summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-15src/device: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: I30ed9661d8e84be49d362baafbb2bc624952c287 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50522 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15src/arch: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: Idb80b21bb5dc4b461f89a3414d51b7d98a8328d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50521 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/lippert/frontrunner-af: Drop OSFL method in ASLKyösti Mälkki
Method only set variable OSRV, which nobody evaluates. Change-Id: I76d86af8ef6b75531f11612935dd097ee1e1a388 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-15drivers/spi: Stop using a variable-length arrayAngel Pons
Only the call in `spi_flash_cmd_write_page_program` uses non-constant values for the array length. However, the value for `data_len` has an upper bound: `flash->page_size` is set to `1U << vi->page_size_shift` which depends on the flash chip vendor info, and the largest value it can currently have is 8. Thus, the maximum page size is currently 256. Define the `MAX_FLASH_CMD_DATA_SIZE` macro to place an upper bound on the amount of data that can be written in one command. Then, use this value to allocate a fixed-size buffer in `spi_flash_cmd_write`. Also, add a check to prevent buffer overflow problems. Finally, ensure that the `spi_flash_cmd_write_page_program` function always writes no more than 256 bytes of data when using the `spi_flash_cmd_write` function. Tested on Asrock B85M Pro4 (Winbond W25Q64FV), MRC cache still works. Change-Id: Ib630bff1b496bc276616989d4506a3c96f242e26 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-15soc/intel/broadwell/pch: Use Lynxpoint GPIO codeAngel Pons
This allows dropping `gpio.c` from Broadwell. Change-Id: I6b34e11f849cdf01e402fe79d078711af94e1ec0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50081 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15broadwell boards: Switch to Lynxpoint GPIO headersAngel Pons
Move `CROS_GPIO_DEVICE_NAME` to a new `chromeos.h` header, because Lynxpoint uses a different value. Also drop unnecessary includes. Tested with BUILD_TIMELESS=1, Google Tidus remains identical. Change-Id: I38baed2c114fb93cfb82535a6ec00fb67e596d64 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50080 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15soc/intel/broadwell/pch: Prepare to drop `gpio.h`Angel Pons
Use `lp_gpio.h` from Lynxpoint instead. Subsequent commits will update the mainboards and then drop all GPIO code from Broadwell. Tested with BUILD_TIMELESS=1, Google Tidus remains identical. Change-Id: Idef89037c2ca781ac3e921abb4b3dc3f7c4b3b5f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50079 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/samus: Replace define with literalAngel Pons
The `GPIO_OUT_HIGH` macro is not present on Lynxpoint headers. Change-Id: I12dd065bee49097c602febf18c6c9940ecec5106 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50078 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/tidus: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Tidus remains identical. Change-Id: I1521a51455e2aa148298853bb1878e82b9f0c368 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50077 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/rikku: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Rikku remains identical. Change-Id: I4d5bec4ec18b645a14d21fbee7334761901a30df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50076 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/jecht: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Jecht remains identical. Change-Id: I193fe1471b8ade5d03e874f92425962c1ed960c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50075 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/jecht/var/guado: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Guado remains identical. Change-Id: I3a806d07b0ca147492b90feaf90235ed919b1bb2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50074 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/samus: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Samus remains identical. Change-Id: I465457ea8e9a9716121eacc0f6d64de463f41d89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50073 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/lulu: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Lulu remains identical. Change-Id: I0f0a584b3354971ee8d478fd17825e498ff3e423 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50072 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/gandof: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Gandof remains identical. Change-Id: I168fcad7088706ca5b21f5fbf6790b13054499e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50071 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/buddy: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Buddy remains identical. Change-Id: I6e6256a9cc88c9d0743150bfdf12b1b482fe157d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50070 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/auron_yuna: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Auron Yuna remains identical. Change-Id: I17e6bf20114f43da2897ec320ca26d8c6f6a4b09 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50069 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/auron/var/auron_paine: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Google Auron Paine remains identical. Change-Id: I00b9184fe6f002c3e089c9fbc815862d60e7694f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50068 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/intel/wtm2: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Intel WTM2 remains identical. Change-Id: I422421cc3c336a7a1aceaff7b37ab7c82f64a03f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50067 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/purism/librem_bdw: Switch to Lynxpoint GPIO macrosAngel Pons
Prepare to unify Lynxpoint LP and Broadwell GPIO code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I573cd439e8284d84036e71615944f7a195155593 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50066 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15mb/google/brya: Add EC I/O decode windowsTim Wawrzynczak
BUG=b:180013349 TEST=console shows successful EC <-> SoC communications Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie09dcfa8b0de2706ffc236a978dc159594e327c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15mb/google/brya: Enable cr50 supportTim Wawrzynczak
Add Kconfig options and devicetree entries for cr50 TPM. BUG=b:180017621 TEST=verify (via console) successful cr50 communications in verstage and payload (depthcharge). Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I80e27d0377960fb81f9149efb6f062d06432d40d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15mb/google/guybrush: Configure non-native function GPIOsMathew King
Second pass GPIO configuration to enable the non-native function GPIOs based on the guybrush Proto 0 reference schematic 0210. BUG=b:177909472 TEST=builds Change-Id: I0fdc4d7369353f88cf05e2e1ec08898d4605e602 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-15soc/amd/cezanne: Add uart.c to smm so we can support DEBUG_SMIRaul E Rangel
Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ife43352db564654ed538383a157431ee10856518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-15nb/intel/sandybridge: Correct description of QCLKAngel Pons
QCLK means "quadrature clock", and is equivalent to one half of a full clock cycle (tCK). Fix the comment. The `QCLK_PI` value is still valid. Change-Id: I7089fc32381addc280a71761a377075f107b5c62 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49363 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15soc/intel/*: Move prmrr_core_configurePatrick Rudolph
Move prmrr_core_configure before clearing MCEs. This is required for the following patch in order to update microcode after PRMRR has been configured, but before MCEs have been cleared. According to Document 565432 this should be no issue in regards to SGX activation. Change-Id: Id2808a3989adff493aaf4175cbeccd080efaaedf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-15sb/intel/lynxpoint: Clean up lp_gpio.hAngel Pons
Move `mainboard_gpio_map` declaration inside header and reorder some function declarations. This is to align the header with Broadwell. Change-Id: I436d7fdabf8d574e5dd2787fb6097f384cc8e453 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50065 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15soc/intel/broadwell/pch: Rename GPIO identifiersAngel Pons
Rename structs, types and functions to match Lynx Point's names. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I11ea27b00b5820eb5553712e0420836470ec0d27 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50064 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-15intel/xeon_sp/util: Use get_stack_busno instead of get_cpubusnosMaxim Polyakov
This function is more convenient to get the value of a single bus number than get_cpubusnos(). Now get_cpubusnos is not used anywhere, so remove it. Change-Id: I71c06c2d69344d97e48609e67a3966ed8c671152 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-15tint: update the patch version numbers according to a new tint versionMike Banon
Rebase the libpayload_tint.patch to update its internal version numbers from 0.04+nmu1 to 0.05. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I91f780f80026147c3c35330625a4106c65a1ddf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50468 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/picasso: always include PSP secure OS in amdfwFelix Held
When USE_PSPSECUREOS isn't selected, we get stuck in FSP-S. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I60d0e5ab0bd9f4d76cc48d08ca05d27c60e898c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-14arch/x86: Drop `cstates` pointer from CPU driversAngel Pons
Nothing uses this pointer anymore. Change-Id: Id2dee8f4cb243114d6f7f7485402acb9b73b7900 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49808 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14cpu/intel/haswell: Constify ACPI c-state arraysAngel Pons
Change-Id: I5538d8279392238e59aba99ade4b5fe13f250ca8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49805 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14cpu/intel/haswell: Drop c-state table indirectionAngel Pons
Accessing it directly allows proper bounds-checking. Change-Id: Ifb539051e4a91ddcdb5ffec4850dc2fb30482aea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49804 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14cpu/intel/model_206ax: Drop c-state table indirectionAngel Pons
Accessing it directly allows proper bounds-checking. Change-Id: I2582a7edf5fba28febe570bddccacb85a3269684 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49801 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14cpu/intel/model_206ax: Replace `generate_cstate_entries`Angel Pons
Leverage the existing `acpigen_write_CST_package` function. Yes, bad devicetree values can trigger undefined behavior. The old code already had this issue, and will be addressed in subsequent commits. Change-Id: Icec5431987d91242930efcea0c8ea4e3df3182fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49093 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/cezanne: add partial data fabric setupFelix Held
I'm not 100% sure yet if this code will be common for all AMD SoCs, so I'll add a copy for Cezanne for now. This part of the code should probably be reworked after the initial bringup of Cezanne anyway. DF MMIO register configuration at the beginning of data_fabric_set_mmio_np: === Data Fabric MMIO configuration registers === Addresses are shifted to the right by 16 bits. idx control base limit 0 a3 fc00 febf 1 a3 1000000 fffcffff 2 a3 d000 f7ff 3 a0 0 0 4 a3 fed0 fed0 5 a0 0 0 6 a0 0 0 7 a0 0 0 DF MMIO register configuration at the end of data_fabric_set_mmio_np: === Data Fabric MMIO configuration registers === Addresses are shifted to the right by 16 bits. idx control base limit 0 a3 fc00 febf 1 a3 1000000 fffcffff 2 a3 d000 f7ff 3 10a3 fed0 fedf 4 a0 0 0 5 a0 0 0 6 a0 0 0 7 a0 0 0 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia243a0cad311eb210d14d6242c52f599db22515c Reviewed-on: https://review.coreboot.org/c/coreboot/+/50624 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/cezanne/include/iomap: add HPET base addressFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I72559147a3f86f0cb843b74af9b148d23229ff14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50623 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/common/block/data_fabric: add data_fabric_print_mmio_confFelix Held
Output on Picasso at the beginning of data_fabric_set_mmio_np: === Data Fabric MMIO configuration registers === Addresses are shifted to the right by 16 bits. idx control base limit 0 93 fc00 febf 1 93 1000000 ffffffff 2 93 d000 f7ff 3 90 0 0 4 93 fed0 fed0 5 90 0 0 6 90 0 0 7 90 0 0 Output on Picasso at the end of data_fabric_set_mmio_np: === Data Fabric MMIO configuration registers === Addresses are shifted to the right by 16 bits. idx control base limit 0 93 fc00 febf 1 93 1000000 ffffffff 2 93 d000 f7ff 3 1093 fed0 fedf 4 90 0 0 5 90 0 0 6 90 0 0 7 90 0 0 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I74617dfc6099489f3c81d0e385b502f1bbecea78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50640 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14sb/amd/cimx/sb800: Move common OSFL method in ASLKyösti Mälkki
We deal with mb/lippert/frontrunner-af later since it currently does not include <cimx/sb800/acpi/fch.asl>. Change-Id: I30b611fc1fb01777223d7222adc96308a247a35c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50591 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14AGESA,binaryPI boards: Drop OSV in ASLKyösti Mälkki
Not referenced anywhere in ASL. Change-Id: I52ac4722e48e1cc377386316dc034fb45a98181a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50471 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14ACPI: Move common _PIC methodKyösti Mälkki
Change-Id: I659835354570fb1d4860fcbddf2a51831170a374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-14sb,soc/amd: Drop empty CIRQ call from _PICKyösti Mälkki
Change-Id: Iaa51e0530a3f72456d3d4e7a0c55b768ba63e322 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49904 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14sb/amd/cimx/sb800: Drop CIRQ method from _PICKyösti Mälkki
Change-Id: Ie4aad7b6580100377c12f128905f7f409bdb5295 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50590 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14util/cbfstool: Fix build in 32-bit userspaceKyösti Mälkki
Fix regression from commit 0dcc0662f3 util/cbfstool: Introduce concept of mmap_window. Use of region_end() wraps around at 4 GiB, if utility is run in 32bit userspace. The build completes with an invalid coreboot.rom, while one can find error message in stdout or make.log: E: Host address(ffc002e4) not in any mmap window! Change-Id: Ib9b6b60c7b5031122901aabad7b3aa8d59f1bc68 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-14soc/amd/picasso/data_fabric: factor out common MMIO register definesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I663a73308d33f48c6b945007f3eaac84d4712f59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50639 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/picasso/data_fabric: move more helper functions to common codeFelix Held
The number of data fabric MMIO registers is SoC-specific, so we need to keep that in the SoC code. This also removes a redundant pair of brackets and moves a loop counter declaration into the head of the loop. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8499f1c1f7bf6849b5955a463de2e06962d5de68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50638 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/picasso/data_fabric: use common access functionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib8cda860ca0ff81d7703c3277aeec629d89eab45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50622 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/common/block/data_fabric: add data_fabric_broadcast_read/write32Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I81e7ff293865ef22ed74606e1e79f67a460de4a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50621 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/common/block/data_fabric: add data_fabric_write32Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c1ae03e9aec1dec45333e697060308cb6cbda4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/50620 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/picasso: move data_fabric_read32 to common codeFelix Held
The exact same mechanism is used on Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3179d8ec35efa29f9bc66854c3690b389d980bba Reviewed-on: https://review.coreboot.org/c/coreboot/+/50619 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14sb,soc/amd: Move _PIC method to global scopeKyösti Mälkki
Fix regression with commit aa969e887a ACPI: Move PICM declaration. While mentioned in the commit message there already, the default value for AMD boards changed from IOAPIC mode to PIC mode. ACPI 6.3 spec has this text regarding _PIC method: If the platform CPU architecture supports PIC mode and the method is never called, the platform runtime firmware must assume PIC mode. If MADT has IOAPIC entries, OS will want to change to APIC model. But the method _PIC was not in the global scope so it could not be called and therefore _PRT continued to report PIC model interrupt routing. Already fixed for soc/amd/picasso in commit 839f668. Change-Id: I7f3bb0d45946cec315694de1d540fea4d828348e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-14soc/amd/cezanne/chipset.cb: add SMBus and data fabric PCI devicesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica9b4adb1ec2b3663ce2d623cfe7b6539cd9c71b Reviewed-on: https://review.coreboot.org/c/coreboot/+/50631 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14soc/amd/cezanne: move CPU cluster to chipset device treeFelix Held
This will be common for all boards, so move it to the chipset device tree. TEST=CPU cluster and LAPIC still show up in console logs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia49e7b4cfc09c60b6152b8ccc47f37b6adc1e319 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50613 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14mb/amd/majolica/mainboard: Set ACPI IRQRaul E Rangel
We now pass the ACPI SCI IRQ to the OS, so make sure the board routes it correctly. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1b4d5e0bfb1d9df9ac8a8c41cdf466a67f2673d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2021-02-14soc/amd/cezanne: Fill FADT and MADTRaul E Rangel
The MADT doesn't populate the IO-APICs yet since we need FSP to configure those. The FADT differs from picasso in the following ways: * The duty_offset is supposed to be 0 * Don't clear x_firmware_ctl_l * Make the extended addresses use MMIO Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib6c3a01084a0de33894885b47c637a292d252ed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-14soc/amd/cezanne: Enable uCode updateRaul E Rangel
TEST=Boot majolica and see microcode update CBFS: Found 'cpu_microcode_blob.bin' @0x6900 size 0x15c0 in mcache @0xcf7fe9d8 microcode: patch id to apply = 0x0a50000b microcode: being updated to patch id = 0x0a50000b succeeded Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If50b1d8b3ebf4b3e6f8a9dd3ab96073e0cb92424 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-14soc/amd: Move update_microcode.c to common/block/cpuRaul E Rangel
We also want to support uCode loading on cezanne. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6f10564c93ce72aea7ff52a8565d65d8b56452f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-13superio/smsc/sch5545: Add missing <types.h>Elyes HAOUAS
Add needed but missing <types.h>. Change-Id: I16c6a86e8c8863a8e16a63a379484c2b47d5185e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-13include/acpi/acpi.h: Add ACPI_MADT_LAPIC_NMI_ALL_PROCESSORSRaul E Rangel
This is a magic value that means all processors. See Table 5-52 Local APIC NMI Structure in ACPI Spec 6.3. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic2fc060fda21bec44258bcae62ddb230be542759 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13soc/amd/cezanne: select ACPI support and make the compiler happyFelix Held
Follow-up patches will add more functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9b806569154e46418fa7d4fa35575a0acfec9132 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13soc/amd/common/acpi/gpio_bank_lib.asl: Add missing headerRaul E Rangel
This file references ACPIMMIO_GPIO0_BASE. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic65a1f8759d10e7d78e30cfc82895e5af8cd83a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50571 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13mb/google/guybrush: Add plain dsdtRaul E Rangel
Needed to enable ACPI support for cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5869905ed053cdca5f61697cffc7f9b59370859 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13mb/amd/majolica: Add plain dsdtRaul E Rangel
Needed to enable ACPI support for cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifd71635d3493e0cf104b60ecf94ebdf70d512b94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13soc/amd/cezanne/acpi: Add plain soc.aslRaul E Rangel
Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I227cdb7cb4848d1d26f6d7fa13ac2cc1aea08d1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/50570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13soc/amd: introduce and use common IOAPIC IDsFelix Held
Stoneyridge used CONFIG_MAX_CPUS and CONFIG_MAX_CPUS + 1 directly as IOAPIC IDs and Picasso had Kconfig options to configure that, but still used the common SMBus controller code that used CONFIG_MAX_CPUS as ID for the FCH IOAPIC. If a board overrides the PICASSO_FCH_IOAPIC_ID Kconfig option to a value that isn't CONFIG_MAX_CPUS, we'll get a mismatch between the ID that gets written into the FCH IOAPIC register and the ID in the corresponding ACPI table. In order to avoid that add defines to each SOC's southbridge.c and use them in all soc/amd code. Change-Id: I94f54d3e6d284391ae6ecad00a76de18dcdd4669 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50575 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13soc/amd/cezanne: always include PSP secure OS in amdfwFelix Held
When USE_PSPSECUREOS isn't selected, we don't even get post codes on Majolica, so remove this option. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0ec976f40d962a2d9f2bd36dc97d86526bd661ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/50601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-13soc/amd/cezanne: always add S0i3 firmware part to amdfwFelix Held
Without this part being present in amdfw the PSP won't enter its normal operation mode, but goes into recovery mode instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If13b5495e9f246afd0317daaa53c3d2cefbaa4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/50600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
2021-02-13soc/amd/cezanne/bootblock: call write_resume_eip in bootblock_c_entryFelix Held
Change-Id: I0b785abdd56af3bb67e3e36e5e3b40e544f0ca5a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-13mb/lippert/frontrunner-af: Use common sb800/acpi/pcie.aslKyösti Mälkki
Change-Id: I6e6cdc49da540bd9901128bd1ef9f7060bc91f4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-13sb/intel/bd82x6x: Clean up early_me.c cosmeticsAngel Pons
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: I0dfbaaf4cb17841de109ea6abc08022846b5bd4e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49994 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x/me_smm.c: Deduplicate finalisation codeAngel Pons
The only difference between ME7 and ME8 is the MKHI message handling. Remove duplicated code, and also clean up includes. Change-Id: Ia44eb29d3509eb4208ba2aed9e0cf7e8f8d2c41a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49992 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Move ME SMM code into a separate fileAngel Pons
This allows dropping some preprocessor usage. The `mkhi_end_of_post` static functions had to be renamed to avoid a name clash. A follow-up will tidy up the code in me_smm.c to reduce some duplication. Change-Id: I6357fed3540be87f42d1fd59534666b9092d0652 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49991 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Relocate some static functionsAngel Pons
This allows us to get rid of the `__unused` attributes. Subsequent commits will separate ramstage and SMM code into separate files. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: I1aaef5aa23561bee04f8dd9ddca66738bca91bb4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49990 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Evgeny Zinoviev <me@ch1p.io> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/bd82x6x: Use HPTS() for HPET visibilityKyösti Mälkki
Platforms with bd82x6x do not initialise OSYS, so HPET is always hidden. The two boards lenovo/x201 and packardbell/ms2290 using sb/intel/ibexpeak but still including <bd8x62x/acpi/lpc.asl> initialised OSYS using _OSI() method and showed HPET selectively. Change-Id: I02fffd439be2a5a9d22afd67e68abce888361214 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49486 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13intel/broadwell,lynxpoint: Use HPTS() for HPET visibilityKyösti Mälkki
Platforms do not initialise OSYS so HPET is always hidden. Change-Id: I5f030b156355ea407d37cdb2eda8a3161085436f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-13sb/intel/i82801jx: Use HPTS() for HPET visibilityKyösti Mälkki
Change-Id: I741d94341ed59f5b5fbb8526205e8b502764a15a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50481 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb/intel/i82801gx,ix: Use HPTS() for HPET visibilityKyösti Mälkki
Change-Id: Id38228265ad89e3f96ea6f37bcc0da574a3f8c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49484 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-13sb,soc/intel: Add HPTS() for HPET visibilityKyösti Mälkki
Based on the detected OS the HPET ACPI device needs to be hidden sometimes. Change-Id: I4c6f87f30ea0de5c073b1fcf57794bb9e19d4d91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12trogdor: Add fingerprint power sequencingJulius Werner
Some Trogdor variants will include a fingerprint sensor, so this patch adds support for its power sequencing. There is a requirement that the fingerprint power needs to be *off* for at least 200ms, and when it is turned back on it needs to stabilize for at least 3.5ms before taking the FPMCU out of reset. We meet these timing requirements by splitting the sequence across bootblock, romstage and ramstage. On current Trogdor boards we measured <end of bootblock> to <end of romstage> at ~430ms and <end of romstage> to <start of ramstage> at 12ms, so we easily meet the required numbers this way. BRANCH=trogdor BUG=b:170284663 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iccd77e6e1c378110fca2b2b7ff1f534fce54f8ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/50504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-02-12mb/amd/majolica/devicetree: add CPU clusterFelix Held
Change-Id: I8d8b7f3ea2502e4e49a1290b07d84d5bbb2924a7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50506 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd: add and use fch_enable_hpet_decodeFelix Held
On Picasso we missed setting this bit in coreboot and since the default after reset is 0, we had to rely on the FSP to set this bit. Stoneyridge and Cezanne have the HPET decode enable bit in the same position in the same register. In the ACPI table entry written by southbridge_write_acpi_tables the HPET entry gets added, so we should make sure that we enable the decode. TEST=HPET still works on Mandolin. Change-Id: Ie98dae1d6036748f700f884d4b9653f2e59c24da Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50512 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd/common: add and use fch_enable_ioapic_decodeFelix Held
The default value of this bit is 0, so set it right before calling setup_ioapic to make sure that it's set and not to have to rely on FSP doing the right thing. Change-Id: Ife886451a6927965769282fc5644c2085abb9585 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50513 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd/cezanne: drop PWRS from GNVSFelix Held
A copy of Picasso's include/nvs.h was added to Cezanne right before the commit d6ccbb9d48f97dd3bbd4b947fe3bc4857216a363 that removed it for the other mainboards and SoCs, so apply the equivalent change here as well to keep everything in sync. Change-Id: I76b551c05b3c3028a3afb3bc3b77df2401aed7a8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-12soc/amd: Move MADT IRQ override settings into common_configRaul E Rangel
This is another common ACPI setting. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iefecabae1d83996a9a4aaadd2a53c2432441e1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50558 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd: Move fadt device tree settings into common_configRaul E Rangel
This is ACPI specific config that applies to all the AMD SoCs. Stoney doesn't currently use this, but we can add that functionality later. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0be7d917d7c5ba71347aa646822a883e2cf55743 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50557 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd: Move acpi_fill_mcfg into common/blocks/acpiRaul E Rangel
This is common between stoney, picasso, and cezanne. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5fb40e8c6817773212c5fbd66c5c06bd2bae1eda Reviewed-on: https://review.coreboot.org/c/coreboot/+/50556 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd: Move southbridge_write_acpi_tablesRaul E Rangel
This is common between all the chipsets. It's also required by common/block/lpc/lpc.c. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I361dfabfe0c04667a2c112955133831a985d5cc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-12mb/amd/majolica: Add FCH IRQ routingRaul E Rangel
I left most everything as NC since we don't expose the values to the OS yet. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7c3195ef27091f1bc61892c475ffe09137b63083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50511 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12soc/amd/cezanne: Add PCI IRQ Router definitionsRaul E Rangel
These definitions were identical to picasso. The only thing I changed was that I renamed Misc1 and Misc2 to HPET_L and HPET_H. This change still doesn't write the PCI_IRQ register for all the PCI devices. We need to refactor the picasso pci_gpp code first. TEST=Boot majolica and see FCH IRQs being programmed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic7e637f234d3af426959a9bbd82a0dcf25bb3c8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/50451 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/google/slippy: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Ifaedc39b683901b60abbb1d984f1d38c1ed364e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50542 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12nb/intel/haswell/pei_data.h: Define `SPD_LEN`Angel Pons
Change-Id: I34561372bcdd00b1b3e4dcd6be89fa47d2af9b42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50541 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12nb/intel/haswell: Drop unused function declarationAngel Pons
Change-Id: Ica612bcdac373ac013a877bb96b77b2a3f522f7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50540 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell boards: Correct USB config indentationAngel Pons
Change-Id: I72b717a41c5611cf578ce178722029b8646cbb35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50539 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell: Drop `mainboard_fill_pei_data`Angel Pons
Use global variables to provide mainboard USB settings, and have the northbridge code copy it into the `pei_data` struct. For now. To minimize diffstat noise, this patch does not reindent the now-global mainboard USB configuration arrays. This is cleaned up in a follow-up. Change-Id: I273c7a6cd46734ae25b95fc11b5e188d63cac32e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50538 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/msi/h81m-p33: Add new mainboardAngel Pons
This is a µATX mainboard with a LGA1150 socket and two DDR3 DIMM slots. Working: - Both DIMM slots - Serial port to emit spam - Some USB ports - Integrated graphics (libgfxinit) - DVI - Realtek GbE - All PCIe ports - At least one SATA port - RAM initialization with MRC binary - Flashing with flashrom - S3 suspend/resume - VBT - SeaBIOS 1.14 to boot Arch Linux (kernel linux-5.10.15.arch1-1) Broken: - Audio. It doesn't work on stock firmware either. I suspect the codec hardware on my board is dead. Untested: - PS/2 mouse - EHCI debug - Front USB headers - Non-Linux OSes - TPM header - VGA Change-Id: I9e47747a99c65e488487fbbcac1de15b9bf5c235 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41260 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12cpu/intel/haswell/acpi.c: Correct `get_cores_per_package`Angel Pons
CPUID result does not change when HyperThreading is disabled on HT-enabled CPUs, which breaks `generate_cpu_entries`. Use MSR 0x35 instead, which returns the currently-enabled core and thread count. Also rename the function to `get_logical_cores_per_package, which is more accurate. Based on commit 920d2b77f2 (cpu/intel/206ax/acpi.c: Fix get_cores_per_package). The MSR definition is the same for Sandy Bridge and Haswell. Change-Id: I5e1789d3037780b4285c9e367ff0e2b0d4365b39 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49099 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/google/volteer: Correct AT24 NVM address sizeDaniel Kang
Currently, the address size field of AT24 NVM is incorrect, and Linux v5.4 kernel logs the message below: at24 i2c-PRP0001:02: Bad "address-width" property: 13 The valid size of the AT24 NVM is 16 bits so modify the value from 0x0D to 0x10. BUG=b:177655681 BRANCH=none TEST=Boot volteer and check the kernel log and see "Bad address-width" error message is not shown. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ice6c3eac1e023b981217e1d7dc06587fc46b1a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bingbu Cao <bingbu.cao@linux.intel.com>
2021-02-12soc/amd/cezanne/smihandler: add psp_notify_smm callFelix Held
TEST=Majolica still gets to SeaBIOS. Like before this patch the PSP still has the recovery flag set in its return value, but we likely still have some problem in the amdfw part or miss some PSP initialization in FSP. Change-Id: I9f343452ef2ea6b01f9b2fd0cf6371218d046046 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-12soc/amd/cezanne: select RTCFelix Held
The RTC functionality will be used by elog. Change-Id: I3a8d0a353620f64207d5ba8e17c145090f0c7506 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 09:42:09 +0000