| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Id1078b14a805eea53d2a7c5a8183a5413f26e115
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71521
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5c77b6d1e1dc1134f62dcb3e93df01dc9c2f386c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71520
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Marasov, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on Marasov.
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
Change-Id: I4b65b8909c41b06852fe7771375029bd2e76e111
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71263
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds ISH ID for ADL-P to ensure dynamic ASL code is
added into SSDT.
With this patch:
Scope (\_SB.PCI0.ISHB)
{
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I48dc6056155824239bb88eda2b0ff5bcd36ced15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71262
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For marasov, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
TEST=Boot to OS on Marasov UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Change-Id: I278e5d403ef9515e538a527f43949e505d750bb1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71261
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
|
|
Replace Divide (a,b,c,d) with:
c = a % b
d = a / b
Change-Id: I0e9fdabbb4b5bd9698968cd8acb497dcde14e433
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71508
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Divide (a, b, c, d)` with these instructions:
c = a % b
d = a / b
Change-Id: I44366be5b5145a5d19f85df7a2f338866cb9c8b0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Replace `Not (a, b)` with `b = ~a`.
Change-Id: I0f18119c8e91222e59a56b8509f12c6ece6d04ce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71514
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Not (a)` with `~a`.
Change-Id: I53993fb7b46b3614d18ee001323f17efacbf04c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures vga_line_write() returns if the argument 1
(aka output string) is NULL.
TEST=Able to build and boot Google/Taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I716ce82c0afe21f7fe2f6d7bdc5229f8087242fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Change-Id: Icbd2ab736b9fc3300ee82896c31b373fe92e1d54
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71509
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6af7131e151700569d50e8bc42bfaeb7a58fa7d3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71507
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I75bc048d9e04be8d0cab25f6aad1c71d3e7a4008
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71506
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1ff0132e17b08f492828eb13d66e167eae45250d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71505
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab611cda1083da4378a6e509d11ea26bdbb45edd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71503
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7da6ee3c5bce6b32874e59ad46290b86db8f97c6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71502
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled()
functions combination with is_devfn_enabled().
2. Remove unused local variable of device structure type
(struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with
is_devfn_enabled() call.
TEST=Able to build and boot without any regression seen on MTL.
Port of 'commit 50134eccbdf4 ("soc/intel/alderlake: Make use
of is_devfn_enabled() function")'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I54bbd2bdba69a19e0559738035916fa7ac60faaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves API "smbios_cpu_get_max_speed_mhz()"
to common code from board specific. This API was made
generic in 'commit d34364bdea12 ("soc/intel/alderlake:
Utilize `CPU_BCLK_MHZ` over dedicated macro")'
BUG=NONE
TEST=Boot and verified that SMBIOS max speed value is
correct on brya and rex.
(brya) dmidecode -t : "Max Speed: 4400 MHz"
(rex) dmidecode -t : "Max Speed: 3400 MHz"
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I87040ab23319097287e191d7fc9579f16d716e62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70879
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5a589a43b1e92cca6b531ca161174eefb5592569
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I38e4b8c6adfaaa45377b2fbe0644285d21841cd1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
python3-setuptools installed via apt-get is not currently working to
build dtc from git.kernel.org. Falling back to setuptools version
58.2.0 allows it to build again.
The failure message was:
/usr/lib/python3/dist-packages/setuptools/installer.py:27:
SetuptoolsDeprecationWarning: setuptools.installer is deprecated.
Requirements should be satisfied by a PEP 517 installer.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I04cb6d776c3748f9a4b0cfc4ffd4f46458560d3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71500
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the file templates for creating a new variant of Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4abca1f999accc008eb2549fcc13199b8d9bdc7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Enable DPTF functionality for Meteor Lake Rex board.
BUG=b:262498724
TEST=Booted to OS and verified DPTF entries in ACPI SSDT on Rex board.
Change-Id: I87b2d71650be9ce940d9452bf4a76d4cd1ddba52
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70884
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With enabling FSP Notify Phase APIs, it has chance to issue a global
reset in FSP after CSE EOP (with selecting SOC_INTEL_CSE_SEND_EOP_EARLY
), which CSE already in idle mode and cause failure. For this reason we
should drop SOC_INTEL_CSE_SEND_EOP_EARLY in all ADL sku and select
SOC_INTEL_CSE_SEND_EOP_LATE instead.
BUG=b:261544011
BRANCH=firmware-brya-14505.B
TEST=tested and verified on Marasov, make sure this kind of global
reset can be executed successfully.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: I29736ca8efee64dd03feb48404241ee6295b7c72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Correct DDR4 SPDs from H5AG36EXNDX019 to H5AG36EXNDX017.
DRAM Part Name ID to assign
H5AG36EXNDX017 0 (0000)
BUG=b:236739240
BRANCH=Volteer
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: If248714088835eb5dd48fa12223c273199297228
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71160
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct Hynix ddr4 part number H5AG36EXNDX019 to H5AG36EXNDX017 by Hynix Memory spec.
BUG=b:236739240
BRANCH=Volteer
TEST="util/spd_tools/bin/spd_gen memory_parts.json ddr4" and verify it builds successfully.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: I6195fa1402691afc303f5223de48f552660cd97f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71159
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kano didn't use SSFC in mass production, however
Zydron needs SSFC for 2rd source mipi instead of fw_config.
BUG=b:262939431
TEST=Boot to OS and check functional with ov2740/hi556 camera.
Change-Id: Idb2a35d67af0b5a7dedc66b0f7eccd8a3b4612d1
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Contents of unsigned AMDFW in RW sections are verified twice in PSP
verstage - first time by vboot verifying the firmware body, second time
by CBFS verification while the file is loaded to update PSP about the
boot region. This redundant verification adds to boot time. Minimize the
redundancy by splitting the EFS header from the AMDFW body and keep them
as 2 separate CBFS files. This helps to improve the boot time by another
25 ms.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Observe boot time
improvement of ~25ms.
Before:
6:end of verified boot 363,676 (16)
11:start of bootblock 641,392 (277,716)
After:
6:end of verified boot 361,655 (16)
11:start of bootblock 616,967 (255,312)
Change-Id: Ib18a4f5c6781e5a7868e9395c0f1212da0823100
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70839
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to write EFS and AMDFW body to separate files. This is done
through passing an optional --body-location parameter to the amdfwtool.
If that option is not passed, then EFS will be written in the same file
as the AMDFW body. This will help to keep the minimum data to be
loaded/mapped from CBFS in PSP verstage.
BUG=None
TEST=Build and boot to OS in Skyrim.
Change-Id: I79325c81394cf8a0c663752d094adf6660896127
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70778
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:263413949
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I453fe8e1f4b4b8d4730ade259899d76aec949a44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
BUG=b:263412235
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia444cc8e3666fe15479ece81d068f9e8f1d339ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I04176fee373e534d42c72506df73a092ad55e65b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
WIFI_SAR_CBFS_DEFAULT_FILENAME is not exist, so return the non-exist
id has the same outcome.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib34e6b4f435880d62936ae54f19ba2ec752eced2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
WIFI_SAR_CBFS_DEFAULT_FILENAME is not exist, so return the non-exist
id has the same outcome.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib7a764d8cc3160c26abad9c1757812b955bef066
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ifde714c19f7ab9fe08f870060037db190a80dbd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use fw_config field to return sar filename instead of fw_config probe.
Return filename unconditionly because the sar_id must be valid in
CBI. If invalid sar_id, the file won't exist in CBFS by design.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7b75c5d4fd3c459ad7232bb16c6218a6218f1f77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Return UNDEFINED_FW_CONFIG with disabled fw_config.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0d31ff3ba7706039c622bd1ec825d216a0f21fe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This reverts commit d43154486d27323f64334203e9bc8baf08af6845.
From CB:68991: This causes CraterLake boot up process to die.
Investigation in progress.
Change-Id: I4a6c11b0e638a891108fe230bdaea92d5fbca020
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: siemens-bot
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 907a81e2a79f394c316644429165ae66679bafd6.
This reportedly breaks TPM and measured boot flow completely.
Change-Id: Id0d98ecc7807faa1617ad16dc9a24343c5a66b06
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens/digitizers.
This removes non-present devices from the SSDT and relieves the OS of
the burden of probing.
BUG=b:121309055
TEST=build/boot Windows/linux on all poppy variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I4c1d8ae8c41c1f4283718a86fccbf5ae4fc399b6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70921
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: Iee01dac943b6c2955f7af42ce0e9395fc609682f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70920
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For touchscreens/digitizers on poppy variants, drive the enable
GPIO high and hold in reset in romstage, then release from reset in
ramstage. This will allow coreboot to detect the presence of i2c
touchscreens/digitizers during ACPI SSDT generation (enabled in a
subsequent commit).
TEST=tested with the rest of patch train
Change-Id: I90ac4f09c343a28328f7d30254f0448cbe0c78b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Due to a high I2C bus load on the mainboard I2C frequency of 400 kHz
leads to poor signaling. Therefore limit the I2C speed to 100 kHz for
this bus. In addition, add a generic I2C device with 100 kHz bus speed
to the devicetree so that the OS will not switch to higher clock rates,
too.
Test= Measure the I2C signals at coreboot and OS runtime and ensure the
clock is always at 100 kHz.
Change-Id: I6b0a642cd3f5b77331663ac8c76ed0a116ae77ca
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71227
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When PTN3460_EARLY_INIT is selected, the PTN3460 (DP-2-LVDS-bridge) will
be initialized before all devices are initialized. This is necessary to
get a valid EDID data set into the PTN3460 before the graphic controller
is initialized in order to be able to show a splash screen.
For ptn3460_init() to work properly the I2C bus this bridge is connected
to needs to be initialized. As this I2C bus initialization would be done
too late in the normal flow, it needs to be called here explicitly
before ptn3460_init() to initialize the I2C bus with the needed
conditions. Otherwise the default I2C settings of the controller will be
used which results in a clock rate too high for this mainboard.
Test=Measure I2C bus signals and make sure that the clock is <= 400 kHz.
Change-Id: I1775fb7c2d29f765224d0e7c7ff9fcd4dbf847c5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71226
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
APs use a lot less stack, so set up a separate stack for those in .bss.
Now that CPU_INFO_V2 is the only code path that is used, there is no
need to align stacks in c_start.S.
Change-Id: I7a681a2e3003da0400843daa5d6d6180d952abf5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I5f9845dd3ea098d990710eaaa2d5db495f876cdd
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On broadwell devices, coreboot currently disables and hides the ME PCI
interface by default, without any way to opt out of this behavior.
Add a Kconfig option to allow for leaving the ME PCI interface
enabled, but set the default to disabled as to leave the current
behavior unchanged.
Change-Id: If670d548c46834740f4e21bb2361b537807c32bf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
On lynxpoint devices, coreboot currently disables and hides the ME PCI
interface by default, without any way to opt out of this behavior.
Add a Kconfig option to allow for leaving the ME PCI interface
enabled, but set the default to disabled as to leave the current
behavior unchanged.
Change-Id: I994cb5b05829eddad2e423a7440a9458f9952370
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch adds DPTF ACPI Device IDs into the header file
(soc/dptf.h).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib78258ac1b9a5252bb5e6fae4d7cc30a3f103e78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71126
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC specific implementation as DPTF driver can
now fillin those platform specific data using SoC specific macros.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If65976f15374ba2410b537b1646ce466ba02969b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch fills in a generic platform info structure based on the
inputs from the SoC dptf header file (soc/dptf.h).
It will help to make things common and drop unnecessary back and
forth call between common code and SoC code.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3521882495485cef686655abd65337515bae5faa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71111
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add DEVAPC_DEBUG option and set this option to disabled by default.
This option prevents DEVAPC log flooding during the boot process. Enable
this option when we need to debug DEVAPC issues.
TEST=DEVAPC log is disabled by default.
Change-Id: I26bc0378b8a766c6a8cc4903d64a921c3e96b93f
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71158
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add an option for SD card initialization.
2. If CONFIG SDCARD_INIT is configured, pass SD card detect GPIO to
payloads for SD card detection and initialize MSDC for SD card
configuration.
BUG=b:244250437
TEST=build pass
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Change-Id: I2d3683eb673f438c9190c11d4679a3ca97c76a98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71136
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Replace `And (a, b)` with `a & b`.
Change-Id: Id8bbd1a477e6286bbcb5fa31afd1c7a860b1c7dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `And (a, b, c)` with `c = a & b`, respectively `c &= b` where
possible.
Change-Id: Ie558f9d0b597c56ca3b31498edb68de8877d3a2f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70850
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Or (a, b, c)` with `c = a | b`, respectively `c |= b` where
possible.
Change-Id: Icf194b248075f290de90fb4bc4e9a0cd9d76ec61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70846
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftLeft (a, b)` with `a << b`.
Change-Id: I812b1ed9dcf3a5749b39a9beb9f870258ad6a0de
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70842
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftLeft (a, b, c)` with `c = a << b`.
Change-Id: Ibd25a05f49f79e80592482a1b0532334f727af58
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70841
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftRight (a, b, c)` with `c = a >> b`. One case was
simplified to just `a >> b`.
Change-Id: I889012b0a3067138e6f02d3fe8e97151effb5c2a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70840
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Only IO trap #3 for lenovo/x60,t60 and getac/p470 have implemented
the IO trap handler.
Change-Id: Ibadce174f673e88380f4b6745fd9ed8b73177a13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70367
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a page to add links to other sites that have firmware related
material, or other things that are of interest to the community.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Icf411e67bf865426b1a3b99ecbabed2302a7b738
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The touchscreen reset GPIO is configured as PAD_CFG_TERM_GPO with an
internal pull-down, which puts it in a state of contention when the
reset pin is released / set to high. Fix this by changing the reset
GPIO to PAD_CFG_GPO like all other poppy variants use for the
touchscreen reset.
TEST=build/boot nocturne, touchscreen still works.
Change-Id: I1ad4bb9d4194485990f54ffa7bae05f5c9a39deb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71185
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Test: build/boot google/sarien with non-ChromeOS build, edk2 payload.
Linux 5.15, Windows 11 tested.
Change-Id: Ibc1857e6b120b0bb827ed610981c4d2bf8f78d1f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple hatch variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I2eae486eaa5e42cfe42ecc066a58b09fe2bd9138
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71062
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I580348d0aabb24f0241d6e9992c5a17942bd57ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some ELAN touchscreens were missing the entries for the enable GPIO
and associated delays. Add them to variants with ELAN0001 touchscreens
missing the entries.
TEST=tested with rest of patch train
Change-Id: I9ce81ad6ee8183c522d05fbe3f57af87e5895df3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
For touchscreens on hatch variants, drive the enable GPIO high starting
in romstage, then disable the reset GPIO in ramstage. This will allow
coreboot to detect the presence of i2c touchscreens during ACPI SSDT
generation (implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I86c5f41b7820eaf5252c276ae854a4206e09385f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71059
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: I1939387b5bb98d6d282fd044e9ce8780dbe0d2c5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
With xDCI enabled, the right USB-C port does not work for USB data.
Additionally, it was disabled in stock ChromeOS firmware.
TEST=build/boot rammus, confirm right USB-C port works for booting,
under OS in Windows/Linux.
Change-Id: Ie343577d772563fa7d432b62aa8faa41d760102a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on berknip/morphius, verify all
touchpad functions work correctly.
Change-Id: I9d8362719ddbfe523dd83964556b05bb8f1bb1ba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on lindar, verify all touchpad
functions work correctly.
Change-Id: If2deedbd572b771c1e7793a3b3c37a3114aa2a48
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This should only contain resources that the PCI domain uses. Stolen
memory prevents the PCI domain from allocating anything where it is.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1562396f0b747a81bbc584314956809bd3865ff9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66267
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI: Improve comments and unify code word spelling
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1efbe930d0b8daec7c7bd2c1d84a4a3a5cad2ffb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie6572638c6bbe910745de55afa44458fb6b8db9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66240
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8997f9c111142a908b60675023d1a7dd86d3632a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66238
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a4a05f9c764eecaac3d473ba612dca6cc81518f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove Top of Upper Usable DRAM Low from MCHC as it isn't needed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifdd8c9ba61c5b1c6b154369413470e431ce8f5b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66231
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current implementation of the MCRS had several issues with BARs
and MMCONF not being available:
[ 0.156231] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.165302] pci 0000:00:18.2: can't claim BAR 0 [mem 0xddffc000-0xddffcfff 64bit]: no compatible bridge window
[ 0.192896] pci 0000:00:18.2: BAR 0: assigned [mem 0x280000000-0x280000fff 64bit]
...
[ 0.138300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138300] PCI: not using MMCONFIG
[ 0.148014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.149674] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.149679] PCI: not using MMCONFIG
[ 0.155052] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
This new MCRS, tested on the Star Lite Mk IV, resolves these issues:
[ 0.158786] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.197391] pci 0000:00:1f.1: BAR 0: assigned [mem 0x280000000-0x2800000ff 64bit]
...
[ 0.138460] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138460] PCI: not using MMCONFIG
[ 0.150889] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152548] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib6fc58efc9aadb5828251e0260622dac7ea3ef2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66244
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on coral, verify all touchpad
functions work correctly.
Change-Id: I161eb953bf8bceb353cf43803ee948c522928892
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on nami, verify all touchpad
functions work correctly.
Change-Id: I0611da8bbea41565e603a1a1b7cc20226ba21c62
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on bobba, verify all touchpad
functions work correctly.
Change-Id: I4fd66be21eeff5f37b58a8922c49683a28685064
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on liara, verify all touchpad
functions work correctly.
Change-Id: I89ca02629803882e7ed2048a5a26868fc2de41a9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on akemi/kohaku, verify all touchpad
functions work correctly.
Change-Id: Icb552caa69428908e5e3342139b578a145fa2797
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot ChromeOS, Linux 5.1x, Windows 10 on dewatt, verify all
touchpad functions work correctly.
Change-Id: I00efde6f007d57166cd82f76d2f389dedce57466
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on drawcia, verify all touchpad
functions work correctly.
Change-Id: I43eb5bc394a3fbfd4109f2e6c274ec66fc01d46d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=untested on brya, but tested under Windows/Linux on all other
boards in the tree using Synaptics touchpads.
Change-Id: Ia9351185b918f2d6f2d2be110b88e8310d37a03f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Audio codec RT1011_ALC5682I_I2S is listed as a fw_config option in the
baseboard, but missing from the HDA device probe list in the variant
overridetrees, preventing it from being detected at boot.
TEST=build/boot lindar, verify audio codec identified and HDA device not
disabled by fw_config.
Change-Id: Ib40b095688aac5cf4e0a60dcac250023c4f04c9f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple reef variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I8c90074515b1c7d3ab742768d7bbd904fec256d4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71154
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I1000df10eea5670bf1bc8d04c736150b6a5e26a1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For touchscreens on reef variants, drive the enable GPIO high starting
in romstage, then disable the reset GPIO in ramstage. This will allow
coreboot to detect the presence of i2c touchscreens during ACPI SSDT
generation (implemented in a subsequent commit). As the GPIOs are
already correct in ramstage, only the romstage ones need to be set.
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I10d1789c8de23653bac81e1f9604a47f93fa3f7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71152
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Id3ab412183e5c5d534b2e1dea3222c729c25118b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple volteer variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I0448d12a36f522b715e1fbeb8d37eb5a925ebc93
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71183
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I269361f90a838d7766ad429afe82ef885f0d9371
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71182
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For touchscreens on volteer variants, drive the enable GPIO high
starting in romstage, then disable the reset GPIO in ramstage. This will
allow coreboot to detect the presence of i2c touchscreens during ACPI
SSDT generation (implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: Ie4c3b94594253ced6a875af78e6390cda8dcbc7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71181
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Ib3c2a0e849006b7bf70cbd0bf6f32aa01ccf1bc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71180
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the UART port but only enable UART debug for EDK2
debug builds.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I54e1dc5768fd765254c7ede91eaa45842fed3bd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69322
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Root Complex Event Collector Endpoint Association Extended
Capability is defined in section 7.9.10 of PCIe 5.0 spec.
Add its Extended Capability ID, association bitmap for RCiEPs
register, and RCEC associated bus numbers register.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I7bede8ed88304a2925e6e1e4128bcdd625ee0e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Different PCHs have different definitions for registers. Here create
a lbg folder and move lbg specific codes to this folder so that we
can add new PCH code under xeon_sp folder.
* Create lbg folder and move lbg specific codes from pch.c to soc_pch.c
under lbg folder.
* Rename lewisburg_pch_gpio_defs.h to gpio_soc_defs.h and move to lbg
folder.
* Rename gpio.c to soc_gpio.c and move to lbg folder.
* Move pcr_ids.h to lbg folder.
* Move lbg specific codes from pmutil.c to soc_pmutil.c under lbg
folder.
* Create and revise makefile for files under lbg folder.
TEST=Can boot into OS on OCP Delta Lake.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I06555ed6612c632ea2ce1938d81781cd9348017a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Delta Lake documentation to add some clarification.
Add a section on how to work on coreboot for the Delta Lake server.
Change-Id: Id756ee0a09cdcd1200752a03e980441db1537ad1
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change provides config for devicetree to control ASPM per port
TEST=Build and Boot verified on google/rex
Port of 'commit 6e52c1da4a22 ("soc/intel/{adl,common}:
Add ASPM setting in pcie_rp_config)'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I284bf51628193aa5f82f21fbf29c57a6ea5f9cd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
