| Age | Commit message (Collapse) | Author |
|---|
|
Some platforms correctly build and boot with clang. Add this to our CI.
Change-Id: I82d756e071a0e575db73fbd91167d27cae3ddc18
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62173
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Fix the following warning:
error: use of logical '&&' with constant operand
[-Werror,-Wconstant-logical-operand]
Change-Id: I9a2f03a0e05088a780ce1e829859421b461032ca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69437
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The 64bit handles 64bit input variables properly.
TESTED: Both qemu and real hardware can use LZ4 properly which use this
code.
Change-Id: Ib43ec19df97194d6b1c18bfacb5fe8211ba0ffe5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For extern ethernet PHY access it is necessary to enable the 'scan_bus'
functionality.
Change-Id: I88050df2059ec7e0b27a132bca626eaef3d5dfb0
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69385
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Until now tcg-2.0/tss.c was just assuming certain buffer size and
hash algorithm. Change it to accept digest type, which the call sites
know.
Also drop `uint8_t *out_digest` parameter which was always `NULL`
and was handled only by tcg-1.2 code.
Change-Id: I944302b502e3424c5041b17c713a867b0fc535c4
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68745
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable RPL support for Agah.
BUG=b:258432915
TEST=build and boot ADL based Agah. RPL based testing
when hardware becomes available.
Change-Id: I5437dbf9e7812367a280d1ed659f286fb9b62a68
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69398
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9f6250fd0e26cfae2cc2128ca9413a5621d2df0c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This will enable crossystem to access WP GPIO
BUG=b:258048687
TEST= wpsw_cur in crossystem reads the correct gpio
Change-Id: I67f4a57025064dbf8c691255b0abae9d3fa0dbd3
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69468
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable the unused fingerprinter(FP) gpio for zavala by fw_config
FPMCU_MASK field.
BUG=b:250807253
TEST=build firmware and veriify the FP function on volmar DUT
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I0af1b7c3e4829ecab98525ead4f078c3eb6485d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69465
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:234776154
TEST=Build and boot Marasov UFS, copy ISH firmware to host
file system /lib/firmware/intel/adl_ish_lite.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adl_ish_lite.bin loaded
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic53a3cbdf83825adc27f37877a14f4f405d4a5ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69377
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch ensures that Marasov selects the ISH driver for
devices with UFS enabled.
BUG=b:256566011
TEST=Able to build Marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I97a0aa3bc6976be32ddbf1fc6b37c16bb62a62e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69379
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This replaces 'SPDX-License-Identifier' tags in all the files under
soc/mediatek/mt8195 for better code re-use in other open source
software stack.
These files were originally from MediaTek and follow coreboot's main
license: "GPL-2.0-only". Now MediaTek replaces these files to
"GPL-2.0-only OR MIT" license.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Change-Id: I79a585c2a611dbfd294c1c94f998d972118b5c52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66625
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This removes the dev_index argument from the google_chromeec_reboot
API. It's always set to 0, so don't bother passing it.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: Iadc3d7c6c1e048e4b1ab8f8cec3cb8eb8db38e6a
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69373
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't need to check the lower level error code to determine if an EC
call succeeded. Simply check the return value of the call.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: Iaf0795b0c1a2df0d3f44e6098ad02b82e33c5710
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69372
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
google_chromeec_get_uptime_info() doesn't need to return an error code
from the lower level calls for the caller to interpret. It is more
appropriate to return a success/failure boolean.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I3e27b8b4eed9d23e6330eda863e43ca78bb174a3
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69371
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
coreboot already has a ram failure post code defined, but the ram test
functions weren't using it, and were using 0xea instead.
This changes those failures to display 0xe3, the value defined in
post_codes.h by POST_RAM_FAILURE.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I21ef196e48ff37ffe320b575d6de66b43997e7eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The function pci_scan_bus had 3 post codes in it:
0x24 - beginning
0x25 - middle
0x55 - end
I got rid of the middle postcode and used 0x25 for the code signifying
the end of the function. I don't think all three are needed.
0x24 & 0x25 postcodes are currently also used in intel cache-as-ram
code. Those postcodes should be adjusted to avoid conflicting.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I19c9d5e256505b64234919a99f73a71efbbfdae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I2a255cdcbcd38406f008a26fc0ed68d532e7a721
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iea9dc65584c751e4d02524582b744ec9732e2c04
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It's not clear whether this variable should actually be used or not so
leave it be with a FIXME comment.
Change-Id: I4892600bfec55830acae56d2b293947c2d9ddd07
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69237
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang complains about this.
Change-Id: Ibe1de3057c17b4aa8ecbd87fac598e43294584e3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Doing this in C code is way easier to understand. Also the thread local
storage is now in .bss instead of the AP stack. This makes it more
robust against stack overflows, as APs stacks overflow in each other.
TESTED: work on qemu.
Change-Id: I19d3285daf97798a2d28408b5601ad991e29e718
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69435
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This makes it easier to get the content of an msr into a full 64bit
variable.
Change-Id: I1b026cd3807fd68d805051a74b3d31fcde1c5626
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68572
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Depending on whether qemu emulates an amd64 or i386 machine the SMM
save state will differ. The smbase offsets are incompatible between
those save states.
TESTED: Both qemu-system-i386 and qemu-system-x86_64 (v7.0.50) have a
working smihandler, ASEG and TSEG.
Change-Id: Ic6994c8d6e10fd06655129dbd801f1f9d5fd639f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I77a333827552741453d8b575f2a8009b3e1bf8f1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The disablement of SSE2 was not honoured since there is explicit
select under CPU_INTEL_MODEL_F2X. The removed commentary originates
probably from ROMCC romstage implementation.
Change-Id: I7d9ac007406a82c498f3ed23568e2ff064504983
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I7411e10348c36786000c6918b9b154b7329f3cd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Support GL9763E as a eMMC boot disk.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I2b29309615df381f1e24f29fc048c6f9bf216b7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69425
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib8bfafe9b359856ccfb11a70ab5a6c1ffd453c54
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Hook up the new EC driver.
Tested:
- Fn hotkeys work (brightness, display, volume, tp toggle, ...)
- Display lid
- Sleep/wake
- Camera (including Fn toggle)
- Bluetooth (both CNVi and PCIe card)
- Wi-Fi (both CNVi and PCIe card)
- CMOS options
Known issues:
- Touchpad toggle needs OS setup; see CB:68791
- UCSI is not implemented; see CB:68791
Change-Id: I6c4637936761cd62571b5d19fe2afd65560f49a0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59850
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up the new EC driver.
Tested:
- Fn hotkeys work (brightness, display, volume, tp toggle, ...)
- Display lid
- Sleep/wake
- Camera (including Fn toggle)
- Bluetooth (both CNVi and PCIe card)
- Wi-Fi (both CNVi and PCIe card)
- CMOS options
Known issues:
- Touchpad toggle needs OS setup; see CB:68791
- UCSI is not implemented; see CB:68791
Change-Id: I28ac401ada2945bb58fe862895458b10fed505fe
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68795
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop System76 EC, since the ODM board does not use it. Clevo EC FW
support will be added and hooked up cleanly in the follow-up changes.
Change-Id: I06abbde238be6d25842472a6a82159413ab52ef5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59816
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a driver for the ITE IT5570E EC in combination with Clevo
vendor EC firmware. The interface is mostly identical on various laptop
models. Thus, we have implemented one common driver to support them all.
The following features were implemented:
- Basics like battery, ac, etc.
- Suspend/hibernate support: S0ix, S3*, S4/S5
- Save/restore of keyboard backlight level during S0ix without the need
for Clevo vendor software (ControlCenter)
- Flexicharger
- Fn keys (backlight, volume, airplane etc.)
- Various configuration options via Kconfig / CMOS options
* Note: S3 support works at least on L140CU (Cometlake), but it's not
enabled for this board because S0ix is used.
Not implemented, yet:
- Type-C UCSI: the EC firmware seems to be buggy (with vendor fw, too)
- dGPU support is WIP
An example of how this driver can be hooked up by a board can be seen in
in change CB:59850, where support for the L140MU is added.
Known issues:
- Touchpad toggle:
The touchpad toggle (Fn-F1) has two modes, Ctrl-Alt-F9 mode and
keycodes 0xf7/0xf8 mode. Ctrl-Alt-F9 is the native touchpad toggle
shortcut on Windows. On Linux this would switch to virtual console 9,
if enabled. Thus, one should use the keycodes mode and add udev
rules as specified in [1]. If VT9 is disabled, Ctrl-Alt-F9 mode could
be used to set up a keyboard shortcut command toggling the touchpad.
- Multi-fan systems
The Clevo NV41MZ (w/o dGPU) has two fans that should be in-sync.
However, the second fan does not spin. This needs further
investigation.
[1] https://docs.dasharo.com/variants/clevo_nv41/post_install/
Testing the various functionalities of this EC driver was done in the
changes hooking up this driver for the boards.
Change-Id: Ic8c0bee9002ad9edcd10c83b775fc723744caaa0
Co-authored-by: Michał Kopeć <michal.kopec@3mdeb.com>
Co-authored-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Co-authored-by: Michael Niewöhner <foss@mniewoehner.de>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This EC code is for the Byte, a Cezanne Mini PC. The EC is different
to the Cezanne StarBook Mk VI. Rename it to `-desktop`, so the laptop
variant becomes the primary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I25f812cb1c6cefca1ebbe3bee5d20cf521dd60af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68319
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the characters per line limit was increased from 80 to 96, some
line breaks can be removed to improve code readability.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92aa3fec8c8caba143e418efc999ec4a7c5d93c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When no HOB list is found, not only adding the resources reported by the
FSP were skipped, but also adding the GNB IOAPIC resource was skipped.
Fix this bug by moving the reporting of the GNB IOAPIC resource before
the resources reported in the FSP HOBs to not skip the IOAPIC resource
when there's no HOB list.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9174c8d7e5e94144187d27210e12f2dca3a6010f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69460
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
gladios variant.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Id6f2bf2a79df883bcb70171051cec4c577ca3bc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69424
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The WCH CH347 presents a USB CDC serial port on interface 4 while in
operating modes 0, 1, and 3. Mode 0 also presents a UART on interface
2 but this is ignored for compatibility with the other modes. Mode 2
uses vendor defined HID usages for communication and is not currently
supported. Like the FT232H the data format is hard coded to 8n1.
Tested using a CH347 breakout board and a Dell Latitude E6400.
Change-Id: Ibd4ad17b7369948003fff7e825b46fe852bc7eb9
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68264
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Required for 2nd COM port to work.
Change-Id: Ib211e9c4b487fadec3d3487f9d745f44d8ca4579
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some hardware uses more instances.
Change-Id: Ie4ed2ce0d077013b450df99a88e904c8658cfc2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68121
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are used on newer platforms.
Change-Id: I20dc77fb6f83dc813e3da5fe30f8f52068fc4662
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The FSPM and FSPS UPD signatures hadn't been updated from their cezanne
origins. Change them to MNDCNO_M/S.
BUG=b:240573135
TEST=Build & boot, see new signature in boot log.
Change-Id: I9e4fcf7a9bf802aaba88f3dccf6da064c5686e96
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Without a cast the aritmetics of
tat = einj + sizeof(acpi_einj_smi_t)
is the same as
tat = (uintptr_t)einj + size(acpi_einj_smi_t) * size(acpi_einj_smi_t)
So it overshoots the intended offset by a lot.
This issue only came apparent because now einj is in the small IMD
region which is close to TSEG. With the wrong aritmetics the tat
pointer ended up inside TSEG which is not accessible from the OS
causing exceptions.
TEST: observe that tat pointer is inside the small IMD below
TSEG (0x78000000 on our setup).
"acpi_create_einj trigger_action_table = 0x77ffe89c"
Change-Id: I3ab64b95c33eef01b2048816a21e17855bcb2f54
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
It is no longer necessary to explicitly add "ERROR: "/"WARNING: " in
front of every BIOS_ERR/BIOS_WARN message.
Change-Id: I22ee6ae15c3d3a848853c5460b3b3c1795adf2f5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I6ff18e5ede0feda65f81c064394febd3eebc5247
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55316
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Commentary about mixing LAPIC IDs and IOAPIC IDs was wrong,
remove it. The only platform affected is aopen/dxplplusu with
i82801dx southbridge.
Change-Id: I1276a2050cabaaf07f740c2490d92c48bd5801fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I6b0e4021595fb160ae3bf798468f4505b460266f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I9fd9cf230ce21674d1c24b40f310e5558e65be25
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using this I/O APIC IDs will be assigned incrementally
in the order of calling. I/O APIC ID #0 is reserved for
the I/O APIC delivering GSI #0.
Change-Id: I6493dc3b4fa542e81f80bb0355eac6dad30b93ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Read I/O APIC ID and vector counts from hardware.
Change-Id: Ia173582eaad305000f958c5d207e9efaa06d8750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
to soc
Move SMBIOS type 4 override functions from mainboard to soc so that all
xeon family cpus share same functions without implementing again.
Tested=On OCP Deltalake, dmidecode -t 4 shows expected info.
Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com>
Change-Id: I17df8de67bc2f5e89ea04da36efb2480a7e73174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add definition for smbios type 4 and type 9
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I559995b0204f8e5bdeef2c0f8b394f9011d72240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Skyrim platforms have I2C3 controller which is shared between PSP and
X86. In order to enable cooperation, PSP acts as an arbitrator. Enable
SOC_AMD_COMMON_BLOCK_I2C3_TPM_SHARED_WITH_PSP, so that proper driver is
binded on the OS side.
BUG=b:241878652
BRANCH=none
TEST=Build kernel and firmware. Run on skyrim and verify TPM
functionality.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I2a3de8cb2b9241e2d81e02df49f317ac0408d5bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Updated comment as per guidelines.
BUG=b:232302324
TEST=none
Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com>
Change-Id: I6a925477a926e7e9d54e42d662768536318ec8e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Document: 614109, 601458
Tested on: Protectli vault_ehl (VP2420)
Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com>
Change-Id: I54948741082ca1072642046f64539a4c15ddb578
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Enable WLAN power and deassert the various radio disables.
TEST=boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2d21905001fa776c0d5c864d83dcd697e3febe0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Change the EC FW CBFS filename prefix to a more accurate "ec/"
TEST=build and boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib9ee24ca06b29c74cc0a91f9e4789df00ba1ba53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
To support an RPL SKU on marasov, marasov must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for marasov so that it will use the RPL
FSP headers for marasov.
BUG=b:254365935
BRANCH=None
TEST=FW_NAME=marasov emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I7874420c0fb51b9cc616cd979ffc9349c381602e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69367
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 4 (0100)
H9JCNNNCP3MLYR-N6E 5 (0101)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifa0637b47d0017cdb9e26ed32328f4405c0df3f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69311
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
update devicetree setting per the schematic
BUG=b:254365935
BRANCH=None
TEST=Built successfully
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifa4cb18b8e1a7b162f505ff12612ef808fb7061a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69364
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This kind of allocation without '=' is not working with clang.
Change-Id: I2d3e9eb44c3e0e25e5a67c5386e5ddde1487cc74
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63063
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It looks like this code was not finished so it's left commented out
for now.
Change-Id: I442a42e297f2968dd2c824a93a9a1e2bc74ea2f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63074
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8fedea1d566f0c35a9e028d4b2bb939592bd5f74
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The EC_CMD_USB_PD_PORTS host command returns a
struct ec_response_usb_pd_ports, not a
struct ec_response_charge_port_count.
Luckily, both structs have the same memory layout, so this is simply a
name change.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I0d7710ca8a45f0ea3939f58bbba6bab31ff41919
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69370
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify the implementation of setting the keyboard backlight PWM
value. Host command stubs typcially don't need to examine the host
command's return value as stored in cmd_code because that level of
detail is not very interesting. Higher value error codes are returned in
actual result structures.
This host command can return EC_RES_ERROR for out of range PWM values
which is already a generic error and unlikely to happen since we already
limit the range to 0..100 here. Finally, none of the callers in coreboot
check the return value.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: If17bc4e31baba02ba2f7ae8e7a5cbec7f97688c5
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69369
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT command does not return data, so
don't specify a result buffer.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: I5b9a0d228e187a9337498246a3b9ed8db07b95c7
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
Add an ACPI method to handle EC_HOST_EVENT_PANIC (bit 24) events.
EC panic is not covered by the standard (0-F) ACPI notify values.
Arbitrarily choosing B0 notify, which is in the 84-BF device specific
ACPI notify range.
This will be a no-op until the kernel driver is also updated to handle
this event.
BUG=b:258195448
BRANCH=None
TEST=Observe event with modified cros_ec_lpc driver
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: Iafa642c1c50f9a0083a8e618e1eabec9a7ce39b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69391
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Update the google_skyrim.with_binaries to test printing the STB
entries.
- Add a new saved config to test building without video, building
using an x86 verstage, and STB_SPILL_TO_DRAM
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idddcf2441b91b79575e5dfed1cc56d207234205b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
BUG=b:257879909
Test:Boot to OS on craask and check stylus GPIO pins
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I7e3a2583187c8a8e2616a5272b5a7a61debe982b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69138
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Request by thermal team, make below changes:
1) tdp_pl2_override: 12 --> 25
2) pl1.min_power: 3000 --> 5500
3) pl1.time_window_max: 32 * MSECS_PER_SEC --> 28 * MSECS_PER_SEC
4) pl2.min_power: 12000 --> 25000
5) pl2.max_power: 12000 --> 25000
6) pl2.time_window_min: 28 * MSECS_PER_SEC --> 1
7) pl2.time_window_max: 32 * MSECS_PER_SEC --> 1
BUG=b:239495499
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I88c8c4e6798ec5bc2930dd713e8c8b2c543cfaf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68523
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
|
|
Update SX9324 related settings based on tunned values from the ODM.
This patch supports both legacy and upstream Linux's SX9324 driver.
BUG=b:242662878
TEST=i2cdump -y -f 13 0x28
(Verified register values on Pujjo)
Signed-off-by: Victor Ding <victording@google.com>
Change-Id: I34d8073ffe93e6939f8da0cd7efb8667c0e9ac37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69366
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie3a08799294729beec83faf819fb1f249c6461cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I2b611773e596bea4788b05a3f58485fb3e002402
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69362
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This finds all the boards using a specified Kconfig option and runs both
CrOS and non-CrOS abuilds on them to make sure they're working.
Nobody wants to run the full what-jenkins-does build on their host
machine. Hopefully this can help get some tests run locally before
pushing to coreboot.org.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifc71c28bf64a805f203a815a9468ff9fe882aad3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The deadlock prevention is also needed with CONFIG_X2APIC_RUNTIME when
the cpu is in x2apic mode.
TESTED: Fixes SMI generation on xeon_sp hardware with
CONFIG_X2APIC_RUNTIME.
Change-Id: I6a71204fcff35e11613fc8363ce061b348e73496
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This commit factors out `struct xhci_usb_info` from intel specific code
as it will be useful on other platforms.
BUG=b:186792595
TEST=Builds for volteer
Change-Id: I5b4cc6268f072c6948f11c7498a564d7a5c0a190
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This commit factors out some code for XHCI port status values.
BUG=b:186792595
TEST=Built coreboot for volteer device
Change-Id: I045405ed224aa8f48f6f628b7d49ec6bafb450d7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
DTTS is Dynamic Thermal Table Switching Proposal.
DTTS needs one bit to save the body detection result from EC.
Define mode change STTB bit for Desktop (1) and laptop (0).
This bit is Switch thermal table by body detection status.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I37b3a0d8f6546361c8d5501e98e3e1b0d814fce3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68077
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit eb76a455cd39ec59b7f2ba28baeec9538befd59e
and applies minor fixes to make it build again.
PARALLEL_MP was working prior to board removal and no
relevant SMI handlers were implemented. So NO_SMM choice
is now selected.
Change-Id: Ia1cd02278240d1b5d006fb2a7730d3d86390f85b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These symbols and codepaths are unused now so drop them.
Change-Id: I7c46c36390f116f8f8920c06e539075e60c7118c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69361
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of including pci_int_defs.asl in each board's DSDT, include it
in the common soc.asl. This moves the PRQM OperationRegion and the PRQI
IndexField defined in pci_int_defs.asl into the \_SB scope, but those
are defined inside the \_SB scope both in the Picasso reference code and
for the AMD SoCs from Cezanne on.
TEST=Both Linux and Windows still boot and don't show ACPI errors on
Mandolin after moving this inside the \_SB scope
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e7bfb15de184cc43cd17c8249be0f59405793f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
This aligns Picasso more with the newer AMD SoCs and also makes it a bit
clearer what this file does. Also remove the unneeded tabs at the
beginning of each line.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie6e5ee815e4346004bc864a6111a255dc689eae8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
Change-Id: I955274bc6bda587201f130762c0735c36f5501d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69289
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with clang on prodrive/hermes: Boots to payload
Change-Id: I66392bcb4ed94c97dde43342dd29dab15d1dd9ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69234
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang warns on both the declaration and the definction.
Change-Id: I94d979fcdbe41349c59248656066615bffd215b6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Expression after a case statement are not allowed.
This fixes building with clang.
Change-Id: Ie369454f10b515aa5601a5e78330e12f4b7a5e4c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I2a6947c1a39b115a7c7f5da1c9becfd51f45fad9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69239
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was never tested with SSE enabled. Now qemu enables it and
FX_SAVE encroaches on the save states. Without SSE enabled the handler
just happened to be aligned downwards enough to have the save states
fit. With SSE enabled that's not the case. The proper fix is to give the
code setting up stubs the right base address, which is the same as for
the TSEG codepath.
Change-Id: I45355efb274c6ddd09a6fb57743d2f6a5b53d209
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69233
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Provide timing parameter for SSDT generation to achieve the requested
100 kHz speed with a high accuracy.
Test: Measure I2C bus clock, high and low times during I2C access from
Linux and confirm they match the specification.
Change-Id: Ifb6019421b612133b8f25c076519bc0e7200dad8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In Linux, the I2C speed defaults to 400 kHz if there is no device
registered in ACPI which requests a different speed. Due to board
limitations (layout, bus load), 400 kHz are too fast which results in a
timing violation. Therefore, add a dummy I2C device to both used I2C
buses (I2C1 and I2C2) with a speed of 100 kHz. This will limit the bus
speed in Linux accordingly.
Change-Id: I507c53c9ec7f763cef18903609231b1a66ed98fa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
According to measurements Elkhart Lake seems to drive the internal I2C
controllers with 100 MHz instead of the common 133 MHz. The datasheet
itself is quite vague on this definition, just one place mentions that
it is 100 MHz (register description for offset 0x94).
This patch changes the I2C controller base frequency to 100 MHz. The
verification was done by measuring the set up resulting I2C clock for
both 100 and 400 kHz.
Change-Id: I7c826bbb01b53e3661746e49f25441565068d1c2
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There are SoCs (for instance Intel Elkhart Lake) that do use 100 MHz as
the base clock for I2C controllers. To support them properly add a
frequency setting for 100 MHz to the designware I2C controller driver.
Change-Id: I9ea11c6a41fd3758b771a416251e108cbe722769
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add wifi sar table for craask/craaskbowl.
Use fw_config to separate different project settings.
BUG=b:247652032,b:251287099,b:251287101
Test=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I5c92f0ab53ece12a97068f09241e5298909116aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
On certain mainboards due to hardware design limitations, certain SPI
Read Modes eg. (Dual I/O 1-2-2) cannot be supported. Add ability to
override SPI read modes in boards which do not have hardware
limitations. Currently there is an API to override SPI fast speeds.
Update this API for mainboards to override SPI read mode as well.
BUG=b:225213679
TEST=Build and boot to OS in Skyrim. Observe a boot time improvement of
~25 ms with 100 MHz SPI speeds.
Before:
11:start of bootblock 688,046
14:finished loading romstage 30,865
16:FSP-M finished LZMA decompress (ignore for x86) 91,049
Total Time: 1,972,625
After:
11:start of bootblock 667,642
14:finished loading romstage 29,798
16:FSP-M finished LZMA decompress (ignore for x86) 87,743
Total Time: 1,943,924
Change-Id: I160b56f6201a798ce59e977ca40301e23ab63805
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add new ram_id:0 (0000) for memory part H9JCNNNCP3MLYR-N6E.
DRAM Part Name ID to assign
H9JCNNNCP3MLYR-N6E 0 (0000)
BUG=b:257867226
TEST=Use part_id_gen to generate related settings and
emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: If663afbcd2e0457636f4a1c7475f1e3e40f0dd96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
SX9324 driver is updated per Linux's documentation found at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
Supporting logic for the deprecated SX932x driver is hence guarded by
DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
This patch by itself does not introduce functional changes to any board.
The legacy SX932x Linux driver never reached upstream Linux and is only
available in ChromeOS kernel fork of 4.4 and 5.4. Linux later accepted
a different implementation named SX9324 and has been available since
5.4. Ideally all variants should adopt the new driver; however, during
the transition phase, coreboot must support both drivers. It is better
to have a single firmware build that can work with both Linux kernel
drivers by specifying both sets of properties. Legacy driver support
should be deleted once all variants finish migration.
BUG=b:242662878
TEST=Dump ACPI SSDT then verify _DSD entries related to the legacy
SX932x driver are identical w/ and w/o this patch
(Tested on Craask and Nivviks)
Change-Id: I42cd6841c3a270c242ed2e739db245e858eadb3b
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69192
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add Fingerprint SPI, and power-off FPMCU during romstage.
For reference see CL:66915 for a similar change to Brya's power sequence
SHA: 2b523ce6316e5c5ec86fe812d739fe48ca81d83d ("Invoke power cycle of
FPMCU on startup")
TEST=Tested on Rex - setup and logged in using fingerprint
Change-Id: I4e6be24e72a8232ae2c958a01cf8ea9a272d7365
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66992
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Handle the possible memory leak scenario.
Foundby=klocwork
BUG=NONE
TEST=Boot to OS on Nivviks
Change-Id: I01c4643d1e671d9bd9971ac6db8031634fffd61e
Signed-off-by: Shaik Shahina <shahina.shaik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69220
Reviewed-by: Shahina Shaik <shahina.shaik@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
These functions are added for ramstage:
* add IPMI OEM command to get board configuration.
* add function to get blade index in the sled.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I85ec7ba68d580c13e368e7d656dba47ea043d33e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68779
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig SOC_RAS_BMS_SEL and corresponding support for
generating PCIe error SEL records and sending them to BMC.
Add PCIe error definitions.
This is needed for SMM, so build the ipmi kcs driver in SMM.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I1ee46c8da7dbccbe1e2cc00bfe62e5df2f072d65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68758
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
