Age | Commit message (Collapse) | Author |
|
Change-Id: Ic1d407eab8ec4569e02729afb5c71f39ce174401
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68815
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as kano is using a converged firmware image.
BUG=b:253337338
BRANCH=firmware-brya-14505.B
TEST=Cherry-pick Cq-Depends, then "FW_NAME=kano emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
disable hardware write protect and software write protect,
flash and boot kano in end-of-manufacturing mode to kernel.
Cq-Depend: chrome-internal:5046060, chromium:3967356
Change-Id: I75da3af530e0eafdc684f19ea0f6674f6dc10f01
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The Atlas board has currently the problem that suspending the System
causes the System to freeze. Therefore disable S3, until the cause is
figured out and fixed.
Change-Id: I5b28787df9b01683fcd4a1de8267840a80bb4fe6
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68591
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves DRIVERS_INTEL_USB4_RETIMER config from Meteor Lake
SoC to Rex mainboard to maintain the symmetry with previous
generation ChromeOS devices (Brya and Volteer).
BUG=none
TEST=Able to build and boot to Google/Rex with USB4 functionality
remaining intact.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I38360f6f1f2fcb4b0315de93c68f00d77e63003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Pre-sandy bridge hardware is likely affected by the sinkhole
vulnerability. Intel sandy bridge and newer has hardware mitigations
against this attack according to
https://github.com/xoreaxeaxeax/sinkhole.
Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add system agent ID for RPL QDF# Q271
TEST=Tested by ODM and "MCH: device id a71b (rev 01) is Unknown" msg is
gone
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Change-Id: I6fd51d9915aa59d012c73abc2477531643655e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree based on the schematic_20221014.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ia03962b0e01394ddcd4971cbe0172ef5bd913e15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68482
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Move the Raydium touchscreen to the baseboard devicetree. Since only the
liara variant uses a level IRQ as I2C devices are supposed to, all other
board variants still override this to use an edge IRQ which were added
as a workaround to make the touchscreen work on the other devices. Right
now it's unclear to me if that edge IRQ workaround was only needed
temporarily and can now be removed, so I'll keep it as it was for now.
If this turns out to be no longer needed on the other variants, the
overrides can be dropped in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic621c1a5856e9e280a25b0668010a1ee5bbb61e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68770
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add a post-code call that SoCs can hook to output or save in any way
that is specific to that SoC.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0369e4362840d7506d301105d8e1e2fd865919f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0e06ac5f92109757143897f3d331aeea0cefe4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I0081fcf3c842d8772a7045f8dc5754a2e6c039b8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change-Id: I9c75e900d05d16de830c750f074df84bb17f64dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
PS2K device needs to be under PCI0, not LPCB, for Windows to
recognize it. Same change was made to ChromeEC previously.
Test: Boot Win11 on Drallion, verify built-in keyboard functional.
Change-Id: I12019592dfa1d869ba57c1ff6c25ac6bdeb7a300
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68463
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
When CONFIG_DEBUG_SMI is enabled SMM handler performs console hardware
initialization that may interfere with OS. Here we store the state
before console initialization and restore state before SMM exit.
Tested=On not public yet system, after exiting smm, uart console can
still work well.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifa5042c24f0e3217a75971d9e6067b1d1f56a484
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Interrupt Identification Register (IIR) is a I/O read-access register.
Add definition of FIFO enabled for this register so that we can check
whether FIFO is enabled or not.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I12e8566822693004418cf83cae466dc3e2d612c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68566
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Shimlayer recipe requires OBJCOPY, so declare it at the top of
the Makefile so this recipe works as intended.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2e04dfe18df6252261836dcdf98f7e8de65287b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
After some measurements it turned out that Elkhart Lake uses a higher
CSR clock internally from which the MDIO clock is derived. In order to
stay compliant with the specification, the MDIO clock needs to be lower
than 2.5 MHz. Therefore, the divider needs to be 102 and not 62.
This patch changes the define to match the new divider value and uses
this new define at the appropriate place.
Test=Measure the MDIO clock rate on mc_ehl2 which results in 2 MHz.
Change-Id: Idf498c3547530dfa395f54488ef244e787062e34
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The highly real time driven application executed on mc_ehl1 has shown
that the L1 prefetcher on Elkhart Lake is too aggressive which in the
end leads to an increased number of cache misses. Disabling the L1
prefetcher boosts up the performance (in some cases by more than 10 %)
in this specific use case.
Change-Id: Id09a7f8f812707cd05bd5e3b530e5c3ad8067b16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68668
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Depending on the real workload that is executed on the system the L1
prefetcher might be too aggressive and will populate the L1 cache ahead
with data that is not really needed. In the end, this will result in a
higher cache miss rate thus slowing down the real application.
This patch provides a devicetree option to disable the L1 prefetcher if
needed. This can be requested on mainboard level if needed.
Change-Id: I3fc8fb79c42c298a20928ae4912ee23916463038
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68667
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so
replace "GPL-2.0-only" with "GPL-2.0-only OR MIT".
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add eDP panel power-on sequences and initialize the display in the
ramstage.
eDP panel in MT8188 EVB: "IVO R140NWF5 RH".
Panel spec name: R140NWF5 RH Product Specification
Firmware display eDP panel logs:
configure_display: Starting display initialization
SINK DPCD version: 0x11
SINK SUPPORT SSC!
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 26 cf 7d 05 00 00 00 00 00 1e
version: 01 04
basic params: 95 1f 11 78 0a
chroma info: 76 90 94 55 54 90 27 21 50 54
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 38 36 80 a0 70 38 20 40 18 30 3c 00 35 ae 10 00 00 19
descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3: 00 00 00 fe 00 49 6e 66 6f 56 69 73 69 6f 6e 0a 20 20
descriptor 4: 00 00 00 fe 00 52 31 34 30 4e 57 46 35 20 52 48 20 0a
extensions: 00
checksum: fb
Manufacturer: IVO Model 57d Serial Number 0
Made week 0 of 2020
EDID version: 1.4
BUG=b:244208960
TEST=see firmware display using eDP panel in MT8188 EVB.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I67e0699c976c6f85e69d40d77154420c983b715e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68490
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are
required.
- For audio, it requires powering on adsp_ao_pwr_con,
adsp_infra_pwr_con and audio_pwr_con.
- Add new power domain data `ext_buck_iso_bits` for buck isolation
control.
BUG=b:244208960
TEST=access display registers successfully.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports eDP as internal display interface.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6441a36557b097e041bc081b907eb60b56c9fbe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add DDP (display data path) driver that supports overlay, read/write
DMA, etc. The output goes to display interface DP_INTF0 directly.
Add ddp gclast and output_clamp settings to MT8188 to support
multi-layer display.
BUG=b:244208960
TEST=emerge-geralt coreboot.
Signed-off-by: Nathan Lu <nathan.lu@mediatek.com>
Change-Id: Icc0a878c609818fedd298c141bb39469fd2f6388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68487
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPM register at offset 0x0 is often named as poweron_config_set in
previous MediaTek SoCs. To use common driver, we rename it from
poweron_config_en to poweron_config_set.
BUG=none
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct
member `input_mode` is added to `struct mtk_dpintf` for
differentiation. We also move SoC-specific data `dpintf_data` to soc
folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
DP drivers can be shared for both MT8195 and MT8188, so move them to
common folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I51ab987420e592ac2f841c2d7761c0adcc43124e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Always detecting the presence of the ELAN touchpad doesn't affect the
functionality, but allows dropping the override for all variants that
have multiple touchpad options.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id5d14eedd5d95dd0990ae56775daed9284c03717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This helps with deduplicating the identical parts of the variants'
devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie050c4624327b904e8cb0959b40421339e43f825
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6f5c10618edb87d2dc12c14187c4620d8675a443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Updating from commit id c45d2febb:
2022-10-12 15:56:24 +0200 - (Merge "fix(ufs): retry commands on unit attention" into integration)
to commit id 61fe7826d:
2022-10-18 16:20:05 +0200 - (Merge "feat(fvp): build delegated attestation in BL31" into integration)
This brings in 10 new commits:
61fe7826d Merge "feat(fvp): build delegated attestation in BL31" into integration
cf17f7c45 Merge "chore(rpi3): remove redundant code" into integration
70360382b Merge "docs(maintainers): add NPU driver owners" into integration
60c439435 docs(maintainers): add NPU driver owners
e504ce5fa Merge "fix(versal_net): Enable a78 errata workarounds" into integration
bcc6e4a02 fix(versal_net): Enable a78 errata workarounds
0271eddb0 feat(fvp): build delegated attestation in BL31
6047ab122 Merge "fix(versal): enable a72 erratum 859971 and 1319367" into integration
769446a68 fix(versal): enable a72 erratum 859971 and 1319367
2594759d2 chore(rpi3): remove redundant code
Change-Id: Ic32c0889961f529e1762b208ef118a94369c34e6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable SSE2 (and SSE) when compiling for x86_64. Compilers often assume
SSE2 is present and enabled when targeting x86_64.
This fixes:
- lzma decompression code is compiled with the -Ofast flag
- 'everything' when compiling with clang.
This mostly affects qemu targets, which did not have this flag selected
yet.
TESTED on qemu.
Change-Id: I3cdc584c97016e15513df663a54a7bdb549a73e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44869
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
For some nissa variants, there are build configurations that need to use
different blobs, but otherwise are identical. Currently, they use the
same choice of board config and configure blob paths appropriately. This
avoids duplication within the Kconfig file, but the resulting firmware
images can be difficult to distinguish, since they report the same
FRID.
Add a prompt string for MAINBOARD_PART_NUMBER so it can be overridden
and round-tripped through make oldconfig, allowing customisation of the
reported FRID and other MAINBOARD_PART_NUMBER-derived values with
minimal overhead.
BUG=b:253966060
BRANCH=None
TEST=CL:3960290 MAINBOARD_PART_NUMBER configs apply successfully
Signed-off-by: Sam McNally <sammc@chromium.org>
Change-Id: I3497d7fa1c04c8fa2592025c771d9dbc65632e6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Parallel Port has LDN 1 and Serial Pot has LDN 2. Fix typo made in the
patch adding register definitions for NCT6687D Super I/O chip.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If850d2a0a03bd41e3d855f347fd182831bcfcdca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This is the enum value to initialize the Smart Trace Buffer's
Spill-to-DRAM feature. More information on how this is used is
available in the STB Linux kernel driver.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab2e5fb121902959ddd0e7c8cca930a327b69291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Fix "bad revision" error when we run "update_submodules" with no option.
This adds "origin/trunk" branch name for "util/goswid".
Change-Id: Ie84d40fa00c6d0032b93917ad96e60120388eab5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
We've seen failures because the binaries were not being built into the
image. In particular, the APCB is modified by the coreboot build
process, so if the APCB isn't built correctly to support the correct
number of SPDs, the build can fail.
The mendocino FSP binaries are not yet pushed, so the build is currently
pointing at the cezanne binaries. The mendocino FSP will be pushed when
the mendocino chips are released for sale.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I31d11c5327416f4339930373c447531ae9f79d28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Update the MCA bank names for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If0082bd5362bdead3f9dc693d1e338e8cda224f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Pentium CPU will use 150W adaptor, this change revises PsysPL2 to 150W
based on fw_config.
BUG=b:253542746
TEST=Check CPU PsysPL2=150W in AP log with Pentium CPU.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I63b2a9d79454b20b60ba1317a8eebb3c10eff9d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
SaGv is enabled for all brya variants, so it should be harmless
to enable it for brask variants to save some power.
BUG=254374912
TEST=Build and boot to Chrome OS
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Ib5d1e39b3f901606e2f1449e4ed40d53696562ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The touchscreen IRQ has been configured as LEVEL_LOW in skyrim projects.
Therefore, update the gpio.c to be consistent with the configuration.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Iccfe5b01f10899c43151762e4730a05990afa602
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id6363c92f8155007e05c682694d7413fd4630b6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Working with resources in KB is tedious and the base_k / size_k variable
naming was simply wrong in one case.
Change-Id: Ic5df054e714d06c9003752ed49dc704554e7b904
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TOLUD stands for top of lower usable dram. Memory between cbmem_top and
TOLUD, even if stolen for another device/purpose can still be marked WB
cacheable. This will result in a cleaner MTRR setup.
Change-Id: Ic3d6f589c60e44a3dce9122d206397cac968647f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68405
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add a config for FIVR in devicetree for both, mc_ehl1 and mc_ehl2
variants in order to provide the real delay value for the VCC supply
rail. This delay is needed to enable proper switching between different
VCC levels based on current system state.
Change-Id: Ibccb8ea1b42ccd2ff0a37cbd9651528a2a55ebd6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
the "x86 PIC code ebx" workaround done previously
by commit 689e31d18b0f ("Make cpuid functions usable
when compiled with PIC") does not work for x86_64
(the upper dword of rbx is set to 0)
the GCC bug that needed the workaround was fixed
in version 5 (see GCC bug 54232)
Change-Id: Iff1dd72c7423a3b385a000457bcd065cf7ed6b95
Signed-off-by: Matei Dibu <matdibu@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66345
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Apollo Lake seems to start with PCIe root ports unusable/uninitialized
before FspMemoryInit() is called and FSP-M properly initializes these
root ports.
However, we need the root ports accessible before FspMemoryInit() in
certain cases, such as emitting POST codes through a PCIe device.
For the initialization to happen properly, certain register writes
specified in Apollo Lake IAFW BIOS spec, vol. 2 (#559811), chapter
3.3.1 have to be done.
BUG=none
TEST=Boot on siemens/mc_apl2 with NC_FPGA_POST_CODE enabled and check
that the POST codes are emitted before FspMemoryInit().
Change-Id: If782bfdd5f499dd47c085a0a16b4b15832bc040e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68223
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the VCCST ICCMax Control for the ADL-N display flicker issue.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I10709ee8653563b397e8408e8e24ef8e656b02e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68252
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I692b86bba28853186185846f63dad1dcbfce1eea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia87fbbeb9ecb57ee2f4879404cbae5403de9bfc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add HBM3 according to SMBIOS 3.6.0:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
Change-Id: Id8473e8c4b5006b53b5ff9de7825d15595f2a616
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65356
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4fb845bb4145d47aea39d7e5493d854d00e289aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We still had a lingering reference to the old sabrina codename in the
vendorcode directory. Searching through the code now, the only places
the sabrina codename is seen is in the release notes, as is proper.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41762880b45a85ce7cd4210b8ce623076d874c06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Make GPIO_I2C_MASK macro more accurate by using the GPIO_I2Cx_SCL
definitions instead of BIT(x).
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I13fc376552068a64768fe1cf9f1c09cca1768aed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On nissa, the pre-x86 time is not part of the 1s firmware boot time
target. Including the pre-x86 timestamps causes confusion since the boot
time appears to be greater than 1s, so disable the Kconfig on nissa.
We're not doing any analysis or optimisation of the pre-x86 time on
nissa anyway, this work will start from MTL onwards. Also, the Kconfig
is already disabled on the brya firmware branch, so this will result in
the same behaviour as brya.
Before:
Total Time: 1,205,840
After:
Total Time: 995,300
BUG=b:239769532
TEST=Boot nivviks, check "1st timestamp" is the first timestamp.
Change-Id: I885071c9e0ff9c8fac9444b382567d38a19c3c15
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I406f21c0c05e6af357e45e718422be94c6fd5408
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Not all kahlee variants use the RT5682 audio codec, so split the
baseboard audio ACPI into two parts and only include the asl for
the codec(s) actually needed for a given variant.
TEST=build/boot aleena, liara variants and verify no ACPI present
for RT5682 codec (which is not present on the boards).
Change-Id: Icb7df4f8e51495ad3cb40113cd00810fd27dcd00
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update generated FSP headers for Alder Lake N from v3301.00 to v3343.04.
Changes include:
- FspsUpd.h: 1. Add PchFivrVccstIccMaxControl UPD
BUG=b:254374913
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp" and boot Nissa.
Change-Id: I20b13d3dff2951e6ec3aa754c8954989a3b4e176
Signed-off-by: Shaik Shahina <shahina.shaik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68424
Reviewed-by: Reka Norman <rekanorman@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9755 support for frostflow
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I1db598c68687ed17fd9baa3567ab8fdd3e4fb6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use the BIT() macro for single-bit constants.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I490f0093d55813260fcdb7303a94accfa90e75e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I726df4ff97688f4c48961e6e61672cef6c3b7aff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59ab9c2eaa65d974d418123e87e9afe65b1168cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Built from a mixture of autoport output, other variants, schematics and
expert guesswork. I don't have this board, but the code has been tested
by someone else and boots successfully (first try) with TianoCore. It's
reasonable to assume most things work, as this board is very similar to
the already-supported variants.
Change-Id: I3d8df483e5573f77782b7d18b1410b391bfe387d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61541
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To allow testing of code that uses msr calls, separate the actual
calls into a separate header file, This allows the tests to emulate
the msr access without replacing the rest of the msr.h definitions.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I102709fec346f18040baf9f2ce6e6d7eb094682d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Andrey doesn't seem to have interacted with APL or coreboot
2+ years, so remove him and mark Apollo Lake as orphaned.
Add myself for Odd Fixes.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6cb2f2da63dda3cb841786d53f89b583a9df9791
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I7b279cf2c69f62b47ef497edd372034f148fff03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For consistency with the PLL function naming:
- Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel().
- Rename mux_set_sel() to pll_mux_set_sel().
BUG=none
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize MT6315 for powering on big cores on MT8186T.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib1d71d4f1689ba1e7ea5f798503ef11eff423fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68621
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On MT8186T, the big cores are powered on by MT6315 via PMIF. This
patch adds the following changes.
- Add MT6315 settings.
- Configure PMIC PMIF for MT6315.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPMI interface configuration is SoC-dependent.
- MT8192 and MT8195 are the same.
- MT8186 does not need to implement this.
- MT8188 is different from MT8195, and we will submit another patch to
fix this.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't
need to configure PMIF SPMI IO pins. Add a config to control that.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other
MediaTek SoCs support PMIF_SPMI and PMIF_SPI.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8186 has two slightly different versions: MT8186G and MT8186T
(turbo version). Add get_cpu_id() to identify different CPUs.
BUG=b:249436110
TEST=cpu id is correct.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I9e8ad533e939553a93e76f1dbb37fc98b53f06d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ic4ce44865544c94c39e8582780a7eca7876f5c38
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Reviewed files and values match morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6772b21110f74a77eef285da3e1f313ec6326cc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reviewed files and values match morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9d058b0f61b4784a1d83289e75705a6415405d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reviewed file and values match morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I8f914432e0f55aa8050728e8cf41a3dee20990e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add two new types for MDN DDI descriptor
BUG=b:228284940
TEST=Normal boot and S0i3 cycles
Signed-off-by: Jason Nien <finaljason@gmail.com>
Change-Id: I02793f032f9855dac202a5aca8666c26426d6cb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66847
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
Change-Id: I94dd6b1bb81bbc38ac5f89469b3ed7c83ca2a498
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I22d7e724e69b41c9fabdef785276dc428be2b400
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit d9ef02ce (soc/intel/apollolake: Lock down Global SMI) breaks
SMM/SMI on Apollolake (but not Geminilake), so guard it accordingly.
TEST=build/boot google/reef, verify SMM/SMI/SMMSTORE functional.
Change-Id: I00cbe046b61e6c342f7961670478d0ca8d365c2e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
If the coreboot code is not in a git repository, the linters switch
from using `git ls-files` to find. This requires some changes to
prevent the linters from looking at the wrong files which are
automatically excluded by git.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I81d138760c29a7c476280bb9d963f6be99c75d6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested on unsupported mainboard (945g-m4).
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1935308cc50abd651b52d6290d66180905c6a521
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68087
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Create the gladios variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:239513596
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_gladios
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I3dc99d97d8e30d9641f56616222dd68e3a0d548d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update the SMI definitions for morgana per PPR #57396, rev 1.52
Remove references to dropped SMITYPE_XHC2_PME in xhci.c to fix compile
errors.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6a9f05bcc6a6e4c94114ccbd07628629bdfabcba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The coreboot 4.18 release has been tagged, so the release notes can
now be finalized.
Updated with known issues.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I77676ddc42488e9635f1e6f995386490dca441c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68467
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
i945.h file is not used to generate asl files.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I93bf96f8a86a2652a88f3a129ec197048dd914a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68215
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To allow testing of code that uses CPUID calls, separate the actual
calls into a separate header file, This allows the tests to emulate
the cpuid access without replacing the rest of the cpu.h definitions.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic5ee29f1fbb6304738f2eb7999cbcfdf8f7d4932
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This allows us to see which of the common code blocks have been verified
and which have not.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Icb9eba5838013de75c408c28a4a7d3afacdf0674
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I0e5f102d75647c9c184cb7422af30c9196503882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I055847c9b08795683fe2e1dfd7fcde49901fc973
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Boards which use an I2C TPM and do not use vboot will not have the
I2C bus initialized/ready at the start of the device init phase.
If TPM init is called before the bus, init will fail with I2C
transfer timeouts and a significantly lengthened boot time.
Resolves: https://ticket.coreboot.org/issues/429
TEST=build/boot google/reef w/o vboot, verify successful TPM init.
Change-Id: Ic47e465db1c06d8b79a1f0a06906843149b6dacd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68550
Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
We use the name of the APCB file repeatedly, so put it into a variable
so that it's easier to update.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I8684db2f7b2d68f0354e37bd8cdfc4f9cab44b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change is to skip sending the MBP HOB since coreboot doesn't
use it and also helps to reduce the boot time by ~40 ms.
Boot time data
Before:
* 955:returning from FspSiliconInit 1,656,985 (274,416)
After:
* 955:returning from FspSiliconInit 1,593,036 (233,286)
BUG=b:252410202
TEST=Verified that boot time is reduced by ~40 msec.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I0d4f66940529b8d38d9658c769feba8b5c9b715e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68418
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds the support to enable/disable skipping MBP HOB
from the devicetree based on mainboard requirement.
Porting the feature from commit 2bc54e7c001c
("soc/intel/alderlake: Add support to skip the MBP HOB")
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I360d33617b9d2626fce5600e861214b0747f57b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|