coreboot.git - my copy of coreboot

Age	Commit message (Expand)	Author
2013-12-21	exynos5420: re-factor clock_get_periph_rate()	David Hendricks
2013-12-21	exynos5420: add a peripheral clock select --> PLL decoder	David Hendricks
2013-12-21	exynos5420: add CPLL and DPLL to the known list of PLLs	David Hendricks
2013-12-21	exynos5420: correct the PMS value for CPLL	David Hendricks
2013-12-21	exynos5420: Configure the UART pins unconditionally	Gabe Black
2013-12-21	exynos5250: Implement support to boot with USB A-A firmware upload	Julius Werner
2013-12-21	armv7: Allow accessing ACTLR (Auxiliary Control Register)	Hung-Te Lin
2013-12-21	exynos5420: re-factor the SDMMC GPIO config routines	David Hendricks
2013-12-21	exynos5420: configure SD_0_CDn as VDDEN for eMMC	David Hendricks
2013-12-21	armv7: Add CPU & MP primitive instructions	Hung-Te Lin
2013-12-21	exynos5420: init APLL at 1800MHz	David Hendricks
2013-12-21	exynos5xxx: use oscillator clock when changing ARM frequency	David Hendricks
2013-12-21	exynos5420: set L2ACTLR parameters for A15 cores	David Hendricks
2013-12-21	snow: Set up the i2s0 pins during boot	Gabe Black
2013-12-21	exynos5250: Add a pinmux function to set up i2s bus 0	Gabe Black
2013-12-21	armv7: add wrappers to read/write L2ACTLR	David Hendricks
2013-12-21	ARM: Don't inject nobits since we actually want to load these bits	Gabe Black
2013-12-21	ARM: Remove (NOLOAD) from the .car section	Gabe Black
2013-12-21	exynos5420: minor correction to CPU frequency print	David Hendricks
2013-12-21	armv7/exynos: Fix and remove memory reset workarounds	Hung-Te Lin
2013-12-21	Pit: graphics	Ronald G. Minnich
2013-12-21	kirby is dead. long live the arm pit.	Stefan Reinauer
2013-12-21	Snow: correctly disable trust zone hardware	Ronald G. Minnich
2013-12-21	Pit: correctly initialize trust zone	Ronald G. Minnich
2013-12-21	ARMv7: Fix location of CBMEM console in romstage	Stefan Reinauer
2013-12-21	pit: update PMIC write sequence in romstage	David Hendricks
2013-12-21	exynos5420: update set_cpu_id()	David Hendricks
2013-12-21	snow: TPS69050 -> TPS65090	David Hendricks
2013-12-21	kirby: pit: Fix up wakeup_need_reset	Gabe Black
2013-12-21	pit: Get rid of the mostly unnecessary exynos5420.h	Gabe Black
2013-12-21	exynos5250: Add mct_start to the timer init blob in timer_monotonic_get	Gabe Black
2013-12-21	kirby: Clean some cruft from mainboard.c	Gabe Black
2013-12-21	kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.h	Gabe Black
2013-12-21	Add a kirby board which is mostly a copy of pit	Gabe Black
2013-12-21	arm: Remove __image_copy_end from the ARM linker script	Gabe Black
2013-12-21	Exynos 5420: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	Exynos 5250: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	armv7: Prepare tables code for dynamic CBMEM	Patrick Georgi
2013-12-21	google/pit: disable SYSMMU for graphics	Ronald G. Minnich
2013-12-21	max77802: update header	David Hendricks
2013-12-21	Refactor code containing aux calls	Furquan Shaikh
2013-12-21	Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flags	Furquan Shaikh
2013-12-21	Add cpu transcoder attribute to intel dp	Furquan Shaikh
2013-12-21	Calculate transcoder flags based on pipe config	Furquan Shaikh
2013-12-21	Enable CAR migration on Exynos 5250 and 5420	Stefan Reinauer
2013-12-21	peppy: Set optimal DTLE register values	Shawn Nematbakhsh
2013-12-21	lynxpoint: Add configuration option for SATA gen3 DTLE registers	Shawn Nematbakhsh
2013-12-21	haswell: add option to change DqPinsInterleaved	Stefan Reinauer
2013-12-21	wtm2: disable SDcard USB port	Duncan Laurie
2013-12-21	haswell: Misc updates from 1.6.1 ref code	Duncan Laurie
2013-12-21	slippy/falco/peppy: Fix EC wake events in S5	Duncan Laurie
2013-12-21	Add a specific post code for S3 resume failures	Duncan Laurie
2013-12-21	Add Kconfig options to override Subsystem Vendor and Device ID	Duncan Laurie
2013-12-21	falco: Force enable ASPM on PCIe Root Port 1	Duncan Laurie
2013-12-21	lynxpoint: Add devicetree config option to force enable ASPM	Duncan Laurie
2013-12-21	lynxpoint: me: Disable some verbose messages	Duncan Laurie
2013-12-21	falco: Disable unused clocks	Duncan Laurie
2013-12-21	lynxpoint: me: Support ICC clock enables message	Duncan Laurie
2013-12-21	lynxpoint: me: Allow for more than MKHI MEI messages	Duncan Laurie
2013-12-21	falco: Enable EC controlled throttling	Duncan Laurie
2013-12-21	chromeec: Add event methods for EC requested throttle	Duncan Laurie
2013-12-21	falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5	Duncan Laurie
2013-12-21	pit: Add missing elements to the edid data structure	Gabe Black
2013-12-21	tpm: provide explicit tpm register access	Aaron Durbin
2013-12-21	pit: Bump the EC SPI bus speed up to 5 MHz	Gabe Black
2013-12-21	exynos5420: Fix some clock settings	Gabe Black
2013-12-21	exynos5420: Fix the clock divisor mask	Gabe Black
2013-12-21	arm: Don't use const pointers with the write functions	Gabe Black
2013-12-21	exynos5420: Get rid of the PWM code like on the 5250	Gabe Black
2013-12-21	exynos5250: Get rid of the PWM timer code we shouldn't be using anymore	Gabe Black
2013-12-21	exynos5420: Apply pwm const fix to the 5420 as well	Gabe Black
2013-12-21	exynos5250: Fix consts in the pwm code	Gabe Black
2013-12-21	arm: libpayload: Include stdint.h in cache.h	Gabe Black
2013-12-21	falco: add rtd2132 settings to device tree	Aaron Durbin
2013-12-21	rtd2132: implement full configuration	Aaron Durbin
2013-12-21	Remove PS/2 keyboard initialization on resume from S3	Martin Roth
2013-12-21	Libpayload: Add keyboard-disable function.	Martin Roth
2013-12-21	Add simple hexdump function	Stefan Reinauer
2013-12-21	nvramtool: add -MG to makefile to make it pass clang	Yunlian Jiang
2013-12-21	libpayload: Include hexdump.c in the Makefile so it gets built	Gabe Black
2013-12-21	Pit: set PWM to external on Parade	Ronald G. Minnich
2013-12-21	Pit: move parade writes to mainboard.c	Ronald G. Minnich
2013-12-21	peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.	Shawn Nematbakhsh
2013-12-21	Added structure members x_mm and y_mm to edid decoding	Furquan Shaikh
2013-12-21	FUI: Fill in link_m and link_n values	Furquan Shaikh
2013-12-21	Slippy: remove unneeded code in i915io.c	Ronald G. Minnich
2013-12-21	slippy/falco/peppy: Route USB to XHCI on resume	Duncan Laurie
2013-12-21	haswell: Add pei_data field for USB routing	Duncan Laurie
2013-12-21	haswell boards: fix SATA interrupt in ACPI	Duncan Laurie
2013-12-21	libpayload: Increase USB EHCI transfer timeout	Julius Werner
2013-12-21	haswell: Update microcode revision	Duncan Laurie
2013-12-21	slippy/falco/peppy: update ACPI C-state settings	Duncan Laurie
2013-12-21	lynxpoint: Avoid any ME device communication in S3 path	Duncan Laurie
2013-12-21	lynxpoint me: add support for mbp clear wait in finalize step	Duncan Laurie
2013-12-21	lynxpoint xhci: Add ACPI D0/D3 workarounds	Duncan Laurie
2013-12-21	Revert "lynxpoint: Move ME lock down to ramstage"	Duncan Laurie
2013-12-21	lynxpoint: power management setup tweak	Duncan Laurie
2013-12-21	SLIPPY: final changes for FUI	Ronald G. Minnich
2013-12-21	peppy: Duplicate SPD data for 2GB configurations.	Shawn Nematbakhsh
2013-12-21	chromeos: Check for recovery reason code in shared data	Duncan Laurie