summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-23mb/asus/p8h61-m_pro: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23nb/intel/i945: Remove dead codeElyes HAOUAS
Regarding "Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family", Document Number: 307502-005, page 91, if Channel B is empty, all of the C1DRBs are programmed with the same value as C0DRB3. Mobile 945 express chipset datasheet doesn't mention this specific case. Change-Id: Ic26103aac7f920e5696b445e125d33405df4f43b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27204 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23soc/intel/cannonlake: Disable UART_DEBUG by defaultSubrata Banik
This patch ensures serial debug is not enabled by default on Cannonlake platform. Change-Id: Id925c8c73971a027e45ea3c61e878f134bc9feff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/octopus: Update GBB_FLAG_DISABLE_EC_SOFTWARE_SYNCFurquan Shaikh
Move GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC under each variant config and select it for bip and fleex only. Functional change in this CL is that EC SW sync will be enabled for phaser. BUG=b:110523400 Change-Id: If6f37c6b2ee71130b9ed5b10ce92fb23fa1c39fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22sdm845: increase SRAM for bootblockT Michael Turney
Bootblock has grown beyond 32K, grow to 40K Change-Id: Iedc52151e223ebf4ff5b35a419b5378a6f1c661b Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-22libpayload: cheza - fix config for chromium chroot buildT Michael Turney
Add CONFIG_LP_CHROMEOS to configuration file Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22cbfstool/fit.c: Fix for older CPUs without total_size in mcu_headerArthur Heymans
Some older CPUs have a fixed size of 2048 bytes for microcode total size. Change-Id: Ia50c087af41b0df14b607ce3c3b4eabc602e8738 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27090 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/cannonlake: Remove DMA support for PTTSubrata Banik
Alternative buffer communication support for PTT is no longer needed for CNL onwards and coreboot does not need to reserve additional 4KiB memory for PTT support. Change-Id: I11993cef77fd5e879eedabc1ed344f91f8257c90 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21inteltool: Add PCI IDs for the C220 PCH seriesqeed
Adds missing PCI IDs to allow tool to dump the C220 PCH (8 series) southbridge. Intel Document 328904 is the datasheet for this PCH. Change-Id: I07a8f2e9cb0ee8677c8fe2c51881147ed81c1a35 Signed-off-by: Quan Tran <qeed.quan@gmail.com> Reviewed-on: https://review.coreboot.org/27168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-21tianocore: Fix RPM package namePatrick Rudolph
The packge uuid-devel doesn't provide the required files, but libuuid-devel does. Change-Id: I61d537e4f1fca0d7172c129a75e13aa58452763f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21soc/intel/apollolake: unify definition for spi base addressBora Guvendik
Use SPI_BASE_ADDRESS instead of PRERAM_SPI_BASE_ADDRESS like big core in order make common code implementation straightforward. Change-Id: Ibcb013fc95de29234253e89c9ca100cc468d44f6 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/27097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21soc/intel/common: Make infrastructure ready for Intel common stage filesSubrata Banik
Select all Kconfig belongs into Intel SoC Family basecode/stage files and include required headers from include/intelbasecode/ files. BUG=None BRANCH=none TEST=Code is compiling with cannonlake configurations and also booting on cannonlake RVP. Change-Id: Iac99b4346e8bf6e260b00be9fefede5ad7b3e778 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-21sb/intel/i82801xx: Use common RCBA MACROsArthur Heymans
Change-Id: I61fb3b01ff15ba2da2ee938addfa630c282c9870 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21sb/intel/common/rcba_pirq.c: Use common RCBA acces MACROsArthur Heymans
Change-Id: I2fe8d8388cb96e42af4f9be251a41cceeb2e4710 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27042 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21sb/intel/common: Make RCBA manipulation MACROs commonArthur Heymans
No Change in BUILD_TIMELESS. Change-Id: I634526269d45ebdc6c31cdc28d9ec846b397211d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21Revert "sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location"Arthur Heymans
In the end it does not look like RCBA register offsets are fully compatible over southbridges. This reverts commit d2d2aef6a3222af909183fb96dc7bc908fac3cd4. Is squashed with revert of "sb/intel/common: Fix conflicting OIC register definition" 8aaa00401b68e5c5b6c07b0984e3e7c3027e3c2f. Change-Id: Icbf4db8590e60573c8c11385835e0231cf8d63e6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21util/abuild: Fix building when not in coreboot root dirArthur Heymans
Change-Id: Ibe54096f275a05bda745ae2cc76c0109281c0c4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21soc/amd/stoneyridge/southbridge.c: Store PM related registers in cbmemRichard Spiegel
PM registers used for generating SWS values are being stored in a static variable within southbridge.c. In order to have it available for any source involved in building the platform, move the storage to cbmem, using id CBMEM_ID_POWER_STATE. Also add a variable that informs from which state the system is waking from, extracted from register ACPI_PM1_CNT_BLK. This variable will later be useful in detecting failed S3 resume. BUG=b:80119811 TEST=Add code to print SWS parameters and state it's waking from. Build and boot grunt, suspend and resume, check output for valid values. Remove the print code. Change-Id: Ib27a743b7e7f8c94918caf7ba5efd473f4054986 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27109 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21drivers/ati/ragexl: Remove dead codeArthur Heymans
Is unused in the tree. Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22132 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21google/lars,lili: Add SPD mapping for Hynix 8GB configren kuo
Upstreaming Chromium commit 0bc6c43: Lili: Update Memory IDs TEST=Build and boot up on lili board Original-Change-Id: I6da1e97820b1bf2e751102384eed07236143fe2b Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/956782 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Icf6588582da3b4a7861bced539d51a914b011dc4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27135 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21payloads/external/GRUB2: Use pkg-config over freetype-configNico Huber
`freetype-config` is gone and was obsolete for a long time. Change-Id: Id3058e55b1630f43225d3cd1ad91801c4085874f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21mb/lenovo/t520: Add Dual Graphics CMOS supportNico Rikken
Adds the CMOS option for Dual Graphics, as is present in more Lenovo models already. Enabling this option ensures that the NVIDIA GPU is powered. More PCI devices can be observed when activating this setting. It was verified on a W520, also by loading a VGA option ROM and achieving a working Dual Graphics system. The CMOS default has been kept to 'Integrated Only', as the usage of Dual Graphics requires an option ROM and drains the battery more quickly. Change-Id: I41ccabd4554ca019684edd6f8b1c23679212c59f Signed-off-by: Nico Rikken <nico@nicorikken.eu> Reviewed-on: https://review.coreboot.org/26114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21soc/intel/{skl,kbl}: ensure C1E is disabled after S3 resumeCole Nelson
C1E is disabled by the kernel driver intel_idle at boot. This does not address the S3 resume case, so we lose state and C1E is enabled after S3 resume. Disable C1E for SKL and KBL. This gives a coherent state before and after S3 resume. TEST='iotools rdmsr cpu 0x1fc'. Returns the same value after boot and S3 resume with bit [1] set to zero (0x20005d). Change-Id: I1343f343bfac9b787f13c15b812c0a201dcccb38 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/27125 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21soc/amd/common: Always set GetBiosCalloutKyösti Mälkki
The entire StdHeader field is really supposed to be forked from a template for each entry into the AGESA API. Current code assumes only Callout would be relevant, which is not quite the case. Change-Id: I0cc66d01d62fa8dc6bb7c9f9fab6fa4753827554 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mediatek/mt8183: Remove DRAM_DMA sectionTristan Shieh
DRAM_DMA section is used for the special SPI NOR controller on legacy SOC. Remove it since no driver need it currently and we don't have the special SPI NOR controller on mt8183. BUG=b:80501386 BRANCH=none TEST=Boots fine on Kukui Change-Id: I6ba0757adbf4f1f8d2688e5ab1a36007e4e0d0fd Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-21mediatek/mt8183: Add watchdog timer supportTristan Shieh
Using common watchdog timer (WDT) code for reset. Set up watchdog timer in mtk_wdt_init() to get reset status and disable auto-reboot. Link common do_hard_reset() to support hard reset. BUG=b:80501386 BRANCH=none TEST=both mtk_wdt_init() and do_hard_reset() work on Kukui. Change-Id: I4be3a133dbb8a64604133cefb0c5f02d01afd0d4 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27026 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mediatek: Move watchdog timer code to a common directoryTristan Shieh
Move watchdog timer (WDT) code which can be reused into a common directory under soc/mediatek. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Icbeb04f775c3c0fdc18dd198df8591f5c4b6ddce Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27025 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mediatek: Share watchdog timer code among similar SOCsTristan Shieh
Refactor watchdog timer (WDT) code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I745c2f204924d9eee1941c0f3e9b6ba45cfb1958 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27024 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable camera power and release resetCaveh Jalali
This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable touchscreenCaveh Jalali
This adds the necessary config to enable touchscreen sensor in linux. BUG=b:110286344,b:110286345 BRANCH=none TEST=verified touch functionality using eval board Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: support i2c-hid trackpadCaveh Jalali
We plan to use i2c-hid compatible trackpads on atlas, so this switches the trackpad config to i2c-hid. BUG=b:80662079 BRANCH=none TEST=used trackpad to verify motion tracking Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27126 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cbSeunghwan Kim
This change defines SAR sensor device into devicetree.cb. Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio. BUG=None BRANCH=poppy TEST=Verified SAR sensor device is loaded by driver in Chrome OS Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27149 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5Seunghwan Kim
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage. BUG=None BRANCH=poppy TEST=Verified the leakage is gone after update coreboot Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKUSeunghwan Kim
For supporting new SKU, we need to override GPIO table and device configuration. The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it. BUG=b:80052672 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27147 Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-20fsp_broadwell_de: Add uncore ASL in common locationDavid Hendricks
This patch adds a file for uncore ASL code that is common among Broadwell-DE mainboards but is currently copy + pasted in each of their dsdt.asl files. This is only for clean-up purposes. It is unclear if the code itself is really necessary, but until we can do further investigation and testing it will be left in. Change-Id: I188e5e46dfa7c2ed3991fb97f2c1b5e062e2212d Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/27155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-20nb/intel/e7505: Leave ROM as un-cacheable in postcarKyösti Mälkki
Collected timestamps indicate LZMA decompression of ramstage is 4x slower when ROM is marked WP-cacheable, in contrast to having ROM as US. A simple copy WP->WB with uncompressed ramstage also appeared to be twice as slow as UC->WB copy. It should be noted that if POSTCAR_STAGE was removed from build, un-lzma takes 130 seconds instead of 45 milliseconds. Change-Id: I2cf995395ef2d303ad0bc044dbfa160990a705d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-20aopen/dxplplusu: Add romstage timestampsKyösti Mälkki
Change-Id: Ic6e2a350a976a3fcb421d47a0bf5600df994edc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-20mb/google/octopus: Configure EC_IN_RW correctlyFurquan Shaikh
This change fixes the following issues with EC_IN_RW signal: 1. EC_IN_RW is an input signal to the SoC. Configure it accordingly in GPIO table for baseboard and bip. 2. GPIO_EC_IN_RW is passed in coreboot tables so that payload can re-sample the GPIO at runtime. BUG=b:110084012 TEST=Verified that EC_IN_RW signal is read correctly in depthcharge. Change-Id: I1c5f5b4b914ced98e89a571dc398df5ba1fe8460 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-06-20mb/google/octopus: Enable Synaptics touchpad devicewuxy
This change adds Synaptics device to phaser project. BUG=b:110236590 TEST=emerge-octopus coreboot chromeos-bootimage reflash the coreboot to DUT,make sure the Synaptics Touchpad can work. Change-Id: Icc1e8c35a9de54ed04187fcf219a72a592d3bd81 Signed-off-by: Xingyu <wuxy@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27159 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19payloads: Add LinuxBoot payload in u-root modePhilipp Deppenwiese
* Add LinuxBoot support * Add u-root mode * Download kernel and u-root from upstream sources. * Add customization options * Clean kernel only if directory exists Change-Id: I3a25ff6812e046acc688cbbb203cf262ad751659 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23071 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-19lib: Add FIT payload supportPatrick Rudolph
* Add support for parsing and booting FIT payloads. * Build fit loader code from depthcharge. * Fix coding style. * Add Kconfig option to add compiletime support for FIT. * Add support for initrd. * Add default compat strings * Apply optional devicetree fixups using dt_apply_fixups Starting at this point the CBFS payload/ can be either SELF or FIT. Tested on Cavium SoC: Parses and loads a Linux kernel 4.16.3. Tested on Cavium SoC: Parses and loads a Linux kernel 4.15.0. Tested on Cavium SoC: Parses and loads a Linux kernel 4.1.52. Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-19Documentation: Add cavium SoC and mainboardPatrick Rudolph
* Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-19lib: Raw import FIT parserPatrick Rudolph
Import from https://chromium.googlesource.com/chromiumos/platform/depthcharge Coding style and coreboot integration will be done in a separate commit. Change-Id: Iee56db328d7eeffb0eaf829841243b0b9195c199 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-19lib/prog_loaders: Move argument selection into selfloadPatrick Rudolph
Set the payload argument in selfload, as other (non self) payloads, are going to set a different argument. Change-Id: I994f604fc4501e0e3b00165819f796b1b8275d8c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25861 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18mb/google/poppy/variants/nautilus: Correct USB OC pin configurationSeunghwan Kim
Due to schematic, we need to correct USB OC pin configuration. - OC0 for Type-C Port 1 - OC1 for Type-C Port 0 - OC2 for Type-A Port - OC3 to NC BUG=NONE BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-18mb/google/octopus: Enable Synaptics touchscreen deviceFurquan Shaikh
This change adds ACPI properties for SYTS7817 device. BUG=b:110013532 Change-Id: Ifdec4efce169c066f212a393df21089d43d8e4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
This creates a fleex variant for octopus. Nothing is set in the variant files here; everything is picked up from baseboard. BUG=b:110085182 TEST=None Change-Id: Ia8b8bb757f67bea997b7f43489c38cac62f7682d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27105 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18cbfstool: Use endian.h and functions from commonlibWerner Zeh
The endian conversion function be32toh() is defined in src/include/endian.h, however this file is not used for cbfstool compilation. Currently the one provided by the host is used and if the host does not provide this endian.h file, the build will fail. However, we do have endian conversion functions in commonlib/endian.h which is available for cbfstool compilation. Switch from be32toh() to read_be32() in order to avoid relying on a host provided include file. We use functions from commonlib/endian.h already in cbfstool. Change-Id: I106274cf9c69e1849f848920d96a61188f895b36 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/27116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-17nb/intel/i440bx: Switch to POSTCAR_STAGEKyösti Mälkki
Boot tested on asus/p2b-ls and p2b-ds. Change-Id: I0154f1d120bef3b45286fb4314f0de419cd8341e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/26821 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17nb/intel/i440bx: Move to RELOCATABLE_RAMSTAGEKyösti Mälkki
Change-Id: I96f42d5dc10d36855bdca64d1406a254250ee5b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26820 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17cpu/intel/car/p3: Use variable MTRR countKyösti Mälkki
Change-Id: I323426e0d9ddee1be72d15702fee4f92c7b348cc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17cpu/intel/slot_1: Switch to different CAR setupKyösti Mälkki
This moves CAR stack under variable MTRRs and removes old CAR code that used complex fixed MTRRs and placed stack in low memory. Change-Id: I75ec842ae3b6771cc3f7ff652adbe386c03b9a5f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/26586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17cpu/intel/car: Remove obsolete filesKyösti Mälkki
These CAR init files are no longer used. The _ht variant will be used as basis for P3 CAR using with variable MTRRs so we only move file. Change-Id: Iace8762c11e2f282df1850f7be170c841d4881f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27084 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17nb/intel/nehalem: Fix DEVEN definesPatrick Rudolph
The DEVEN defines are wrong, but weren't used at all. Fix them as they are needed by the hybrid_graphics_driver and use the defines instead of magic values. Tested on Lenovo T410: The IGD turns on with the correct value. Change-Id: Idf9fc0115de5c72f7d5d88cbb09ae1d2fee0afd0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-17mb/pcengines: Remove unneeded includes and dead codeElyes HAOUAS
Fix coding style. Change-Id: Id13c0ee284293c0c06d46c75c850bc7e81cfc1f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-17nb/intel/x4x: Issue a hard reset with empty MRC cache on warm resetArthur Heymans
The dram controller cannot fully initialize the dram on warm reset (receive enable calibration consistently fails) therefore requiring cached timings. This option is mostly useful when rebooting after having flashed a new rom which overwrites the mrc cache region. Change-Id: I405c0eca076fe081641ede9a670f734c98cbf8fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-15mainboard/google/Kahlee: All variants identify as Grunt in SMBIOSMartin Roth
All Grunt variants should identify as grunt in SMBIOS so that they're recognized correctly as a unibuild Grunt variant. BUG=b:110244268 TEST=Careena identifies as grunt Change-Id: Iaf254149fbec9551d9220018d6d6a0a1be741538 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27117 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15Documentation: Add SandyBridge NRI feature matrixPatrick Rudolph
Change-Id: I69b014430802de132c8d9b6c8409bc762b995468 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27093 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ixHannah Williams
This pin does not have a native function for eSPI. Nonetheless if we use eSPI, it should be configured as a GPIO and kept unconnected to allow S0ix entry. Also removed initialization of LPC pins in mainboard code as they are already initialized in chipset code. The settings fpr LPC pins in chipset code were updated to those that were previously in mainboard code and have been validated on LPC flavor of Geminilake RVP. BUG=b:79251613 BRANCH=none TEST=From kernel prompt in bip, type powerd_dbus_suspend. Check on EC console that SOC enters S0ix. Change-Id: Ie0c1013fee638a3b7a91469736efc0c25a1597fa Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23742 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15util/cbfstool: Support FIT payloadsPatrick Rudolph
In order to support booting a GNU/Linux payload on non x86, the FIT format should be used, as it is the defacto standard on ARM. Due to greater complexity of FIT it is not converted to simple ELF format. Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'. The payload is included as is, with no special header. The code can determine the type at runtime using the CBFS_TYPE field. Support for parsing FIT payloads in coreboot is added in a follow on commit. Compression of FIT payloads is not supported, as the FIT sections might be compressed itself. Starting at this point a CBFS payload/ can be either of type FIT or SELF. Tested on Cavium SoC. Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-15mb/google/poppy/variants/nami: Update DPTF table from version 1.5John Su
Update dptf.asl and TCC parameters from tuning of the thermal team. BUG=b:72974136 TEST=Match the result from DPTF UI Change-Id: Ic0ffc169ad3939cacb46824ed23999c61a23d2c4 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15mainboard/google/kahlee: Enable keyboard backlight for careena specific SKUKevin Chiu
Enable keyboard backlight by Careena SKUID Set to 10% as the same as google/snappy project BUG=b:110065836 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I7d302c4f50528b0e6b7ef4d990f342a69cff34f5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-14cpu/intel/haswell: Use the common intel romstage_main functionArthur Heymans
Tested on Google peppy (Acer C720). Change-Id: I6453c40bf4ebe4695684c1bd3a403d6def82814f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-14nb/intel/fsp_rangeley: Use MSR_PLATFORM_INFO instead of 0xceElyes HAOUAS
Change-Id: Ifb8aa43b6545482bc7fc136a90c4bbaa18d46089 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22957 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14driver/spi/macronix.c: Add MX25L8005Arthur Heymans
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14arch/arm/armv7: Fix coding styleElyes HAOUAS
Change-Id: Ib5d574347373009c8021597f555e6e86c2c0c41f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14cpu/amd: Remove duplicated includesElyes HAOUAS
Change-Id: I3544ce4a573b6996d64b140d8acdaeb3de430896 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-14mb/lenovo/x200: Enable libgfxinitArthur Heymans
Change-Id: I6919845965d90fe8a20a07748ae4804fed0d0cef Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27013 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14nb/intel/x4x: Deprecate native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I4843f52307b87cff6fa6f4d0c74b87428fefa8ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14mb/*/*: Enable libgfxinit on x4x boardsArthur Heymans
TESTED Intel DG41WV with VGA, Intel DG43GT with VGA and HDMI1 and HDMI2. Change-Id: I774b79cc0ef9dc72ccf48901ab94376b27ed9c7a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14nb/intel/x4x: Fix a few things in set_enhanced_modeArthur Heymans
Some things were coding errors, other things need to be fsb specific. Most things here don't seem to matter all that much but better to get it right. Change-Id: I1afa637a16a083c3a945ba3e2a71292b005736fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14nb/intel/x4x: Work around a quirkArthur Heymans
It looks like this hardware has a bug where the display controller does not work properly when dram is clocked 533MHz and the channels are configured in non-stacked mode. The workaround is to select stacked mode in this configuration. Change-Id: I6f37ce15a4e98a4cdbd6d893f22846a65c8be021 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-14nb/intel/x4x: Add the option for stacked channel map settingsArthur Heymans
There seems to be a hardware bug where the combination of non-stacked channel settings, both channels populated and 533MHz dram speed cause the display to be unusable. The code to actually select stacked mode based on hardware configuration will be add in a followup patch. This patch does the following: * Add option to the sysinfo struct for stacked mode * Fix programming channel 1 DRB which needs special care for the last populated rank in stacked mode TESTED on Intel dg41wv (with stacked mode hardcoded and dram at 533MHz) Change-Id: I95965bfea129b37f64163159fefa1c8f16331b62 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I6adc0429ae9ecc8f726d6167a6458d9333dc515f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14stoneyridge: Increase SMM stack size to 2KRaul E Rangel
GSMI Set Event Log is taking more than 1K in stack. This causes the stack to overflow into the adjacent stack. This has the side effect of causing any CPU waiting for the SMI handler to complete to crash when the lock is unlocked because the return pointer has been smashed. BUG=b:80539294 TEST=built on grunt and tested by running `halt` from the OS. Change-Id: Ib170c7d03909ef3d20831726b285178a75007b06 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27033 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14cpu/x86: Make SMM stack size configurableRaul E Rangel
Stoneyridge is running into a stack overflow in the SMM handler. BUG=b:80539294 TEST=built on grunt Change-Id: I94e385497bd93c3638c69fb08d9b843c3bbb55ce Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27034 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_LNick Vaccaro
GPP_E2 will be used as a BT reset line, so configure GPP_E2 as an output and initialize it high (high = out of reset). BUG=b:80089559 BRANCH=none TEST=none Change-Id: If45ef3a592c389a0b80298c59eea849d07d9671e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_B4 for FCAM_PWR_ENNick Vaccaro
FCAM_PWR_EN signal is changing to connect to GPP_B4 instead of GPP_D8 as it needs a 3.3v gpio to provide enough power to also directly power the camera LED. BUG=b:79667559,b:78122599 BRANCH=none TEST=none Change-Id: Ie875ced45dfa2aa7069851004edde8f77329df34 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-14soc/intel/{glk,apl}: ensure C1E is disabled after S3 resumeCole Nelson
C1E is disabled by the kernel driver intel_idle at boot. This does not address the S3 resume case, so we lose state and C1E is enabled after S3 resume. Disable C1E for GLK as it is for APL. This gives a coherent state before and after S3 resume. TEST='iotools rdmsr cpu 0x1fc'. Returns the same value after boot and S3 resume with bit [1] set to zero (0x20005d). Change-Id: I437cbaca75c539c2bc5cd801ab8df907e7447d10 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/27019 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14soc/intel/common: defines constant for C1E enable maskCole Nelson
Register 0x1fc (MSR_POWER_CTL) deserves a proper mask for the C1E enable bit. Define POWER_CTL_C1E_MASK to be used subsequently. Change-Id: I7a5408f6678f56540929b7811764845b6dad1149 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/27035 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14lib/device_tree: Add method to get phandlePatrick Rudolph
Add a method to retrieve a node's phandle. Useful for board specific devicetree manipulations. Change-Id: I966151ad7e82fc678ab4f56cf9b5868ef39398e0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-14util/docker/coreboot.org-status: collect report generatorsPatrick Georgi
Move generators for the board status report and the kconfig options report into a common directory and wrap them in a docker container. Also rework to emit HTML not wiki syntax. Change-Id: If42e1dd312c5fa4e32f519865e3b551bc471bc72 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-14util/lint: Run lint-extended-007-final-newlines checks in parallelMartin Roth
Instead of checking each directory in series, kick off the checks in parallel and then wait for them to finish. Failures print out with file information, so mixing output isn't a problem. This reduces the time it takes to run on lumberingbuilder by 60%. This could probably be sped up even more by splitting up src/mainboard into smaller sections. This method does skip a few control files at the top level - .gitignore, .checkpatch.conf, gnat.adc, etc. These could be added to the list of files to check, but I didn't think it was needed. Change-Id: I171977e713a9956cf4142cfc0a199e10040abb35 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14coreinfo: Skip unpopulated PCI functionsKyösti Mälkki
Per PCI specification, function 0 must be present, so functions 1 to 7 can be skipped in this case. For a device that is not multi-function, it may not decode function number in the hardware at all. To avoid registering such a device eight times, skip scanning functions 1 to 7. Without the latter fix, a single-function PCI bridge may call pci_scan_bus() second time and secondary side devices would get appended second time in the array devices[]. At that point, quicksort() apparently hits an infinite recursion loop. Since pci_scan_bus() is called in part of the early modules->init() sequence early in main(), the errors here left coreinfo payload completely silent when PCI module was built-in on affected system. Terminal screen was cleared, though. Change-Id: Ifc6622f050b98afb7196de0cc3a863c4cdfa6c94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-14AGESA binaryPI: Drop RAMBASE and RAMTOPKyösti Mälkki
With platforms moved to RELOCATABLE_RAMSTAGE, these overrides no longer have a meaning. Overrides existed because AGESA ramstage did not fit within the default 1 MiB of RAMTOP - RAMBASE, when placed low. Change-Id: I0185875dc550de74877c94f36128d5979e5553d6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26813 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14AGESA binaryPI: Drop tests for LATE_CBMEM_INITKyösti Mälkki
Change-Id: I4571e8b560559b3d7afe429eca8caa1512e244a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:10:09 +0000