summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-20arm_tf: Fix code style nits and commentsSimon Glass
Tidy up a few things which look incorrect in this file. BUG=chrome-os-partner:56314 BRANCH=none TEST=build for gru Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 434e9ceb5fce69b28de577cdc3541a439871f5ed Original-Change-Id: Ida7a62ced953107c8e1723003bcb470c81de4c2f Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376848 Original-Commit-Ready: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: If8c283fe8513e6120de2fd52eab539096a4e0c9b Reviewed-on: https://review.coreboot.org/16584 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
In kernel side we set 1.1v for 1.5G, even for coreboot RO, a higher voltage could be safer, 1.2v now seems too high. BRANCH=none BUG=chrome-os-partner:56948 TEST=bootup Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380896 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20rockchip: spi: Improve SPI read efficiencySimon Glass
The SPI driver is quite slow at reading data. For example, with a 24MHz clock on gru it achieves a read speed of only 13.9Mbps. We can correct this by reading the status registers once, then reading as many bytes as are available before checking the status registers again. It seems likely that a status register read requires synchronizing with the SPI FIFO clock domain, which takes a while. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru and see the speed increase from 13.920 Mbps to 24.712 Mbps Change-Id: I24aed0c9c6c5445634c4e056922afaee4e9a7b33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 49c2fc20d7d7d703763e9b0a6f68313a349a84b9 Original-Change-Id: I42745f01f0fe069f6ae26d866004d36bb257e6b2 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376945 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Veyron: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted Jerry Change-Id: Ia19d585b69e7701040209e8bf0b8a6990a166c95 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e7a42c999673ebd89c5b30845a4a5ec93852166 Original-Change-Id: I126cb7077c834e1a8b0a625a592dce8789b5876c Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376884 Reviewed-on: https://review.coreboot.org/16581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20google/gru: Fix up PWM regulator rangesJulius Werner
We did yet another small adjustment to the PWM regulator ranges for Kevin rev6... this patch reflects that in code. Also rewrite code and descriptions to indicate that these new ranges are not just for Kevin, but also planned to be used on Gru rev2 and any future Gru derivatives (which as I understand it is the plan, right?). BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted my rev5, for whatever that's worth... Change-Id: Id78501453814d0257ee86a05f6dbd6118b719309 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e8be3f09ac16c1c9782dee634e5704e0bd6c7f9 Original-Change-Id: I723dc09b9711c7c6d2b3402d012198438309a8ff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/379921 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16580 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Gru: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted kevin-tpm2 Change-Id: I2fc943f89386ccc6cd9293f5811182a5a51d99b0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bb1f0fb00d023c045305edc6c9fc655b764a4e8c Original-Change-Id: Ieb61830b9555da232936087cdcf7c61a1e55bab4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376883 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16579 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20vboot/vbnv_flash: Binary search to find last used entryRandall Spangler
This improves the previous linear search to O(log n). No change in storage format. BUG=chromium:640656 BRANCH=none TEST=Manual (test empty) flashrom -i RW_NVRAM -e Reboot; device should boot normally. (start using records) crossystem kern_nv=0xaab0 crossystem recovery_request=1 && reboot Device should go into recovery mode with reason 1 Reboot again; it should boot normally. crossystem kern_nv (should still contain 0xaab0) Repeat steps several times with request=2, 3, etc. flashrom -i RW_NVRAM -r nvdata Modify nvdata to copy the first record across all valid records flashrom -i RW_NVRAM -w nvdata Reboot; device should boot normally. Change-Id: Ieb97563ab92bd1d18a4f6a9e1d20157efe311fb4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: db9bb2d3927ad57270d7acfd42cf0652102993b1 Original-Change-Id: I1eb5fd9fa6b2ae56833f024bcd3c250147bcc7a1 Original-Signed-off-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376928 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16577 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20checkpatch.pl: ignore '#define asmlinkage'Martin Roth
checkpatch warns that the asmlinkage storage class should be at the beginning of the declaration when we define it to be an empty value. Change-Id: I12292d5b42bf6da9130bb969ebe00fca8efcf049 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16358 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20lint/lint-007-checkpatch: Update lint scriptMartin Roth
- Check Kconfig files as well. - Accept a list of directories to check as a command line argument. - Only look at src & util directories by default. - Skip src/vendorcode. - Remove bypass of payloads/coreinfo/util/kconfig directory, it no longer exists. Change-Id: Ia522d3ddc29914220bdaae36ea23ded7338c48fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16359 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/via: Add space around operatorsElyes HAOUAS
Change-Id: I87f8978b8ec6ddc11dd66a77cbb630e057f9831b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16623 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-09-20northbridge/intel/e7505/debug.c: Improve code formattingElyes HAOUAS
Change-Id: I63f58d95fa01b1f73f3620a5d13f21ef62e2404c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Makefile: Give .ali files an empty recipeNico Huber
For Ada sources, .ali files are emitted together with their respective .o files during compilation. To convince `make` that an .ali was updated when the .o was rebuilt, it needs an empty recipe. Change-Id: Ie47122ff3d00460600ed1db97362abf68f59b751 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16639 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/a-trend - emulation: Add space around operatorsElyes HAOUAS
Change-Id: Ib00a9b2feb723d46642d86b2706728bbca7dd68d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16616 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-09-20northbridge/intel/i3100: Add space around operatorsElyes HAOUAS
Change-Id: I5ff894f23dc2a2c59bc5e5d1de4287a6b9c9922c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16625 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/i945: Add space around operatorsElyes HAOUAS
Change-Id: I24505af163544a03e3eab72c24f25fcdc4b1b16c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16624 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/amd/agesa: Improve code formattingElyes HAOUAS
Change-Id: If700dc5fa9ae33649993557f71db0fe1eb76204b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16634 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/e7505: Improve code formattingElyes HAOUAS
Change-Id: I964512c0e913f7443f3dea859b01358645cfd8a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16632 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/superio: Add space around operatorsElyes HAOUAS
Change-Id: Ibeab5e7fe0a9005e96934b3b43cfb247ef2e2340 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16615 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-20src/include: Add space around operatorsElyes HAOUAS
Change-Id: I0ee4c443b6861018f05cfc32135d632fd4996029 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16614 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-20northbridge/intel/i82830: Add space around operatorsElyes HAOUAS
Change-Id: Ic4e287209cc45fae574e7af9d45b8a0e648ef686 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16627 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/haswell: Add space around operatorsElyes HAOUAS
Change-Id: I8fa1e39bfd950475e3b55d6debcbfd92615aa379 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16628 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/e7501: Add space around operatorsElyes HAOUAS
Change-Id: I53aa17076135e55665f2f7c6ede217388fc50cca Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16633 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/fsp_rangeley: Add space around operatorsElyes HAOUAS
Change-Id: Ia60729db83333c1159862cf604de321e3af8dcb1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16631 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20southbridge/via: Add space around operatorsElyes HAOUAS
Change-Id: Ib48c98bb161b92b28497df26fcfd0eae2c6829df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16635 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/fsp_sandybridge: Add space around operatorsElyes HAOUAS
Change-Id: I1b5cdfaf39be639a7ef71e66e91284fa186fbb86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16630 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20northbridge/intel/gm45: Add space around operatorsElyes HAOUAS
Change-Id: I3781c36a3f354bfd54d20488b95d4f2307c3bce2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16629 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20southbridge/amd: Add space around operatorsElyes HAOUAS
Change-Id: I949ff7de072e5e0753d9c8ff0bf98abfca25798b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16637 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "drivers/i2c/tpm: Move common variables to header"Duncan Laurie
This reverts commit 64df72e8e2d1c086705325533767ca5e201e842a.
2016-09-19Revert "drivers/i2c/tpm: Split cr50 driver from main driver"Duncan Laurie
This reverts commit c565f9910707b91fcc7a27bab28806e558bb474d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Reduce max buffer size"Duncan Laurie
This reverts commit 97a2a1ece152b6d40a524361721405b77c37959d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up timeouts"Duncan Laurie
This reverts commit 93c778688f0bf2f90334505a3082a2cd4ce1623a.
2016-09-19Revert "drivers/i2c/tpm/cr50: Rename i2c read/write functions"Duncan Laurie
This reverts commit 6f5ceb26b9b3e1455ebbd6192e1d2c832bddc77e.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up locality functions"Duncan Laurie
This reverts commit 557e1a729a9ca89e814220b6203b7ac0dc446913.
2016-09-19Revert "drivers/i2c/tpm/cr50: Improve data handling and function names"Duncan Laurie
This reverts commit 1241e7db55aff313e56bf4546d969c11368b08a2.
2016-09-19Revert "x86: acpi: Add function for querying GPE status"Duncan Laurie
This reverts commit 884dfe632940b940df68d09f997fa5cd25121def.
2016-09-19Revert "soc/intel/apollolake: Initialize GPEs in bootblock"Duncan Laurie
This reverts commit 5e3dad66227bba4be9365ee76d00231bb5577b56.
2016-09-19Revert "soc/intel/apollolake: Add function to read and clear GPE status"Duncan Laurie
This reverts commit 3d43a7c111d00be246160a04023fe438ae0cac57.
2016-09-19Revert "drivers/i2c/tpm/cr50: Support interrupts for status"Duncan Laurie
This reverts commit a5e419c51187d24818f056327746a18676fe3a20.
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
This reverts commit 24de342438208d9b843e87627f15b9a272285b0f.
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: I28ade5ee3bf08fa17d8cabf16287319480f03921 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: I9f78f520fd089cb4471d8826a8cfecff67398bf8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Add function to read and clear GPE statusDuncan Laurie
Implement the generic acpi_get_gpe() function to read and clear the GPE status for a specific GPE. Tested by watching GPE status in a loop while generating interrupts manually from the EC console. BUG=chrome-os-partner:53336 Change-Id: Id885e98d48c2133a868da19eca3360e2dfb82e84 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Initialize GPEs in bootblockDuncan Laurie
Initialize the GPEs from mainboard config in bootblock, so they can be used in verstage to query latched interrupt status. I still left it called in ramstage just to be sure that the configuration was not overwritten in FSP stages. Tested by reading and reporting GPE status in a loop in verstage and manually triggering an interrupt on EC console. BUG=chrome-os-partner:53336 Change-Id: I1af3e9ac1e5c59b9ebb5c6dd1599309c1f036581 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19x86: acpi: Add function for querying GPE statusDuncan Laurie
Add a function that can be implemented by the SOC to read and clear the status of a single GPE. This can be used during firmware to poll for interrupt status. BUG=chrome-os-partner:53336 Change-Id: I536c2176320fefa4c186dabcdddb55880c47fbad Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: I7e3912fb8d8c6ad17d1af2d2a7189bf7c0c52c8e Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifa1445224b475aec38c2ac56e15cb7ba7fcd21ea Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: Ib4a68ce1b3a83ea7c4bcefb9c6f002f6dd4aac1f Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: I77fdd7ea646b8b2fef449f07e3a08bcce174fe8b Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: Ia88facca607f3fd5072d0d986323fde075f15855 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: Ia9a65e72519b95f5739e3b7a16b9c2431d64ebe2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: I0febe98620d0ddd4ec6b46cd3073e48c12926266 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19driver/intel/fsp1_1: Utilise soc/intel/common for adding vbt.binNaresh G Solanki
Remove fsp1.1 driver code that adds vbt.bin & use soc/intel/common instead to add vbt.bin in cbfs. Also, VBT blob is added to CBFS as RAW type hence when walking the CBFS to find vbt.bin, search with type as RAW. Change-Id: I08f2556a34f83a0ea2b67b003e51dcace994361b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16610 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19mainboard/google/reef: Configure WLAN as wake sourceVaibhav Shankar
This implements PRW method for WLAN and configures PCIe wake pin to generate SCI. BUG=chrome-os-partner:56483 TEST=Suspend the system into S3 or S0ix. System should resume through wake event from wifi. Change-Id: I9bd078c2de19ebcc652b5d981997d2a5b5f0b1b7 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16611 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: Configure ACPI name for PCIeVaibhav Shankar
This implements acpi name for PCIe root port. BUG=chrome-os-partner:56483 Change-Id: Ifec1529c477f554d36f3932b66f62eea782fdcaa Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16621 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19kunimitsu: Remove incorrect dereferencing of pointerRizwan Qureshi
In spd_util.c function mainboard_get_spd_data(), spd_file can either be NULL or will point to the first byte of the SPD data, and should not be dereferenced. Change-Id: I08677976792682cc744ec509dd183eadf5e570a5 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16612 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19gm45/gma.c: use correct id string for fake VBTArthur Heymans
The correct id string for gm45 is "$VBT CANTIGA ". This can be found in the gm45 option rom: "strings vbios.bin | grep VBT". Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16551 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-19nb/gm45/gma.c: enable VESA framebuffer mode on VGA outputArthur Heymans
This implements "Keep VESA framebuffer" behavior on VGA output of gm45. This patch reuses Linux code to compute vga divisors. Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16338 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-19gm45/gma.c: use screen on vga connector if connectedArthur Heymans
The intel x4x and gm45 have very similar integrated graphic devices. Currently the x4x native graphic init enables VGA, while gm45 can output on LVDS. This patch reuses the x4x graphic initialisation code to enable output on VGA in gm45 in a way that the behavior is similar to vbios: If no VGA display is connected the internal LVDS screen is used. If an external screen is detected on the VGA port it will be used instead. Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16295 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: always enable BOOTBLOCK_CONSOLEAaron Durbin
In order to ensure bootblock console output shows up in cbmem console unconditionally select BOOTBLOCK_CONSOLE. BUG=chrome-os-partner:57513 Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16622 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: enable postcar consoleAaron Durbin
Unconditionally turn on postcar console for apollolake. BUG=chrome-os-partner:57513 Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16620 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19arch/x86,lib: make cbmem console work in postcar stageAaron Durbin
Implement postcar stage cbmem console support. The postcar stage is more like ramstage in that RAM is already up. Therefore, in order to make the cbmem console reinit flow work one needs the cbmem init hook infrastructure in place and the cbmem recovery called. This call is added to x86/postcar.c to achieve that. Additionally, one needs to provide postcar stage cbmem init hook callbacks for the cbmem console library to use. A few other places need to become postcar stage aware so that the code paths are taken. Lastly, since postcar is backed by ram indicate that to the cbmem backing store. BUG=chrome-os-partner:57513 Change-Id: I51db65d8502c456b08f291fd1b59f6ea72059dfd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16619 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19arch/x86: move postcar main logic into CAaron Durbin
The console_init(), MTRR printing, and loading ramstage logic was previously all in assembly. Move that logic into C code so that future features can more easily be added into the postcar boot flow. BUG=chrome-os-partner:57513 Change-Id: I332140f569caf0803570fd635d894295de8c0018 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16618 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19console: honor CONFIG_POSTCAR_CONSOLEAaron Durbin
The declarations for console_init() were unconditionally exposed even though there is a Kconfig option. Correct this by honoring the CONFIG_POSTCAR_CONSOLE condition. BUG=chrome-os-partner:57513 Change-Id: Id45ae3d7c05a9f4ebcf85c446fc68a709513bb0f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16617 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: cache boot media post romstageAaron Durbin
When the boot media is memory mapped mark it as cacheable after romstage. Otherwise the boot media is uncacheable and all loads from it take longer. Loading FSP-S alone in ramstage went down to 17.5ms from 54ms. BUG=chrome-os-partner:56656 Change-Id: I6703334ba8fe98aca26ba1c995d6d3abb0ddef33 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16613 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19Add minimal GNAT run time system (RTS)Nico Huber
Add a stripped-down version of libgnat. This is somehow comparable to libgcc but for Ada programs. It's licensed under GPLv3 but with the runtime library exception. So it's totally fine to link it with our GPLv2 code and keep it under GPLv2. Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/11836 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-09-19Make Ada a first class citizenNico Huber
Some remarks on the make process: o We usually leave Ada specs (.ads files which are like c headers) together with the bodies (implementations in .adb files) in one directory. So we have to know, where they live. o If there is no matching .adb an .ads is a valid source file and we'll generate an object file from it. o Object files need to have the same basename as their source files :-/ That's why we put them in build/<class>/ dirs now. o We track dependencies by looking at the compiler output (.ali files which accompany every .o). This way we don't need any gnatmake magic, or even more complex, less portable tools. For ADAFLAGS_common, I simply copied the CFLAGS_common whilst dropping everything unsupported and adding sane warning options. The set of language features is highly restricted (see gnat.adc). This should suit the embedded nature of coreboot and helps proving absence of runtime errors with SPARK. Change-Id: I70df9adbd467ecd2dc7c5c1cf418b7765aca4e93 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13044 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2016-09-15mainboard/reef: add variant support to ASL codeAaron Durbin
There are certain board-specific options for reef variants. The big one is the DPTF settings. Rearrange the ASL files such that dsdt.asl is the main landing area. The ACPI options for Chrome EC are contained in the variant/ec.h header so the actual code #includes can just reside in dstd.asl. Since most of the mainboard specific peripherals are auto generated by the acpigen from devicetree there's no real separate need for mainboard.asl. The one thing not addressed in this CL is the notion of a variant having the Chrome EC or not (along with lid, etc). Future indirection can be provided when needed to address that requirement. BUG=chrome-os-partner:56677 Change-Id: I5c888f5fc64913dcff010c28f87e69ac5449e6b6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16604 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15util/release: make release archives reproducibleAlexander Couzens
tar doesn't sort by default and takes the order of the OS which is in most cases the order of creation. Sort by name and set influencing environment TZ and language to be reproducible. Change-Id: I3d043952417000d12e81353677f1ea4aa2da4fc1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16556 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-15soc/apollolake: Set up GPIO_TIER1_SCI_EN properlyShaunak Saha
Currently we are setting the gpio_tier1_sci in smihandler before going to S3. But this won't work for S0iX as it happens from Linux kernel and SMI handler is not involved in that flow. We need to set this bit i.e. bit 15 in ACPI gpe0a register at 0x430h. The Linux kernel before going to sleep checks what values are passed through ASL as wake events (through _PRW), keeps those enabled only and clears other bits in gpe0 enable registers. So we need to inform the kernel to keep gpio_tier_sci also set as these are needed for any wake event. This patch adds ASL code for sleep button device with HID id PNP0C0E. We are adding _PRW method for sleep button device with this patch. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: Ie8517cad9cd37c25788c22250894d4f9db344ff9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16564 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15mainboard/bap/ode_e20XX: Change SATA from GEN2 to GEN3Fabian Kunkel
This patch disables the SataSetMaxGen2 flag. This flag is a power saving option, which forces the SATA to GEN2. Payload SeaBIOS 1.9.1, Lubuntu 16.04, Kernel 4.4. $ dmesg | grep ahci #before patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode $ dmesg | grep ahci #after patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Change-Id: I48361190969e6d38ddb5692f5e54b016b359fbb1 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15906 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15lenovo: add ps2 spinup timeout to all H8S based boardsAlexander Couzens
The h8s needs around 3s to respond to ps2 commands Change-Id: I0cf01969975b8dd3839eadf90cb2dac0f1eaafc4 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16505 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15northbridge/intel/nehalem/gma.c: Improve code formattingElyes HAOUAS
Change-Id: Ie7ee547ab34441f93433936334e9881dd7cc0371 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16599 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15southbridge/sis/sis966/lpc.c: Improve code formattingElyes HAOUAS
Change-Id: I5cd04d49e90502394b4dd84f6a5a727e02f19fdc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16601 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15northbridge/amd/amdk8/raminit_f_dqs.c: Improve code formattingElyes HAOUAS
Change-Id: Ib1f9926ced1fd382c782f5098eb1ad98330cf655 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16600 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15northbridge/amd/amdk8/coherent_ht.c: Improve code formattingElyes HAOUAS
Change-Id: I296254d61fdc5c120e1e2abcbecb4677f3216d26 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16598 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15camelbackmountain_fsp: Select SERIRQ_CONTINUOUS_MODEWerner Zeh
In commit 4f2754c 'fsp_broadwell_de: Add Kconfig switch for SERIRQ operation mode' the default operation mode of SERIRQ was changed from continuous to quiet. Set the mode to continuous for this mainboard to keep the behavior unchanged. Change-Id: I7c3675d4ee8cff428621f4e64411738193e654b2 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16576 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-15checkpatch.pl: Force raw_line to return a defined valueMartin Roth
Fixes the warning: Use of uninitialized value in concatenation (.) or string at util/lint/checkpatch.pl line 4739 Change-Id: Idc3c631735a595517d77cb8b8ec67e1ac00b6685 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16357 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-09-15lint/checkpatch.pl: Pull in coreboot fixesMartin Roth
This pulls in two fixes that were added to coreboot's checkpatch.pl script: - commit 82ef8ada (src/commonlib/lz4_wrapper: Correct inline asm for unaligned 64-bit copy): modify checkpatch.pl to ignore spaces before opening brackets when used in inline assembly. - commit ebef00fa (lint/checkpatch.pl: escape \{ in perl regex to fix warnings): Unescaped left brace in regex is deprecated, passed through in regex; Change-Id: Ia2c712c5b1bb5f67953a9098b5a076e31e3bd8d3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-09-15southbridge/amd/sr5650/sr5650.c: Update acpi_fill_ivrsMartin Roth
- Update lines to make them shorter than 80 chaacters - Update using #defines from acpi_ivrs.h Change-Id: I1bf6cdac00e28f5b0969fd8f98e37c66f8e43110 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16568 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-15arch/acpi_ivrs.h: Update 8-byte IVRS entry valuesMartin Roth
I put in the decimal values for these instead of the hex values. Instead of running them through a BCD converter, update them to use the hex values. Change-Id: I3fa46f055c3db113758f445f947446dd5834c126 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16567 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-15amd/sr5650: Update add_ivrs_device_entriesMartin Roth
Functionally, this should be roughly the same. The only real difference should be removing the 4 bytes of padding from the end of the 4 byte entries. The spec mentions a boundary for the 4 byte entries (which we are ignoring), but doesn't mention a boundary for the 8 byte entries, and I can't think of any other reason that the padding might be needed. - Wrap long lines. - Combine if statements to clean up indentation. - Use #defines from acpi_ivrs.h to make commands easier to understand. - Remove padding from 4 byte entries that made them 8 bytes in length. - Set the pointer p at init, and clear the value at p if the device we're looking at is enabled instead of setting p in every if statement. - Look at the command type to update current and length. - Treat malloc & free as if they were typical instead of coreboot specific versions. Check to make sure the malloc worked and only free on the last loop instead of every time. Change-Id: I79dd5f9e930fad22a09d1af78f33c1d9a88b3bfe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16532 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-15google/reef: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
This patch removes setting of gpio_tier1_sci_en from mainboard smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl now. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: I26fd3fd9fcc83c988bcff1bda4da7a2e3da98ce6 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16566 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-15intel/amenia: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
This patch removes setting of gpio_tier1_sci_en from mainboard smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl now. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: I066f0907a1c597e6fee09821910c59a8a90cccaa Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16565 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-09-15driver/intel/fsp20: move lb_framebuffer functionNaresh G Solanki
move lb_framebuffer function in soc/intel/apollolake to driver/intel/fsp20 so that fsp 2.0 bases soc's can use common lb_framebuffer function. Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15kunimitsu: Add FSP 2.0 support in romstageRizwan Qureshi
Populate mainboard related Memory Init Params i.e, SPD Rcomp values, DQ and DQs values. Change-Id: Id62c43a72a0e34fa2e8d177ce895d395418e2347 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16316 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-15soc/intel/skylake: Add FSP 2.0 support in romstageBarnali Sarkar
Populate SoC related Memory initialization params. Post memory init, set DISB, setup stack and MTRRs using the postcar funtions provided in postcar_loader.c. TEST=Build and boot kunimitsu, dram initialization done. ramstage is loaded. Change-Id: I8d943e29b6e118986189166d92c7891ab6642193 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-15driver/intel/fsp2_0: Make FSP-M binary XIPRizwan Qureshi
If FSP_M_XIP is selected, then relocate FSP-M binary while adding it in CBFS so that it can be executed in place. Change-Id: I2579e8a9be06cfe8cc162337fb1064d15842229f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16563 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-15cbmem: Exit with an errorlevel of 0 after printing helpMartin Roth
cbmem --help should not return an error to the OS. Change-Id: Id00091c679dbb109bc352cf8a81d67c2ae5666ec Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16574 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-14drivers/i2c/tpm: Clean up handling of command readyDuncan Laurie
The TPM driver was largely ignoring the meaning of the command ready bit in the status register, instead just arbitrarily sending it at the end of every receive transaction. Instead of doing this have the command ready bit be set at the start of a transaction, and only clear it at the end of a transaction if it is still set, in case of failure. Also the cr50 function to wait for status and burst count was not waiting the full 2s that the existing driver does so that value is increased. Also, during the probe routine a delay is inserted after each status register read to ensure the TPM has time to actually start up. Change-Id: I1c66ea9849e6be537c7be06d57258f27c563c1c2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16591 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-09-14lpss_i2c: Add Kconfig option to enable debugDuncan Laurie
It is very useful to have the ability to see I2C transactions performed by the host firmware. This patch adds a simple Kconfig option that will enable debug output. Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16590 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14lpss_i2c: Change handling of controller enable/disableDuncan Laurie
This change modifies the lpss_i2c driver to behave more like the Linux kernel driver. In particular the controller is only enabled when processing a transaction, and is disabled after. This means that errors in one transaction will not affect later transactions. Also when disabling the controller the code is supposed to wait on the enable bit in the "enable status" register and not in the enable control register. In order to get access to this register the reg map was expanded to include all registers. This was tested with the cr50 TPM driver to ensure that if a transaction does fail that it can be successfully retried instead of the bus being unusable. Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16589 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14mainboard/intel/amenia: Configure PERST_0 pinVaibhav Shankar
Configure PERST_0 and assign the pin in devicetree. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I39b4d8bba92f352ae121c7552f58480295b48aef Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16350 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14mainboards/apollolake: Set RAPL power limit PL1 value to 12W.Sumeet Pawnikar
This patch sets tuned RAPL power limit PL1 value to 12W in acpi/dptf.asl for RAPL MSR register. With PL1 as 12W for WebGL and stream case, we measured SoC power reaching upto 6W. Above 12W PL1 value, we observed that Soc power going above 6W. With PL1 as 12W, system is able to leverage full TDP capacity. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: I8185ce890f27e29bc138ea568af536bc274fe7b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16596 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14soc/intel/apollolake: Update PL1 value in RAPL MMIO registerSumeet Pawnikar
Due to an incorrect value set for the power limit PL1, the system is not able to leverage full TDP capacity. FSP code sets the PL1 value as 6W in RAPL MMIO register based on fused soc tdp value. This RAPL MMIO register is a physically separate instance from RAPL MSR register. This patch sets PL1 value to 15W in RAPL MMIO register. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16595 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14mainboard/google/reef: Configure PERST_0 pinVaibhav Shankar
This configures PERST_0 in devicetree. For boards without PERST_0, the pin should be disabled. For boards with PERST_0 the correct GPIO needs to be assigned. BUG=chrome-os-partner:55877 Change-Id: I705009b480e02b4c9b2070bb4f82cb4d552e9a46 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-14soc/intel/apollolake: Add PM methods to power gate PCIeVaibhav Shankar
This implements GNVS variable to store the address of PERST_0, _ON/_OFF methods to power gate PCIe during S0ix entry, and PERST_0 assertion/de-assertion methods. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14soc/intel/apollolake: initialize GNVS structure to 0Aaron Durbin
The code was not previously initializing the GNVS structure to all 0's in the ACPI write tables path. Fix this and also rearrange the ordering of updating the fields to only handle the chip_info specific bits till last such that most of the structure is filled in prior to bailing out in the case of a bad devicetree. Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16597 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:33:01 +0000