| Age | Commit message (Collapse) | Author |
|---|
|
This patch enables Cnvi BT Audio Offload feature and also
configures the virtual GPIO for CNVi Bluetooth I2S pads.
BUG=b:233834597
TEST=Verified BT offload feature on Nivviks P1.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iffbd08351d083d2b550f309994af931bceb257d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Configure the unused virtual CNVi BT GPIOs to NC since we
are using BT over USB mode for Nissa.
BUG=b:233834597
TEST=Verified BT offload feature on Nivviks P1.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Id84823b9ad921ebd7ff773d6cce581563613745f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65669
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Disabling the Package C-state demotion feature for nissa baseboard
as a work around to the S0ix issue and also this doesn't have any
impact on the power and performance measured and verified by the
PNP team.
This feature will be enabled after its functionality is verified with no
issues and also based on its impact on PNP.
BUG=b:235005582
TEST=Boot and verify that S0ix issue is resolved.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I4d586b962c27b86ee75651dcd655bc0868504646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65664
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
BUG=b:235005582
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I9e254988bc3d20b9f9e42a605cc0ebd419ab49ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Aligning the "memory" ranges in devicetree is supposedly only needed on
very old arm32 kernels. So let's get rid of it.
Incidentally this fixes smaller than 1MB memory regions where the size
would end up being 0.
Change-Id: Ibbf5e331c79ed4ae3ed8dd37bf7a974d2412ce12
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add 0x7d55 as another ID for Meteor Lake graphics controllers.
TEST=Boot with MTL silicon to check coreboot log for DID2
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iea01f6d4f2469fc0eeac73a3f1c4b9af1f39463c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Based on latest schematic to update the PCIE and USB setting.
BUG=b:237659398
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I97989b7a8d9104379ffb0b454d7248d49855f680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
DPTF Policy and temperature sensor values from thermal team.
BUG=b:237640264
TEST=USE="project_crota emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: I43340bd1acfe6ec2036ea80339dbf896615a456a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65563
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib8d9a9e94d16ad291d9cc8576db845a634ae026e
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65614
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The LabTop was renamed to StarBook since the release of the Mk V.
This change keeps the directory name more relevant, as there are
more boards using the name StarBook.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3513fb56c1adf663ed7bcdade2cc52cd8c0d6f4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65640
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I76e4438dea6a7fcce06211af808eee51465f19c5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4fd7f86a61d1a1a8133a633eb257275222f27af9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I65f8e6860a7f734a7d2b8c0055cb18d851f38ad0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I62d8374eb7c2499d34c3f43c9f7fd01caaa3e2f4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ia8a78e9947466e88fb9abf1b91ef21ce763240c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I25d0f5a97ec5dd023e2acb458de1b20427fe353e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enable SaGv support for Kinox
BUG=b:238153479
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Id4646f1621a414a1ec4e272c826b0baea2bb4e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This contains the following commits:
* d55c315 mb/starlabs: Remove padding from logo
* 6412d38 mb/starlabs/starbook/cml: Update EC from 1.03 to 1.07
* fb72ac5 mb/starlabs/starbook/tgl: Update EC from 1.00 to 1.03
* cda5eaa mb/starlabs: Rename labtop to starbook
* f16020a Revert "soc/mediatek/mt8186: Update SPM firmware to
pcm_suspend_v0215…
This also changes starlabs/labtop Kconfig to use the new paths for
the EC binaries from the above commits.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I83143118af422276ee335ad4ef9eca76f54a9fc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Modify ddi_ports_config based on schematic.
DDI_PORT_A = DP
DDI_PORT_B = HDMI
DDI_PORT_1 = Type-C DP
DDI_PORT_3 = HDMI
BUG=b:237419696
TEST=Boot to Chrome OS and check all display port working
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7c0458f0dbd4637b91af9e01664073e1f8a7a614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch fixes the issue with INTC1056 invalid resource reported by
alderlake-pinctrl Linux driver on ADL-S platform. The driver also
includes GPIO Community 3 in the GPIO list compared to ADL-N which
was missing in GPIO ACPI device.
TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A DDR4 WIFI and check there is
no invalid resource error reported by alderlake-pinctrl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23da68c247de86438cc2eef2b5a5a9aa711c1d7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If66c2799d4d74ff9f309665a0336b5f679796f9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently the EC's MKBP interrupt line is programmed as dual-routed to
both SCI and IOAPIC. The brya EC will pulse the MKBP GPIO and also
send a host event when there is an MKBP event for host to service.
This causes an extra SCI to be generated, and the kernel will respond
to each MKBP event with an extra unnecessary host command. Changing
the pad configuration for the MKBP GPIO to APIC only fixes this issue.
BUG=b:236706977
BRANCH=firmware-brya-14505.B
TEST=excess GET_NEXT_EVENT host commands are gone from EC log
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic7dd596987f6d34c69d46674bdd07785235e2d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65480
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EEs have observed the ramp down delay on this signal in more detail
and 40 ms can still meet the sequencing requirements.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I49ef801f7a3fd7945ded63da1399eaf57fd6aef0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since the GPU will be left powered on, the kernel has the opportunity to
save context and this method to save the BARs is not required.
BUG=b:233959099, b:236289930
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I19cf12426361a53e3672c1e05aa6d68d5dd6627c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Initialize NOR-Flash in the bootblock.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I8ee24b5b24643bce57eb29682d6d0234a6fe8641
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65622
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes all instances of the `ADL` from Meteor Lake SoC
directory.
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8153b2070467beb582ce1f70be97272ce09ca04c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65667
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates IFD_CHIPSET kconfig value from `ifd2` to `mtl`.
TEST=Able to build and boot Google/Rex image on MTL emulation
platform.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I416f881bcbe3dd7494ead636d6b593366a51b31c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure TDC current for VR domains.
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
- Others comes from 'commit c6d716694272 ("soc/intel/alderlake: Configure the SKU specific parameters for VR domains")'
BUG=b:237230877
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ie9cf8975309b57b4189e2b50f37bd61ac0105e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65659
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTF oem_variables and override based on charger type.
BUG=b:230803675
TEST=1. With 90W adapter, check ACPI object ODVX and oem_variable[0]=1
Name (ODVX, Package (0x06)
{
0x00000001,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
})
2. With 65W adapter, check ACPI object ODVX and oem_variable[0]=0
Name (ODVX, Package (0x06)
{
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
})
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I78929ecbc9db56aa234b3f46c641d1f2f3b7cba8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
agah proto boards with i7 silicon face boot issues due to high power
consumption during MRC training.
This patch is a temporary WA to run in SAGV disabled mode while the
thermal issue is being investigated.
BUG=b:234402102
BRANCH=firmware-brya-14505.B
TEST=Build CB image and boot on agah board.
Change-Id: I431d233b23fb4f5c68117ea380fdec5646b88346
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65300
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Configure some basic FSP parameters in devicetree for
to allow for booting an OS.
Change-Id: Iff227c70d0155ac27d6ffa50a069d154bb7fce3c
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63499
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Based on the output of:
- inteltool from CB:63374
- intelp2m from CB:63403
TEST=Build coreboot binary for msi/ms7d5 and boot the board.
Change-Id: If37eaf875f8fcfc64299227744a8c40d304a0214
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up
up to romstage where it returns from FSP memory init with an error.
What works:
- open-source CAR setup
- NCT6687D serial port with TX pin exposed on JBD1 header
- SMBus reading SPD from all 4 DIMMs
This board will serve as a reference board for enabling Alder Lake-S
support in coreboot. More code and functionalities will be added in
subsequent patches as src/soc/alderlake code will be improved for
PCH-S.
TEST=Extract the microcode from vendor firmware and include it in the
build. The platform should print the console on the serial port even
without FSP blob.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Avoid piping to `head` to print the top line, and do it in `git log`
directly.
Change-Id: Id9b99b06c5bdd9c381bd039fc1914a9a2f332aa6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The comment indicates CSE's data partition is placed after BP2. But, it
was place after BP1.So, the patch updates the comment to reflect the
CSE Region layout correctly.
TEST=Build the code for Brya and didn't notice any compilation errors
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ic871e2e395de17157f4f526064a26bfad538707f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.
Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we
move it to common folder and select it in SoCs' Kconfig.
As suggested in CB:58837, we also rename FLASH_DUAL_READ to
FLASH_DUAL_IO_READ to reduce confusion.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If267a332519412a7919c5b7817047fabe4a564c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add GPIO drivers to let other module control GPIOs.
TEST=build pass
BUG=b:233720142
Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com>
Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd()
can be reused for mt8192, mt8195 and mt8186, so move it to new file
"gpio_op.c" in common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add timer drivers to Makefile.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
timer_prepare() is the same for MT8195 and MT8186, so move it to
common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add watchdog support for MT8188.
This implementation is based on chapter 3.10.10 in MT8188 Functional
Specification.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are more and more variables which are SoC-specific, so add
soc/wdt.h for each SoC and rename common/wdt.h to
common/wdt_common.h.
wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so
move it to a common file wdt_req.c.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Sabrina previously didn't support UART mapping in psp verstage. Now that it has been enabled, add the relevant uart code here.
BUG=b:218709292
TEST=Set serial soft fuse, boot to kernel, check logs
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I591fa69b6e722929839babfff62e9d56c68e1112
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65532
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I93c16b563c7a4f4c653d2ebfd001170cb0fca82e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia087b62904fd515bf73960a188b225f1d49197dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65646
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake-N based nissa boards use compressed ME_RW blobs for CSE FW
Update. Choose SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE Kconfig to perform
CSE FW sync in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW upgrade/downgrade on nivviks.
Change-Id: I00630096c52434f44914f3ae82ff043ecf77b80d
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65368
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When compressed ME RW blobs are used for CSE FW update, it has to be
loaded into memory to decompress. So perform CSE FW update in ramstage.
Alder Lake-N based nissa boards use compressed ME RW blobs to save on
SPI flash size. Enable CSE FW update in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW update on nivviks and verify upgrade/downgrade
works.
Change-Id: Ide9471146d186dca11fb020e5006eeaa01442669
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some Alder Lake-N boards will use compressed ME RW blobs to obtain
savings on the SPI size (1916KB before compression, ~1132KB after
compression). So add an additional check before calling
cse_fw_sync() from romstage. When compressed blobs are used, the call to
CSE firmware update has to be in post-RAM stages.
BRANCH=firmware-brya-14505.B
Change-Id: I0d9ede52cb493974e4ba6e2e2cf11c9789b3b087
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63760
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I9f0fcf52b6b7d622e4fd182e007de6401856c7fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65645
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of trying to update the submodules, then skipping each update if
git is not present, just don't try to update the submodules at all.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I83ef48a21820c0983e38823331c9ba0fe0fc277f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
To configure the clangd plugin for various editors, The command
'bear -- make' is used to generate the compile_commands.json.
The clangd plugin creates a .cache directory under inside coreboot.
Just ignore both of these.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic844f807ab48597b8aae29bb64ab16d6c8dff217
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There is no longer any information printed when updating submodules, so
on the initial build, this can lead to a long delay without explaining
what's going on.
Just add an information line that the submodules are being updated so
that the user can see what's happening.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I987e50b99e39b976bc8367525549153e1eba69cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I2d99523647dfb43265db8f2701b525afd1870fc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch enables X2APIC to avoid hang-ups due to
`Switching from X2APIC to XAPIC mode is not implemented.`
BUG=b:237924211 ([MTL-FSP][v2222.1] Lists of boot issue with MTL FSP)
TEST=Able to enable X2APIC on rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I58649a9a6c9c0ba86856f6aa5fb470e2ef774e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65617
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I2360a1a79f07ff8466ed01aa7f180d410e019292
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Set tcc_offset value to 0 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I8d4c631e07873923226683c8aa0cf36cb872e2d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I068c6e46d85d869afc72280509a03d5ff682b917
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65618
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the CCD (aka "Webcam") USB port in the devicetree as
it is used in multiple places. It is used in devtree to
disable it based on the CMOS setting "webcam", and in the
devicetree to configure the port tuning.
This also corrects the port that is disabled on CML, from
usb2_port[6] to usb2_port[3].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16e368fc7965f978f2302633122ba63038603c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64704
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
This also removes usb3_port[2] as it is not connected and fixes the labelling of usb3_port[0] and usb3_port[1].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7923fc00c36687a7f89d863eb0ea4e01a036502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update the Vbt to disable the fixed mode feature, to allow for
bootloader resolutions higher than 1920x1080.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibd9850dcaef97a58c6694ee594014e9f16ae7f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=check gpios are locked in pinctrl dump.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ieed2d40b0222d8c8c193e0590131f83a5d96add9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=check gpios are locked in pinctrl dump.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I61931b0b2f1f936a672e72c98b83d66ba0059bf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch sets the Power Limits and Voltage Regulator settings for
three RaptorLake SKUs (45W, 28W and 15W) following the guidance from
document 686872 (June 7th edition).
BUG=b:237809660
TEST=Power Limit and VR serial logs review + debug instrumentation
SKUs successfully booted
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e9d4039615e6c33b869c6243efbfeb2259ac219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65582
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In reality the expression should not overflow as the value
fits in 32 bits.
Change-Id: I50d83dce25a4d464e1c979502c290d8ecd733018
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
mch_id is set to zero and then unnecessarily tested.
TEST=build and boot image on ADL RVP board
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I4f48742b04edd50fbc0db342b563534e709d6fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Platform with public FSP hooked-up have an additional parameter
to control CNVi WiFi with CnviWifiCore UPD.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I19efb645fbe1530a571c92d0573c1c60ff6605a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update 3rdparty/fsp submodule to include AlderLake FSP.
Hook up the Kconfig settings to point to Fsp.fd and headers for
ADL-S and ADL-P platforms which the FSP has been published for.
The FSP binaries are compliant with the specification revision 2.3
so update these settings accordingly.
Although FSP header is v2.3 compliant, the features set of the FSP
v2.3 is not being met.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I577931da7952b681534bb78b7b2c7683cd99febd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65519
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for primus board. Please refer Intel doc#723158 for
more information.
BUG=b:237725329
TEST=Verify the build for crota board
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I6dde74c098ba57b7cd66ce7b9ee941b8961ad20c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cyan Yang <cyan.yang@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Modify GPIOs according to SOC_GPIO_Table_0629.xlsx.
- GPP_A21 from TCP_DP1_CTRLCLK to NC
- GPP_A22 from TCP_DP1_CTRLDATA to NC
- GPP_E20 from NC to TCP_DP1_CTRLCLK (Native Function 1)
- GPP_E21 from NC to TCP_DP1_CTRLDATA (Native Function 1)
BUG=b:237468533
TEST=emerge-brask coreboot
Change-Id: I8e7d343731efbfc04304d52a3493ab30b8a739b0
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
There is a requirement that the TPM RST signal cannot be asserted by
software. On nissa this is PLT_RST_L, so lock this pin to prevent it
being reconfigured as a GPIO.
BUG=b:216671701
TEST=Try to change GPP_B13 from the kernel:
$ echo 677 > /sys/class/gpio/export
$ echo out > /sys/class/gpio/gpio677/direction
$ echo 0 > /sys/class/gpio/gpio677/value
$ echo 1 > /sys/class/gpio/gpio677/value
GSC console doesn't show "PLT_RST_L ASSERTED" / "PLT_RST_L DEASSERTED"
Change-Id: Id5d64b4b028e4f63c4acb05cd8632d0642866688
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65591
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add G2 touchscreen support for craaskvin.
BUG=b:235919755
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I7ade3ac1d135b8b21b09ef335ab7b30ae7a5e2c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Set the GPIO configuration of joxer
BUG=b:237628218
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I1f7529342fc0800878f875d3641a2f93fbe6009a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Move watchdog functionality to common folder.
BUG=b:221393157
TEST=None
Signed-off-by: Kshitiz Godara <quic_kgodara@quicinc.com>
Change-Id: Ib2f7f21ce991fd8193329e7b8260e58e47bf39c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
C0 A2 A3
+----------------+
| REAR |
| |
| |
| |
| FRONT |
+----------------+
A1 A0
BUG=b:232419500
TEST=emerge-brask coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I5ada4e9b25102a9cfd3b02a2abcd956f6cbc5619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Won Chung <wonchung@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
CPUID_RAPTORLAKE_P_Q0 is ES. Add it to generate is_es = 1 in ACPI
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: zhixingma <zhixing.ma@intel.com>
Change-Id: I67d70dc7e916a4818869aef86e7e642b66ea5dae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Create PSP NVRAM and RPMC NVRAM region with size 128K & 64K
respectively, which are supported region by the PSP.
moved CBFS up due to build error, CBFS need not to be at the end the flash for amd Zen cpu.
Change-Id: Ide778c61a755697c1bef1eaa87f2976d8ff12eb6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds new Rembrandt SoC support by defining it as base SoC
of sabrina as sabrina is derived from Rembrandt SoC.
All the needed changes for Rembrandt SoC will be applied under
SOC_AMD_REMBRANDT config.
Change-Id: I1c9392918cc2c6b511d467f99aceefc725750ce6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for kano board. Please refer Intel doc#723158 for
more information.
BUG=None
TEST=Verify the build for kano board
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I19430a68e1e847e71382781563200a4c88f37a59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Fill GPIO table for Pujjo.
BUG=b:235774770
TEST=emerge-nissa coreboot
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I307b8460632f1feae9591200057c0e6471cbab24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65104
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates the ACPI locations of Type-C ports.
BUG=b:232806406
TEST=none
Change-Id: Ia15e09a58c731a1364a994fadf8df39115fbe7c4
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add mainboard folder and drivers for new reference board 'Geralt'.
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5e437d46097369bef535ff64e6a693b7cf67f2f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65586
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|
|
Add new folder and basic drivers for Mediatek SoC 'MT8188'.
Difference of modules including in this patch between MT8188 and
existing SoCs:
Timer:
Similar to MT8195 and MT8186, MT8188 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
The implementation is based on these files:
MT8188G_Application Processor Technical Brief_v0.4.pdf
MT8188G_Functional Specification v0.4.pdf
MT8188 Application Processor Registers-1.pdf
MT8188 Application Processor Registers-2.pdf
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|
|
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot
romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
BUG=b:237263080
TEST=Able to build and boot MTL simics. Also, verified the FSP debug
log is using coreboot debug library as below:
Before:
Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
The 0th FV start address is 0x000F961B000, size is 0x00150000, handle
is 0xF961B000
Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
With this code change:
[SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
[SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
[SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
[SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000
[SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
[SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
[SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80ba73afed642e6d21c5310e9bf734f6f7170347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds below UPDs into the existing FSP partial header v2222.1
FSP-M UPD:
DisableMc0Ch0
DisableMc0Ch1
DisableMc0Ch2
DisableMc0Ch3
DisableMc1Ch0
DisableMc1Ch1
DisableMc1Ch2
DisableMc1Ch3
DdrFreqLimit
GpioOverride
SerialIoUartDebugMode
SerialDebugMrcLevel
SmbusDynamicPowerGating
WdtDisableAndLock
SaIpuEnable
SkipCpuReplacementCheck
TcssDma0En
TcssDma1En
VtdBaseAddress
CpuCrashLogDevice
CpuCrashLogEnable
LCT
TdcEnable
TdcTimeWindow
Lp5CccConfig
RMTBIT
RmtPerTask
RMTLoopCount
MrcFastBoot
EnCmdRate
SaGvGear
TAT
PchHdaVcType
BdatTestType
RdEnergyMc0Ch0Dimm1
RdEnergyMc0Ch0Dimm0
CorePllVoltageOffset
RdEnergyMc1Ch1Dimm1
RdEnergyMc1Ch1Dimm0
DciEn
PchPort80Route
ActEnergyMc0Ch1Dimm1
ActEnergyMc0Ch1Dimm0
HeciCommunication2
PcdSerialDebugBaudRate
HeciTimeouts
ThrtCkeMinDefeatLpddr
PchPcieHsioRxSetCtle
BdatEnable
DisableCpuReplacedPolling
PchSataHsioRxGen1EqBoostMagEnable
CoreVoltageOffset
PchPcieHsioTxGen1DownscaleAmp
PchHdaDspUaaCompliance
VddVoltage
WRVC1D
PreBootDmaMask
tWR
RingVoltageAdaptive
PchSataHsioTxGen3DeEmphEnable
PchPcieHsioRxSetCtleEnable
RingPllVoltageOffset
OcSupport
WrEnergyMc0Ch0Dimm1
PdEnergyMc1Ch1Dimm1
PdEnergyMc1Ch1Dimm0
DmiGen3ProgramStaticEq
SmramMask
tRAS
PerCoreHtDisable
IdleEnergyMc1Ch0Dimm0
IdleEnergyMc1Ch0Dimm1
Gen3LtcoEnable
tWTR
RCVET
DmiGen3UsPresetEnable
tCWL
PwdwnIdleCounter
WRTC1D
CLKTCO
PrimaryDisplay
DisableMessageCheck
tFAW
PchSataHsioTxGen2DeEmphEnable
SerialIoUartDebugRtsPinMux
GtExtraTurboVoltage
TXTCO
PchSataHsioTxGen3DownscaleAmp
CpuRatioOverride
PostCodeOutputPort
DmiHweq
CoreVfPointCount
NModeSupport
Ddr4DdpSharedZq
RdEnergyMc1Ch0Dimm0
RdEnergyMc1Ch0Dimm1
PchSataHsioTxGen2DownscaleAmp
DebugInterfaceEnable
WrEnergyMc0Ch1Dimm0
WrEnergyMc0Ch1Dimm1
SaPllVoltageOffset
DmiGen3EndPointPreset
PchSataHsioRxGen2EqBoostMag
VDDQT
PvdRatioThreshold
CoreVfPointOffsetMode
DmiGen3DsPortRxPreset
BclkRfiFreq
SmbusArpEnable
PowerDownMode
DebugInterfaceLockEnable
RingVoltageOffset
EnableExtts
SerialIoUartDebugCtsPinMux
PchPcieHsioTxGen2DownscaleAmpEnable
Avx2VoltageScaleFactor
GearRatio
GtVoltageOverride
EccSupport
RingMaxOcRatio
TrainTrace
EnablePwrDn
IsTPMPresence
OcLock
DmaBufferSize
SOT
CoreVfPointRatio
PchPcieHsioTxGen2DownscaleAmp
TjMaxOffset
CoreMaxOcRatio
RingDownBin
PchSataHsioRxGen1EqBoostMag
BiosAcmSize
tRFC
PchPcieHsioTxGen1DownscaleAmpEnable
PdEnergyMc0Ch1Dimm0
PdEnergyMc0Ch1Dimm1
RDMPRT
TxtLcpPdBase
CMDVC
SerialIoUartDebugBaudRate
PchTraceHubMemReg1Size
CoreVoltageOverride
McPllVoltageOffset
PdEnergyMc1Ch0Dimm0
PdEnergyMc1Ch0Dimm1
GttMmAdr
PchPcieHsioTxGen1DeEmphEnable
ApStartupBase
CoreVoltageAdaptive
GtVoltageMode
PcieImrRpSelection
TxtLcpPdSize
PchPcieHsioTxGen2DeEmph3p5
ThrtCkeMinTmr
RealtimeMemoryTiming
UserBudgetEnable
PchPcieHsioTxGen3DownscaleAmpEnable
GmAdr
PchSataHsioTxGen1DeEmphEnable
CrashLogGprs
tRTP
RMC
PchSataHsioTxGen3DownscaleAmpEnable
RDODTT
RDVREFDC
PerCoreRatio
IdleEnergyMc0Ch1Dimm1
tRCDtRP
DidInitStat
SerialIoUartDebugRxPinMux
SerialIoUartDebugMmioBase
BiosSize
MmioSizeAdjustment
PchTraceHubMode
DmiGen3Ltcpre
CoreVoltageMode
DmiGen3UsPortTxPreset
Gen3EqPhase3Bypass
BclkSource
KtDeviceEnable
DciUsb3TypecUfpDbg
CoreVfPointOffset
Gen3RtcoRtpoEnable
TotalFlashSize
BclkAdaptiveVoltage
TvbRatioClipping
EnablePwrDnLpddr
WRTC2D
RankInterleave
PchSataHsioRxGen3EqBoostMag
IdleEnergyMc0Ch0Dimm1
IdleEnergyMc0Ch0Dimm0
Ratio
JWRL
Avx3RatioOffset
Avx2RatioOffset
RDVC1D
DCC
PchSataHsioTxGen2DeEmph
ExitOnFailure
IdleEnergyMc1Ch1Dimm1
IdleEnergyMc1Ch1Dimm0
RingVoltageOverride
SpdProfileSelected
ScramblerSupport
SaGvFreq
WRVC2D
DmiGen3EqPh3Method
CMDSR
RdEnergyMc0Ch1Dimm0
RdEnergyMc0Ch1Dimm1
UserThresholdEnable
ThrtCkeMinDefeat
DmiGen3EqPh2Enable
tRRD
ChHashEnable
BistOnReset
ChHashInterleaveBit
RemapEnable
RDVC2D
DIMMRONT
WrEnergyMc0Ch0Dimm0
DmiAspm
PchPcieHsioTxGen2DeEmph6p0Enable
PchSataHsioTxGen1DeEmph
RDEQT
TxtDprMemoryBase
WrEnergyMc1Ch0Dimm1
WrEnergyMc1Ch0Dimm0
DmiGen3EndPointHint
CleanMemory
PchSmbAlertEnable
SaOcSupport
PchSataHsioTxGen3DeEmph
TxtImplemented
CoreVfPointOffsetPrefix
PchHdaTestPowerClockGating
DmaControlGuarantee
DIMMODTT
ERDMPRTC2D
RootPortIndex
SkipStopPbet
VtdIopEnable
DmiGen3DsPortTxPreset
ActiveCoreCount
PchLpcEnhancePort8xhDecoding
GtVoltageOffset
DisPgCloseIdleTimeout
ActEnergyMc1Ch0Dimm1
ActEnergyMc1Ch0Dimm0
Idd3n
Idd3p
PchSataHsioTxGen1DownscaleAmpEnable
BClkFrequency
ActEnergyMc0Ch0Dimm0
ActEnergyMc0Ch0Dimm1
DdrFreqLimit
Gen3EqPhase23Bypass
WrEnergyMc1Ch1Dimm0
DmiGen3DsPresetEnable
PcieImrSize
EWRTC2D
IbeccOperationMode
VtdBaseAddress
TvbVoltageOptimization
DciDbcMode
HobBufferSize
PchHdaSdiEnable
PcieImrEnabled
IdleEnergyMc0Ch1Dimm0
SerialIoUartDebugAutoFlow
tCL
PdEnergyMc0Ch0Dimm1
PdEnergyMc0Ch0Dimm0
RDTC2D
ERDTC2D
SerialIoUartDebugParity
PchPcieHsioTxGen2DeEmph3p5Enable
PchPcieHsioTxGen1DeEmph
DmiGen3Ltcpo
PchSmbusIoBase
RaplPwrFlCh1
RaplPwrFlCh0
EnhancedInterleave
PchPcieHsioTxGen2DeEmph6p0
MemTestOnWarmBoot
Ibecc
PanelPowerEnable
BiosAcmBase
DmiGen3UsPortRxPreset
DmiAspmL1ExitLatency
CmdMirror
PchSataHsioTxGen2DownscaleAmpEnable
tREFI
CpuBclkOcFrequency
CridEnable
EpgEnable
SmbusSpdWriteDisable
DdrSpeedControl
PchSataHsioRxGen2EqBoostMagEnable
GtMaxOcRatio
DmiMaxLinkSpeed
PchSataHsioRxGen3EqBoostMagEnable
PcieImrRpLocation
CmdRanksTerminated
SkipMbpHob
SerialIoUartDebugTxPinMux
PchSataHsioTxGen1DownscaleAmp
PchPcieHsioTxGen3DownscaleAmp
PerCoreRatioOverride
PchHdaAudioLinkDmicClockSelect
SerialIoUartDebugDataBits
SrefCfgEna
Avx512VoltageScaleFactor
MmioSize
SaVoltageOffset
SaIpuEnable
ActEnergyMc1Ch1Dimm0
ActEnergyMc1Ch1Dimm1
ProbelessTrace
VtdIgdEnable
ALIASCHK
PchTraceHubMemReg0Size
DIMMODTCA
TgaSize
EWRDSEQ
SerialIoUartDebugStopBits
RDTC1D
CMDNORM
RingVoltageMode
EnableAbove4GBMmio
WrEnergyMc1Ch1Dimm1
Txt
PcieMultipleSegmentEnabled
CnviDdrRfim
FSP-S UPD:
CpuMpPpi
LidStatus
ITbtConnectTopologyTimeoutInMs
D3HotEnable
D3ColdEnable
PchLockDownGlobalSmi
PchLockDownBiosInterface
PchUnlockGpioPads
RtcMemoryLock
SkipPamLock
EndOfPostMessage
CpuUsb3OverCurrentPin
PcieRpHotPlug
SerialIoUartAutoFlow
TccActivationOffset
VmdEnable
Enable8254ClockGating
Enable8254ClockGatingOnS3
HybridStorageMode
PcieRpHotPlug
Hwp
Cx
PsOnEnable
EnergyEfficientTurbo
PchPmDisableEnergyReport
UfsEnable
FspEventHandler
GnaEnable
VbtSize
PcieComplianceTestMode
CStatePreWake
SerialIoUartDataBits
SataPortsExternal
CstateLatencyControl0TimeUnit
SataP0Tinact
PmcV1p05PhyExtFetControlEn
ApIdleManner
SataPortsSpinUp
DisableProcHotOut
ITbtPcieTunnelingForUsb4
SerialIoUartDmaEnable
SaPcieItbtRpNonSnoopLatencyOverrideMode
SaPcieItbtRpSnoopLatencyOverrideMode
MlcSpatialPrefetcher
PchXhciOcLock
PmcPowerButtonDebounce
TccOffsetClamp
LogoPixelWidth
AvxDisable
Custom1PowerLimit1
Custom1PowerLimit2
PmcCpuC10GatePinEnable
PchPmSlpStrchSusUp
IshI2cSdaPadTermination
Custom2PowerLimit1Time
RtcBiosInterfaceLock
WatchDogTimerBios
SataP1TDisp
PchPciePort8xhDecodePortIndex
PcieRpImrSelection
TcCstateLimit
PchS0ixAutoDemotion
PchFivrExtV1p05RailEnabledStates
PcieRpSlotPowerLimitScale
IshUartCtsPinMuxing
PcieRpSnoopLatencyOverrideMode
TTCrossThrottling
PsysPowerLimit1
SataRstInterrupt
IshSpiClkPadTermination
PcieEnablePeerMemoryWrite
SataP1T2M
ChipsetInitBinPtr
LogoPixelHeight
PsysPowerLimit1Time
HwpInterruptControl
DevIntConfigPtr
IshUartRtsPadTermination
PsysPowerLimit1Power
EnergyEfficientTurbo
Custom3TurboActivationRatio
PcieDpc
TurboMode
PchFivrExtVnnRailSupportedVoltageStates
ITbtDmaLtr
IshSpiClkPinMuxing
PchSbAccessUnlock
PcieRpSystemErrorOnCorrectableError
PcieRpSlotPowerLimitValue
SendEcCmd
SataSpeedLimit
SataRstPcieEnable
PchUsb3HsioCtrlAdaptOffsetCfg
SataP0T2M
PchHdaVerbTableEntryNum
DmiTS1TW
DmiTS2TW
PcieRpImrEnabled
GpioIrqRoute
SataPortsSolidStateDrive
RaceToHalt
PcieRpNonSnoopLatencyOverrideMultiplier
PcieRpUnsupportedRequestReport
AesEnable
PchFivrExtVnnRailSxVoltage
SataP1Tinact
PkgCStateUnDemotion
SataPortsZpOdd
PchSerialIoI2cPadsTermination
PchFivrExtV1p05RailSupportedVoltageStates
PchUsbLtrLowIdleTimeOverride
IshSpiMosiPinMuxing
PchProtectedRangeLimit
SaPcieItbtRpNonSnoopLatencyOverrideValue
SataP1T3M
PchPmWoWlanEnable
IshUartRtsPinMuxing
SataLedEnable
VmdGlobalMapping
PcieRpEnableCpm
IshGpGpioPadTermination
PchDmiCwbEnable
ForcMebxSyncUp
FspEventHandler
PchFivrExtVnnRailIccMax
PchPmMeWakeSts
DisableD0I3SettingForHeci
PcieRpNonSnoopLatencyOverrideMode
PmgCstCfgCtrlLock
PchUsbLtrHighIdleTimeOverride
Usb3HsioTxRate2UniqTran
SiNumberOfSsidTableEntry
IshSpiMisoPadTermination
IshUartRxPadTermination
PcieRpSlotImplemented
PchUsbOverCurrentEnable
EndOfPostMessage
SaPcieItbtRpSnoopLatencyOverrideValue
EnableHwpAutoEppGrouping
SerialIoUartDbg2
ConfigTdpLock
EsataSpeedLimit
PchTsnEnable
PowerLimit3DutyCycle
TTSuggestedSetting
PchEnableDbcObs
IehMode
VmdPort
PchFivrExtVnnRailCtrlRampTmr
PchPmSlpAMinAssert
CstateLatencyControl5TimeUnit
ProcessorTraceEnable
ChipsetInitBinLen
PchTemperatureHotLevel
Usb3HsioTxRate3UniqTranEnable
NumberOfEntries
Custom2ConfigTdpControl
PowerLimit3Lock
SiCustomizedSsid
PchUsb3HsioFilterSelP
DisableVrThermalAlert
PchIoApicEntry24_119
SmbiosType4MaxSpeedOverride
PowerLimit3Time
C1StateUnDemotion
PchDmiAspmCtrl
PchUsb3HsioFilterSelN
PchTTEnable
PcieRpNoFatalErrorReport
Custom1ConfigTdpControl
PmcC10DynamicThresholdAdjustment
PchFivrVccinAuxRetToLowCurModeVolTranTime
BiProcHot
VmdPortFunc
PchUsb3HsioFilterSelNEnable
PchHdaVerbTablePtr
TurboPowerLimitLock
PcieRpSystemErrorOnNonFatalError
PmcUsb2PhySusPgEnable
PcieRpSystemErrorOnFatalError
PchProtectedRangeBase
VccSt
PchFivrExtVnnRailSxEnabledStates
EnableHwpAutoPerCorePstate
CstateLatencyControl1TimeUnit
SaPcieItbtRpSnoopLatencyOverrideMultiplier
PchPmSlpS4MinAssert
PcieRpTransmitterHalfSwing
Usb3HsioTxRate3UniqTran
RenderStandby
ProcessorTraceOutputScheme
SkipFspGop
PchHdaPme
EcCmdProvisionEav
BgpdtHash
Usb3HsioTxRate0UniqTran
UsbOverride
PkgCStateDemotion
EnableAllThermalFunctions
PchPmWolEnableOverride
IshSpiCsPinMuxing
PchIshSpiCsEnable
IshUartCtsPadTermination
PmcV1p05IsExtFetControlEn
MaxRingRatioLimit
PchIshPdtUnlock
IshUartTxPinMuxing
PchFivrExtV1p05RailIccMax
BiosGuardAttr
LogoPtr
CpuBistData
ShowSpiController
PchPmWolOvrWkSts
SataP0T1M
CstCfgCtrIoMwaitRedirection
TcoIrqEnable
PchHdaLinkFrequency
ITbtForcePowerOnTimeoutInMs
SerialIoSpiCsEnable
VmdMemBar2Base
TStates
SiSkipSsidProgramming
TccOffsetTimeWindowForRatl
AmtSolEnabled
PchUsb3HsioCtrlAdaptOffsetCfgEnable
PchFivrExtVnnRailIccMaximum
PchEspiLgmrEnable
SkipPamLock
IshGpGpioPinMuxing
PchUsb3HsioFilterSelPEnable
PchFivrExtVnnRailVoltage
SataPortsDevSlpResetConfig
ProcHotLock
PchDmiTsawEn
SerialIoSpiCsPolarity
PkgCStateLimit
EnableRsr
PmcDbgMsgEn
PchPmPwrCycDur
NumOfDevIntConfig
SerialIoSpiDefaultCsOutput
PchPmPciePllSsc
PxRcConfig
CstateLatencyControl4TimeUnit
PcieRpPmSci
ConfigTdpBios
PmcPdEnable
PchT1Level
PmcModPhySusPgEnable
DisableTurboGt
EnableTcoTimer
IshSpiMisoPinMuxing
IshI2cSclPinMuxing
PcieRpCorrectableErrorReport
C1StateAutoDemotion
PchEspiLockLinkConfiguration
PchFivrExtV1p05RailCtrlRampTmr
SataRstPcieStoragePort
PchFivrExtV1p05RailVoltage
PchPmSlpSusMinAssert
PchHotEnable
PcieRpNonSnoopLatencyOverrideValue
TcoIrqSelect
PcieRpCompletionTimeout
FwProgress
StateRatioMax16
ConfigTdpLevel
IshI2cSdaPinMuxing
PcieRpPhysicalSlotNumber
SerialIoUartParity
TxtEnable
PchLegacyIoLowLatency
PchUsbLtrMediumIdleTimeOverride
PchPmPmeB0S5Dis
SerialIoUartPowerGating
PcieRpSnoopLatencyOverrideValue
PchPmSlpLanLowDc
PchT2Level
CstateLatencyControl2TimeUnit
PchPmSlpS3MinAssert
PchUsb3HsioOlfpsCfgPullUpDwnResEnable
MonitorMwaitEnable
Usb3HsioTxRate1UniqTran
Eist
IshSpiMosiPadTermination
PowerLimit4Lock
Custom3PowerLimit1Time
PcieEnablePort8xhDecode
DualTauBoost
WatchDogEnabled
MaxRatio
Custom2TurboActivationRatio
PchFivrExtVnnRailEnabledStates
ApplyConfigTdp
IshI2cSclPadTermination
PowerLimit2Power
ThermalMonitor
CpuUsb3OverCurrentPin
PchTTLock
Custom1PowerLimit1Time
PchEspiHostC10ReportEnable
Usb3HsioTxRate2UniqTranEnable
SataPortsInterlockSw
EnablePerCorePState
PsysPowerLimit2Power
UfsEnable
PchPmDisableNativePowerButton
VmdVariablePtr
Custom3PowerLimit2
PchPmDisableEnergyReport
Custom3PowerLimit1
DmiTS3TW
EnforceEDebugMode
CstateLatencyControl3TimeUnit
VmdCfgBarBase
DmiSuggestedSetting
SataPortsEnableDitoConfig
SerialIoUartBaudRate
Usb3HsioTxRate1UniqTranEnable
SataPortsHotPlug
MachineCheckEnable
Custom1TurboActivationRatio
Custom2PowerLimit1
Custom2PowerLimit2
VmdMemBar1Base
SaPcieItbtRpLtrConfigLock
SataP0TDispFinit
PchFivrExtVnnRailSxIccMaximum
PchTsnLinkSpeed
SataThermalSuggestedSetting
SaPcieItbtRpLtrEnable
TimedMwait
PchTsnMultiVcEnable
PcieRpFunctionSwap
PcieEqOverrideDefault
SataP1T1M
PsysPowerLimit2
PchLanLtrEnable
SerialIoUartStopBits
SciIrqSelect
C1e
PchFivrExtVnnRailSxIccMax
PowerLimit3
PowerLimit2
PowerLimit1
MeUnconfigOnRtcClear
PcieRpPcieSpeed
PchUsbLtrOverrideEnable
UsbPdoProgramming
Custom3ConfigTdpControl
SataP1TDispFinit
PchFivrDynPm
VmdPortDev
EnableItbm
MinRingRatioLimit
PcieRpFatalErrorReport
MctpBroadcastCycle
EcCmdLock
StateRatio
PchPmVrAlert
DmiTS0TW
LogoSize
PchIoApicId
SaPcieItbtRpForceLtrOverride
PcieRpSnoopLatencyOverrideMultiplier
IshUartTxPadTermination
PchCrid
SataRstPcieDeviceResetDelay
ProcHotResponse
BltBufferSize
MlcStreamerPrefetcher
PcieRpLtrConfigLock
SiSsidTablePtr
SataP0TDisp
PchUsb3HsioOlfpsCfgPullUpDwnRes
BltBufferAddress
PcieRpDetectTimeoutMs
PpinSupport
SataRstRaidDeviceId
PchPmLatchEventsC10Exit
IshUartRxPinMuxing
PpmIrmSetting
EnergyEfficientPState
PchFivrExtV1p05RailIccMaximum
PortResetMessageEnable
PchReadProtectionEnable
BiosGuardModulePtr
PchWriteProtectionEnable
AmtEnabled
PchHdaCodecSxWakeCapability
SiCustomizedSvid
PcieEdpc
TccOffsetLock
PchPmPwrBtnOverridePeriod
SaPcieItbtRpNonSnoopLatencyOverrideMultiplier
WatchDogTimerOs
PchTTState13Enable
PowerLimit1Time
PchT0Level
IshSpiCsPadTermination
SataP0T3M
Usb3HsioTxRate0UniqTranEnable
SataTestMode
PmcOsIdleEnable
PowerLimit4
PcieRpAcsEnabled
PavpEnable
UsbTcPortEn
Additionally, optimize the `reserved` fields across header files.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I976a5762701711fbf000c43c5ff05f9bd93f688f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch ensures AP UART messages are coming over LPSS UART 0 hence,
select required kconfig and program both early and late UART
RX/TX GPIOs accroding to the rex schematics dated 06/27.
BUG=b:224325352
TEST=Able to see AP UART log over LPSS UART0.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7daa8200d1a7cf825dfdfed538573efd57ab2d97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65454
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
BUG=b:224325352
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibcd25ae80d625b623b9a78ff2cd4447e85831cc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65476
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add memory init with placeholder to fill in required memory
configuration parameters. DQ map and Rcomp can be auto probed by
the FSP-M hence, kept it as default.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Able to boot till FSP-M/MRC using MTL simics.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5baa87411c28a20602eb5a7077f00664ccab3ade
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64850
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SMI handler implementation to manage power cycle,
power state transition and Chrome EC events.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I10aab8257fce92aaf913a53c0c9fb6c1a4f5dea6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64623
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable building for Chrome OS and add associated ACPI configuration.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I75cb2d30d699166a056ed9d3c0779816b733b0d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64621
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform EC initialization in bootblock and ramstages. Add associated
ACPI configuration.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2ea934f32b34bc43650e20dd2736f4e652004dc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64622
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ACPI configuration and add DSDT ACPI table.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I8374a9b528f8dff4e23b6bdb4d1368dfd2c79b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64620
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stubbed out GPIO configuration and perform GPIO initialization
during bootblock, romstage and ramstage.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I51426f9557dafc357fc54a971b6f76fac5323e0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64593
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add entry point stubs of each stage for Rex. More functionalities will
be added later.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I2310e58ab92bdb0ce86a9f7284cc0b3e04a2889f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64591
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 32MB flashmap descriptor as below:
Descriptor Region -> 0 - 0x3fff (~16KB)
CSE Partition -> 0x4000 - 0x8fffff (~9MB)
BIOS Region -> 0x900000 - 0x1ffffff (23MB)
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia5ced770bb02c11a9ab39837e66562d2ee22b6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This commit is a stub for rex, which is a an Intel Meteor Lake-P
reference platform.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I46bd8d47b370cacbe0a09bbeaccacf7f1d51d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62969
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add definitions for the GPIO pins on Meteor Lake SoC,
as well as GPIO IRQ routing information and supporting ACPI ASL.
For now, add the following GPIO communities and GPIO groups:
Comm. 0: GPP_CPU, GPP_V, GPP_C
Comm. 1: GPP_A, GPP_E
Comm. 3: GPP_H, GPP_F, SPI0, VGPIO3
Comm. 4: GPP_S, JTAG
Comm. 5: GPP_B, GPP_D, VGPIO
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I7fe9654f22b074a9af18eb7bcdc21812dee77035
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64169
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all of the fields of the amd_cb_config structure were properly
initialized. Rather than initialize each field individually, initialize
the entire structure to 0.
TEST: Boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia343f01bce3956d66d01ce485b43963193c9df31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
