size of `smm.elf` for google/volteer is
almost ~50% smaller.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a Kconfig option to set the keyboard translation state on exit and
set the default to true. This restores the keyboard to the power-up
defaults for firmware that does not always run libpayload keyboard init
to have consistent state, and provides an option to disable translation
for keyboards that might need it.
Change-Id: I25dfe3f425a5bb57e97476564886672b707aa3bd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
While building adlrvp board with chromeos.fmd and adding all chromeos
related artifacts, RO region is running out of space. Also, we need
to increase RW region size to accommodate all binaries and artifacts.
Aligning chromeos.fmd with Brya will help in solving this issue, thus
aligning chromeos.fmd with Brya.
BUG=b:184997582
BRANCH=NONE
TEST=Code compiles fine and able to boot adlrvp platform
Change-Id: I644e2e5ba06d2b816d413a7cc9f5f248d8a6fee8
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52732
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build
error as google_chromeec_cbi_get_dram_part_num() is not defined. Use
EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call.
BUG=b:184124605
Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Kconfig change which enables the hwp cppc acpi support is to get the
maximum performance of each CPU to check and enable Intel Turbo Boost
Max Technology.
BUG=none
BRANCH=none
TEST=check GCPC and CPC generated in acpi tables for each CPU
Change-Id: I5d93774e8025466f1911cf77459910fe872bfcc8
Signed-off-by: ravindr1 <ravindra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51795
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update UPDs required for configuring VT-d.
TEST=Boot to kernel, load ChromeOS VM.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I96a9f3df185002a4e58faa910f867ace0b97ec2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51849
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sooner or later, some board was going to need extra FW_CONFIG bits for
a field that was already in production, so this patch adds support for
adding extra (unused) bits to a field.
The extra are appended via a syntax like:
`field FIELD_NAME START0 END0 | START1 END1 | START2 END2 ...`
and the suffixed bits are all treated as if they are contiguous when
defining option values.
BUG=b:185190978
TEST=Modified volteer fw_config to the following:
field AUDIO 8 10 | 29 29 | 31 31
option NONE 0
option MAX98357_ALC5682I_I2S 1
option MAX98373_ALC5682I_I2S 2
option MAX98373_ALC5682_SNDW 3
option MAX98373_ALC5682I_I2S_UP4 4
option MAX98360_ALC5682I_I2S 5
option RT1011_ALC5682I_I2S 6
option AUDIO_FOO 7
option AUDIO_BAR 8
option AUDIO_QUUX 9
option AUDIO_BLAH1 10
option AUDIO_BLAH2 15
option AUDIO_BLAH3 16
option AUDIO_BLAH4 31
end
which yielded (in static_fw_config.h):
FW_CONFIG_FIELD_AUDIO_MASK 0xa0000700
FW_CONFIG_FIELD_AUDIO_OPTION_NONE_VALUE 0x0
FW_CONFIG_FIELD_AUDIO_OPTION_MAX98357_ALC5682I_I2S_VALUE 0x100
FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_VALUE 0x200
FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682_SNDW_VALUE 0x300
FW_CONFIG_FIELD_AUDIO_OPTION_MAX98373_ALC5682I_I2S_UP4_VALUE 0x400
FW_CONFIG_FIELD_AUDIO_OPTION_MAX98360_ALC5682I_I2S_VALUE 0x500
FW_CONFIG_FIELD_AUDIO_OPTION_RT1011_ALC5682I_I2S_VALUE 0x600
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_FOO_VALUE 0x700
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BAR_VALUE 0x20000000
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_QUUX_VALUE 0x20000100
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH1_VALUE 0x20000200
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH2_VALUE 0x20000700
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH3_VALUE 0x80000000
FW_CONFIG_FIELD_AUDIO_OPTION_AUDIO_BLAH4_VALUE 0xa0000700
Change-Id: I5ed76706347ee9642198efc77139abdc3af1b8a6
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52747
Reviewed-by: Duncan Laurie <duncan@iceblink.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This macro contains a cast on the and-mask, which can suppress actual
type overflow issues. Replace it with wrapper functions around the
existing macros in device/mmio.h which still contain a type cast, but
it is a non-issue because the wrapper functions now allow compilers to
check for overflows.
Change-Id: I975bf8152fc961767f0292bff4a03aecd8c65f56
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51886
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that all code has been switched to make use of the new accessors,
the old ones can be dropped. Follow-ups will clean up bitwise accessors.
Change-Id: Ib4cb24ca71f3c3717ea50d147ddca74aaf0288fa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
To keep the "main" haswell.h header short and simple, move PEG register
definitions into a separate file, as done with most other registers.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: Ibfca00456115a4a0c861dd6738605214a7d43fd9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51891
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These accessors were defined as macros in order to allow verifying the
patches that replaced the accessors using BUILD_TIMELESS=1. Now that all
replacement is done, turn the new accessors into static functions to let
the compiler perform overflow checks on the arguments.
Change-Id: Iaa2ba208fba11c4a00f2b8a05eb1129a32c6c092
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52816
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove leading and trailing underscores and change `RAMINIT_H` to be
more consistent with other headers.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: Ie20fcaa0f9393eb0a34054eda53b9bade63cc0d2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51890
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop unused chipset type macros, remove unnecessary guards and
reorganize contents so that headers can be included at the top.
Also drop the inclusion from ASL, as it is no longer necessary.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I6fcc0d428d0fdbf410bcbeb6ae4809870b7b498f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51889
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All the boards in the patch have a constraint for the I2C bus to operate
on 100 kHz. Provide dedicated values for rise time, fall time and data
hold time on mainboard level to get a proper timing which takes the bus
load into account. Giving these values the driver computes the needed
timings correctly.
TEST=Measure I2C frequency on all boards while coreboot accesses
external RTC and make sure it is 100 kHz.
Change-Id: Iab634190bda5fa2a4fdf2ebaa1e45ac897d84deb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52721
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Default VBT supports only integrated Display port. Magister supports a
HDMI port and hence support a separate VBT for Magister.
BUG=b:180666608
BRANCH=dedede
TEST=Build and boot to OS.
Cq-Depend: chrome-internal:3661227
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I52c10452887312959f68cfc4e25d5897dae388f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51279
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`soc_vtd_resources` from the else-part is unused since Cannon Lake was
removed. Thus, drop it and that if-else-condition.
Change-Id: I21689d1eae6952a80c98096443e7506a1466c07e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove useless help texts since they don't add any more value.
Change-Id: Iabcaec1bc8abe2c4628105752e49247e946fcfe7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52786
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove useless help texts since they don't add any more value.
Change-Id: Id8a15681a98ceb648814662545f5a3bf0f14b95c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52777
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for psp_verstage compilation.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Iac48c92a787adabfdaec96b6e8d2e24708d7e652
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These are mostly copied from picasso code with exception for
bl_syscall_public.h. For some SVCs svc number and/or prototype has been
changed.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6b431fdbf34fca2747833980ae53c06244905f93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Provide a SOC_INTEL_SKYLAKE_LGA1151_V2 option to select correct defaults
for the combination of a Union Point PCH with LGA1151v2.
As of the year 2021 it's common for motherboards with Z370, H310C
or B365 PCHs, which are meant to be paired with Coffee Lake CPUs.
Intel provides AmberLakeFspBinPkg to support this combination,
which implements Intel FSP External Architecture Specification v2.1.
Details:
1) Provide SOC_INTEL_SKYLAKE_LGA1151_V2 option that selects
PLATFORM_USES_FSP2_1, SOC_INTEL_COMMON_SKYLAKE_BASE and
SKYLAKE_SOC_PCH_H.
2) Add Amberlake FSP support.
If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, use AbmerLakeFspBinPkg instead
of KabylakeFspBinPkg.
3) Enable Coffee Lake CPUs support.
If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, select
MAINBOARD_SUPPORTS_COFFEELAKE_CPU.
4) Increase stack and heap size in CAR.
If FSP_USES_CB_STACK is set (it's selected by PLATFORM_USES_FSP2_1),
update DCACHE_BSP_STACK_SIZE and FSP_TEMP_RAM_SIZE values.
5) Update maximal number of supported CPUs.
If MAINBOARD_SUPPORTS_COFFEELAKE_CPU is set, set MAX_CPUS to 16.
Signed-off-by: Timofey Komarov <happycorsair@yandex.ru>
Change-Id: I7b6b9c676da55088cb5a12a218ea58d349ee440c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Z370, H310C and B365 PCHs use the same silicon as 200-series
PCHs and they are supported by soc/intel/skylake codebase
(not by soc/intel/cannonlake). Mentioned PCHs are meant to be paired
with Coffee Lake CPUs, so add the corresponding microcodes.
Signed-off-by: Timofey Komarov <happycorsair@yandex.ru>
Change-Id: I479c648e40c4c607d29f8cdd913fdbd6d7d7d991
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying
board revision from the EC.
BUG=b:186721096
TEST=1. emerge-brya coreboot chromeos-bootimage
2. flash the image to the device and check board rev
by using command `dmidecode -t 1 | grep Version`
Change-Id: I8eeb958f73607afb801794f91fbf91ec7bd5cd8b
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Inspired by discussion in CB:22822.
If I2C bus step response has not been measured, assume the layout to
have been designed with a minimal capacitance and SCL rise and fall
times of 0 ns. The calculations will add the required amount of
reference clocks for the host to drive SCL high or low, such that the
maximum bus frequency specification is met.
Change-Id: Icbafae22c83ffbc16c179fb5412fb4fd6b70813a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52723
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mancomb will have the boot flash on a daughterboard, so the SPI speeds
need to be low for now.
BUG=b:182211161
TEST=Build
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Icacb68d65fb414197d7b8d45799527d8d2568dc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Guybrush is pretty definitely alive, so this can be removed, as the
TODO line said.
BUG=180721202
TEST=Build
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I14f89f3e6f780c2da2136a838950ef2bcebc4c3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There is no lid switch in mancomb so remove it.
Will replace the lid switch with a fake gpio in depthcharge.
BUG=b:182211161
TEST=Depthcharge no longer halts complaining that coreboot didn't sample
the pin
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Ifd0fcec9557bf7ebad64ce9342d3b50eb511522b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
1. Wrap the long lines.
2. Align the message.
3. Add new SOC name, Cezanne.
4. Fix the cases.
Change-Id: Id537d7c9b77641289274c1b2b6f606e2be37ac6b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The usage of external oscillator has got nothing to do with Audio
Co-processor (ACP). Hence move it out of common config and put it into
the SoC config where it is being used.
BUG=None
TEST=Build Dalboz and Vilboz mainboards.
Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Update the telemetry setting for guybrush
vddcrvddfull_scale_current : 92165 #mA
ddcrvddoffset : 412
vddcrsocfull_scale_current : 30233 #mA
vddcrsocoffset : 457
BUG=b:182754399
TEST=Build, boot to guybrush
Change-Id: Ib92bb169693634665fc8e165837e7ae3e6137bcf
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52736
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add telemetry setting to UPD, the value comes from the SDLE testing.
BUG=b:182754399
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3787638
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow the FP6 IRM(#56328) to set the stapm parameter
and allow other mancomb variants boards can customize those parameters.
BUG=b:1181157669
TEST=build.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ib3ed76e5212a5a8b5fb4fcc3d6884ceff82377b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
cmocka is currently ignoring the UPDATED_SUBMODULES flag. Move the
cmocka checkout with the other submodule checkouts.
BUG=none
TEST=Make sure cmocka is not checked out if UPDATED_SUBMODULES=1
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2a1db809368a77d2c0f9c9a796d62555ec476dc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
The intermediate base and length are not required in ASL.
Change-Id: I0c72e2e4f7ec597adc16dbdec1fd7bbe4e41bfd6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51637
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The boolean is stored in ChromeOS NVS, not GNVS.
Change-Id: I5c424a052d484228a456f8f0ad4fb0bed3165e09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the support code for filling ChromeOS GNVS from
acpi/chromeos-gnvs.c to vc/google/chromeos/gnvs.c.
Change-Id: I7e92206561812eb3dc69739df49b6c3a93853858
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50612
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure ADSP domain from 0 to 4 and lock it to prevent
changing it unexpectedly.
TEST=emerge-asurada coreboot
BRANCH=asurada
Change-Id: Ib938ba05e8d0342572c57366c97ebb0185da8aba
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52728
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because galith/gallop both non-suport tablet mode,
remove un-use fw_config conditional.
BUG=b:176206495
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic9bb76c207ef033f81ecdd57849535b8ac8d13ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52565
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id56761b2a57754b8f8d726a4bd2674ffa6fd1159
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The existing helpers for reading/writing MSRs (rdmsr, wrmsr) require use
of the struct `msr_t`, which splits the MSR value into two 32 bit parts.
In many cases, where simple 32 bit or 64 bit values are written, this
bloats the code by unnecessarly having to use that struct.
Thus, introduce the helpers `msr_read` and `msr_write`, which take or
return `uint64_t` values, so the code condenses to a single line or two,
without having to deal with `msr_t`.
Example 1:
~~~
msr_t msr = {
.lo = read32((void *)(uintptr_t)0xfed30880),
.hi = 0,
};
msr.lo |= 1;
wrmsr(0x123, msr);
~~~
becomes
~~~
uint32_t foo = read32((void *)(uintptr_t)0xfed30880);
msr_write(0x123, foo | 1)
~~~
Example 2:
~~~
msr_t msr = rdmsr(0xff);
uint64_t msr_val = (msr.hi << 32) | msr.lo;
~~~
becomes
~~~
uint64_t msr_val = msr_read(0xff);
~~~
Change-Id: I27333a4bdfe3c8cebfe49a16a4f1a066f558c4ce
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52548
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Brya uses CBI to store dram part number. So enable the config.
BUG=b:186571840
BRANCH=none
TEST=dmidecode -t 17 can show the dram part number.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1b4fc4da31d8964763c3e671d84be71996fa5e2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This adds full EINJ support with trigger action tables. The actual
error injection functionality is HW specific. Therefore, HW specific
code should call acpi_create_einj with an address where action table
resides. The default params of the action table are filled out by the
common code. Control is then returned back to the caller to modify or
override default parameters. If no changes are needed, caller can
simply add the acpi table. At runtime, FW is responsible for filling
out the action table with the proper entries. The action table memory
is shared between FW and OS. This memory should be marked as reserved
in E820 table.
Tested on Deltalake mainboard. Boot to OS, load the EINJ driver (
modprobe EINJ) and verify EINJ memory entries are in /proc/iomem.
Further tested by injecting errors via the APEI file nodes. More
information on error injection can be referenced in the latest ACPI
spec.
Change-Id: I29c6a861c564ec104f2c097f3e49b3e6d38b040e
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rocky Phagura
|
|
This CL configures TCSS, BT and WiFi related GPIOs based on schematics.
BUG=None
TEST= BT, WIFI and TCSS functionalities validated with this change.
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Change-Id: Ie0e665275c281fcbad0d02ceb723cea433637711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50516
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify touchpad I2C sequence to meet requirement.
BUG=b:186372071
BRANCH=firmware-volteer-13672.B
TEST=emerge-volteer coreboot chromeos-bootimage
build Pass
And check the touchpad I2C5 sequence by EE.
Change-Id: I9d4dcc764edfbdc14eef5ad82db20e40b31de295
Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52690
Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to SED team provided ELAN touch screen SPEC. IRQ trigger
method need set with level trigger, that modify IRQ trigger to level
from edge.
BUG=b:174972088
TEST=Build FW and boot to OS and check with test result.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I9237d9aad6166a5754afe464ce8453129a58d283
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We no longer lock up if we clear the port 80 bit. I'm assuming this was
fixed when we configured the PSP to no longer setup eSPI.
BUG=b:183974365
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1530d08974d42e0b06eb783521dea32fca752d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
guybrush and mancomb don't configure any GPIO as PAD_SMI. Since
mainboard_smi_gpi will only get called for a GEVENT that will cause a
non-SCI SMI, this isn't expected to be called. For the unexpected and
very unlikely case that it still does get called, put a printk into
mainboard_smi_gpi to see what is happening there.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd6e3348ecc078932bf6cf5b0830b4b034d274bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52360
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
zork doesn't configure any GPIO as PAD_SMI. Since mainboard_smi_gpi will
only get called for a GEVENT that will cause a non-SCI SMI, this isn't
expected to be called. For the unexpected and very unlikely case that it
still does get called, put a printk into mainboard_smi_gpi to see what
is happening there.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I14c67b21a83b334558cdd54ebf700924aa9d0808
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52359
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Temp stack for verstage is only needed for picasso, so make it optional
in the layout file.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I44196103a3531e9d01c96ab8f454c8b580fe9807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
From cezanne we have enough space in PSP so we don't have to worry about
workbuf size. Hence the function only exists in picasso and deprecated
for later platforms.
So wrap svc_get_max_workbuf_size and provide default weak function so
future platforms don't have to implement dumb function for it.
TEST=build and boot zork, check weak function is not called in zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I16e8edf8070aaacb3a6a6a8adc92b44a230c3139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These addresses will be changed in cezanne. Before start working on
cezanne, move these out to separate header as a clean-up.
TEST=emerge-zork coreboot
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I2499281d250aae701f86bfcc87c7681e5b684b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Configure Audio Co-processor(ACP) to operate in I2S TDM mode. Also fix
the scope in which ACP is defined in the devicetree.
BUG=b:182960979
TEST=Build and boot to OS in Guybrush. Ensure that the ACPD device is
enabled in the appropriate scope in SSDT.
Change-Id: Ic90fd82e5c34a9feb9a80c4538a45e7c2fb91add
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:182960979
TEST=Build and boot to OS in Guybrush.
Change-Id: I73d1d3e5c1c4eb30ebf44f38d381beba84075351
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs.
Hence move it to the common location.
BUG=None.
TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards.
Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
All guybrush boards should have system_configuration set to 2, so
put this in the main devicetree.
BUG=b:185209734
TEST=Build & Boot guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I1ce2acb3b4ed51aa9a0aa379ed125f0b04f04d31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: chris wang <Chris.Wang@amd.com>
|
|
Some platforms which have large amounts of RAM and also write-combining
regions may decide to drop the WC regions in favor of the default when
preserving MTRRs for the OS. From a data safety perspective, this is
safe to do, but if, say, the graphics framebuffer is the region that is
changed from WC to UC/WB, then the performance of writing to the
framebuffer will decrease dramatically.
Modern OSes typically use Page Attribute Tables (PAT) to determine the
cacheability on a page level and usually do not touch the MTRRs. Thus,
it is believed to be safe to stop reserving MTRRs for the OS, in
general; PentiumII is the exception here in that OSes that still
support that may still require MTRRs to be available. In any case, if
the OS wants to reprogram all of the MTRRs, it is of course still free
to do so (after consulting the e820 table).
BUG=b:185452338
TEST=Verify MTRR programming on a brya (where `sa_add_dram_resources`
was faked to think it had 32 GiB of DRAM installed) and variable MTRR
map includes a WC entry for the framebuffer (and all the RAM):
MTRR: default type WB/UC MTRR counts: 13/9.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x00003fff80000000 type 6
MTRR: 1 base 0x0000000077000000 mask 0x00003fffff000000 type 0
MTRR: 2 base 0x0000000078000000 mask 0x00003ffff8000000 type 0
MTRR: 3 base 0x0000000090000000 mask 0x00003ffff0000000 type 1
MTRR: 4 base 0x0000000100000000 mask 0x00003fff00000000 type 6
MTRR: 5 base 0x0000000200000000 mask 0x00003ffe00000000 type 6
MTRR: 6 base 0x0000000400000000 mask 0x00003ffc00000000 type 6
MTRR: 7 base 0x0000000800000000 mask 0x00003fff80000000 type 6
MTRR: 8 base 0x000000087fc00000 mask 0x00003fffffc00000 type 0
ADL has 9 variable-range MTRRs, previously 8 of them were used, and
there was no separate entry for the framebuffer, thus leaving the
default MTRR in place of uncached.
Change-Id: I2ae2851248c95fd516627b101ebcb36ec59c29c3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
From ANX7625 spec, the delay between powering on power supplies and GPIO
should be larger than 10ms. Since it takes about 4ms for the previous
GPIO EN_PP3300_EDP_DX to be pulled up, increase the delay from 2ms to
14ms.
BUG=b:157716104
TEST=emerge-asurada coreboot
BRANCH=asurada
Change-Id: If73747bdaec5ac069b048920d27e27178bc3cedc
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This change is needed to update the option API to use unsigned integers.
The CMOS option system does not support negative numbers.
The volume field is only 8 bits long. Do not set the volume if it is out
of range. Also, use an out-of-range value as fallback to skip setting
the volume when it cannot be read using the option API, to preserve the
current behavior.
Change-Id: I7af68bb5c1ecd4489ab4b826b9a5e7999c77b1ff
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable ELAN9050 touch screen. Follow below spec:
eKTH7913U_eKTH7915U_eKTH7918U_Product Spec_V1.0_20200807 IPM-11
BUG=b:186342801
TEST=touchscreen is functional in the OS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I4c247fae33b9178c8706552aba2f950c9a674ecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Follow L850GL spec to adjust power sequence. RST need to drive low
before power on then drive to high.
SPEC:FIBOCOM_L850-GL Hardware User Manual_V1.0.8
BUG=b:186374631
TEST=WWAN is detected by lsusb.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I13357677bb1ab185abf1d4c915a762a9d6894312
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rewrite google_chromeec_status_check to use stopwatch instead of a
delay in a while loop. In practice the while loop ends up taking
much longer than one second to timeout. Using stopwatch library will
accurately timeout after one second.
BUG=b:183524609
TEST=Build and run on guybrush
BRANCH=None
Change-Id: I363ff7453bcf81581884f92797629a6f96d42580
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The board can be flashed without adding a diode by just leaving VCC
unconnected. Rework the flashing section to describes that.
Change-Id: I37d55ffdbcfba4f3a1113a82f16ec8766bbb6e6c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change replaces --diff and --fast-verify for the supported
equivalent flashrom options
Signed-off-by: Daniel Campello <campello@chromium.org>
Change-Id: I8c48c7f819f968c3ddd94278415e5e9e0ef93924
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This changes adds the EC_HOST_EVENT_USB_MUX to be dark resume source.
BUG=b:183140386
TEST=In S0ix, remove DP dongle, system does dark resume. AP and EC
synchronized. AP got port partner disconnection.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I53bd4fee21e2e2d1f16f558ab0341a50ef9a0e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52716
Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com>
Reviewed-by: Abe Levkoy <alevkoy@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vboot has been updated to track main branch, however the
.gitmodules defaults to master branch following the
coreboot default. This impacts the rebase of submodule
git submodule update --remote --rebase 3rdparty/vboot/
With this change the rebase to latest commit is successful
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Change-Id: I7713aecdec43a5d5623ef81803ac0fc02ce14070
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52664
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code is already compiled in on all platforms. Use it as it provides
the same functionality. Note that GCAP is no longer R/WO on these
platforms. However, select `AZALIA_LOCK_DOWN_R_WO_GCAP` just in case.
This will be dropped in a follow-up.
Tested on Prodrive Hermes, still detects and initializes both codecs.
Change-Id: I75424559b2b4aca63fb23bf4f8d5074aa1e1bb31
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50795
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds UART0 config in early GPIO table
Branch=None
Test=Build coreboot and boot on ADLRVP-M board. Check UART logs
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ic0cc955a02936b74f44fed55a9f4b8054646681a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52201
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't have any infrastructure setup to handle SCI SMIs. Instead of
just silently ignoring the SMI, print a warning saying that it is
being ignored.
BUG=none
TEST=Trigger an SCI SMI and see warning printed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I803e572250925b7d5ffdbb3e8958f9aff1f808df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52674
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change is needed to update the option API to use unsigned integers.
The CMOS option system does not support negative numbers. So, adjust the
call to get_int_option() to use 3 as fallback instead of -1.
Change-Id: I46c5f5c6f47f99379cbafc0d60258b99dc512e9d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Always print the chosen fan mode, not only when get_int_option() returns
the fallback value. Callers of get_int_option() should not try to handle
option-related errors, and simply proceed using the fallback value.
This change is needed to update the option API to use unsigned integers.
The CMOS option system does not support negative numbers.
Change-Id: Ic8adbe557b48a46f785d82fddb16383678705e87
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Cezanne version of psp_transfer.h lacks some necessary definitions.
Currently we don't have any plan to change transfer buffer structure in
cezanne, so just copy'em over.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I9361c4ab76c8ded06358a7718d5e447c16414721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52540
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are just copied from picasso one.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I701d6af63b24e86f8e132fad73504e20148a2bf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Define TOUCH_RPT_EN pin(GPP_A11) as the stop_gpio for the touch screen
and control TOUCH_RPT_EN pin to keep low.
BUG=b:176253069
TEST=Build and boot metaknight to OS, confirm GPP_A11 pin keep low.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I816e29eccac0f1935aeaa3b94c907870e2451e3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52653
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use `SOC_INTEL_COMMON_SKYLAKE_BASE` to simplify conditions.
Change-Id: Ie69bde31b58bbd973db00bd578a51477c5b21cab
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Intel document 335192-004 contains the PCI device IDs for Z370 and
H310C, but lacks the ID for B365. The ID appears on some websites:
https://linux-hardware.org/index.php?id=pci:8086-a2cc-1849-a2cc
Change-Id: Iea3c435713c46854c5271fbc266f47ba4573db52
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52703
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Taken from Intel document 334658-003 (7th Generation Intel Processor
Family I/O for U/Y Platforms and 8th Generation Intel Processor Family
I/O for U Quad Core Platforms, Datasheet - Volume 1 of 2).
Change-Id: I1d48c8868e1e5d453d599ecec835938ce09935d0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52702
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For brevity's sake, just print the PCH model.
Change-Id: Ib9e96683e3cb0b63a11344f3b5383292bff88e13
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52701
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code name for these PCHs is Union Point, abbreviated as `UPT`. There
are some 300-series Union Point PCHs (H310C, B365, Z370) which are meant
to be paired with Coffee Lake CPUs instead of Skylake or Kaby Lake CPUs,
and referring to them as `KBP` (Kaby Point, I guess) would be confusing.
Tested with BUILD_TIMELESS=1, HP 280 G2 remains identical.
Change-Id: I1a49115ae7ac37e76ce8d440910fb59926f34fac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52700
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These PCHs are used with Xeon-SP processors, which use different code.
Change-Id: I05f67cd57aa9f867e2fab88cd49e0384073a0b20
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52699
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Brya uses CNVi WiFi module, PCIE setting is not required.
TEST=WiFi is functional in the OS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib82c98905ed3b30075e9830c1a2638817f140abe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fan control and FireWire work fine on my board.
Signed-off-by: Stefan Ott <stefan@ott.net>
Change-Id: Idc69e902370c4094daef93e843abc6ae564625f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
AMD GPIO driver will not load if IRQ is not set. As a consequence,
it does not clear the interrupt when waking from S0i3.
BUG=178728116
TEST=Perform 2 S0i3 cycles, confirming second cycle does not return
instantly due to first interrupt not being cleared.
Change-Id: I3072263e8e68f939a47ed4125444c60133087824
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Drop Vref verbs from the baseboard table as it's not required for
Rev. 3 and earlier.
Change-Id: I41c207f97dad6c9107c1999eb46d2d6304a6c217
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add PLL and clock init code.
Add frequency meter and API for raising little CPU/CCI frequency.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I8ded0236d10826687f080bd5a213feb55d4bae03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52667
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PMIC drivers can be shared by MT8192 and MT8195.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Ie17e01d25405b1e5119d9c70c5f7afb915daf80b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This change fixes two problems:
1) We had the enum values for .direction and .level swapped. The naming
is very confusing...
2) ESPI_SYS is not a good event to use for EC SCI. It is a level/low
event that is only cleared by reading the eSPI status register 0x9C.
Cezanne has added a new event source that directly exposes the SCI bit.
This is the correct event source to use for EC SCI.
BUG=b:186045622, b:181139095
TEST=`lpc sci` on EC console and see /proc/interrupts increase by 1
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I764b9ec202376d5124331a320767cbf79371dc07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Newer Intel SoCs also support _PRT tables, but they route PCI devices to
more than just PIRQs, and statically specify IRQs instead of using link
devices. Extend/refactor intel_acpi_gen_def_acpi_pirq to support this
additional use case.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ica420a3d12fd1d64c8fe6e4b326fd779b3f10868
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable the AMD Turbo Core a.k.a. AMD Core Performance Boost (CPB)
feature [1] for f15tn boards - like it's already done for f14 and f16kb.
According to CB:51394 [2] it improves the performance of Lenovo G505S by
up to 50%, and is unlikely to cause regressions for the other boards.
[1] https://en.wikipedia.org/wiki/AMD_Turbo_Core
[2] https://review.coreboot.org/c/coreboot/+/51394
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I1eaa8ff3953c492e8f9431d7b4a09b86e0ef77a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
I have a Lenovo X200, a Lenovo X201 and an Asus P5Q.
Signed-off-by: Stefan Ott <coreboot@desire.ch>
Change-Id: I9577a848cb799fca237487fc20d6aa9135599f4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52593
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Roll back CPU slow slew rate setting to Intel default "SLEW_FAST_2"
Because baseboard modify slow slew rate setting to "SLEW_FASE_8"
for all project, but Lindar and Lillipup is using "SLEW_FAST_2",
so this setting need to roll back.
BUG=b:186140230
TEST=Build FW and boot to OS checking with CPU log.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I7de252b26c75f8dad218f3eb79a0988e60964f4c
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52620
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables STAPM power management. Values follow the AMD
specification.
BUG=b:185209734
TEST=Build & Boot guybrush
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ib9f2ec9a8ac118c55ae53b9419ea4ff74ce7b599
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: chris wang <Chris.Wang@amd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Like the Picasso platform, it's very useful to have units on these
variables.
BUG=b:185209734
TEST=Build & Boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I592c807c5e9a2c17b1c5959e56a01237352c5204
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
These values will be added in the upcoming STAPM configuration update.
BUG=b:185209734
TEST=Build & Boot guybrush
Cq-Depend: chrome-internal:3780259
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I2a6835c16badfe505e3c33b356ca671766cd6972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: chris wang <Chris.Wang@amd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
https://tech-docs.system76.com/models/oryp6/README.html
Tested with TianoCore (UefiPayloadPkg).
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots
- M.2 NVMe
- M.2 SATA
- MicroSD card slot
- All USB ports
- Integrated graphics using Intel GOP driver
- Webcam
- Ethernet
- Internal microphone
- Combined headphone + mic 3.5mm jack
- Combined microphone + S/PDIF 3.5mm jack
- Booting to Ubuntu Linux 20.10 and Windows 10
- Flashing with flashrom
Not working:
- S3 suspend/resume: System hangs on wake from S3
- Discrete/Hybrid graphics: Requires a new driver
- Internal speakers: Enabled in separate patch
Not tested:
- Thunderbolt functionality
- S/PDIF output
Change-Id: If017d65ca6cb36fe1f631d4dadd050a1547c93fa
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47768
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 and Purism Librem 13 v1
remain identical.
Change-Id: I74b633fb0b012304b5b4bd943272ed82dcb6f7d5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52468
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Linux kernel now uses S5 for reboot, which makes reboot fail if EC
SLPT bit is set.
Tested on HP EliteBook 2560p, reboot and S3 resume work after this
change.
Change-Id: I9b3ea737f85cc4045714263657bcdaac08f3a20d
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
No code in coreboot uses this option, so it might as well be dropped.
Change-Id: Ie58bab7e87831db08b9f398a777ba350920b707b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52639
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove CMOS options that are not read anywhere in the code. They may
have been used in the native AMD platform code, or got copied around
from board to board and never did anything to begin with.
Change-Id: Ib19ace4fa6e610a28e68fe2612b4e623f200f064
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52638
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
