| Age | Commit message (Collapse) | Author |
|---|
|
Work on this mainboard was abandoned and never finished. It's not really
usable in its current state, so let's get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I4cd2e2cd0ee69d9846472653a942fa074e2b924d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Selecting USE_CAR_NEM_ENHANCED_V1 as of now. This selection in Kconfig
programs IA32_L3_MASK_1 (0xc91) & IA32_L3_MASK_2 (0xc92). These will
select ways for eviction & non-eviction. TGL will have to switch back
to USE_CAR_NEM_ENHANCED_V2 once the IA32_L3_SF_MASK_1 (0x1891) &
IA32_L3_SF_MASK_2 (0x1892) programming requirements are understood.
Bug=b:171601324
BRANCH=volteer
Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache.
Change-Id: Ifc77856e26ab26f9fbb2693f70c751f43337421b
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change switches the selection of CAR mode so that
INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard
selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by
mainboards using older silicon (ES1 or ES2) that did not
support NEM enhanced mode.
This enables NEM Enhanced Mode for TGL-U/Y RVPs.
Bug=b:171601324
BRANCH=volteer
Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache.
Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Due to the phony dependency to check for openssl, vboot-futility
was always rebuilt, and because it was newer than coreboot-futility,
it was always copied over.
Do that in parallel often enough and you run into race conditions,
as we did on our builders. Mark check-openssl-presence as order-only
dependency so that it's executed (and can bail out) but doesn't force
regeneration of vboot-futility.
Change-Id: Ib7fb798096d423d6b6cba5d199e12fe5917c3b41
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing special function gpio pad groups for CNL-LP.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I0509552da6ffad395c2b89df1676e1903c783695
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing special function gpio pad groups for CNL-H.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ib83aeef9f4b6aa174e61ccbd87fb7b6450ed773b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing native functions for special gpio pads for CNL-H,
which are documented in the PCH EDS and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I71339d66362d29806c91375c214e9fb84c989201
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ifd6cabb646000c8dff695c5c4f7196b2779f1430
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the missing native functions for special gpio pads for CNL-LP,
which are documented in the PCH EDS and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Iedb726aa3afdbbbedafb67f6b7668bf591c2b9b4
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I86c7159d9f48560c41efdfe49f162aef00499d13
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I2953729c69dfcfa8b34192b3e1623fdfad87ca3a
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45118
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce the `sir_unset_and_set_mask` helper and update the one PCI
read-modify-write operation that is somehow not reproducible.
Change-Id: I30ad6ef8ad97ee0a8dc2297fba5bbbfe24f00f1c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Commit 8084b38568 (sb/intel/lynxpoint/sata: Always use AHCI mode)
dropped the devtree option, but missed this recently-added mainboard.
Change-Id: I6ab3a763c0bcd7431193c48e473639589b1a1e1a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The other two modes are not used by any mainboard, and the code seems to
be copied from older southbridges. As the code looks incorrect, drop it.
Change-Id: I374546279a85cead1aea13e0952bbfd6f643a75b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The Asus F2A85-M, F2A85-M LE and F2A85-M PRO all have a Super I/O, and
therefore have legacy devices like a serial console.
Selecting `HUDSON_LEGACY_FREE` currently disable the serial console
during bootup in romstage, which is undesired.
So, deselect the symbol by default.
TEST=Boot Asus F2A85-M PRO and verify serial console is *not* disabled
during romstage.
Change-Id: Ia6588c0d4b2c24c7cb9da04805d13274c8ae295e
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47363
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to check for the Power Management (PM) Status bit for
various internal devices like USB, CNVi etc. and log them into the event
log for debugging purposes.
BUG=b:172279037
BRANCH=volteer
Change-Id: Ib3d0bf33d780444f8240f749a3319212c985950d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add support to check for the Power Management (PM) Status bit for
various internal devices like USB, CNVi etc. and log them into the event
log for debugging purposes.
BUG=b:172279037
TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is
logged into the event log for one of the internal devices eg. USB
bluetooth.
8 | 2020-11-05 15:04:16 | S0ix Enter
9 | 2020-11-05 15:04:29 | S0ix Exit
10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8
11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109
12 | 2020-11-05 15:05:08 | S0ix Enter
13 | 2020-11-05 15:05:14 | S0ix Exit
14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8
15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109
Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I796e660eebc4d2c3c32207bd3a6ee44aaffeb325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
It is too easy to confuse those with IA32_SMRR_PHYS_x registers.
Change-Id: Ice02ab6c0315a2be14ef110ede506262e3c0a4d5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46896
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Actual support CBnT will be added later on.
Change-Id: Icc35c5e6c74d002efee43cc05ecc8023e00631e0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the shuboz variant of the zork reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:172021093
BRANCH=none
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I3f62625f8cbde1c9adf8ab335edeb9e811e32679
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47152
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code is based on autoport, with necessary modifications.
This laptop uses SMSC MEC1322 embedded controller, but the EC
interface is the same as the EliteBook laptops of previous generations
that use KBC1126 EC. So it still uses ec/hp/kbc1126, but does not need
EC firmware inserted into CBFS. We also need to leave the end of the
OEM flash content untouched, so the default ROM size is set to 12MiB
instead of 16MiB, and we need to modify the IFD when flashing.
Thanks to persmule for providing the laptop and pointing out how to
program the system flash chip of it.
Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CB:46865 ("mb, soc/intel: Reorganize CNVi device entries in
devicetree") reorganized the devicetree entries to make the
representation of CNVi device consistent with other internal PCI
devices. Since a dummy generic device is added for the CNVi device,
`emit_sar_acpi_structures()` needs to first check if the device is PCI
before checking the vendor ID. This ensures that SAR table generation
is skipped only for PCIe devices with non-Intel vendor IDs and not for
the dummy generic device.
BUG=b:165105210
Change-Id: I3c8d18538b94ed1072cfcc108552f3a1ac320395
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Adds ACPI properties for WDT8762A device.
Per spec v0.8
HID name WDHT2002
T14=100ms
BUG=b:163561649
BRANCH=puff
TEST=emerge-puff coreboot and check system dmesg and evtest can get device.
Change-Id: I178e9d5aa1e1501d33b3cd4092f3f522bb6f1a74
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Hook up PCH thermal subsystem configuration to devicetree.
Change-Id: I84bac2cec079370370ecf1e5e4742e6704921d40
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: Id198afdaa13b4c361e1b77a56d5a2436ed1c4c86
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45577
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0c606fd129c200446744f7a67ae63fec6d8e1684
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Calculate the frequencies based on the appropriate MSRs and pass them to
SMBIOS tables generator. Ivybridge microarchitecture does not yet
implement CPUID 16H leaf used to obtain the required frequencies.
TEST=Intel Core i7-3770, TianoCore UEFI payload displays the CPU
frequency correctly equal 3.4GHz in Boot Manager Menu, dmidecode shows
correct frequencies according to Intel ARK, 3.4GHz base and 3.9GHz turbo
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iefbae6111d39107eacac7e61654311646c6981eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We already have RFI UPD settings to mitigate RFI noise issues in
platform. These UPDs were not getting filled via devicetree but
needed to be filled from fsp_params.c
Exporting these UPDs to chip.h will allow OEM/ODMs to fill it
directly from devicetree and also allow us to control it based
on boards instead of keeping it common across SoCs.
BUG=b:171683785
BRANCH=None
TEST=Compilation works and we're able to fill UPD from devicetree.Value
gets reflected in FSP UPDs.
Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The X86 Qemu targets use the AMD64 SMM save state, but unlike
most AMD CPU's the PM ACPI SMI port is not configurable and uses
the Intel default APM_CNT, 0xb2 port.
This will be used by the common save state handler.
Change-Id: Ifee9476f628a2df710fb4340ce6a19b008df1033
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45814
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prototype will be used outside of soc/amd.
Change-Id: Icc69cf8a910764b27edf64f0f527b8f6a9013121
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently coreboot has limited use for the SMM save state. Typically
the only thing needed is to get or set a few registers and to know
which CPU triggered the SMI (typically via an IO write). Abstracting
away different SMM save states would allow to put some SMM
functionality like the SMMSTORE entry in common places.
To save place platforms can select different SMM save sate ops that
should be implemented. For instance AMD platforms don't need Intel SMM
save state handling.
Some platforms can encounter CPUs with different save states, which
the code then handles at runtime by comparing the SMM save state
revision which is located at the same offset for all SMM save state
types.
Change-Id: I4a31d05c09065543424a9010ac434dde0dfb5836
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44323
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SMM_ASEG code only supports up to 4 CPUs, so assert this at
buildtime.
Change-Id: I8ec803cd1b76f17f4dccd5c573179d542d54c277
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The ASEG smihandler bails out if an unsupported SMM save state
revision is detected. Now we have code to find the SMM save state
depending on the SMM save state revision so reuse this to do the same.
This also increases the loglevel when bailing out of SMM due to
unsupported SMM save state revision from BIOS_DEBUG to BIOS_WARNING,
given that the system likely still boots but won't have a functioning
smihandler.
Change-Id: I57198f0c85c0f7a1fa363d3bd236c3d41b68d2f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for dumping GPIOs on Intel Lewisburg SKU C621A.
Tested=On OCP Delta Lake DVT, verify it executes successfully.
Change-Id: I58797914aa5816aedace094c179e832150ad5e2e
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The patch replaces if-else-if ladder with switch case for readability
purpose.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I268db8bc63aaf64d4a91c9a44ef5282154b20a53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47054
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the genesis variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.2.0).
BUG=b:172620124
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_GENESIS
Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org>
Change-Id: I70886c2c5a25f5de1a4941ff235547ee812fa50d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This patch adds the PMC MUX and CONx devices for adlrvp. Device
specific method contains the port and orientation details used
to configure the mux.
BUG=b:170607415
TEST=Built and booted adlrvp. Verified the PMC.MUX CONx objects
in SSDT tables.
Change-Id: I3b5bb73991feb99577c16fea00c381dd0f855769
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
The resource function is called for each device VID/DID. Only add
the memory resource map from the boot CPU (bus 0) and not for each
socket/CPU. This is a NUMA architecture and has a shared memory map.
All the resources must match across the sockets/CPUs, so they should
only be added to the map once.
Change-Id: Ia336f604441ae8d30b8418300da7c34ab9907cae
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move set_bios_init_completion() and helper functions from skx
and cpx soc_util.c to xeon common util.c. There are some slight
differences between skx and cpx, so used the more correct cpx
functions. Both cpx and skx platforms boot as expected.
Change-Id: Ie416b3a43ccdd14a0eb542786593c2eb4d37450f
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47172
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig entries, and update existing documentation to
accomodate both v1/v2 versions of the board.
Change-Id: I856bb914941211cfbec4fed871ba2a5a038e23c3
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46984
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct USB over-current mappings in devicetree now that the
GPIO config has been fixed per schematics.
Change-Id: I564630231933c7c17a2c0a2a403fdcca9189b92e
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The LAN NIC is onboard, not installed in a slot.
Change-Id: I77ee7ee8c944b7942ca78d35cd881277c4030ab9
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add strings for M.2 keying and number of PCIe lanes.
Change-Id: I2e13749b50263ee5c2388a419bc8d784af6bd880
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47251
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct PCIe clock source mapping in devicetree now that the GPIO
config has been fixed. Move ClkSrcUsage/ClkSrcClkReq registers
under their associated PCIe root ports.
Change-Id: Ibdaba51d971a39a6da6df82652b7420d7324dee5
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
- set pads GPP_B6/B8 for PCIe CLK_REQ lines
- set pad GPP_B14 to speaker output
- adjust comment for GPP_C22 / USB3_P1_PWREN
- set pad GPP_E4 to NF1 / SATA_DEVSLP0
- set pads GPP_E9/E10 to USB2_OC0#/USB2_OC1#
Change-Id: I8bf8af620370ec2d4c864e513db5d710a9c65d27
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47220
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new CONFIG_OVERRIDE_UART_FOR_CONSOLE token to override the index
of uart port, platform use a get_uart_for_console routine to decide what
index value should be used for console.
Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com>
Change-Id: I2079bd1e5ffa209553383b6aafe3b8724849ba2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The HOB does not move, place its location in .bss.
Change-Id: I2c6dbe4d64138e45fa1dfe7580ffa70d0441bd88
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47294
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cpu/car code only applies to pre-family-17h CPUs that still use
cache as RAM (CAR) and the PI code only applies to the pre-FSP vendor
code blob binaryPI interface.
Change-Id: I5a13d7e202bb745255fabb46110850c36b07de7a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47274
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In gpio.c file, we have community group array for each comm,
representing gpio groups within that community. Like there might be
group H,D, VGPIO and C within community 1. Community also may have
some reserved gpio and we also define those in an array which indicates
OS can't use those GPIO (through PAD_BASE_NONE)
Now when we define reserved pads in the middle of actual community
pads, it creates an issue while calculating an offset for GPIO
host own pad register. This is because function actually checks
current gpio index (lets say vgpio_39 in our case) and tries to get
group index from an array which we have defined. If we have defined
reserved gpios in between 2 communities, index calculated will also
account for reserved GPIO and register offset calculation will move
to next set of register (offset 0xC instead of offset 0x8).
Because of this coreboot won't configure HOST_OWN_PAD register correctly
and driver will not be able to get non-SMI interrupts for related gpio.
Align pad group as per EDS and pin-ctrl driver in linux kernel.
Reference: DOC#618876 (EDS volume 2)
BUG=None
BRANCH=None
TEST=VGPIO community index is correctly calculated. Drawlat board
boots fine with this change and warm reset also works.
Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting
this GPIOs with proper name to align with EDS volume 2
Also removing unused GPIOs at the end of community 4 (group E).
Since those reserved GPIOs are at the end of the community, it won't
affect the offset calculations within community. This change will also
help us aligning pad numbering with kernel pin-ctrl drivers too.
Reference: DOC#618876 (EDS volume 2)
BUG=None
BRANCH=None
TEST=Platform boots fine and basic functionality such as SD, Wifi works.
Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add information regarding the privacy pin on the overridetree and the
gpio.
BUG=b:171888751
Change-Id: I1ab19a863715ba5a928dd7c16402d398e5475edc
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add information regarding the privacy pin on the overridetree and gpio.
BUG=b:169840271
Change-Id: Ifa628dda03f3f65976850aeabaf516f528a921b7
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some devices, such as cameras, can implement a physical switch to
disable the input on demand. Think of it like the typical privacy
sticker on the notebooks, but more elegant.
In order to notify the system about the status this feature, a GPIO is
typically used.
The map between a GPIO and the feature is done via ACPI, the same way as
the reset_gpio works.
This patch implements an extra field for the described privacy gpio.
This gpio does not require any extra handling from the power management.
BUG=b:169840271
Change-Id: Idcc65c9a13eca6f076ac3c68aaa1bed3c481df3d
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update Power Limit2 (PL2) minimum value to the same as maximum value
for magolor board. DTT does not throttle PL2, so this minimum value
change here does not impact any existing behavior on the system.
BUG=b:168353037
BRANCH=None
TEST=Build and test on magolor board
Change-Id: I74e960de506d366cba2c8aefb23f9e69337fd163
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
All wakes by a PCH PCIe root port were lumped under one event source;
this commit splits them up so each root port gets its own ID in the
event log.
BUG=b:172279061
BRANCH=volteer
Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
All wakes by a PCH PCIe root port were lumped under one event source;
this commit splits them up so each root port gets its own ID in the
event log.
BUG=b:172279061
BRANCH=volteer
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icebcac3b69c605ecf6df37733b641397ea3c3ad0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Move this function to pci_ops.c, which is already included in the smm
build. This is required to use this function in elog functionality,
which is called from SMM.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie5583c04366c9a16bc1b00a6892d39eeafe5da49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
LTE module used in boten has a specific power on/off sequence.
GPIOs related to power sequnce are:
* GPP_A10 - LTE_PWR_OFF_R_ODL
* GPP_H17 - LTE_RESET_R_ODL
1. Power on: GPP_A10 -> 20ms -> GPP_H17
2. Power off: GPP_H17 -> 10ms -> GPP_A10
3. Warm reset: Power off -> 500ms -> Power on
Configure the GPIOs based on these requirements.
BUG=b:163100335
TEST=Build and boot Boten to OS. Ensure that the LTE module power
sequence requirements are met.
Change-Id: Ic6d5d21ce5267f147b332a4c9b01a29b3b8ccfb8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This support is required to power off certain components that exist only
in certain variants.
BUG=None
TEST=Build and boot Boten to OS.
Change-Id: Ib43ada784666919a4d26246a683dad7f3546fabb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Allow a USB device to define PowerResource in its SSDT AML code.
PowerResouce ACPI generation expects SoC to define the callbacks for
generating AML code for GPIO manipulation.
Device requiring PowerResource needs to define following parameters:
* Reset GPIO - Optional, GPIO to put device into reset or take it out
of reset.
* Reset delay - Delay after reset GPIO is asserted (default 0).
* Reset off delay - Delay after reset GPIO is de-asserted (default 0).
* Enable GPIO - Optional, GPIO to enable device.
* Enable delay - Delay after enable GPIO is asserted (default 0).
* Enable off delay - Delay after enable GPIO is de-asserted (default 0).
BUG=b:163100335
TEST=Ensure that the Power Resource ACPI object is added under the
concerned USB device.
Change-Id: Icc1aebfb9e3e646a7f608f0cd391079fd30dd1c0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46713
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy lpit.asl to pep.asl to have a clean patch series without moving
files and to be able to keep the replace-patch CB:46471 as small as
possible to avoid confusion.
Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds memory parts used by variant voema to
mem_parts_used.txt and generates DRAM IDs allocated to these parts.
Added memory
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:171755775
TEST=emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24d466f92a7e0fa3ab2f6241f0b5af025c53ed98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I39abfc644fef085cef2175086a0e45a040b244de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This patch makes Atlas resume from S0ix by AC plug and unplug.
BUG=b:165328935
BRANCH=atlas
TEST=Put Atlas in suspend. Wake it up by AC plug.
TEST=Put Atlas in suspend. Wake it up by AC unplug.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I95676d785bfc1488a8c1bdd3d56f2c38d95f3fb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
This change adds two functions that provide an IPC mailbox method via
ACPI for runtime clock configuration.
pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT
that can be called by other ACPI devices to send an IPC mailbox command.
This function is exported because some SOCs override the default PMC
device and need to call this function to write the method into the SSDT.
pmc_acpi_set_pci_clock() will call the method defined by the previous
function to enable or disable the PCIe SRCCLK for a specified root port
and clock pin. It can be called by the PCIe root port after turning off
power to the attached device.
BUG=b:160996445
TEST=boot on volteer device and disassemble the SSDT to ensure that this
method exists.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB
to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed
the size from 8 to 9 Kib in drivers/gma. This change makes use of
Kconfig option to pick the size for tigerlake.
BUG=b:171401992
BRANCH=none
TEST=build and boot delbin and verify fw screen is loaded
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB
to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed
the size from 8 to 9 Kib. This change adds Kconfig option to choose
vbt data size based on platform.
BUG=b:171401992
BRANCH=none
TEST=build and boot delbin and verify fw screen is loaded
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ia294fc94ce759666fb664dfdb910ecd403e6a2e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47151
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpigen_write_debug_namestr() - Debug = NAME
acpigen_write_return_namestr() - Return (NAME)
acpigen_set_package_op_element_int() - Set package pointer element
DeRefOf (PKG[ELEM]) = INT
acpigen_get_package_element() - Get package (not pointer) element
dest_op = PKG[ELEM]
acpigen_set_package_element_int() - Set package element to integer
PKG[ELEM] = INT
acpigen_set_package_element_namestr() - Set package element to namestr
PKG[ELEM] = NAME
acpigen_write_delay_until_namestr_int() - Delay while waiting for
register to equal expected value.
BUG=b:160996445
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I9b20a23872b7d4a50f03761032426ffbb722b9ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47196
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EEPROM in the camera module does not require any specific power
resources. This will ensure that no unnecessary resources are turned on
while accessing the camera EEPROM.
BUG=b:167938257
TEST=Build and boot to OS in Drawlat. Ensure that the camera EEPROM is
listed in the output of i2cdetect.
Change-Id: Iece9b3f657bf94a21cc08bf1745353575858f9b2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Handle AC connect and disconnect notifications from Embedded Controller
(EC) and wake from S3/S0ix.
BUG=b:172266344
TEST=Build and Boot to OS in Drawlat. Ensure that the system wakes up
from suspend on AC connect and disconnect on both the TypeC ports.
276 | 2020-11-04 12:21:29 | S0ix Enter
277 | 2020-11-04 12:21:40 | S0ix Exit
278 | 2020-11-04 12:21:40 | EC Event | AC Disconnected
279 | 2020-11-04 12:21:57 | S0ix Enter
280 | 2020-11-04 12:22:03 | S0ix Exit
281 | 2020-11-04 12:22:03 | EC Event | AC Connected
282 | 2020-11-04 12:22:35 | S0ix Enter
283 | 2020-11-04 12:22:47 | S0ix Exit
284 | 2020-11-04 12:22:47 | EC Event | AC Disconnected
285 | 2020-11-04 12:23:08 | S0ix Enter
286 | 2020-11-04 12:23:16 | S0ix Exit
287 | 2020-11-04 12:23:16 | EC Event | AC Connected
Change-Id: I7fa4ac0096548fd63af86e9f56c4c1ee25491399
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
End comment that (likely mistakenly) removed an EC query method.
Change-Id: Id192d665a22a8885d7cec56cd6b8ea207fb54402
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Power Limit2 (PL2) minimum value to the same as maximum value for
dedede variants (baseboard and drawcia). Currently, variants like boten,
waddledee, waddledoo, metaknight and wheelie uses the DTT entries from
baseboard devicetree since there is no override present for these variants.
So, these variants will also reflect this change of PL1 minimum value.
For madoo variant, PL2 minimum value already set the same as PL2 maximum
value. DTT does not throttle PL2, so this minimum value change here does not
impact any existing behavior on the system.
BUG=None
BRANCH=None
TEST=Build and test on drawcia system
Change-Id: I7ecf1ffcc7871192ebe18eb8c3c3fd3e1193721e
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47154
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Power Limit2 (PL2) minimum value to the same as maximum value for
jasperlake rvp board. DTT does not throttle PL2, so this minimum value
change here does not impact any existing behavior on the system.
BUG=None
BRANCH=None
TEST=Build and test on jasperlake rvp board
Change-Id: I862f7106846de5fb37f74419807eedc3096ded8a
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The regions TSEG, GSM, GMS should not be marked as cacheable
resources.
Change-Id: I083b096cf3ed250bca722674abe9feffdb2436d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
InternalGfx isn't used so drop it.
Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Config voema to use CSE LITE
BUG=b:171755775
TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ic4ca82ce844e6367da70ed052445943572ae7b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:171755775
TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ibedbbe8f9ac039cbde114ace3266ec067a4003ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Production Volteer devices have Cr50 TPM connected via SPI, depending on
Cr50 firmware version it may or may not support long enough interrupt
pulses for the SoC to safely be able to enable lowest power mode.
Some reworked Volteer devices have had the Cr50 (Haven) TPM replaced
with Dauntless, communicating via I2C. The I2C drivers do not support
being accessed early in ramstage, before chip init and memory
mapping, (tlcl_lib_init() will halt with an error finding the I2C
controller base address.)
Since the Dauntless device under development can be made to support
longer interrupts, or a completely new interrupt signalling mode, there
is no need to try to go through the same discovery as is done via SPI.
This CL will skip the discovery, enabling the S0i3.4 sleep mode in all
cases, on the reworked test devices.
BUG=b:169526865, b:172509545
TEST=abuild -t GOOGLE_VOLTEER2 -c max -x
Change-Id: I08a533cede30a3c0ab943938961dc7e4b572d4ce
Signed-off-by: Jes Bodi Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47049
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Individual drivers check whether the concerned device is enabled before
filling in the SSDT. Move the check before calling acpi_fill_ssdt() and
remove the check in the individual drivers.
BUG=None
TEST=util/abuild/abuild
Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
The current I2C3 bus frequency is 341 kHZ, which does not meet the spec.
This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C3 to bring
the bus frequency closer to 400kHz.
BUG=b:153588771
TEST=Verified that I2C3 frequency is 394kHz.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ie1ef95bb39d71fbb113120a0ec88305bc23e7ab9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Change-Id: I6e5679f66840105b3f9628071ac7aace9128107f
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This setting copy from puff reference board
and should measure again after whole system build.
BUG=b:155261464
BRANCH=puff
TEST=emerge-puff coreboot and check system speaker has sound output.
Change-Id: Idd5c3276e9306e81ea766d14ed1415a68dedc2ad
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47161
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reorder soc_util.c and remove the un-needed #if ENV_RAMSTAGE to match
cpx version in preparation for more de-duplication.
Change-Id: Iab343e903e2478709fe91739c9ca77f587286df7
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
List of changes:
1. Use devicetree.cb from default location
2. Create variant directory for ADL RVP with external EC as
'adlrvp_p_ext_ec'
3. Add initial overridetree.cb for 'adlrvp_p' and 'adlrvp_p_ext_ec'
to override 'devicetree.cb' as applicable.
4. Move all common files between 'adlrvp_p' and 'adlrvp_p_ext_ec'
to mainboard directory
TEST=Build and boot both ADLRVP with onboard and external EC.
Change-Id: I3591e214ed32dc9baaa49b92dff59579f29c7bd6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47335
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The OHCI header file declares various enums as follows:
enum { ... } enum_name;
Since the name is at the end, this is actually declaring a variable
called enum_name and *not* a type, which is causing a multiple
definition error in GCC 10. Move the enum_name before the opening brace
to prevent this.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I452c0a1b118990942aa53f1e7e77f5e8378e8975
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Headers in libpayload define various structs like so:
struct struct_name { ... } __packed;
However, these header files do not include the compiler.h macro that
defines what __packed is, so they are actually defining a variable named
__packed and *not* declaring a packed struct. This leads to defining the
same variable multiple times, which was caught by GCC 10. Add compiler.h
to the compiler parameters so it is included in all files automatically.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ia67182520dc94149e06fe9e03a14b3fc2ee29973
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Currently, there's no check for the table being programmed. This skips
programming a table if the table size is zero, or the pointer to the
table has been set to NULL.
BUG=None
TEST=Set table pointer to NULL, table doesn't run.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I7d09b47e7d619428b64cc0695f220fb64c71ef4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Expand fam17h to family 17h to make the help text slightly easier to
understand and add family 19h to the description of
SOC_AMD_COMMON_BLOCK_PSP_GEN2.
Change-Id: I9284c9c638e1d217d4605523dde004781f4343f9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Use the xeon_sp pch.asl to include the intel common lpc.asl.
Change-Id: I22ee9d325888808a9c775ecee0591b661e2bba4e
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the xeon_sp pch.asl to pickup the common block lpc.asl. This
allows deltalake to pick up any general pch asl updates. Currently,
generates the same asl.
Change-Id: I5005032b030d288fdf5ca2f99d21fe8e6c752037
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47304
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The BMC isn't always ready in 60 seconds if it printing debug output.
Give it 90 seconds to finish before timing out in coreboot.
Change-Id: I3932d3e8fad067e8971e82b45b499801fc78079f
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com>
|
|
Setting registers 64h[19:18] = 2 and 68h[14:13] = 3 enables OBFF, and
setting registers 64h[19:18] = 0 and 68h[14:13] = 0 disables OBFF.
Register at offset 0x64 is DCAP2, and offset 0x68 is DCTL2.
However, current code doesn't account for this. The result is that
register 64h[19:18] = 2 and 68h[14:13] = 0, which means the hardware is
OBFF-capable but support is disabled, which makes no sense. Given that
reference code and Broadwell both disable OBFF, disable it here too.
Change-Id: I6c1cafdb435ee22909b077128b3ae5bde5543039
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I957556bcb3f2d793ed2d9a9c966b2081f9be090c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47042
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Code does not match comment, but this time the comment is right.
Change-Id: I4e277a802c68c8a4e858b2e33e7ec69b41dd9773
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47044
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Testing shows that these registers are backwards. Use the definitions
from Broadwell instead. All affected boards use the same value for both.
Change-Id: Ie47c9fddc2e9e15ce4c64821ea3a69356ac31b1a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It is already done once when enabling PMBASE in early init.
Change-Id: I14289c9164ee1488c192fce721d86c89fa5cc736
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For all these southbridges, the lower nibble of PCICMD is read-only.
Tested on Asrock B85M Pro4 (Lynxpoint-H), LPC's PCICMD does not change.
Change-Id: Ib3b16b1b9651f7f3bd06ff8bc27dafd8a323e93c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The patch configures GPIO pins to enable DMIC.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I2907737071f7d6b3c88c492d90edf8455d1fa50a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
The patch enables ALC711 Audio codec.
Test=Verified on ADL RVP.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
