| Age | Commit message (Collapse) | Author |
|---|
|
Move the common enums and variables to tpm.h so it can be
used by multiple drivers.
BUG=chrome-os-partner:53336
Change-Id: I0febe98620d0ddd4ec6b46cd3073e48c12926266
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch sets some magic number in magic undocumented registers that
are rumored to make USB 2.0 signal integrity better on Kevin. I don't
see any difference (unfortunately it doesn't solve the problems with
long cables on my board), but I guess it doesn't hurt either way.
BRANCH=None
BUG=chrome-os-partner:56108,chrome-os-partner:54788
TEST=Booted Kevin with USB connected through Servo. Seems to have
roughly the same failure rate as before.
Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84
Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/370900
Original-Reviewed-by: Guenter Roeck <groeck@chromium.org>
Original-Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-on: https://review.coreboot.org/16265
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add FSP 2.0 support in ramstage.
Populate required Fsp Silicon Init params and configure mainboard
specific GPIOs.
Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for
pre OS screens.
Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16592
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Remove fsp1.1 driver code that adds vbt.bin & use soc/intel/common
instead to add vbt.bin in cbfs.
Also, VBT blob is added to CBFS as RAW type hence when walking the
CBFS to find vbt.bin, search with type as RAW.
Change-Id: I08f2556a34f83a0ea2b67b003e51dcace994361b
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16610
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This implements PRW method for WLAN and configures PCIe wake pin to
generate SCI.
BUG=chrome-os-partner:56483
TEST=Suspend the system into S3 or S0ix. System should resume through wake
event from wifi.
Change-Id: I9bd078c2de19ebcc652b5d981997d2a5b5f0b1b7
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16611
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This implements acpi name for PCIe root port.
BUG=chrome-os-partner:56483
Change-Id: Ifec1529c477f554d36f3932b66f62eea782fdcaa
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16621
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In spd_util.c function mainboard_get_spd_data(), spd_file can
either be NULL or will point to the first byte of the SPD data,
and should not be dereferenced.
Change-Id: I08677976792682cc744ec509dd183eadf5e570a5
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16612
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The correct id string for gm45 is "$VBT CANTIGA ".
This can be found in the gm45 option rom:
"strings vbios.bin | grep VBT".
Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16551
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This implements "Keep VESA framebuffer" behavior on VGA output of gm45.
This patch reuses Linux code to compute vga divisors.
Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16338
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The intel x4x and gm45 have very similar integrated graphic devices.
Currently the x4x native graphic init enables VGA, while gm45 can output
on LVDS.
This patch reuses the x4x graphic initialisation code
to enable output on VGA in gm45 in a way that the behavior is similar to vbios:
If no VGA display is connected the internal LVDS screen is used.
If an external screen is detected on the VGA port it will be used instead.
Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16295
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to ensure bootblock console output shows up in cbmem
console unconditionally select BOOTBLOCK_CONSOLE.
BUG=chrome-os-partner:57513
Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16622
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Unconditionally turn on postcar console for apollolake.
BUG=chrome-os-partner:57513
Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16620
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Implement postcar stage cbmem console support. The postcar stage
is more like ramstage in that RAM is already up. Therefore, in
order to make the cbmem console reinit flow work one needs the cbmem
init hook infrastructure in place and the cbmem recovery called.
This call is added to x86/postcar.c to achieve that. Additionally,
one needs to provide postcar stage cbmem init hook callbacks for
the cbmem console library to use. A few other places need to
become postcar stage aware so that the code paths are taken.
Lastly, since postcar is backed by ram indicate that to the
cbmem backing store.
BUG=chrome-os-partner:57513
Change-Id: I51db65d8502c456b08f291fd1b59f6ea72059dfd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16619
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The console_init(), MTRR printing, and loading ramstage
logic was previously all in assembly. Move that logic
into C code so that future features can more easily be
added into the postcar boot flow.
BUG=chrome-os-partner:57513
Change-Id: I332140f569caf0803570fd635d894295de8c0018
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16618
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The declarations for console_init() were unconditionally
exposed even though there is a Kconfig option. Correct this
by honoring the CONFIG_POSTCAR_CONSOLE condition.
BUG=chrome-os-partner:57513
Change-Id: Id45ae3d7c05a9f4ebcf85c446fc68a709513bb0f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16617
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the boot media is memory mapped mark it as cacheable
after romstage. Otherwise the boot media is uncacheable and
all loads from it take longer. Loading FSP-S alone in ramstage
went down to 17.5ms from 54ms.
BUG=chrome-os-partner:56656
Change-Id: I6703334ba8fe98aca26ba1c995d6d3abb0ddef33
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16613
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a stripped-down version of libgnat. This is somehow comparable to
libgcc but for Ada programs. It's licensed under GPLv3 but with the
runtime library exception. So it's totally fine to link it with our
GPLv2 code and keep it under GPLv2.
Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/11836
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Some remarks on the make process:
o We usually leave Ada specs (.ads files which are like c headers)
together with the bodies (implementations in .adb files) in one
directory. So we have to know, where they live.
o If there is no matching .adb an .ads is a valid source file and
we'll generate an object file from it.
o Object files need to have the same basename as their source files :-/
That's why we put them in build/<class>/ dirs now.
o We track dependencies by looking at the compiler output (.ali files
which accompany every .o). This way we don't need any gnatmake
magic, or even more complex, less portable tools.
For ADAFLAGS_common, I simply copied the CFLAGS_common whilst dropping
everything unsupported and adding sane warning options.
The set of language features is highly restricted (see gnat.adc). This
should suit the embedded nature of coreboot and helps proving absence
of runtime errors with SPARK.
Change-Id: I70df9adbd467ecd2dc7c5c1cf418b7765aca4e93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
There are certain board-specific options for reef variants. The
big one is the DPTF settings. Rearrange the ASL files such
that dsdt.asl is the main landing area. The ACPI options for
Chrome EC are contained in the variant/ec.h header so the
actual code #includes can just reside in dstd.asl. Since most
of the mainboard specific peripherals are auto generated by
the acpigen from devicetree there's no real separate need
for mainboard.asl. The one thing not addressed in this CL
is the notion of a variant having the Chrome EC or not (along
with lid, etc). Future indirection can be provided when needed
to address that requirement.
BUG=chrome-os-partner:56677
Change-Id: I5c888f5fc64913dcff010c28f87e69ac5449e6b6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16604
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
tar doesn't sort by default and takes the order of the OS which is in
most cases the order of creation. Sort by name and set influencing
environment TZ and language to be reproducible.
Change-Id: I3d043952417000d12e81353677f1ea4aa2da4fc1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16556
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Currently we are setting the gpio_tier1_sci in smihandler before
going to S3. But this won't work for S0iX as it happens from Linux
kernel and SMI handler is not involved in that flow. We need to
set this bit i.e. bit 15 in ACPI gpe0a register at 0x430h. The Linux
kernel before going to sleep checks what values are passed through
ASL as wake events (through _PRW), keeps those enabled only and
clears other bits in gpe0 enable registers. So we need to inform
the kernel to keep gpio_tier_sci also set as these are needed for
any wake event. This patch adds ASL code for sleep button device with
HID id PNP0C0E. We are adding _PRW method for sleep button device
with this patch.
BUG=chrome-os-partner:56483
TEST=System resumes from S3 on lidopen, powerbutton and USB wake.
Also from S0iX system is resuming for WIFI wake.
Change-Id: Ie8517cad9cd37c25788c22250894d4f9db344ff9
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16564
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch disables the SataSetMaxGen2 flag.
This flag is a power saving option,
which forces the SATA to GEN2.
Payload SeaBIOS 1.9.1, Lubuntu 16.04, Kernel 4.4.
$ dmesg | grep ahci #before patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
$ dmesg | grep ahci #after patch
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Change-Id: I48361190969e6d38ddb5692f5e54b016b359fbb1
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15906
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The h8s needs around 3s to respond to ps2 commands
Change-Id: I0cf01969975b8dd3839eadf90cb2dac0f1eaafc4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16505
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie7ee547ab34441f93433936334e9881dd7cc0371
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16599
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5cd04d49e90502394b4dd84f6a5a727e02f19fdc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16601
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib1f9926ced1fd382c782f5098eb1ad98330cf655
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I296254d61fdc5c120e1e2abcbecb4677f3216d26
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16598
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In commit 4f2754c
'fsp_broadwell_de: Add Kconfig switch for SERIRQ operation mode'
the default operation mode of SERIRQ was changed from continuous to quiet.
Set the mode to continuous for this mainboard to keep the behavior unchanged.
Change-Id: I7c3675d4ee8cff428621f4e64411738193e654b2
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16576
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fixes the warning:
Use of uninitialized value in concatenation (.) or string at
util/lint/checkpatch.pl line 4739
Change-Id: Idc3c631735a595517d77cb8b8ec67e1ac00b6685
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16357
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This pulls in two fixes that were added to coreboot's checkpatch.pl
script:
- commit 82ef8ada (src/commonlib/lz4_wrapper: Correct inline asm for
unaligned 64-bit copy):
modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
- commit ebef00fa (lint/checkpatch.pl: escape \{ in perl regex to fix
warnings):
Unescaped left brace in regex is deprecated, passed through in regex;
Change-Id: Ia2c712c5b1bb5f67953a9098b5a076e31e3bd8d3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16348
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Update lines to make them shorter than 80 chaacters
- Update using #defines from acpi_ivrs.h
Change-Id: I1bf6cdac00e28f5b0969fd8f98e37c66f8e43110
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16568
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
I put in the decimal values for these instead of the hex values.
Instead of running them through a BCD converter, update them to use
the hex values.
Change-Id: I3fa46f055c3db113758f445f947446dd5834c126
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16567
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Functionally, this should be roughly the same. The only real difference
should be removing the 4 bytes of padding from the end of the 4 byte
entries. The spec mentions a boundary for the 4 byte entries (which we
are ignoring), but doesn't mention a boundary for the 8 byte entries,
and I can't think of any other reason that the padding might be needed.
- Wrap long lines.
- Combine if statements to clean up indentation.
- Use #defines from acpi_ivrs.h to make commands easier to understand.
- Remove padding from 4 byte entries that made them 8 bytes in length.
- Set the pointer p at init, and clear the value at p if the device
we're looking at is enabled instead of setting p in every if statement.
- Look at the command type to update current and length.
- Treat malloc & free as if they were typical instead of coreboot
specific versions. Check to make sure the malloc worked and only
free on the last loop instead of every time.
Change-Id: I79dd5f9e930fad22a09d1af78f33c1d9a88b3bfe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16532
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
This patch removes setting of gpio_tier1_sci_en from mainboard
smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl
now.
BUG=chrome-os-partner:56483
TEST=System resumes from S3 on lidopen, powerbutton and USB wake.
Also from S0iX system is resuming for WIFI wake.
Change-Id: I26fd3fd9fcc83c988bcff1bda4da7a2e3da98ce6
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16566
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch removes setting of gpio_tier1_sci_en from mainboard
smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl
now.
BUG=chrome-os-partner:56483
TEST=System resumes from S3 on lidopen, powerbutton and USB wake.
Also from S0iX system is resuming for WIFI wake.
Change-Id: I066f0907a1c597e6fee09821910c59a8a90cccaa
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/16565
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
move lb_framebuffer function in soc/intel/apollolake
to driver/intel/fsp20 so that fsp 2.0 bases soc's can
use common lb_framebuffer function.
Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16549
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Populate mainboard related Memory Init Params i.e, SPD
Rcomp values, DQ and DQs values.
Change-Id: Id62c43a72a0e34fa2e8d177ce895d395418e2347
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16316
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Populate SoC related Memory initialization params.
Post memory init, set DISB, setup stack and MTRRs using the postcar
funtions provided in postcar_loader.c.
TEST=Build and boot kunimitsu, dram initialization done.
ramstage is loaded.
Change-Id: I8d943e29b6e118986189166d92c7891ab6642193
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16315
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If FSP_M_XIP is selected, then relocate FSP-M binary
while adding it in CBFS so that it can be executed in place.
Change-Id: I2579e8a9be06cfe8cc162337fb1064d15842229f
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16563
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
cbmem --help should not return an error to the OS.
Change-Id: Id00091c679dbb109bc352cf8a81d67c2ae5666ec
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16574
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The TPM driver was largely ignoring the meaning of the command
ready bit in the status register, instead just arbitrarily
sending it at the end of every receive transaction.
Instead of doing this have the command ready bit be set at the
start of a transaction, and only clear it at the end of a
transaction if it is still set, in case of failure.
Also the cr50 function to wait for status and burst count was
not waiting the full 2s that the existing driver does so that
value is increased. Also, during the probe routine a delay is
inserted after each status register read to ensure the TPM has
time to actually start up.
Change-Id: I1c66ea9849e6be537c7be06d57258f27c563c1c2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16591
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
It is very useful to have the ability to see I2C transactions
performed by the host firmware. This patch adds a simple
Kconfig option that will enable debug output.
Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16590
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change modifies the lpss_i2c driver to behave more like
the Linux kernel driver. In particular the controller is only
enabled when processing a transaction, and is disabled after.
This means that errors in one transaction will not affect later
transactions.
Also when disabling the controller the code is supposed to wait
on the enable bit in the "enable status" register and not in
the enable control register. In order to get access to this
register the reg map was expanded to include all registers.
This was tested with the cr50 TPM driver to ensure that if a
transaction does fail that it can be successfully retried instead
of the bus being unusable.
Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16589
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Configure PERST_0 and assign the pin in devicetree.
BUG=chrome-os-partner:55877
TEST=Suspend and resume using 'echo freeze > /sys/power/state'.
System should resume with PCIE and wifi functional.
Change-Id: I39b4d8bba92f352ae121c7552f58480295b48aef
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16350
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch sets tuned RAPL power limit PL1 value to
12W in acpi/dptf.asl for RAPL MSR register. With PL1
as 12W for WebGL and stream case, we measured SoC power
reaching upto 6W. Above 12W PL1 value, we observed that
Soc power going above 6W. With PL1 as 12W, system is
able to leverage full TDP capacity.
BUG=chrome-os-partner:56524
TEST=Built, booted on reef and verifed the package
power with heavy workload.
Change-Id: I8185ce890f27e29bc138ea568af536bc274fe7b8
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/16596
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Due to an incorrect value set for the power limit PL1, the
system is not able to leverage full TDP capacity. FSP code
sets the PL1 value as 6W in RAPL MMIO register based on
fused soc tdp value. This RAPL MMIO register is a physically
separate instance from RAPL MSR register. This patch sets
PL1 value to 15W in RAPL MMIO register.
BUG=chrome-os-partner:56524
TEST=Built, booted on reef and verifed the package power
with heavy workload.
Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/16595
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This configures PERST_0 in devicetree. For boards without
PERST_0, the pin should be disabled. For boards with PERST_0
the correct GPIO needs to be assigned.
BUG=chrome-os-partner:55877
Change-Id: I705009b480e02b4c9b2070bb4f82cb4d552e9a46
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16603
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This implements GNVS variable to store the address of PERST_0,
_ON/_OFF methods to power gate PCIe during S0ix entry, and
PERST_0 assertion/de-assertion methods.
BUG=chrome-os-partner:55877
TEST=Suspend and resume using 'echo freeze > /sys/power/state'.
System should resume with PCIE and wifi functional.
Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16351
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The code was not previously initializing the GNVS structure
to all 0's in the ACPI write tables path. Fix this and also
rearrange the ordering of updating the fields to only handle
the chip_info specific bits till last such that most of the
structure is filled in prior to bailing out in the case of a
bad devicetree.
Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16597
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The SeaBIOS Stable version 1.9.3 was released back in July. This has
just 4 fixes over 1.9.1:
fw/msr_feature_control: add support to set MSR_IA32_FEATURE_CONTROL
fw/pci: Add support for mapping Intel IGD via QEMU
fw/pci: add Q35 S3 support
build: fix .text section address alignment
Change-Id: I527df85b5199942706d1188285c6678bf2f726a1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16254
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Omar Pakker
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Add MKBP as a SCI event: the EC is then able to send events coming from
the sensors.
BUG=b:27849483
TEST=With EC configure to send MKBP events, check sensor information are
retrieved by the kernel.
Change-Id: Ib06241bfcdc8567769baff4f3371cc0c6eab3944
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/16594
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the #include path.
Change-Id: Ifefb2faef6e4fc87152acb21c37dd87e7c14645c
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16294
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
cpu/amd/family_10h-family_15h.
Change-Id: Ia1b155eeb7b67d94cf7aaa7789843a3e4ed3497a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16436
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
mainboard/lenovo/t60.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: I4d87498637d74f96ca5809b0e810755a58fc64ab
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16405
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/agesa/hudson.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: I39cd2afe5e2b6ee3963fd3e949eab1db9e986d71
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16401
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/intel/nehalem.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: I6da4e0a9ef21b3285f4a369c8ddfbdb32a7a3801
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16406
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/intel/ibexpeak.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: Ic569aada9301b37e73196872584e191d553acd86
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16408
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/intel/i82801gx.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: Ia257318a7068b54739f319bfbba35f2a07826940
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16370
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/intel/i82801ix.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: Ibf20e6c08994b09d2a2e68a1a1d38a7a477493aa
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16403
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/intel/gm45.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: I87754799f922cf241fb456071bac04e6fe1eab34
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16402
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/via/vt8237r.
Change-Id: I9c1211e698ef35f56dd71c2c021dea680091c1ee
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16489
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/sis/sis966.
Change-Id: I9e731fedc6f21eaa2685f794ea2172eb4800628b
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16488
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/nvidia/mcp55.
Change-Id: I98ac468940eaf6c456fa95540ec3e718edfe26a7
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16487
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/nvidia/ck801.
Change-Id: I43d4d2175f0b6b9e7e2e6fe665ba3d99d792427c
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16486
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/sb800.
Change-Id: I488cde4504128331106f50b34869905e30f5ab83
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16480
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/sb700.
Change-Id: I44b0be2070719066dd18bbf2882c417caef5d8b2
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16479
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/sb600.
Change-Id: I0227cc0c611324f513f8170c9d8819a88af39b39
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16478
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/rs780.
Change-Id: Ia9929baeec7423e9e2f06324038ddfbec006beb7
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16477
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/rs690.
Change-Id: Ief43393f62312bfe82e960faf56b1e2ec048f4ff
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16476
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/pi/hudson.
Change-Id: I8b22a8d9f0e90afaf0f218c5c0924a78883b7498
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16475
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/cimx.
Change-Id: Ibe2766b956b0ca02be63621aee9a230b16d9923b
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16474
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
southbridge/amd/amd8111.
Change-Id: I76cdc32171b7ce819b53c534b3a5e57e9dd5f3dd
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16473
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/amd/amdht.
Change-Id: I7dfb8f001504c691aeddf1bfbc3be05cc7d31ce4
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16468
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/amd/amdk8.
Change-Id: I5209dd309f0685f83d8a468c50309d5fda77973a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16467
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
northbridge/amd/amdfam10.
Change-Id: I5037feb31c51d06ccc672b0771d5d6e8c0dac949
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16466
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
mainboard/bcom/winnetp680.
Change-Id: I6f57a669f83bed190e90e1b7be01f8c886546e2e
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16465
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
mainboard/gigabyte/*.
Change-Id: Ied62d6234a4f6ea5f851e98a098b2c8f4e3db144
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16439
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace the use of the old device_t definition inside
mainboard/asus/*.
Change-Id: I5ddfba2102854adcc9bbfd75f7acbe76f0152b72
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16438
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This driver is only a prototype driver, real driver
will be integrated at a later time.
Testing: booted successfully.
Change-Id: I372764962e96e5c9c827d524bc369978c5c1fda8
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16554
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I003f6929b00476d46be931773cd35418fe6622a6
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15529
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: Ie9c9297f321c838f86e5536aab29f67a0eeb053d
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15519
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This driver uses BootROM callback to read and write
to the nvm using I2C.
Testing: booted successfully.
Change-Id: I8639af3e004f6631d7e596507c106159835f979f
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16161
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A2BUS is a custom fabric.
Testing: booted successfully.
Change-Id: If6e61f5aa30217eb601ac460d9306166b8433569
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15523
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I168206585f403d2259efe424e563982be661df0b
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16149
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
APMU is the AP power management unit.
It is a separate processor that handles enabling
individual power rails.
This driver handles sending and receiving commands
from/to APMU.
Testing: booted successfully.
Change-Id: I5ae07849f8432bece8a0ae9066a3f786e6e8d2fe
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Load_validate: it loads and validates images from
flash using hash values stored in the BDB.
Testing: booted successfully.
Change-Id: I0b00e8c60ed76622d03cb232d5c4273b4077aae7
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/16148
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: Iaeff9f01dbfad7f313aa237e8c71c36c4ed1e06f
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15509
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing: booted successfully.
Change-Id: I89dee1bbf8b68460897f64bf673b328533e70cd4
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15508
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I1f97b6f159a0ac36c96636066332ba355c056186
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15507
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
Nvidia Tegra210 SOC and Rochchip Rk3399 SOC has been used
as templates to create this directory.
Change-Id: I8cc3e99df915bb289a2f3539db103cd6be90a0b2
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15506
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The serial IRQ (SERIRQ) used by the LPC interface can operate either in
continuous or in quiet mode. Add a Kconfig switch to select the desired
mode. This switch can now be used on mainboard level to enable the
needed mode per mainboard.
Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16575
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since this mainboard provides 4 COM ports on LPC, enable decoding of
the corresponding addresses using the generic LPC decode registers.
Change-Id: I0e93d40dca01d55f3567a18c7ec02269e3bec466
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/16535
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iffa058d9eb1e96a4d1587dc3f8a1740907ffbb32
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16414
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic1ca6c2e1cd06800d7eb2d00ac0b328987d022ef
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16434
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
|
|
Change-Id: I67c73c101b928d104e231064e05d367bf9584730
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16571
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The generated dependencies doesn't work when
used together with our main build system.
Change-Id: I93d26858e961d7e275d586a1b8a26b3d33f3bd41
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16572
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5b1846eb3ef8253695066b315e8a105803390579
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16570
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This creates a config for the Lenovo T60 sound card based
on values taken from vendor bios
(in /sys/class/sound/hwC0D0/init_pin_configs on linux 3.16).
The sound card configuration on the vendor bios is the same
as the one on the Lenovo x60.
It improves the default behavior of the sound card:
- internal microphone is chosen by default
- when jack is inserted it is chosen instead of internal speaker
Change-Id: I44e3eaac437fe4ad97ff2b0eb32d36b33222c09b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16529
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
This change adds armv7-r support for all stages.
armv7-r is an ARM processor based on the Cortex-R series.
Currently, there is support for armv7-a and armv7-m and
armv7-a files has been modfied to accommodate armv7-r by
adding ENV_ARMV7_A, ENV_ARMV7_R and ENV_ARMV7_M constants
to src/include/rules.h.
armv7-r exceptions support will added in a later time.
Change-Id: If94415d07fd6bd96c43d087374f609a2211f1885
Signed-off-by: Hakim Giydan <hgiydan@marvell.com>
Reviewed-on: https://review.coreboot.org/15335
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add placeholders for functions required when skylake
uses FSP2.0 driver, keeping the fsp1.1 flow intact.
Change-Id: I5446f8cd093af289e0f6022b53a985fa29e32471
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
