| Age | Commit message (Collapse) | Author |
|---|
|
When powering down SSUSB, the system needs to wait the ACK from SSUSB.
We found that the setting of USB PAD top macro is not correct and
it will cause timeout waiting for the ACK from SSUSB.
To resolve this, we add mt_pll_set_usb_clock() in pll.c to enable usb
macro control for powering down SSUSB.
TEST=timeout of ssusb powerdown ack does not occur.
BUG=b:239634625
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.corp-partner.google.com>
Change-Id: I58ba86e0467284e9947bfda1005c151a3e0c8881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66600
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add new ram_id:0001 for memory part H9HCNNNCPMMLXR-NEE.
BUG=b:241494931
TEST=none
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iee9f881d8ab21396d208a6af9f0cec8414cb50a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
- ADP_P_* -> RPP_S_* (got mixed up I guess)
- Remove duplicates of ADP_S_ESPI_*
- Add infix _ESPI_ to all ADP_S device ID's
Document: 619362
Change-Id: Ic18ecbd420fc598f0ef6e3cf38e987ac3ae6067e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66629
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
R680E, Q670E, H610E are the ADL-S IoT variants
TEST=Boot ADL-S RVP DDR5 and see silicon info is reported
as PCH: AlderLake-S R680E
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I1804994b4b72f0484eabb15323736679d2668078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth
from the common block. Meteor Lake Platform will implement it.
BUG=b:213574324
TEST=Built coreboot image successfully.
Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC
memory modules), and the SPD info refers to one channel: the primary
bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder
Lake, there are 2 memory controllers with 4 32-bit channels each for
DDR5. FSP has 16 positions to store SPD data, some of which are only
used with LPDDR4/LPDDR5.
To try to make things less confusing, FSP abstracts the DDR5 channels
so that the configuration works like on DDR4. This is done by copying
each DIMM's SPD data to the other half-channel. Thus, fix the wrapper
parameters for DDR5 accordingly.
Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now
function properly. Without this patch, only the top slot would work.
Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use the actual model name for the variant dir.
Change-Id: I199b8efb5c3cddb8943ba4b761546caa11c67a30
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable RFIM Policy, request by RF team.
BUG=b:239657092
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id0f425d75a1ac9486a9284d4e8320ba4c63b182f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Consolidate MAX_BIOS_ENTRIES and MAX_PSP_ENTRIES definitions into one
file
Signed-off-by: Altamshali Hirani <al.hirani@amd.corp-partner.google.com>
Change-Id: Ie3c64a1875010e7fb368967283df6baf1cc7ba8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62911
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update coreboot.org PSP Firmware Documentation with current internal
PSP documentation.
Signed-off-by: Altamshali Hirani <al.hirani@amd.corp-partner.google.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Change-Id: I677f86614b0fdc6377fb2e27932ed3a8ded27102
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I404fcf59e89b75cd2488bcb51981aee2eb4ff0df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66468
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch backported from commit ba2e51bd496a (mb/google/brya: brya0:
Add ACPI support for Type-C ports) for google/rex.
BUG=b:224325352
TEST=Able to build Google/Rex and boot on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If0a9510784e8f62861ae4bc74805b1513a4865cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66538
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch describes the USB2/3 ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7d787a9986099852d6a0d193bbc28487bf430fe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66542
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch backport commit 9e23d017f555bad (mb/google/brya: Update
mainboard properties for BB retimer upgrade) for Google/Rex.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I508858683cf3cdb0cab5a564fef4a242f8a6679e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66541
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes the TCSS USB ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I08613b31aad47cbf573ed1b5fc68c91cf973e190
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66540
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds OC pin programming for USB2 Port 8.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic9dcaef5972d6c0e9fe264445ea10fcd9a82619f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66543
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable SOC_INTEL_GFX_NON_PREFETCHABLE_MMIO for MTL to fix guc driver
failure.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifc20935bccdda55db3e57eecd37a4260b3f1a2d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66613
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable.
Due to the prefetchable attribute, resource allocation for IGD BAR0 is
assigned WC memory and it causes kernel driver failure.
For avoiding kernel driver failure, ignore prefetch PCI attribute
for IGD BAR0 to assign UC memory.
We're working on publishing below information.
- IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR
- GTTMMADDR BAR should be always mapped as UC memory although
marked Pre-fetchable.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I673a9b99d207603b605756fc7d277c54c5d0f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66467
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim. coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".
BUG=b:239072117
TEST=Builds
Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I568a357b40e8bb69b2b26752d241f06adfbe029e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This adds SPDX identifiers to the remaining source files in the
lib directory that don't already have them.
A note on gcov-iov.h - As machine generated content, this file is
believed to be uncopyrightable, and therefore in the public domain, so
gets the CC-PDDC license even though there is code in the file.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ifcb584d78a55e56c1b5c02d424a7e950a7f115dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This adds SPDX identifiers to the remaining source files in the
include directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0dbf4c839eacf957eb6f272aa8bfa1eeedc0886f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66501
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
southbridge directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If74aa82a7c40293198e07e81ceac52bd8ca8ad27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66500
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
drivers directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I97f96de857515214069c3b77f3c781f7f0555c6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66499
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
mainboard directory that don't already have them.
Change-Id: I1adc204624f3ab6fcafd8fbb239e6d69e057973a
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66498
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This change adds support for enabling VPU on MTL SoC.
BUG=b:240665069
TEST=build coreboot mtlrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie79b45f34a669b9ff777599cb85217abac6cb74e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Add WiFi SAR table for joxer.
BUG=b:239788985
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ia8dddf454e441840233fa4405704ee1f0a8ed86c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66522
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Lance Zhao <lance.zhao@gmail.com>
Change-Id: Idc90c6e8186320979a72563fb5dcdc8fce760e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66562
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP reports missing IRQ for devices.
Add USBOTG (D20:F1) and CrashLog & Telemetry (D10:F0) to irq_constrain.
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ic02d33045a07a6888ba97d8f2c6fa71bc7e363e8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Creative Commons Public Domain Dedication and Certification is not
a license in the common sense in that it's stating that the associated
file is already in the public domain (having no copyright), and is not
actually putting it in the public domain like the CC-C0 license does.
The use for this in coreboot is for unlicensable files - either blank
files or files with no creative content. This allows these files to
have the SPDX identifier to identify them as having no known copyright
for open source license compliance.
If CC-PDM-1.0 is ever included in the list of SPDX licenses, that would
probably fit better, but because the public domain mark isn't actually
a license, and because "public domain" isn't well defined, CC-PDM was
rejected as a SPDX identifier.
For further information:
https://web.archive.org/web/20201018194411/https://github.com/spdx/license-list-XML/issues/988
Change-Id: Ibb300ecd066cde2a016195c2beca76a460c588e3
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66496
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The gcov files in the lib directory are licensed GPL 3.0 with the GCC
runtime library exception.
Add this as a valid license so that the files can get a correct SPDX
identifier.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I1cf9c3125592741923c9b4481038055f24fe6ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
These licenses and exceptions are allowed by coreboot's license checker,
but the copies of the licenses were missing from the LICENSES directory.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ic4233e556de08275fe50f1ec83828f9470b4b566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66494
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The EC used on zork uses a level high interrupt. This change configures
the polarity correctly.
The eSPI config is baked into RO verstage. The zork ToT build doesn't
use signed verstage since it's incompatible with the ToT version of
vboot. This means we can safely switch the keyboard IRQ polarity.
NOTE: Do not cherry pick this into the Zork firmware branch!
BUG=b:160595155
TEST=On morphius verify keyboard works as correctly and no spurious
interrupts are thrown on S0i3 resume. Also verified keyboard and mouse
work correctly in windows.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8d3195522f3bd5e477635494c7156683aae0ff0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The default state for the IRQ lines when the eSPI controller comes out
of reset is high. This is because the IRQ lines are shared with the
other IRQ sources using AND gates. This means that in order to not cause
any spurious interrupts or miss any interrupts, the IO-APIC must use a
low polarity trigger.
On zork/guybrush/skyrim the eSPI IRQs are currently working as follows:
* On power on/resume the eSPI controller drives IRQ 1 high.
* eSPI controller gets configured to not invert IRQ 1.
* OS configures IO-APIC IRQ 1 as Edge/High.
* EC writes to HIKDO (Keyboard Data Out) which causes the EC to set IRQ1
high.
* eSPI controller receives IRQ 1 high, doesn't invert it, and leaves IRQ
1 as high. This results in missing the first interrupt.
* When the x86 reads from HIKDO, the EC deasserts IRQ1. This causes the
eSPI controller to set IRQ1 to low. We are now primed to catch the
next edge high interrupt. This is generally not a problem since the
linux driver will probe the 8042 with interrupts off.
On S3/S0i3 resume since the eSPI controller comes out of reset driving
the IRQ lines high, we trigger a spurious IRQ since the IO-APIC is
configured to trigger on edge high. This results in the 8042 controller
getting incorrectly marked as a wake trigger.
By configuring the IO-APIC to use low polarity interrupts, we no longer
lose the first interrupt. This also means we can use a level interrupt
to match what the EC actually asserts.
We use the `Interrupt` keyword instead of the `IRQ` keyword in the ACPI
because the linux kernel will ignore the level/polarity parameters
for the `IRQ` keyword and default to `edge/high. `Interrupt` doesn't
have this problem.
The PIC is not currently configured anywhere and it defaults to an
edge/high trigger. We could add some code to configure the PICs trigger
register, but I don't think we need the functionality right now.
For zork and guybrush, this change is a no-op. eSPI is configured in
verstage which is located in RO, and we have already locked RO for
these devices. We will need to figure out how to properly set the
`vw_irq_polarity` for these devices.
BUG=b:218874489, b:160595155, b:184752352, b:157984427, b:238818104
TEST=On zork, guybrush and skyrim
$ suspend_stress_test --post_resume_command 'cat /sys/devices/platform/i8042/serio0/wakeup/wakeup35/active_count'
Verify keyboard works as expected and no interrupt storms are observed.
On morphius I verified keyboard and mouse work on windows as well.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4608a7684e34ebb389e0e55ceba7e7441939afe7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ia5def4cf86b47ac96ba5fc6ec86a139d5ad2765e
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Pujjo support WWAN device, enable USB3.0 port 3 for WWAN device
BUG=b:241322361
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: Iafe2ea18663794138e0a27879fc108d23eb81456
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This script creates a patch to remove all of the coreboot code that a
platform doesn't use. This is useful for auditing the codebase for an
individual platform or releasing a platform's code.
Unlike the script that Sage used that did something similar, this keeps
the entire Kconfig tree (Though in a single file), all makefiles that
are required to build, and the standard build tools can still be used.
This will allow for much easier re-integration back into the coreboot
codebase if code is released after running this.
This is just the initial version and more features needed to be added to
make it fully functional.
- It should be able to build multiple configurations to retain the code
for all of those configurations.
- Flag to remove submodules files as well
- Additional variable flags to replace hardcoded values.
- The list of makefiles that need to be kept is pretty long, and could
be updated so that they aren't needed by the top level makefiles.
- Add flag to show changed files
- Show number of files before and after script is run
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iec69db2ad1358846d649db627b6d60ac8c2204e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This update follows suggestions from Martin Roth about the contents of
the comment.
Change-Id: Ic296bcd6a0fb250426f5d75aac69a3fa0f2aaf32
Signed-off-by: Kevin Chowski <chowski@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
On boards which use both PSP recovery A/B layout as well as VBOOT A/B
layout, ISH_B directory entry is pointing directly to PSP Level2
directory. This is not correct and either ISH_B should be marked as not
present or it should point to the ISH_A directory itself which in turn
point to PSP L2 directory. Fix it by choosing the latter option.
BUG=None
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0a7a56e98de3f85669ff8ec2fcd1687aa33576a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:238262674
TEST=Build and check ufs.c file gets compiled for Nissa boards
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Idc5ad922b97bd1e65e5023f9126c43e42cfc38a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the SPL file from the 'cezanne' placeholder to a mendocino
filename. Also, move the default location to blobs/mainboard since
it's not board-agnostic.
BUG=b:241543152
BUILD=Enable feature and build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I47647c5d926484e25e3f893e72c671554e277a56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change the name of the whitelist file from the 'cezanne' placeholder
to a mendocino path/to/file. Also, as whitelist files won't be pushed
into a public repo, modify the path to point to site-local.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I49bbf1335606567735e36ed9bda1314bfc6247d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify sabrina's fw.cfg to point to the proper directory and use the
standard names, as released by AMD.
The name 'sabrina' was an alias used for the Mendocino product. The
public-facing builds have been using Cezanne blobs, renamed as Sabrina
or SBR, but can now take advantage of the appropriate blobs.
BUG=b:239072117
TEST=Build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Id646844e41980802be1e39dce96e5adaace4311d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This picks up the following changes
83c44ad mendocino: Add additional SPI configs
5141d91 mendocino: Add all blobs from PI 1.0.0.1
3b29a7d cezanne: Upgrade microcode patch to 00A50F00h
BUG=239072117
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I1060dc7bec8f436dccf270bc3abde75cb09bb591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move GPIO init for SSD_AUX_RESET_L to ensure that eMMC devices
will be initialized in time for the nominal boot flow.
BUG=b:237701972
TEST=Boots to OS
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I610966fd9d31581f15d8bcd51f8a116c27fd6311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66461
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This gets the display working.
BUG=b:240884260
BRANCH=firmware-brya-14505.B
TEST=display works in both depthcharge and linux
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I03edac865d68ef48e86d47a04f27ed84894f2f7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66395
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Set the watchdog timeout to 0 in ite_kill_watchdog, as in some ITE
models it is set to non-zero by default, activating the watchdog despite
us setting the control register to 0.
Based on:
- "ITE IT8786E-I Preliminary Specification V0.4.1 (For D Version)"
- Linux it87_wdt driver
Change-Id: I1e78e2acc96e9dd0f283c5c674d3277d26cdee26
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Make the default Microchip EC firmware path/to/file values overridable
by adding prompts to the strings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I300f78a11960dbe193165fcb379b7190e3de4545
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Looking into pciexp_get_ext_cap_offset() it seems a little hackish
and prone to endless loops. Either it should limit the loop or bail
out when pci_read_config32() returns 0xffffffff, meaning "Unsupported
Requests".
This commit fixes an endless loop when the queried PCIe device is
downstream of a legacy PCI bus which doesn't support extended config
space, thus pci_read_config32() will return 0xffffffff, for example,
the combination below with CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS
enabled.
TEST=Build and boot to OS in ASUS P8C WS with the following
peripherals and CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS enabled:
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4)
00:1c.4/00.0 SATA controller [0106]: Marvell Technology Group Ltd.
88SE9170 PCIe 2.0 x1 2-port SATA 6 Gb/s Controller [1b4b:9170]
(rev 13)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a4)
00:1e.0/00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI
Express-to-PCI Bridge [10b5:8111] (rev 21)
00:1e.0/03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc.
VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
(rev c0)
00:1e.0/00.0/00.0 Network controller [0280]: Qualcomm Atheros AR93xx
Wireless Network Adapter [168c:0030] (rev 01)
with 00:1c.4/00.0 being successfully tuned with pciexp_tune_dev(), and
00: 1e.0/00.0/00.0 not tuned as expected.
Change-Id: Ibb92548c47288b40e851fcc0a8a37937e8bdbf3c
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66439
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The software used to read the document listing the VR settings turns
out to not be perfectly compatible. Indeed, it displays a value of 55A
for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A.
After a thorough review using the software used to create the
document, it is the only value presenting a discrepancy.
BRANCH=firmware-brya-14505.B
BUG=b:239797178
TEST=build and boot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Boot issue while using FW slot A has been root-caused to the usage of
same TLB to map HW Crypto engines and SPI flash. With upcoming PSP
release, this TLB usage conflict has been resolved. Hence enable CCP
DMA.
BUG=b:240175446
TEST=Build and boot to OS in Skyrim with PSP verstage using CCP DMA.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2b12adb7e94e489bf07963a6f9a829cf4b36ad5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently bootblock does not initialize eSPI if it is already done in
PSP verstage. But some other component is clobbering the eSPI
configuration causing timeouts in EC communication after the boot flow
hits x86. To workaround this issue, re-initialize eSPI in bootblock.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I41c0b2816a106a6a547f3cb372693e1bb7f23734
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This adds a default early GPIO table in the case of us not being
able to identify a valid board ID.
Primarily, this is useful in the case of EC issues to ensure
that debug interfaces (e.g. UART) are always up and available.
BUG=b:238165977
TEST=Boots and no errors on simics
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I135dc6c29bc23195afe5c78eb79992691652d9e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66394
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some PCI capabilities should only be enabled if it is available not
only on a device, but also all bridge upstream of it. Checking only
the device and the bridge just above it may not be enough.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I1237d3b4b86dd0ae5eb586e3c3c407362e6ca291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66383
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'parent_cap' should be found from 'parent' instead of 'dev'.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I99dab83d90287ca924d30dc4aeac0ff96e877e5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Update generated FSP headers for Alder Lake N from v3222.03 to v3267.01.
Changes include:
- Add UPD Lp5BankMode
- Update UPD Offset in FspmUpd.h
BUG=b:240373012
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb522e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66222
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add active policy
2. Set critical policy trigger point to 105C
3. Correct TSR location
BUG=b:240634844
TEST=emerge-draco coreboot
values provided and verified by thermal team
Change-Id: I0d91bad03cbdeea5c84b533580ac98072ce0110b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
PERST# is supposed to be de-asserted in GC6 exit, but the original
patch used the CTXS Method, which drives a GPIO low, instead of
STXS, because PERST# is active-low. This patch fixes that.
BUG=b:214581763
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib0adb8efe5e2cc733ae2228614c58c124ba3f11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The lid sensor is on a daughterboard which can cause unintended
shutdowns when not connected. Disable lid sensor based shutdown behavior
in depthcharge until we have a better solution.
BUG=b:240005819
BRANCH=firmware-brya-14505.B
TEST=booted ghost, no longer shuts down due to missing lid sensor
Change-Id: I69f70255dee1b69e05b112c0174f5f52d1368837
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support for feature "In-Band ECC" not available for Tiger Lake
Similar to Elkhart Lake, Tiger Lake also provides this feature.
Ported from Elkhart Lake (CB:55668)
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The POWERCONTROL and PLATPOLICY NVJT subfunctions were incorrectly set
to 2 and 3, respectively. While looking at the ACPI code, Nvidia noticed
these are supposed to be 3 and 4, also respectively, so this patch fixes
that.
BUG=b:214581763
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I0f808aba7072b943ee2fad20e06ff39a9b54903d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
BUG=b:240624460
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I8542c9bb624a366bc1bb01f6eae66ba97520d19c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66381
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the rcomp, dqs and dq tables based on the schematic
dated July 17/2022 and Intel Kit #573387.
TEST=Built successfully
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I092f42db252052382d377a4ae48dc25f73080a3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds `_DEPRECATED_` tag to ChromeOS boot mode related event
logging types as below:
* ELOG_TYPE_CROS_RECOVERY_MODE <---- to record recovery boot reason
while booting into recovery mode
* ELOG_TYPE_CROS_DEVELOPER_MODE <--- if the platform is booted into
developer mode.
* ELOG_TYPE_CROS_DIAGNOSTICS <---- if the platform is booted into
diagnostic mode.
Drop static structure `cros_deprecated_recovery_reasons` as it has been
replaced by vb2_get_recovery_reason_string() function.
ELOG_TYPE_FW_BOOT_INFO event type is now used to record all those
related fw boot info along with ChromeOS boot mode/reason etc.
BUG=b:215615970
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I932952ce32337e2d54473667ce17582a90882da8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When GPP_B2 output high, there is a leakage path. This patch fix it by
setting the pin NC.
BUG=b:233959105
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I3c833d5d62c715960dcb27494a0b9b93c91e8f2f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update header files for FSP for Meteor Lake platform to
version 2304_01, previous version being 2253_00.
FSPM:
1. Removed CpuCrashLogDevice
2. Address offset changes
FSPS:
Includes below new UPDs
1. VpuEnable
2. SerialIoI3cMode
3. ThcAssignment
4. PchIshI3cEnable
BUG=b:240665069
TEST=emerge-rex intel-mtlfsp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I9740e5877af745124d573425da623e814d8df5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD.
BUG=b:240665069
TEST=build rex coreboot
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Building firmware for Brya is currently broken due to the RO_FWID region
for adlrvp_m_ext_ec bloating past 64 characters.
The CONFIG_MAINBOARD_PART_NUMBER is catenated onto the
CONFIG_MAINBOARD_VENDOR string, which for Intel, makes for a very long
trunk string that the kernel version will then be added to form the
RO_FWID string. For Intel, that trunk string is already pretty long at :
"Intel Corporation_Alder Lake Client Platform".
Shortening the CONFIG_MAINBOARD_PART_NUMBER should address this issue
for now.
BUG=b:241273391
TEST="emerge-brya coreboot chromeos-bootimage" and verify it builds
successfully
Change-Id: Ie862c87dd9a24743f249f1b10862ca6f3295db23
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I774be6d80e0aae725ecb1027501c8d66e0bf5a08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This function is only called from the same compilation unit, so turn it
into a static function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5c2deaa46f69c763df9612e39415b37c60d631be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: Ie5c2d01e13cafdbfd629ebe52af8b1f0cc8f20be
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Check return value of cbfs_truncate_space() in cbfs_truncate().
Remove return from cbfs_image_from_buffer() to inform about invalid
image region when incorrect offset header was provided.
Also change header offset provided to mentioned function in
cbfs_expand_to_region() and cbfs_truncate_space() from zero
to HEADER_OFFSET_UNKNOWN, as they do not support images with cbfs master
header.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ib009212692fb3594a826436df765860f54837154
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enabling required config items to execute verstage in PSP.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Iee14dc80cb6691acb5cb59a21da5a3dff69f7dd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66135
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use 0x016llx to print device resource info so that both 64bit and
32bit resources could be displayed correctly.
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Change-Id: I0ec4c47cca4a09ceb7dc929efaa5630b1f9df81c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The check was recently removed to allow callers to pass `count == 0`.
Dereferencing the `msg` array is invalid in that case, though. Linux,
where we borrowed the i2c interface from, also treats this with -EINVAL.
Change-Id: I1eec02dd3a3fcf2d477a62cc65292fca40e469d3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
We actually want the bus driver to process the 1 zero-length write
we are passing. So set the count to 1.
Change-Id: I5a41abb68c27a83715b6baec91ece9fa90b66a8c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66337
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and
MT8186, so we move them to dramc_soc_common.h
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Retrieve the SKU ID for Geralt via CBI interface. If that failed
(or no data found), fall back to ADC channels for SKU ID.
- The RAM code is implemented by the resistor straps that we can read
and decode from ADC.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31626e44bd873a3866c9bd1d511b476737f15a20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66275
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure ChromeOS specific GPIOs:
- Open-drain pins to high-z mode:
GPIO_EC_AP_INT_ODL, GPIO_GSC_AP_INT_ODL and GPIO_WP_ODL.
- GPO mode:
GPIO_AP_EC_WARM_RST_REQ, GPIO_EN_SPKR and GPIO_XHCI_INIT_DONE.
This patch is based on MT8188G_GPIO_Formal_Application_Spec_V0.3.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I84d3f62ec8a3966fe1982d5d4cf6ff270450d4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66274
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize I2C bus 1 for TPM control.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If5807c9bb39260315ecbc55305def483bd2b8c51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66273
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update SoC GPIO setting of unused DMIC channel according to beadrix
schematics.
GPP_S2 : NF2 -> NC (DMIC1_CLK)
GPP_S3 : NF2 -> NC (DMIC1_DATA)
BUG=b:203113413, b:237224862
BRANCH=None
TEST=on beadrix, validated by beadrix's DMIC working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibe2f432cd74b546218ff4ee6e428e9eed9ac611f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add wifi sar for oscino
BUG=b:240373077
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede
coreboot-private-files-baseboard-dedede
coreboot
chromeos-bootimage.
Cq-Depend: chrome-internal:4893022
Change-Id: I44cbe8ee08d6136ed116623046893c9749795e50
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66176
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update SoC GPIO setting of adding BC1.2 SLGC55545 according to beadrix
schematics.
GPP_A18 : NC -> NF1 (USB_OC0_N)
BUG=b:214393595, b:226294980
BRANCH=None
TEST=on beadrix, validated by beadrix's Type A working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I746931582cc12f49f7f1c667563350ebac8ddfa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Atlas uses IoT FSP.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I4c20600e0b62367e6e58908cf9cf916f309e6362
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add new config FSP_TYPE_IOT to add the IoT FSP option so that
respective mainboard Kconfig can use IoT FSP if needed.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The latest master adds the missing MemInfoHob.h to IOT ADL-P &
ADL-S folders.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8ef998b2e414d3d63494e6177b4fde2dc26e9d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9755 support for kuldax.
BUG=b:232858957
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I1b2c0bff8497d727c697ea6287078055a39bd1f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 3 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:240600260
TEST=emerge-draco coreboot
verified by thermal team
Change-Id: I3044643d52f1d6e883beb3ec87a77f32d086f46c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
UFS storage devices require the bRefClkFreq attribute to be set to
operate correctly in high speed mode. The correct value is determined by
what the SoC / board supports. For the ADL UFS controller, it is
19.2 MHz.
a) Introduce a new ACPI property "ref-clk-freq".
b) Add support to configure this property using an SoC Kconfig.
Kernel patch:
https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/
20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/
BUG=b:238262674
TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel
correctly parses ref-clk-freq as 19.2 MHz.
Scope (\_SB.PCI0)
{
Device (UFS)
{
Name (_ADR, 0x0000000000120007) // _ADR: Address
Name (_DDN, "UFS Controller") // _DDN: DOS Device Name
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
/* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"ref-clk-freq",
0x0124F800
}
}
})
}
}
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Switching off the pads of the internal crystal oscillator that connect
to the crystal on the board in S0i3 saves a little power, so enable it.
No measurements to quantify the power savings have been made. PPR #57243
revision 1.59 was used as a reference.
BUG=b:237647468
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52f14ae5c614ad8ff0479b619de7164afa1e7648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66336
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This change adds support to enable edp gpios, display init for
herobrine.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49
Change-Id: I01dbe23afbb3d41d87f24cb7dcfa456cb7f133fb
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64885
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add support for edp aux read and write.
- Update edp panel properties based on edid read.
- Configure edp controller and edp phy.
Panel details:
Manufacturer: SHP Model 1523 Serial Number 0
Made week 53 of 2020
EDID version: 1.4
Digital display
8 bits per primary color channel
DisplayPort interface
Maximum image size: 31 cm x 17 cm
Gamma: 220%
Check DPMS levels
Supported color formats: RGB 4:4:4
Default (sRGB) color space is primary color space
First detailed timing is preferred timing
Supports GTF timings within operating range
Established timings supported:
Standard timings supported:
Detailed timings
Hex of detail: 5a8780a070384d403020350035ae10000018
Detailed mode (IN HEX): Clock 346500 KHz, 135 mm x ae mm
0780 07b0 07d0 0820 hborder 0
0438 043b 0440 0485 vborder 0
-hsync -vsync
Did detailed timing
Hex of detail: 653880a070384d403020350035ae10000018
Detailed mode (IN HEX): Clock 144370 KHz, 135 mm x ae mm
0780 07b0 07d0 0820 hborder 0
0438 043b 0440 0485 vborder 0
-hsync -vsync
Hex of detail: 000000fd003090a7a7230100000000000000
Monitor ranges (bare limits): 48-144Hz V, 167-167kHz H, max dotclock
350MHz
Hex of detail: 000000fc004c513134304d314a5734390a20
Monitor name: LQ140M1JW49
Changes in V2:
- Remove Misc delays in edp code.
- Move mdss soc code to disp.c
- Update EDID read using I2C write & read.
Changes in V3:
- Remove unrelated delays.
- Misc changes.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Change-Id: If89abb76028766b19450e756889a5d7776106f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This patch adds a function to calculate best rational approximation
for a given fraction and unit tests for it.
Change-Id: I2272d9bb31cde54e65721f95662b80754eee50c2
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66010
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gcc 12 fails the build with the warning below:
CC romstage/lib/cbfs.o
src/lib/cbfs.c: In function 'switch_to_postram_cache':
src/lib/cbfs.c:31:32: error: comparison between two arrays [-Werror=array-compare]
31 | if (_preram_cbfs_cache != _postram_cbfs_cache)
| ^~
src/lib/cbfs.c:31:32: note: use '&_preram_cbfs_cache[0] != &_postram_cbfs_cache[0]' to compare the addresses
Instead of following gcc’s suggestion, disable the warning for gcc as
requested by Julius [1]:
> Can we just set -Wno-array-compare instead? There's nothing illegal
> about that expression and as we can see in this case, there are
> perfectly reasonable cases where you might want to do something like
> that. On the other hand, I don't really see a realistic scenario where
> this warning could prevent a real problem (anyone who doesn't know
> that array1 == array2 doesn't compare the array elements in C
> shouldn't have any business submitting code to coreboot).
[1]: https://review.coreboot.org/c/coreboot/+/62827/1
Found-by: gcc-12 (Debian 12-20220313-1) 12.0.1 20220314 (experimental) [master r12-7638-g823b3b79cd2]
Found-by: gcc (Debian 12.1.0-7) 12.1.0
Change-Id: I322f7cc57dcca713141bddaaaed9ec034898754d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
BUG=b:180458099
TEST=Boot DDR5 to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable I2C2 and register touchscreen ACPI device for pirika.
BUG=b:236564261
TEST=touch screen is functional.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Id2fd5606b7126eabc1c88bf516198ff00b5d75dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Follow latest schematic, GPP_A17 is used to enable AMP power.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=Check I2C scan can see the AMP return ACK.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia6c52302a12ddec68303714ac07e96a65a8f8fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
