summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-01drivers/spi/winbond: Fix read protection bitsPatrick Rudolph
Don't care about SRPx and print correct protected range. Change-Id: I051f1459c585a7ed6a4878dc217d11df5ef00d74 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-01soc/intel/fsp_broadwell_de: Fix IA32_MC0_* namesElyes HAOUAS
Regarding the SDMs, IA32_MC0_STATUS register is at 0x401, and IA32_MC0_CTL is at 0x400. So replace MSR at (0x400+1) by IA32_MC0_STATUS and the one at 0x400 by IA32_MC0_CTL. Change-Id: I3f53c80f39078bd0c47c25013657e1169fc6c4a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-01siemens/mc_apl1: Activate clock spreading for PTN3460Mario Scheithauer
In order to minimize Electromagnetic Interference (EMI) on the LVDS interface driven by PTN3460, clock spreading must be activated for mc_apl1 mainboard. The modulation ratio is set to 1 % of the nominal frequency. Change-Id: Ie457fcdbb6239dc0b25e2c35ad7a310ee80383f9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28761 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-30Documentation: Add basic flashing tutorial for LenovoPatrick Rudolph
* Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-30Documentation: Describe recommonmark's auto_toc_treePatrick Rudolph
Explain recommonmark's auto_toc_tree and give an example to make writing documentation easier. Show an example what happens if the document isn't included in any toctree. Change-Id: I4938d8d292ea890caec6d396b4fa04da65e398f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-30Documentation: Disable auto_doc_refTom Hiller
According to recommonmark's documentation the enable_auto_doc_ref is deprecated. This is not true, as it's broken with Sphinx 1.6+ commit 12d639873953847de31ec99742b42e50e89ed58c. recommonmark bug report is here: https://github.com/rtfd/recommonmark/issues/73 Instead of using this feature, which doesn't support top level directories in the relative document path anyway, use the TOC tree or inline RST code. Disable auto_doc_ref and document how to reference documents. Change-Id: I9319985b504c4215c33ebbeb9c38317b9efcb283 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-30Documentation: add description for util/pmh7toolEvgeny Zinoviev
Change-Id: Iab5daf101a9ff27aa49b7849bf6bf39362b8db09 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-30mainboard/opencellular/elgon: Add mainboard supportPhilipp Deppenwiese
Tested on Elgon EVT board and boots into GNU/Linux. TODO: * Add hard reset function for VBOOT. * Add EC code * Add SPI flash write protection Change-Id: I9b809306cc48facbade5dc63846c4532b397e0b5 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-30soc/cavium/cn81xx/spi: Add function to return SPI clockPatrick Rudolph
Change-Id: I07c95b9ea14d47da0497470487fa3f162f8012c8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-28amd/stoneyridge: Make gnvs ASL whitespace consistentMarshall Dawson
The globalnvs.asl file had become mixed with tabs and spaces to align columns. Use all tabs to align the comments. BUG=b:BUG=b:77602074 Change-Id: Ife4cf86372a8e24e78b38cca0254dd9fa00dd6b0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-28mb/lenovo/t400: Add 154WX5-TLB2 to display backlight PWM freq listArthur Heymans
Vendor VBT on ThinkPad R500 intends to set a 220MHz backlight PWM frequency which seems to work well. Change-Id: Ic1a12c7e3173468561ed5615319962d0abc6d61b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-28mb/lenovo/t400: Link the gpio.c settingsArthur Heymans
Linking this file instead of including a header makes it possible to easily change gpio settings for a variant. Change-Id: Ifd496510d4868f5901a9dbbf7f1523ccffaf15ab Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28628 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28mb/lenovo/t400: Trim down the gpio.h fileArthur Heymans
Some settings like direction are only used if the mode is GPIO. Change-Id: I4efc54dfef3721b528b90d49f490014d9132cdf8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28627 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28vendorcode/amd/pi/00670F00/Lib: Remove folderRichard Spiegel
Now that the last dependency was resolved, remove AmdLib folder. BUG=b:112525011 TEST=Build and boot grunt. Change-Id: Ibd9a20bc358742520138b9b01f76d7fd2fac92ab Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28742 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28soc/amd/stoneyridge/BiosCallOuts: Remove #include <AmdLib.h>Richard Spiegel
In preparation to remove AmdLib, remove reference to AmdLib.h in soc/amd/stoneyridge/BiosCallOuts. BUG=b:112525011 TEST=Buildgrunt. Change-Id: If80eb64fb736ff26ab226a16b583c8b1c29831f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28741 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28src/mb/asrock/g41c-gs: Add variant g41m-s3Angel Pons
This board is pretty much like the G41M-GS, but with DDR3 memory instead. The PCB layout is almost identical. What works: - S3/S4 resume - RAM init - Booting to Debian - Display lights up w/ libgfxinit - Both PS/2 work - Ethernet - Graphics card on PEG - USB - SATA ports - NVRAM debug_level - Internal flashing - PCI slots (tested with CT4810 audio card) - fancontrol (Only CPU fan can be regulated) - Audio (Rear ports only) What does not work: - Hell knows what might be wrong What is not tested: - PCIe x1 - IDE - Floppy - Parallel port Change-Id: I66b216af740680c390ea82e4fe07737c20227cc6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-28soc/intel/cannonlake: Fix ACPI FADT table generationDuncan Laurie
The function to fill out the FADT table exits early if the devicetree config option to disable the legacy timer is set. This means it never gets to the later check for s0ix config option and so the flag to indicate that it supports low-power idle in S0 is not set. Change-Id: Ia0416f21b6445f6feecb6f0301d48fdf2522b8a6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28755 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28mb/intel/coffeelake_rvp: Enable GbE supportLijian Zhao
Enable Gigabit Ethernet network controller on whiskey lake rvp platform, add NVM bin file as well. BUG=N/A TEST=Build and boot up into chromeos on whiskey lake rvp platform, and check eth0 can get IP address assigned, Change-Id: Ia299a2aa78108175074e084cc34a7d2b38cf1c72 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27848 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28soc/intel/cannonlake: Move SkipMpInit config to FSPMLijian Zhao
SkipMpInit UPD had ben moved from Fsp SiliconInit UPD to Fsp MemoryInit UPD, hence change the settings in coreboot side as well. The old options in SiliconInit get deprecated, so leave the code as is will be harmless. Make the changes limited to coffeelake itself. Change-Id: If968de78117068668e4f0006c412442c50658ba9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28740 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28soc/amd/common/block/pi: Remove references to AmdLibRichard Spiegel
In preparation to remove AmdLib, remove all references to AmdLib.h in folder common/block/pi. BUG=b:112525011 TEST=Buildgrunt. Change-Id: I3530857b872d0cb5ed2e3f3a294cc50b45ff6969 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28737 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28soc/intel/cannonlake: Add ACPI entry for LANLijian Zhao
Add ACPI DSDT entry for integrated Gigabit LAN controller. Change-Id: I15bf1d4065894531871380b3318f553b637f4a97 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28743 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28Documentation/lib/payloads/fit.md: Consistently indent with tabsJonathan Neuschäfer
Sphinx displays a tab as four spaces, which makes code indented with eight spaces per level stand out. Format the example configuration file in fit.md consistently with tabs to make it look consistent everywhere. Change-Id: Ia1d4c44e68e5267bac1f0f558421c6a0c7a9329c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-28mainboard/google/poppy/variants/rammus: Modify VR settingstatham_chu
We refer to Intel Doc#594883. The recommended Ac/Dc loadline values are as below: # VR Settings Configuration for 4 Domains #+----------------+-------+-------+-------+-------+ #| Domain/Setting | SA | IA | GTUS | GTS | #+----------------+-------+-------+-------+-------+ #| Psi1Threshold | 20A | 20A | 20A | 20A | #| Psi2Threshold | 2A | 2A | 2A | 2A | #| Psi3Threshold | 1A | 1A | 1A | 1A | #| Psi3Enable | 1 | 1 | 1 | 1 | #| Psi4Enable | 1 | 1 | 1 | 1 | #| ImonSlope | 0 | 0 | 0 | 0 | #| ImonOffset | 0 | 0 | 0 | 0 | #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | #| AcLoadline | 14.4 | 4.2 | 5.7 | 4.47 | #| DcLoadline | 14.0 | 4.17 | 4.2 | 4.3 | #+----------------+-------+-------+-------+-------+ BUG=b:112167318 BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: I2d83d835ec841ac4cc811a0a69f74d203d5ea173 Signed-off-by: statham_chu <statham_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28soc/intel/cannonlake: Update UPD from device switchLijian Zhao
Some of the FSP silicon UPD entry can be updated base on device switch in pci device tree, have both static config setting and device tree "on" and "off" will be redundant. BUG=N/A TEST=Build and boot up fine with Whiskey Lake RVP platform. Change-Id: Ia36cfab03c4613786e5580a039d89007b630adf9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27766 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28payloads/tianocore: ignore whitespace change when applying patchesPiotr Król
This change is required to apply patch 06_CorebootPayloadPkg_keep_cb_table since conflict in white space between patch and target file in edk2 makes patch rejected while building under coreboot-sdk:1.52. Change-Id: I38f7d46925cc00a2b5c5400e3fbf3579990f3fa5 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-09-27siemens/mc_apl1: Add new mainboard variant mc_apl2Mario Scheithauer
This mainboard is based on mc_apl1. In a first step, it contains a copy of mc_apl1 directory with minimum changes. Special adaptations for mc_apl2 mainboard will follow in separate commits. Change-Id: I0af60ab0dfe556dd95da2cf1a49c685a8f0ae4eb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-27siemens/mc_apl1: Make the DDR memory swizzle data configurableMario Scheithauer
In preparation for a future MC Apollo Lake board which will be equipped with LPDDR4 modules, it is necessary to make the swizzle data configurable. Starting from the mc_apl1 baseboard, which is equipped with DDR3L memory and therefore does not need swizzle data, the structures are initialized with zero. Change-Id: I4954d0a00d1d5fc28a8dda45a9fb27f98d5c3f1e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-09-26mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum valueSumeet Pawnikar
Increase power limit1 maximum value from 5W to 7W. This value as per recent measurement on closed system which shows better performance results. BUG=None TEST=Build and tested on Nocturne system. Performance tests show better results. Change-Id: I7485b1d2afde46ec28d548c13be35a43e7572918 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-26mb/google/poppy/variants/nocturne: Add tdp_pl1_override valueSumeet Pawnikar
Add tdp_pl1_override value as 7W. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board Change-Id: I16d3894da68bc3be6eff526062f9a88ef2df60c7 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
2018-09-26mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
The previous does not work well enough when testing with high ambient temperature. Update DPTF settings to make it work better. List of tweaks: 1. Raise DRAM Critical temperature from 48C to 55C Note that there are mechanisms in EC that complement this because of DPTF limitation that we can't have multiple passive temperatures. 2. Lower response time for DRAM temp sensor from 60s to 5s. 3. Increase throttle priority to the charger when DRAM hit passive temperature from 100 to 200. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: Idf7efa76b2c6085cf97aa9f65c6ce066e8cff99a Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28738 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26soc/sifive/fu540: Document #if ENV_ROMSTAGE lineJonathan Neuschäfer
Change-Id: Idcd72c558e46637b1b99e9613963436fedd4a8b9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28699 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26soc/sifive/fu540: Remove PLL parameters from sdram.cJonathan Neuschäfer
These parameters are not used and not necessary in sdram.c, because the DDR PLL is configured in clock.c. Change-Id: I8060bd21e05765cedf7bdabc28052c32774f9ca1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28710 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26arch/riscv: Advance the PC after handling misaligned load/storeJonathan Neuschäfer
After emulating an instruction in the misaligned load/store handler, we need to increment the program counter by the size of instruction. Otherwise the same instruction is executed (and emulated) again and again. While were at it: Also return early in the unlikely case that the faulting instruction is not 16 or 32 bits long, and be more explicit about the return values of fetch_*bit_instruction. Tested by Philipp Hug, using the linuxcheck payload. Fixes: cda59b56ba ("riscv: update misaligned memory access exception handling") Change-Id: Ie2dc0083835809971143cd6ab89fe4f7acd2a845 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-26Documentation: Remove Kconfig.tex and related infrastructureJonathan Neuschäfer
This part of our documentation has bitrotted for a long time. Any remaining information should ideally be moved to Documentation/getting_started/kconfig.md. Change-Id: I3920d002813c2838285446dc0ed8dacfa5364581 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28665 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26vendorcode/amd/pi/00670F00/Proc/PspBaseLib: Remove folderRichard Spiegel
Now that PspBaseLib is no longer used, fully remove the folder. BUG=b:116579642 TEST=Build grunt Change-Id: I441b3f46e2312c12771766f87b25d1dc15ff3af0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-09-26payloads/Kconfig: do not show compression menu for FITAndrea Barberio
FIT payloads do not support compression. Currently this would thrown an error like the following: E: FIT images don't support whole-image compression, compress the kernel component instead! With this patch, menuconfig will correctly *not* show payload compression for FIT payloads, and this will correctly set compression to NONE. Change-Id: If564e2f5c0d499bc30411d7bd41611790453d4ef Signed-off-by: Andrea Barberio <insomniac@slackware.it> Reviewed-on: https://review.coreboot.org/28732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-26cheza: Wrap FMAP sections with calibration data in RO_PRESERVE sectionJulius Werner
The Cheza board contains a couple of non-standard FMAP sections that contain per-board calibration data. When flashing new firmware to the board, care should be taken to copy these sections over so that all features can still function correctly afterwards. This patch wraps a new RO_PRESERVE FMAP section around these sections to make them easier to preserve as a group. Change-Id: I77919336f609a1be399598736f46921c3da99e68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: T Michael Turney <mturney@codeaurora.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-09-26src/mainboard/pcengines/apu2/Kconfig: Clean up PINMUX settingsMichał Żygowski
Configuration of pins exposed by superIO are inconsistent between board variants. Each platform should have UARTs enabled, this is expected behaviour of these pins. Given that APU2_PINMUX_UART_x can be set for all boards as default. Change-Id: Ifb7dfe23a95ba0e572adc38212333d9fdd234d53 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/28720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-26cpu/intel/model_206ax: detect number of MCE banksDan Elkouby
My CPU (3770k) supports 9 MCE banks, but the code is hardcoded to reset only 7. This causes Linux to spuriously log errors during boot and S3 resume. Fix this by reading the real value from the right MSR. Change-Id: Id05645009259fd77b4de49bde518361eeae46617 Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-on: https://review.coreboot.org/28443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-26mb/lowrisc: Remove the Nexys4DDR portJonathan Neuschäfer
This board doesn't support the newest RISC-V Privileged Architecture spec (1.10), and it's based on an FPGA so it's a moving target. Now that there's actual RISC-V silicon out there (from SiFive), mb/lowrisc/nexys4ddr will only continue to bitrot. Change-Id: I4e3e715106a1a94381a563dc4a56781c35883c2d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-26src/mainboard/pcengines/apu2/Kconfig: Remove TPM1 optionMichał Żygowski
Apu2 boards use Infineon SLB9665 TT 2.0 module which is TPM2.0. Remove TPM1 option to allow choice between TPM1 and TPM2. SLB9665 TT 2.0 detection fixed in change 21983. Change-Id: Ie9788c43d8b32b2f6329a072b88c962c34eca119 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/28000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-26soc/intel/common/block: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Id82059898844fbe20665250062b67652d6cc1f9e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
Need to tune I2C bus 6 clock frequency under the 400KHz Bug=b:116543001 TEST=flash coreboot to the DUT and measure I2C bus 6 clock frequency whether arrive to 399.1KHz Change-Id: I95b535a6b429fc34961a4953004a1c51e53a9be6 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28747 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold"Seunghwan Kim
This reverts commit aef592d9b66aa18d83b0a211ead26013ff1f7d98. Reason for revert: Use values from driver instead of hardcoding in firmware (b:113303916) Change-Id: I02d21803f38da227f1d85b00cb6b5274d81dbbb4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28690 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
Since I2C bus 7 attached the touchscreen device however Phaser units that haven't it. So for avoiding side effects, we need close I2C bus 7 SCL and SDA respectively. BUG=none TEST=according to sku_id (Phaser: 0x1, Phaser360: 0x2, Phaser360s: 0x3) distinguish whether close these gpios. Change-Id: I8ad17761f2a053dc329bbec0a0a3284d47289666 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28669 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jett Rink <jettrink@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-25mainboard/google/kahlee: Only read a single vendor from oem.binMartin Roth
Since each variant has a separate build, we don't need to support multiple manufacturers in a single file. BUG=b:79874904 TEST=Build, boot, see updated mainboard manufacturer Change-Id: I0ccf207ba8d5e5200aa4b19c46784bbda82f7b6e Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-09-25mb/google/kahlee/variants/liara: Disable NbP-state on LiaraAmanda Huang
To disable NB-Pstate, the system wouldn't auto restart on EVT board when idling. BUG=b:116082728 Change-Id: Iec4f0355cb6eb1c2b0372e3d131cc5e6ba36635e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-25src/cpu/via/nano: Remove unneeded includeElyes HAOUAS
Change-Id: I656b11add77012271ccc0c80dfcf97d20937dba2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-25northbridge: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: Ib70eb33fac654a773ea39a5fd4206435dffdabb7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-25mb: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: I3a8e077656df02912b4e67c3947bd5af054a18bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-25mb/asrock/g41m_vs3_r2: Add mainboardArthur Heymans
The following was tested: - CPUs with 800, 1067, 1333MHz FSB (1333MHz FSB needs a jumper set) - The VGA output with libgfxinit - USB - COM1 - Ethernet - SATA - PCIe - PCI Has the following problems: - The Ethernet NIC is not usable after S3 resume and requires Linux to reload the driver. Vendor firmware also has this problem so it is quite likely it is just a atl1c driver problem. TODO: Add documentation Change-Id: Ibce9ecdc0e44db3703401f116c9a8bff5b66437f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-24amd/common/psp: Remove use of PspBaseLibCharles Marslett
Eliminate the references to PspBaseLib.c and PspBaseLib.h in agesa_headers.h. Fix psp.c references to definitions in those files by adding them to include/amdblocks/psp.h. BUG=b:78514564 TEST=Build and boot grunt/ChromeOS and restore an image from the internet. Change-Id: I2740ceb945736c6e413f7d0bd0c41a19e19c7d5a Signed-off-by: Charles Marslett <charles.marslett@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27619 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-24soc/amd/stoneyridge/romstage.c: Move STAPM code to SOC specificRichard Spiegel
STAPM programming was created inside function OemCustomizeInitEarly(). It should be SOC specific, and called by agesawrapper just before the call to OemCustomizeInitEarly(). BUG=b:116196626 TEST=build and boot grunt Change-Id: I8a2e51abda11a9d60a9057b38f2a484e1c8c9047 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28705 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-22skylake,kabylake: Add support to set eMMC tuning param from dev treePratik Prajapati
Add support to set eMMC tuning params from the device tree so that it can be configured per board. BUG=b:112718426,b:112690628 BRANCH=none TEST=Build nocturne image and checked values passed in dev tree is set by FSP. Change-Id: Ic71934dce9a1c380a057e579ca3fda41983b9385 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/28274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
This commit creates an ampton variant for Octopus. The initial settings are copied from Bip, but the following changes are made to support hardware differences: * GPIO_66 is not connected (LTE). * GPIO_67 is not connected (LTE). * Updated comment for GPIO_134 (EC_AP_INT_ODL), but not configured yet. * GPIO_143 is not connected. * GPIO_144, GPIO_145 mapped to PEN_EJECT are not connected. * EN_PP3300_TOUCHSCREEN moved from GPIO_213 to GPIO_146. * GPIO_213 is not connected. * GPIO_214 is not connected. BUG=b:111498206 TEST=None Change-Id: I7d6cf19c906df19115b1101e3d91c62f5f3f61e3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/28663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-21mb/intel/coffeelake_rvp: Add whiskey lake rvpLijian Zhao
Add new mainboard variant of whiskey lake rvp, which is primary validation platform for whiskey lake silicon, support socket DDR4 memory module. BUG=N/A TEST=Build and flash, confirm boot up into kernel on whiskey lake rvp platform. Change-Id: I4a5e8a9ec76d5e55e55ef9bf968825c17fbe9816 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-21mb/google/poppy/variants/rammus: Disable command TriState for rammusmarxwang
This patch sets the MRC UPD "CmdTriStateDis" to disable TriState for the rammus boards. Rammus is LPDDR3 design without RTT for CMD/CTRL. BUG=none TEST=Run memtester app and also webgl fishtank on the LPDDR3 kabylake boards and also check the margin data is proper in FSP. Change-Id: Iee115f49ba5b36dc5b0425e9da02b58cd19b2236 Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28568 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/intel/coffeelake_rvp: Correct LPDDR4 to DDR4 in mainboard infoLijian Zhao
There's only DDR4 or LPDDR3 support for coffelake processor line, details can be found out on EDS #570805. BUG=N/A TEST=N/A Change-Id: I8ba6b6861b15b40b01237f87c8d55394f7fd6706 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-21mb/intel/coffeelake_rvp: GPIO support for whiskey boardLijian Zhao
Add gpio programming difference for whiskeylake rvp platform. BUG=N/A TEST=N/A Change-Id: I35a0384f828fd3219e0c3adb4830f5bdab800e32 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28367 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21soc/intel/denverton_ns/csme_ie_kt.c: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I9dde92314af8ef87a5acb550f0fb25b8ce875174 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-21soc/intel/braswell/ramstage.c: Add SoC stepping D-1 supportFrans Hendriks
No support for SoC D-1 stepping is available. According to Intel doc #332095-015 stepping C-0 has revision id 0x21 and D-1 revision ID 0x35. Also correct the RID_C_STEPPING_START value for C-0. BUG=none TEST=Built, Intel Cherry Hill Rev F. Change-Id: I29268f797f68aa4e3b6203e098485e0bd4a44fc4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/27471 Reviewed-by: Wim Vervoorn Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21sb/intel/bd82x6x: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I4909ebffc978f537bbf6269d9e27dbaca43daa10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-21soc/intel/quark/uart.c: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ia50aa96901b979b947fd4d269b077814c06f60c6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28677 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21arch/{mips,power8}/include/arch: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I8790bc333caa367ef46bf80b5fecc3e90ef89ca0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-21include/device/pnp.h: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I9364c9681dd89f09480368a997f6d1f04cde1488 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-21Documentation: fix sphinx warningsTom Hiller
Fix warning from list in table cells for nri_registers.md Change-Id: I2b77ad266d1c5f693536e161f96f3db19832989c Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/28354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-09-21nb/via/vx900: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I70dcefd5bc9864931f66bece1f044f806f5d7ae0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-21soc/intel/skylake: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ifd1471a9cd76d2cea72262ed81b7071f31f7b375 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-21soc/broadwell: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ifdf3d1870500812a417eaa5e93fcc168629c094f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-21arch/riscv/include/arch: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: If52de0d87b02419090b29a7cf1952905d3f975f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28691 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21soc/intel/skylake: Include some microcode blobsArthur Heymans
This included the microcode for some CPUID's found in soc/intel/skylake/bootblock/report_platform.c (others are likely pre-release SKU's) The amount of FIT entries needed is currently 7 so setting CPU_INTEL_NUM_FIT_ENTRIES is set to a safe 10 will be able to fit them all. Change-Id: I3ba504a07b2697fe55ff8f28a934f761ae05a4ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
Set up EC_IN_RW GPIO to boot depthcharge. Without this patch, depthcharge will fail to tell if the EC firmware is RW. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC_IN_RW GPIO. Change-Id: Icb39d663f65b72e0ad54059c9590d9693106ee25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28670 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
Change GPP_D17 and GPP_D18 to no connects as DMIC was moved to DMIC0. BUG=b:113744731,b:111106010 TEST=none Change-Id: I8ef42627e542182707c81389af9da33a114bc184 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28689 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mainboard/google/kahlee: allow oem.bin file to update smbiosMartin Roth
Grunt variants need a way to customize the mainboard vendor based on the platform. For future boards, this can probably be done via CBI, but grunt doesn't support that method. BUG=b:79874904 TEST=Build, boot, see updated mainboard vendor Change-Id: I997dc39c7f36f70cf4320ef335831245889eb475 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@google.com>
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
Update Power Limit1 and Power Limit2 values along with stepsize. Correct the charger effect for Temperature sensor2. BUG=b:112448519 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I01e0a94fe694537d9eebe3b92c11d0c83137d716 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28530 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21soc/intel/cannonlake: Correct ITSS port id.praveen hodagatta pranesh
According to cannon lake PCH BIOS specification document #570374 target port id for interrupt and timer subsystem(ITSS) is C4 instead of C2. BUG=None TEST=None Change-Id: I9f8783c682d2c4c4a86e1c9cf4b9c27a18fdf494 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kin Wai Ng <nelsonaquik@gmail.com>
2018-09-20mb/lenovo/{T500, R400, W500}: Unify variants under T400Arthur Heymans
A negative side-effect is that those boards disappear from the board-status output, but this is an issue on all variants. Change-Id: Ic80804dc1f7d9c6f83ceee3db667019532c31d4c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20soc/intel/cannonlake: Remove const for spd_smbus_addressLijian Zhao
Remove const define for spd_smbus_address, the value can be updated depends on platform configuration. TEST=Build and Run on Whiskey Lake rvp platform. Found-by: Converity Scan #1395725 Change-Id: Ib933ed872e9f85087bb3cd76a1f1e29cca75cd54 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28664 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20soc/amd/stoneyridge/romstage.c: Remove obsolete commentRichard Spiegel
When preparing transition of AGESA calls to romstage, I placed a comment indicating the place to move a particular call. Now that the AGESA call has been moved to romstage, the comment became obsolete. BUG=b:116095766 TEST=none. Change-Id: I2811657385ab088747e32d4c66b99fdd01e7315e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-09-20src/vendorcode/amd/agesa: Improve formatting of some f12 and f14 microcodesMike Banon
It is much more convenient to view these files if there are 8 values per line, not 1 value which results in a very long file. The contents remain the same: these microcodes are still the latest publicly available at the time of writing. Change-Id: I3e5296a5b5e895702a60aca1ded7418bb345263d Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28391 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20src/vendorcode/amd/agesa/f12: Update microcode to version 0x3000027 2011-09-13Mike Banon
This microcode update for CPU ID 0x300F10 should improve the system stability. It is a part of microcode_amd.bin officially released by AMD at linux-firmware: it starts at 0x217C offset, and size is 0x03C0 as specified priorly at 0x2178. Old version: 0x300000F [2010-04-10] replaced by New version: 0x3000027 [2011-09-13] Change-Id: I9650fab377d957904318ebb393323c2509cfea26 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28378 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/zoombini: Use Chrome EC BOARDID definitionKarthikeyan Ramasubramanian
The board_id() definition is the duplicate of chrome EC board_id definition. Remove the duplicate definition and select EC_GOOGLE_CHROMEEC_BOARDID Kconfig item. BUG=b:114001972,b:114677884,b:114677887 Change-Id: Id8b7027d653649e8e5791e455652c4e893a746c2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Tested-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Reviewed-on: https://review.coreboot.org/28609 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
Update DPTF settings based on recommendation from thermal team. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: I26f09392a3293ce4b3481f2be341a667d606bc10 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28666 Reviewed-by: Todd Broch <tbroch@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meepWisley Chen
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 1 for EVT. BUG=b:115965629 TEST=verified it in meep proto board which rework ram id. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I962b099d5b9fbe0ca29708be1e9c6ed60b10d363 Reviewed-on: https://review.coreboot.org/28658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-09-20nb/amd/pi/00730F01: use MMIO and performance counters from AGESAPiotr Król
This patch contain minimal set of changes to initial IVRS implementation to make it work reliably. Code in this patch was tested with Xen 4.8 and Debian 4.14.y - this software stack survived 100x reboots without any hang on PC Engines apu2c4. Previously using IVRS provided by AGESA lead to 29/100 hangs. MMIO base shall not be hard coded since this value depends on platform design. Performance counters were selected experimentally, since lack of them cause 4.14.y panic: [ 1.064229] AMD-Vi: IOMMU performance counters supported [ 1.069579] BUG: unable to handle kernel paging request at ffffaffc4065c000 [ 1.073554] IP: iommu_go_to_state+0xf8a/0x1260 [ 1.073554] PGD 12a11f067 P4D 12a11f067 PUD 12a120067 PMD 129b69067 PTE 0 [ 1.073554] Oops: 0000 [#1] SMP NOPTI [ 1.073554] Modules linked in: [ 1.073554] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.50 #13 [ 1.073554] Hardware name: PC Engines apu2/apu2, BIOS 4.8-1174-gf12b3046f0-d2 [ 1.073554] task: ffff8d5d69b9f040 task.stack: ffffaffc40648000 [ 1.073554] RIP: 0010:iommu_go_to_state+0xf8a/0x1260 [ 1.073554] RSP: 0018:ffffaffc4064be28 EFLAGS: 00010282 [ 1.073554] RAX: ffffaffc40658000 RBX: ffff8d5d69bae000 RCX: ffffffff99e57b88 [ 1.073554] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000246 [ 1.073554] RBP: 0000000000000040 R08: 0000000000000001 R09: 0000000000000170 [ 1.073554] R10: 0000000000000000 R11: ffffffff9a435e2d R12: 0000000000000000 [ 1.073554] R13: ffffffff9a29a830 R14: 0000000000000000 R15: 0000000000000000 [ 1.073554] FS: 0000000000000000(0000) GS:ffff8d5d6ec80000(0000) knlGS:00000 [ 1.073554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.073554] CR2: ffffaffc4065c000 CR3: 000000010fa0a000 CR4: 00000000000406e0 [ 1.073554] Call Trace: [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] amd_iommu_init+0x11/0x89 [ 1.073554] pci_iommu_init+0x16/0x3f [ 1.073554] ? e820__memblock_setup+0x60/0x60 [ 1.073554] do_one_initcall+0x51/0x190 [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] kernel_init_freeable+0x16b/0x1ec [ 1.073554] ? rest_init+0xb0/0xb0 [ 1.073554] kernel_init+0xa/0xf7 [ 1.073554] ret_from_fork+0x22/0x40 [ 1.073554] Code: d2 31 f6 48 89 df e8 d8 15 02 ff 85 c0 75 d1 48 8b 44 24 2 [ 1.073554] RIP: iommu_go_to_state+0xf8a/0x1260 RSP: ffffaffc4064be28 [ 1.073554] CR2: ffffaffc4065c000 [ 1.073554] ---[ end trace 44588f98aa7c7c0b ]--- [ 1.255973] Kernel panic - not syncing: Attempted to kill init! exitcode=0x09 [ 1.255973] [ 1.259934] ---[ end Kernel panic - not syncing: Attempted to kill init! exi9 Possible future improvements: - compare device entries with values returned by AGESA - enable EFRSup (this is enabled in AGESA) - try various IVHD flags (there is difference between initial implementation and AGESA) Change-Id: I7e3a3d21f295ae96962d7718b9568fc4b67eb23d Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-20soc/intel/fsp_broadwell_de: Add fixed VT-d MMIO range to the resourcesWerner Zeh
FSP initializes the VT-d feature on Broadwell-DE and assigns an address space to the MMIO range. coreboot's resource allocator needs to be aware of this fixed resource as otherwise the address can be assigned to a different PCI device. In this case addresses are overlapped and the VT-d range is not accessible any more. To deal with it the right way add a fixed MMIO resource to the resources list if VT-d BAR is enabled. TEST=Booted into Linux and checked coreboot log for resource assignment. Change-Id: I626ac17420eadc0b49031e850f0f40b3b221a098 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-20fsp_broadwell_de: Move DMAR table generation to corresponding VT-d deviceWerner Zeh
The DMAR table generation depends on the VT-d feature which is implemented in its own PCI device located in PCI:00:05.0 for Broadwell-DE. Add a new PCI driver for this device and move DMAR table generation to this device driver. Change-Id: I103257c73f5e745e996a441a2535b885270bc204 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/28671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-20mb/lenovo: Add libgfxinit support on Lenovo T520Evgeny Zinoviev
Change-Id: I4fcdb7467f1911af722f4c24ce64807079a91340 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-20sb/intel/common/firmware: Ensure warning is put lateNico Huber
Change-Id: I400de0a622c2b45ea5ef1f1446f4f489ac397c32 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28673 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-19amd/stoneyridge: Sync PSP base to MSRMarshall Dawson
According to AMD, there exists an undocumented MSR which must be written with the PSP's base address. Read the value from the PSP's config space and sync each core's copy of the MSR to match. BUG=b:76167350 TEST=boot Grunt and verify "rdrand: disabled" goes away from dmesg Change-Id: I30027d3b0a6fbd540375e96001beb9c25bf3a678 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28608 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-19arch/arm/include/armv7/arch: Remove dead codeElyes HAOUAS
Change-Id: Id3199d130825a5f796108ae45ce965325511ce8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-19src/device/device.c: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I3d1bdefd00c91a98116ede5dc03c3ce253d1f0ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-18mb/asrock/g41c-gs: Link separate gpio.c filesArthur Heymans
With the addition of new boards using macros to set per board settings in the same gpio.c file is getting too complicated so link separate files. Change-Id: I3ab05f1af6ba0a04dd827816b3bcaa506a3f6aff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-09-18mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM valuesRichard Spiegel
AMD has tested careena, and for the time being is recommending a scalar of 68%, power limit of 7.8 W and time constant of 2500. Using new STAPM configuration code, set the desired values. BUG=b:111561217 TEST=none, code was tested with grunt. Change-Id: I42671ab0e66b21dc4f8c8c326c1fa33328b1390e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
While the pin was set to a pull-down, with the external pull-up, this wasn't enough to keep the pin low. Set to output low to drive to 0V. TEST=Boot grunt, verify EMMC_BRIDGE_RST is 0V. BUG=b:115661061 Change-Id: Ife014b8a879274df5d892c1de386976808de1df0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-18mainboard/google/kahlee: Don't set global subsystem IDsMartin Roth
These values override the default subsystem IDs, and aren't needed. BUG=b:113253260 TEST=Boot grunt Change-Id: I3c56534b094ede8d8200b72f4433a891d0094064 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-18util/lint: Ignore "visible if" statement in Kconfig filesPatrick Georgi
They allow reducing the visible set of options to remove clutter. Change-Id: I18c953c7feae23c0752392a2bf8f49783c17310e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-18mainboard/pcengines: select ADD_SEABIOS_SERCON_PORT_FILEMichał Żygowski
PC Engines boards are interfaced mainly via serial console. Enable SeaBIOS serial console for these boards by default when SeaBIOS selected as payload. Change-Id: I9e65dd1e28859028c8c46f28a5442de8c59d4893 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27824 Tested-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 06:08:10 +0000