| Age | Commit message (Collapse) | Author |
|---|
|
Add default value in nissa and trulo devicetree.cb, ODM have to review
the board design to follow RDC#646929 Power Map requirement.
NOTE: The VccInAuxImonIccImax remains unchanged w/ and w/o this CL.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST='emerge-nissa coreboot chromeos-bootimage'
Change-Id: Iaedd34757aa6802edcae402e751bc39b9cfe9e0c
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the AST 2600 native graphics init driver to have a working
UEFI firmware menu displayed over KVM.
Change-Id: I2961576077ed3286df080cd09ffe68d835d8c3e7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I4a8b01a661a92630d41837a168e17a0fa3c50f04
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for AST2600 as found on Intel Archer City CRB by using
the code found on Linux's ast drm driver.
While on it do minor modifications found on the Linux drm driver
that also affect the other ast chips.
New log messages:
[INFO ] ASpeed AST2050: initializing video device
[INFO ] ast_detect_chip: VGA not enabled on entry, requesting chip POST
[INFO ] ast_detect_config_mode: Using P2A bridge for configuration
[INFO ] ast_detect_chip: AST 2600 detected
[INFO ] ast_detect_chip: Analog VGA only
[INFO ] ast_driver_load: dram MCLK=890316000 MHz type=3 bus_width=16 size=01000000
[ERROR] No header found
[INFO ] ast_select_mode: Failed to decode EDID
[DEBUG] Assuming VGA for KVM
[DEBUG] AST: Display has 1024px x 768px
[DEBUG] Using framebuffer 1024px x 768px pitch 4096 @ 32 BPP
[INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0x94000000
[INFO ] ASpeed high resolution framebuffer initialized
TEST: Booted on Intel/ArcherCity CRB and used the UEFI firmware menu
over KVM using native graphics init.
Change-Id: I3d2d58d493706673c1b2ba4953967b1641bd6395
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Change-Id: I6e94f44d50f2b53855adc1bb1cd6a1a5d9929003
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Update PCIe Segment, Bus, Device & Function for various IIO bridge
devices.
Change-Id: I01d164cf0717b3e817348e64e32478c2bb11a8b8
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
This commit drops tcss_d3_hot_disable chip config as FSP is not
exposing the same purpose UPD anymore starting with Panther Lake
SoC.
BUG=b:348678529
TEST=Build for fatcat
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d58
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Change-Id: I93912fa3a3e247fe5da2b2ac3ffa02a9d3dbb02a
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Updating from commit id c5b8de86c:
2024-07-22 18:07:11 +0200 - (Merge "feat(debugv8p9): add support for FEAT_Debugv8p9" into integration)
to commit id 8fb91783f:
2024-08-23 14:45:12 +0200 - (Merge "fix(intel): add in missing ECC register" into integration)
This brings in 213 new commits.
Change-Id: Ib52672e949a8e57fafc1ee9ae965a752020932b2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The declarations describing interface functions between SoCs
and openSIL glue code are common for the stub and Genoa POC,
and likely with future SoC openSIL implementations. Therefore,
move these out of SoC-specific header files and into
vc/amd/opensil/opensil.h.
This change facilitates swapping out the stub for the actual
openSIL glue code.
Change-Id: Icc8783ddb868f9f0c4cd357245604313eadfe531
Signed-off-by: Nicolas Kochlowski <nickkochlowski@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84428
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For next DVT build, hw adds this power ctrl.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery not present, increase PL4 limit from 9 to 40.
Get PL setting from internal thermal and power team.
AC+DC/DC:
PL1=15W
PL2=25W
PL4=114W
AC ONLY:
PL1=15W
PL2=25W
PL4=40W
BUG=b:355094551
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Confirm on lotso EVT board, as expected.
Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:342929824
BRANCH=None
TEST=boot to kernel success
Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use ALC256 as HDA codec on fatcat hence, added the verb table.
BUG=b:348678529
TEST=Tested audio playback using HDA ALC256 codec on PTL reference
board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d55
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84409
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:348678529
TEST=Memory training is successful on google fatcat board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d51
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84406
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit updates the fatcat mainboard to use the Panther Lake SoC
instead of Meteor Lake.
The changes include:
- Selecting the `SOC_INTEL_PANTHERLAKE_U_H` config option.
- Updating the `mainboard_update_soc_chip_config()` function to use the
`soc_intel_pantherlake_config` struct.
- Updating the devicetree to use the `soc/intel/pantherlake` chip.
- Updating variant header files to reflect the SoC change.
This update enables support for the Panther Lake SoC and its
features on the fatcat mainboard.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie0c6257dfb9dd1f627472ad220614f9b24c911ef
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84537
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit removes the virtual GPIOs for recovery and write protection
from the fatcat variant.
These GPIOs are not utilized on the fatcat platform, and their removal
simplifies the GPIO configuration and improves code readability.
The `CROS_GPIO_DEVICE_NAME` macro is no longer applicable for Panther
Lake SoCs. Future changes will introduce a suitable GPIO device name
that meets the requirements of Panther Lake.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I492fec28637edb2f84e9290b28dabce3f23aa867
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84536
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the SOC_INTEL_COMMON_BASECODE_RAMTOP Kconfig option for the
google/vell mainboard. This option ensures improving the boot time
on google/vell by 40ms in an average.
BUG=b:352330495
TEST=Able to reduced google/vell boot time by 40ms.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iedfd346c62b1ac79796042dd3569d846007b8f10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
When compiling with the C23 standard, bool, true, and false are
pre-defined by the language, so defining them in stdbool.h isn't allowed.
This fixes the following error:
src/include/stdbool.h:6:17: error: two or more data types in declaration specifiers
6 | typedef _Bool bool;
| ^~~~
src/include/stdbool.h:6:1: error: useless type name in empty declaration [-Werror]
6 | typedef _Bool bool;
| ^~~~~~~
Change-Id: Iec9b4e3f308008ece773ce3460daff97370161ea
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
"enable_c6dram" needs only 2 "states" to be clearly defined.
C provides "true/false", so use it instead of using unsigned int.
Change-Id: Icff1b42ceb2e89cc0b2e7abab6743430c635db7b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84155
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add device IDs for GNR PCIe root ports so that these devices can
be supported by the Xeon-SP PCIe root port driver.
Change-Id: I450c0088aa2e3be60489becf0600f534ea90d7a4
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84311
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP UPD VMX from Kconfig ENABLE_VMX.
Change-Id: I0c03f535b6f93761419657127e791c02e8ee4988
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84327
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both lpc.c and chip.c will create HPET table.
remove hpet_device_ops for avoiding create two HPET table.
Change-Id: I32628e98b5c1fac4b72ea3abf755b62847161bec
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I578b2c213ff1b33b4ca37e0422f690bedc9f5ba1
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84325
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IBL eSPI should be correctly configured by LPC driver so that console
input is usable.
Change-Id: I77cc6dd67b36035974e7f268d32b8473e8d83483
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Work around a GCC LTO bug. Even if no buffer overflow is bound to happen
as the soldered down path is taken GCC LTO complains about this.
Change-Id: Ib3d4ed8032bb06b6d08fbc2dc4b697df88745243
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Deku S0ix is blocked by the SSD. Enable RTD3 for the SSD to unblock
S0ix. RTD3 for SSDs has already been enabled on Rex and Screebo, too.
To prevent this S0ix blocking issue, RTD3 should also be enabled for
Karis.
BUG=361011799
TEST=Run suspend_stress_test and check whether DUT can enter S0iX.
suspend_stress_test w/o this CL
(with Phison PCIE Gen4 SSD PSENN256GA87FC0)
Suspend failed, s0ix count did not increment from 19182060
Substate Residency
S0i2.0 0
S0i2.1 0
S0i2.2 0
And PC10 residency is only 60% (by SoCWatch)
suspend_stress_test w/ this CL
(with Phison PCIE Gen4 SSD PSENN256GA87FC0)
Substate Residency
S0i2.0 0
S0i2.1 19186
S0i2.2 3389654
And PC10 residency is ~90% (by SoCWatch)
Change-Id: Iaded43a84ad1e245106d36a9d4aa83c40b046649
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84452
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as vell is using a converged firmware image.
This effort also helps to save vell boot time by 80-100ms as RPL FSP is
better optimized.
Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves
10ms of the boot time.
BUG=b:352330495
TEST=Able to build and boot google/vell.
warm reboot time w/o this CL
```
Total Time: 1,408,669
```
warm reboot time w/ this CL
```
Total Time: 1,235,651
```
Change-Id: I8f7dd76f00cfeff2908aeb805524706ac23403fa
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84491
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables unused I2C6 controller for the 'vell' variant of
the 'brya' mainboard.
BUG=b:352330495
TEST=Able to build and boot google/vell.
Change-Id: I5b39e44bb64bf2285c962249c0d94a8d5325f0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
TME, Total Memory Encryption will be enabled once the feature is
fully verified with Panther Lake.
Change-Id: I600c8a499df3b8796df35813422d0e89f67cc630
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84418
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Menu option wasn't showing due to wrong config flag.
Change-Id: I30592a8c3e57017473511366a8cf11928e55b5e9
Signed-off-by: Ana Carolina Cabral <ana.cpmelo95@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Create the kanix variant of the rex0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:368501705
TEST=util/abuild/abuild -p none -t google/rex -x -a
make sure the build includes GOOGLE_KANIX
Change-Id: Id74a084ed3cebb65625166e3098f43e41a63f5f9
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84432
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia54af1495a0146be3e5c3e74a0dcfef6785d6371
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84331
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update community preview guide for full Xeon 6 supports.
Change-Id: If0eb6d889e9c1c2ba162a94daeee260d51f48b83
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Earlier change (https://review.coreboot.org/c/coreboot/+/84019)
pushed to resolve the privacy LED blinking issue regressed the camera
autofocus functionality. This change updates the power resource for
NVM and VCM in line with the tivviks schematics to fix the issue.
BUG=b:365899407
TEST=Build and boot tivviks. Verified the Autofocus and all the
camera basic sanity tests.
Change-Id: Id3e256d59982ac176844e289f18ee450079704b9
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Compared to MT8186, MT8186T requires initializing the PMIC MT6319 in the DTS file, which necessitates using different SKU ID to distinguish between the MT8186 and MT8186T.
For MT8186, factory pre-flashed 0x7fffffff as unprovisioned SKU ID and
kernel can use the corresponding DTS file. To make MT8186T functional
on unprovisioned devices, change the SKU ID to 0x7ffffeff, so that the
correct DTS file will be selected by the payload.
BUG=b:365730137
TEST=1. Pre-flashed 0x7fffffff and boot OS.
2. Check OS boot normally by 0x7ffffeff.
BRANCH=corsola
Change-Id: I91306d3abd508e104851916882fb36a4fd302036
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84342
Reviewed-by: Knox Chiou <knoxchiou@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This patch updates the fatcat flash map layout to accommodate the growth
in Panther Lake IFWI blobs over Meteor Lake.
Release FMD:
SI_ALL: 8MB -> 9MB
SI_BIOS: 24MB -> 23MB
RW_UNUSED: 4MB -> 3MB
Debug FMD:
SI_ALL: 8MB -> 9MB
SI_BIOS: 24MB -> 23MB
RW_UNUSED: 3MB -> 2MB
TEST=Able to build google/fatcat inside chroot.
Change-Id: I8febb4df5d3b3eb07ebff8e56a1ce2dfd2f52e7d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I6012fd948b4350bda7af5390badac737553fa872
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84430
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I389934afcc533702078fc5533736f5e4a98cd553
Signed-off-by: Julia Kittlinger <julia.kittlinger@pm.me>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84444
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Similarly to what is done in Meteor Lake, the PortResetMessageEnable
UPD can be set based on usb2_port[].type_c setting and therefore
usb2_port_reset_msg_en is not necessary.
BUG=b/348678529
TEST=Build for fatcat
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d57
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84429
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Each TCSS port can be associated a setting via the tcss_cap_policy
device tree field. The setting can be picked within five values listed
by this commit.
BUG=b/348678529
TEST=fatcat board build tcss_cap_policy[0]=TCSS_TYPE_C_PORT_FULL_FUN
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d56
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Because PLATFORM_USES_FSP2_X86_32 default to false when
PLATFORM_USES_FSP1_1, efi_datatype.h wrongly defines EFI as
__attribute__((__ms_abi__)).
TEST=When some code involved in the build of a platform using
FSP 1.1 such as Google/CYAN includes efi_datatype.h, it does
not hit the following error: '__ms_abi__' calling convention
is not supported for this target
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5d
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84402
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I08881e3fb25abca8c34a04b3bea6534c0dbf391a
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84424
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The generated static.c file output by sconfig is currently added as a
prerequisite for all objects to ensure that static.h exists before
compiling anything that might need it. However, this forces every single
object out of date when the compiled devicetree is updated, even though
not every file actually needs static.h.
Only static.h actually needs to exist before compilation of other
objects, since static.c is an independent compilation unit that doesn't
need to exist before other objects can be built. Thus, change the
prerequisite from static.c to static.h, and add a rule for static.h that
depends on static.c. The recipe is a simple `true` since sconfig
generates static.c and static.h at the same time. To prevent unnecessary
recompiles, make static.h an order-only prerequisite [1] using the new
generated files argument for create_cc_template to ensure that the
header exists before any object might need it, but without forcing a
recompile of all objects by default whenever it is updated.
On a clean build, all objects will be compiled since they do not exist,
and these will occur after static.h is generated due to the default
order-only prerequisite. On subsequent incremental compiles, sources
that do need static.h will be appropriately marked out of date due to
the generated .d dependency files from the compiler, which list static.h
as a normal prerequisite for each objects that do include it, which
overrides the default order-only prerequisite. The dependency files
generated for all other objects will not include static.h, and thus the
objects will not be updated since the default order-only dependency does
not force them out of date.
After updating the devicetree of qemu-i440fx after a clean build,
comparing the build log with `make --debug=why` with the generated
dependency files indicates that only objects that actually depend on
static.h were rebuilt, instead of every object. Running a timeless
incremental build after making a change in the devicetree yielded
identical roms when performed with this patch and main, with the only
difference being the number of objects that needed to be rebuilt. Also
tested with the E6430.
[1] https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
Change-Id: I34efc162760ae703285f3982fa16cc23a86b37f6
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84387
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generated files such as static.h are currently added as prerequisites
for all compilation units to ensure that they exist and are up to date
before anything that might need them is compiled. However, this has the
side effect of forcing every compilation unit out of date when such
files are regenerated, even if the object has no dependency on the
generated file. GNU Make has order-only prerequisites [1] which are used
to define prerequisites that must be updated before a given target, but
which don't force the target out of date.
Add a new argument to create_cc_template, similar to the "additional
dependencies" argument, which allows dependencies on such generated
files for a specified object class and source suffix to be defined. This
new functionality will be utilized in subsequent commits to fix up the
dependencies on generated files.
Objects that do depend on generated headers will still be handled
correctly due to the .d dependency files that are generated by the
compiler during the build, which declare normal prerequisites to any
headers an object directly or indirectly includes. As per the GNU Make
documentation, normal prerequisites take precedence over order-only
prerequisites, so the header dependencies declared in the .d files will
override the order-only one declared through create_cc_template.
This does mean that a necessary rebuild of an object due to a generated
file may be missed if the dependency file from the compiler is missing,
but this is an unusual situation that is unlikely to occur during normal
incremental builds.
[1] https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
Change-Id: I50d87b3d9012967eefb197be12b2e0f096b0b67c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Mediatek SoCs start operating at eMMC clock around 3MHz right after
power-on due to wrong src_hz value. In JEDEC spec, eMMC clock needs
under 400kHz.
When we need to set a clock output frequency, we actually set a
frequency division value. Originally, we set the source clock
frequency to 50MHz, the target frequency to 400KHz, and get the
division value 128. However, the actual source clock frequency is
400MHz, so the final actual output is 400MHz/128=3.125MHz.
So we correct source clock frequency to 400MHz for eMMC output
clock of 400KHz.
BUG=b:356578805
TEST=test boot ok; measure eMMC clock ok; no boot time impact
Change-Id: I9c8836b23fb21e9b0bdc80fbe85142ea0fa5e381
Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.corp-partner.google.com>
Signed-off-by: Kiwi Liu <kiwi.liu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84298
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to add GPE1 block
rather than checking if GPE1_STS(0) is '0'.
BUG:362310295
TEST=with the flag, boot google/fatcat or intel/ptlrvp to OS and check
that FADT table includes GPE1. FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Without the flag, boot to OS and check that FADT table does not include
GPE1. FADT should have:
GPE1 Block Address : 0
GPE1 Block Length : 0
GPE1 Base Offset : 0
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Idd8115044faff3161ea6bd1cae6c0fe8aa0ff8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Due to beadrix DB has C1 port before, and add FW_CONFIG without C1 port for LTE sku.
BUG=b:364431483
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Set fw config to DB_PORTS_LTE and check
1.fw_config match found: DB_PORTS=DB_PORTS_LTE <= show LTE present message
2.USB3 port 3: enabled 1 <= LTE port enable
Change-Id: Ica5a2d6e19421b132a0bdbad77806a17e2c1ce69
Signed-off-by: Kevin Yang <kevin.yang@ecs.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84232
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
psys is not an optimal solution for no/low battery boot. Hence remove
function and macros related to psys implementation.
BUG=b:335046538
BRANCH=None
TEST=Build and boot on brox board
Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I01db9dad872cd4c9238b6c6aac73f3e6367710a4
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I3870bcd2482e55a5abcbd27cd0be18f25a35afbc
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84415
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add gfx register so GMA ACPI data is generated. Fixes brightness
controls on Windows.
Change-Id: I10948fb2ba670ba5232f1b116acdd1820ad0c07d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Change-Id: Ied08e5e9fe4913bd60474ed7dcf88b945172558d
Signed-off-by: Jeremy Soller <jeremy@sysetm76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In newer SOC, such as PTL, there is no DMI. Exclude DMI memory range in
northbridge.asl if DMI_BASE_SIZE is '0'
BUG=b:348678529
TEST=Build CB with DMI_BASE_SIZE set to '0' in the SOC directory. Boot
to OS and check ACPI PDRC device from the ACPI DSDT table. There should
not have an entry for DMI in its _CRS method.
Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I971af2eb214b5940fa09d9dc0f9717bb5f0dfb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84349
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the CL:chrome-internal:7651905,
Riven will use the fw_config to separate SAR setting.
CNVI + ID_0 --> wifi_sar_0.hex for WIFI6
PCIE + ID_1 --> wifi_sar_9.hex for WIFI7
BUG=b:366060274
TEST=build, enabled iwlwifi debug, and check dmesg as below.
iwl_sar_fill_table Chain[0]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
iwl_sar_fill_table Chain[1]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
Cq-Depend: chrome-internal:7651905
Change-Id: I647d64a008991a7a20791b2c87ea6308af6bb82e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84339
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
tuning
If real-time tuning was enabled, 'PchPwrOptEnable' was set two times
with different values. This patch fixes the issue.
BUG=none
TEST=Enabled FSP UPD debug output and checked 'PchPwrOptEnable' offset
Change-Id: I2f31015c1da51a4ae1b8d5226f5d7b60a6023f3d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84399
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The real-time feature should also be activated for all mc_ehl
mainboards, as it has already been done for mainboard mc_ehl1. It
improves performance in the real-time environment for these mainboards.
Change-Id: I04859b2f32bc11344b0620925f2414e7a6df625e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84391
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ordering of the USB-C port locations is swapped. When facing the
left panel, the correct ordering is port 1 (left) then port 0 (right).
Swap the positions of the two USB-C ports to their correct values.
BUG=b:349822718
TEST=Booted to OS, confirmed correct physical_location at
/sys/class/typec.
Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I465a6eebc2a41ca9a618b1e86dee015cea40800b
Signed-off-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The ELOG for CSE updates was being added in fsp_params.c, but the
actual update happens in cse_lite.c. This commit moves the ELOG to
cse_lite.c to more accurately reflect where the event is happening.
This also removes the need for a sol_type variable in
meteorlake/romstage/fsp_params.c.
It also helps to avoid redundant ELOG event entry while performing
CSE update (due to CSE RO to RW switch dependency).
BUG=b:361253028 (Multiple CSE sync elog prints for Nissa/Trulo)
TEST=Able to see only one instance of ELOG while performimg CSE sync.
w/o this patch:
elogtool list
0 | Log area cleared | 4088
1 | Kernel Event | Clean Shutdown
2 | Early Sign of Life | MRC Early SOL Screen Shown
3 | Early Sign of Life | CSE Sync Early SOL Screen Shown
4 | System boot | 29
5 | Memory Cache Update | Normal | Success
6 | Early Sign of Life | CSE Sync Early SOL Screen Shown
w/ this patch:
elogtool list
0 | Log area cleared | 4088
1 | Early Sign of Life | MRC Early SOL Screen Shown
2 | Memory Cache Update | Normal | Success
3 | System boot | 30
4 | Memory Cache Update | Normal | Success
5 | Early Sign of Life | CSE Sync Early SOL Screen Shown
Change-Id: I37fe3f097e581f79bf67db1ceb923f10ce651d62
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I60bb9e7df368b786e17bb49a6f35d27372fd21de
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84394
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I5cf34d8c4e27835d126eb66f2015d2e9d93b700f
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake-up from sleep states.
3. Add SoC ASL code for SoC IPs like IPU, HDA etc.
4. PTL replaces DMI3 with SAF to ensure
common/block/acpi/acpi/northbridge.asl binding with PTL change,
#if DMI_BASE_SIZE guard check is added in northbridge.asl
5. include GPIO ASL that supports new pinctrl schema.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f15
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit drops redundant CRASHLOG option for the brox and brya
mainboards as SOC_INTEL_CRASHLOG config is now selected by the
Alder Lake SoC directly.
TEST=Able to build and boot google/brox w/o any functional impact of
the crashlog feature.
Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the CRASHLOG config option for Chrome OS boards. This allows the
Chrome OS crash reporter to collect and analyze crash dumps, aiding in
debugging and improving system stability.
TEST=Able to build and boot google/brox
Change-Id: Ia23ef1cbebdba9a3b724204eb25ee788afa3e8fd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I685d1aaabab0cb14f88025cdc80d86342e354a63
Signed-off-by: Alicja Michalska <alicja.michalska@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84388
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the GPIO pins for ISH to notify EC about the
tablet mode change in accordance with schematic_20240607.
BUG=b:347811875
TEST=Build and boot google/trulo. Placed the device in tabletmode & on
EC console,"tabletmode" command shows "tablet mode".
Change-Id: Id22e397e46b522428ffdabe34a445ed7e4fb6fc5
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This reverts commit 88a496a9c81ba6447a4c1453a45d09ee79f30309.
This workaround is not valid with the latest Intel PRQ silicon,
so I'm dropping it now. Additionally, able to boot to ChromeOS without
any hang, and I also ran an S0ix cycle without any failures.
BUG=b:244082753
TEST=Able to boot google/rex0 to CrOS.
Change-Id: Idf0da5841705888d2787f61dd6e6fada2fbe3e3e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84368
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BRYA0 and BOARD_GOOGLE_BRASK.
BOARD_GOOGLE_BRYA_COMMON already selects a crashlog config, and
brya0/brask board eventually selects the BOARD_GOOGLE_BRYA_COMMON
config, making SOC_INTEL_CRASHLOG redundant.
TEST=Successfully built and booted google/brya0.
Change-Id: Iaff7954d4dafb4c6ca72a1521dfb434fb36b495a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84364
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON
already selects a crashlog config, and brox baseboard eventually selects
the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG
redundant.
TEST=Successfully built and booted google/brox.
Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I794899fa55b510e6f39dadc1a831b86389ab31ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Commit bc8f5405b542 ("tgl mainboards: Move usb{2,3}_ports settings into
XHCI device scope") not only moved the USB port definitions under the
XHCI device reference, but also combined multiple register definitions.
In doing so, it broke the inheritance from the baseboard, since the
variant overridetree registers now replaced the entire usb2_ports/
usb3_ports structs, rather than replacing individual array elements
therein. This resulted in any USB ports inherited from the baseboard
and not overridden by the variant being non-functional as they were
not included in the resulting combined devicetree.
To fix this, return to overriding individual array elements in the
usb2/3_ports structs.
TEST=build/boot google/drobit. Verify all USB ports present and
functional. Verify mainboard/static.c in built shows all ports.
Change-Id: I54921fa4ecf594a1ecbcfa7c45e5d745d4a95652
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84348
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
1)Modify jubilant cpu power limit setting depend on the brox
baseboad settgins,refer to CL:
https://review.coreboot.org/c/coreboot/+/83752
2)Update PL1,PL2, and PL4 value from jubilant thermal design
PL1 = 15W
PL2 = 41W
PL4 = 87W
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant photo SKU1 and SKU2
boards with AC w/o battery.
Test on AC 65W and 45W w/o battery,and check the PL values.
Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
This commit refactors the long battery string implementation to include
caching of the EC response for battery information (model, serial, and
manufacturer).
This optimization reduces resume time by approximately 63ms by
minimizing communication overhead between the AP and EC.
BUG=b:366338622
TEST=Verified on google/tivviks_ufs:
* Long battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING is enabled.
* Short battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING=n.
Change-Id: I32ae5b5e618f20335f3d344811a97f1416df529e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Older ChromeOS devices (pre-CR50) do not support reading long battery
strings. This commit adds a Kconfig option,
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING, to enable or disable this
feature.
This allows devices with TPM_GOOGLE (CR50/TI50) to read and display
long battery strings, while older devices like google/link, wolf, samus,
and chell will continue to display only the first 8 characters.
This change ensures compatibility with older devices while enabling
the display of complete battery information on newer platforms.
BUG=b:366338622
TEST=Verified on google/tivviks_ufs:
* Long battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING is enabled.
* Short battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING=n.
Change-Id: I7859809278b7e926bbe8beb1a0a9e12c7e6c220d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84352
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Change-Id: I88baa159475ac57ec6a2a638ab84f76a6af4fe82
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84318
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery is disconnected and only adaptor is connected higher PL2
power draw causes cpu brown out and system does not boot to kernel. To
avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome
power spikes from SoC during boot. Remove Psys implementation as it
impacts active state platform performance.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=Able to successfully boot on 3 different Brox proto2 SKU1
and SKU2 boards with 65W, 45W and 30W adaptors for 3
iterations of cold boot.
Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ia35c656a66c623e88579cf4b9e894c77a404c375
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
It return 0 when google_chromeec_command() on success, so
get_input_power_voltage() should return adaptor voltage instead of
psys_config default value.
BUG=b:329037849
BRANCH=firmware-brya-14505.B
TEST= cbmem -c | grep -i PsysPmax
Change-Id: I848c92752b7a7b53f47c6296aad0bdda20e9b0bd
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84333
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, Add_gpl() was only used with C and ASL source code files,
and was hard coded to use the C /* */ style comment, preventing it from
being used with files with other comment styles. Convert this into a
generic function for adding arbitrary SPDX license identifiers for
arbitrary filetypes. This replaces the hard coded GPL-2.0-or-later
string used in gma-mainboard.ads with a call to the new function.
This is also used to add SPDX headers to Kconfig and Makefile sources;
as previous commits added them to all such files in the tree.
Tested against logs from a Latitude E6430 (Ivy Bridge) and Precision
M6800 (Haswell) to check that license headers that were already being
generated did not change.
Change-Id: I24a1ccd0afb7045e878bf6eaae7a23f828a9240d
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia5a745c86595554c83cd13a35c312c17987b716b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75682
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iebfadffd2da83992af983b8c0dfe2706f81eb728
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84317
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic78190a6bff233388bf52fdbb94fa3d7812010f2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I816c6f68840c122fbc37085e31a1b0368a819f4a
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84313
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GNR-AP supports up-to 128 cores/256 threads per socket. Enlarge
MAX_CPUS to 512 = 128*2*2 with 2 socket configuration considered.
Change-Id: I8dc46dcdd3ca1c3ddfa47fbb28912a2c6e4c46fa
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84312
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP n-1 headers in vc/intel/fsp/fsp2_0/graniterapid are updated to
pass compilation with full platform codes.
Change-Id: I1d13ddd4db8409a4928bd1bf152a9c284d138e48
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For Xeon-SP, DCACHE_BSP_STACK_SIZE is by default 0x10000. For GNR,
this default size is enough. Use the default size so that more
CAR spaces could be saved for other purpose.
Change-Id: I68a79df150c4954ef8d703987d7c0bb446ba4cda
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84302
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till ramstage.
2. Include only required headers into include/soc.
3. Skeleton code used to call FSP-S API.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: I61930726ad0c765bfa1d72c5df893262be884834
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84332
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The calculation of non-eviction ways (used for cache-as-ram
configuration) has been simplified by removing conditional move
instructions and directly adding the remainder to the quotient.
This achieves the same ceiling operation but with potentially improved
efficiency (less instructions).
No functional changes are expected.
TEST=Able to build and boot google/rex.
Change-Id: I7cf5ff19ec440d049edc3bf52c660dea96b1f08a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:362672785
TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is
populated under the right ACPI device scope.
Scope (\_SB.PCI0.XHCI.RHUB.HS10)
{
Name (BRDS, Package (0x02)
{
0x00000001,
Package (0x0A)
{
0x00000012,
0x00000001,
0x00000001,
0x7C,
0x70,
0x70,
0x70,
0x70,
0x70,
0x70
}
})
}
Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:363854853
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
|
|
The fields spi_block_size and base_addr of regular PSP header, lookup
and reserved of combo header, are constants. So we
move the setting statements to the creation functions.
Only update the count, size and fletcher in later function
file_dir_header.
TEST=Binary identical test on all AMD SOC platforms
Change-Id: I55c400e45536a57841b01d7c90d3fef9afa53e78
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch
also refactors the PAD_* macros by,
- Repurposing PAD_FUNC and dropping PAD_FUNC_SEL.
- Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit
initialization.
BUG=none
TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot
Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is already a check for invalid reference, however `git rev-parse
reference` doesn't fail on unknown commit hash unless `^{object}`
peeling operator is used (`^{commit}` can be used as well).
Change-Id: I7ef39aeee2e902ac2fad6ac41b546c47418e1dec
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2023-09
to 2024-08. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202408), and updates the EFI filesystem drivers
which had been causing some issues with bootable USBs created using
Rufus as it tried to unload the filesystem drivers and load its own.
TEST=build/boot google boards link, panther, lulu, reef, ampton, akemi,
banshee, zork, dewatt, frostflow with edk2 payload selected.
Change-Id: I459b668345ed2a34e198e6a3d3a2da94b2940e69
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84293
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Binary identical test on all AMD SOC platform with use_combo
Change-Id: I41c5c6fb5acf92604dd06becf1eda680a1fab545
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84131
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The new layout definition has a new way to support combo.
It packs multiple ISH entries into PSP L1 directory.
TEST=Identical test on all AMD platform
Change-Id: If573cdeaeb56e95d2fed235c9337fab82d622757
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove PL4 value modification based on PsysPL3 value.
BUG=None
BRANCH=None
TEST=Built and boot on brox system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
With the release 20240910 of the Intel microcode repository, it also
includes the updated microcode file with version 0x129, which makes the
one from the coreboot blobs repo superfluous. Thus, use the one from the
Intel repository again.
Change-Id: I7fb58874719a8373072419e34b3f8923f7db927d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84295
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 2f56505:
2024-08-14 19:59:27 -0600 - (microcode-20240813 Release)
to commit id fbfe741:
2024-09-10 12:02:03 -0600 - (microcode-20240910 Release)
This brings in 1 new commits:
fbfe741 microcode-20240910 Release
Change-Id: If66975c71ade0f08b81fb90d0a91e61ca3405804
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84294
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
