| Age | Commit message (Collapse) | Author |
|---|
|
Add the now coreboot standard MMIO read/write accessors that were
already defined for other architectures but not x86.
This leaves the old read/write{b,w,l} variants in place as was done
on the other architectures, presumably to support old payloads that
have not been updated.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=emerge-glados libpayload
CQ-DEPEND=CL:294711
Change-Id: I5ae3d755adcef0f6ff27aaa7c35a5b12ddc32e22
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: c09dd557050e3002fa5b8504980d72d4cb79a56c
Original-Change-Id: I58d928338335d3fe4bb7fe2bdc9c2967d8689118
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294565
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11405
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Seems like our transferred bytes calculation for OUT transfers that span
more than one packet had been wrong, and we just got lucky that we never
noticed it before. The HCTSIZ.xfersize register field we're reading only
counts bytes transferred by the last packet we sent.
OUT endpoints cannot have short transfers -- every transfer should
either finish all bytes we wanted to send or end in a proper error
condition. Therefore, in the absence of an error we can just conclude
that all input bytes have been transferred.
BRANCH=veyron
BUG=chrome-os-partner:35525
TEST=SMSC95xx netboot on Jerry now works.
Change-Id: I57349e697c428df6b56e2f6f62e87652ef1e7a94
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 0abee13b6d89dec12c6fff581ece1836393c7703
Original-Change-Id: Id0a127e6919f5786ba05218277705dda1067b8c3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293956
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Fix following compilation error.
LINK cbfs/fallback/verstage.debug
/bin/sh: verstage-objs: command not found
/usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/2.24/ld.bfd.real: warning: cannot find entry symbol stage_entry; defaulting to 00000000000d7000
BRANCH=chromeos-2015.07
BUG=none
TEST=emerge-oak coreboot
Change-Id: I30e4c43625b2d1d076f24e8c2639ce951839661b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2a8936cdf34d315f580819df682335b2998f044f
Original-Change-Id: I9afd57a5a868a348dff2c66cad0a8a09cdb2e911
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292557
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11402
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Need to save EmcBctSpare2 field to scratch register. Without it,
system may not resume from LP0 suspend.
BUG=chrome-os-partner:43797
BRANCH=none
TEST=able to suspend/resume >30 times on a known failed board
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 6d1623c4c791f79e097193dfbc4bc894ef63e230
Original-Change-Id: I53ebf8c4d4c7cd19827128a84fbd97a377d78ff7
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294765
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit ce38d902e889068d0068150c9352c2ecdb2f8815)
Original-Reviewed-on: https://chromium-review.googlesource.com/294864
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I2ff21afbe9278413033101877c2581df51913709
Reviewed-on: http://review.coreboot.org/11401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
GPIO(0, B, 3) and GPIO(7, C, 5) are not actually connected,
GPIO(0, B, 4) is named differently.
BUG=chrome-os-partner:43031
TEST=Rialto should still boot just fine, USB should still work
BRANCH=master
Change-Id: I11879385de6e9b57ac28bcae699333beb5a0d64c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a66bf1fd73ff8d15d4ec1a8f3602465941285c32
Original-Change-Id: Ib7d2baa6ed1ab38db786eb4d5e77316ad72cbfd4
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294713
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
TEST=Boot from veyron
BUG=None
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 6fe83821013954f0f2069598fd90a2d49de81101
Original-Change-Id: I68b105aa4bc3e82ef6a2421b127391e319c34d6e
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit c115d9a3ea2ca1cb62b2a1ee75996d8adb991d5d)
Original-jwerner: Added Minnie
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294763
Change-Id: I2bd6521c209db0e2d7d0bdb8ef2cde2715f321a6
Reviewed-on: http://review.coreboot.org/11399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Without this, the leds would be stuck to whatever the pullup/down states the
pins come with on rk3288.
Ready2_LED, an orange led, is one of the leds in this state.
This might confuse some users thinking there's an error.
Turn all of them on instead.
Later on depthcharge will use the same LEDs to indicate dev mode status.
BUG=chrome-os-partner:44274
BRANCH=master
TEST=Boot firmware without anything else, note all leds on
Change-Id: I5cf19aabd2a59a61699ef491ae11424cf5a0c874
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2e1a332a5653fb76bbf8fe624274ec64d2b443a5
Original-Change-Id: I4c4e8940dd9cf1ac0301ac00bfc5992ba16e1589
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294065
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11398
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
BUG=chrome-os-partner:43789
TEST=Mickey board, 640x480@60Hz display normally
Change-Id: Iea298302fe1124edbef157d1d81c12610402e9c7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 0209422efe52c45cab3c0d787b27352f63578e76
Original-Change-Id: Idf4c8cd9f2da3c5daa589973d831a506ff549b8b
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293994
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
only modify the MR3 value, there will always be some mickey not working properly.
After enable ODT, we use many mickey do tests, now functioning properly.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 681c169d59f5638d35b777eb2b7543e3b0dd90c8
Original-Change-Id: Ieb2b8a56054f91b6be81260e4c574425fb72fed3
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293324
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Original-Trybot-Ready: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-(cherry picked from commit 5397c2f32f5851b9f514b0bd2ae68999a77cabbf)
Original-Reviewed-on: https://chromium-review.googlesource.com/294126
Change-Id: Icb3c839bebebfcae54fc6e96e9958c7020d49eff
Reviewed-on: http://review.coreboot.org/11396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
do_dcsw_op is coded as a label, it's possible that linker will place
do_dcsw_op on unaligned address. To avoid this situation, we declare
do_dcsw_op as a function. Also explicitly set the 2nd argument of
ENTRY_WITH_ALIGN(name, bits) to 2.
do_dcsw_op:
cbz x3, exit
c103d: b40003e3 cbz x3, c10b9 <exit>
mov x10, xzr
c1041: aa1f03ea mov x10, xzr
adr x14, dcsw_loop_table // compute inner loop address
BRANCH=none
BUG=none
TEST=build and check do_dcsw_op in elf file
Change-Id: Ieb5f4188d6126ac9f6ddb0bfcc67452f79de94ad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4ee26b76089fab82cf4fb9b21c9f15b29e57b453
Original-Change-Id: Id331e8ecab7ea8782e97c10b13e8810955747a51
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/11395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When power is cut/restored to audio block, mbist workaround must be reapplied
or I2S will not function. Handle this in lp0 resume firmware with the rest of
the mbist WAR. This sequence for audio is also present in boot block code for
T210.
BUG=chrome-os-partner:41249
BRANCH=None
TEST=lp0 suspend/resume with audio playback
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 84933da8188f8263c19f38ba37e88e32ca46cb3d
Original-Change-Id: Ia6432e8556ee64f528d94f2dc3279b152294e132
Original-Signed-off-by: Christopher Freeman <cfreeman@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293618
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Tested-by: Anatol Pomazau <anatol@google.com>
Original-(cherry picked from commit 1e529c3e2ff929975fd654ef75396bc98d3b785c)
Original-Reviewed-on: https://chromium-review.googlesource.com/293886
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I3e72bc10f7e2bea2fa5f946e25803a7928ce9276
Reviewed-on: http://review.coreboot.org/11394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Due to HDMI need to set dclk_rate to 27Mhz, and we can't
caclu a suitable config paramters for this rate, so we
need to multiple rate unless the vco larger then VCO_MAX.
When NPLL rate multiple to 54MHz, pll_para_config could
caclu a right paramters, and I have verify the clock jitter
is okay to HDMI output.
Jitter Reports:
Dclk Rate NPLL Rate nr/no/nf jitter Margin
27MHz 54MHz 2/10/45 449.0ps +51.0%
BRANCH=None
BUG=chrome-os-partner:42946
TEST=Mickey board, show right recovery picture on TV,
and 480p clock jitter test passed
Change-Id: Iaa0a6622e63d88918ed465900e630bdf16fde706
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 59f1552026889f61167cfeaec3def668ba709c10
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Change-Id: Iab274b41f163d2d61332df13e5091f0b605cb65c
Original-Reviewed-on: https://chromium-review.googlesource.com/288416
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290331
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If an HDMI display is detected (EDID can be read), set the
display mode to 480p. If for some reason 480p is not supported
then we'll fall back to the automatically detected display mode.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=dev mode screen shows up on Mickey at 480p resolution
Change-Id: I2c431eff6673392d3c09e1b66c66ba12ecc6eeb0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 76203a683c4501f368c50fe24101f68746ddb7f0
Original-Change-Id: I90dea37daa2d78628230d7d47f7ef0e917cbd7bb
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290554
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Assume that HDMI implies usage of an external display, and that we
want to try bringing up display if we can read an EDID.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=none; need a display with corrupt EDID to test with
Change-Id: I11cc61140d905d70798a7b46db7847f3a1b3c886
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ace7773623eac57f068ecd50baa9108ce028cf1b
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9e22984a98b1a5f8cd9645b92dc9b87e8d968f01
Original-Reviewed-on: https://chromium-review.googlesource.com/293548
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch will let you to choose a favourite mode to
display, while not just taking the edid detail timing.
But not all modes are able to set, only modes that
are in established or standard timing, and we only
support a few common common resolutions for now.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=tested dev mode on Mickey at 640x480@60Hz
Change-Id: I8a9dedfe08057d42d85b8ca129935a258cb26762
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 090583f90ff720d88e5cfe69fcb2d541c716f0e6
Original-Change-Id: Iaa8c9a6fad106ee792f7cd1a0ac77e3dcbadf481
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289671
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This ensures the output buffer is initialized before exiting
decode_edid() so that if the return value is ignored in higher-level
logic (like when dealing with external displays) we don't leave
the struct filled with garbage.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=none
Change-Id: I557e2495157458342db6d8b0b1ecb39f7267f61f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: bb12dca133576543efa4d3bcc9aadf85d37c8b71
Original-Change-Id: I697436fffadc7dd3af239436061975165a97ec8c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293547
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11389
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are serveral members of the edid struct which are never used
outside of the EDID parsing code itself. This patch moves them to a
struct in edid.c. They might be useful some day but until then we can
just pretty print them and not pollute the more general API.
BUG=none
BRANCH=firmware-veyron
TEST=compiled for veyron_mickey, peppy, link, nyan_big, rush, smaug
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I660f28c850163e89fe1f59d6c5cfd6e63a56dda0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ee8ea314a0d8f5993508f560fc24ab17604049df
Original-Change-Id: I7fb8674619c0b780cc64f3ab786286225a3fe0e2
Original-Reviewed-on: https://chromium-review.googlesource.com/290333
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11387
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The value of 0x4 (60 Ohm) apperas to be causing lots of problems.
Since 0x1 (34.3 Ohm) was _almost_ right, let's try 0x2 (40 Ohm) and
hope it's the sweet spot.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 06db96e00d39972edbaf8429cbe88bbc66804e15
Original-Change-Id: If8b7d51d058ae000c0af189a648c62fa38a872ac
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291121
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit 0dabadca1ab3bb310f85646d020bdcf672014071)
Original-Reviewed-on: https://chromium-review.googlesource.com/291291
Change-Id: Id32790c894c09616e32503aa790fa294093eca8a
Reviewed-on: http://review.coreboot.org/11386
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This basically does the same thing for firmware what CL:290631
did in the kernel. We want to keep the modem off until it needs
to be used to avoid enumeration/detection issues.
BUG=chrome-os-partner:43271
BRANCH=none
TEST=needs testing
Change-Id: I3b63a77c732dc4895b728b30f1dd71210a9c0e90
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a90ccd7fbffe44abe05e96341cc77067442c85e4
Original-Change-Id: I3516de1ea9160f7186ad7f5fb3b5d29ac73143b5
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290890
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: http://review.coreboot.org/11385
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The NV security team requested that coreboot allocate a 128MB
region in SDRAM for VPR (Video Protection Region). We had
previously just disabled the VPR by setting BOM/SIZE to 0.
Once allocated, the VPR will be locked from further access.
The ALLOW_TZ_WRITE_ACCESS bit is _not_ set, as dynamic VPR config
is not supported at this time (i.e. trusted code can _not_ remap
or resize the VPR).
BUG=None
BRANCH=None
TEST=Built and booted on my P5 A44. Saw the VPR region in the
boot spew (ID:3 [f6800000 - fe800000]). Dumped the MC VideoProtect
registers and verified their values.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a7481dba31dc39f482f8a7bfdaba1d1f4fc3cb81
Original-Change-Id: Ia19af485430bc09dbba28fcef5de16de851f81aa
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290475
Original-Reviewed-by: Hyung Taek Ryoo <hryoo@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Hridya Valsaraju <hvalsaraju@nvidia.com>
Original-(cherry picked from commit 9629b318eb17b145315531509f950da02483114f)
Original-Reviewed-on: https://chromium-review.googlesource.com/291095
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I19a93c915990644177c491c8212f2cf356d4d17d
Reviewed-on: http://review.coreboot.org/11384
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BL31 makes an assumption that TZDRAM always starts at its base. This
was not true in our case since coreboot page tables were located
towards the start of TZDRAM. Instead move page tables to the end, thus
satisfying the assumption that BL31 base is the base of TZDRAM as
well.
BUG=chrome-os-partner:42989
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: aabed336da6e9aea426650c5ca5977ccfc83a21b
Original-Change-Id: Ic4d155525dbb4baab95c971f77848e47d5d54dba
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291020
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit a57127f1655ef311b82c41ce33ffc71db5f9db35)
Original-Reviewed-on: https://chromium-review.googlesource.com/290987
Change-Id: Ie7166fd0301b46eb32f44107f7f782c6d79a278c
Reviewed-on: http://review.coreboot.org/11383
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:42989
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ff42f0b4e7f81ea97e571ec03adac16b412e4a37
Original-Change-Id: If78857abfb9a348433b8707e58bea1f58416d243
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291021
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit 68eeb4bb4b817184eb42f4ee3a840317ede07dae)
Original-Reviewed-on: https://chromium-review.googlesource.com/290988
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: Id555198bc8e5d77f8ceee710d1a432516bd1ae4c
Reviewed-on: http://review.coreboot.org/11382
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The NV security team requested that coreboot allocate the NVDEC
and TSEC carveouts. Added code to set up NVDEC (1 region, 1MB)
and TSEC (2 regions, splitting 2MB), and set their lock bits.
Kernel/trusted code should be able to use the regions now.
Note that this change sets the UNLOCKED bit in Carveout1Cfg0
and Carveout4Cfg0/5Cfg0 (bit 1) to 0 in the BCT .inc files
(both 3GB and 4GB BCTs) so that the BOMs can be written.
Any future revisions to these BCT files should take this
into account.
BUG=None
BRANCH=None
TEST=Built and booted on my P5 A44. Saw the carveout regions
in the boot spew, and CBMEM living just below the last region
(TSEC). Dumped the MC GeneralizedCarveoutX registers and
verified their values (same as BCT, with only BOM/CFG0 changed).
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a34b0772cd721193640b322768ce5fcbb4624f23
Original-Change-Id: I2abc872fa1cc4ea669409ffc9f2e66dbbc4efcd0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290452
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit f3bbf25397db4d17044e9cfd135ecf73df0ffa60)
Original-Reviewed-on: https://chromium-review.googlesource.com/291081
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I924dfdae7b7c9b877cb1c93fd94f0ef98b728ac5
Reviewed-on: http://review.coreboot.org/11381
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Struct edid defien pvsync & phsync as an character,
like '+' or '-', so we need to check sync polarity
by comparing with characters '+' and '-' instead of
treating as boolean.
BRANCH=None
BUG=chrome-os-partner:42946
TEST=Mickey board, light monitor normally
Change-Id: I92d233e19b6df8917fb8ff9a327ccb842c152d65
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2d22d4b6e7108474f67200e0fb1e4894cd88db85
Original-Change-Id: I14c72aa8994227092a1059d2b25c1dd2249b9db1
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/289963
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11380
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It doesn't hurt to expose declarations. Instead of
a compile-time error there'll be a link error if someone
tries to malloc() anything.
Change-Id: Ief6f22c168c660a6084558b5889ea4cc42fefdde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11406
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Do not guard the inclusion of "drivers/intel/gma/int15.h"
and "arch/interrupt.h" with configs that control option rom execution.
These headers already have the proper guards. The
install_intel_vga_int15_handler() is unconditionally called, even when
the header that declares it is guarded out.
Change-Id: Ia273437486f5802aa2b53212f2a1b5704c9485fa
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11379
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have tons of file types now that can be safely extracted.
It's pretty much only stages and payloads that aren't.
Change-Id: Ibf58a2c721f863d654537850c6f93d68a8a5bbeb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
cbfstool create doesn't accept alignment configuration anymore.
Change-Id: Idbf7662c605aa78e3d3413a21bfcbc1387f28701
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11358
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's already present inside struct cbfs_file
Change-Id: Ic9682e93c3d208e2ed458940e4a9f9f5a64b6e98
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11333
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's already present inside struct cbfs_file
Change-Id: Ib10663c6601aa02e07b868e440f05da02af9c2d9
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11332
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
My concern was that compilers may something stupid under the assumption
of a fixed struct size, but filename is already variable, so things are
okay.
Change-Id: I5348faf68f0a7993294e9de4c0b6c737278b28af
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iea5377af735b06bcaefb999547a8896b1c70763a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11330
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
They're passed as part of the header now.
Change-Id: I7cd6296adac1fa72e0708b89c7009552e272f656
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11327
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This seems like more of a debug option, than something that should
be forced to be enabled by the platform. Since it's causing a Kconfig
warning, I'm just removing it.
The alternative to removing it would be to add dependencies on
CONSOLE_CBMEM && !CONSOLE_SERIAL
Change-Id: Ifc4e4cbeea08a503c38827dd75e0e2e78e8a5eda
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11343
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The acpi_fill_ssdt_generator function pointer is evaluated for
each device. As there are multiple cpus in the system the
acpi_fill_ssdt_generator was being called more than once creating
duplicate ACPI entries because there was more than 1 cpu device.
Fix this by only generating them once by removing the
acpi_fill_ssdt_generator for the cpu devices, but add the
generator to the cpu cluster device.
BUG=chrome-os-partner:44084
BRANCH=None
TEST=Built and booted on glados. Noted ACPI entries only generated once.
Original-Change-Id: I695c30e6150f6d3a79d13744c532f1b658b10402
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294240
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Change-Id: I7c85f44ba65398bda668e13db8be531535a983c5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11285
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This pach enables memory configuration based on PCH_MEM_CFG
and EC_BRD_ID.
BRANCH=None
BUG=chrome-os-partner:44087
CQ-DEPEND=CL:293832
TEST=Build and Boot FAB3 (Kunimitsu)
Original-Change-Id: I7999e609c4b0b3c89a9689ee6bb6b98c88703809
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293787
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I52a1af1683b74e5cad71b9e4861942a23869f255
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Reviewed-on: http://review.coreboot.org/11284
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The prior implementation of PAD_CFG_GPI kept the pad
ownership as ACPI. The gpio driver in the kernel then
wouldn't allow one to export those GPIOs through sysfs
in /sys/class/gpio. Fix this by setting the ownership
to GPIO.
BUG=chrome-os-partner:44147
BRANCH=None
TEST=Built and boot glados. PCH_WP gpio is properly exported
by crossystem.
Original-Change-Id: I9fc7ab141a3fd74e0ff8b3ff5009b007b8a0d69b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294081
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ifbb61c5d64bb6a04f140685c70f4681e2babecef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11283
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Move all the various places that look at board specific GPIOs into
the mainboard gpio.h so it can be easily ported to new boards.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados p2
Original-Change-Id: I3f1754012158dd5c7d5bbd6e07e40850f21af56d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I93c4dc1795c1107a3d96e686f03df3199f30de8a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11282
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Implement the required Chrome OS specific handlers to read the
recovery mode, clear the recovery mode, read the lid switch state,
and read the write protect state using the appropriate methods.
Also update the Chrome OS ACPI device to use the GPIO definitions
that are exposed now by the SOC.
BUG=chrome-os-partner:43515
BRANCH=none
TEST=build and boot on glados and successfully enter recovery mode
Original-Change-Id: Ifd51c11dc71b7d091615c29a618454a6a2cc33d7
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293515
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia6ef83a80b9729654bc87bb81bd8d7c1b01d7f42
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a helper function to read the EC switch state on LPC based
ECs instead of having each board need to understand and use the
specific EC LPC IO method that is required.
BUG=chrome-os-partner:43515
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: Id046c7ddf3a1689d4bf2241be5da31184c32c0e1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293514
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id11009e0711b13823e4f76dc9db9c9c20abf4809
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11280
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The part number was the same as the H9CCNNNBLTLAR which means it
is not possible to distinguish the two based on part number alone.
This breaks mosys and thus the factory tests.
BUG=chrome-os-partner:43514
BRANCH=none
TEST=boot on glados P2 SKU3 and verify memory reported by mosys
Original-Change-Id: I606ef3989bd7273d134a258bc933088ccc865542
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293513
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7cea7cc4c61a20fda47673c8e25c431d391aa3bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11279
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the ELAN touchscreen device in ACPI to bind it to the I2C
device at bus I2C0, address 0x10, interrupt 31 (GPP_E7).
BUG=chrome-os-partner:43514
BRANCH=none
TEST=boot on glados P2 and see touchscreen initialized by kernel
Original-Change-Id: I23b071b2767547baed239c94216cda6162d045dd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293512
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8a9492e6fa1f650cef0871329ae8944caffdaf5a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11278
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clean up the device code for the glados mainboard, using
the defined values for interrupts by the SOC and moving the
various codec i2c addresses to the top of the file.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: Iead1aeb54363b15a6176d4f4a9511674195c0505
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293511
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I083c9ef6140e20a433cb2017e4c3cbc7a41e8fed
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11277
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
this patch enables SMBus in device tree for kunimitsu board.
BRANCH=none
BUG=none
TEST=built for kunimitsu; booted on kunimitsu fab3 and verified with
lspci
Original-Change-Id: I3b2b8c202b71c2a0c602169841978ed0c4d8bf8d
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292971
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id20e6cafda8664bd0ae3a5acecdd66c58c220694
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11276
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BRANCH=None
BUG=chrome-os-partner:44087
TEST=Build and Boot kunimitsu.
Original-Change-Id: I30ba8bad69a4fdf8ec29f9eb43a27d2e1c6b93dd
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293832
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8f85547865387091c9a6400611e3314f457076d5
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Reviewed-on: http://review.coreboot.org/11275
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patche enables the deep S5 and disables Deep S3.
Kunimitsu does not resume from deep S3. This change will
unblock the S3 resume path on kunimitsu board.
BRANCH=None
BUG=chrome-os-partner:42331
TEST=Built and booted on kunimitsu; check s3 works.
Original-Change-Id: Ia828a39bceef615fd194bb3614ba2de87c3af805
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291250
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I07b95a324a27ab658e80674686b47b86412ea097
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11274
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
RISCV requires a trap handler at the machine stage to deal with
misaligned loads/stores, as well as to deal with calls that a linux
payload will make in its setup. Put required assembly for jumping
into and out of a trap here to be set up by the bootblock in a later
commit.
Change-Id: Ibf6b18e477aaa1c415a31dbeffa50a2470a7ab2e
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11367
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Replace usage of u<bitness> types with proper uint<bitness>_t types.
Change-Id: I8359d70304a138b29bfc1358af77af26b2bc8682
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Reviewed-on: http://review.coreboot.org/11364
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With VIRTUAL_DEV_SWITCH moved under 'config CHROMEOS' in all of the
mainboards, this is no longer needed.
Change-Id: I5fbea17969f6b0c3b8a5dcd519ab9d36eb2ad6f1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11337
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and
VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the
mainboards that use them.
Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
AMD family 10 boards don't use QRANK_DIMM_SUPPORT.
Change-Id: Id7e1fba86e2ea1d4d5f5c2e123bd36ad802fd15e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11344
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Add 'select MAINBOARD_HAS_NATIVE_VGA_INIT' which is just used as a gate
symbol to display MAINBOARD_DO_NATIVE_VGA_INIT to the mainboards that
are already selecting MAINBOARD_DO_NATIVE_VGA_INIT.
Since MAINBOARD_HAS_NATIVE_VGA_INIT is not used in any code, this should
not have any other effects.
This fixes the warning:
warning: (BOARD_SPECIFIC_OPTIONS) selects MAINBOARD_DO_NATIVE_VGA_INIT
which has unmet direct dependencies (VENDOR_ASUS && BOARD_ASUS_KFSN4_DRE
|| MAINBOARD_HAS_NATIVE_VGA_INIT)
Change-Id: I8ceee69ebae90dc32f55df58c2e80fe25397f049
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The header is now created before the "converters" are run.
Adding new capabilities (and fields to the header) will happen there,
so we're close.
Change-Id: I0556df724bd93816b435efff7d931293dbed918f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11326
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These functions can do all kinds of things, such as converting an ELF
image into SELF, or (in the future) compress or checksum entire files.
This may require changing or adding fields to the header, so they
need to have access to it.
The header_size parameter that was provided (but never used) is
equivalent to cbfs_file's offset field.
Change-Id: I7c10ab15f3dff4412461103e9763a1d78b7be7bb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's sole use was comparing it to the header's "len" field.
Change-Id: Ic3657a709dee0d2b9288373757345a1a56124f37
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11324
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I9a0aad42e4eb67a07c939d7cfa0d2d80838412bb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11323
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
->len used to be set to the file data length plus the size of the
padding used for the cbfs_file header. This isn't the case anymore,
so no patching of this field is necessary anymore.
->offset still needs to be patched in that case because its final
value can only be determined when the file's actual location is known.
Change-Id: I1037885f81b4ed3b68898dd7d0e515cf7a9c90a8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11322
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie4edc5f9c96ffba7dcf8b974c56851658b9538e4
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11321
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Up to now cbfstool creates the cbfs_file header at the latest possible
time, which is unsuitable when the idea is to add further fields to it
that need to be configured earlier.
Thus, have it ripple up the call chain.
Change-Id: I7c160681c31818bc550ed2098008146043d0ee01
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11320
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
"target", for what? It's the offset where the file header of the currently
added file will be located, name it as such.
Change-Id: I382f08f81991faf660e217566849773d9a7ec227
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11319
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
binutils riscv patches
Followup-To: I6f37748b4cf0852d292f8f5156fc27ab8fd481b6
Change-Id: Ib6599b2380b5f2efd92ae78b72b45f3d65681379
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/11329
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Refactor the code to be better understandable.
Change-Id: Ia815a27f7cc83c226a32e87485d712a5fbf4168e
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Kconfig symbol CACHE_MRC_BIN was getting forced enabled everywhere
it existed.
Remove the Kconfig symbol and get rid of the #if statements
surrounding the code.
This fixes the Kconfig warning for Haswell & Broadwell chips:
warning: (NORTHBRIDGE_INTEL_HASWELL &&
NORTHBRIDGE_INTEL_SANDYBRIDGE &&
NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE &&
NORTHBRIDGE_INTEL_IVYBRIDGE &&
NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE &&
CPU_SPECIFIC_OPTIONS) selects CACHE_MRC_BIN
which has unmet direct dependencies
(CPU_INTEL_SOCKET_RPGA988B || CPU_INTEL_SOCKET_RPGA989)
Change-Id: Ie0f0726e3d6f217e2cb3be73034405081ce0735a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11270
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In testing other localization changes, I found that I couldn't build
anymore because xcompile wasn't picking up my toolchain. I traced it
to the regex comparison of '.*format \(.[a-z0-9-]*\)' to the string
'formato del fichero elf32-i386'. Forcing the localization of
objdump to C before doing the comparison fixes the issue.
Change-Id: I6bed5a9824807dd5bc5a38b711ab47e2af4b0c29
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11304
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
There doesn't seem to have been an olddefconfig target in the coreboot
version of the Kconfig makefile. It's listed in the .PHONY, but it
doesn't seem like it's ever been there. This is useful for expanding
a miniconfig saved with 'make savedefconfig'.
Change-Id: I3798f8469135b58d32da68d4b0e434ab5351b501
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11273
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When the check for global symbols in romstage happens, if everything is
good, a warning appears, telling us that the segment is empty. While the
empty segment is good, the warning is distracting:
"BFD: build/cbfs/fallback/romstage_null.debug: warning: Empty loadable
segment detected, is this intentional ?"
This change hides that particular warning, but shouldn't hide any other
output from objcopy.
Change-Id: If22489280712d02a61c3ee5e0cb2a53db87d6082
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11302
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Some patch implementations (eg. BSD) create new files by taking the "---" file
name instead of the "+++" one, so set both to the file name that is to be
created.
Change-Id: I6f37748b4cf0852d292f8f5156fc27ab8fd481b6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reported-by: Idwer Vollering <vidwer@gmail.com>
Reported-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/11303
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The AMD K8 northbridge uses the Kconfig symbol QRANK_DIMM_SUPPORT,
but the symbol was used on a number of Family 10 boards as well.
AMD Family 10 doesn't use this Kconfig symbol for anything.
I verified that the symbol wasn't used actually getting used in any
of these platforms.
Fixes Kconfig warnings for these 19 mainboards:
warning: (BOARD_SPECIFIC_OPTIONS...) selects QRANK_DIMM_SUPPORT which
has unmet direct dependencies (NORTHBRIDGE_AMD_AMDK8)
Change-Id: I454992a4975566fd6439a21f5a800d0cfa1b4d3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11300
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Add CHROMEOS dependencies to selects for the following Kconfig
symbols:
CHROMEOS_RAMOOPS_DYNAMIC
CHROMEOS_RAMOOPS_NON_ACPI
CHROMEOS_VBNV_CMOS
CHROMEOS_VBNV_EC
CHROMEOS_VBNV_FLASH
EC_SOFTWARE_SYNC
LID_SWITCH
RETURN_FROM_VERSTAGE
SEPARATE_VERSTAGE
VBOOT_DISABLE_DEV_ON_RECOVERY
VBOOT_EC_SLOW_UPDATE
VBOOT_OPROM_MATTERS
VBOOT_STARTS_IN_BOOTBLOCK
WIPEOUT_SUPPORTED
This gets rid of these sorts of Kconfig errors:
warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has
unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS)
Note: These two boards would never actually have CHROMEOS enabled:
intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out
google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS
Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The FSP platforms use CACHE_MRC_SETTINGS without setting HAVE_MRC,
which caused a Kconfig warning. Since CACHE_MRC_SETTINGS doesn't really
depend on HAVE_MRC anymore, remove the dependency in Kconfig.
Fixes Kconfig warnings:
warning: (CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS
&& CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS)
selects CACHE_MRC_SETTINGS which has unmet direct dependencies
(SOC_INTEL_BROADWELL && HAVE_MRC || SOC_INTEL_COMMON && HAVE_MRC)
Change-Id: Id1c108f73d19cbd53b91e1671d57e7752be5d96d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11288
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
It still needs to pass --32 (yes, 32) to the assembler.
x86_64-linux does this (through some other config file),
x86_64-elf did not.
This fixes building SeaBIOS with our x86_64-elf multilib compiler.
Change-Id: Ibe2a70e46e64e71c947482be5ec0eaf7f7bf300d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11289
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig.
That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I
find this being used wrong.
Why is this confusing/so hard to get right?
Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11290
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All compilers built, incl. x86_64-elf as multilib and riscv-elf.
Change-Id: Iafa61b1d2ffc9c737ab67a417c62417593b69372
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10975
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If I wanted to fill the whole memory address space with one byte, I
wouldn't try it that subtle.
With size_t beeing unsigned the loop condition >= 0 was always true.
Change-Id: Idee6a4901f6697093c88bda354b5e43066c0d948
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11286
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Store the payload config and version files in CBFS if using a
SeaBIOS or filo payload if INCLUDE_CONFIG_FILE is enabled.
Change-Id: I0c1b4da8f6179b9cee06cecfa76bc631b43196e0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10607
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
cbmem_top was using CHIPSET_RESERVED_MEM_BYTES to w/a unknown memory
regions reserved by fsp for chipset use. With that being removed, the
function needs to properly walk though the memory map resulted from fsp
memory init to find out the usable address for cbmem root.
Refer the FSP 1.3.0 Integartion guide for more details on the Memory
Map.
systemagent should also use the same mechanism to create the reserved
RAM resource.
BRANCH=None
BUG=None
TEST=Build and Boot kunimitsu (FAB3)
CQ-DEPEND=CL:*226035,CL:*226045,CL:291573
Original-Change-Id: Id0954cf8e6388e549c7d4df67b468572b5bea539
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291611
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com>
Change-Id: I4e716170f40936081ce9d4878bf74c75f469f78d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: http://review.coreboot.org/11239
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update the MemoryInit and SilicoInit params as per
FSP 1.3.0 release.
Note: add SvGv and Rmt to Upd.
BRANCH=None
BUG=None
TEST=Build and Boot FAB3 (Kunimitsu)
CQ-DEPEND=CL:*226035, CL:*226045
Original-Change-Id: I62000f6a485fee42ef733c3b548192f2bedfce49
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291573
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Change-Id: Iaafa658b4e710fe512526a521cf6c529efb19bf0
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11238
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
(1) Wifi is connected on RP1 which is 1c.0 , so enabling
1c.0 and disabling 1d.0
(2) kepler is on RP5 which is 1c.4, so enabling it
(3) enabling ClkReqSupport for RP1 and RP5 so that L1 substates can
get enabled.
BRANCH=None
BUG=chrome-os-partner:43738
TEST=Built and boot for Kunimitsu. checked all PCIe powersaving
states (LTR, L1, L1S) are enabled
Original-Change-Id: I525661399d1a4d939b53d5ed5f7991598b84ddcd
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293482
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ib9a771a6ec137217668fb0385efc13b1824772b4
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/11237
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Check device connect status while waiting for usb transfer complete
Avoid coreboot get stuck when usb device unplugged
BUG=chrome-os-partner:35525
TEST=None
BRANCH=None
Original-Change-Id: Id103501aa0d8b31b0b81bef773679c0fad79f689
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292630
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292966
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Change-Id: I49396b74131dbfda505d9d3de5adbdc87eb92ce1
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11236
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The skylake IO-APIC supports up to 120 redirection entries.
In practice it seems FSP has already written to this write-once
register. However, it doesn't hurt to actually be correct within
the source.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I666b1b6034f0d37a37ea918f802317f9d5f15718
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293251
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I6ddbc89c98c262e2dd0f9f0b76adb092d3043602
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11235
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The skylake SoC code now has macros for the previously
hard-code numbers for IRQs and GPEs. Switch over to using
those as they bring a little more clarity.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ic8fcc59d680cdddec9dfbc3bf679731f6d786793
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I594907005372100a3c9d17dda9d17769844ad272
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11234
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
One thing that is brittle is lining up GPE0 bits in ASL
and with a board's design proper. This results in open
calculated magic numbers. To help alleviate this provide
just #defines that C preprocessor can use before handing
the source off to the ASL compiler.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados. Everything's intact.
Original-Change-Id: I359616ebe4bfc83c05bafe0ca36b766efd16dcca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293410
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I32513c324b923fa0adbd6a0ee920c27e9b97dd1b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11233
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables the root ports and configures
the clock req numbers as per the design
On kunimitsu FAB3 board with D0 MCP
Root port 1 --> Wifi card --> clkreq 1
Root port 4 --> Kepler VP8/VP9--> clkreq 2
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for Kunimitsu and Boot Kunimitsu board with D0 MCP
Original-Change-Id: I4e110d2d07efbfa7a306852301cd1cd89027b2ba
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290051
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Change-Id: I6d66c78496ac3f43e07d96feefed35cf50da6aa1
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Reviewed-on: http://review.coreboot.org/11232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the mainboard.asl file to support
Kunimitsu FAB3 board which is based on SKL D0 MCP.
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for kunimitsu; booted on kunimitsu FAB3 with D0 MCP
Original-Change-Id: I31a315740d49125591591b20c296babe49004166
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290050
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I81c22e407d1b3d420744eaf1d3f7ff4e8e749bcb
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11231
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the GPIO table to support Kunimitsu FAB3
variant, based on SKL D0 MCP.
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for kunimitsu; booted on kunimitsu with D0 MCP.
Original-Change-Id: I2343187a919f6d29161069135d97484191198056
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/289939
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I47302062788a90550fd38cb113e418b21d3f756c
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11230
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The get_region() function was using fixed masks for
the base and limit. However, newer descriptors (on
skylake, e.g.) use a 15-bit mask -- not a 12-bit one.
Choose the right mask based on ifd_version.
BUG=chrome-os-partner:43461
BRANCH=None
TEST=Built glados bootimage.
Original-Change-Id: Ibcbfd649a561d36b17ea2cc8fbeb30ffdbbb2c96
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293250
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I7f2ef9fb8e5b6c7114225fecc2798668d6507ac3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11229
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The descriptor format has changed with Skylake and some fields have
moved or been expanded.
This includes new SPI frequencies and chip densities, though unfortunately
30MHz in the new format conflicts with 50MHz in the old format...
There are also new regions with a few reserved regions inserted before
a new embedded controller region.
Unfortunately there does not seem to be a documented version field
so there does not seem to be an official way to determine if a
specific descriptor is new or old. To work around this ifdtool
checks the hardcoded "SPI Read Frequency" to see if it set for
20MHz (old descriptor) or 17MHz (new descriptor).
BUG=chrome-os-partner:40635
BUG=chrome-os-partner:43461
BRANCH=none
TEST=run ifdtool on skylake and broadwell images
Original-Change-Id: I0561b3c65fcb3e77c0a24be58b01db9b3a36e5a9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/281001
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9a08c26432e13c4000afc50de9d8473e6f911805
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/293240
Reviewed-on: http://review.coreboot.org/11228
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The location of the AMD ROMSIG binary was being checked and warnings
were being printed even when the ROMSIG file wasn't being used.
These false warnings are avoided by moving the warnings into the
block where the CBFS file for the ROMSIG is generated.
Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11161
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Commit 27baa32 (cpu/amd/model_10xxx: Do not initialize SMM memory if
SMM is disabled) deactivated TSeg SMRAM, which had the side effect
of routing legacy VGA memory access to DRAM. Restore the correct
MMIO mapping via the MMIO configuration registers.
TEST: Booted KGPE-D16 with nVidia 7300LE card and verified proper VGA
functionality.
Change-Id: Ie4b7c0b2d6f9a02af9a022565fe514119513190a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11240
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Broadwell and Skylake chipsets, along with a few mainboards were
selecting ALWAYS_LOAD_OPROM without making sure that the dependency
for that symbol was met as well.
Looking at the dependencies for VGA_RUN_ROM, we see:
PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT
Since ARCH_X86 selects PCI, that's always met here.
Since Broadwell and Skylake don't have native VGA init yet, that's
not needed.
- Make sure that VGA_RUN_ROM is selected as well.
- Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and
VGA_RUN_ROM symbols where they're selected.
Fixes Kconfig warning for these boards and chipsets:
warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS &&
BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS)
selects ALWAYS_LOAD_OPROM which has unmet direct dependencies
(VGA_ROM_RUN)
Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change the dependency on CONSOLE_SERIAL to select CONSOLE_SERIAL based
on this question.
The dependency was causing multiple warnings on every platform tested.
src/console/Kconfig:21:error: recursive dependency detected!
src/console/Kconfig:21: symbol CONSOLE_SERIAL depends on
DRIVERS_UART_8250MEM
src/drivers/uart/Kconfig:16: symbol DRIVERS_UART_8250MEM is selected by
UART_DEBUG
src/soc/intel/skylake/Kconfig:198: symbol UART_DEBUG depends on
CONSOLE_SERIAL
Change-Id: Ia0426cd150561694081b5ea7c6797d36022c1f57
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11243
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
When the user's primary group contains a space ls -l and awk get the
wrong value for the file size. This results in padding the
coreboot_psp_directory_combine_pubkey.bin file too much which ultimately
means RtmPubSigned.key can not be placed at the necessary offset.
Changing from ls -l to ls -ln seemed like the most minimal,
POSIX-friendly way to effect this change.
Change-Id: Icbeaad476753924626adb6de53dc9a30052d91a6
Signed-off-by: Dan Christensen <opello@opello.org>
Reviewed-on: http://review.coreboot.org/11242
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
seabios integration interprets the CC variable with a special case when
ccache is prepended to the compiler.
Since the integration also tries to extract compiler flags (which I'm
not sure we still add to CC _ever_), that also needs to look at only
the part of the string that contains compiler and (maybe) flags, so
skip the first word if it was determined to be the path to the ccache
binary.
Change-Id: I717863f456bf4fd6f08427d86633079ecda039df
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I5d0c95af7d35115b5ac4141489caceef4ee1c8bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11088
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix the remark below for the mainboards qemu-i440x and qemu-q35.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20150717-32
Copyright (c) 2000 - 2015 Intel Corporation
dsdt.aml 336: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
ASL Input: dsdt.aml - 399 lines, 16756 bytes, 245 keywords
AML Output: dsdt.aml - 4000 bytes, 146 named objects, 99 executable opcodes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 233 Optimizations
Change-Id: Ibe48f872768ab8295d6fed3359d9eef04b736a05
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11162
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order for the EC_SCI_L to work the GPE0 route needs
to be set along w/ the GPE event for the EC. As the GPE0
route is dynamic the EC_SCI_GPI needs to be set along
with the route so everything lines up. In this case, the
GPE0 route is set to the defaults such that GPP_C, GPP_D,
and GPP_E are routed to GPE0 block 0, 1, and 2, respectively.
This works out for glados because the EC_SCI_L is connected
to GPP_E16.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts
is incrementing as well as /sys/firmware/acpi/interrupts/gpe50.
Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/292011
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11210
Tested-by: build bot (Jenkins)
|
|
Set the EC_SMI_GPI define to be GPP_E15 and route that
GPIO for SMI generation. Also, the mainboard_smi_gpi_handler()
was introduced on skylake in order to process any GPI that could
generate an SMI. Switch to this handler so one can process the
appropriate events.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Used 'lidclose' on EC command line during depthcharge
to confirm EC_SMI_L generates SMI and shutdown happens.
Original-Change-Id: Ia365b86161670a809e3fa99dde38fccc612d5e77
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291934
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic16ea8e8d6ff564977ed2081d2353c82af71adea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11209
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current construction for processing SMI GPI events
didn't allow for the mainboard to query the state of a
particular GPI for the snapshotted SMI event. The
skylake part can route GPIs from any (there are design
limitations) GPIO group. Those status and enable registers
are within the GPIO community so one needs to gather
all the possibilities in order to query the state.
The call chain did this:
southbridge_smi_gpi(
clear_alt_smi_status() -> reset_alt_smi_status() ->
print_all_smi_status() -> return 0)
As a replacement the following functions and types are
introduced:
struct gpi_status - represent gpi status.
gpi_status_get() - per gpi query on struct gpi_status
gpi_clear_get_smi_status() - clear and retrieve SMI GPI status
mainboard_smi_gpi_handler() - mainboard handler using gpi_status
Also remove gpio_enable_all_smi() as that construct was never
used, but it also is quite heavy handed in that it would
enable SMI generation for all GPIs.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built.
Original-Change-Id: Ief977e60de65d9964b8ee58f2433cae5c93872ca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291933
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ida009393c6af88ffe910195dc79a4c0d2a4c029e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11208
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
