summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-11soc/qualcomm/ipq40xx: Reduce the delay in I2C.Kan Yan
3ms delay was found in testing to be sufficient for qup_i2c_write_fifo_flush(), but 1 additional ms was added to give additional headroom. Change the Delay from 10ms to 4ms. BUG=b:28942403 TEST=Boot up Gale board and the TPM functions normally. BRANCH=None Change-Id: I6821e2a101cc44e11d74eb6a6215aa9b848ae8c6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d93520fab15c5695ea18db21d0f3b24a108f204d Original-Change-Id: I202f5b8a1ef62bb039c56ba5a25b48b205cf4a67 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/357961 Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: SARAVANAKUMAR SUDALAI <ssudalai@qti.qualcomm.com> Reviewed-on: https://review.coreboot.org/16126 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like SuperSpeed line muxing for rotated cable orientations in the SoC. While fancy, this is very complicated and we don't want to implement support for the whole thing in firmware. The USB Type-C standard has intentionally been designed in a way that the USB 2.0 (HighSpeed) lines always "just work" in any orientation (by just shorting different pins in the connector together) so that simple use cases like ours can get basic USB functionality without much hassle. However, a semi-configured Type-C PHY can confuse USB 3.0 capable devices into thinking we're actually supporting SuperSpeed, and fail at that rather than establishing a reliable HighSpeed connection. This patch sets enough bits in the Type-C PHY to electrically isolate the SuperSpeed lines from the connector so that the connected device isn't going to get any fancy ideas and reliably falls back to USB 2.0. Also clean up the rest of the USB code while we're at it: avoid writing a few bits that are already in the right state from their reset values anyway, or reading values whose content we already know for this SoC. Rename the USB controllers to the name actually used in the Rockchip documentation (USB OTGx) rather than the name blindly copied from Exynos code (USB DRDx). BRANCH=None BUG=chrome-os-partner:54621 TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all orientations, observe how it gets reliably detected now (safe for some known hardware issues on my board). Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366160 Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-by: <515506667@qq.com> Reviewed-on: https://review.coreboot.org/16125 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11arch/riscv: Fix the page table setup codeJonathan Neuschäfer
In particular: - Fix the condition of the loop that fills the mid-level page table - Adhere to the format of sptbr Change-Id: I575093445edfdf5a8f54b0f8622ff0e89f77ccec Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16120 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-11arch/riscv: Update encoding.h and dependent filesJonathan Neuschäfer
I copied it from commit e10d2def7d of spike and made sure the copyright header is still there. Change-Id: Ie8b56cd2f4855b97d36a112a195866f4ff0feec5 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-11lenovo/x60: add info message if dock is presentAlexander Couzens
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16136 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11lenovo/x60: add GPIOs initialisation before dock checkAntonello Dettori
Add GPIOs initialisation before dock check. Needed in order to properly detect the presence or absence of the lenovo dock. Previously the check always reported the dock as connected and currently it always reports it as disconnected since the GPIOs are not properly initialised during the check. Tested and confirmed working. Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16139 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11vendorcode/intel/fsp: Add fsp 2.0 header files for skylake and kabylakeRizwan Qureshi
Add FSP 2.0 header files, these files are common for Skylake and Kabylake, name the folder as skykabylake to signify the same. Change-Id: I71b43a59c9a9b0adf1ee48285e4a72e24a13df2d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16050 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-08-11build system: Print the content of all regions we add files toPatrick Georgi
That's more useful than just COREBOOT for more complex scenarios Change-Id: I93cd686d698799a3331ca2ea487cd6efb304caa0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16143 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11build system: drop -cbfstool-opts variable supportPatrick Georgi
It was a band-aid that isn't required any more. Change-Id: Ib1793ae8fe25eecf9bd5ab8e5feef0d9380b43c2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16142 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11intel/fsp1_1: Use new per-region position overridePatrick Georgi
It cooperates better with the file sorting heuristic. Change-Id: I1c071243720352970dd2c4c2afed12451f91dcaa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16141 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11build system: allow overriding file position and alignment per regionPatrick Georgi
To override fallback/foo's position or alignment in region BAR, use fallback/foo-BAR-{position,align} = 0x1234 Like for the global settings, specifying both isn't allowed because that's rather pointless. Change-Id: I94f41ebc9f35108267265df4164f23b70e3d0bf6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11build system: remove early stage cbfs-file sortingPatrick Georgi
They're now sorted later in the process after the per-region file lists are determined. Change-Id: I0bba381d09dc4b99e2fe5cae16ff7ffcb5b3aa82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16138 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11build system: order per-region files to optimize placement successPatrick Georgi
Make sure that files with a fixed position are placed first (whose order doesn't matter: either they collide or they don't), then all aligned files (where we just hope that the right thing happens) and finally the files with no further requirements (again, hope). It's still a pretty good heuristic given a typical coreboot image. The global sorting that happens earlier in the build flow will be removed in the future to make room for per-region requirements. Change-Id: I269c00b2ece262c95d310b76a6651c9574badb58 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16137 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11intel/amenia: Add MAINBOARD_FAMILY for ameniaBora Guvendik
BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: I66178cc75872f14941434081d9650a569a084d04 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16135 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11intel/amenia: set default value for BOOT_MEDIA_SPI_BUSBora Guvendik
BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: I60d411482812d98cb8dd11d66b0fc96ea9bae895 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16134 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11intel/amenia: Select UART_FOR_CONSOLE for ameniaBora Guvendik
Set default value for UART port BUG=chrome-os-partner:51844 TEST=Boot to chrome and check console Change-Id: I5e76066e0ff531303595dcd5a99f2f8db379e89b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16133 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11intel/amenia: Update flash size to 16MBBora Guvendik
Update flash image size to 16MB and update image layout in flashmap descriptor file. BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: Ibdfb2949d06aedc38ddcef1078c2d14abcfa2dac Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16083 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11soc/intel/common: Add support for serial console based ACPI debugSubrata Banik
This patch enables serial debug functionality for ASL code based on UART type(legacy/LPSS). From Skylake onwards all Intel platform uses LPSS based UART for serial console hence provide option to redirect ASL log over LPSS UART. Example: Name (OBJ, 0x12) APRT (OBJ) APRT ("CORE BOOT") Output: 0x12 CORE BOOT BUG=none BRANCH=none TEST=Built and boot kunimitsu to ensure to be able to get ASL console log. Change-Id: I18c65654b8eb1ac27af1f283d413376fd79d47db Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/16070 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11fsp_Broadwell_DE: Do not set IRQ3 and IRQ4 to levelKevin Paul Herbert
When booting Linux as a coreboot payload, serial access does not work properly. This is because the setup code erroneously sets IRQ3 and IRQ4 to level. The UART on Broadwell is 8250/16550 compatible, thus ISA and edge-triggered. This change is not necessary on the non-FSP version of Broadwell support. The non-FSP version does not set these IRQ overrides. Fix verified booting Linux 4.6.0-rc2 on Intel Camelback Mountain CRB, using Intel FSP 1.0. Change-Id: I17b466676e7f4891c3e75ce6208e1580c9eaf742 Signed-off-by: Kevin Paul Herbert <kevin@trippers.org> Reviewed-on: https://review.coreboot.org/16065 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11buildgcc: printf no-color before quitingZheng Bao
On some kind of terms (shell in emacs), the color-ctrl letters don't work. The backspaces can not delete correct number of letters. So we don't print color-ctrl letters in loop. Change-Id: I1f1729095e8968a9344ed9f1f278f7c78f7110e9 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/16066 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10rockchip/common: Set weekday to unknown in rtc_get()Martin Roth
Prior to this patch, time->wday was not being initialized in rtc_get(), but was still being used by rtc_display() to print a day. Set to -1 which gets printed as "unknown ". Fixes coverity issue 1357459 - Uninitialized scalar variable Change-Id: Idecb7968f854df997b58a342e1a06a879f299394 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15899 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-08-10soc/intel/quark: Switch to using serial routines for FSPLee Leahy
Switch from passing FSP the serial port address to passing FSP the serial port output routine. This enables coreboot to use any UART in the system and also log the FSP output. TEST=Build and run on Galileo Gen2 Change-Id: I67d820ea0360a3188480455dd2595be7f2debd5c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16105 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10drivers/intel/fsp2_0: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: If7bfcea1af82209dcdc5a9f9f2d9334842c1595e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10drivers/intel/fsp1_1: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: Ib01aef448798e47ac613b38eb20bf25537b9221f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16128 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10console: Add write line routineLee Leahy
Add write line routine which is called indirectly by FSP. TEST=Build and run on Galileo Gen2. Change-Id: Idefb6e9ebe5a2b614055dabddc1882bfa3bba673 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16127 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10build system: change addition order of files to go by regionPatrick Georgi
Instead of adding each file in all requested regions, sort by region, then by file. This is in preparation of per-region file options (eg. position, alignment) Change-Id: Ide09a1c8840279380294a059bbd5d2f9f0cba780 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16130 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10util/cbfstool: Initialize elf_writer pointer to avoid crashJonathan Neuschäfer
If some error happens in cbfs_payload_make_elf, the code jumps to "out", and elf_writer_destroy(ew) is called. This may happen before an elf writer is allocated. To avoid accessing an uninitialized pointer, initialize ew to NULL; elf_writer_destroy will perform no action in this case. Change-Id: I5f1f9c4d37f2bdeaaeeca7a15720c7b4c963d953 Reported-By: Coverity Scan (1361475) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16124 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR)Martin Roth
The variable MAINBOARD_DIR already has the quotes stripped off. Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/16117 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10Makefile.inc: Strip CONFIG_DEVICETREE quotes at top of makefileMartin Roth
Minor change - Instead of stripping the quotes from CONFIG_DEVICETREE inline, add it to the location where we normalize all the other Kconfig variables. Change-Id: Idbc58179c7b45160afef7d7e44f9b3b334f8c4a7 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/16116 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-10google/reef: Add mainboard handler function for gpio SMIShaunak Saha
This patch adds mainboard_smi_gpi_handler which handles the SMI event. This can happen in situations like lidclose and system goes to shutdown. BUG=chrome-os-partner:54977 TEST=When system is in firmware mode executing the command lidclose from ec console shuts down the system. Change-Id: I8ff6001e48dcbbd4cee5097e759352d8fea6189b Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15834 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10soc/apollolake: add GPIO SMI supportShaunak Saha
GPIOs which trigger SMIs set the GPIO_SMI_STS status bits in SMI_STS register. This patch also sets the SMI_EN bit in enable register for each community based on GPIOROUTSMI bit in gpio pad. When SMI on a gpio happens status needs to be gathered on gpio number which is done by reading the GPI_SMI_STS and GPI_SMI_EN registers. BUG=chrome-os-partner:54977 TEST=When system is in firmware mode executing the command lidclose from ec console shuts down the system. Change-Id: Id89a526106d1989c2bd3416ab81913e6cf743d17 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15833 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-10elog: Ensure eventlog will always get initialized when configured inJulius Werner
Commit 0d9cd92e (chromeos: Clean up elog handling) removed the individual elog_init() calls from mainboards that did them and automated adding certain events through the boot state machine. Unfortunately, the new code would sometimes not log any specific event at all, and thereby also never call elog_init() (through elog_add_event()) which adds the "System boot" event. We can assume that any board that configures the eventlog at all actually wants to use it, so let's just add another call to elog_init() to the boot state machine so we can ensure it gets called at least once. BRANCH=None BUG=chrome-os-partner:56001 TEST=Booted Kevin, confirmed that eventlog code runs again. Change-Id: Ibe7bfc94b3e3d11ba881399a39f9915991c89d8c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16118 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-09drivers/elog: provide return status for all operationsAaron Durbin
Instead of relying on global state to determine if an error occurred provide the ability to know if an add or shrink operation is successful. Now the call chains report the error back up the stack and out to the callers. BUG=chrome-os-partner:55932 Change-Id: Id4ed4d93e331f1bf16e038df69ef067446d00102 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16104 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: clean up SMBIOS related codeAaron Durbin
Don't conditionally compile parts of the code. The unused pieces get culled by the linker, and the #if's just clutter things up. BUG=chrome-os-partner:55932 Change-Id: Ic18b2deb0cfef7167c05f0a641eae2f4cdc848ee Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: consolidate checks in elog_find_flash()Aaron Durbin
There were checks against global variables trying to determine failing cases of elog_find_flash(). Instead move the checks into elog_find_flash() and return value indicating failure. A minimum 4KiB check was added to ensure the eventlog is at least that size which makes the heuristic checks cleaner. BUG=chrome-os-partner:55932 Change-Id: I4d9d13148555e05d4f217a10f995831a0e437fc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16101 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09google/gru: Fix rk3399-gru write protectDouglas Anderson
The write protect GPIO is active high, not active low. After fixing I can see this after removing the write-protect screw: $ crossystem | grep wpsw_boot wpsw_boot = 0 Putting the screw in shows: $ crossystem | grep wpsw_boot wpsw_boot = 1 Caution: this CL contains explicit material. It explicitly sets the pullup on the WP GPIO even though that's the boot default. BRANCH=None BUG=chrome-os-partner:55933 TEST=See desc. Change-Id: I23e17e3bbbe7dcd83e81814de46117491e61baaa Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e6969f4be42c00c6e88bbb14929cf0454462ad21 Original-Change-Id: Ie65db9cf182b0a0a05ae412f86904df6b239e0f4 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366131 Original-Tested-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16115 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: remove unnecessary global stateAaron Durbin
There were 3 variables indicating the state of the event log region. However, there's no need to keep track of those individually. The only thing required is to know is if elog_scan_flash() failed. There's no other tracking required beyond that. BUG=chrome-os-partner:55932 Change-Id: I88ad32091d3c37966a2ac6272f8ad95bcc8c4270 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16100 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09drivers/elog: sync events to non-volatile storage lastAaron Durbin
There were multiple paths where writes and erases of the flash were being done. Instead provide a single place for synchronizing the non-volatile storage from the mirrored event log. This synchronization point resides as the very last thing done when adding an event to the log. The shrinking check happens before committing the event to non-volatile storage so there's no need to attempt a shrink in elog_init() because any previous events committed already honored the full threshold. BUG=chrome-os-partner:55932 Change-Id: Iaec9480eb3116fdc2f823c25d028a4cfb65a6eaf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16099 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09flashmap: Allocate at least one entry in kv_pair_new()Stefan Reinauer
Change-Id: I971fa85ed977884d050790560a5a8f2ce955eb7c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14444 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09payloads: add Kconfig option for bayouAntonello Dettori
Add an option to add bayou as the primary payload. Change-Id: I8c0164344537b82870198b13ef6fdf20e7d095ef Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15954 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09gigbyte/ga-g41m-es2l: add cmos.layout and cmos.defaultArthur Heymans
This adds a cmos.layout and a cmos.default to ga-g41m-es2l. This allows to set things like baud_rate, debug_level, etc. from cmos. Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09x4x: make preallocated IGD memory a cmos optionArthur Heymans
This allows to set the preallocated memory for the IGD on x4x using a cmos option. If no cmos option is found a default value of 64M is used. TESTED most options on ga-g41m-es2l with 2G dimm in one slot and 2x2G. 352M also works in contrast with gm45 where it is known to cause issues with certain ram combinations. Change-Id: I9051d080be82f6dfab37d353252e29b2ed1fca7f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15492 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09x4x: add non documented vram sizesArthur Heymans
The Intel documtentation, "Intel ® 4 Series Chipset Family" mentions the possibility of 1, 4, 8 and 16M of preallocated memory for the IGD, but does not document this. This allows to set those undocumented values. TESTED on ga-g41m-es2l with 2G dimm in one slot and 2x2G. Change-Id: I92beb8d78907d4514a5aaf69248dd607dcf227c0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09vendorcode/amd: Remove dead codePatrick Georgi
Change-Id: I6b21822d60d379cb8cd21b69c714a437bb7977ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1254643 and others Reviewed-on: https://review.coreboot.org/16112 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-09superio/*: Relocate Kconfig to chip folder.Omar Pakker
This moves the Kconfig from the Super I/O manufacturer folder to the chip folder instead. This makes new chip commits self-contained unit as edits to the central Kconfig file are no longer required. Change-Id: I7aee07919f2ae9204850c669e0ed3cb17d4de8cd Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15973 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-08-09buildgcc: Use upstream patch for aarch64 build issuePaul Kocialkowski
Upstream proposed and merged a patch fixing the ARM Trusted Firmware build issue that occurs with recent version sof binutils. This includes this patch instead of the previous one. See binutils commit 7ea12e5c3ad54da440c08f32da09534e63e515ca: "Fix the generation of alignment frags in code sections for AArch64." The issue was reported at: https://sourceware.org/bugzilla/show_bug.cgi?id=20364 Change-Id: I16a8043d3562107b8e84e93d3f3d768d26dac7e4 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/16110 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09build system: drop commented out codePatrick Georgi
Change-Id: I7f36a317f0a7cf4634246a255be79e6bcb2b2442 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/16067 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-09soc/intel/quark: Remove TODO message from FspUpdVpd.hLee Leahy
Remove the TODO message from FspUpdVpd.h TEST=Build and run on Galileo Gen2 Change-Id: Icd565c6062ef59b1e4a68310bb6f9ed62fb014af Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16114 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-08-09soc/nvidia/tegra210: remove unused spi boot device supportAaron Durbin
All mainboards utilizing the t210 SoC use the CBFS spi wrapper for the boot device support. Therefore, remove the unutilized spi boot device. BUG=chrome-os-partner:55932 Change-Id: Id49ca6e5bf353bba8c03e62f5a9a873ad1ce7081 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16109 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09soc/nvidia/tegra132: remove tegra132 supportAaron Durbin
As no more mainboards are utilizing this SoC support code remove it. It can be resurrected if ever needed. BUG=chrome-os-partner:55932 Change-Id: Ic3caf6e6c9b62d012679b996abaa525c8bf679a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16108 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09mainboard/google/rush_ryu: remove rush_ryu mainboardAaron Durbin
The rush_ryu board was a development platform that never made it into a product. Remove it as it's not available to anyone. BUG=chrome-os-partner:55932 Change-Id: Ia3836ff8cade3009730543177a66736ae197572b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16107 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09mainboard/google/rush: remove rush mainboardAaron Durbin
The rush board was a development platform that never made it into a product. Remove it as it's not available to anyone. BUG=chrome-os-partner:55932 Change-Id: I0f77bb791491509da7bd9cf25050e01c2f734a2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16106 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09google/gru: Update board/RAM ID ADC valuesJulius Werner
Looks like our hardware guys have decided to change some voltage ranges in the Gru/Kevin ADC IDs since we last wrote a table. This patch updates it to the latest values from the Spreadsheet of Truth. Also adds further values up to rev15. BRANCH=none BUG=none TEST=none Change-Id: I1aa093ca3abe952afd658eb7da01b325f798eaa0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e42b4685c91f01ce1cff61638b17042be9d575fd Original-Change-Id: I646fd03dc385df1a8f0af8cb85ff3128cc31f8d8 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/365111 Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16053 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09rockchip/rk3399: sdram: correct read obs and set DQS driver registerLin Huang
We were using the wrong register when reading the obs value and setting the DQS driver. This did not affect LPDDR3 performance, but still needs to be fixed. BUG=none BRANCH=none TEST=boot from kevin Change-Id: I144f575e27fba11872a8c5463ab1e2986f385ede Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 98221e6b03fc09cbf62af29a270e7a8aa8dfb986 Original-Change-Id: Ie179f9a2955c5712951d40b3ada9c14a51c09c8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/363170 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16052 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09soc/qualcomm/ipq40xx: Use block mode for I2CVaradarajan Narayanan
In FIFO mode, the I2C driver was not able to fetch more than 32 bytes of data from the TPM device. Switch to block mode to be able to read more data. BUG=chrome-os-partner:51096 TEST=TPM commands succeed BRANCH=None Change-Id: Ib52a1b03667f61a08ce048d38407a5b60abf660d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: fbcd40dc67d796d3e31675bd35321282667fe9fa Original-Change-Id: I765b76f9d7743f6d387470de594fb6eee99e08ca Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357960 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16051 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: treat offsets relative to start of mirrorAaron Durbin
Instead of treating offsets relative to after the header make the offsets relative to the in-memory mirror buffer. This simplifies the logic in that all offsets are treated the same. It also allows one to remove a global variable. BUG=chrome-os-partner:55932 Change-Id: I42491e05755d414562b02b6f9ae47f5c357d2f8a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16098 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08drivers/elog: use region_device for mirroring into ramAaron Durbin
A region_device can be used to represent the in-memory mirror of the event log. The region_device infrastructure has builtin bounds checking so there's no need to duplicate that. In addition, it allows for removing much of the math juggling for the buffer size, etc. BUG=chrome-os-partner:55932 Change-Id: Ic7fe9466019640b449257c5905ed919ac522bb58 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16097 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: use offsets for checking cleared buffersAaron Durbin
There's only 2 users of checking if the event buffer is cleared to the EOL value. Each were passing pointers of the in-memory mirror while also doing calculations for the size to check. Since the in-memory mirror is one big buffer the only thing required to know is the offset to start checking from. The check is always done through the end of the buffer. BUG=chrome-os-partner:55932 Change-Id: Icd4a7edc74407d6578fc93e9eb533abd3aa17277 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16096 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08sconfig: Reformat C codeMartin Roth
Change-Id: Idfd1bd8240413026b992ae1382a57bccf9d8ddb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16082 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08sconfig: Remove mainboard chip.h supportMartin Roth
The mainboard chip.h files were (mostly) removed long ago. Change-Id: I1d5a9381945427c96868fa17756e6ecabb1048b2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16080 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08sconfig: Remove bootblock and Kconfig modesMartin Roth
The command line parameters for these modes haven't worked in two years and nobody noticed. They're obviously not getting used, so remove them. TEST=Generate static.c before and after the change, verify they're identical. Change-Id: I1d746fb53a2f232155f663f4debc447d53d4cf6b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08sconfig: Update command line parametersMartin Roth
Instead of having directories and file names hardcoded, pass in the full path and filename of both the input and output files. In the makefile, create variables for these values, and use them in places that previously had the names and paths written out. Change-Id: Icb6f536547ce3193980ec5d60c786a29755c2813 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08sconfig: pass in devicetree filenameMartin Roth
Instead of forcing the hardcoded 'devicetree.cb' filename under the mainboard directory, this allows mainboards to select a filename for the devicetree file. This allows mainboard variants that need to use different devicetree files to live under the same directory. Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12529 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08drivers/elog: perform writes in terms of offsetsAaron Durbin
Instead of taking pointers and back-calculating the proper offset perform writes in terms of the offsets within the elog region in flash. BUG=chrome-os-partner:55932 Change-Id: I5fd65423f5a6e03825c788bc36417f509b58f64d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16095 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-08-08libpayload: lzma: Allocate scratchpad on the heapJulius Werner
Allocating a 15980-byte scratchpad on the stack when your default stack size is set to 16KB is really not a great idea. We're regularly overflowing into the end of our heap when using LZMA in libpayload, and just happen not to notice it because the heap rarely gets filled up all the way. Of course, since we always *have* a heap in libpayload, the much saner solution is to just use it directly to allocate the scratchpad rather than accidentally grow backwards into it anyway. Change-Id: Ibe4f02057a32bd156a126302178fa6fcab637d2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16089 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08supermicro/h8scm: Remove last unused chip.h fileMartin Roth
Change-Id: I84d61c8ade6e42e314a31e1155b4d5628b16199a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16081 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-08drivers/elog: remove parameters from elog_flash_erase()Aaron Durbin
The elog_flash_erase() was only called to erase the entire elog region in flash. Therefore, drop the parameters and perform the full erase. BUG=chrome-os-partner:55932 Change-Id: I6590347ae60d407bc0df141e9196eb70532f8585 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16094 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: remove unnecessary check in elog_shrink()Aaron Durbin
There was a check against the next event offset against the shrink size in elog_shrink(). However, all calls to elog_shrink() were conditionalized on the next event offset exceeding the full threshold. The shrink size is set to the minimum of the full threshold and a percentage of the elog region size. Therefore, it's impossible for the next event offset to be less than the shrink size because full threshold is always greater than or equal to the shrink size. BUG=chrome-os-partner:55932 Change-Id: Ie6ff106f1c53c15aa36a82223a235a7ac97fd8c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16093 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: use event region size when adding a clear eventAaron Durbin
For the elog shrink case we log the number of bytes shrunk from the event log. However, when clearing the log the size recorded was the entire region size including the header as well as the event region space. To be more consistent mark the clearing event with the number of bytes actually cleared out (excluding the header size). BUG=chrome-os-partner:55932 Change-Id: I7c33da97bd29a90bfe975b1c6f148f181016f13f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16092 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: remove unused functionAaron Durbin
get_rom_size() is no longer used. Remove it. BUG=chrome-os-partner:55932 Change-Id: Id9fa8f67b67ee355243a5c763cfafa0ce76e9b2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16088 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08soc/intel/common: fix gsmi handlerAaron Durbin
The gsmi_exec() expects the parameter to be a pointer to the 32-bit register storage of the SMI save state. The previous code was passing a pointer with the value obtained from the saved-state -- not a pointer to the storage of the register value. This bug causes gsmi to not log events because it's interrogating the parameter buffer itself as if it were a pointer. BUG=chrome-os-partner:55932 Change-Id: I37981424f1414edad1456b31cad1b99020d57db6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16087 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08vendorcode/google/chromeos: remove unnecessary includes in elog.cAaron Durbin
The elog.c file had stale includes no longer needed. Remove them. BUG=chrome-os-partner:55932 Change-Id: I891a57d08281c3c56e9d35489d6dea6c47eaa27b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16085 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08commonlib/region: make buffer argument const for writeatAaron Durbin
The buffer for writeat() should be marked as const as the contents won't be manipulated within the call. BUG=chrome-os-partner:55932 Change-Id: I968570c1cf80f918a07b97af625a56f11b5889c1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16084 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08soc/intel/skylake: Clean up SoC ASL code.Barnali Sarkar
List of changes done here in this patch 1. Remove CARD definition from EMMC and SD Card Controller in scs.asl since _RMV method does not get evaluated while setting up removable attribute in sysfs in kernel. "cat /sys/block/mmcblk1/removable" this command always returns 0. This CARD Device includes _ADR which follows SDIO Bus format. But, SD/EMMC sits on PCI Bus. Hence this CARD Device specific _ADR code is also not needed. 2. Remove Base Address for ACPI debug output memory buffer in systemagent.asl as it is not getting used throughout the code. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: I29effaffdafcc21e26445ec3c54aedecdbc50274 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16068 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08soc/intel/skylake: Cleanup patch for Skylake SoCBarnali Sarkar
Here is the list of items of code cleanup 1. Define TCO registers in smbus.h and not in pmc.h (as per EDS). 2. Include smbus.h wherever these TCO register defines were used. 3. Remove duplication of define in gpio_defs.h. 4. Remove unnecessary console.h include from memmap.h as no prints done. 5. Remove unnecessary comment from pch.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu. Change-Id: Ibe6d2537ddde3c1c7f8ea5ada1bfaa9be79c0e3b Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16027 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08google/reef: Configure SDIO D1 to enable SCS Power GatingJagadish Krishnamoorthy
SDIO D1 pin needs to be configured as Native mode to enable SCS Power Gating. BUG=chrome-os-partner:54251 TEST=Verify SCS Power Gating Change-Id: Ic33b26443203217678e11d195eb965a7e628ad82 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/16062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08google/chromeec: Enable/Disable ccache with config variableMartin Roth
If the CONFIG_CCACHE variable is NOT set, define the CCACHE variable as blank on the Chrome EC make command line. This will overrride and disable the CCACHE variable in the Chrome EC makefile. Change-Id: Idb1da06941084cea104d77748820971edf151f7b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16035 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08libpayload: arm64: Fix MMU range overlap checkJulius Werner
The ARM64 MMU code maintains a list of used ranges, to avoid mapping the DMA buffer over the coreboot tables and things like that. Unfortunately, the overlap with ranges in that list is checked with (start1 >= start2 && start1 <= end2) || (end1 >= start2 && end1 <= end2) which is not a full overlap check and misses the case where the second region is completely contained within the first. This patch replaces that code with a properly vetted primitive from Stack Overflow. BRANCH=none BUG=chrome-os-partner:54416 TEST=Observe how Kevin recovery screen now gets drawn at 10x the speed. Change-Id: I7e2706426762794e160d743bbfc40da1e26eee12 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16075 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08vendorcode/amd/pi/Lib: Fix reporting fatal errorPatrick Georgi
Instead of writing the first word of 6 "post code structs" where only one exists (leading to 0xDEAD and 5 garbage words), write the correct set. Change-Id: Ifdfa53a970dda33dc9dc8c05788875077c001ecf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1361054, #1361055, #1361056 Reviewed-on: https://review.coreboot.org/16058 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-08cbfstool/cbfs_image: Fix resource leak for tbuffFurquan Shaikh
Change-Id: I1f4626e1bda92af38e7967d7e05a4c7143942cf6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16074 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08cbfstool/cbfs_image: Check for return value of buffer_createFurquan Shaikh
Free any buffers if required. Change-Id: Iccd435dba51275d875a5fdb5649cdcd0541fd84c Signed-off-by: Furquan Shaikh <furquan@google.com> Found-by: Coverity Scan # 1361254 Reviewed-on: https://review.coreboot.org/16073 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08cbfstool/cbfs_image: Fix resource leak for segsFurquan Shaikh
Free segs whenever returning from cbfs_payload_make_elf() Change-Id: I0dd722dd488723cecffe1f5621244bb0344056a6 Signed-off-by: Furquan Shaikh <furquan@google.com> Found-by: Coverity Scan # 1361268 Reviewed-on: https://review.coreboot.org/16072 Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08cbfstool/elfheaders: Make elf_writer_destroy NULL-safeFurquan Shaikh
This relieves caller from having to check if the parameter being passed in is NULL. Change-Id: I3ea935c12d46c6fb5534e0f2077232b9e25240f1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-08cbfstool/cbfs_image: Initialze empty_sz to 0Furquan Shaikh
Change-Id: I8b9cfe56b5893ba11047fcc1a6727e7e12a15772 Signed-off-by: Furquan Shaikh <furquan@google.com> Found-by: Coverity Scan # 1361276 Reviewed-on: https://review.coreboot.org/16071 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-08Use VBOOT_SOURCE instead of hardcoding vboot pathPaul Kocialkowski
This replaces all occurrences of a hardcoded vboot path to the VBOOT_SOURCE variable, that may be overridden from the command line, witch fallback to the source from 3rdparty. Change-Id: Ia57d498d38719cc71e17060b76b0162c4ab363ed Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-08-06soc/intel/skylake: Add Kabylake device IdsRizwan Qureshi
Adding kabylake device ids for chip inits. Skylake and Kabylak do not differ much, the intention is to support both SoCs in the same code base. Change-Id: I9ff4c6ca08fe681798001ce81cca2c085ce32325 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16049 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-06google/reef: Enable I2C2 for use in bootblockDuncan Laurie
Enable I2C bus 2 for early init so it can be used by vboot for TPM communication for verifying the memory init code. BUG=chrome-os-partner:53336 BRANCH=none TEST=build and boot on reef Change-Id: Id4940ab01d8ccf288ab0a7a9a2f19867ed464e8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16059 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-06acpi: Generate object for coreboot table regionDuncan Laurie
Generate an object to describe the coreboot table region in ACPI with the HID "CORE0000" so it can be used by kernel drivers. To keep track of the "CORE" HID usage add them to an enum and add a function to generate the HID in AML: Name (_HID, "CORExxxx") BUG=chromium:589817 BRANCH=none TEST=build and boot on chell, dump SSDT to verify contents: Device (CTBL) { Name (_HID, "CORE0000") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { Memory32Fixed (ReadOnly, 0x7AB84000, // Address Base 0x00008000, // Address Length ) }) } Change-Id: I2c681c1fee02d52b8df2e72f6f6f0b76fa9592fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16056 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-06drivers/intel/fsp1_1: only set a base address for FSP in COREBOOT CBFSAaron Durbin
The -b FSP_LOC argument to cbfstool is only valid for the COREBOOT CBFS. Don't pass that value for all other CBFS regions. Change-Id: Ib5321e7a7dbee8d26eb558933c8ce3fea50b11fe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-05drivers/intel/fsp2_0: Ensure EC is in right mode before memory initFurquan Shaikh
If EC_GOOGLE_CHROMEEC is enabled, ensure that the EC is in correct mode before running memory init. This saves additional memory training required in recovery path because of reboot later in ramstage. BUG=chrome-os-partner:54245 Change-Id: Ic71c054afdcd0001cea95563fe513783b56f3e60 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16034 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05google/reef: Correct SD card pins configChiranjeevi Rapolu
SD CLK and CLK_FB needs to be pulled down by 20K. SD CD_N is active LOW, needs to be pulled up by 20K SD WP pin is not connected for uSD cards, enable writes by default by pulling low by 20K. BUG=chrome-os-partner:54866 BRANCH=None TEST=Test with uSD cards. Change-Id: Ia4bbd966ffb21e276dfc31a74f4ea54718900d66 Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-on: https://review.coreboot.org/16057 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05soc/intel/quark: Add missing breaksLee Leahy
Add missing breaks in reg_access.c. TEST=Build and run on Galileo Gen2 Found-by: Converity Scan #1361261 Change-Id: I8be57f0758e5918a605e20ab9002747e0cc958e0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16069 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-08-05build system: add easier targetting of cbfstool options per regionAaron Durbin
The first attempt of providing a options-for-region function to call to determining a file's cbfstool options would work, but it means there can only be one instance which has to handle all of the files that may need an override. That logic can be problematic in impelementation. Instead, provide a mechanism to target cbfstool options for a given CBFS region where the implementation is tightly coupled in the build system to where the file as requested to be added to cbfs. This allows there to be a base set of cbfstool options while more easily extending arguments on specific regions. Example which adds '-b 0x10000' only for the COREBOOT CBFS region: cbfs-files-y += file.bin file.bin-COREBOOT-cbfstool-opts := -b 0x10000 Change-Id: Idfafb0205be42768adb04bb0a30fe46a9ca1bd57 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14640 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-05drivers/spi: Add support for Micron N25Q128AWerner Zeh
Although we have already support for the flash chip N25Q128 there is a similar type available which has the same geometry and opcodes but unfortunately a slightly different device type ID. While the already supported N25Q128 has the ID 0xbb18 this one has the ID 0xba18. To make both types available in the flash support table, use N25Q128A as the flash name. This name can be found in the datasheet which can be found here: https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf TEST=Booted and verified that MRC cache could be written Change-Id: I02a47692efb23a9a06a289c367488abd256b8e0c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16061 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-05drivers/intel/fsp2_0: Add checklist supportLee Leahy
Add the Kconfig value to point to the checklist data files. TEST=Build and run on Galileo Gen2 Change-Id: I3737b46162214fad139382193de944ec5d175645 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16039 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add bootblock_c_entryLee Leahy
Add the bootblock_c_entry routine to make it more explicit where the code transitions from assembler to C. TEST=Build and run on Galileo Gen2 Change-Id: Ib5f580c30b58d3c82fedddf63c368e617d401515 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16064 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Clean up debug output levelsLee Leahy
Change the debug output levels for quark: * Remove excess debug output * Change BIOS_DEBUG to BIOS_SPEW - exception in report_platform.c TEST=Build and run on Galileo Gen2 Change-Id: I37d7ed21a7fc4c92efeb5b71dd01922d7d4b9192 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-05soc/intel/quark: Disable FSP serial outputLee Leahy
Disable FSP output when CONFIG_DEFAULT_CONSOLE_LOGLEVEL is not set to 8 (BIOS_SPEW). Use the console log level to choose between the serial port address and NULL and pass it to FSP for the serial port address. TEST=Build and run on Galileo Gen2. Change-Id: I5498aad218524c211082d85d0ae9aacaf08a80f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16005 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>