summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-23mb/google/dedede: Skip the CPU replacement check for dededeV Sowmya
This patches enables the SkipCpuReplacementCheck config for the dedede baseboard to avoid the forced MRC training for all its variants with the soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddledoo. Cq-Depend: chrome-internal:3142530 Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-23soc/intel/jasperlake: Add the SkipCpuReplacementCheck configurationV Sowmya
Add SkipCpuReplacementCheck config to control the FSPM UPD used for skipping the CPU replacementment check to avoid the forced MRC training for the platforms with soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddleddo. Cq-Depend: chrome-internal:3142530 Change-Id: I63fcdab3686322406cf7c24fc26cbb535cc58c8d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-22sb/intel/i82801jx/hdaudio.c: Rename to `azalia.c`Angel Pons
Other Intel southbridges use this name for the HD audio codec. Change-Id: Ic96797e6c2028f082130211bb5f4270391f866c5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801ix/hdaudio.c: Rename to `azalia.c`Angel Pons
Other Intel southbridges use this name for the HD audio codec. Change-Id: I50dbf0a079944b7fa6cfd6622c0626bc9139af85 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801ix/sata.c: Use `probe_resource`Angel Pons
It is impossible for `find_resource` to return NULL, it dies instead. Change-Id: If8e26f768383e741100e3690322db3dabeec1922 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22ec/google/chromeec: Fix Coverity Scan error (BAD_SHIFT)Tim Wawrzynczak
A recent Coverity scan found an issue with the way the EC_HOST_EVENT_MASK macro was being used. It was being passed values between 0 and 63, but since it is doing basically (1ULL << (value - 1)), this caused a shift of -1 when `i` is 0 and also doesn't reach the 63rd bit of the mask. This is fixed by incrementing the start and end conditions of the loop by 1, so the event mask ranges from bits 0 to 63, instead of -1 to 62. Found-by: Coverity CID 1430218 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6a7cfa64545f3d313de24407f0a91b48368f2a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-22soc/intel/jasperlake: Move tco_configure to bootblockTim Wawrzynczak
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same problem to come up on jasperlake. Again, it should be harmless to configure the TCO device earlier in the boot flow. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If95e46124660b4ed457434f727c9f9f7b02b0327 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43539 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22soc/intel/cannonlake: Move tco_configure to bootblockTim Wawrzynczak
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same problem to come up on cannonlake. Again, it should be harmless to configure the TCO device earlier in the boot flow. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib8883d27b2a0994a67ec5e044a692a2e853fd680 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43538 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
Update Woomax configuration including GPIO, memory SPD table, I2C devices and USB type C. BUG=b:158343602 BRANCH=None TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I55ba995d9438551d45cb9e17f92b5089ccf4a5fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/43497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-22nb/intel/i945: Put names to northbridge PCI devicesAngel Pons
Tested with BUILD_TIMELESS=1, Getac P470 does not change. Change-Id: I0d51f48f0c1e37c41322a0eda49806925d9d194d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42285 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mainboard/amd/mandolin: describe where the two HDA codecs resideFelix Held
Change-Id: I99b062e4ce1cf862ea03b0edb6ea843df5f8f2b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-22mb/ocp/deltalake: Unset POWER_STATE_DEFAULT_ON_AFTER_FAILURETim Chu
Change PCH power policy. Set default of POWER_STATE_DEFAULT_ON_AFTER_FAILURE to n in order to change power state to S5 when power is reapplied after power failure. TEST=Base on CB:42289, CB:43338 and build for Deltalake. The following Kconfig options must be selected: select SOC_INTEL_COMMON_BLOCK_PMC select ACPI_INTEL_HARDWARE_SLEEP_VALUES select CPU_INTEL_COMMON_SMM Boot the system and check the last bit of GEN_PMCON_B is set to 1 through ITP with command: pch.pm_dump Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I4d4f14bdfc18740976171fd5d369b2d79a916dc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42976 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/ocp/deltalake: Set FSP log level and add default values if VPD variables ↵Johnny Lin
are not found 1. Read VPD variable 'fsp_log_level' to decide FSP log level. 2. Define the default values when the VPD variables cannot be found, put all the values to vpd.h for better documentation and maintenance. Tested=On OCP DeltaLake, the fsp_log_level can be changed from the VPD variable. Change-Id: I44cd59ed0c942c31aaf95ed0c8ac78eb7d661123 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-22vc/amd/fsp/picasso: mark remaining UPD header structs as __packedFelix Held
Change-Id: I5a97de69bfda201e039587c67037bfb93ca16c15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43658 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22sb/intel/i82801jx: Drop `docking_supported`Angel Pons
The three mainboards using this southbridge are desktop boards, which are not dockable. The Dell Precision M6400 laptop is dockable, but even though it has an Eaglelake MCH, it uses an i82801ix southbridge instead. So, one could still port that laptop to coreboot after this change! :P Also, drop the now-unnecessary `chip` and `dev` variables. Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801jx: Drop `c3_latency`Angel Pons
The three mainboards using this southbridge do not define it. Note that the default value of zero might be wrong, so add a FIXME comment. Change-Id: Id16bb12a4628daf311bddf7e4701fc480d6b18e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22Doc/tutorial/part1.md: Show how to list toolchain targetsDavid Hendricks
Change-Id: I276ea0a6b52b55b8772c76f48f7a0fb149af6e78 Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43518 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/google/kukui: revise config structure for Jacuzzi followersHung-Te Lin
There are more Jacuzzi followers coming and we want to have a simplified way of adding new boards. Now, detachable and tablets should select BOARD_GOOGLE_KUKUI_COMMON and clamshells should select BOARD_GOOGLE_JACUZZI_COMMON. BUG=None TEST=make menuconfig; make -j # for kukui, krane, jacuzzi, juniper BRANCH=kukui Change-Id: Ifc1eb6a3792f46c5db6b5346902f1114955b28ae Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-21mb/google/dedede: Create madoo variantIan Feng
Create the madoo variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161191394 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MADOO Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-21soc/intel/tigerlake: Select PLATFORM_USES_FSP2_2Subrata Banik
This patch performs below operations 1. Add support for FSP 2.2 2. Set EnableMultiPhaseSiliconInit to ensure bootloader can call FspMultiPhaseSiInit() API. 3. Provide placeholder to perform require chipset programming (example TCSS) before calling FspMultiPhaseSiInit() API. Change-Id: I15252d2db3f8e75d430b84e86cc5141225a3f981 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
This change drops the pulls configured on override GPIOs as they already have external pull-ups. Also, pads which are unused are configured as PAD_NC. BUG=b:154351731 Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-21sb/intel/lynxpoint/me_9.x.c: Add spaces around `=`Angel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I1baa731335a9c543c7d31b9aadc8758806750c64 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42629 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21mb/system76/lemp9: drop FSP_M_XIPMichael Niewöhner
Drop FSP_M_XIP since it's selected by the soc already. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I999d369be395de08d4ab7f115fedf4b7fa10eb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-07-21mb/system76/lemp9: drop ONBOARD_VGA_IS_PRIMARYMichael Niewöhner
Drop config ONBOARD_VGA_IS_PRIMARY as it's only needed for mainboards with multiple graphics devices. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I6525c65af3dcfc96ea3d68a1388432179e9ac43d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43636 Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21configs/config.stm: Correct config file nameAngel Pons
Otherwise, Jenkins doesn't pick up the file, and STM doesn't get build-tested. Change-Id: I7cf23c8352f82b2672c7ff25efba0057b8e059cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-07-21mb/lenovo/t430/gma-mainboard.ads: Replace with GPLv2+ equivalentPeter Lemenkov
Replace it with t430s/gma-mainboard.ads which is licensed under more flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing terms these files are identical. This makes diff between boards smaller. Change-Id: I633702d363134654e71e35404237d75b499f089a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-21mb/lenovo/t420/gma-mainboard.ads: Replace with GPLv2+ equivalentPeter Lemenkov
Replace it with t420s/gma-mainboard.ads which is licensed under more flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing terms these files are identical. This makes diff between boards smaller. Change-Id: I5393a603b5a4cd353149c1fa9e3e29020946b962 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-21security/intel/stm: Add missing <stdbool.h>Angel Pons
Jenkins does not build `config.stm` because the file name lacks the mainboard name. So, the code was not being build-tested, and it does not build because several files lacked the definition for `bool`. Add the missing #include directives. Renaming the config file so that Jenkins build-tests it is done in a follow-up. Change-Id: Idf012b7ace0648027ef6e901d821ca6682cee198 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43622 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21src: Use ACPI macrosElyes HAOUAS
Change-Id: I2cf11b784299708f02fd749dcb887b6d25f86f5b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-21soc/intel/baytrail: Add new CPUID 0x30679Mate Kukri
This ID is reported by newer mfg date SOCs. Needed for newer GBYT4 boards. Change-Id: I6af746d66a15f67553de1dc1c925e5cb0b181898 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-21mb/biostar: Add TH61-ITX portMate Kukri
- CPU: only tested with a Xeon E3-1220 (Sandy Bridge) - RAM: native raminit tested (4G+4G, 8G+8G) - USB: both chipset and ASMedia USB3 work, tested in SeaBIOS and Linux (5.4) - LAN: tested in Linux - SATA: all 4 ports work, tested in SeaBIOS and Linux - iGPU: I can't test it as I only have a Xeon for this socket - PEG: tested with an nVidia GT210, initialized by SeaBIOS - PS2 keyboard and mouse combo port: no devices to test with - Front panel header: tested, works - Audio: tested, works - Diagnostic LEDs: TBD Change-Id: I9fd3c0b148b694fcb8e728cc17f0bd45eb5af9f2 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43165 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21e7505/i82801dx: Use common code for early SMBusAngel Pons
While it looks different, the early SMBus code for this southbridge is still the same. In addition, this code was not checking the vendor ID before. It is assumed that adding this check does not pose a problem. Change-Id: I95ae4db399ce5592cefca82fa75f349220023b8c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42006 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21i945/pineview/x4x/i82801gx: Use common code for early SMBusAngel Pons
The early SMBus code for this southbridge checked if the PCI device ID is valid. However, we can't easily do that in common code, and we should not attempt to do so either: if a SMBus device behaves differently, then it should not be using the common code anyway. Since this southbridge is used with two different northbridges, we need to update both of them. Plus, x4x raminit no longer needs to know which southbridge it is paired with, since both i82801gx and i82801jx use the common early SMBus code, so we drop some preprocessor around includes. Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21gm45/i82801ix: Use common code for early SMBusAngel Pons
The early SMBus code for this southbridge checked if the PCI device ID is valid. However, we can't easily do that in common code, and we should not attempt to do so either: if a SMBus device behaves differently, then it should not be using the common code anyway. Change-Id: I5c21e091e437d23a173ddcf35d4f1efada6194cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42004 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21x4x/i82801jx: Use common code for early SMBusAngel Pons
The early SMBus code for this chipset was not checking the vendor ID before. It is assumed that adding this check does not pose a problem. Change-Id: I0c36c8cd8aca8db860b1edafd29d4f2dbaa2c822 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42003 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21sb/intel/lynxpoint: Use common code for early SMBusAngel Pons
Looks like no one uses early SMBus for now, but that may change someday. Change-Id: I42971662a279860a8c2e058fcb194fe5eba7c740 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42001 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21sandybridge/bd82x6x: Use common code for early SMBusAngel Pons
Change-Id: I95b82f3d733db2a46096205f23ed85aaff021e28 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42000 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21ironlake/ibexpeak: Move early_smbus.c to common codeAngel Pons
We will update the other platforms to use this common code in susbsequent commits. While we are at it, reflow a broken line, define the SMBus PCI device in the header and fix whitespace. Change-Id: I1fdff2feead4165f02b24cb948d8c03318969014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41999 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21device/cardbus_device.c: Drop `cardbus_size_bridge_resource`Angel Pons
It does nothing useful anymore. Drop it before it grows moss. Change-Id: I5f95376fe2a38eda5d819c53edb85ef11ab7a0f1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43591 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21soc/intel/xeon_sp/cpx: remove unused gpio.hMaxim Polyakov
This file does not contain useful information and is not used to build the image. The common GPIO driver from soc/intel/common uses layout in lewisburg_pch_gpio_defs.h [1,2] file, which is correct for all chipsets from the Lewisburg family: C621, C621A, C622, C624, C625, C626, C627, C627A, C628, C629, C629A [3] [1] src/soc/intel/xeon_sp/include/soc/lewisburg_pch_gpio_defs.h [2] https://review.coreboot.org/c/coreboot/+/39425 [3] Intel document #547817 Change-Id: I1f3ac4afff9e628890df8cec075fd3e42a590172 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43535 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Bryant Ou <bryant.ou.q@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21inteltool/gpio: Add support for new Lewisburg chipsetsMaxim Polyakov
- Add SKUs and Super SKUs of new Lewisburg series chipsets: C621A, C627A, C629A [1]. - These changes allow the utility to generate the GPIO config registers dump. [1] https://review.coreboot.org/c/coreboot/+/40395 Change-Id: I9b63c0a3860a901e58af0c0d5184361661bab5e3 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43534 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21util/inteltool: add missing L0 and L1 pads for LewisburgMaxim Polyakov
The description for L0 and L1 was missed in the datasheet, however, configuration registers for these pads are present. In addition, the chipset contains the "GPP_L0/CSME_INTR_IN" and "GPP_L1/CSME_INTR_OUT" pads in a circuit diagram. Use all available information to add a description for the missed pads. Change-Id: I7a0488c26b3df9de1adc037d94ae290837d65dd8 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40044 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21libpayload/xhci: Try harder to read 32-bit caps at onceNico Huber
With commit 287cf6c7d1 (lp/drivers/usb: Work around QEMU XHCI register issue) we restructured our capability register accesses because the compiler used the wrong access size. While we do use only 32-bit types now, a compiler may still try to be clever and optimize things in unexpected ways. So we add an explicit read32() now. For instance for the 8-bit MaxPorts field, in the most significant bits of `capreg + 4`, our read + mask + shift ((cap)->hciparams1 & 0xff000000) >> 24 was turned into a single 8-bit read instruction by GCC on x86: 31: 0f b6 52 07 movzbl 0x7(%edx),%edx Change-Id: I76accd0ef718e70ca46807eb06a9177c3afd99f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-20google/trogdor: Remove write_protect_stateEric Lai
This is no longer used for chromeos.c. BUG=b:160752610 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9a716a88ff9811fff46abca229be15522733bfef Reviewed-on: https://review.coreboot.org/c/coreboot/+/43472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-20drivers/intel/gma/Kconfig: Avoid dependency hell when ignoring strapsAngel Pons
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move it out of the `if GFX_GMA` block to break this unwanted dependency. TEST=Build for Librem 13v4 with no graphics init successfully. Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel: Define CONFIG_FIXED_SMBUS_IO_BASEAngel Pons
Make it default to 0x400, which is what the touched southbridges use. Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20mb/google/dedede: Update link frequency and end point structure for OV9734Pandya, Varshit B
1. Update Link frequency to 180 Mhz 2. Set data-lanes to 1 and 3. Update the clock-lane used by sensor BUG=b:155285666 BRANCH=None TEST=Build and able to capture image using user facing camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I164cb6af1003de561be8ce640e7653b7bcb3a22f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-07-20mb/amd/mandolin: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic8ee8fb6b6bcd04c653ab77cdc5e746a8cbd0c4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43466 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=Suspend and resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
This change drops internal pulls for dalboz reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP1800_S0 GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_32: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
This change drops internal pulls for trembyle reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP3300_A GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_90: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Report word-sized access for PM1a_EVTAngel Pons
According to the ACPI specification, version 6.3: Accesses to the PM1 status registers are done through byte or word accesses. The same is said about the PM1 Enable registers. Therefore, reporting dword-sized access is wrong and means nothing anyway. Since some other platforms use word-sized access, use word everywhere for consistency. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82801dx/fadt.c: Use ACPI_ADDRESS_SPACE_IOAngel Pons
Tested with BUILD_TIMELESS=1, AOpen DXPL Plus-U remains identical. Change-Id: I80ec4d0d6a8ec0dc02b377cfa3f3b5f0362dbb6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-20sb/intel/bd82x6x/fadt.c: Use definitions instead of numbersAngel Pons
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I2212a6dd4b02ac8fdcf1eafbab0226ad9faa825e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-20sb/intel/ibexpeak/fadt.c: Use definitions instead of numbersAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change. Change-Id: If0ee1b65a1be67ee9f5f832f076c365017a14e6a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-20src: Make HAVE_CF9_RESET set the FADT reset registerAngel Pons
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as reset register in FADT. How unsurprising. We might as well use that information to automatically fill in the FADT accordingly. So, do it. To avoid having x86-specific code under arch-agnostic `acpi/`, create a new optional `arch_fill_fadt` function, and override it for x86 systems. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-07-20src: Drop useless cache flush settings in FADTAngel Pons
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required on current ACPI versions and only maintained for ACPI 1.0 compatibility. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-20soc/amd/stoneyridge: Select HAVE_CF9_RESETAngel Pons
Looks like some preparation is needed before reset. However, Picasso also needs some special handling and still selects this option without selecting HAVE_CF9_RESET_PREPARE. So, just add HAVE_CF9_RESET for now. Change-Id: I0c6da9a43a28dbee916fd6bda9ae380ebd619edf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43388 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Never overwrite `fadt->flags`Angel Pons
Instead, just flip the desired bits using bitwise operations. As this is initially zero, the resulting value is the same. This allows flags to be set from anywhere regardless of execution order. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Icfd580a20524936cd0adac574331b09fb2aea925 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43387 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20soc/intel/xeon_sp/skx: Clean up FADTAngel Pons
Both `acpi_fill_fadt` and `soc_fill_fadt` set many FADT fields. Since the latter runs later, the values programmed in it overwrite any other values. Drop unused assignments and consolidate everything in a single function. Use `acpi_fill_fadt` as it is mandatory (no weak definition). Change-Id: Ia8248f20dae2b93426f309605bb2076592b08df4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43386 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82371eb: Declare reset register in FADTAngel Pons
According to Intel Order Number 290562 (PIIX4 datasheet), 0xcf9 is the reset register, and setting bits 1 and 2 will result in a hard reset. Change-Id: Id5ada6a10b2269d51908c6a5fd7745ef6c33a29a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel/i82801dx: Declare reset register in FADTAngel Pons
According to Intel Document 290744 (ICH4 datasheet), 0xcf9 is the reset register, and setting bits 1 and 2 will result in a hard reset. Change-Id: Id1a532857d9643d222d61c3902faadd471ae2a9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel/i82801dx: Drop unneeded PM2 settings from FADTAngel Pons
The PM2_CNT register block is not present on this southbridge, as per Intel Document 290744 (ICH4 datasheet). Also, the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register), says: This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Also delete a comment about `pm2_cnt_len`, which said that the right value differs from zero. Looks like that comment was wrong instead. Change-Id: Icbb32f5db7b368c764b3477c40f8ae9c788df5ee Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43383 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82371eb: Drop unneeded PM2 settings from FADTAngel Pons
The PM2_CNT register block is not present on this southbridge, according to comments on the code. As per the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register): This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Change-Id: Ib3ff0fd9e0725f61c38e60ba56b95e6e77b0b1ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43382 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20amd/{hudson,stoney,picasso}: Drop PM2 settings from FADTAngel Pons
The PM2_CNT register block is no longer needed, as explained in some comments. While they may have been copy-pasted around a lot, they are at least true for Hudson, and it makes sense to assume that they are true for newer chipsets as well. As per the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register): This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless PM1b settings from FADTAngel Pons
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event register blocks. According to the ACPI specification, version 6.3, sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers): If the PM1b_EVT_BLK is not supported, its pointer contains a value of zero in the FADT. If the PM1b_CNT_BLK is not supported, its pointer contains a value of zero in the FADT. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with PM1b for now. So, drop unneeded writes to PM1b fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless GPE1 settings from FADTAngel Pons
None of the currently-supported chips has a GPE1 block. The ACPI spec, version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says: If a generic register block is not supported then its respective block pointer and block length values in the FADT table contain zeros. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/puff: update USB3 gen2 parametersTim Chen
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2. BRANCH=none BUG=b:150515720 TEST=build and check the USB3 gen2 register on DUT is correct. Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-07-20soc/intel/cannonlake: Add configs for USB 3.1 Gen2 EV settingsJamie Chen
Add configs for USB 3.1 Gen2 EV settings so that people can set the EV settings per board in device tree. BUG=b:150515720 BRANCH=none TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All usb configs were set correctly. Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: Id4860665619095139c329565d433d9eb495cac02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39448 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/asrock/b85m_pro4: Enable VGA portAngel Pons
Now that libgfxinit has been fixed, trying to enable the Analog port no longer hangs the system, nor fills the monitor with unreadable garbage. Tested with linear framebuffer, displays correctly on a 1920x1080 VGA monitor. Scaling also works when a smaller HDMI monitor is connected as well. Legacy VGA text mode is also functional on either monitor, too. Change-Id: Ie2f88edcb7ed1984adebf2af23195767af13654c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43560 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-203rdparty/libgfxinit: Update submodule pointerAngel Pons
This brings in 4 new commits: * c0db994 common/Makefile.inc: Factor out generation TLAs * 3f86b0b Move `PSR_Off` out of `Power_And_Clocks_Haswell` * 450c24c haswell: Make VGA on FDI work * 3318bf2 Drop generation suffix from `Power_And_Clocks` Change-Id: I023b0c2bb403b3a9c9fe575a78cd2cf2f20b112a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-203rdparty/libhwbase: Update submodule pointerAngel Pons
This brings in 5 new commits: * 69e9086 mutime: Make Sinfo an imported constant * 9f87a10 time: Add T_First constant * 4e22910 Makefile: Adapt $(space) definition * d822df5 Makefile: Delay expansion of `$(ADAFLAGS)` * a3edc6e Makefile: Add `-gnatw_R` to suppress spurious warning Change-Id: I907e66fcf85da256a112a7069a3c551a6d8caaf0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43558 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3274Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3274. Compared to the current version 3197, v3274 adds most of the legacy UPDs in both FSPM and FSPS. BUG=b:159151231 BRANCH=none TEST=build and boot volteer proto2 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Id3f957aa9d9ad9710a3c930717c22f485699315e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43473 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-19sio/nuvoton/common/early_serial.c: Guard serial enableAngel Pons
If CONSOLE_SERIAL is not set, do not reconfigure the UART LDN. Otherwise, SerialICE stops working when the UART LDN is disabled. Change-Id: Ie3113e6b7b830dfdddc4d7709f00719f29e094bf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-19soc/intel/common/gpio_defs: Fix coding styleMaxim Polyakov
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard does not change. Change-Id: Ib4b4c28153398b6275728b28bda90e527d97e823 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41035 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-19mb/qemu-i440fx/memmap: Add warning when falling back to CMOS infosNico Huber
Change-Id: Iefac6fd45791cf6a051450b41046f7e7ebc1dc41 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-19mb/qemu/fw_cfg: Fix return code check for fw_cfg_e820_select()Nico Huber
Change-Id: I22b9eb6ead37dbba6807d145468843bd01c94c84 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-19mb/qemu/fw_cfg: Add info messages about (not) found filesNico Huber
Print some more information at BIOS_INFO, like our CBFS code does. Change-Id: I1431d569c57634277ea5cf7feb352419db432b44 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43444 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18Documentation: Add documentation for drivers/intel/dptf chip driverTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8915ead08a89dcf95fd92983eca5f85b82916dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/43533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-18ec/google/chromeec: Fix oversights in ec_dptf_helpersTim Wawrzynczak
GTSH was 2 instead of 20 (so it's 2 degrees K hysteresis), and TSRD was accidentally defined to take 0 arguments, instead of 1. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I14d28bacf44ac65043060b8579b3fbcec758c56c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-18ec/google/chromeec: Fix \_SB.DPTF._OSCTim Wawrzynczak
The DPTF._OSC method incorrectly assumed that all available UUIDs would be present in the IDSP package, but this is not always the case. Instead of matching an incoming UUID against an index into IDSP, search the IDSP package for the matching UUID. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I718b6abe09152647b14f7c1405b2d0d20035726b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-18mb/google/dedede: Convert static DPTF ASL into devicetree entriesTim Wawrzynczak
Since there is now a mechanism to generate DPTF ACPI tables and methods at runtime, dedede should switch to using that instead of raw ASL files. This patch converts the existing .asl files into devicetree entries. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6bb6e6e15f50a1e510080e16bbca09dfc5f16b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43422 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18drivers/intel/dptf: Add missing scope operator around TSR optionsTim Wawrzynczak
The previous DPTF patch train missed the proper scope operator around all of the TSR options. Without this, the optional GTSH and/or _STR Methods end up in the wrong scope. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18dptf: Fix scope of TCPU deviceTim Wawrzynczak
In the initial DPTF refactor, the scope of the TCPU device was incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the way that the acpi_inject_dsdt() callback currently works (it injects contents before the dsdt.aml file), the Scope where the TCPU device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing games with *when* things are defined in the DSDT, switch to defining all of the DPTF devices in the SSDT. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18mb/google/volteer: Update DPTF with temp sensor 3Tim Wawrzynczak
While the DPTF refactor was in progress, TSR3 was added to volteer's dptf.asl file, and I forgot to update the devicetree with TSR3 as well. Also missed a swap in the passive policies of TSR0 and TSR1. This patch fixes those. BUG=b:149722146 TEST=boot volteer, dump SSDT & DSDT, verify TSR3._STA returns 0xF Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I71bc798492ec45bb1e2f8d779e6829db52ef4499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
Vilboz requires a different HID than rest of the zork variants. Hence, this change sets the HID to AMDI1015 for I2S machine device in vilboz overridetree.cb. BUG=b:157708581 Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop the addition of I2S machine device from ACP driverFurquan Shaikh
I2S machine device has its own driver now. So, this change drops the support for adding I2S machine device ACPI node from ACP driver. BUG=b:157708581 Change-Id: I9069d92ae991e05fddcc7d45a2fd21e98c3b0de8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/google/zork: Switch to using newly added i2s_machine_dev driverFurquan Shaikh
This change switches zork devices to use the newly added i2s_machine_dev driver in devicetree rather than passing dmic_select_gpio in SoC config. BUG=b:157708581 Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17soc/amd/picasso: Add .scan_bus operation for ACP deviceFurquan Shaikh
This change adds `.scan_bus` device operation for ACP device to allow mainboards to add devices under it. BUG=b:157708581 Change-Id: I088bf81d7c7c5f59ade1d2f0dd24e5fc2b1ff876 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43542 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17drivers/amd/i2s_machine_dev: Add a driver for AMD I2S machine deviceFurquan Shaikh
This change adds a new driver for AMD I2S machine device. Currently, this device is added as part of `acp_fill_ssdt()` in Picasso, but with addition of this driver, this device can be added just like any other device in the devicetree. BUG=b:157708581 Change-Id: I49d1a867d7941397acca1054632b6ad855a021de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17device: Increase DEVICE_PATH_MAX to 40Furquan Shaikh
This change increases the maximum length of device path string to 40 characters to accommodate growing hierarchy of devices. TEST=Ensured that "\_SB.PCI0.LPCB.EC0.CREC.TUN0.RT58" is correctly added to SSDT. Change-Id: Id2ef71a32b26e366b56c652942a247de4889544a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/asrock/b85m_pro4: Select MAINBOARD_USES_IFD_GBE_REGIONAngel Pons
This board uses the in-PCH GbE controller, and its IFD has a GbE region. Change-Id: Ifc09640b2ebd613d3d5566a13b50d36c11e3c346 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43522 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/common/gpio: Add macro for PAD_NCFurquan Shaikh
This change adds a macro `PAD_NC` for configuring no-connect pads. This configures the pad as input with pull-down. Change-Id: I47c41c88ccfebe2c5dd9a24f85a120af9c8f56b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/amd/mandolin: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. Change-Id: I879b5614fb5d12c4814ee52f840a000744a7aab9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43520 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. BUG=b:153879530 Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop _INI and OSFL methodsFurquan Shaikh
This change drops _INI and OSFL methods under \_SB since they are not doing anything useful. _INI only calls OSFL and OSFL initializes OSVR if not already initialized and returns OSVR value. However, OSVR is not used anywhere and hence both these functions can be dropped. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4f3e1c93a855006cc115087fded20bfb76c1133e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43515 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
Global variable `PMOD` that stores the interrupt mode used by OS is required by all mainboards. This change moves the variable definition to globalnvs.asl under picasso. Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC until _PIC() method is called by OS. Thus, this change also updates the default value of PMOD as 0 i.e. PIC mode. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I731c03d965882281a7a23f55894451210ba72274 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop empty method CIRQFurquan Shaikh
This change drops empty method CIRQ() from pci_int.asl. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib342dcbc52cfacbd73a8a50ee087d97562d94c97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43513 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
GPIO_9 is associated with gevent 22. Correct all the misconfigurations and use macros for clarity as to what bit offset is being used instead of open coding things. BUG=b:161205804 Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Use read-modify-write for ACP_I2S_PIN_CONFIGFurquan Shaikh
This change uses read-modify-write to update ACP_I2S_PIN_CONFIG instead of a write operation since the other bits in the register are reserved. Change-Id: Ic64e1907858ec293c5f759e627d19c00d748a30e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43503 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:25:46 +0000