| Age | Commit message (Collapse) | Author |
|---|
|
Certain RDIMMs have inherently large write levelling delays,
in some cases exceeding 1.5 MEMCLK. When these DIMMs are
utilized, the phase recovery system requires special handling
due to the resultant offset exceeding the phase recovery reporting
capabilities.
Fix an old error where delays > 1.5 MEMCLK were not being programmed
(gross delay high bit was not in set range), and restore special
delay handling for delays greater than 1.5 MEMCLK.
Also enhance debugging for x4 DIMMs around the affected code.
Tested-On: ASUS KGPE-D16
Config-CPU: 1x Opteron 6262HE
Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1
Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14441
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The BKDG requires phy fences to be re-trained after a memory clock change.
Memory training on the ASUS KGPE-D16 and KCMA-D8 somehow "mostly" worked
-- without actually following this requirement -- !
Fix the single typo that caused several weeks of delay in putting
servers with Kingston RAM (and others) into production...
Tested-On: ASUS KGPE-D16
Config-CPU: 1x Opteron 6262HE
Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1
Change-Id: I197e6728d2b0ac8c1535740599459d080b17af33
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14445
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In program_segment_loaded, flush L1D to L2 only if the address of the
loaded segment lies in the CAR region. Add an assert to ensure that
the loaded segment does not cross CAR boundaries.
Change-Id: Ie43e99299ed82f01518c8a1c1fd2bc64747d0c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14449
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fixes two issues:
1. In (the unlikely) case that dev->chip_info is NULL, the output was
depending on an unknown value near the start of the address space.
2. Output for the secondary interface actually printed the primary
interface's configuration.
Change-Id: Id0f499a85e6e2410b4efd63baf7fffb2fcaa3103
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14361
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix warnings:
Unescaped left brace in regex is deprecated, passed through in regex;
marked by <-- HERE in m/\#\s*define.*do\s{ <-- HERE / at util/lint/checkpatch.pl line 3261.
marked by <-- HERE in m/\(.*\){ <-- HERE / at util/lint/checkpatch.pl line 3750.
marked by <-- HERE in m/do{ <-- HERE / at util/lint/checkpatch.pl line 3751.
marked by <-- HERE in m/^\({ <-- HERE / at util/lint/checkpatch.pl line 4194.
Change-Id: If0c1f07a16df9e6cd1c1393a31af8b8ea6a66b01
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14310
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The coding guidelines say that all objects should have fully
qualified types (unsigned int instead of unsigned).
This script finds violations of that rule.
Steps for the filter:
1) Find all lines in the coreboot tree that have the word 'unsigned'
followed by a space.
2) Exclude directories that aren't in the include list or
are specifically excluded.
3) Exclude files that aren't specifically included.
4) Filter out legimitate uses 'unsigned int' or 'unsigned long' for
example.
5) Filter out lines that begin with '/*' or '*'
Change-Id: I46213c6a168e6aafa29a50af814bf7e0fcd32eb6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14269
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Move time functions and prototypes from libpayload.h to time.h.
In a similar manner to other c libary headers, this change makes
porting existing applications to libpayload easier.
Change-Id: I71e27c6dddde6e77e0e9b4d7be7cd5298e03a648
Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com>
Reviewed-on: https://review.coreboot.org/14437
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Idda4b7179e3e7b3f5b70be810b428b0651c1cd67
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When building libpayload, make the build directory and .config outside
libpayload source directory so it'll not pollute the libpayload source
and cause conflicts with other builds.
Change-Id: Idcfbc7dbe4d52a3559229d8450c3efaafd33b93b
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/14389
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to de-duplicate common patterns implement one write_tables()
function. The new write_tables() replaces all the architecture-specific
ones that were largely copied. The callbacks are put in place to
handle any per-architecture requirements.
Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14436
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a architecture specific function, arch_write_tables(), that
allows an architecture to add its required tables for booting.
This callback helps write_tables() to be de-duplicated.
Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A architecture-specific function, named bootmem_arch_add_ranges(),
is added so that each architecture can add entries into the bootmem
memory map. This allows for a common write_tables() implementation
to avoid code duplication.
Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14434
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The x86 architecture needs to add a forwarding table to
the real coreboot table. Provide a helper function to do
this for aligning the architectures on a common
write_tables() implementation.
Change-Id: I9a2875507e6260679874a654ddf97b879222d44e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In addition to being consistent with all other architectures,
all chipsets support cbmem so the low coreboot table path is
stale and never taken. Also it's important to note the memory
written in to that low area of memory wasn't automatically
reserved unless that path was taken. To that end remove
low coreboot table support for x86.
Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There were quite a number of #if/#endif guards in the
write_tables() code. Clean up that function by splitting
up the subcomponents into their own individual functions.
The same ordering and logic is kept maintained.
The changes also benefit the goal of using a common core
write_tables() logic so that other architectures don't
duplicate large swaths of code.
Change-Id: I93f6775d698500f25f72793cbe3fd4eb9d01a20c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14431
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Each arch was calling cbmem_list() in their own write_tables()
function. Consolidate that call and place it in common code
in write_coreboot_table().
Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14430
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of hard coding a #define in each architecture's
tables.c for the coreboot table size in cbmem use a Kconfig
varible. This aids in aligning on a common write_tables()
implementation instead of duplicating the code for each
architecture.
Change-Id: I09c0f56133606ea62e9a9c4c6b9828bc24dcc668
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14429
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Apparently the memo was missed about the write_tables()
signature. Fix the confusion.
Change-Id: I8ef367345dd54584c57e9d5cd8cc3d81ce109fef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14421
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Apparently the memo was missed about the write_tables()
signature. Fix the confusion.
Change-Id: I63924be47d3507d2d7ed006a553414f4ac60d2f9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14420
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set the default memory type in MTRRCap register to 0. This ensures
that even if the MTRR Enable bit is set in MTRRCap register, the
default memory type is still uncacheable.
Change-Id: I63e7993f8b65dabbab60e7c1bb8d6d89ef4da9ee
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14428
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Fix is required to compile AGESA ramstage without raminit.
Change-Id: I783883fa7a12e8a647aa432535bb990a47257e9b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14416
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
|
|
Change-Id: Icc1361fdd3a8369c4b442ce5b8807c549519c93a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14387
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With binutils 2.26 our memlayout ASSERT for mirrored SRAM regions
gets confused due to the lack of parentheses grouping the expressions.
This fixes the following issue:
LINK cbfs/fallback/bootblock.debug
mipsel-elf-ld.bfd: bootblock and gram_bootblock do not match!
mipsel-elf-ld.bfd: romstage and kseg0_romstage do not match!
Change-Id: Ib406e229b8a552d9ffc4538b55ee0269bfed62a8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14440
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Id9487212411e5c237d26eb4e5663135f7d0720d1
Signed-off-by: Noah Glovsky <noah.glovsky@watershedschool.org>
Reviewed-on: https://review.coreboot.org/14425
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ida8e81c88b2016d90cc8305edfb199143f859ec2
Signed-off-by: Noah Glovsky <noah.glovsky@watershedschool.org>
Reviewed-on: https://review.coreboot.org/14422
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
File type for SPD in this soc is defined as CBFS_TYPE_RAW in Makefile,
but CBFS_TYPE_SPD in code.
Causes DDR SPD not to be loaded on memory down.
Tested on Prodrive Technologies Broadwell-D 1548 module:
http://prodrive-technologies.com/amc-ix5-intel-broadwell-de-platform/
Change-Id: I44525b4742b3f93d33f0c5bd9ed642c6fb06f23f
Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com>
Reviewed-on: https://review.coreboot.org/14415
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Change-Id: Ife26f5cf6a06a1a5bf965bbeed7a740a990e8f7f
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14399
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add amenia board files
Change-Id: I6731a348b4c0550d3b9381adb5fb83719f90a5da
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14352
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide trigger option to configure APIC, sci, smi, nmi interrupts.
Change-Id: I1b553fb4ed1b43aba62346f5b758f8d082606510
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14353
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ide3202fca75c77ccebf17d61d93945ba7834a13b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14398
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie38a358ebd2d040ce32b3eeaeb664c568d4dc51e
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/14378
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
* use crossgcc to build nvramcui
* build libpayload dependency
Change-Id: Ife3054aeb03b4da0568ad47f96c633460d6c07ae
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/14377
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Compiling libagesa with -O2 would throws error on these.
Change-Id: I04afa42f0ac76677f859ca72f9df2e128762ad3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14413
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have not really hit this error, due the test on AGESA_UNSUPPORTED
above.
Change-Id: I6e7d136a1bb46138cc347225bc4c82cfeaff385d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We never define B1_IMAGE or B2_IMAGE. These are about building
CIMx as separate binary modules, while coreboot builds these into
same romstage or ramstage module.
Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
|
|
The ME hangs, the lspci shows no memory and the linux kernel
tries to request irq 0 twice. After suspend-resume the linux
kernel warns about double used irq.
genirq: Flags mismatch irq 0. 00000080 (mei_me) vs. 00015a00 (timer)
mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0.
dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -16
PM: Device 0000:00:16.0 failed to resume async: error -16
Change-Id: I56ef66388e58dddcfb858294ba274621c55fbef6
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14309
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Because the builders have the coreboot cross-compilers in their path,
the XGCCPATH variable needs to be set after building the new toolchain
before it will be used.
- Add $DEST/bin to $PATH if $DEST is set, add the default location
for toolchain builds otherwise. Because the jenkins build image puts
the tools in the path, we ca
- Add KEEP_SOURCES option to help speed up compilation (Slightly).
- Log .xcompile for verification that the right toolchain was used.
- Verify that test-toolchain passes.
Change-Id: I7c270dab94be7e8f801d527169767018a24986e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3c34f6e69b3760a10e67bdc41c8ef0e629beb881
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14129
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I3cf32ec58ba40db11fae3dda6dcb2375002e7cb4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14052
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ide0d48405d85ea2e889916f778e1556287651707
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14057
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I8cf021ea5baff05eb5f84cc014612084afe3f858
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14053
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Iba43630208be02603f4e0de5f62047bb3d23863a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14054
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I6e30a7be510c66fb1aa88314861d95f8ebe80377
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14056
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ia210e6832c18270043c0cb21b4881d9c802f3b2b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I40373768595a085bba9a5c934794e128f396828b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14059
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I7a053ac1d8ecc3e443e91daeb406bae0b8c13323
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14060
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Ifc32b251677f8b75ffca224c0c900e9c34c756b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14051
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I2cd6c1f1712e77ff98a9557519fb8efeeb400a69
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14049
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: I1313797d60925cc0627987936199e62073c264d7
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14061
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Change-Id: Iac737e15db512eac96cd16fe14983b66a03876bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14050
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Currently, the coreboot makefiles repeatedly run git to try to set
the KERNELVERSION variable and to fetch the submodules. This happens
three times for every build. By exporting a variable, we can catch
this on recursive makes and not run each of these steps again.
Change-Id: I85ab867b40e80c36bd94d48510ffe3252c6cf93f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Move code to handle leaving temp files around into cleanup.
Change-Id: Ief346d7973f693ec06c8bef6492cf1330858d9e1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14346
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Patch from Segher Boessenkool <segher@kernel.crashing.org>
Change-Id: Ia91e0d6e50399da38afd8cdc0b92c82e4efa0a08
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14380
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is taken from FILO and slightly enhanced.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ieadd9db3f1013ec1cd9f5a1dc44e17587617f1d1
Original-Change-Id: I961a7ddcd39657c9463806d7b82757eff0a4ac57
Original-Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Original-Reviewed-on: http://review.coreboot.org/190
Reviewed-on: https://review.coreboot.org/14386
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
drivers/usb/xhci.c and drivers/usb/ehci.c both require arch/barrier.h.
barrier.h is present for x86, arm, and arm64, but not for mips. This
is generating a build error after enabling USB by default on libpayload.
I believe that this slipped through the buiders due to them not getting
cleaned fully. It was caught in the coverity scan and when setting up
a new build server.
Change-Id: Idd89409a048009c087ce2a787d96a1efd089157f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14391
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
BIST result is already stored by arch/x86/bootblock_ctr0.S in
mm0. Also, eax does not contain BIST result by the time control
reaches bootblock_pre_c_entry. bootblock_crt0.S saves timestamp in mm2
which was being overwritten here. Thus, remove the saving of BIST
result from SoC code.
Change-Id: I65444689cf104c59c84574019f5daf82aab10bc7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14381
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
This symbol was added to fix a Kconfig lint error after the
Broadwell DE vendorcode was added. Now that the chipset's in
the codebase, it's no longer needed.
Change-Id: Iedb166129c9265cc2cfcc406d98bde92c1a82d2f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14384
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add Intel Broadwell-DE SOC and Camelback Mountain CRB to the list
Change-Id: I3f0c3ae8b38ecf3c3676fe497ade8b74ba94485d
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14382
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
By selecting this switch in Kconfig one can build complete rom image
including descriptor and ME/TXE.
Change-Id: I7307695008df9a61baba1eb024f1f48be62c53c8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14376
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I missed this license header, and it's causing a build breakage.
Change-Id: If472e5c081bd282f0b482af629d6ec2314a2c329
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14388
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In northcluster.c, the set_resources member of struct device_operations
is set to NULL. That causes this message on the console:
PCI: 00:00.0 missing set_resources
Eliminate that warning by setting set_resources=DEVICE_NOOP.
Change-Id: I4c6c07fd40b180ca44fe67c4a4d07318df10c40f
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14366
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
An unsigned enum expression is always strictly positive;
Comparison with '>= 0' is a tautology, hence remove it.
Change-Id: I910d672f8a27d278c2a2fe1e4f39fc61f2c5dbc5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/8207
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
To avoid diverging too much on an actively developed code base, keep
the changes to a separate commit that can be downstreamed more easily:
- removed unused includes
- gave kevin board a "Kevin" part number
- marked RW_LEGACY as CBFS region (to follow up upstream changes)
- moved romstage entry point to SoC code (instead of encouraging
per-board copy pasta)
Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14362
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
[pg: separated out from the combined commit that added both SoC and
board. Added board_info.txt that will be added downstream, too.]
Change-Id: I7facce7b98a5d19fb77746b1aee67fff74da8150
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840
Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332385
Reviewed-on: https://review.coreboot.org/14279
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Datasheet
https://www.exar.com/content/document.ashx?id=21368
Add support for Exar chip used on a custom board
that was designed to connect to the Olive Hill Plus
development platform. The register dump was verified
on the Olive Hill Plus platform.
Change-Id: Ibd3e13eefb706bd99b6e5b38634f6855b39848ab
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/14367
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia5bcd19d994e23375d7e6d2050113c809ae57296
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14368
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
gcc doesn't like these because they're undefined behavior, so use
zeroptr instead. For the loop that just does a number of writes (0..4),
use zeroptr + i.
Checked the disassembly (AMD_RUMBA and PCENGINES_ALIX2D) to not contain
ud2 anymore and to look reasonable where zeroptr was used.
Change-Id: I4a58220ec9a10c465909ca4ecbe5366d0a8cc0df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14345
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Some ld versions seem to merge the .zeroptr section (NOLOAD, address 0)
with some debug sections (NOLOAD, address 0) which makes the build
explode when the debug sections are then stripped (including the zeroptr
symbol).
Just define zeroptr to be 0, no sections needed, to avoid this
"optimization".
Checked the objdump -dS of code using it that the accesses look sane.
Change-Id: Ia7cb3e5eae87076caf479d5ae9155a02f74b5663
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14344
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is a lot of generic code in the 8250 driver that should
be available for non-8250 systems with serial ports as well.
Change-Id: I67fcb12b5fa99ae0047b3cbf1815043d3919437e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Store both the version number and git hash in the file name
when copying the buildgcc script to the destination directory.
Also, fix the quoting in the lines touched anyways, and move the
script to $TARGETDIR/share/
Change-Id: Ib37dc2be57ee7f0ae18a0b954f537f8b4c2db9d0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14347
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing dev->chip == NULL when dev == NULL doesn't make sense (and gcc
thinks that's undefined behavior which should be rewarded with a trap).
Change-Id: I801ce3d6b791fdf96b23333432dee394aa2e2ddf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ibb36292bb2fd40aa453dba1d9ce821f3e1e7a823
Reviewed-on: https://review.coreboot.org/14354
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I91d9537e8c78560c944c552255e703fc0e6f1f78
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14349
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14289
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Initial files to support Camelback Mountain CRB. This board uses
Broadwell-DE code which is based on FSP 1.0. Change is based on
Broadwell-DE Gold release.
Windows 7 and Fedora 21 have been verified using SeaBIOS payload,
also Fedora 21 with U-Boot payload.
Change-Id: Ie249588b79430084adeebbcdd8b483d936c655e3
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14015
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
As Aaron pointed out, the old definition made the compiler emit two
memory accesses, to 0 (for derefencing) and then reading at whatever
address could be read from there.
Change-Id: I5cdd53f5bd2d2397c43f09f3e5fa46be08744b01
Found-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14342
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of re-defining the macros, include cpu/x86/cr.h in
bootblock_crt0.S to re-use already defined macros for accessing CR*
flags.
Change-Id: Idade02f7a6bc880c9aad3bfacd05ac57b6d04e44
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14359
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Fix build break on current _CRS method with correct scope.
Change-Id: I75ba8abc547ec69be0a0950e23a7c31b447af31e
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14288
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This should help catch cases where the AML is not correct.
Change-Id: I48efb9ed0b62b3e17dcf3045ef9c32d813a412bc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On specific revisions of the ASUS KGPE-D16 (> 1.03G) there is a
high (< 1:10) chance of lockup from spurious HW monitor IRQs
during LPC configuration. This was originally erroneously identified
as a bug within the SP5100 southbridge due to serial console buffering
moving the hang slightly before HW monitor setup. It is currently
unknown how changing the CBFS layout / code size was able to alter
the frequency of the lockup occuring; this odd characteristic made
debugging extremely difficult, and it also indicates testing
across multiple PCB revisions will be neded to verify that the
bug has been completely resolved.
It is highly likely that the KCMA-D8 is also affected. As there
does not seem to be a reason to keep the HW monitor IRQ enabled,
simply disable it on both mainboards.
This configuration has passed burn-on power cycle testing with
no lockups noted. All other tests noted a lockup in under 25
power cycles or so, with failure typically occuring in under 5
power cycles; the affected Rev. 1.04 KGPE-D16 has cycled 25 times
times using this patch with only one failure finally noted. This
final failure may have in fact been related to SP5100 Erratum 18
as the frequency is more in line with the errata document guidelines.
Change-Id: Ie9f4f37d2c7dfad0a02daff8b75cd2a1e6f1b09a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14333
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Most people use USB keyboards.
Change-Id: Ia7cf513059565db7b86190c4aae62d7a35392408
Signed-off-by: Marcel Meißner <mm-meissner@gmx.de>
Reviewed-on: https://review.coreboot.org/7540
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
cat /sys/power/state should show supported sleep states as freeze and
mem where freeze is "Suspend to Idle" and mem is "Suspend to RAM"
Change-Id: Ia72aaf6642dcdc9106c1992af3cf6cb21a8fff4a
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14285
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6854f410b4d3847238f0253b7fbb9bbe8f9da395
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14282
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Do not disable warnings about unused but set variables to further
improve the code quality.
Change-Id: I25fa29ac42c9d09596d03f11fb01f31635a62a11
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/3981
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Changes in visible behaviour:
- The default make target doesn't run the tests anymore
- All generated files are stored under util/romcc/build/
(or $BUILD_DIR)
Change-Id: If003240742eb1902a6e9b337cdee299d7d66ee06
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14341
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Initial files to support Broadwell-DE SoC. This is FSP 1.0 based
project and is based on Broadwell-DE Gold release. Change has been
verified on Intel Camelback Mountain CRB.
Change-Id: I20ce8ee8dd1113a7a20a96910292697421f1ca57
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14014
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add all currently clean directories.
Change-Id: Ibfb6432b485adb7fdc930f57ea0af4ff35921d37
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14332
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: Ia78cf5a4b283b846346e5e50c6b2b36299a6a892
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14363
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: Iea1a4b8f7df08d2ae694401211b0b664f5980b02
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14327
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14321
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The way this was implemented before was causing ACPI failures. There
was also a basic misunderstanding of what the AddressMax field was used
for. In this case, because it's a fixed address, it should be the same
as the AddressMin field.
Getting rid of the addition in the field solves the ACPI output problem.
Change-Id: Idec2bf0ed27ae694e98f141087cdf22401937178
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14343
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
The driver interface function derives the driver specific pointer from
the API provided handle, no need to use the handle in the local
functions.
BRANCH=none
BUG=none
TEST=SPI interface with the flash ROM is still working properly.
Change-Id: I7725b658365473c733698ca050e780d1dd5072d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a2b42779785623bd1234ab2dfb0b4db76c890fc7
Original-Change-Id: I9d657dc23540e9eac52d2dbfc551ed32b7fa98f0
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338090
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
3288 and 3399 use the same pwm controller.
With this patch in place it is easy to add support for 3399.
BRANCH=none
BUG=none
TEST=booted veyron_jerry to kernel login prompt
Change-Id: If8f5697b4003d078b46de3fa3cebad6c8310a688
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: acf6132619167743c0c991b75f0f49c8d0e51ca7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Change-Id: I79428f9ec71017ad8f3ad67dac1468178ccc3a1e
Original-Reviewed-on: https://chromium-review.googlesource.com/338019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Both SOCs use the same base i2c controller, the difference mostly
being the number of interfaces and distribution of the interfaces'
registers between register files.
Upload check was complaining about misspelled labels, fixed them to
pacify the check.
With this patch in place it is easy to add support for 3399.
BUG=none
BRANCH=none
TEST=brought up veyron_mickey all the way to booting the kernel. It
properly recognized the TPM and the edid of the panel, proving
that i2c interface is operational.
Change-Id: I656640feabd0fc01d2c3b98bc5bd1e5f76f063f6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82832dfd4948ce9a5034ea8ec0463ab82f0f5754
Original-Change-Id: I4829ea53e5f4cb055793d9a7c9957d6438138956
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/337971
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied Kevin board can be booted to
Linux login propmt.
Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840
Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332385
Reviewed-on: https://review.coreboot.org/13915
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Trivial; Use tab over space for indent. Clean up some ASCII art
while here.
Change-Id: Id2478d140a98596c5eeefdf5b047c1ca23203909
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/8016
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is based on t420s. Tested on a T420 without discrete GPU.
There is no support for nvidia gpu and optimus.
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: Ie9405966e56180ac1c43a3c5b83181ee500177c8
Reviewed-on: https://review.coreboot.org/11765
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We already have the ability to add a pxe rom to cbfs, but it needs to be
configured and built separately.
This moves the existing Kconfig options for PXE from device/Kconfig and
the top level Makefile.inc to payloads, and adds the option to download
and build iPXE as part of the coreboot build process.
This configures the serial output of iPXE to match coreboot's serial
port configuration by editing the .h files. iPXE doesn't give any
real build-time method of setting these configuration options.
Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Add some additional filters for files that do not require
license headers.
- Add an alternative wording for the BSD license that is used
in several files.
- Add string for dummy files
- Stop checking if there are no files left.
- Remove 'local' keyword which is not posix compliant.
Change-Id: I2ed1b0572b5fbe84ea86173b7ec2106454399547
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14324
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
